November 2016 - openSUSE Factory - openSUSE Mailing Lists

Re: [opensuse-factory] Kwright & Kate
by John L Bowling 10 Nov '16

10 Nov '16

The original install was with Leap 42.1 specifying that kwrite be installed, but not kate or any other related package. All updates were installed within a day or two. This process worked well with 13.1 The only fix was to install kate. And the recent addition of tabs caused confusion with documents apparently disappearing. No, I don't spend several hours checking details in the documentation with every fresh install, and updates are currently big mysteries as to what the changes are. John Bowling On 11/06/2016 01:45 PM, Wolfgang Bauer wrote: > Am Samstag, 5. November 2016, 07:44:14 schrieb Dave Plater: >> We should take this discussion to bugzilla as it seems that kwrite is >> missing a dependency. Could you file a bug and add davejplater(a)gmail.com >> as cc. > Sorry, but what dependency do you think is missing? > > kwrite does *not* need kate to be installed. > I just recently tried it on a Tumbleweed KDE LiveCD (which doesn't have kate > installed, because kate is not installed at all on a standard KDE > installation), and it worked fine. > > I think it would be interesting to know what kind of installation the OP had > to be able to tell more. > Maybe something is missing if one tries to install kwrite on a non-KDE > installation... > At least on a KDE installation, it should work fine. > > Kind Regards, > Wolfgang > -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

3 2

[opensuse-factory] Tumbleweed's polkit rule reads authentication is required to mount another partition on my drive
by Roman Bysh 10 Nov '16

10 Nov '16

Hi everybody, Tumbleweed's polkit is always asking me to type in a my password to access another partition on the same drive. I would like to have permanent access as I did in previous version of openSUSE since I am the only user. Cheers! Roman KEY ID: 77CC66DE ================

2 3

[opensuse-factory] create own yast2/zypper repository
by mh＠mike.franken.de 10 Nov '16

10 Nov '16

Hi, I tried to create my own repository for zypper and/or Yast2 following the description on https://en.opensuse.org/SDB:Creating_YaST_installation_sources (third alternative). I can add the newly created repo using "zypper ar" or "Yast2 repositories", but when trying to install software via zypper from it, no package is found. Yast2 gives an error when leaving the repository module, that it can't update metadata somewhere. I guess, the above mentioned description is a bit outdated and misses some steps. Is there a newer description somewhere or can anyone tell me, what I have to do besides the steps from the description? TIA. Bye. Michael. -- Michael Hirmke -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

3 4

[opensuse-factory] YaST: highlights of development sprint 27
by Ancor Gonzalez Sosa 10 Nov '16

10 Nov '16

Do you know what SUSE CASP is? Find it out in the latest YaST team report at https://lizards.opensuse.org/?p=12095 Enjoy -- Ancor González Sosa YaST Team at SUSE Linux GmbH -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] why PowerPC TW isos not updated in download server ?
by Normand 10 Nov '16

10 Nov '16

Why PowerPC Tumbleweed isos not updated in download.opensuse.org (1) ? The last isos are dated September 27th while last openQA tests are 20161107 (2) Does it need a manual action, or is it part of an automatic process ? May be related to that there is one remaining ppc64 test (3) that failed as not found kbd-legacy. what is us supposed to come from ? (1) http://download.opensusoe.org/ports/ppc/tumbleweed/iso/ (2) https://build.opensuse.org/project/dashboard/openSUSE:Factory:PowerPC (3) https://openqa.opensuse.org/tests/301759#step/start_install/16 (4) https://software.opensuse.org/package/kbd-legacy?search_term=kbd-legacy -- Michel Normand -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 1

[opensuse-factory] TW 20161104 - system tools do not connect via hostname with wins included (System error) - Samba bug
by René Krell 10 Nov '16

10 Nov '16

HI all, after updating to the latest Tumbleweed snaphot 20161104 I get strange network connection problems when using hostnames although nslookup can resolve them. Example: rkrell:~ # ping mail.google.com ping: mail.google.com: System error rkrell:~ # nslookup > www.heise.de Server: 192.168.0.1 Address: 192.168.0.1#53 Non-authoritative answer: Name: www.heise.de Address: 193.99.144.85 > exit rkrell:~ # ping 193.99.144.85 PING 193.99.144.85 (193.99.144.85) 56(84) bytes of data. 64 bytes from 193.99.144.85: icmp_seq=1 ttl=236 time=26.8 ms 64 bytes from 193.99.144.85: icmp_seq=2 ttl=236 time=24.5 ms ^C --- 193.99.144.85 ping statistics --- 2 packets transmitted, 2 received, 0% packet loss, time 1002ms rtt min/avg/max/mdev = 24.597/25.734/26.871/1.137 ms I've "googled" around about this rare topic and found this discussion: https://bbs.archlinux.org/viewtopic.php?id=218877 In fact, I had a changed line in /etc/nsswitch.conf (working in all previous Tumbleweed snapshots: hosts: files wins dns instead of: hosts: files dns Changing it back made my network working again immediately without reboot. I'd appreciate a patch to Samba 4.5 (smbclient) if possible, which apparently caused this issue. Thank you very much. René -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 2

[opensuse-factory] suse 13.2: uncredited source used in shadowutils: where from?
by L. A. Walsh 09 Nov '16

09 Nov '16

I was trying to figure out a behavior/feature in shadowutils and whether it came from the package maintainers, or was an OpenSuse addition as wanted to know where the scripts: "useradd.local" and "groupadd.local" came from. I wanted to report one or more problems affecting both scripts and didn't know if it should be reported to the package "owners"[?] or opensuse. I installed the source rpm for "shadowutils-4.1.5" and then thought it might be as fast or faster to look at the sources from the package URL citing http://pkg-shadow.alioth.debian.org/ . On the site, I see the latest tars being 4.1.4, 4.2, and 4.2.1. I see no listing for the tarball used by OpenSUSE, neither 4.1.5.1 nor 4.1.5. I'm wondering where these packages came from (as well as wondering how 4.1.5 was "listed as being from the "alioth" source server when the source server has no such tar. It may be no big deal, but usually when I see a URL where the source tar is supposed to be from, it's usually verifiable as being there and, for the times I've checked, is usually the same tarball. In this case, taking a security-minded stance, I can't check any signature or checksum to verify that the tarball used to create opensuse binaries was from the attributed website. I'm sure there's some good explanation, but isn't this something that shouldn't happen for released software? Where *DID*, 4.1.5 (and 4.1.5.1) come from -- are they opensuse created versions? Should opensuse be creating versions of packages that are easily confused with the version numbers used on the original site? I.e. normally, I see something like 4.1.4_2.37, where the part after the "_" is some suse-specific/internal version. If the package owners didn't created the source for suse's package, who did? While I might have some belief in the security of the package on the package's source site, what is known about the 4.1.5.1 or 4.1.5 packages? Could they have a malware or a rootkit embedded -- since they aren't easily verified for content as they didn't come from the official source for this package... ??? Thanks... -l -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

9 12

[opensuse-factory] "latest" ca-certs from a year ago can't be installed on 13.2?
by Linda Walsh 09 Nov '16

09 Nov '16

Is this correct? Looking in the latest tumbleweed snap for 20161108, I see ca-certificates-2+git20151110.c15593c-1.2.noarch.rpm as a new cert package -- but it won't install on 13.2. Why do I need p11-kit-tools to be updated to install updated certs? Also, where would be certs for the past year? (if the date on the rpm-name is to be believed, it wouldn't have any root-certs generated in the last year. Given all the cert problems in the past year, I'd think it would be important to update these. No? -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] Help with VirtualBox build error
by Larry Finger 09 Nov '16

09 Nov '16

I would appreciate if someone would look at the build log at https://build.opensuse.org/package/live_build_log/Virtualization/virtualbox…, which fails due to a missing directory. What am I doing wrong? This package builds correctly locally and seems to be OK for Factory and Leap 42.2, but gets this failure for Kernel_stable_standard. Thanks, Larry -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 1

[opensuse-factory] New Tumbleweed snapshot 20161108 released!
by Dominique Leuenberger 09 Nov '16

09 Nov '16

Please note that this mail was generated by a script. The described changes are computed based on the x86_64 DVD. The full online repo contains too many changes to be listed here. Please check the known defects of this snapshot before upgrading: https://openqa.opensuse.org/tests/overview?distri=opensuse&groupid=1&versio… When you reply to report some issues, make sure to change the subject. It is not helpful to keep the release announcement subject in a thread while discussing a specific problem. Packages changed: brltty desktop-translations epiphany (3.22.1 -> 3.22.2) gfxboot (4.5.18 -> 4.5.19) gnome-chess (3.22.0 -> 3.22.2) gnome-sudoku (3.22.0 -> 3.22.2) gtkspell3 (3.0.8 -> 3.0.9) krita python3-setuptools (28.7.1 -> 28.8.0) wayland yast2 (3.2.2 -> 3.2.3) yast2-country (3.1.32 -> 3.2.0) === Details === ==== brltty ==== Subpackages: brltty-driver-at-spi2 brltty-driver-brlapi brltty-driver-espeak brltty-driver-speech-dispatcher brltty-driver-xwindow libbrlapi0_6 python3-brlapi xbrlapi - Fix syntax error in rule files brltty-udev-rule.patch ==== desktop-translations ==== - Update translations from SVN. ==== epiphany ==== Version update (3.22.1 -> 3.22.2) Subpackages: epiphany-lang gnome-shell-search-provider-epiphany - Update to version 3.22.2: + Improvements to password form autofill handling (bgo#772530). + Fix adblocker sometimes blocking the main resource. + Fully delete history database when clearing history. + Again restrict web apps to their initial domain. + Enable Accept-Language and spellchecking for current locale by default. + Fix overview thumbnails sometimes being duplicated. + Added session safety check to avoid saving corrupted sessions. + Ensure error page buttons expand to fit translations. + Miscellaneous code safety, crasher, critical warning fixes. + Updated translations. ==== gfxboot ==== Version update (4.5.18 -> 4.5.19) - Update ca.po - 4.5.19 ==== gnome-chess ==== Version update (3.22.0 -> 3.22.2) - Update to version 3.22.2: + Remove trailing whitespace. + Updated translations. ==== gnome-sudoku ==== Version update (3.22.0 -> 3.22.2) - Update to version 3.22.2: + Use AX_REQUIRE_DEFINED in configure.ac. + Stop using intltool. + Update MSGCTXT and PACKAGE_GNU in Makevars. + Keep POTFILES in in alphabetical order. + Remove trailing whitespace. + Add translator comments to the .desktop file. + Updated translations. - Drop intltool BuildRequires: No longer needed. ==== gtkspell3 ==== Version update (3.0.8 -> 3.0.9) - Update to version 3.0.9: + Add gtk_spell_checker_add_to_dictionary. + Add gtk_spell_checker_ignore_word. + Fix possible use-after-free in gtk_spell_checker_decode_language_code. - Change source compression to tar.xz. ==== krita ==== Subpackages: krita-lang - Update package summary, description and RPM group (boo#1006479) ==== python3-setuptools ==== Version update (28.7.1 -> 28.8.0) - update to version 28.8.0: * #629: Per the discussion, refine the sorting to use version value order for more accurate detection of the latest available version when scanning for packages. See also #829. * #837: Rely on the config var "SO" for Python 3.3.0 only when determining the ext filename. ==== wayland ==== Subpackages: libwayland-client0 libwayland-client0-32bit libwayland-cursor0 libwayland-server0 libwayland-server0-32bit - Add wayland-wl_array_Set_data_to_invalid_address_after_free.patch: Crash fix patch from upstream git. ==== yast2 ==== Version update (3.2.2 -> 3.2.3) - fix do not show again for packages downloaded to temporary directory (bsc#481011) - remove icons from signature check dialogs (bsc#875201) - 3.2.3 ==== yast2-country ==== Version update (3.1.32 -> 3.2.0) Subpackages: yast2-country-data - language add-on no longer exists, so suggest to enable online repositories for languages only partially available on media (bsc#1008082) - 3.2.0 -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] package 'pin' needed?
by Petr Gajdos 09 Nov '16

09 Nov '16

Hello, I intend to fill a delete request against openSUSE:Factory/pin. Is there a reason to keep it? Petr -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

10 25

[opensuse-factory] package 'pin' needs maintainer
by Petr Gajdos 09 Nov '16

09 Nov '16

Hi, it seems that there are some users heavily using pin. I do not ,so let's ask whether also some of them would like to keep eye on it. Petr -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] New Tumbleweed snapshot 20161107 released!
by Dominique Leuenberger 09 Nov '16

09 Nov '16

Please note that this mail was generated by a script. The described changes are computed based on the x86_64 DVD. The full online repo contains too many changes to be listed here. Please check the known defects of this snapshot before upgrading: https://openqa.opensuse.org/tests/overview?distri=opensuse&groupid=1&versio… When you reply to report some issues, make sure to change the subject. It is not helpful to keep the release announcement subject in a thread while discussing a specific problem. Packages changed: busybox (1.24.1 -> 1.25.1) fdupes (1.51 -> 1.6.1) flatpak git (2.10.1 -> 2.10.2) gnome-packagekit harfbuzz (1.3.2 -> 1.3.3) libsamplerate (0.1.8 -> 0.1.9) perl-Config-General (2.62 -> 2.63) webkit2gtk3 (2.14.1 -> 2.14.2) yast2-schema (3.1.8 -> 3.2.0) yast2-storage (3.1.105 -> 3.2.0) === Details === ==== busybox ==== Version update (1.24.1 -> 1.25.1) - update to 1.25.1: * fixes for hush, gunzip, ip route, ntpd - includes changes from 1.25.0: * many added and expanded implementations of command options - includes changes from 1.24.2: * fixes for build system (static build with glibc fixed), truncate, gunzip and unzip. ==== fdupes ==== Version update (1.51 -> 1.6.1) - Drop 50_bts284274_hardlinkreplace.dpatch. The --linkhard option added by this patch has an implementation bug that can cause data loss. https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=677419 has more details. - Update to version 1.6.1. The following patches have been applied upstream and were dropped: * 0001-restore-pristine-code.patch * 0002-Added-to-escape-minus-signs-in-manpage-lintian-warni.patch * 0003-Fix-a-typo-in-a-manpage-bts353789.patch * 0005-add-summarize-to-manpage-bts481809.patch * 0006-add-nohidden-support-bts511702.patch * 0007-Disambiguate-the-options-recurse-and-recurse-bts5371.patch * 0008-speedup-the-file-compare.patch * 0009-glibc-endianness-check-in-md5.patch * 0010-add-permissions-mode.patch * 0011-add-an-option-to-sort-duplicate-files-by-name.patch - 50_bts284274_hardlinkreplace.dpatch had to be refreshed. ==== flatpak ==== - Require flatpak by flatpak-devel: xdg-desktop-portal expects to find org.freedesktop.portal.Documents.xml, which is part of flatpak. It's fair to assume everything to be present when pulling in the -devel package. ==== git ==== Version update (2.10.1 -> 2.10.2) Subpackages: git-core git-cvs git-daemon git-email git-gui git-svn git-web gitk - git 2.10.2: * minor bug fixes * internal code improvements * documentation updates ==== gnome-packagekit ==== - Replace pkgconfig(libsystemd-login) for pkgconfig(libsystemd) BuildRequires, this was changed upstream during the 3.22 development, but we missed changing it. ==== harfbuzz ==== Version update (1.3.2 -> 1.3.3) Subpackages: harfbuzz-devel libharfbuzz-icu0 libharfbuzz0 libharfbuzz0-32bit - Update to version 1.3.3: + Implement parsing of OpenType MATH table. ==== libsamplerate ==== Version update (0.1.8 -> 0.1.9) Subpackages: libsamplerate-devel libsamplerate0 - update to version 0.1.9 (2016-09-23) * Relicense under 2 clause BSD license. * Minor bug fixes and upates. - remove 0001-src-src_sinc.c-Fix-a-read-beyond-end-of-coefficent-a.patch since it was fixed upstream ==== perl-Config-General ==== Version update (2.62 -> 2.63) - updated to 2.63 see /usr/share/doc/packages/perl-Config-General/Changelog 2.63 - fix for rt.cpan.org#116340: do only consider a backslash as meta escape char, but not if it appears on it's own, as it happens on windows platforms. Thanks to for finding and tracking it down. ==== webkit2gtk3 ==== Version update (2.14.1 -> 2.14.2) Subpackages: libjavascriptcoregtk-4_0-18 libwebkit2gtk-4_0-37 typelib-1_0-JavaScriptCore-4_0 typelib-1_0-WebKit2-4_0 webkit2gtk-4_0-injected-bundles - Update to version 2.14.2: + Expose WebKitDOMHTMLInputElement APIs for form autofill in unstable DOM API. + Properly update WebKitWebView and WebKitWebPage URI properties when request is modified by WebKitWebPage:send-request signal. + Restore user agent quirk for Yahoo. + Dot not leak the default WebKitWebsiteDataManager in WebKitWebContext. + Use eglGetPlatformDisplay when available instead of eglGetDisplay. + Avoid strstr() when checking (E)GL extensions. + Fix several crashes and rendering issues. + Fix the build with ENABLE_OPENGL=OFF and allow to build on Wayland without OpenGL again. + Updated translations. ==== yast2-schema ==== Version update (3.1.8 -> 3.2.0) - Add support to enable copy-on-write for Btrfs subvolumes (FATE#320342) - Add support to omit the Btrfs default subvolume name (FATE#317775) - Add support to define SSH authorized_keys (FATE#319471) - 3.2.0 ==== yast2-storage ==== Version update (3.1.105 -> 3.2.0) - Improve support to redefine/detect the Btrfs default subvolume name (FATE#320342 and FATE#317775) using AutoYaST. - 3.2.0 - Make subvolumes configurable in control.xml (fate#321737) - 3.1.105 -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] Tumbleweed Snapshot 20161105 - Rescue System, no German
by Peter Mc Donough 08 Nov '16

08 Nov '16

Hi, I tried the rescue option with Tumbleweed, I could set it to German, but the setting wasn't registered. Keyboard?? exampl: shutdown /r now. Well, minus "-" did the job. cu Peter -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 1

[opensuse-factory] Leap 42.2 RC2 - should sh link to bash?
by Milan Zimmermann 08 Nov '16

08 Nov '16

After installing RC2, I noticed something wrong in my org babel sh scripts; and looking into it further, I noticed: me@server:~/tmp> sh sh-4.3$ exit exit me@server:~/tmp> which sh /usr/bin/sh me@server:~/tmp> ls -l /usr/bin/sh lrwxrwxrwx 1 root root 9 Nov 5 11:49 /usr/bin/sh -> /bin/bash m Is sh supposed to just link to bash? Thanks, -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

12 18

[opensuse-factory] Updating idedma script [Was: New Tumbleweed snapshot 20160812 released!]
by Carlos E. R. 08 Nov '16

08 Nov '16

On 2016-11-08 08:32, Dr. Axel Braun wrote: > Am Dienstag, 8. November 2016, 04:19:29 schrieb Carlos E. R.: >> The file /usr/lib/udev/rules.d/56-idedma.rules has to be modified from: >> >> # start idedma script for each added IDE device >> ACTION=="add", SUBSYSTEM=="block", KERNEL=="hd*[!0-9]", >> RUN+="/lib/udev/idedma.sh $env{DEVNAME}" >> >> to something like >> >> # start idedma script for each added IDE device >> ACTION=="add", SUBSYSTEM=="block", KERNEL=="sd*[!0-9]", >> RUN+="/lib/udev/idedma.sh $env{DEVNAME}" > > where is the difference between the lines? The old one had "hd*[!0-9]", the new one "sd*[!0-9]". Also the script is now hanging from /usr/lib... I have this already working on my machine, but I intend to modify it more, time and skills permitting. I want the configuration files to use disk-by-id references instead of entries like /dev/sda, which are not stable. -- Cheers / Saludos, Carlos E. R. (from 13.1 x86_64 "Bottle" at Telcontar)

1 0

[opensuse-factory] New Tumbleweed snapshot 20160812 released!
by Dominique Leuenberger 08 Nov '16

