January 2018 - openSUSE Factory - openSUSE Mailing Lists

[opensuse-factory] Steam can't start properly (success story)
by Mykola Krachkovsky 30 Jan '18

30 Jan '18

Hi, This is not a problem anymore, but maybe would be helpful for someone. At start steam said: Running Steam on opensuse 20180125 64-bit STEAM_RUNTIME is enabled automatically Installing breakpad exception handler for appid(steam)/version(1513371133) libGL error: unable to load driver: i965_dri.so libGL error: driver pointer missing libGL error: failed to load driver: i965 libGL error: unable to load driver: i965_dri.so libGL error: driver pointer missing libGL error: failed to load driver: i965 libGL error: unable to load driver: swrast_dri.so libGL error: failed to load driver: swrast And nothing happens after that. When running with STEAM_RUNTIME=0 the only difference is: STEAM_RUNTIME is disabled by the user steam --reset had no noticeable effect too. I've found some mentions in internet, but none of it seems working (maybe they just too old, some of file aren't there anymore, and running with STEAM_RUNTIME=0 should change something…). There was some time ago problem with separating Mesa/Mesa-dri, so I've checked Mesa-dri-32bit, and yes after installing it it starts, but with other problem, forgot to copy but there was about some absent symbols in X or XCB, I'm not sure why. I've tried to run it with STEAM_RUNTIME=0 again but after installing libva, libvdpau I've found that openSUSE has va 2, but steam want's va 1. So I've run with steam runtime again, and after a while it had started. I think I had to just run steam --reset again. But nevertheless it runs properly now. -- Kind regards, Mykola Krachkovsky -- Найкращі побажання, Микола Крачковський

3 3

[opensuse-factory] TW: Sound issues (or rather plasma panel?)
by Peter Suetterlin 30 Jan '18

30 Jan '18

Hi, Just noticed (for the second time) that my plasma panel showed the volume muted, looking at the config it claimed 'no devices available' Which is strange, as Audacious has been playing music all the time, and changing volume from audacious did nicely work. The system log showed consecutive entries Jan 28 17:17:52 lux rtkit-daemon[3305]: Successfully made thread 7348 of process 7348 (/usr/bin/pulseaudio) owned by 'pit' high priority at nice level -11. Jan 28 17:17:52 lux rtkit-daemon[3305]: Supervising 4 threads of 2 processes of 1 users. Jan 28 17:17:55 lux pulseaudio[7348]: [pulseaudio] socket-server.c: bind(): Address already in use Jan 28 17:17:55 lux pulseaudio[7348]: [pulseaudio] module.c: Failed to load module "module-esound-protocol-unix" (argument: ""): initialization failed. Jan 28 17:17:55 lux pulseaudio[7348]: [pulseaudio] main.c: Module load failed. Jan 28 17:17:55 lux pulseaudio[7348]: [pulseaudio] main.c: Failed to initialize daemon. Jan 28 17:17:55 lux pulseaudio[7345]: [pulseaudio] main.c: Daemon startup failed. This shows up every 15 minutes, with changing PIDs for pulsaudio. All the time PA had been running with another PID, from initial login. I tried restarting pulseaudio (systemctl --user restart pulseaudio), which worked, but still no connection to the panel volume control. For crosscheck I installed pavucontrol, and when I started it suddenly also plasma saw the device again. All fine I thought, started playing music in audacious again - but now the Tray icon of audacious doesn't work. It pops up in the tray, when I start the program, but I cannot use it to control audacious, and when I start playing a song from the application, the tray icon still says 'no media playing'. So something's broken - but what? Is it the panel, pulseaudio, rtkit, the communication bus? (This is latest TW, i.e., 20180126) -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

4 4

[opensuse-factory] python2-pyudev suddenly requires libudev-devel
by Andrei Borzenkov 30 Jan '18

30 Jan '18

Last "zypper dup" installed libudev-devel. It apparently comes as requirement for python2-pyudev due to "require libudev (bsc#1077282)" but that sounds wrong - normally run-time should not require development packages. -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] New Tumbleweed snapshot 20180128 released!
by Dominique Leuenberger 29 Jan '18