08 Nov '16

Please note that this mail was generated by a script. The described changes are computed based on the x86_64 DVD. The full online repo contains too many changes to be listed here. Please check the known defects of this snapshot before upgrading: https://openqa.opensuse.org/tests/overview?distri=opensuse&groupid=1&versio… When you reply to report some issues, make sure to change the subject. It is not helpful to keep the release announcement subject in a thread while discussing a specific problem. Packages changed: MozillaFirefox (47.0.1 -> 48.0) MozillaThunderbird NetworkManager-openvpn bluedevil5 (5.7.2 -> 5.7.3) breeze (5.7.2 -> 5.7.3) breeze-gtk (5.7.2 -> 5.7.3) breeze4-style (5.7.2 -> 5.7.3) bundle-lang-common bundle-lang-gnome bundle-lang-kde curl (7.49.1 -> 7.50.1) dcraw (9.26.0 -> 9.27.0) evolution (3.20.4 -> 3.20.5) evolution-data-server (3.20.4 -> 3.20.5) evolution-ews (3.20.4 -> 3.20.5) fcitx gfxboot (4.5.13 -> 4.5.14) gnome-tweak-tool grsync hdparm installation-images-openSUSE (14.264 -> 14.266) kactivitymanagerd (5.7.2 -> 5.7.3) kcm_sddm (5.7.2 -> 5.7.3) kde-cli-tools5 (5.7.2 -> 5.7.3) kde-gtk-config5 (5.7.2 -> 5.7.3) kde-user-manager (5.7.2 -> 5.7.3) kexec-tools (2.0.12 -> 2.0.13) khotkeys5 (5.7.2 -> 5.7.3) kinfocenter5 (5.7.2 -> 5.7.3) kmenuedit5 (5.7.2 -> 5.7.3) kscreen5 (5.7.2 -> 5.7.3) kscreenlocker (5.7.2 -> 5.7.3) ksshaskpass5 (5.7.2 -> 5.7.3) ksysguard5 (5.7.2 -> 5.7.3) kwin5 (5.7.2 -> 5.7.3) libe-book libkdecoration2 (5.7.2 -> 5.7.3) libkscreen2 (5.7.2 -> 5.7.3) libksysguard5 (5.7.2 -> 5.7.3) libmspub libpagemaker milou5 (5.7.2 -> 5.7.3) mozilla-nss (3.23 -> 3.24) nghttp2 (1.12.0 -> 1.13.0) oxygen5 (5.7.2 -> 5.7.3) plasma-nm5 (5.7.2 -> 5.7.3) plasma5-addons (5.7.2 -> 5.7.3) plasma5-desktop (5.7.2 -> 5.7.3) plasma5-integration (5.7.2 -> 5.7.3) plasma5-openSUSE plasma5-pa (5.7.2 -> 5.7.3) plasma5-workspace (5.7.2 -> 5.7.3) polkit-kde-agent-5 (5.7.2 -> 5.7.3) powerdevil5 (5.7.2 -> 5.7.3) python-gtksourceview python-ldap (2.4.25 -> 2.4.27) qemu qemu-linux-user rubygem-gem2rpm skype4pidgin (1.1 -> 1.2.1) systemsettings5 (5.7.2 -> 5.7.3) tidy ufraw xfce4-terminal (0.6.3 -> 0.6.90) yast2-firstboot (3.1.14 -> 3.1.15) === Details === ==== MozillaFirefox ==== Version update (47.0.1 -> 48.0) Subpackages: MozillaFirefox-translations-common - Fix for possible buffer overrun (bsc#990856) CVE-2016-6354 (bmo#1292534) [mozilla-flex_buffer_overrun.patch] - Update mozilla-gtk3_20.patch to latest version from Fedora. - update to Firefox 48.0 (boo#991809) * requires NSS 3.24 * Process separation (e10s) is enabled for some of you * Add-ons that have not been verified and signed by Mozilla will not load * WebRTC embetterments * The media parser has been redeveloped using the Rust programming language * better Canvas performance with speedy Skia support security fixes: * MFSA 2016-62/CVE-2016-2835/CVE-2016-2836 Miscellaneous memory safety hazards * MFSA 2016-63/CVE-2016-2830 (bmo#1255270) Favicon network connection can persist when page is closed * MFSA 2016-64/CVE-2016-2838 (bmo#1279814) Buffer overflow rendering SVG with bidirectional content * MFSA 2016-65/CVE-2016-2839 (bmo#1275339) Cairo rendering crash due to memory allocation issue with FFmpeg 0.10 * MFSA 2016-66/CVE-2016-5251 (bmo#1255570) Location bar spoofing via data URLs with malformed/invalid mediatypes * MFSA 2016-67/CVE-2016-5252 (bmo#1268854) Stack underflow during 2D graphics rendering * MFSA 2016-68/CVE-2016-0718 (bmo#1236923) Out-of-bounds read during XML parsing in Expat library * MFSA 2016-69/CVE-2016-5253 (bmo#1246944) Arbitrary file manipulation by local user through Mozilla updater and callback application path parameter (Windows-only) * MFSA 2016-70/CVE-2016-5254 (bmo#1266963) Use-after-free when using alt key and toplevel menus * MFSA 2016-71/CVE-2016-5255 (bmo#1212356) Crash in incremental garbage collection in JavaScript * MFSA 2016-72/CVE-2016-5258 (bmo#1279146) Use-after-free in DTLS during WebRTC session shutdown * MFSA 2016-73/CVE-2016-5259 (bmo#1282992) Use-after-free in service workers with nested sync events * MFSA 2016-74/CVE-2016-5260 (bmo#1280294) Form input type change from password to text can store plain text password in session restore file * MFSA 2016-75/CVE-2016-5261 (bmo#1287266) Integer overflow in WebSockets during data buffering * MFSA 2016-76/CVE-2016-5262 (bmo#1277475) Scripts on marquee tag can execute in sandboxed iframes * MFSA 2016-77/CVE-2016-2837 (bmo#1274637) Buffer overflow in ClearKey Content Decryption Module (CDM) during video playback * MFSA 2016-78/CVE-2016-5263 (bmo#1276897) Type confusion in display transformation * MFSA 2016-79/CVE-2016-5264 (bmo#1286183) Use-after-free when applying SVG effects * MFSA 2016-80/CVE-2016-5265 (bmo#1278013) Same-origin policy violation using local HTML file and saved shortcut file * MFSA 2016-81/CVE-2016-5266 (bmo#1226977) Information disclosure and local file manipulation through drag and drop * MFSA 2016-82/CVE-2016-5267 (bmo#1284372) Addressbar spoofing with right-to-left characters on Firefox for Android (Android only) * MFSA 2016-83/CVE-2016-5268 (bmo#1253673) Spoofing attack through text injection into internal error pages * MFSA 2016-84/CVE-2016-5250 (bmo#1254688) Information disclosure through Resource Timing API during page navigation - removed obsolete mozilla-gcc6.patch - Update description and screenshots in appdata.xml file. ==== MozillaThunderbird ==== Subpackages: MozillaThunderbird-translations-common - Fix for possible buffer overrun (bsc#990856) CVE-2016-6354 (bmo#1292534) [mozilla-flex_buffer_overrun.patch] ==== NetworkManager-openvpn ==== Subpackages: NetworkManager-openvpn-gnome - Update to GNOME 3.20 Fate#318572 ==== bluedevil5 ==== Version update (5.7.2 -> 5.7.3) - Update to 5.7.3 * New bugfix release * For more details please see: https://www.kde.org/announcements/plasma-5.7.3.php ==== breeze ==== Version update (5.7.2 -> 5.7.3) Subpackages: breeze5-cursors breeze5-decoration breeze5-style breeze5-wallpapers - Update to 5.7.3 * New bugfix release * For more details please see: https://www.kde.org/announcements/plasma-5.7.3.php ==== breeze-gtk ==== Version update (5.7.2 -> 5.7.3) Subpackages: gtk2-metatheme-breeze gtk3-metatheme-breeze metatheme-breeze-common - Update to 5.7.3 * New bugfix release * For more details please see: https://www.kde.org/announcements/plasma-5.7.3.php ==== breeze4-style ==== Version update (5.7.2 -> 5.7.3) - Update to 5.7.3 * New bugfix release * For more details please see: https://www.kde.org/announcements/plasma-5.7.3.php ==== bundle-lang-common ==== Subpackages: bundle-lang-common-cs bundle-lang-common-da bundle-lang-common-de bundle-lang-common-el bundle-lang-common-en bundle-lang-common-es bundle-lang-common-fr bundle-lang-common-hu bundle-lang-common-it bundle-lang-common-ja bundle-lang-common-pl bundle-lang-common-pt bundle-lang-common-ru bundle-lang-common-zh - Update package list. ==== bundle-lang-gnome ==== Subpackages: bundle-lang-gnome-cs bundle-lang-gnome-da bundle-lang-gnome-de bundle-lang-gnome-el bundle-lang-gnome-en bundle-lang-gnome-es bundle-lang-gnome-fr bundle-lang-gnome-hu bundle-lang-gnome-it bundle-lang-gnome-ja bundle-lang-gnome-pl bundle-lang-gnome-pt bundle-lang-gnome-ru bundle-lang-gnome-zh - Update package list. ==== bundle-lang-kde ==== Subpackages: bundle-lang-kde-cs bundle-lang-kde-da bundle-lang-kde-de bundle-lang-kde-el bundle-lang-kde-en bundle-lang-kde-es bundle-lang-kde-fr bundle-lang-kde-hu bundle-lang-kde-it bundle-lang-kde-ja bundle-lang-kde-pl bundle-lang-kde-pt bundle-lang-kde-ru bundle-lang-kde-zh - Update package list. ==== curl ==== Version update (7.49.1 -> 7.50.1) Subpackages: libcurl-devel libcurl4 - update to 7.50.1 Bugfixes: * TLS: switch off SSL session id when client cert is used * TLS: only reuse connections with the same client cert * curl_multi_cleanup: clear connection pointer for easy handles * include the CURLINFO_HTTP_VERSION man page into the release tarball * include the http2-server.pl script in the release tarball * test558: fix test by stripping file paths from FD lines * spnego: Corrected miss-placed * in Curl_auth_spnego_cleanup() declaration * tests: Fix for http/2 feature * cmake: Fix for schannel support * curl.h: make public types void * again * win32: fix a potential memory leak in Curl_load_library * travis: fix OSX build by re-installing libtool * mbedtls: Fix debug function name - removed 0001-tests-distribute-the-http2-server.pl-script-too.patch - update to 7.50.0 Changes: * http: add CURLINFO_HTTP_VERSION and %{http_version} Bugfixes: * openssl: fix build with OPENSSL_NO_COMP * cmake: Added missing mbedTLS support * URL parser: allow URLs to use one, two or three slashes * curl: fix -q [regression] * openssl: Use correct buffer sizes for error messages * curl: fix SIGSEGV while parsing URL with too many globs * vtls: fix ssl session cache race condition * http: Fix HTTP/2 connection reuse [regression] * checksrc: Add LoadLibrary to the banned functions list * configure: occasional ignorance of --enable-symbol-hiding with GCC * http2: test17xx are the first real HTTP/2 tests * resolve: add support for IPv6 DNS64/NAT64 Networks on OS X + iOS * curl_multi_socket_action.3: rewording * CURLOPT_POSTFIELDS.3: Clarify what happens when set empty * cmake: Fix build with winldap * openssl: fix cert check with non-DNS name fields present * curl.1: mention the units for the progress meter * openssl: use more 'const' to fix build warnings with 1.1.0 branch * cmake: now using BUILD_TESTING=ON/OFF * vtls: Only call add/getsession if session id is enabled * headers: forward declare CURL, CURLM and CURLSH as structs * configure: improve detection of CA bundle path on FreeBSD * SFTP: set a generic error when no SFTP one exists * curl_global_init.3: expand on the SSL and WIN32 bits purpose * conn: don't free easy handle data in handler->disconnect * cookie.c: Fix misleading indentation * library: Fix memory leaks found during static analysis * CURLMOPT_SOCKETFUNCTION.3: fix typo * curl_global_init: moved the "IPv6 works" check here * connect: disable TFO on Linux when using SSL * vauth: Fixed memory leak due to function returning without free - refresh libcurl-ocloexec.patch - disable tests 1139 and 1140 which fail due to missing manpage * add curl-disable_failing_tests.patch - ship http2_server.pl for testing * add 0001-tests-distribute-the-http2-server.pl-script-too.patch ==== dcraw ==== Version update (9.26.0 -> 9.27.0) Subpackages: dcraw-lang - Update to version 9.27.0: dcraw - revision 1.477 * Added "-o 6" for ACES colorspace. * Copied color matrices from DNG Converter 9.5.1. * Support the Canon EOS 80D & IXUS 160, Fuji X-E2 & X-E2S & X-Pro2. ==== evolution ==== Version update (3.20.4 -> 3.20.5) Subpackages: evolution-plugin-bogofilter evolution-plugin-pst-import evolution-plugin-spamassassin - Update to version 3.20.5: + EComposerPrivate: Changing a top signature to another one will place it on different position. + EComposerPrivate: Unneeded spacer left when setting a top signature from an existing one to None. + EHTMLEditorView: Redoing unquoting does not work. + Correct order of "assign value" and "call function" when saving to drafts. + Bugs fixed: bgo#768449, bgo#767283, bgo#769338, bgo#769354, bgo#769062, bgo#768683, bgo#769072, bgo#769523, bgo#769288. - Drop evolution-bgo769062-mouseover-crash.patch and evolution-bgo768683-cannot-mark-as-spam.patch: Fixed upstream. ==== evolution-data-server ==== Version update (3.20.4 -> 3.20.5) Subpackages: evolution-data-server-devel libcamel-1_2-57 libebackend-1_2-10 libebook-1_2-16 libebook-contacts-1_2-2 libecal-1_2-19 libedata-book-1_2-25 libedata-cal-1_2-28 libedataserver-1_2-21 libedataserverui-1_2-1 typelib-1_0-EBook-1_2 typelib-1_0-EBookContacts-1_2 typelib-1_0-EDataServer-1_2 - Update to version 3.20.5: + Incorrect times provided in e_cal_recur_generate_instances() (bgo#766346). ==== evolution-ews ==== Version update (3.20.4 -> 3.20.5) Subpackages: evolution-ews-lang libeews-1_2-0 libewsutils0 - Update to version 3.20.5: + Customized timezones not recognized (bgo#769044). ==== fcitx ==== Subpackages: fcitx-branding-openSUSE fcitx-gtk2 fcitx-gtk3 fcitx-pinyin fcitx-qt4 fcitx-table libfcitx-4_2_9 - fix Leap 42.2 build * fcitx switched to DBus mechanism to select systray icon which made it impossible to customize systray icon in fcitx's themes. When the KDE default keyboard icon was used, it was ugly-looking and invisible on small screens. So we appended icons to openSUSE default Plasma themes * in Leap 42.2 and Tumbleweed, our KDE team decided not to provide any customization of the themes from kdebase4-openSUSE package, so the customizations of systray icons are useless in those systems. ==== gfxboot ==== Version update (4.5.13 -> 4.5.14) - fix boot-label redrawing after language change (bsc#988392) - 4.5.14 ==== gnome-tweak-tool ==== - Drop gnome-tweak-tool-bnc898328-remove-lid-action-entries.patch (bsc#898328). Original problem fixed upstream and lid action is back. - Update to GNOME 3.20.2 FATE#318572 - Dropped bnc951346-add-sle-classic-schema-overrides-check.patch Not needed any more with 3.20-based SLE Classic. - Update to GNOME 3.20 Fate#318572 - Rebase gnome-tweak-tool-bnc898328-remove-lid-action-entries.patch ==== grsync ==== - Add grsync-appdata.patch to add, translate and install appdata file; the presence of the appdata file ensures that the application appears on appstores like GNOME Software and KDE Discover. ==== hdparm ==== - remove 56-idedma.rules and idedma.sh as none of these scripts have any function whatsoever. They rely on the obsolete IDE drivers [bsc#991898] - remove /etc/sysconfig/ide file [bsc#922659] ==== installation-images-openSUSE ==== Version update (14.264 -> 14.266) - add zypp config to initrd to ensure it's writable (bsc#967828) - fix symlink verification function - 14.266 - Make pam-modules optional - 14.265 ==== kactivitymanagerd ==== Version update (5.7.2 -> 5.7.3) - Update to 5.7.3 * New bugfix release * For more details please see: https://www.kde.org/announcements/plasma-5.7.3.php ==== kcm_sddm ==== Version update (5.7.2 -> 5.7.3) - Update to 5.7.3 * New bugfix release * For more details please see: https://www.kde.org/announcements/plasma-5.7.3.php ==== kde-cli-tools5 ==== Version update (5.7.2 -> 5.7.3) - Update to 5.7.3 * New bugfix release * For more details please see: https://www.kde.org/announcements/plasma-5.7.3.php ==== kde-gtk-config5 ==== Version update (5.7.2 -> 5.7.3) - Update to 5.7.3 * New bugfix release * For more details please see: https://www.kde.org/announcements/plasma-5.7.3.php ==== kde-user-manager ==== Version update (5.7.2 -> 5.7.3) - Update to 5.7.3 * New bugfix release * For more details please see: https://www.kde.org/announcements/plasma-5.7.3.php ==== kexec-tools ==== Version update (2.0.12 -> 2.0.13) - Update to version 2.0.13 Changelog: http://git.kernel.org/cgit/utils/kernel/kexec/kexec-tools.git/log/?id=refs/… - Refresh kexec-tools-enable-aarch64.patch ==== khotkeys5 ==== Version update (5.7.2 -> 5.7.3) Subpackages: khotkeys5-devel - Update to 5.7.3 * New bugfix release * For more details please see: https://www.kde.org/announcements/plasma-5.7.3.php ==== kinfocenter5 ==== Version update (5.7.2 -> 5.7.3) - Update to 5.7.3 * New bugfix release * For more details please see: https://www.kde.org/announcements/plasma-5.7.3.php ==== kmenuedit5 ==== Version update (5.7.2 -> 5.7.3) - Update to 5.7.3 * New bugfix release * For more details please see: https://www.kde.org/announcements/plasma-5.7.3.php ==== kscreen5 ==== Version update (5.7.2 -> 5.7.3) - Update to 5.7.3 * New bugfix release * For more details please see: https://www.kde.org/announcements/plasma-5.7.3.php ==== kscreenlocker ==== Version update (5.7.2 -> 5.7.3) Subpackages: libKScreenLocker5 - Update to 5.7.3 * New bugfix release * For more details please see: https://www.kde.org/announcements/plasma-5.7.3.php ==== ksshaskpass5 ==== Version update (5.7.2 -> 5.7.3) - Update to 5.7.3 * New bugfix release * For more details please see: https://www.kde.org/announcements/plasma-5.7.3.php ==== ksysguard5 ==== Version update (5.7.2 -> 5.7.3) - Update to 5.7.3 * New bugfix release * For more details please see: https://www.kde.org/announcements/plasma-5.7.3.php ==== kwin5 ==== Version update (5.7.2 -> 5.7.3) Subpackages: kwin5-devel - Update to 5.7.3 * New bugfix release * For more details please see: https://www.kde.org/announcements/plasma-5.7.3.php ==== libe-book ==== - Disable sle11 support code ==== libkdecoration2 ==== Version update (5.7.2 -> 5.7.3) Subpackages: libkdecoration2-devel libkdecorations2-5 libkdecorations2private5 - Update to 5.7.3 * New bugfix release * For more details please see: https://www.kde.org/announcements/plasma-5.7.3.php ==== libkscreen2 ==== Version update (5.7.2 -> 5.7.3) Subpackages: libKF5Screen7 libkscreen2-devel libkscreen2-plugin - Update to 5.7.3 * New bugfix release * For more details please see: https://www.kde.org/announcements/plasma-5.7.3.php ==== libksysguard5 ==== Version update (5.7.2 -> 5.7.3) Subpackages: libksysguard5-devel libksysguard5-helper - Update to 5.7.3 * New bugfix release * For more details please see: https://www.kde.org/announcements/plasma-5.7.3.php ==== libmspub ==== - Disable sle11 support code ==== libpagemaker ==== - Disable sle11 support code ==== milou5 ==== Version update (5.7.2 -> 5.7.3) - Update to 5.7.3 * New bugfix release * For more details please see: https://www.kde.org/announcements/plasma-5.7.3.php ==== mozilla-nss ==== Version update (3.23 -> 3.24) Subpackages: libfreebl3 libsoftokn3 mozilla-nss-certs mozilla-nss-devel mozilla-nss-tools - also sign libfreeblpriv3.so to allow FIPS mode again (boo#992236) - update to NSS 3.24 New functionality: * NSS softoken has been updated with the latest National Institute of Standards and Technology (NIST) guidance (as of 2015): - Software integrity checks and POST functions are executed on shared library load. These checks have been disabled by default, as they can cause a performance regression. To enable these checks, you must define symbol NSS_FORCE_FIPS when building NSS. - Counter mode and Galois/Counter Mode (GCM) have checks to prevent counter overflow. - Additional CSPs are zeroed in the code. - NSS softoken uses new guidance for how many Rabin-Miller tests are needed to verify a prime based on prime size. * NSS softoken has also been updated to allow NSS to run in FIPS Level 1 (no password). This mode is triggered by setting the database password to the empty string. In FIPS mode, you may move from Level 1 to Level 2 (by setting an appropriate password), but not the reverse. * A SSL_ConfigServerCert function has been added for configuring SSL/TLS server sockets with a certificate and private key. Use this new function in place of SSL_ConfigSecureServer, SSL_ConfigSecureServerWithCertChain, SSL_SetStapledOCSPResponses, and SSL_SetSignedCertTimestamps. SSL_ConfigServerCert automatically determines the certificate type from the certificate and private key. The caller is no longer required to use SSLKEAType explicitly to select a "slot" into which the certificate is configured (which incorrectly identifies a key agreement type rather than a certificate). Separate functions for configuring Online Certificate Status Protocol (OCSP) responses or Signed Certificate Timestamps are not needed, since these can be added to the optional SSLExtraServerCertData struct provided to SSL_ConfigServerCert. Also, partial support for RSA Probabilistic Signature Scheme (RSA-PSS) certificates has been added. Although these certificates can be configured, they will not be used by NSS in this version. New functions * SSL_ConfigServerCert - Configures an SSL/TLS socket with a certificate, private key, and other information. * PORT_InitCheapArena - Initializes an arena that was created on the stack. (See PORTCheapArenaPool.= * PORT_DestroyCheapArena - Destroys an arena that was created on the stack. (See PORTCheapArenaPool.) New types * SSLExtraServerCertData - Optionally passed as an argument to SSL_ConfigServerCert. This struct contains supplementary information about a certificate, such as the intended type of the certificate, stapled OCSP responses, or Signed Certificate Timestamps (used for certificate transparency). * PORTCheapArenaPool - A stack-allocated arena pool, to be used for temporary arena allocations. New macros * CKM_TLS12_MAC * SEC_OID_TLS_ECDHE_PSK - This OID governs the use of the TLS_ECDHE_PSK_WITH_AES_128_GCM_SHA256 cipher suite, which is used only for session resumption in TLS 1.3. Notable changes: * Deprecate the following functions. (Applications should instead use the new SSL_ConfigServerCert function.): - SSL_SetStapledOCSPResponses - SSL_SetSignedCertTimestamps - SSL_ConfigSecureServer - SSL_ConfigSecureServerWithCertChain * Deprecate the NSS_FindCertKEAType function, as it reports a misleading value for certificates that might be used for signing rather than key exchange. * Update SSLAuthType to define a larger number of authentication key types. * Deprecate the member attribute authAlgorithm of type SSLCipherSuiteInfo. Instead, applications should use the newly added attribute authType. * Rename ssl_auth_rsa to ssl_auth_rsa_decrypt. * Add a shared library (libfreeblpriv3) on Linux platforms that define FREEBL_LOWHASH. * Remove most code related to SSL v2, including the ability to actively send a SSLv2-compatible client hello. However, the server-side implementation of the SSL/TLS protocol still supports processing of received v2-compatible client hello messages. * Disable (by default) NSS support in optimized builds for logging SSL/TLS key material to a logfile if the SSLKEYLOGFILE environment variable is set. To enable the functionality in optimized builds, you must define the symbol NSS_ALLOW_SSLKEYLOGFILE when building NSS. * Update NSS to protect it against the Cachebleed attack. * Disable support for DTLS compression. * Improve support for TLS 1.3. This includes support for DTLS 1.3. Note that TLS 1.3 support is experimental and not suitable for production use. - removed obsolete nss-bmo1236011.patch ==== nghttp2 ==== Version update (1.12.0 -> 1.13.0) - Update to version 1.13.0: * lib: Cancel non-DATA frame transmission from nghttp2_before_frame_send_callback * doc: Fix warning with Sphinx 1.4 * build: Work with Android NDK r12b * nghttpx: Use consistent hashing for client IP based session affinity * nghttpx: Fix FTBFS on armel by explicitly including the header * nghttpx: Cast to double to fix build with gcc 4.8 on Solaris 11 * nghttpx: Fix build error with libressl * examples: Fix compile error with OpenSSL v1.1.0-beta2 ==== oxygen5 ==== Version update (5.7.2 -> 5.7.3) Subpackages: oxygen5-cursors oxygen5-decoration oxygen5-devel oxygen5-lang oxygen5-sounds oxygen5-style - Update to 5.7.3 * New bugfix release * For more details please see: https://www.kde.org/announcements/plasma-5.7.3.php ==== plasma-nm5 ==== Version update (5.7.2 -> 5.7.3) Subpackages: plasma-nm5-openconnect plasma-nm5-openvpn plasma-nm5-pptp plasma-nm5-vpnc - Update to 5.7.3 * New bugfix release * For more details please see: https://www.kde.org/announcements/plasma-5.7.3.php ==== plasma5-addons ==== Version update (5.7.2 -> 5.7.3) - Update to 5.7.3 * New bugfix release * For more details please see: https://www.kde.org/announcements/plasma-5.7.3.php ==== plasma5-desktop ==== Version update (5.7.2 -> 5.7.3) - Update to 5.7.3 * New bugfix release * For more details please see: https://www.kde.org/announcements/plasma-5.7.3.php - Drop upstreamed patches: 0001-don-t-create-activities-by-ourselves.patch 0002-use-desktopsForActivty-currentActivity.patch 0003-correct-typo.patch loop-trough-screens-only-once.patch ==== plasma5-integration ==== Version update (5.7.2 -> 5.7.3) - Update to 5.7.3 * New bugfix release * For more details please see: https://www.kde.org/announcements/plasma-5.7.3.php ==== plasma5-openSUSE ==== Subpackages: plasma5-desktop-branding-openSUSE plasma5-workspace-branding-openSUSE - Bump Plasma (Build)Requires to 5.7.3 ==== plasma5-pa ==== Version update (5.7.2 -> 5.7.3) - Update to 5.7.3 * New bugfix release * For more details please see: https://www.kde.org/announcements/plasma-5.7.3.php ==== plasma5-workspace ==== Version update (5.7.2 -> 5.7.3) Subpackages: drkonqi5 plasma5-workspace-devel plasma5-workspace-libs - Remove 0001-Workaround-kde-362531.patch as fixed in kwindowsystem - Update to 5.7.3 * New bugfix release * For more details please see: https://www.kde.org/announcements/plasma-5.7.3.php - Drop upstreamed patches: 0002-don-t-try-to-load-layout-before-kamd-starts.patch 0006-Treat-IsDemandingAttention-as-IsOnAllVirtualDesktops.patch 0007-apparently-containment-can-be-null.patch 0010-Properly-registering-existing-activities-before-load.patch 0001-check-harder-to-include-only-desktops-in-desktops.patch ==== polkit-kde-agent-5 ==== Version update (5.7.2 -> 5.7.3) - Update to 5.7.3 * New bugfix release * For more details please see: https://www.kde.org/announcements/plasma-5.7.3.php ==== powerdevil5 ==== Version update (5.7.2 -> 5.7.3) - Update to 5.7.3 * New bugfix release * For more details please see: https://www.kde.org/announcements/plasma-5.7.3.php ==== python-gtksourceview ==== - Unconditionally BuildRequire pkg-config. ==== python-ldap ==== Version update (2.4.25 -> 2.4.27) - Update to upstream release 2.4.27 - Update to upstream release 2.4.26 - updated pypi source URL ==== qemu ==== Subpackages: qemu-arm qemu-block-curl qemu-block-dmg qemu-block-gluster qemu-block-iscsi qemu-block-ssh qemu-extra qemu-ipxe qemu-ksm qemu-kvm qemu-lang qemu-ppc qemu-s390 qemu-seabios qemu-sgabios qemu-tools qemu-vgabios qemu-x86 - Temporarily disable ceph (rbd) functionality in OBS due to staging issues. - use upstream solution for building xen-usb.c correctly - Patch queue updated from git://github.com/openSUSE/qemu.git opensuse-2.6 * Patches dropped: 0058-usb-Fix-conditions-that-xen-usb.c-i.patch * Patches added: 0058-xen-move-xen_sysdev-to-xen_backend..patch - Incorporate patch carried in Xen's qemu to get same support as Xen switches to use the qemu package (bsc#953339, bsc#953362, bsc#953518, bsc#984981) 0064-xen-SUSE-xenlinux-unplug-for-emulat.patch - Fix more potential OOB accesses in 53C9X emulation (CVE-2016-5238 bsc#982959) 0065-scsi-esp-check-buffer-length-before.patch 0066-scsi-esp-respect-FIFO-invariant-aft.patch - Avoid "Invalid ROM" error message when it is not appropriate (bsc#982927) 0067-pci-assign-Move-Invalid-ROM-error-m.patch - Fix failure in Xen HVM PCI passthrough (bsc#981925, bsc#989250) 0068-Xen-PCI-passthrough-fix-passthrough.patch - Fix OOB access in 53C9X emulation (CVE-2016-6351 bsc#990835) 0069-scsi-esp-make-cmdbuf-big-enough-for.patch 0070-scsi-esp-fix-migration.patch - Avoid potential for guest initiated OOM condition in qemu through virtio interface (CVE-2016-5403 bsc#991080) 0071-virtio-error-out-if-guest-exceeds-v.patch - Fix potential crashes in qemu from pvusb bugs (bsc#986156) 0072-xen-when-removing-a-backend-don-t-r.patch 0073-xen-drain-submit-queue-in-xen-usb-b.patch - Avoid unneeded flushes in qcow2 which impact performance (bsc#991296) 0074-qcow2-avoid-extra-flushes-in-qcow2.patch - Finally get qemu-bridge-helper the permissions it needs for non- root usage. The kvm group is leveraged to control access. (boo#988279) 0075-qemu-bridge-helper-reduce-security-.patch - Fix pvusb not working for HVM guests (bsc#991785) 0076-xen-use-a-common-function-for-pv-an.patch - Patch queue updated from git://github.com/openSUSE/qemu.git opensuse-2.6 - Minor spec file formatting fixes - Fix ARM PCIe DMA coherency bug (bsc#991034) - Patch queue updated from git://github.com/openSUSE/qemu.git opensuse-2.6 * Patches added: 0063-hw-arm-virt-mark-the-PCIe-host-cont.patch - Clean up the udev ifdeffery to cover systemd as well (boo#860275) - Trigger udev rules also under systemd (boo#989655) - Suppress s390x sysctl in chroot - Ignore s390x sysctl failures (agraf) - Build SLOF for SLE12 now that we have gcc fix (bsc#949000) - Add script for loading kvm module on s390x - Enable seccomp and iscsi support in more configurations - Enable more support for virtio-gpu - Fix /dev/kvm permissions problem with package install and no reboot (bnc#867867) - Remove libtool dependency - Disable more aggressive stack protector for performance reasons - Enable vte to be used again in more configurations (bsc#988855) - Patch queue updated from git://github.com/openSUSE/qemu.git opensuse-2.6 * Patches added: 0061-configure-add-echo_version-helper.patch 0062-configure-support-vte-2.91.patch - Remove deprecated patch "work-around-SA_RESTART-race" (boo#982208) - Patch queue updated from git://github.com/openSUSE/qemu.git opensuse-2.6 * Patches dropped: 0002-XXX-work-around-SA_RESTART-race-wit.patch 0003-qemu-0.9.0.cvs-binfmt.patch 0004-qemu-cvs-alsa_bitfield.patch 0005-qemu-cvs-alsa_ioctl.patch 0006-qemu-cvs-alsa_mmap.patch 0007-qemu-cvs-gettimeofday.patch 0008-qemu-cvs-ioctl_debug.patch 0009-qemu-cvs-ioctl_nodirection.patch 0010-block-vmdk-Support-creation-of-SCSI.patch 0011-linux-user-add-binfmt-wrapper-for-a.patch 0012-PPC-KVM-Disable-mmu-notifier-check.patch 0013-linux-user-fix-segfault-deadlock.patch 0014-linux-user-binfmt-support-host-bina.patch 0015-linux-user-Ignore-broken-loop-ioctl.patch 0016-linux-user-lock-tcg.patch 0017-linux-user-Run-multi-threaded-code-.patch 0018-linux-user-lock-tb-flushing-too.patch 0019-linux-user-Fake-proc-cpuinfo.patch 0020-linux-user-implement-FS_IOC_GETFLAG.patch 0021-linux-user-implement-FS_IOC_SETFLAG.patch 0022-linux-user-XXX-disable-fiemap.patch 0023-slirp-nooutgoing.patch 0024-vnc-password-file-and-incoming-conn.patch 0025-linux-user-add-more-blk-ioctls.patch 0026-linux-user-use-target_ulong.patch 0027-block-Add-support-for-DictZip-enabl.patch 0028-block-Add-tar-container-format.patch 0029-Legacy-Patch-kvm-qemu-preXX-dictzip.patch 0030-console-add-question-mark-escape-op.patch 0031-Make-char-muxer-more-robust-wrt-sma.patch 0032-linux-user-lseek-explicitly-cast-no.patch 0033-virtfs-proxy-helper-Provide-__u64-f.patch 0034-configure-Enable-PIE-for-ppc-and-pp.patch 0035-qtest-Increase-socket-timeout.patch 0036-AIO-Reduce-number-of-threads-for-32.patch 0037-configure-Enable-libseccomp-for-ppc.patch 0038-dictzip-Fix-on-big-endian-systems.patch 0039-block-split-large-discard-requests-.patch 0040-xen_disk-Add-suse-specific-flush-di.patch 0041-build-link-with-libatomic-on-powerp.patch 0042-net-mipsnet-check-packet-length-aga.patch 0043-i386-kvmvapic-initialise-imm32-vari.patch 0044-esp-check-command-buffer-length-bef.patch 0045-esp-check-dma-length-before-reading.patch 0046-scsi-pvscsi-check-command-descripto.patch 0047-scsi-mptsas-infinite-loop-while-fet.patch 0048-vga-add-sr_vbe-register-set.patch 0049-scsi-megasas-use-appropriate-proper.patch 0050-scsi-megasas-check-read_queue_head-.patch 0051-scsi-megasas-null-terminate-bios-ve.patch 0052-vmsvga-move-fifo-sanity-checks-to-v.patch 0053-vmsvga-don-t-process-more-than-1024.patch 0054-block-iscsi-avoid-potential-overflo.patch 0055-scsi-esp-check-TI-buffer-index-befo.patch 0056-xen-introduce-dummy-system-device.patch 0057-xen-write-information-about-support.patch 0058-xen-add-pvUSB-backend.patch 0059-usb-Fix-conditions-that-xen-usb.c-i.patch 0060-vnc-add-configurable-keyboard-delay.patch 0061-scsi-megasas-initialise-local-confi.patch * Patches added: 0002-qemu-0.9.0.cvs-binfmt.patch 0003-qemu-cvs-alsa_bitfield.patch 0004-qemu-cvs-alsa_ioctl.patch 0005-qemu-cvs-alsa_mmap.patch 0006-qemu-cvs-gettimeofday.patch 0007-qemu-cvs-ioctl_debug.patch 0008-qemu-cvs-ioctl_nodirection.patch 0009-block-vmdk-Support-creation-of-SCSI.patch 0010-linux-user-add-binfmt-wrapper-for-a.patch 0011-PPC-KVM-Disable-mmu-notifier-check.patch 0012-linux-user-fix-segfault-deadlock.patch 0013-linux-user-binfmt-support-host-bina.patch 0014-linux-user-Ignore-broken-loop-ioctl.patch 0015-linux-user-lock-tcg.patch 0016-linux-user-Run-multi-threaded-code-.patch 0017-linux-user-lock-tb-flushing-too.patch 0018-linux-user-Fake-proc-cpuinfo.patch 0019-linux-user-implement-FS_IOC_GETFLAG.patch 0020-linux-user-implement-FS_IOC_SETFLAG.patch 0021-linux-user-XXX-disable-fiemap.patch 0022-slirp-nooutgoing.patch 0023-vnc-password-file-and-incoming-conn.patch 0024-linux-user-add-more-blk-ioctls.patch 0025-linux-user-use-target_ulong.patch 0026-block-Add-support-for-DictZip-enabl.patch 0027-block-Add-tar-container-format.patch 0028-Legacy-Patch-kvm-qemu-preXX-dictzip.patch 0029-console-add-question-mark-escape-op.patch 0030-Make-char-muxer-more-robust-wrt-sma.patch 0031-linux-user-lseek-explicitly-cast-no.patch 0032-virtfs-proxy-helper-Provide-__u64-f.patch 0033-configure-Enable-PIE-for-ppc-and-pp.patch 0034-qtest-Increase-socket-timeout.patch 0035-AIO-Reduce-number-of-threads-for-32.patch 0036-configure-Enable-libseccomp-for-ppc.patch 0037-dictzip-Fix-on-big-endian-systems.patch 0038-block-split-large-discard-requests-.patch 0039-xen_disk-Add-suse-specific-flush-di.patch 0040-build-link-with-libatomic-on-powerp.patch 0041-net-mipsnet-check-packet-length-aga.patch 0042-i386-kvmvapic-initialise-imm32-vari.patch 0043-esp-check-command-buffer-length-bef.patch 0044-esp-check-dma-length-before-reading.patch 0045-scsi-pvscsi-check-command-descripto.patch 0046-scsi-mptsas-infinite-loop-while-fet.patch 0047-vga-add-sr_vbe-register-set.patch 0048-scsi-megasas-use-appropriate-proper.patch 0049-scsi-megasas-check-read_queue_head-.patch 0050-scsi-megasas-null-terminate-bios-ve.patch 0051-vmsvga-move-fifo-sanity-checks-to-v.patch 0052-vmsvga-don-t-process-more-than-1024.patch 0053-block-iscsi-avoid-potential-overflo.patch 0054-scsi-esp-check-TI-buffer-index-befo.patch 0055-xen-introduce-dummy-system-device.patch 0056-xen-write-information-about-support.patch 0057-xen-add-pvUSB-backend.patch 0058-usb-Fix-conditions-that-xen-usb.c-i.patch 0059-vnc-add-configurable-keyboard-delay.patch 0060-scsi-megasas-initialise-local-confi.patch - Enable ceph (rbd) support for aarch64 - Enable ceph (rbd) support ==== qemu-linux-user ==== - Patch queue updated from git://github.com/openSUSE/qemu.git opensuse-2.6 * Patches dropped: 0058-usb-Fix-conditions-that-xen-usb.c-i.patch * Patches added: 0058-xen-move-xen_sysdev-to-xen_backend..patch - Patch queue updated from git://github.com/openSUSE/qemu.git opensuse-2.6 * Patches added: 0064-xen-SUSE-xenlinux-unplug-for-emulat.patch 0065-scsi-esp-check-buffer-length-before.patch 0066-scsi-esp-respect-FIFO-invariant-aft.patch 0067-pci-assign-Move-Invalid-ROM-error-m.patch 0068-Xen-PCI-passthrough-fix-passthrough.patch 0069-scsi-esp-make-cmdbuf-big-enough-for.patch 0070-scsi-esp-fix-migration.patch 0071-virtio-error-out-if-guest-exceeds-v.patch 0072-xen-when-removing-a-backend-don-t-r.patch 0073-xen-drain-submit-queue-in-xen-usb-b.patch 0074-qcow2-avoid-extra-flushes-in-qcow2.patch 0075-qemu-bridge-helper-reduce-security-.patch 0076-xen-use-a-common-function-for-pv-an.patch - Patch queue updated from git://github.com/openSUSE/qemu.git opensuse-2.6 * Patches added: 0063-hw-arm-virt-mark-the-PCIe-host-cont.patch - Patch queue updated from git://github.com/openSUSE/qemu.git opensuse-2.6 * Patches added: 0061-configure-add-echo_version-helper.patch 0062-configure-support-vte-2.91.patch - Remove deprecated patch "work-around-SA_RESTART-race" (boo#982208) - Patch queue updated from git://github.com/openSUSE/qemu.git opensuse-2.6 * Patches dropped: 0002-XXX-work-around-SA_RESTART-race-wit.patch 0003-qemu-0.9.0.cvs-binfmt.patch 0004-qemu-cvs-alsa_bitfield.patch 0005-qemu-cvs-alsa_ioctl.patch 0006-qemu-cvs-alsa_mmap.patch 0007-qemu-cvs-gettimeofday.patch 0008-qemu-cvs-ioctl_debug.patch 0009-qemu-cvs-ioctl_nodirection.patch 0010-block-vmdk-Support-creation-of-SCSI.patch 0011-linux-user-add-binfmt-wrapper-for-a.patch 0012-PPC-KVM-Disable-mmu-notifier-check.patch 0013-linux-user-fix-segfault-deadlock.patch 0014-linux-user-binfmt-support-host-bina.patch 0015-linux-user-Ignore-broken-loop-ioctl.patch 0016-linux-user-lock-tcg.patch 0017-linux-user-Run-multi-threaded-code-.patch 0018-linux-user-lock-tb-flushing-too.patch 0019-linux-user-Fake-proc-cpuinfo.patch 0020-linux-user-implement-FS_IOC_GETFLAG.patch 0021-linux-user-implement-FS_IOC_SETFLAG.patch 0022-linux-user-XXX-disable-fiemap.patch 0023-slirp-nooutgoing.patch 0024-vnc-password-file-and-incoming-conn.patch 0025-linux-user-add-more-blk-ioctls.patch 0026-linux-user-use-target_ulong.patch 0027-block-Add-support-for-DictZip-enabl.patch 0028-block-Add-tar-container-format.patch 0029-Legacy-Patch-kvm-qemu-preXX-dictzip.patch 0030-console-add-question-mark-escape-op.patch 0031-Make-char-muxer-more-robust-wrt-sma.patch 0032-linux-user-lseek-explicitly-cast-no.patch 0033-virtfs-proxy-helper-Provide-__u64-f.patch 0034-configure-Enable-PIE-for-ppc-and-pp.patch 0035-qtest-Increase-socket-timeout.patch 0036-AIO-Reduce-number-of-threads-for-32.patch 0037-configure-Enable-libseccomp-for-ppc.patch 0038-dictzip-Fix-on-big-endian-systems.patch 0039-block-split-large-discard-requests-.patch 0040-xen_disk-Add-suse-specific-flush-di.patch 0041-build-link-with-libatomic-on-powerp.patch 0042-net-mipsnet-check-packet-length-aga.patch 0043-i386-kvmvapic-initialise-imm32-vari.patch 0044-esp-check-command-buffer-length-bef.patch 0045-esp-check-dma-length-before-reading.patch 0046-scsi-pvscsi-check-command-descripto.patch 0047-scsi-mptsas-infinite-loop-while-fet.patch 0048-vga-add-sr_vbe-register-set.patch 0049-scsi-megasas-use-appropriate-proper.patch 0050-scsi-megasas-check-read_queue_head-.patch 0051-scsi-megasas-null-terminate-bios-ve.patch 0052-vmsvga-move-fifo-sanity-checks-to-v.patch 0053-vmsvga-don-t-process-more-than-1024.patch 0054-block-iscsi-avoid-potential-overflo.patch 0055-scsi-esp-check-TI-buffer-index-befo.patch 0056-xen-introduce-dummy-system-device.patch 0057-xen-write-information-about-support.patch 0058-xen-add-pvUSB-backend.patch 0059-usb-Fix-conditions-that-xen-usb.c-i.patch 0060-vnc-add-configurable-keyboard-delay.patch 0061-scsi-megasas-initialise-local-confi.patch * Patches added: 0002-qemu-0.9.0.cvs-binfmt.patch 0003-qemu-cvs-alsa_bitfield.patch 0004-qemu-cvs-alsa_ioctl.patch 0005-qemu-cvs-alsa_mmap.patch 0006-qemu-cvs-gettimeofday.patch 0007-qemu-cvs-ioctl_debug.patch 0008-qemu-cvs-ioctl_nodirection.patch 0009-block-vmdk-Support-creation-of-SCSI.patch 0010-linux-user-add-binfmt-wrapper-for-a.patch 0011-PPC-KVM-Disable-mmu-notifier-check.patch 0012-linux-user-fix-segfault-deadlock.patch 0013-linux-user-binfmt-support-host-bina.patch 0014-linux-user-Ignore-broken-loop-ioctl.patch 0015-linux-user-lock-tcg.patch 0016-linux-user-Run-multi-threaded-code-.patch 0017-linux-user-lock-tb-flushing-too.patch 0018-linux-user-Fake-proc-cpuinfo.patch 0019-linux-user-implement-FS_IOC_GETFLAG.patch 0020-linux-user-implement-FS_IOC_SETFLAG.patch 0021-linux-user-XXX-disable-fiemap.patch 0022-slirp-nooutgoing.patch 0023-vnc-password-file-and-incoming-conn.patch 0024-linux-user-add-more-blk-ioctls.patch 0025-linux-user-use-target_ulong.patch 0026-block-Add-support-for-DictZip-enabl.patch 0027-block-Add-tar-container-format.patch 0028-Legacy-Patch-kvm-qemu-preXX-dictzip.patch 0029-console-add-question-mark-escape-op.patch 0030-Make-char-muxer-more-robust-wrt-sma.patch 0031-linux-user-lseek-explicitly-cast-no.patch 0032-virtfs-proxy-helper-Provide-__u64-f.patch 0033-configure-Enable-PIE-for-ppc-and-pp.patch 0034-qtest-Increase-socket-timeout.patch 0035-AIO-Reduce-number-of-threads-for-32.patch 0036-configure-Enable-libseccomp-for-ppc.patch 0037-dictzip-Fix-on-big-endian-systems.patch 0038-block-split-large-discard-requests-.patch 0039-xen_disk-Add-suse-specific-flush-di.patch 0040-build-link-with-libatomic-on-powerp.patch 0041-net-mipsnet-check-packet-length-aga.patch 0042-i386-kvmvapic-initialise-imm32-vari.patch 0043-esp-check-command-buffer-length-bef.patch 0044-esp-check-dma-length-before-reading.patch 0045-scsi-pvscsi-check-command-descripto.patch 0046-scsi-mptsas-infinite-loop-while-fet.patch 0047-vga-add-sr_vbe-register-set.patch 0048-scsi-megasas-use-appropriate-proper.patch 0049-scsi-megasas-check-read_queue_head-.patch 0050-scsi-megasas-null-terminate-bios-ve.patch 0051-vmsvga-move-fifo-sanity-checks-to-v.patch 0052-vmsvga-don-t-process-more-than-1024.patch 0053-block-iscsi-avoid-potential-overflo.patch 0054-scsi-esp-check-TI-buffer-index-befo.patch 0055-xen-introduce-dummy-system-device.patch 0056-xen-write-information-about-support.patch 0057-xen-add-pvUSB-backend.patch 0058-usb-Fix-conditions-that-xen-usb.c-i.patch 0059-vnc-add-configurable-keyboard-delay.patch 0060-scsi-megasas-initialise-local-confi.patch ==== rubygem-gem2rpm ==== - add 0001-Also-tag-APACHE-LICENSE-2.0-as-docfile.patch ==== skype4pidgin ==== Version update (1.1 -> 1.2.1) Subpackages: libpurple-plugin-skype libpurple-plugin-skypeweb pidgin-plugin-skype pidgin-plugin-skypeweb - Update to version 1.2.1: * Fix Outlook (email address) logins. * Faster logins and less "registration token expired" disconnects. * Fix the "Search for friends..." box (properly this time). * Allow setting 'mood' messages (properly this time). - Update to version 1.2: * Add support for libpurple 2.11+. * Fix the "Search for friends?" box. * Allow setting 'mood' messages. ==== systemsettings5 ==== Version update (5.7.2 -> 5.7.3) Subpackages: systemsettings5-devel - Update to 5.7.3 * New bugfix release * For more details please see: https://www.kde.org/announcements/plasma-5.7.3.php ==== tidy ==== Subpackages: libtidy5 - add static_buffer_overflow.diff: + fix overflow in a static buffer (CVE-2016-6583) - add Debian package files form fomer tidy-html5 packagee these don't really work, but mostly as WIP ==== ufraw ==== Subpackages: gimp-ufraw ufraw-lang - narrowing-conversion.patch: fix narrowing conversion errors ==== xfce4-terminal ==== Version update (0.6.3 -> 0.6.90) Subpackages: xfce4-terminal-lang - Update to 0.6.90. * Migrate to GTK+3/VTE3. * Fix closing wrong tabs with Ctrl+Shift+W. * Make close tab shortcut work for single tab. * Add Ctrl+Shift+PgUp/PgDn shortcuts to move tabs left/right. * Add support for unlimited scrollback. * Fix actions applied to wrong tab after closing another one. * Update intltool. * Add Ctrl+Shift+S hotkey to set title. * Expose MiscTabCloseMiddleClick option to Preferences. * Fix terminal window not moved to foreground when using --tab option. * Respect Display window borders setting in drop-down mode. * Apply opacity setting by chaging background color alpha value. * Prevent characters from being hidden by block cursor. * Fix in drop-down mode, "100% width" isn't really 100%. * Add ShortcutsNoHelpkey option to disable F1 (help) shortcut key and expose it to Preferences. * Add support for magnet links. * Expose MiscMouseAutohide option to Preferences. * Fix terminal crash when starting with --geometry. * Add ability to zoom in/out by pressing Ctrl +/-; add --font and - -zoom command line options. * Expand zoom level. * Add hidden option MiscMiddleClickOpensUri to control whether middle click opens URI: if FALSE, Ctrl + left click is used for that; default is FALSE. * Fix compilation for vte < 0.44. * Remove emulation setting and input methods menu as they are not supported by vte. * Do not allow creating multiple Set Title dialog windows. * Remove Help button and add icon to Close button in Set Title dialog. * Add an icon to the search dialog close button. * Rename UI setting from Transparency to Opacity. * Update terminal website address in the About dialog. * Fix crash on moving a tab from one window to another. * Add tooltip for the Find toolbar button. * Add setting to allow cursor blinking to Preferences. * Add setting to change cursor shape to Preferences. * Fix typo in the preferences dialog. * Add some new encodings taken from gnome-terminal. * Fix crash on setting encoding. * Fix detach tab functionality with GTK>=3.16. * Fix segfault when right/middle click on tab bar. * Translation updates: Arabic, Asturian, Bulgarian, Catalan, Chinese (China), Chinese (Taiwan), Croatian, Czech, Danish, Dutch, English (Australia), Esperanto, Finnish, French, German, Greek, Hebrew, Hungarian, Icelandic, Indonesian, Italian, Japanese, Kazakh, Korean, Lithuanian, Malay, Norwegian Bokm�l, Polish, Portuguese, Portuguese (Brazil), Romanian, Russian, Serbian, Slovak, Slovenian, Spanish, Swedish, Thai, Turkish, Ukrainian. - Change BuildRequires: pkgconfig(gtk+-3.0), pkgconfig(vte-2.91). - Remove BuildRequires: fdupes, update-desktop-files. - Don't install ChangeLog (it is useless). - Clean up the spec. ==== yast2-firstboot ==== Version update (3.1.14 -> 3.1.15) - Reimplemented "create user" and "root password" steps to reuse the new installation dialogs instead of the obsolete ones. - More sensible order for the mentioned steps in the default configuration file. - Removed from the default configuration file the obsolete step for configuring authentication. - bsc#992245, bsc#991863 - 3.1.15 -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 1