29 Jan '18

Please note that this mail was generated by a script. The described changes are computed based on the x86_64 DVD. The full online repo contains too many changes to be listed here. Please check the known defects of this snapshot before upgrading: https://openqa.opensuse.org/tests/overview?distri=opensuse&groupid=1&versio… When you reply to report some issues, make sure to change the subject. It is not helpful to keep the release announcement subject in a thread while discussing a specific problem. Packages changed: clamav (0.99.2 -> 0.99.3) libdvdnav (5.0.3 -> 6.0.0) libdvdread (5.0.3 -> 6.0.0) vm-install (0.9.04 -> 0.10.01) xen yast2-http-server (3.2.2 -> 4.0.0) === Details === ==== clamav ==== Version update (0.99.2 -> 0.99.3) Subpackages: libclamav7 - Update to security release 0.99.3 (bsc#1077732) * CVE-2017-12376 (ClamAV Buffer Overflow in handle_pdfname Vulnerability) * CVE-2017-12377 (ClamAV Mew Packet Heap Overflow Vulnerability) * CVE-2017-12379 (ClamAV Buffer Overflow in messageAddArgument Vulnerability) - these vulnerabilities could have allowed an unauthenticated, remote attacker to cause a denial of service (DoS) condition or potentially execute arbitrary code on an affected device. * CVE-2017-12374 (ClamAV use-after-free Vulnerabilities) * CVE-2017-12375 (ClamAV Buffer Overflow Vulnerability) * CVE-2017-12378 (ClamAV Buffer Over Read Vulnerability) * CVE-2017-12380 (ClamAV Null Dereference Vulnerability) - these vulnerabilities could have allowed an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. * CVE-2017-6420 (bsc#1052448) - this vulnerability allowed remote attackers to cause a denial of service (use-after-free) via a crafted PE file with WWPack compression. * CVE-2017-6419 (bsc#1052449) - ClamAV allowed remote attackers to cause a denial of service (heap-based buffer overflow and application crash) or possibly have unspecified other impact via a crafted CHM file. * CVE-2017-11423 (bsc#1049423) - The cabd_read_string function in mspack/cabd.c in libmspack 0.5alpha allowed remote attackers to cause a denial of service (stack-based buffer over-read and application crash) via a crafted CAB file. * CVE-2017-6418 (bsc#1052466) - ClamAV 0.99.2 allowed remote attackers to cause a denial of service (out-of-bounds read) via a crafted e-mail message. - drop clamav-0.99.2-openssl-1.1.patch (upstream) ==== libdvdnav ==== Version update (5.0.3 -> 6.0.0) - Update to version 6.0.0: * fix crashes on some DVD on describe_title call * fix various crashes related to PGC validity * fix compilation issues * fix API return codes - Add gpg signature ==== libdvdread ==== Version update (5.0.3 -> 6.0.0) Subpackages: libdvdread-devel libdvdread4 - Update to version 6.0.0: * restrict the number of symbols to be exposed to the shared-object * remove dvdinput_error function * improve compatibility with some DVDs (notably the eOne ones) * fix write after free in ifoFree functions * fix possible buffer overflow in open * additional checks on DVDReadBytes arguments * fix leaks - Removed libdvdread-no-internal-crypto.patch because it's not applied anymore. ==== vm-install ==== Version update (0.9.04 -> 0.10.01) - Full conversion of source to python3 from python2. (bsc#1047602) - Graphical components now require Gtk3 - Version 0.10.01 ==== xen ==== Subpackages: xen-doc-html xen-libs xen-tools xen-tools-domU - Fix python3 deprecated atoi call (bsc#1067224) pygrub-python3-conversion.patch - Drop xenmon-python3-conversion.patch ==== yast2-http-server ==== Version update (3.2.2 -> 4.0.0) - Replace SuSEFirewall2 by firewalld. (fate#323460) - 4.0.0 -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] GDM defaults to Wayland even though WaylandEnable=false
by Andrei Borzenkov 29 Jan '18

29 Jan '18

After last update GDM now runs in Wayland session which causes issue with QEMU version I have (I posted this earlier). I still have WaylandEnable=false in /etc/gdm/custom.conf. Is this file no more used by GDM? -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

3 4

[opensuse-factory] [Tumbleweed] ucode-intel
by Achim Gratz 29 Jan '18

29 Jan '18

Should there be a new package, perhaps in Updates, that rolls back the microcode to a level that Intel currently supports? My Haswell just hung on boot (after running with no problems for a few days) and I had to boot with "nopti disable_ucode_ldr" added to the kernel command line. However, that got me back to microcode level 0x20 (the botched Intel blob is 0x23 and I have been on 0x22 before). Regards, Achim. -- +<[Q+ Matrix-12 WAVE#46+305 Neuron microQkb Andromeda XTk Blofeld]>+ Samples for the Waldorf Blofeld: http://Synth.Stromeko.net/Downloads.html#BlofeldSamplesExtra -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

3 4

[opensuse-factory] New Tumbleweed snapshot 20180125 released!
by Dominique Leuenberger 29 Jan '18

29 Jan '18

Please note that this mail was generated by a script. The described changes are computed based on the x86_64 DVD. The full online repo contains too many changes to be listed here. Please check the known defects of this snapshot before upgrading: https://openqa.opensuse.org/tests/overview?distri=opensuse&groupid=1&versio… When you reply to report some issues, make sure to change the subject. It is not helpful to keep the release announcement subject in a thread while discussing a specific problem. Packages changed: babl (0.1.38 -> 0.1.40) drbd (9.0.10+git.b7994aa1 -> 9.0.12+git.7eb4aef) gnome-builder (3.26.2 -> 3.26.3) gnome-software (3.26.4 -> 3.26.5) graphviz graphviz-addons ipset kwebkitpart (1.3.4 -> 1.3.4git.20171117T115813~cca571d) libdazzle (3.26.1 -> 3.26.2) libmbim (1.14.2 -> 1.16.0) libqmi (1.18.0 -> 1.20.0) libsoup (2.60.2 -> 2.60.3) libvirt (3.10.0 -> 4.0.0) llvm4 mariadb perl-List-MoreUtils-XS (0.426 -> 0.428) perl-Socket6 (0.25 -> 0.28) perl-Try-Tiny (0.28 -> 0.30) plymouth (0.9.3+git20171130.fa66a5b -> 0.9.3+git20171220.6e9e95d) python-SecretStorage tlp (1.0 -> 1.1) ucode-intel (20180108 -> 20171117) vim virt-manager xdg-desktop-portal-kde (5.11.5 -> 5.11.95) zypp-plugin (0.6.2 -> 0.6.3) === Details === ==== babl ==== Version update (0.1.38 -> 0.1.40) - Update to version 0.1.40: + Added: - Format "CIE XYZ alpha" color model and formats; - Meson build; being tested in parallel with automake. + New API babl_process_rows for reduced overhead in some scenarios; though bigger gains seen also for regular babl_process with reimplemented branch-free dispatch, and faster cbrt. + Improved reference conversions for formats skipping some of models components. + Fixed gamma handling in indexed/palettized formats and improved gamma precision consistenct in sse2 conversions. ==== drbd ==== Version update (9.0.10+git.b7994aa1 -> 9.0.12+git.7eb4aef) Subpackages: drbd-kmp-default - bsc#1077318, Update to 9.0.12 * Fix a race condition in the device_open code path that can cause an internal counter to go negative - Update to 9.0.11 * Fix bug in compat code: Without this fix large bios are not split. ==== gnome-builder ==== Version update (3.26.2 -> 3.26.3) Subpackages: gnome-builder-lang gnome-builder-plugin-beautifier gnome-builder-plugin-clang gnome-builder-plugin-cmake gnome-builder-plugin-ctags gnome-builder-plugin-devhelp gnome-builder-plugin-gettext gnome-builder-plugin-gnome-code-assistance gnome-builder-plugin-html-completion gnome-builder-plugin-jedi gnome-builder-plugin-jhbuild gnome-builder-plugin-mingw gnome-builder-plugin-symbol-tree gnome-builder-plugin-sysmon gnome-builder-plugin-todo gnome-builder-plugin-vala-pack gnome-builder-plugin-xml-pack - Update to version 3.26.3: + Various improvements to for developing against the host system when running Builder from a flatpak. + Builder will set more fallback environment variable when running under flatpak to ensure subprocesses have a predictable environment. + Various fixes to the shortcut engine and how key-press are captured. + Fixes for invalid cast in LSP