Re: [opensuse-factory] Kwright & Kate
by Dave Plater 07 Nov '16

07 Nov '16

On 05/11/2016 04:01, John L Bowling wrote: > On 11/03/2016 11:25 AM, Dave Plater wrote: >> >> >> On 03/11/2016 14:32, John L Bowling wrote: >>> Leap 42.1 with all upgrades installed. >>> >>> Currently Kwrite does not have any way of setting things, nor can it >>> access print.If Kate is not installed, you cannot do anything other >>> than edit save, and with Kate installed, you have to use it's >>> controls to modify Kwrite. Also, when you have a file open with >>> either one and they open it with the other, it closes the first. >>> >> What settings don't you have in kwrite? Both kate and kwrite use the >> kate backend but I can open the same file in two instances of kwrite >> if I wish to, I've done it by mistake before. >> Regards >> Dave P > > Yes, with both kwrite and kate installed, all of the setups are > available to kwrite. If kate has not yet been installed, settings for > kwrite are very limited. No font settings, no line numbers, etc. > especially no printing with printers properly installed and working > for Libre Office. Kate, if installed and then removed may leave the > setups as they were set. > > I will be build a new computer and install 42.2 on it, without kate > (if possible) and see what that does. There are several hidden files I > have to port over, and that may bring in the settings. > > Yes, with both kwrite and kate installed, all of the setups are > available to kwrite. If kate has not yet been installed, settings for > kwrite are very limited. No font settings, no line numbers, etc. > especially no printing with printers properly installed and working > for Libre Office. Kate, if installed and then removed may leave the > setups as they were set. > > I will be build a new computer and install 42.2 on it, without kate > (if possible) and see what that does. There are several hidden files I > have to port over, and that may bring in the settings. > > John We should take this discussion to bugzilla as it seems that kwrite is missing a dependency. Could you file a bug and add davejplater(a)gmail.com as cc. Thanks Dave P -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

3 3

[opensuse-factory] New Tumbleweed snapshot 20161105 released!
by Dominique Leuenberger 07 Nov '16