format provider. + Various correctness and memory leak fixes. + Symbol tree will try additional symbol resolvers if the first one returned with an empty set. + Updated translations. ==== gnome-software ==== Version update (3.26.4 -> 3.26.5) Subpackages: gnome-software-lang - Update to version 3.26.5: + Add missing locking to gs_plugin_cache_remove(), fixing a possible crash. + Fix various memory leaks spotted by valgrind. + Fix a possible crash triggered by the fwupd plugin. + Do not emit critical warnings when reviewing OS Updates. + fwupd: Use the custom user-agent when downloading firmware. + overview page: Fix a crash when we have no featured apps. + packagekit: Implement repository enabling. + Fix hover CSS for "unknown" and "nonfree" license buttons. + Updated translations. ==== graphviz ==== Subpackages: graphviz-plugins-core libgraphviz6 - Disable building the graphviz-ocaml package: we have no consumer of it, but not building it allows us to elminiate a build cycle. ==== graphviz-addons ==== Subpackages: graphviz-gd graphviz-gnome - Disable building the graphviz-ocaml package: we have no consumer of it, but not building it allows us to elminiate a build cycle. ==== ipset ==== Subpackages: libipset11 - Add 0001-build-do-install-libipset-args.h.patch. ==== kwebkitpart ==== Version update (1.3.4 -> 1.3.4git.20171117T115813~cca571d) Subpackages: kwebkitpart-lang - Update to latest git master * ported away from kdelibs4support * fix translation of the search bar * use the KSslInfoDialog provided by kio * ported to categorized logging - Update translations to the latest versions from svn - Adjust build requirements - Use the ki18n_install() cmake macro to build/install the translations instead of relying on some old cmake files - Change package version to reflect the fact that it's a git snapshot (boo#1076525) - Update Url ==== libdazzle ==== Version update (3.26.1 -> 3.26.2) Subpackages: libdazzle-1_0-0 typelib-1_0-libdazzle-1_0 - Update to version 3.26.2: + Progress menu button will now avoid spinning in some conditions. + Leak fixed in DzlTree text rendering. + Shortcut mneumonics are now properly activated. + Fixes to avoid various deprecated API. + A number of leaks detected by ASAN were fixed. + The directory reaper handles various mtime comparisons more correctly now. + Some G-I annotations were improved. + DzlMenuMerger is more flexible with input. + Some performance improvements when dealing with CSS and other resources paths. ==== libmbim ==== Version update (1.14.2 -> 1.16.0) Subpackages: libmbim-glib4 mbimcli-bash-completion - Update to version 1.16.0: + All the code base was ported to use the GTask based asynchronous operations support instead of the deprecated GSimpleAsyncResult. + New support for AT&T Device Service and Intel Firmware Update Service. + libmbim-glib: - Added: . MBIM_STATUS_ERROR_CONTEXT_NOT_SUPPORTED to MbimStatusError. . Support to detect already open MBIM channels on the Sierra Wireless EM7345. - Avoid using iconv() directly for the UTF-16BE conversions, which makes it possible to use libmbim on systems with a stub iconv() implementation. - Prefer realpath() to canonicalize_file_name(). - Added MBIM_READY_INFO_FLAG_NONE to MbimReadyInfoFlag. + mbimcli: - New: --query-ip-packet-filters, --query-pin-list action, - -atds-query-signal, --atds-query-location and - -intel-modem-reboot actions. - Add cancellability to the query-ip-configuration action. + mbim-proxy: Avoid receiving signals from the parent process. - Add pkgconfig(gio-unix-2.0) BuildRequires: it was being pulled by another pkgconfig module that live in glib2-devel package and used already. ==== libqmi ==== Version update (1.18.0 -> 1.20.0) Subpackages: libqmi-glib5 libqmi-tools - Update to version 1.20.0: + New services: loc - new "LOC" (location) service, which e.g. allows controlling GPS devices in newer modules that don't implement the PDS service. Just some very basic implementation for now. + New request/responses: - nas: new "Attach/Detach" request/response messages. - wds: new "Get Channel Rates" request/response messages. - dms: new 'Swi Get/Set USB Composition' request/response messages. + New TLVs supported in existing messages: - nas: new 'Extended LTE Band Preference' TLV in "Set/Get SSP". - dms: new 'Extended LTE Band Capability' TLV in "Get Band Capabilities". + libqmi: - New: . QMI_DEVICE_SIGNAL_REMOVED signal in the QmiDevice object, propagated through the qmi-proxy. . QMI_CLIENT_VALID property in the QmiClient that allows detecting whether the underlying QmiDevice is usable or not. - Defined additional LTE bands. + qmicli: - New: --wds-set-ip-family, --wds-get-channel-rates, - -uim-read-record, --dms-swi-get-usb-composition and - -dms-swi-set-usb-composition commands. + libqmi-glib: - Prefer realpath() to canonicalize_file_name(). - Avoid signals sent to the qmi-proxy process. + qmi-firmware-update: Support USB3->USB2 mode changes during upgrade. - Update Url to https://www.freedesktop.org/wiki/Software/libqmi/: current libqmi's web page. - Add pkgconfig(gio-unix-2.0) BuildRequires: it was being pulled by another pkgconfig module that live in glib2-devel package and used already. ==== libsoup ==== Version update (2.60.2 -> 2.60.3) Subpackages: libsoup-2_4-1 libsoup-lang typelib-1_0-Soup-2_4 - Update to version 2.60.3: + heap-buffer-overflow in soup_ntlm_parse_challenge() (bgo#788037). + session: don't request Keep-Alive for upgraded connections (bgo#788723). + soup-headers: accept any 3 digit number as message status code (bgo#792124). ==== libvirt ==== Version update (3.10.0 -> 4.0.0) Subpackages: libvirt-client libvirt-daemon libvirt-daemon-config-network libvirt-daemon-config-nwfilter libvirt-daemon-driver-interface libvirt-daemon-driver-libxl libvirt-daemon-driver-lxc libvirt-daemon-driver-network libvirt-daemon-driver-nodedev libvirt-daemon-driver-nwfilter libvirt-daemon-driver-qemu libvirt-daemon-driver-secret libvirt-daemon-driver-storage libvirt-daemon-driver-storage-core libvirt-daemon-driver-storage-disk libvirt-daemon-driver-storage-iscsi libvirt-daemon-driver-storage-logical libvirt-daemon-driver-storage-mpath libvirt-daemon-driver-storage-rbd libvirt-daemon-driver-storage-scsi libvirt-daemon-driver-uml libvirt-daemon-driver-vbox libvirt-daemon-lxc libvirt-daemon-qemu libvirt-daemon-xen libvirt-libs - Update to libvirt 4.0.0 - Many incremental improvements and bug fixes, see http://libvirt.org/news.html - Dropped patches: 2d07f1f0-fix-storage-crash.patch, 69ed99c7-dom0-persistent.patch, 8599aedd-libvirt-guests-dom0-filter.patch, 0f33025a-virt-aa-helper-handle-more-disk-images.patch, b475a91b-add-virStringFilterChars-string-utility.patch, faec1958-lxc-set-hostname-based-on-container-name.patch, 2089ab21-netserver-close-clients-before-stopping-all-drivers.patch, fix-virt-aa-helper-profile.patch, - Patches added to fix upstream bugs: 72adaf2f-revert-qemu-monitor-error-report.patch, 71d56a39-nodedev-fix-parse-PCI-address.patch - CVE-2018-5748, CVE-2017-5715, bsc#1071651, bsc#1076500 ==== llvm4 ==== Subpackages: clang4-checker libLLVM4 libclang4 - n_clang_allow_BUILD_SHARED_LIBRARY.patch * Allow buildling clang with BUILD_SHARED_LIBRARY while the rest is built with LLVM_LINK_LLVM_DYLIB. (bnc#1065464) - Remove clang-devel-static. ==== mariadb ==== Subpackages: libmysqld19 mariadb-client mariadb-errormessages - change owner of mysql-test directory from root to mysql. It also fixes sys_vars.secure_file_priv running under mysql user (e.g. if �t's started via suse-test-run script) that needs to be able to create a test file there during its run [bsc#1012075] ==== perl-List-MoreUtils-XS ==== Version update (0.426 -> 0.428) - updated to 0.428 see /usr/share/doc/packages/perl-List-MoreUtils-XS/Changes 0.428 2017-12-19 - release 0.427_002 without further changes 0.427_002 