07 Nov '16

Please note that this mail was generated by a script. The described changes are computed based on the x86_64 DVD. The full online repo contains too many changes to be listed here. Please check the known defects of this snapshot before upgrading: https://openqa.opensuse.org/tests/overview?distri=opensuse&groupid=1&versio… When you reply to report some issues, make sure to change the subject. It is not helpful to keep the release announcement subject in a thread while discussing a specific problem. Packages changed: Mesa (12.0.3 -> 13.0.0) apache-commons-dbcp btrfsprogs (4.7.3 -> 4.8.2) kernel-source libX11 (1.6.3 -> 1.6.4) libXfixes (5.0.2 -> 5.0.3) libXi (1.7.6 -> 1.7.8) libXrender (0.9.9 -> 0.9.10) libXtst (1.2.2 -> 1.2.3) libXv (1.0.10 -> 1.0.11) libXvMC (1.0.9 -> 1.0.10) libqt5-qtwebengine myspell-dictionaries (20160511 -> 20161031) osc php5 quagga timezone (2016h -> 2016i) timezone-java (2016h -> 2016i) xf86-video-ati yakuake === Details === ==== Mesa ==== Version update (12.0.3 -> 13.0.0) Subpackages: Mesa-32bit Mesa-dri-devel Mesa-dri-nouveau Mesa-libEGL-devel Mesa-libEGL1 Mesa-libEGL1-32bit Mesa-libGL-devel Mesa-libGL1 Mesa-libGL1-32bit Mesa-libGLESv2-2 Mesa-libglapi0 Mesa-libglapi0-32bit Mesa-libva libOSMesa9 libOSMesa9-32bit libgbm1 libgbm1-32bit libvdpau_nouveau libvdpau_r300 libvdpau_r600 libvdpau_radeonsi libvulkan_intel libwayland-egl1 libxatracker2 - Drop u_Mesa_i965-import-prime-buffers.patch: Upstream fixed the bug in a different way, and we should not keep the now obsolete patch (boo#991638, fdo#71759). - update to 13.0.0 - openGL 4.5 with i965 driver on intel bbroadwell and newer hw - openGL ES for haswell supports 3.1, skylake 3.2 - fixes for intel vulkan driver - early support fot GP100 - better radeonSI performace - dropped U_r300g-Set-R300_VAP_CNTL-on-RSxxx-to-avoid-triangle-flickering.patch - refreshed u_Mesa_i965-import-prime-buffers.patch ==== apache-commons-dbcp ==== - Search for jta not jta-api as SLE has issues locating the api while the jta is just simple symlink ==== btrfsprogs ==== Version update (4.7.3 -> 4.8.2) Subpackages: btrfsprogs-udev-rules libbtrfs0 - update to 4.8.2 * convert: also convert file attributes * convert: fix wrong tree block alignment for unalianged block group * check: quota verify fixes, handle reloc tree * build: add stub for FIEMAP_EXTENT_SHARED, compiles on ancient kernels * build: add stub for BUILD_ASSERT when ioctl.h is included * dump-tree: don't crash on unrecognized tree id for -t * tests: * add more ioctl tests * convert: more symlink tests, attribute tests * quota verify for reloc tree * other cleanups - Add ability to provide site specific defaults for mkfs (FATE#320615). * Only used for SLES11 defaults. - Added patch mkfs-default-features.patch - update to 4.8.1 * 32bit builds fixed * build without backtrace support fixed - update to 4.8 * error handling improvements all over the place * new fuzzed images, test updates * doc fixups * minor cleanups and improvements * kernel library helpers moved to own directory * qgroup: fix regression leading to incorrect status after check, introduced in 4.7 - update to 4.7.3 * fixed free space tree compat status * check: low-mem mode: handle partially dropped snapshots * dump-super: consolidate options for superblock copy * tree-stats: check mount status * subvol delete: handle verbosity option * defrag: print correct error string * mkfs: fix reading rotational status * other: * UBSAN build option * documentation updates * enhanced tests: convert, fuzzed images, more tools to run on fuzzed images - removed btrfsprogs-only-install-udev-rules-for-udev-190.patch: fix build - update to 4.7.2 * check: * urgent fix: false report of backref mismatches; do not --repair last unaffected version 4.6.1 (code reverted to that state) * fuzzing and fixes * added more sanity checks for various structures * testing images added * build: udev compatibility: do not install .rules on version < 190 * other: * dump-super: do not crash on garbage value in csum_type * minor improvements in messages and help strings * documentation: * filesystem features - Add new btrfsprogs-udev-rules package to contain the udev rules. - Fix packaging for udev rules: - btrfs builtin didn't exist prior to udev v190, so the rules must depend on that version. - Added patch: * btrfsprogs-only-install-udev-rules-for-udev-190.patch - update to 4.7.1 * check: * new optional mode: optimized for low memory usage (memory/io tradeoff) * --mode=lowmem, not default, still considered experimental * does not work with --repair yet * convert: regression fix, ext2_subvol/image rw permissions * mkfs/convert: * two-staged creation, partially created filesystem will not be recognized * improved error handling (fewer BUG_ONs) * convert: preparation for more filesystems to convert from * documentation updates: quota, qgroup * other * message updates * more tests * more build options, enhanced debugging - update to 4.7 * convert: fix creating discontig extents * check: speed up traversing heavily reflinked extents within a file * check: verify qgroups of higher levels * check: repair can now fix wrong qgroup numbers * balance: new option to run in the background * defrag: default extent target size changed to 32MiB * du: silently skip non-btrfs dirs/files * documentation updates: btrfs(5), btrfs(8), balance, subvolume, scrub, filesystem, convert * bugfixes: * unaligned access (reported for sparc64) in raid56 parity calculations * use /bin/bash * other stability fixes and cleanups * more tests - Removed patches: * 0002-btrfs-progs-btrfsck-verify-qgroups-above-level-0.patch * 0003-btrfs-progs-btrfsck-write-corrected-qgroup-info-to-d.patch - update to 4.6.1 * fi resize: negative resize argument accepted again * qgroup rescan: fix skipping when rescan is in progress * mkfs: initialize stripesize to correct value * testsuite updates, mostly convert tests * documentation updates * btrfs-device, btrfs-restore manual pages enhanced * misc fixups - update to 4.6 * convert - major rewrite: * fix a long-standing bug that led to mixing data blocks into metadata block groups * the workaround was to do full balance after conversion, which was recommended practice anyway * explicitly set the lowest supported version of e2fstools to 1.41 * provide and install udev rules file that addresses problems with device mapper devices, renames after removal * send: new option: quiet * dev usage: report slack space (device size minus filesystem area on the dev) * image: support DUP * build: short options to enable debugging builds * other: * code cleanups * build fixes * more tests and other enhancements * Removed patches: * 0001-btrfs-progs-free-qgroup-counts-in-btrfsck.patch * 0169-btrfs-progs-udev-add-rules-for-dm-devices.patch * btrfs-progs-no-PKG_CHECK_VAR - btrfsck updates for qgroup verification and repair (fate#318144) * We can now check all qgroup levels * btrfsck will write out corrected qgroups when run with --repair - Added patch: 0001-btrfs-progs-free-qgroup-counts-in-btrfsck.patch - Added patch: 0002-btrfs-progs-btrfsck-verify-qgroups-above-level-0.patch - Added patch: 0003-btrfs-progs-btrfsck-write-corrected-qgroup-info-to-d.patch - update to 4.5.3 * ioctl: fix unaligned access in buffer from TREE_SEARCH; might cause SIGBUS on architectures that do not support unaligned access and do not performa any fixups * improved validation checks of superblock and chunk-related structures * subvolume sync: fix handling of -s option * balance: adjust timing of safety delay countdown with --full-balance * rescue super-recover: fix reversed condition check * check: fix bytes_used accounting * documentation updates: mount options, scrub, send, receive, select-super, check, mkfs * testing: new fuzzed images, for superblock and chunks - fix build failure on 13.1: conditional default for udevdir - fix build failure on SLE11SP4: wrong check in makefile - Add udev rules for dm devices (bsc#912170 bsc#888215) - Added patch: 0169-btrfs-progs-udev-add-rules-for-dm-devices.patch - Added patch: btrfs-progs-no-PKG_CHECK_VAR - update to 4.5.2 * new/moved command: btrfs-calc-stats -> btrfs inspect tree-stats * check: fix false alert for metadata blocks crossing stripe boundary * check: catch when qgroup numbers mismatch * check: detect running quota rescan and report mismatches * balance start: add safety delay before doing a full balance * fi sync: is now silent * fi show: don't miss filesystems with partially matching uuids * dev ready: accept only one argument for device * dev stats: print "devid:N" for a missing device instead of "(null)" * other: * lowest supported version of e2fsprogs is 1.41 * minor cleanups, test updates - Removed patch: 2000-btrfs-full-balance-warning.diff - update to 4.5.1 * mkfs: allow DUP on multidev fs * fix static build - update to 4.5 * new/moved commands * btrfs-show-super -> btrfs inspect-internal dump-super * btrfs-debug-tree -> btrfs inspect-internal dump-tree * new commands * btrfs fi du - calculate disk usage, including shared extents * enhancements * device delete - delete by id (needs kernel support, not merged to 4.6) * check - new option to specify chunk root * debug-tree/dump-tree - option -t understands human readable name of the tree (along numerical ids) * btrfs-debugfs - can dump block group information * bugfixes * all commands should accept the option separator "--" * several fixes in device scan * restore works on filesystems with sectorsize > 4k * debug-tree/dump-tree - print compression type as string * subvol sync: fix crash, memory corruption * argument parsing fixes: subvol get-default, qgroup create/destroy/assign, inspect subvolid-resolve * check for block device or regular file in several commands * other * documentation updates * manual pages for the moved tools now point to btrfs-filesystem * testsuite updates - Removed patch (upstream): 0001-btrfs-progs-libbtrfs-remove-max-min-macros-from-API.patch - Recommend btrfsmaintenance - hide min/max macros clashing with gcc 6 (bnc#966257) (0001-btrfs-progs-libbtrfs-remove-max-min-macros-from-API.patch) - update to 4.4.1 * find-root: don't skip the first chunk * free-space-tree compat bits fix * build: target symlinks * documentation updates * test updates - update to 4.4 * mkfs.btrfs --data dup * support balance filters added/enhanced in linux 4.4 * manual pages enhanced (btrfs, mkfs, mount, filesystem, balance) * 'btrfs filesystem usage' works with mixed blockgroups * build: installation to /usr/local * build: the 'ar' tool is properly deteced during cross-compilation * improved stability on fuzzed/crafted images when reading sys array in superblock * debug-tree: option -t understands ids for tree root and chnuk tree * check: properly reset nlink of multi-linked file * chunk recovery: fix floating point exception * chunk recovery: endianity bugfix during rebuild * mkfs with 64K pages and nodesize reported superblock checksum mismatch - Removed patches: * 0001-btrfs-progs-mkfs-use-correct-size-for-superblock-csu.patch * fix-doc-build-on-SLE11SP3.diff - Fix missing dependency on coreutils for initrd macros (boo#958562) - Call missing initrd macro at post / postun (boo#958562) - fix mkfs failure on ppc64 (or with sectorsize > 4k) (bsc#956819) - Added patch: 0001-btrfs-progs-mkfs-use-correct-size-for-superblock-csu.patch - update to 4.3.1 * fixes * device delete: recognize 'missing' again * mkfs: long names are not trimmed when doing ssd check * support partitioned loop devices * other * replace several mallocs with on-stack variables * more memory allocation failure handling * add tests for bugs fixed * cmd-device: switch to new message printing helpers * minor code cleanups - update to 4.3 * mkfs * mixed mode is not forced for filesystems smaller than 1GiB * mixed mode broken with mismatching sectorsize and nodesize, fixed * print version info earlier * print devices sorted by id * do not truncate target image with --rootsize * fi usage: * don't print global block reserve * print device id * minor output tuning * other cleanups * calc-size: * div-by-zero fix on an empty filesystem * fix crash * bugfixes: * more superblock sanity checks * consistently round size of all devices down to sectorsize * misc leak fixes * convert: don't try to rollback with a half-deleted ext2_saved subvolume * other: * check: add progress indicator * scrub: enahced error message * show-super: read superblock from a given offset * add README * docs: update manual page for mkfs.btrfs, btrfstune, balance, convert and inspect-internal * build: optional build with more warnings (W=...) * build: better support for static checkers * build: html output of documentation * pretty-print: last_snapshot for root_item * pretty-print: stripe dev uuid * error reporting wrappers, introduced and example use * refactor open_file_or_dir * other docs and help updates * testing: * test for nodes crossing stripes * test for broken 'subvolume sync' * basic tests for mkfs, raid option combinations * basic tests for fuzzed images (check) * command intrumentation (eg valgrind) * print commands if requested * add README for tests - build btrfsprogs-static package for 13.2 and Factory, package with static versions of the utilities, aimed for rescue environments - update to 4.2.3 - subvol sync: make it actually work again - scanning: do not scan already discovered filesystems (minor optimization) - convert: better error message in case the filesystem is not finalized - restore: off-by-one symlink path check fix - update to 4.2.2 - fi label: use fallback if the label ioctl is not available - convert: check nodesize constraints against commandline features (-O) - scrub: report status 'running' until all devices are finished - device scanning might crash in some scenarios - fi usage: print summary for non-root users - update to 4.2.1 - fix an off-by-one error in cross-stripe boundary check - convert: don't write uninitialized data to image - image: don't loop with option -t0 - image: don't create threads if compression is not requested - Removed patches: * 0001-btrfs-progs-fix-cross-stripe-boundary-check.patch - make mkfs work with 64k nodesize again, notably fixes mkfs on ppc64 (bsc#945229) - Added patch: * 0001-btrfs-progs-fix-cross-stripe-boundary-check.patch - version 4.2 * enhancements: * mkfs: do not create extra single chunks on multiple devices * resize: try to guess the minimal size, 'inspect min-dev-size' * qgroup assign: add option to schedule rescan * chunk-recover: be more verbose about the scanning process * fixes: * check: * find stripes crossing stripe boundary -- created by convert * print correct range for file hole when there are no extents and learn how to fix it * replace: more sanity checks * convert: concurrency fixes related to reporting progress * find-root: option -a will not skip the current root anymore * subvol list: fix occasional crash * do not create stripes crossing stripe boundary * build: * fixes for musl libc * preliminary support for android (not working yet, more code changes needed) * new EXTRA_CFLAGS and EXTRA_LDFLAGS * other: * lots of cleanups * tests: lots of updates, new tests, framework improvements * documentation updates * debugging: print-tree shows stripe length - Removed patches (upstreamed): * 2104-get-min-size-for-resize.patch * 2105-move-min-resize-implementation-to-inspec.patch * 2106-inspect-add-command-min-dev-size.patch - add warning before full balance starts (bsc#940467, fate#319317) - Added patches: 2000-btrfs-full-balance-warning.diff - Add feature to get minimum size a filesystem can be resized to (FATE#317897). - Added patches: * 2104-get-min-size-for-resize.patch * 2105-move-min-resize-implementation-to-inspec.patch * 2106-inspect-add-command-min-dev-size.patch - version 4.1.2 - mkfs: bugfix, previous version does not create entierly correct filesystem (has to be recreated) - version 4.1.1 * bugfixes - defrag: threshold overflow fix - fsck: - check if items fit into the leaf space - fix wrong nbytes - mkfs: - create only desired block groups for single device - preparatory work for fix on multiple devices * enhancements - new alias for 'device delete': 'device remove' * other - fix compilation on old gcc (4.3) - documentation updates - debug-tree: print nbytes - test: image for corrupted nbytes - corupt-block: let it kill nbytes - spec: drop libacl dependency - version 4.1 * bugfixes - fsck.btrfs: no bash-isms - bugzilla 97171: invalid memory access (with tests) - receive: - cloning works with --chroot - capabilities not lost - mkfs: do not try to register bare file images - option --help accepted by the standalone utilities * enhancements - corrupt block: ability to remove csums - mkfs: - warn if metadata redundancy is lower than for data - options to make the output quiet (only errors) - mixed case names of raid profiles accepted - rework the output: - more comprehensive, 'key: value' format - subvol: - show: - print received uuid - update the output - new options to specify size units - sync: - grab all deleted ids and print them as they're removed, previous implementation only checked if there are any to be deleted - change in command semantics - scrub: print timestamps in days HMS format - receive: - can specify mount point, do not rely on /proc - can work inside subvolumes - send: - new option to send stream without data (NO_FILE_DATA) - convert: - specify incompat features on the new fs - qgroup: - show: distinguish no limits and 0 limit value - limit: ability to clear the limit - help for 'btrfs' is shorter, 1st level command overview - debug tree: print key names according to their C name * new - rescure zero-log - btrfsune: - rewrite uuid on a filesystem image - new option to turn on NO_HOLES incompat feature * deprecated - standalone btrfs-zero-log * other - testing framework updates - uuid rewrite test - btrfstune feature setting test - zero-log tests - more testing image formats - manual page updates - ioctl.h synced with current kernel uapi version - convert: preparatory works for more filesystems (reiserfs pending) - use static buffers for path handling where possible - add new helpers for send uilts that check memory allocations, switch all users, deprecate old helpers - Makefile: fix build dependency generation - map-logical: make it work again - Install bash completion for btrfs. - version 4.0 * resize: * don't accept file as an argument (it's confusing) * print better error message in case of an error * restore: optionally restore metadata (time, mode, uid/gid) * receive: optionally enforce chroot * new rescue subcommand 'zero-log', same as btrfs-zero-log, but now also part of the main utility * check: * free space checks match kernel, fixes incorrect reports * convert: fix setting of checksum bit if --no-datasum is used * fsck.btrfs: don't print messages * fix quota rescan on PPC64 (mangled ioctl number) * test updates * documentation: files renamed to .asciidoc, misc fixups - version 3.19.1 - convert: - new option to specify metadata block size - --no-progress actually works - restore: properly handle the page boundary corner case - build fixes: - missing macro from public header, BTRFS_BUILD_VERSION - wrong handling of --enable-convert - fi usage: reports correct space for degraded mounts - other: - mkfs: help string updates - completion: added 'usage' subcommands - cleanups in qgroup code, preparatory work - version 3.19 - btrfs-image - restore can now run in parallel threads - fixed restore of multiple image from multiple devices onto a single dev - introduced metadump v2 - check - make --init-csum-tree and --init-extent-tree work together - find-new - option to search through all metadata even if a root was already found - convert - show progress by default, can be turned off - corrupt-block - option to work on a specific root - bash completion script for all subcommands - spec: convert to autotools Removed patch 0169-btrfs-progs-Check-metadata-mirrors-in-find-root.patch - add COPYING - version 3.18.2 * qgroup show: print human readable sizes, options to say otherwise * check: new option to explicitly say no to writes * mkfs: message about trimming is not printed to stderr * fi show: fixed return value * tests: new infrastructure * btrfstune: force flag can be used together with seeding option * backtrace support is back * getopt cleanups * doc and help updates - version 3.18.1 - minor fixes - documentation updates - version 3.18 - mkfs - skinny-metadata feature is now on by default, first introduced in kernel 3.10 - filesystem usage - give an overview of fs usage in a way that's more comprehensible than existing 'fi df' - device usage - more detailed information about per-device allocations - check: - option to set a different tree root byte number - ability to link lost files to lost+found, caused by a recent kernel bug - repair of severely corrupted fs (use with care) - convert - option to show progress - subvol create - print the commit mode inline, print the global mode only if --verbose - other updates: musl-libc support, coverity bugfixes, new test images, documentation - Removed patches (upstreamed): * 0010-btrfs-progs-move-group-type-and-profile-pretty-print.patch * 0011-btrfs-progs-Enhance-the-command-btrfs-filesystem-df.patch * 0012-btrfs-progs-Add-helpers-functions-to-handle-the-prin.patch * 0013-btrfs-progs-Add-command-btrfs-filesystem-disk-usage.patch * 0014-btrfs-progs-Add-btrfs-device-disk-usage-command.patch * 0015-btrfs-progs-cleanup-dead-return-after-usage-for-fi-d.patch * 0016-btrfs-progs-Fix-memleak-in-get_raid56_used.patch * 0017-Btrfs-progs-fi-usage-free-memory-if-realloc-fails.patch * 0019-btrfs-progs-add-original-df-and-rename-disk_usage-to.patch * 0020-btrfs-progs-move-device-usage-to-cmds-device-more-cl.patch * 0021-btrfs-progs-check-if-we-can-t-get-info-from-ioctls-d.patch * 0022-btrfs-progs-zero-out-structures-before-calling-ioctl.patch * 0024-btrfs-progs-Print-more-info-about-device-sizes.patch * 0025-btrfs-progs-compare-unallocated-space-against-the-co.patch * 0026-btrfs-progs-add-section-of-overall-filesystem-usage.patch * 0027-btrfs-progs-cleanup-filesystem-device-usage-code.patch * 0028-btrfs-progs-rework-calculations-of-fi-usage.patch * 0029-btrfs-progs-replace-df_pretty_sizes-with-pretty_size.patch * 0030-btrfs-progs-clean-up-return-codes-and-paths.patch * 0031-btrfs-progs-move-global-reserve-to-overall-summary.patch - version 3.17.3 - convert: fix conversion of sparse ext* filesystems - show: resolve to the correct path - fsck: more verbose error for root dir problems - version 3.17.2 - check improvements - add ability to replace missing dir item/dir indexes - fix missing inode items - create missing root dirid - corrupt block: enhancements for testing fsck - zero-log: able to reset a fs with bogus log tree pointer (bko#72151) - package mkinitrd scripts conditionally (bsc#893577) - spec: minor updates - version 3.17.1 - fi df: argument handling - fix linking with libbtrfs - replace: better error reporting - fi show: fixed stall if run concurrently with balance - check: fixed argument parsing for --subvol-extents - fi df: SI prefixes corrected - Added patches: * fix-doc-build-on-SLE11SP3.diff - Removed patches: * 0042-btrfs-progs-fix-linking-with-libbtrfs.patch * 0043-btrfs-progs-libbtrfs-make-exported-headers-compatibl.patch - Modified patches: * 0011-btrfs-progs-Enhance-the-command-btrfs-filesystem-df.patch * 0012-btrfs-progs-Add-helpers-functions-to-handle-the-prin.patch * 0019-btrfs-progs-add-original-df-and-rename-disk_usage-to.patch - version 3.17 - check: --init-csum-tree acutally does something useful, rebuilds the whole csum tree - /dev scanning for btrfs devices is gone - /proc/partitions scanning is gone, blkid is used exclusively - new subcommand subvolume sync - filesystem df: new options to set unit format - convert: allow to copy label from the origin, or specify a new one - Modified patches: * 0011-btrfs-progs-Enhance-the-command-btrfs-filesystem-df.patch * 0012-btrfs-progs-Add-helpers-functions-to-handle-the-prin.patch * 0013-btrfs-progs-Add-command-btrfs-filesystem-disk-usage.patch * 