2017-12-14 - Update ppport.h to 3.37 for improved blead support - Fix RT#123869 - context arg to croak() reported by Zefram - fix RT#123870 - one() returns true on empty list reported by Andy Lester - pamper RT#123868 - $a/$b/$_ refcounting bugs reported by Zefram 0.427_001 2017-12-12 - Fix RT#123613 - build fails on perl >=5.27.4 with -DDEBUGGING, thanks for reporting and the suggested patch goes to Andreas Koenig and Tony Cook ==== perl-Socket6 ==== Version update (0.25 -> 0.28) - updated to 0.28 * aclocal.m4 (IPv6_CHECK_INET_NTOP): inet_ntop(3) may returns IPv4-compatible IPv6 address. [cpan #113950] - includes fix from 0.27 * t/use.t: We still support an environment where AF_INET6 is not defined - includes changes from 0.26 * Makefile.PL: Make Socket6 buildable on Android. [cpan #98181] * system inet_ntop broken in darwin. [cpan #113005] * gailookup.pl.in: Add -r option to do reverse lookup * gailookup.pl.in: Add awareness of AI_ALL and AI_V4MAPPED * gailookup.pl.in: Add -P option to ease to specify port number - cleanup spec file with spec-cleaner - split tests into %check section ==== perl-Try-Tiny ==== Version update (0.28 -> 0.30) - updated to 0.30 see /usr/share/doc/packages/perl-Try-Tiny/Changes 0.30 2017-12-21 07:23:03Z - expand "when" test skippage to more perl versions - updated to 0.29 see /usr/share/doc/packages/perl-Try-Tiny/Changes 0.29 2017-12-19 03:51:26Z - skip tests of "when" and "given/when" usage for perl 5.27.7 *only* (see RT#123908) ==== plymouth ==== Version update (0.9.3+git20171130.fa66a5b -> 0.9.3+git20171220.6e9e95d) Subpackages: libply-boot-client4 libply-splash-core4 libply-splash-graphics4 libply4 plymouth-dracut plymouth-plugin-label plymouth-plugin-label-ft plymouth-plugin-script plymouth-scripts - Update to version 0.9.3+git20171220.6e9e95d: * device-manager: drop superfluous create_pixel_displays_for_renderer call * x11: don't call gdk_display_get_name before gtk_init ==== python-SecretStorage ==== - Fix dbus-python deps to ease the logic and allow python2less build ==== tlp ==== Version update (1.0 -> 1.1) Subpackages: tlp-rdw - Update to version 1.1: * Disc drives: - SATA_LINKPWR_ON_AC/BAT: Try multiple values to support the new recommended ALPM policy "med_power_with_dipm" in Linux 4.15. * Processor: - ENERGY_PERF_POLICY_ON_AC/BAT: Support changed values: performance, balance-performance, default, balance-power, power (gh#linrunner/TLP#297). * ThinkPad Battery: - Support ThinkPad 13 1st & 2nd Gen, E130; new tpacpi-bat version. - tlp-stat --psup: Show ASLbase for tpacpi-bat (in device/path). - tlp discharge: Show state of the battery and force_discharge. * USB: - USB_BLACKLIST_PRINTER: Exclude printers from autosuspend. * Bugfixes: - Intercept the link_power_management_policy write error (gh#linrunner/TLP#271). - Fix AC power detection for MacBook Pro 2017 (gh#linrunner/TLP#283). - Move runtime data from /var/run/tlp to /run/tlp (gh#linrunner/TLP#298). - Fix DEVICES_TO_DISABLE_ON_BAT_NOT_IN_USE="bluetooth" not working as expected (gh#linrunner/TLP#301). - Do not detect wireless input devices batteries as power supply (gh#linrunner/TLP#313). - Remove tlp-1.0-run-mount.patch: fixed upstream. ==== ucode-intel ==== Version update (20180108 -> 20171117) - firmware-CVE-2017-5715.tar.gz: updates for: HSX EP 000306F2 BDX E EP EP4S EX 000406F1 SKX H0 00050654 (bsc#1068032 CVE-2017-5715) - Update to microcode version: 20171117 (bsc#1068839) - - New Platforms -- CFL U0 (06-9e-0a:22) 70 CFL B0 (06-9e-0b:2) 72 SKX H0 (06-55-04:b7) 2000035 GLK B0 (06-7a-01:1) 1e APL Bx (06-5c-09:3) 2c - - Updates -- KBL Y0 (06-8e-0a:c0) 66->70 - Remove code in intel-microcode2ucode.c that refers to GenuineIntel.bin , previously in binary blob package. - Remove binary blob package again. This was intended to be used by linuxrc, but the firmware files can simply be concatenated. - Update to version 20170707 (bsc#1048133, bsc#1043358): KBL H0 (06-8e-09:c0) 62 KBL Y0 (06-8e-0a:c0) 66 KBL B0 (06-9e-09:2a) 5e SKX H0 (06-55-04:97) 2000022 - Update to version 20170511: BDX-ML B0/M0/R0 (06-4f-01:ef) b00001f->b000021 Skylake D0 (06-4e-03:c0) 9e->ba Broadwell ULT/ULX E/F-step (06-3d-04:c0) 24->25 ULT Cx/Dx (06-45-01:72) 1f->20 Crystalwell Cx (06-46-01:32) 16->17 Broadwell Halo E/G-step (06-47-01:22) 16->17 HSX EX E0 (06-3f-04:80) d->f Skylake R0 (06-5e-03:36) 9e->ba Haswell Cx/Dx (06-3c-03:32) 20->22 HSX C0 (06-3f-02:6f) 39->3a - Update to version 20161104. - Update to version 20160714. - Should fix bsc#987358, a bug which got introduced with the last release. - Should finally fix "Intel Skylake bug" (bnc#993639), previous releases since Jan 2016 may or may not have completely fixed it. - Update to version 20160607, no changelog available - Fix dependency on coreutils for initrd macros (boo#958562) - Call missing initrd macro at postun (boo#958562) - Fix Url and Source0 - Add GenuineIntel.bin to ucode-intel-blob - Update to version 20151106 * No changelog available - Use download Url as source - Add ucode-intel-blob subpackage to get the full microcode.dat directly - Update to microcode 20150121. - Pre require coreutils (bnc#914169). - Do not try to reload/update microcode at runtime after package installation. Only supported way of updating microcode is via early microcode update via initrd. bnc#896736 - Update to Intel microcode version 20140624 (bnc#896736, fate#317896) This microcode disables lock elision on CPUs which are known to not work reliable with this feature - Update to Intel microcode version 20140624 (bnc#885213) - Delete mkinitrd scripts. This is done via %rpm regenerate_initrd_* macros (bnc#894160) - Update to Intel microcode version 20140430 (bnc#876073) - Regenerate the initrd in %posttrans (fate#313506) - ucode 20140122, no changelog available. - Loading firmware needs udev to be running - Add mkinitrd script to add Intel microcode to initrd. This is needed because microcode driver is built in or gets loaded automatically via udev early. Therefore the microcode has to be available in initrd already. This must not be mixed up with early micorcode loading. This feature will not be implemented via mkinitrd. Dracut is doing early microcode loading. - bnc#847158 - mkinitrd scripts: - mkinitrd_setup-intel_microcode.sh Adding microcode to the initrd - mkinitrd_boot-intel_microcode.sh Triggering the reload at boot - Correct Supplements string so that the package gets correctly installed on machines with Intel CPUs bnc#847158 - ucode 20130906, no changelog available. - ucode 20130808, as usual, no changelog available. - Run spec-cleaner - Initial packaging. Moved microcode from microctl_ctl package. ==== vim ==== Subpackages: gvim vim-data - Make vim require vim-data bsc#1077352 bsc#1075541 bsc#1074790 ==== virt-manager ==== Subpackages: virt-install virt-manager-common - Replace conditional gtk2-tools with gtk3-tools BuildRequires. ==== xdg-desktop-portal-kde ==== Version update (5.11.5 -> 5.11.95) Subpackages: xdg-desktop-portal-kde-lang - Update to 5.11.95 * New feature release * For more details please see: * https://www.kde.org/announcements/plasma-5.11.95.php - Changes since 5.11.5: * Email portal: add support for attachments * Email portal: add support for attachments ==== zypp-plugin ==== Version update (0.6.2 -> 0.6.3) - Disable singlespec packaging in SLE12* and older distros while it's not working there. They provide python2 packages only. - Fix a bit the obsoletes/provides to allow migration, previously was overwritten by macros - BR python-rpm-macros to build on older distributions - Fix bit python detection conditions on install phase to be better readable and uniform - Switch to singlespec packaging to make it easy to disable either python3 or python2 plugin and make sure all is buildable - version 0.6.3 -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