0014-btrfs-progs-Add-btrfs-device-disk-usage-command.patch * 0015-btrfs-progs-cleanup-dead-return-after-usage-for-fi-d.patch * 0016-btrfs-progs-Fix-memleak-in-get_raid56_used.patch * 0017-Btrfs-progs-fi-usage-free-memory-if-realloc-fails.patch * 0019-btrfs-progs-add-original-df-and-rename-disk_usage-to.patch * 0020-btrfs-progs-move-device-usage-to-cmds-device-more-cl.patch * 0021-btrfs-progs-check-if-we-can-t-get-info-from-ioctls-d.patch * 0022-btrfs-progs-zero-out-structures-before-calling-ioctl.patch * 0024-btrfs-progs-Print-more-info-about-device-sizes.patch * 0025-btrfs-progs-compare-unallocated-space-against-the-co.patch * 0026-btrfs-progs-add-section-of-overall-filesystem-usage.patch * 0027-btrfs-progs-cleanup-filesystem-device-usage-code.patch * 0029-btrfs-progs-replace-df_pretty_sizes-with-pretty_size.patch * 0030-btrfs-progs-clean-up-return-codes-and-paths.patch * 0031-btrfs-progs-move-global-reserve-to-overall-summary.patch - Added patches: * 0010-btrfs-progs-move-group-type-and-profile-pretty-print.patch * 0028-btrfs-progs-rework-calculations-of-fi-usage.patch * 0042-btrfs-progs-fix-linking-with-libbtrfs.patch * 0043-btrfs-progs-libbtrfs-make-exported-headers-compatibl.patch - Removed patches: * 0006-Btrfs-progs-fsck-clear-out-log-tree-in-repair-mode.patch * 0007-Btrfs-progs-fsck-avoid-pinning-same-block-several-ti.patch * 0008-Btrfs-progs-fsck-add-ability-to-check-reloc-roots.patch * 0018-btrfs-progs-read-global-reserve-size-from-space-info.patch * 0023-btrfs-progs-print-B-for-bytes.patch * 0028-btrfs-progs-extend-pretty-printers-with-unit-mode.patch * 0164-btrfs-progs-convert-set-label-or-copy-from-origin.patch * 0171-btrfs-progs-make-free-space-checker-work-on-non-4k-s.patch - version 3.16.2 - fsck: handle bad extent mapping - image: make it work on a balanced fs - btrfs-show-super: print flags in human readable way - documentation updates - version 3.16.1 - library version defines - subvol list: -R to print received UUID - fixed detection of multiple mounts on the same directory - restore: misc fixes - other fixes - Modified patches (sync with pending upstream versions): * 0011-btrfs-progs-Enhance-the-command-btrfs-filesystem-df.patch * 0012-btrfs-progs-Add-helpers-functions-to-handle-the-prin.patch * 0013-btrfs-progs-Add-command-btrfs-filesystem-disk-usage.patch * 0018-btrfs-progs-read-global-reserve-size-from-space-info.patch * 0020-btrfs-progs-move-device-usage-to-cmds-device-more-cl.patch * 0024-btrfs-progs-Print-more-info-about-device-sizes.patch * 0025-btrfs-progs-compare-unallocated-space-against-the-co.patch * 0028-btrfs-progs-extend-pretty-printers-with-unit-mode.patch * 0029-btrfs-progs-replace-df_pretty_sizes-with-pretty_size.patch - Removed patch: library-version-defines.patch (upstream) - send-stream API users updatd, drop the workaround - Removed patch: send-stream-api-wokaround.patch - workaround for send api breakage - Added patch: send-stream-api-wokaround.patch - add api versioning and package version.h (now 0.1.1) - Added patches: * library-version-defines.patch - version 3.16 - show-super: skip unrecognized sb, add option to force - debug-tree: print tree by id - mkfs: new option to specify UUID - receive: new option to limit number of errors - check: new option to verify quotas - check: reduced memory requirements - check: new option to print extent sharing - restore: check length before decompression - restore: more error handling - balance: new filter 'limit' - recover: allow to read all sb copies - restore: option to loop during restoring - mkfs: drop experimental notice - btrfstune: new option to force dangerous changes - documentation updates - Deleted patches (upstream): * 0001-btrfs-progs-doc-fix-symlink-target-for-btrfsck.8.patch * 0200-btrfs-progs-print-qgroup-excl-as-unsigned.patch * 0201-btrfs-progs-import-ulist.patch * 0202-btrfs-progs-add-quota-group-verify-code.patch * 0203-btrfs-progs-show-extent-state-for-a-subvolume.patch * 0204-btrfs-progs-ignore-orphaned-qgroups-by-default.patch * btrfs-progs-canonicalize-pathnames-for-device-commands - Refreshed patches: * 0006-Btrfs-progs-fsck-clear-out-log-tree-in-repair-mode.patch * 0011-btrfs-progs-Enhance-the-command-btrfs-filesystem-df.patch * 0012-btrfs-progs-Add-helpers-functions-to-handle-the-prin.patch * 0013-btrfs-progs-Add-command-btrfs-filesystem-disk-usage.patch * 0028-btrfs-progs-extend-pretty-printers-with-unit-mode.patch * 0164-btrfs-progs-convert-set-label-or-copy-from-origin.patch - refresh references on the following patches: * 0200-btrfs-progs-print-qgroup-excl-as-unsigned.patch * 0201-btrfs-progs-import-ulist.patch * 0202-btrfs-progs-add-quota-group-verify-code.patch * 0203-btrfs-progs-show-extent-state-for-a-subvolume.patch - btrfs-progs: ignore orphaned qgroups by default - Added patch: * 0204-btrfs-progs-ignore-orphaned-qgroups-by-default.patch - btrfs-progs: show extent state for a subvolume (bnc#865621) - Added patch: * 0203-btrfs-progs-show-extent-state-for-a-subvolume.patch - btrfs-progs: canonicalize pathnames for device commands (bnc#880486). - Added patch: * btrfs-progs-canonicalize-pathnames-for-device-commands - fsck: fix checking on filesystems with large sectorsize (bnc#872286) - Added patches: * 0171-btrfs-progs-make-free-space-checker-work-on-non-4k-s.patch - Do not package btrfs-find-root and btrfs-select-super by default. - Removed printing byte number for every slot (bnc#872364). - Removed patch: * 0170-btrfs-progs-In-find-root-dump-bytenr-for-every-slot.patch - update to upstream 3.14.2 - man: separate pages for all subcommands - minor bugfixes - spec: removed upstreamed patches, update build dependencies - Added patches: * 0001-btrfs-progs-doc-fix-symlink-target-for-btrfsck.8.patch - Removed patches: * 0001-Btrfs-progs-fix-check-to-test-trim-support.patch * 0002-Btrfs-progs-fsck-fix-double-free-memory-crash.patch * 0003-Btrfs-progs-mkfs-Remove-zero_end-1-since-it-has-been.patch * 0004-btrfs-progs-fix-wrong-max-system-array-size-check-in.patch * 0005-btrfs-progs-move-arg_strtou64-to-a-separate-file-for.patch * 0009-btrfs-progs-prevent-close_root-if-the-root-to-close-.patch * 0010-btrfs-progs-fix-mkfs.btrfs-segfault-with-features-op.patch - add quota group verify patches, sent to list near end of the week starting 5/4/2014 - updates btrfsck with the ability to verify quota groups - Update the changelog with some sad version of diffstat output to meet requirements. - Added patches: * 0200-btrfs-progs-print-qgroup-excl-as-unsigned.patch * 0201-btrfs-progs-import-ulist.patch * 0202-btrfs-progs-add-quota-group-verify-code.patch - add quota group verify patches, sent to list near end of the week starting 5/4/2014 - updates btrfsck with the ability to verify quota groups - update to upstream 3.14.1 - mkfs: - fix TRIM detection - do not zero-out end of device unconditionally - no crash with --features option - fsck: - clear log tree in repair mode - check reloc roots - btrfs - reworked space reporting (bnc#873106) - btrfs fi usage - new command - btrfs dev usage - new command - btrfs fi df - enhanced output with GlobalReserve - Removed patches: * 0001-btrfs-progs-move-arg_strtou64-to-a-separate-file-for.patch - Added patches: * 0001-Btrfs-progs-fix-check-to-test-trim-support.patch * 0002-Btrfs-progs-fsck-fix-double-free-memory-crash.patch * 0003-Btrfs-progs-mkfs-Remove-zero_end-1-since-it-has-been.patch * 0004-btrfs-progs-fix-wrong-max-system-array-size-check-in.patch * 0005-btrfs-progs-move-arg_strtou64-to-a-separate-file-for.patch * 0006-Btrfs-progs-fsck-clear-out-log-tree-in-repair-mode.patch * 0007-Btrfs-progs-fsck-avoid-pinning-same-block-several-ti.patch * 0008-Btrfs-progs-fsck-add-ability-to-check-reloc-roots.patch * 0009-btrfs-progs-prevent-close_root-if-the-root-to-close-.patch * 0010-btrfs-progs-fix-mkfs.btrfs-segfault-with-features-op.patch * 0011-btrfs-progs-Enhance-the-command-btrfs-filesystem-df.patch * 0012-btrfs-progs-Add-helpers-functions-to-handle-the-prin.patch * 0013-btrfs-progs-Add-command-btrfs-filesystem-disk-usage.patch * 0014-btrfs-progs-Add-btrfs-device-disk-usage-command.patch * 0015-btrfs-progs-cleanup-dead-return-after-usage-for-fi-d.patch * 0016-btrfs-progs-Fix-memleak-in-get_raid56_used.patch * 0017-Btrfs-progs-fi-usage-free-memory-if-realloc-fails.patch * 0018-btrfs-progs-read-global-reserve-size-from-space-info.patch * 0019-btrfs-progs-add-original-df-and-rename-disk_usage-to.patch * 0020-btrfs-progs-move-device-usage-to-cmds-device-more-cl.patch * 0021-btrfs-progs-check-if-we-can-t-get-info-from-ioctls-d.patch * 0022-btrfs-progs-zero-out-structures-before-calling-ioctl.patch * 0023-btrfs-progs-print-B-for-bytes.patch * 0024-btrfs-progs-Print-more-info-about-device-sizes.patch * 0025-btrfs-progs-compare-unallocated-space-against-the-co.patch * 0026-btrfs-progs-add-section-of-overall-filesystem-usage.patch * 0027-btrfs-progs-cleanup-filesystem-device-usage-code.patch * 0028-btrfs-progs-extend-pretty-printers-with-unit-mode.patch * 0029-btrfs-progs-replace-df_pretty_sizes-with-pretty_size.patch * 0030-btrfs-progs-clean-up-return-codes-and-paths.patch * 0031-btrfs-progs-move-global-reserve-to-overall-summary.patch - own mkinitrd directories - add missing symbol to library (bnc#873164) - add version dependency for devel package - Added patches: * 0001-btrfs-progs-move-arg_strtou64-to-a-separate-file-for.patch - fsck: fixes and enahancements to --init-extent-tree mode - fsck: chunk-recover updates - scrub: add force option -f - send: check if subvolumes are read-only - subvol snapshot: add options to affect commit behaviour - btrfs: add properties command group - restore: add dry-run option - restore: fix restoring of compressed files - mkfs: support for no-holes feature - mkfs: option -r deals with hardlinks and relative paths - mkfs: discard phase is interruptible - documentation updates - cleaned spec file - Removed patches: * 0162-btrfs-progs-fix-loop-device-mount-checks.patch * 0165-Revert-btrfs-progs-update-options-in-find-root.c.patch * 0166-Btrfs-progs-add-some-verbose-output-to-find-root.patch - bump version to 3.12 - update tarball and remove upstreamed patches - fsck, image, restore: various improvements and fixes - btrfs: quota rescan (fate#312751) - fsck updates - more mkfs sanity checks - qgroup rescan wait - Added patches: * 0050-Btrfs-progs-commit-the-csum_root-if-we-do-init-csum-.patch * 0051-btrfs-progs-Fix-getopt-on-arm-ppc-platforms.patch * 0052-btrfs-progs-fix-duplicate-__-su-typedefs-on-ppc64.patch * 0053-btrfs-progs-use-reentrant-localtime.patch * 0054-btrfs-progs-don-t-have-to-report-ENOMEDIUM-error-dur.patch * 0055-Btrfs-progs-added-btrfs-quota-rescan-w-switch-wait.patch * 0056-btrfs-progs-fix-qgroup-realloc-inheritance.patch * 0057-Btrfs-progs-fix-restore-command-leaving-corrupted-fi.patch * 0058-btrfs-progs-avoid-write-to-the-disk-before-sure-to-c.patch * 0059-btrfs-progs-error-if-device-for-mkfs-is-too-small.patch * 0060-btrfs-progs-error-if-device-have-no-space-to-make-pr.patch * 0061-btrfs-progs-calculate-available-blocks-on-device-pro.patch * 0062-Btrfs-progs-keep-track-of-transid-failures-and-fix-t.patch - Change udev rule filename in setup-btrfs.sh to /usr/lib/udev/rules.d/64-btrfs.rules from from /usr/lib/udev/rules.d/80-btrfs.rules (bnc#839960 comment#7) - Remove udev rules file - udev packages one itself (bnc#839960). - update to upstream master (194aa4a1) - btrfs-restore: deal with NULL returns from read_node_slot - btrfs-restore: use the correct leafsize when reading the FS location - btrfs-find-root: Add options to control generation and level - btrfsck: fix incorrect casting on items in the corrupt_blocks tree - Btrfs-progs: fix closing of devices - Btrfs-progs: enhance btrfs-image to restore image onto multiple disks - Btrfs-progs: cleanup btrfs-image usage - Btrfs-progs: delete fs_devices itself from fs_uuid list before freeing - Btrfs-progs: skip open devices which is missing - Btrfs-progs: fix misuse of skinny metadata in btrfs-image - Btrfs-progs: recover raid0/raid10/raid5/raid6 metadata chunk - Btrfs-progs: Add chunk rebuild function for RAID1/SINGLE/DUP - Btrfs-progs: introduce list_{first, next}_entry/list_splice_tail{_init} - Btrfs-progs: Add chunk recover function - using old chunk items - Btrfs-progs: Add block group check funtion - Btrfs-progs: extend the extent cache for the device extent - Btrfs-progs: use rb-tree instead of extent cache tree for fs/file roots - Btrfs-progs: introduce common insert/search/delete functions for rb-tree - Btrfs-progs: cleanup similar code in open_ctree_* and close_ctree - Btrfs-progs: Don't free the devices when close the ctree - Btrfs-progs: don't close the file descriptor 0 when closing a device - Btrfs-progs: fix missing recow roots when making btrfs filesystem - Add fix for passing super_nr while opening ctree - btrfs-progs-mkfs-default-extref.diff: turn on extended refs by default, (aka hardlink count limtitation) (bnc#835695) - added 0040-btrfs-progs-fix-loop-device-mount-checks.patch: fix loop mount detection again (bnc#834173) - Simplify checks in mkinitrd scripts. They are always true because they come from the same package Use relative paths to binaries - Move udev rules to /usr. - Adjust rules to call binary from /usr - Simplify fsck.btrfs, its just a dummy until fixed - update to upstream master (f00dd8386a57d241d0f7c) - Make requirement on libattr-devel explicit - initrd support: add module (bnc#750185, bnc#727383) - set correct file mode if writing replacement fsck - fix build failure - add btrfs-debug-tree to initrd - adjust fs size to correct size (bnc#744593) - man page documentation updates - do not package obsolete utilities - mkfs: store correct size of device in superblock (bnc#730103) - updated restriper/balance commands to match kernel version - place binaries in /usr tree (UsrMerge project) - adjust mkinitrd scrippt accordingly - add btrfsck repair options for: - rebuild extent records - fix block group accounting - reset csums for rescue nodatasum mount - prune corrupt extent allocation tree blocks - device scanning fixes for dm and multipath (bnc#749540) - initrd support: move btrfs device scan after block device setup - documentation updates - add csize for file commpressed size - updated restore utility - patch license to follow spdx.org standard - btrfs-progs-fix-open_ctree_usage_segfaults.patch: fix segfaults from bnc#710486 due to unchecked usage of return value of open_ctree() [fixed compilation warnings] - pull upstream, replace existing patches, spec update - update 'restore' utility - lzo support - tools may now take earlies superblock when opening the fs - other fixes - pull integration-20111030 branch - mkfs: force mkfs if desired - other fixes - add btrfs-dump-super to mkinitrd - other fixes - skip non-existent devices or without media - documentation updates - scrubbing single device - graceful error handling when opening fs fails - updated mkinitrd script to scan devices before mount (bnc#727383) - add several tools to mkinitrd if root fs is btrfs - pull upstream branch and delete local patches - btrfsck: ignore -a (bnc#655906) - btrfsck: fix strerror value - Remove redundant tags/sections from specfile - Use %_smp_mflags for parallel build - add patch for local version override as we do not build from git, and avoid doubled "Btrfs" in output of 'btrfs' - reorder help for 'get-default' right after 'set-default' - add option -p to print parent subvolume - add subvolume 'get-default' subsubcommand - remove debugging printf from 0001-Btrfs-progs-add-a-btrfs-select-super-command-to-over.patch - add support for currently available kernel features: - add scrub subcommand - scan /proc/partitions by default (or use --all-devices for all) - mkfs fixes and improvements - documentation fixes - fix failing on deleted loop mounts (bnc#697671) - update from git: - add btrfs-select-super utility - add btrfs-label utility - allow mixed data+metadata (option --mixed) - allow populating new filesystem with files (option --rootdir) - allow discard support in mkfs - lzo support - deprecate 'btrfsctl' 'btrfs-vol' 'btrfs-show' - other bugfixes and documentation improvements - change to a hardlink - add link for fsck.btrfs (bnc#665899) - update to v0.19-35-g1b444cd: * used space accounting fix for the converter * Add btrfs-list for listing subvolumes * Add new util: 'btrfs' * multidevice support for check_mounted * check slash in deleting subvolumes * Add btrfsck option to select the super block copy * btrfs-debug-tree: add -d option to print only the device mapping - fix crash on creating filesystems (bnc#603620) - revert last change (bnc#599224#c3) - add hardlink from fsck.btrfs (bnc#599224) - fix memory leak (bnc#537633) - Updated to latest repo version. - used space accounting fix for the converter - btrfsctl: add snapshot/subvolume destroy ioctl - btrfsck: check root back/forward references - Add btrfs-map-logical program to map and read logical block numbers - build btfs-convert (bnc#572912) - enable parallel build - added Supplements - move apps to /sbin - update to 0.19: - build with rpm optflags - install man pages - fix leak in extends checking (bnc#523447) ==== kernel-source ==== Subpackages: kernel-default kernel-default-devel kernel-devel kernel-docs kernel-macros kernel-syms - usbhid: add ATEN CS962 to list of quirky devices (bsc#1007615). - commit f452d0b - KEYS: Fix short sprintf buffer in /proc/keys show function (bsc#1004517, CVE-2016-7042). - commit 9d6b45c - Update patches.fixes/net-add-recursion-limit-to-GRO.patch mainline reference. - commit 3d61b80 ==== libX11 ==== Version update (1.6.3 -> 1.6.4) Subpackages: libX11-6 libX11-6-32bit libX11-data libX11-devel libX11-xcb1 libX11-xcb1-32bit - Update to version 1.6.4: + Move Compose \ o / to be with other emoji compose sequences + Replace Xmalloc+memset pairs with Xcalloc calls + Remove unused definition of XCONN_CHECK_FREQ + Bug 93184: read_EncodingInfo invalid free + Bug 93183: _XDefaultOpenIM memory leaks in out-of-memory error paths + Use strdup instead of Xmalloc+strcpy in _XDefaultOpenIM + XDefaultOMIF: replace strlen+Xmalloc+strcpy with strdup, code simplification + XlcDL.c: replace strcpy+strcat sequences with snprintf + XlcDL.c: reduce code duplication + lcPubWrap: replace malloc(strlen) + strcpy with strdup + Stop checking XTRANS_SECURE_RPC_FLAGS since we no longer use them + Stop checking for preferred order of local transports + Don't need to link libX11-xcb against libX11 + xcms: use size_t for strlen/sizeof values instead of converting to int & back + xcms: use unsigned indexes when looping through unsigned values + xcms: use size_t for pointer offsets passed to strncmp + omGeneric.c: Correct the parameter usage of sizeof + fix for Xlib 32-bit request number issues + Add Compose sequence for U+1F4A9. + Xlib.h: Fix macros imitating C functions. + Add compose file for pt_PT similar to pt_BR + Mark _XNextRequest as hidden + New compose keys for local languages in Togo + Fixup param specification for XChangeProperty() - Package changes: + Remove upstream patch U_fix_for_Xlib_32-bit_request_number_issues.patch ==== libXfixes ==== Version update (5.0.2 -> 5.0.3) Subpackages: libXfixes-devel libXfixes3 libXfixes3-32bit - Update to version 5.0.3: + fix Integer overflow on illegal server response ==== libXi ==== Version update (1.7.6 -> 1.7.8) Subpackages: libXi6 libXi6-32bit - Update to version 1.7.8: The changes of 1.7.7 are included. + Fix a crash introduced in the 1.7.7 release. + Properly validate server responses. ==== libXrender ==== Version update (0.9.9 -> 0.9.10) Subpackages: libXrender-devel libXrender1 libXrender1-32bit - Update to version 0.9.10: + Fix documentation to explicitly mention premultiplied alpha + Avoid OOB write in XRenderQueryFilters + Validate lengths while parsing server data. ==== libXtst ==== Version update (1.2.2 -> 1.2.3) - tagged baselibs.conf as source in specfile - Update to version 1.2.3: + Remove fallback for _XEatDataWords, require libX11 1.6 for it + Out of boundary access and endless loop in libXtst ==== libXv ==== Version update (1.0.10 -> 1.0.11) Subpackages: libXv-devel libXv1 libXv1-32bit - tagged baselibs.conf as source in specfile - Update to version 1.0.11: + Fix typo in dependencies for lint library + Protocol handling issues in libXv - CVE-2016-5407 ==== libXvMC ==== Version update (1.0.9 -> 1.0.10) - Update to version 1.0.10: + Avoid buffer underflow on empty strings. ==== libqt5-qtwebengine ==== - Add -fno-delete-null-pointer-checks to CXXFLAGS instead to really fix the gcc6 issues (boo#1003985) ==== myspell-dictionaries ==== Version update (20160511 -> 20161031) Subpackages: myspell-cs_CZ myspell-da_DK myspell-de myspell-de_DE myspell-el_GR myspell-en myspell-en_GB myspell-en_US myspell-es myspell-es_ES myspell-fr_FR myspell-hu_HU myspell-it_IT myspell-lightproof-en myspell-lightproof-hu_HU myspell-lightproof-pt_BR myspell-lightproof-ru_RU myspell-pl_PL myspell-pt_BR myspell-ru_RU - Update to git state 20161031: * Various language updates * Notably Swedish and pt_PT ==== osc ==== - Install bash completion in the debian package ==== php5 ==== Subpackages: apache2-mod_php5 php5-bcmath php5-bz2 php5-calendar php5-ctype php5-curl php5-dba php5-devel php5-dom php5-exif php5-fastcgi php5-ftp php5-gd php5-gettext php5-gmp php5-iconv php5-imap php5-json php5-ldap php5-mbstring php5-mcrypt php5-mysql php5-odbc php5-openssl php5-pdo php5-pear php5-pear-Archive_Tar php5-pgsql php5-shmop php5-snmp php5-sockets php5-sqlite php5-suhosin php5-sysvsem php5-sysvshm php5-tidy php5-tokenizer php5-wddx php5-xmlreader php5-xmlwriter php5-xsl php5-zip php5-zlib - adjust firebird dependency ==== quagga ==== - Implement shared library policy - Check for user/group before adding them to the system - Trim description ==== timezone ==== Version update (2016h -> 2016i) - timezone update 2016i: * Pacific/Tongatapu begins DST on 2016-11-06 at 02:00, ending on 2017-01-15 at 03:00. [bsc#1007725] * Northern Cyprus is now +03 year round, causing a split in Cyprus time zones starting 2016-10-30 at 04:00. This creates a zone Asia/Famagusta [bsc#1007726] * Antarctica/Casey switched from +08 to +11 on 2016-10-22 * Corrections to pre-1975 timestamps in Italy ==== timezone-java ==== Version update (2016h -> 2016i) - timezone update 2016i: * Pacific/Tongatapu begins DST on 2016-11-06 at 02:00, ending on 2017-01-15 at 03:00. [bsc#1007725] * Northern Cyprus is now +03 year round, causing a split in Cyprus time zones starting 2016-10-30 at 04:00. This creates a zone Asia/Famagusta [bsc#1007726] * Antarctica/Casey switched from +08 to +11 on 2016-10-22 * Corrections to pre-1975 timestamps in Italy ==== xf86-video-ati ==== - U_01-dri3-Return-NULL-from-radeon_dri3_pixmap_from_fd-if-calloc-fails.patch U_02-Add-support-for-async-flips-to-radeon_do_pageflip.patch U_03-present-Support-async-flips.patch U_04-Enable-DRI3-by-default-when-building-for-Xorg-1.18.3.patch U_05-EXA-6xx-7xx-fast-solid-pixmap-support.patch U_06-EXA-6xx-7xx-accelerate-PictOpOver-with-component-alpha.patch U_07-Adapt-to-XF86_CRTC_VERSION-7.patch U_08-Add-explicit-RADEON_DRM_QUEUE_ERROR-define.patch U_09-Don-t-enable-DRI3-by-default-with-EXA.patch U_10-Use-EventCallback-to-avoid-flushing-every-time-in-the-FlushCallback.patch U_11-Keep-track-of-damage-event-related-flushes-per-client-v2.patch U_12-Use-drmmode_crtc_scanout_-helpers-for-RandR-1.4-scanout-pixmaps.patch U_13-Handle-RandR-1.4-slave-dirty-updates-via-radeon_drm_queue.patch U_14-Track-damage-accurately-for-RandR-1.4-slave-scanout.patch U_15-Fix-build-against-xserver-1.13.patch U_16-Only-copy-from-screen-pixmap-to-shared-pixmap-on-demand-for-slave-scanout.patch U_17-Factor-out-transform_region-helper.patch U_18-Move-up-radeon_scanout_extents_intersect.patch U_19-Synchronize-scanout-pixmaps-for-TearFree.patch U_20-Make-TearFree-effective-with-PRIME-slave-scanout.patch Include patches that haven't made it into the 7.7.1 release. This means almost all commits between xf86-video-ati-7.7.0 and 12d30eeb9711bd2b1609d6bbb74c4a1760596f72. Fixes (bsc#990066). ==== yakuake ==== Subpackages: yakuake-lang - We need at least KF 5.15.0 -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 1