7 6

Re: [opensuse-factory] btrfs /var changes
by Antoine Belvire 29 Jan '18

29 Jan '18

Hi, I've moved to the new layout so I've written something on how to do it: https://www.alionet.org/content.php?801-openSUSE-change-son-%AB-partitionne…. The explanations are in French but the commands are the same in English ;-) Regards, -- Antoine -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

9 18

Re: [opensuse-factory] TW zypper dup errors trying to remove older package verision not installed
by Robert Munteanu 29 Jan '18

29 Jan '18

(adding list as well) On Sat, Jan 27, 2018 at 6:10 PM, Robert Munteanu <robert.munteanu(a)gmail.com> wrote: >> Is there some other way to get the correct installed packages info >> reflected with zypper? > > zypper could be reading the installed packages from the rpm database. > Try rebuilding it with > > # rpm --rebuilddb > > Robert > > -- > http://robert.muntea.nu/ -- http://robert.muntea.nu/ -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 1

[opensuse-factory] Origami and Geeko themes
by Stasiek 29 Jan '18

29 Jan '18

Hi, I have been working on openSUSE branding for the past few months, and in the process, I have found there was something missing. I booted my trusty old 11.3 DVD with GNOME on top and it hit me. GNOME had an awesome green theme, so green it basically leaked out from both sides of the window, and I knew what I had to do. I downloaded Arc (it has a really nice layout) and made a quick script to get all the colours out of it and started comparing it to the theme, a few nights passed and I had it done. I took some hints from the community, on Discord and on Reddit to see what's up with that, and feedback was generally positive. Modified the CSS a little because some things like fonts needed attention, the top bar on GNOME didn't have dynamic transparency, which is a great feature used too rarely. I also made sure it looked nice on XFCE, which I truly love. Thus, Geeko was born, for GTK based DEs with my love to openSUSE. https://github.com/LelCP/geeko-gtk-theme https://build.opensuse.org/package/show/X11:common:Factory/geeko-gtk-theme Then came a realization. Icons are as an important part of the theme as everything else -- that needed attention too. I really liked some older icons still preserved in Papirus-KDE hanging in OBS since 2016, from which was adopted some of those with the rest of icons from newer versions of Papirus and the Origami icon theme was born too, for KDE and GTK-based DEs with the same love. With __full__ support for YaST (although keep in mind that YaST doesn't support SVG icons so those has to be png first). https://github.com/LelCP/origami-icon-theme https://build.opensuse.org/package/show/X11:common:Factory/origami-icon-the… Both projects can coexist in a way which is beneficial to both of these base projects and vice versa. Most tweaks to Arc will work on Geeko and most tweaks to Geeko will work on Arc, the same with Origami and Papirus. In case of momentous messes such as new versions of GTK that will most likely break everything, whichever project manages to fix issues first can be used as a patch to another one without a problem, which usually happens between stable versions like 3.25 and 3.27, never landing on Tumbleweed, so it can be fixed beforehand (as such the only thing I can give KDE credit for in the case of theming, is it doesn't break so much as GTK). Now is a great time to finally get them in Factory. My goals, of course, would be to make them the default themes on both Leap 15 and Tumbleweed, but considering the nature of, especially Tumbleweed, that might be hard to achieve. I think at least giving people the option to switch themes right from the get-go would be nice. Adwaita and XFCE themes are not cutting it for me, as well for a lot of people, as the theming community showed us already with how popular some themes are. Quoting Richard: "Makes me want to run XFCE for the looks... which is not something I've said since like 2001" (It was most likely about the new splash screen, not exactly this but whatever) LCP [Stasiek] https://lcp.world -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

4 8