[opensuse-factory] Re: [Solved] No KDE sleep/hibernate modes anymore
by Bjoern Voigt 06 Nov '16

06 Nov '16

> On Mon, 2016-10-31 at 13:55 +0100, Bjoern Voigt wrote: >> Since one of the latest snapshots my KDE menu does not show the sleep >> modes (hibernate - suspend to disk; suspend to RAM) anymore. >> >> "systemctl hibernate" on the command line still works >> >> Maybe, this is related to this patch? This problem resolved automatically with the update from today. All KDE power menu entries are back. I don't know the reasons. Greetings, Björn -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 2

[opensuse-factory] /etc/resolv.conf + NetworkManager upgrade bug still present
by S. 06 Nov '16

06 Nov '16

Hi, I updated a Tumbleweed system today that wasn't updated since before the /etc/resolv.conf + NetworkManager bug. I was surprised that the bug hit me after the upgrade; no Internet access and I had to delete /etc/resolv.conf and restart NetworkManager. Wasn't this ever fixed? Or is it an unavoidable upgrade hassle? -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] New Tumbleweed snapshot 20161104 released!
by Dominique Leuenberger 06 Nov '16

06 Nov '16

Please note that this mail was generated by a script. The described changes are computed based on the x86_64 DVD. The full online repo contains too many changes to be listed here. Please check the known defects of this snapshot before upgrading: https://openqa.opensuse.org/tests/overview?distri=opensuse&groupid=1&versio… When you reply to report some issues, make sure to change the subject. It is not helpful to keep the release announcement subject in a thread while discussing a specific problem. Packages changed: ModemManager NetworkManager-applet (1.4.0 -> 1.4.2) SDL2 (2.0.4 -> 2.0.5) augeas (1.5.0 -> 1.6.0) bind bluedevil5 (5.8.2 -> 5.8.3) breeze (5.8.2 -> 5.8.3) breeze-gtk (5.8.2 -> 5.8.3) breeze4-style (5.8.2 -> 5.8.3) coreutils corosync (2.3.5 -> 2.4.1) curl (7.50.3 -> 7.51.0) diffutils (3.3 -> 3.5) ffmpeg (3.1.5 -> 3.2) ffmpeg2 grep (2.25 -> 2.26) grub2 gstreamer-plugins-good gtk3 (3.22.1 -> 3.22.2) jasper kactivitymanagerd (5.8.2 -> 5.8.3) kcm_sddm (5.8.2 -> 5.8.3) kde-cli-tools5 (5.8.2 -> 5.8.3) kde-gtk-config5 (5.8.2 -> 5.8.3) kde-user-manager (5.8.2 -> 5.8.3) kernel-source (4.8.4 -> 4.8.6) kgamma5 (5.8.2 -> 5.8.3) khotkeys5 (5.8.2 -> 5.8.3) kinfocenter5 (5.8.2 -> 5.8.3) kmenuedit5 (5.8.2 -> 5.8.3) kscreen5 (5.8.2 -> 5.8.3) kscreenlocker (5.8.2 -> 5.8.3) ksshaskpass5 (5.8.2 -> 5.8.3) ksysguard5 (5.8.2 -> 5.8.3) kwin5 (5.8.2 -> 5.8.3) ldb (1.1.26 -> 1.1.27) libcares2 (1.11.0 -> 1.12.0) libkdecoration2 (5.8.2 -> 5.8.3) libkscreen2 (5.8.2 -> 5.8.3) libksysguard5 (5.8.2 -> 5.8.3) libnettle (3.2 -> 3.3) libusb-1_0 (1.0.20 -> 1.0.21) libyui-qt-pkg (2.45.10 -> 2.45.11) linux-atm mercurial (3.9.1 -> 4.0) milou5 (5.8.2 -> 5.8.3) mutter nano (2.7.0 -> 2.7.1) ncurses net-tools oxygen5 (5.8.2 -> 5.8.3) perl-DBD-ODBC (1.52 -> 1.56) perl-Params-Validate (1.25 -> 1.26) plasma-framework plasma-nm5 (5.8.2 -> 5.8.3) plasma5-addons (5.8.2 -> 5.8.3) plasma5-desktop (5.8.2 -> 5.8.3) plasma5-integration (5.8.2 -> 5.8.3) plasma5-openSUSE plasma5-pa (5.8.2 -> 5.8.3) plasma5-session (5.8.2 -> 5.8.3) plasma5-workspace (5.8.2 -> 5.8.3) polkit-kde-agent-5 (5.8.2 -> 5.8.3) powerdevil5 (5.8.2 -> 5.8.3) ppp python-pyparsing (2.0.7 -> 2.1.10) python3-setuptools (28.6.1 -> 28.7.1) rpm rubygem-fast_gettext (1.2.0 -> 1.3.0) samba (4.4.5 -> 4.5.0) shadow skanlite (2.0 -> 2.0.1) sudo (1.8.18 -> 1.8.18p1) systemsettings5 (5.8.2 -> 5.8.3) talloc (2.1.6 -> 2.1.8) tdb (1.3.8 -> 1.3.11) tevent (0.9.28 -> 0.9.29) yast2-bootloader (3.2.4 -> 3.2.6) yast2-installation (3.2.5 -> 3.2.6) yast2-kdump (3.1.42 -> 3.2.0) yast2-network (3.2.8 -> 3.2.9) === Details === ==== ModemManager ==== Subpackages: ModemManager-bash-completion ModemManager-devel libmm-glib0 typelib-1_0-ModemManager-1_0 - Drop obsolete automake BuildRequires: Leftover from past patches. ==== NetworkManager-applet ==== Version update (1.4.0 -> 1.4.2) Subpackages: NetworkManager-connection-editor libnm-gtk-data libnm-gtk0 libnma-data libnma0 typelib-1_0-NMGtk-1_0 - Change the summary to something less GNOME-specific. - Don't install the ChangeLog file. - Replace the following BuildRequires for their pkgconfig equivalent: gobject-introspection-devel, gtk3-devel and libnotify-devel for: pkgconfig(gobject-introspection-1.0), pkgconfig(gtk+-3.0), pkgconfig(libnotify). - Drop dbus-1-devel and dbus-1-glib-devel BuildRequires: We already have pkgconfig(dbusmenu-gtk3-0.4) that pulls in all the dbus devel packages. - Rename package to NetworkManager-applet aligning slightly more close to upstream name. - Provide/Obsolete old name NetworkManager-gnome. - Run spec-cleaner to modernise spec file. Following this, add pkgconfig BuildRequires. - Rename NetworkManager-gnome-no-firewalld.patch to network-manager-applet-no-firewalld.patch, align with new package name. - Drop nm-icons.nm-icons.tar.gz as source package and handling of it in spec, not needed anymore. - Stop using suse-update-desktop files for nm-applet.desktop file, no longer needed. - Stop passing --disable-migration to configure, no longer needed, nor regcognized. - Update to version 1.4.2: + Removed UI property that required gtk3 >= 3.16 + Added a workaround for broken strict matching with old Jansson versions. ==== SDL2 ==== Version update (2.0.4 -> 2.0.5) - Backported commit 5184186d4366 and fbf9b0e3589a as SDL2-ppc64-declaration-after-statement.patch to fix build on ppc64/ppc64le - Update to 2.0.5 General: * Implemented audio capture support for some platforms * Added SDL_DequeueAudio() to retrieve audio when buffer queuing is turned on for audio capture * Added events for dragging and dropping text * Added events for dragging and dropping multiple items * By default the click raising a window will not be delivered to the SDL application. You can set the hint SDL_HINT_MOUSE_FOCUS_CLICKTHROUGH to "1" to allow that click through to the window. * Saving a surface with an alpha channel as a BMP will use a newer BMP format that supports alpha information. You can set the hint SDL_HINT_BMP_SAVE_LEGACY_FORMAT to "1" to use the old format. * Added SDL_GetHintBoolean() to get the boolean value of a hint * Added SDL_RenderSetIntegerScale() to set whether to smoothly scale or use integral multiples of the viewport size when scaling the rendering output * Added SDL_CreateRGBSurfaceWithFormat() and SDL_CreateRGBSurfaceWithFormatFrom() to create an SDL surface with a specific pixel format * Added SDL_GetDisplayUsableBounds() which returns the area usable for windows. For example, on Mac OS X, this subtracts the area occupied by the menu bar and dock. * Added SDL_GetWindowBordersSize() which returns the size of the window's borders around the client area * Added a window event SDL_WINDOWEVENT_HIT_TEST when a window had a hit test that wasn't SDL_HITTEST_NORMAL (e.g. in the title bar or window frame) * Added SDL_SetWindowResizable() to change whether a window is resizable * Added SDL_SetWindowOpacity() and SDL_GetWindowOpacity() to affect the window transparency * Added SDL_SetWindowModalFor() to set a window as modal for another window * Added support for AUDIO_U16LSB and AUDIO_U16MSB to SDL_MixAudioFormat() * Fixed flipped images when reading back from target textures when using the OpenGL renderer * Fixed texture color modulation with SDL_BLENDMODE_NONE when using the OpenGL renderer * Fixed bug where the alpha value of colorkeys was ignored when blitting in some cases Linux: * Added support for the Fcitx IME * Added a window event SDL_WINDOWEVENT_TAKE_FOCUS when a window manager asks the SDL window whether it wants to take focus. * Refresh rates are now rounded instead of truncated, e.g. 59.94 Hz is rounded up to 60 Hz instead of 59. * Added initial support for touchscreens on Raspberry Pi ==== augeas ==== Version update (1.5.0 -> 1.6.0) Subpackages: augeas-lenses libaugeas0 - Version update to 1.6.0: * See the NEWS file for the details ==== bind ==== Subpackages: bind-chrootenv bind-doc bind-utils idnkit libbind9-140 libdns162 libidnkit1 libirs141 libisc160 libisccc140 libisccfg140 liblwres141 - Apply cve-2016-8864.patch to fix CVE-2016-8864 (bsc#1007829). ==== bluedevil5 ==== Version update (5.8.2 -> 5.8.3) - Update to 5.8.3 * New bugfix release * For more details please see: https://www.kde.org/announcements/plasma-5.8.3.php ==== breeze ==== Version update (5.8.2 -> 5.8.3) Subpackages: breeze5-cursors breeze5-decoration breeze5-style breeze5-wallpapers - Update to 5.8.3 * New bugfix release * For more details please see: https://www.kde.org/announcements/plasma-5.8.3.php ==== breeze-gtk ==== Version update (5.8.2 -> 5.8.3) Subpackages: gtk2-metatheme-breeze gtk3-metatheme-breeze metatheme-breeze-common - Update to 5.8.3 * New bugfix release * For more details please see: https://www.kde.org/announcements/plasma-5.8.3.php ==== breeze4-style ==== Version update (5.8.2 -> 5.8.3) - Update to 5.8.3 * New bugfix release * For more details please see: https://www.kde.org/announcements/plasma-5.8.3.php ==== coreutils ==== - coreutils-m5sum-sha-sum-fix-ignore-missing-with-00-checksums.patch: Add upstream patch to fix "md5sum --check --ignore-missing" which treated files with checksums starting with "00" as missing. ==== corosync ==== Version update (2.3.5 -> 2.4.1) - upgrade to corosync-2.4.1(bsc#1004967) added: corosync-start-stop-level.patch deleted: corosync-cts-api-error.patch modified: bnc#867767-add-version.patch, change version to 2.4.1 corosync-2.4.1: Low: totemsrp: Addition of the log. cts: Make it run with pacemaker-1.13+ Config: Flag config uidgid entries Spec: Qdevice require same version of corosync corosync-2.4.0: qdevice and qnet config: get_cluster_mcast_addr error is not fatal some typo fixes corosync-v2.3.6 CFG: Prevent CFG orignating messages during SYNC wd: fix setting of watchdog timeouts votequorum: Don't send multiple callbacks when nodes join cfgtool: Display nodeid as unsigned int quorum: Display node id as unsigned int. Check for fdatasync Fix detection of qb_log_thread_priority_set totempg: Fix memory leak cpg: Memory not unmapped in cpg_zcb_free cpg: Handle ipc error in cpg_zcb_alloc/free totemconfig: Explicitly pass IP version parser: Make config file parser more hierarchy logsys: fix TOTEM logging when corosync built out of tree wd: make watchdog device configurable schedwrk: Cleanup and make it work on PPC BE Reapply config defaults corosync.conf reload logconfig: Fix logging reload disabling logfiles - Default token timeout was 5000 ms in SLE 11 SP4, but is 1000 ms in SLE 12(bsc#1001164) Added: bsc#1001164-corosync.conf-example.patch - Fix: [s390]Upgrade from SP1-GM + HA to SP2-RC2 +: Failed to start Corosync Cluster engine(bsc#996230) - modify corosync.spec to remove "chkconfig --add" - remove corosync-devel and require lines from baselibs.conf ==== curl ==== Version update (7.50.3 -> 7.51.0) Subpackages: libcurl-devel libcurl4 - Update to 7.51.0 Changes: * nss: additional cipher suites are now accepted by CURLOPT_SSL_CIPHER_LIST * New option: CURLOPT_KEEP_SENDING_ON_ERROR Bugfixes: * CVE-2016-8615: cookie injection for other servers * CVE-2016-8616: case insensitive password comparison * CVE-2016-8617: OOB write via unchecked multiplication * CVE-2016-8618: double-free in curl_maprintf * CVE-2016-8619: double-free in krb5 code * CVE-2016-8620: glob parser write/read out of bounds * CVE-2016-8621: curl_getdate read out of bounds * CVE-2016-8622: URL unescape heap overflow via integer truncation * CVE-2016-8623: Use-after-free via shared cookies * CVE-2016-8624: invalid URL parsing with '#' * CVE-2016-8625: IDNA 2003 makes curl use wrong host * openssl: fix per-thread memory leak using 1.0.1 or 1.0.2 * http: accept "Transfer-Encoding: chunked" for HTTP/2 as well * LICENSE-MIXING.md: update with mbedTLS dual licensing * examples/imap-append: Set size of data to be uploaded * test2048: fix url * darwinssl: disable RC4 cipher-suite support * CURLOPT_PINNEDPUBLICKEY.3: fix the AVAILABILITY formatting * openssl: don?t call CRYTPO_cleanup_all_ex_data * libressl: fix version output * easy: Reset all statistical session info in curl_easy_reset * curl_global_cleanup.3: don't unload the lib with sub threads running * dist: add CurlSymbolHiding.cmake to the tarball * docs: Remove that --proto is just used for initial retrieval * configure: Fixed builds with libssh2 in a custom location * curl.1: --trace supports % for sending to stderr! * cookies: same domain handling changed to match browser behavior * formpost: trying to attach a directory no longer crashes * CURLOPT_DEBUGFUNCTION.3: fixed unused argument warning * formpost: avoid silent snprintf() truncation * ftp: fix Curl_ftpsendf * mprintf: return error on too many arguments * smb: properly check incoming packet boundaries * GIT-INFO: remove the Mac 10.1-specific details * resolve: add error message when resolving using SIGALRM * cmake: add nghttp2 support * dist: remove PDF and HTML converted docs from the releases * configure: disable poll() in macOS builds * vtls: only re-use session-ids using the same scheme * pipelining: skip to-be-closed connections when pipelining * win: fix Universal Windows Platform build * curl: do not set CURLOPT_SSLENGINE to DEFAULT automatically * maketgz: make it support "only" generating version info * Curl_socket_check: add extra check to avoid integer overflow * gopher: properly return error for poll failures * curl: set INTERLEAVEDATA too * polarssl: clear thread array at init * polarssl: fix unaligned SSL session-id lock * polarssl: reduce #ifdef madness with a macro * curl_multi_add_handle: set timeouts in closure handles * configure: set min version flags for builds on mac * INSTALL: converted to markdown => INSTALL.md * curl_multi_remove_handle: fix a double-free * multi: fix inifinte loop in curl_multi_cleanup() * nss: fix tight loop in non-blocking TLS handhsake over proxy * mk-ca-bundle: Change URL retrieval to HTTPS-only by default * mbedtls: stop using deprecated include file * docs: fix req->data in multi-uv example * configure: Fix test syntax for monotonic clock_gettime * CURLMOPT_MAX_PIPELINE_LENGTH.3: Clarify it's not for HTTP/2 - Refresh libcurl-ocloexec.patch ==== diffutils ==== Version update (3.3 -> 3.5) - gnulib-diffseq.patch, big-file-performance.patch: Avoid performance regression on big files (bsc#1004991) - Diffutils 3.5: * diff3 no longer malfunctions due to use-after-free [bug introduced in 3.4] * diff --color no longer colorizes when TERM=dumb - Update to version 3.4 * diff accepts two new options --color and --palette to generate and configure colored output. --color takes an optional argument specifying when to colorize a line: --color=always, - -color=auto, --color=never. --palette is used to configure which colors are used. * many bugfixes - New -lang subpackage - Drop no longer needed gnulib-perl522.patch ==== ffmpeg ==== Version update (3.1.5 -> 3.2) Subpackages: libavcodec57 libavformat57 libavutil55 libswresample2 libswscale4 - Update to new upstream release 3.2 * SDL2 output device and ffplay support * SDL1 output device and SDL1 support removed * New: libopenmpt demuxer, fifo muxer, True Audio (TTA) muxer * New filters: weave, gblur, avgblur, sobel, prewitt, vaguedenoiser, yuvtestsrc, lut2, hysteresis, maskedclamp, crystalizer, acrusher, bitplanenoise, sidedata, asidedata * Non-Local Means (nlmeans) denoising filter * 16-bit support in curves filter and selectivecolor filter * Added threads option per filter instance * The "curves" filter does not automatically insert points at x=0 and x=1 anymore * Matroska muxer now writes CRC32 elements by default in all Level 1 elements * New "tee" protocol * VP8 in Ogg muxing * Floating point support in ALS decoder * Extended mov edit list support * Changed mapping of RTP MIME type G726 to codec g726le. - Drop ffmpeg-fix-CONFIG_VC1DSP-changes.patch (no longer needed) - Enable libfdk_aac if it is available at buildtime ==== ffmpeg2 ==== Subpackages: libavcodec56 libavformat56 libavutil54 libswresample1 libswscale3 - Enable libfdk_aac if it is available at buildtime ==== grep ==== Version update (2.25 -> 2.26) - grep 2.26: * no longer omit output merely because it follows an output line suppressed due to encoding errors * In the Shift_JIS locale, no longer mistakenly match in the middle of a multibyte character * grep can be much faster now when standard output is /dev/null. * grep -F is now typically much faster when many patterns are given, as it now uses the Aho-Corasick algorithm instead of the Commentz-Walter algorithm in that case. * grep -iF is typically much faster in a multibyte locale, if the pattern and its case counterparts contain only single byte characters. * grep with complicated expressions (e.g., back-references) and without -i now uses the regex fastmap for better performance. * In multibyte locales, grep now handles leading "." in patterns more efficiently. * grep now prints a "FILENAME:LINENO: " prefix when diagnosing an invalid regular expression that was read from an '-f'-specified file. ==== grub2 ==== Subpackages: grub2-i386-pc grub2-snapper-plugin grub2-systemd-sleep-plugin grub2-x86_64-efi grub2-x86_64-xen - Fix new line character in distributor (bsc#1007212) * modified grub2-default-distributor.patch ==== gstreamer-plugins-good ==== Subpackages: gstreamer-plugins-good-extra - Add gstreamer-plugins-good-wavparse.patch: Don't try to add srcpad if we don't know valid caps yet. Otherwise we'll run into an assertion on specially crafted files (bgo#773643, boo#1007595). ==== gtk3 ==== Version update (3.22.1 -> 3.22.2) Subpackages: gtk3-data gtk3-immodule-amharic gtk3-immodule-inuktitut gtk3-immodule-thai gtk3-immodule-vietnamese gtk3-immodule-xim gtk3-tools libgtk-3-0 typelib-1_0-Gtk-3_0 - Add gtk3-startupfix-wayland.patch: Fix slow startup notification for some gtk3 apps when running on wayland (bgo#768531). - Update to version 3.22.2: + Several improvements to the win32 theme. + Deprecations have been added for APIs that will be removed in GTK+ 4. + Bugs fixed: bgo#767713, bgo#771320, bgo#772345, bgo#772389, bgo#772415, bgo#772552, bgo#772683, bgo#772695, bgo#772775, bgo#772859, bgo#772922, bgo#772926, bgo#773029, bgo#773082, bgo#773113, bgo#773180, bgo#773246. + Updated translations. ==== jasper ==== Subpackages: libjasper-devel libjasper1 libjasper1-32bit - Update summaries. Use %_smp_mflags for parallel build. ==== kactivitymanagerd ==== Version update (5.8.2 -> 5.8.3) - Update to 5.8.3 * New bugfix release * For more details please see: https://www.kde.org/announcements/plasma-5.8.3.php ==== kcm_sddm ==== Version update (5.8.2 -> 5.8.3) - Update to 5.8.3 * New bugfix release * For more details please see: https://www.kde.org/announcements/plasma-5.8.3.php ==== kde-cli-tools5 ==== Version update (5.8.2 -> 5.8.3) - Update to 5.8.3 * New bugfix release * For more details please see: https://www.kde.org/announcements/plasma-5.8.3.php ==== kde-gtk-config5 ==== Version update (5.8.2 -> 5.8.3) - Update to 5.8.3 * New bugfix release * For more details please see: https://www.kde.org/announcements/plasma-5.8.3.php ==== kde-user-manager ==== Version update (5.8.2 -> 5.8.3) - Update to 5.8.3 * New bugfix release * For more details please see: https://www.kde.org/announcements/plasma-5.8.3.php - Remove upstream patches: * do-not-request-root-password-when-changing-avatar.diff ==== kernel-source ==== Version update (4.8.4 -> 4.8.6) Subpackages: kernel-default kernel-default-devel kernel-devel kernel-docs kernel-macros kernel-syms - x86/smpboot: Init apic mapping before usage (bnc#1006417). - commit 7d70b08 - Linux 4.8.6 (: :). - commit dbb68be - btrfs: fix races on root_log_ctx lists (bsc#1007653). - commit 1e904fd - Linux 4.8.5 (: :). - commit 9148e7c - drm/radeon: Hide the HW cursor while it's out of bounds (bsc#1000433). - drm/radeon: Also call cursor_move_locked when the cursor size changes (bsc#1000433). - drm/radeon: Always store CRTC relative radeon_crtc->cursor_x/y values (bsc#1000433). - commit 30e023d - ALSA: seq: Fix time account regression (boo#1006825). - commit 9168b92 - drm/fb-helper: Don't call dirty callback for untouched clips (boo#1003298). - commit 092ed80 ==== kgamma5 ==== Version update (5.8.2 -> 5.8.3) - Update to 5.8.3 * New bugfix release * For more details please see: https://www.kde.org/announcements/plasma-5.8.3.php ==== khotkeys5 ==== Version update (5.8.2 -> 5.8.3) Subpackages: khotkeys5-devel - Update to 5.8.3 * New bugfix release * For more details please see: https://www.kde.org/announcements/plasma-5.8.3.php ==== kinfocenter5 ==== Version update (5.8.2 -> 5.8.3) - Update to 5.8.3 * New bugfix release * For more details please see: https://www.kde.org/announcements/plasma-5.8.3.php ==== kmenuedit5 ==== Version update (5.8.2 -> 5.8.3) - Update to 5.8.3 * New bugfix release * For more details please see: https://www.kde.org/announcements/plasma-5.8.3.php ==== kscreen5 ==== Version update (5.8.2 -> 5.8.3) - Update to 5.8.3 * New bugfix release * For more details please see: https://www.kde.org/announcements/plasma-5.8.3.php ==== kscreenlocker ==== Version update (5.8.2 -> 5.8.3) Subpackages: libKScreenLocker5 - Update to 5.8.3 * New bugfix release * For more details please see: https://www.kde.org/announcements/plasma-5.8.3.php ==== ksshaskpass5 ==== Version update (5.8.2 -> 5.8.3) - Update to 5.8.3 * New bugfix release * For more details please see: https://www.kde.org/announcements/plasma-5.8.3.php ==== ksysguard5 ==== Version update (5.8.2 -> 5.8.3) - Update to 5.8.3 * New bugfix release * For more details please see: https://www.kde.org/announcements/plasma-5.8.3.php ==== kwin5 ==== Version update (5.8.2 -> 5.8.3) Subpackages: kwin5-devel - Update to 5.8.3 * New bugfix release * For more details please see: https://www.kde.org/announcements/plasma-5.8.3.php - Remove upstream patches: * 0001-platformx-x11-Add-a-freeze-protection-against-OpenGL.patch * 0002-platformx-x11-Add-a-freeze-protection-against-OpenGL.patch * 0003-Remove-most-overhead-caused-by-the-freeze-detection-.patch * 0004-Do-a-count-down-of-framesToTestForSafety.patch * 0005-Use-only-one-timer-to-detect-freezes-and-other-optim.patch * 0006-Test-3-frames-for-freezes-by-default.patch * 0007-Only-call-PostLastGuardedFrame-when-OpenGLCompositin.patch ==== ldb ==== Version update (1.1.26 -> 1.1.27) Subpackages: libldb1 libldb1-32bit - Update to 1.1.27 + performance improvements + VLV control improvements ==== libcares2 ==== Version update (1.11.0 -> 1.12.0) - Version update to 1.12.0: * Fixes bsc#1007728 CVE-2016-5180 * api: add ARES_OPT_NOROTATE optmask value * Collection of bugfixes ==== libkdecoration2 ==== Version update (5.8.2 -> 5.8.3) Subpackages: libkdecoration2-devel libkdecorations2-5 libkdecorations2private5 - Update to 5.8.3 * New bugfix release * For more details please see: https://www.kde.org/announcements/plasma-5.8.3.php ==== libkscreen2 ==== Version update (5.8.2 -> 5.8.3) Subpackages: libKF5Screen7 libkscreen2-devel libkscreen2-plugin - Update to 5.8.3 * New bugfix release * For more details please see: https://www.kde.org/announcements/plasma-5.8.3.php ==== libksysguard5 ==== Version update (5.8.2 -> 5.8.3) Subpackages: libksysguard5-devel libksysguard5-helper - Update to 5.8.3 * New bugfix release * For more details please see: https://www.kde.org/announcements/plasma-5.8.3.php ==== libnettle ==== Version update (3.2 -> 3.3) Subpackages: libhogweed4 libhogweed4-32bit libnettle-devel libnettle6 libnettle6-32bit - libnettle 3.3: * Invalid private RSA keys, with an even modulo, are now rejected by rsa_private_key_prepare. (Earlier versions allowed such keys, even if results of using them were bogus). Nettle applications are required to call rsa_private_key_prepare and check the return value, before using any other RSA private key functions; failing to do so may result in crashes for invalid private keys. * Ignore bit 255 of the x coordinate of the input point to curve25519_mul, as required by RFC 7748. To differentiate at compile time, curve25519.h defines the constant NETTLE_CURVE25519_RFC7748. * RSA and DSA now use side-channel silent modular exponentiation, to defend against attacks on the private key from evil processes sharing the same processor cache. This attack scenario is of particular relevance when running an HTTPS server on a virtual machine, where you don't know who you share the cache hardware with. bsc#991464 CVE-2016-6489 * Fix sexp-conv crashes on invalid input * Fix out-of-bounds read in des_weak_p * Fix a couple of formally undefined shift operations * Fix compilation with c89 * New function memeql_sec, for side-channel silent comparison of two memory areas. * Building the public key support of nettle now requires GMP version 5.0 or later (unless --enable-mini-gmp is used). ==== libusb-1_0 ==== Version update (1.0.20 -> 1.0.21) Subpackages: libusb-1_0-0 libusb-1_0-0-32bit libusb-1_0-devel - Update to version 1.0.21 * Core: Refactor code related to transfer flags and timeout handling * Darwin: Ignore root hub simulation devices * Darwin: Improved support for OS X El Capitan * Darwin: Work around devices with buggy endpoint descriptors * Darwin: Do not use objc_registerThreadWithCollector after its deprecation * Darwin: Use C11 atomics on 10.12+ as the OS atomics are now deprecated * Linux: Support preallocating kernel memory for zerocopy USB * Linux: Deal with receiving POLLERR before all transfers have completed * Solaris: Add solaris backend * Windows: Add Visual Studio 2015 support * Windows: Add usbdk backend * Prevent attempts to recursively handle events * Fix race condition in handle_timeout() * Allow transferred argument to be optional in bulk APIs * Various other bug fixes and improvements - Fix source url ==== libyui-qt-pkg ==== Version update (2.45.10 -> 2.45.11) - avoid duplicate entries in package groups view (bnc#852073) - 2.45.11 ==== linux-atm ==== - linux-atm-2.5.2-fix-header-conflict.patch: avoid conflict with kernel headers ==== mercurial ==== Version update (3.9.1 -> 4.0) Subpackages: mercurial-lang - Mercurial 4.0 This is a regularly-scheduled quarterly feature release. Unlike other 4.0 software releases, this is simply 3.9 + .1, so it should be the usual pain-free upgrade. + Features * The following commands now also have experimental formatter support: 'hg version', 'hg grep' and 'hg config' * New template keywords and functions: `termwidth`, `mod(a, b)`, `relpath(path)` * Basic arithmetic operations in template such as `termwidth - 10` * `follow()` revset takes new `startrev` parameter * Bash completion now allows skipping potentially expensive status call for completing 'hg status' arguments, using $HGCOMPLETE_NOSTATUS environment variable + Improvements * A number of changes were made to move and copy tracking, to make sure move and copy information is not lost during commands like 'hg graft' * Compound revset expression is now properly ordered * Python 3 support has received a lot of improvements (but will take a lot of additional work) * zlib performance in hgweb is improved, and it's possible to control zlib compression level using server.zliblevel option - Refreshed mercurial-hgk-path-fix.diff and mercurial-locale-path-fix.patch ==== milou5 ==== Version update (5.8.2 -> 5.8.3) - Update to 5.8.3 * New bugfix release * For more details please see: https://www.kde.org/announcements/plasma-5.8.3.php ==== mutter ==== Subpackages: libmutter0 mutter-data - Add mutter-fix-startup.patch: Fix slow startup notification for some gtk3 apps when running on wayland (bgo#768531). ==== nano ==== Version update (2.7.0 -> 2.7.1) Subpackages: nano-lang - GNU nano 2.7.1: * add ability to display line numbers * fix some bugs with scrolling in softwrap mode * stricter parsing of key rebindungs * marks a new buffer as modified when the output of a command (^R ^X) has been read into it ==== ncurses ==== Subpackages: libncurses5 libncurses6 libncurses6-32bit ncurses-devel ncurses-utils tack terminfo terminfo-base - Drop patch ncurses-5.9-environment.dif as YaST2 ncurses GUI does not need it anymore and as well as it causes bug bsc#1000662 - Add ncurses patch 20161022 + modify tset -w (and tput reset) to update the program's copy of the screensize if it was already set in the system, to improve tabstop setting which relies upon knowing the actual screensize. + add functionality of tset -w to tput, like the "-c" feature this is not optional in tput. + add "clear" as a possible link/alias to tput. + improve tput's check for being called as "init" or "reset" to allow for transformed names. + split-out the "clear" function from progs/clear.c, share with tput to get the same behavior, e.g., the E3 extension. - Add ncurses patch 20161015 + amend internal use of tputs to consistently use the number of lines affected, e.g., for insert/delete character operations. While merging terminfo source early in 1995, several descriptions used the "*" proportional delay for these operations, prompting a change in doupdate. + regenerate llib-* files. + regenerate HTML manpages. + fix several formatting issues with manual pages. - Add ncurses patch 20161008 + adjust size in infocmp/tic to work with strlcpy. + fix configure script to record when strlcat is found on OpenBSD. + build-fix for "recent" OpenBSD vs baudrate. ==== net-tools ==== Subpackages: net-tools-deprecated - net-tools-1.60-fix-header-conflict.patch: use kernel headers to avoid conflict with user-space headers ==== oxygen5 ==== Version update (5.8.2 -> 5.8.3) Subpackages: oxygen5-cursors oxygen5-decoration oxygen5-devel oxygen5-lang oxygen5-sounds oxygen5-style - Update to 5.8.3 * New bugfix release * For more details please see: https://www.kde.org/announcements/plasma-5.8.3.php ==== perl-DBD-ODBC ==== Version update (1.52 -> 1.56) - updated to 1.56 see /usr/share/doc/packages/perl-DBD-ODBC/Changes 1.56 2016-10-06 Full release of the 1.53 development series One version skipped because of indexing problems. 1.53_2 2016-02-03 [MISCELLANEOUS] Add new FAQs 1.53_1 2015-10-16 [BUG FIXES] Strictly speaking this is a bug fix to DBI and not DBD::ODBC but DBI now supports 64 bit row counts where an IV in perl is 64 bits. However, it necessitated changes to DBD::ODBC to pick up the fix. odbc_rows (my workaround since 2012) is still supported but should no longer be required so long as you use this DBD::ODBC and DBI 1.633_92 or above. [INTERNALS] Removed dbd_st_rows and now setting DBIc_ROW_COUNT. [DOCUMENTATION] Add tables and table_info section to deviations from the DBI spec. [MISCELLANEOUS] Change column name in t/rt_101579.t as "method" is a reserved word in. Teradata Thanks to Zhenyi Zhou. Remove duplicate dynamic_config from META.yml. ==== perl-Params-Validate ==== Version update (1.25 -> 1.26) - updated to 1.26 see /usr/share/doc/packages/perl-Params-Validate/Changes 1.26 2016-10-06 - Reverted to Module::Build. The use of EUMM in 1.25 broke Windows builds. ==== plasma-framework ==== Subpackages: plasma-framework-components plasma-framework-devel plasma-framework-private - Add 0001-make-sure-OSD-doesnt-have-Dialog-flag.patch to fix an issue by which OSD (like volume changes notifications) were not shown when panel was hidden (kde#370433). ==== plasma-nm5 ==== Version update (5.8.2 -> 5.8.3) Subpackages: plasma-nm5-openconnect plasma-nm5-openvpn plasma-nm5-pptp plasma-nm5-vpnc - Update to 5.8.3 * New bugfix release * For more details please see: https://www.kde.org/announcements/plasma-5.8.3.php ==== plasma5-addons ==== Version update (5.8.2 -> 5.8.3) - Update to 5.8.3 * New bugfix release * For more details please see: https://www.kde.org/announcements/plasma-5.8.3.php ==== plasma5-desktop ==== Version update (5.8.2 -> 5.8.3) - Update to 5.8.3 * New bugfix release * For more details please see: https://www.kde.org/announcements/plasma-5.8.3.php ==== plasma5-integration ==== Version update (5.8.2 -> 5.8.3) - Update to 5.8.3 * New bugfix release * For more details please see: https://www.kde.org/announcements/plasma-5.8.3.php ==== plasma5-openSUSE ==== Subpackages: plasma5-defaults-openSUSE plasma5-theme-openSUSE plasma5-workspace-branding-openSUSE sddm-theme-openSUSE - Update to 5.8.3 * New bugfix release * For more details please see: https://www.kde.org/announcements/plasma-5.8.3.php - Remove git URL for now ==== plasma5-pa ==== Version update (5.8.2 -> 5.8.3) - Update to 5.8.3 * New bugfix release * For more details please see: https://www.kde.org/announcements/plasma-5.8.3.php ==== plasma5-session ==== Version update (5.8.2 -> 5.8.3) - Update to 5.8.3 * New bugfix release * For more details please see: https://www.kde.org/announcements/plasma-5.8.3.php ==== plasma5-workspace ==== Version update (5.8.2 -> 5.8.3) Subpackages: drkonqi5 plasma5-workspace-devel plasma5-workspace-libs - Call qtpaths with an absolute path in startkde to make sure the system one is used (boo#1004769) - Add use-nearest-aspect-ratio-available-wallpaper.diff to improve the selection of wallpapers keeping the same (or as similar as possible) aspect ratio (boo#990257). Include the latest changes submitted upstream to work better with QUAD HD screen resolutions. - Update to 5.8.3 * New bugfix release * For more details please see: https://www.kde.org/announcements/plasma-5.8.3.php - Remove upstream patches: * fix-sddm-theme-logic.diff * remove-sddm-graphicaleffects-dep.patch ==== polkit-kde-agent-5 ==== Version update (5.8.2 -> 5.8.3) - Update to 5.8.3 * New bugfix release * For more details please see: https://www.kde.org/announcements/plasma-5.8.3.php ==== powerdevil5 ==== Version update (5.8.2 -> 5.8.3) - Update to 5.8.3 * New bugfix release * For more details please see: https://www.kde.org/announcements/plasma-5.8.3.php ==== ppp ==== - fix-header-conflict.patch: avoid conflict with kernel headers ==== python-pyparsing ==== Version update (2.0.7 -> 2.1.10) - update to version 2.1.10: * Fixed bug in reporting named parse results for ZeroOrMore expressions, thanks Ethan Nash for reporting this! * Fixed behavior of LineStart to be much more predictable. LineStart can now be used to detect if the next parse position is col 1, factoring in potential leading whitespace (which would cause LineStart to fail). Also fixed a bug in col, which is used in LineStart, where '\n's were erroneously considered to be column 1. * Added support for multiline test strings in runTests. * Fixed bug in ParseResults.dump when keys were not strings. Also changed display of string values to show them in quotes, to help distinguish parsed numeric strings from parsed integers that have been converted to Python ints. - update to version 2.1.9: * Added class CloseMatch, a variation on Literal which matches "close" matches, that is, strings with at most 'n' mismatching characters. * Fixed bug in Keyword.setDefaultKeywordChars(), reported by Kobayashi Shinji - nice catch, thanks! * Minor API change in pyparsing_common. Renamed some of the common expressions to PEP8 format (to be consistent with the other pyparsing_common expressions): + signedInteger -> signed_integer + sciReal -> sci_real Also, in trying to stem the API bloat of pyparsing, I've copied some of the global expressions and helper parse actions into pyparsing_common, with the originals to be deprecated and removed in a future release: + commaSeparatedList -> pyparsing_common.comma_separated_list + upcaseTokens -> pyparsing_common.upcaseTokens + downcaseTokens -> pyparsing_common.downcaseTokens * Fixed Python3 compatibility bug when using dict keys() and values() in ParseResults.getName(). * After some prodding, I've reworked the unitTests.py file for pyparsing over the past few releases. It uses some variations on unittest to handle my testing style. The test now: + auto-discovers its test classes (while maintining their order of definition) + suppresses voluminous 'print' output for tests that pass - update to version 2.1.8: * Fixed issue in the optimization to _trim_arity, when the full stacktrace is retrieved to determine if a TypeError is raised in pyparsing or in the caller's parse action. Code was traversing the full stacktrace, and potentially encountering UnicodeDecodeError. * Fixed bug in ParserElement.inlineLiteralsUsing, causing infinite loop with Suppress. * Fixed bug in Each, when merging named results from multiple expressions in a ZeroOrMore or OneOrMore. Also fixed bug when ZeroOrMore expressions were erroneously treated as required expressions in an Each expression. * Added a few more inline doc examples. * Improved use of runTests in several example scripts. - changes from version 2.1.7: * Fixed regression reported by Andrea Censi (surfaced in PyContracts tests) when using ParseSyntaxExceptions (raised when using operator '-') with packrat parsing. * Minor fix to oneOf, to accept all iterables, not just space-delimited strings and lists. (If you have a list or set of strings, it is not necessary to concat them using ' '.join to pass them to oneOf, oneOf will accept the list or set or generator directly.) - changes from version 2.1.6 : * *Major packrat upgrade*, inspired by patch provided by Tal Einat - many, many, thanks to Tal for working on this! Tal's tests show faster parsing performance (2X in some tests), *and* memory reduction from 3GB down to ~100MB! Requires no changes to existing code using packratting. (Uses OrderedDict, available in Python 2.7 and later. For Python 2.6 users, will attempt to import from ordereddict backport. If not present, will implement pure-Python Fifo dict.) * Minor API change - to better distinguish between the flexible numeric types defined in pyparsing_common, I've changed "numeric" (which parsed numbers of different types and returned int for ints, float for floats, etc.) and "number" (which parsed numbers of int or float type, and returned all floats) to "number" and "fnumber" respectively. I hope the "f" prefix of "fnumber" will be a better indicator of its internal conversion of parsed values to floats, while the generic "number" is similar to the flexible number syntax in other languages. Also fixed a bug in pyparsing_common.numeric (now renamed to pyparsing_common.number), integers were parsed and returned as floats instead of being retained as ints. * Fixed bug in upcaseTokens and downcaseTokens introduced in 2.1.5, when the parse action was used in conjunction with results names. Reported by Steven Arcangeli from the dql project, thanks for your patience, Steven! * Major change to docs! After seeing some comments on reddit about general issue with docs of Python modules, and thinking that I'm a little overdue in doing some doc tuneup on pyparsing, I decided to following the suggestions of the redditor and add more inline examples to the pyparsing reference documentation. I hope this addition will clarify some of the more common questions people have, especially when first starting with pyparsing/Python. * Deprecated ParseResults.asXML. I've never been too happy with this method, and it usually forces some unnatural code in the parsers in order to get decent tag names. The amount of guesswork that asXML has to do to try to match names with values should have been a red flag from day one. If you are using asXML, you will need to implement your own ParseResults->XML serialization. Or consider migrating to a more current format such as JSON (which is very easy to do: results_as_json = json.dumps(parse_result.asDict()) Hopefully, when I remove this code in a future version, I'll also be able to simplify some of the craziness in ParseResults, which IIRC was only there to try to make asXML work. * Updated traceParseAction parse action decorator to show the repr of the input and output tokens, instead of the str format, since str has been simplified to just show the token list content. - update to version 2.1.5: * Added ParserElement.split() generator method, similar to re.split(). Includes optional arguments maxsplit (to limit the number of splits), and includeSeparators (to include the separating matched text in the returned output, default=False). * Added a new parse action construction helper tokenMap, which will apply a function and optional arguments to each element in a ParseResults. * Added more expressions to pyparsing_common: + IPv4 and IPv6 addresses (including long, short, and mixed forms of IPv6) + MAC address + ISO8601 date and date time strings (with named fields for year, month, etc.) + UUID (xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx) + hex integer (returned as int) + fraction (integer '/' integer, returned as float) + mixed integer (integer '-' fraction, or just fraction, returned as float) + stripHTMLTags (parse action to remove tags from HTML source) + parse action helpers convertToDate and convertToDatetime to do custom parse time conversions of parsed ISO8601 strings * runTests now returns a two-tuple: success if all tests succeed, and an output list of each test and its output lines. * Added failureTests argument (default=False) to runTests, so that tests can be run that are expected failures, and runTests' success value will return True only if all tests *fail* as expected. Also, parseAll now defaults to True. * New example numerics.py, shows samples of parsing integer and real numbers using locale-dependent formats - changes from version 2.1.4: * Split out the '==' behavior in ParserElement, now implemented as the ParserElement.matches() method. Using '==' for string test purposes will be removed in a future release. * Expanded capabilities of runTests(). Will now accept embedded comments (default is Python style, leading '#' character, but customizable). Comments will be emitted along with the tests and test output. Useful during test development, to create a test string consisting only of test case description comments separated by blank lines, and then fill in the test cases. Will also highlight ParseFatalExceptions with "(FATAL)". * Added a 'pyparsing_common' class containing common/helpful little expressions such as integer, float, identifier, etc. I used this class as a sort of embedded namespace, to contain these helpers without further adding to pyparsing's namespace bloat. * Minor enhancement to traceParseAction decorator, to retain the parse action's name for the trace output. * Added optional 'fatal' keyword arg to addCondition, to indicate that a condition failure should halt parsing immediately. - changes from version 2.1.3: * _trim_arity fix in 2.1.2 was very version-dependent on Py 3.5.0. Now works for Python 2.x, 3.3, 3.4, 3.5.0, and 3.5.1 (and hopefully beyond). - changes from version 2.1.2: * Fixed bug in _trim_arity when pyparsing code is included in a PyInstaller, reported by maluwa. * Fixed catastrophic regex backtracking in implementation of the quoted string expressions (dblQuotedString, sglQuotedString, and quotedString). Reported on the pyparsing wiki by webpentest, good catch! (Also tuned up some other expressions susceptible to the same backtracking problem, such as cStyleComment, cppStyleComment, etc.) - update to version 2.1.1: * Added support for assigning to ParseResults using slices. * Fixed bug in ParseResults.toDict(), in which dict values were always converted to dicts, even if they were just unkeyed lists of tokens. Reported on SO by Gerald Thibault, thanks Gerald! * Fixed bug in SkipTo when using failOn, reported by robyschek, thanks! * Fixed bug in Each introduced in 2.1.0, reported by AND patch and unit test submitted by robyschek, well done! * Removed use of functools.partial in replaceWith, as this creates an ambiguous signature for the generated parse action, which fails in PyPy. Reported by Evan Hubinger, thanks Evan! * Added default behavior to QuotedString to convert embedded '\t', '\n', etc. characters to their whitespace counterparts. Found during Q&A exchange on SO with Maxim. - update to version 2.1.0: * Modified the internal _trim_arity method to distinguish between TypeError's raised while trying to determine parse action arity and those raised within the parse action itself. This will clear up those confusing "<lambda>() takes exactly 1 argument (0 given)" error messages when there is an actual TypeError in the body of the parse action. Thanks to all who have raised this issue in the past, and most recently to Michael Cohen, who sent in a proposed patch, and got me to finally tackle this problem. * Added compatibility for pickle protocols 2-4 when pickling ParseResults. In Python 2.x, protocol 0 was the default, and protocol 2 did not work. In Python 3.x, protocol 3 is the default, so explicitly naming protocol 0 or 1 was required to pickle ParseResults. With this release, all protocols 0-4 are supported. Thanks for reporting this on StackOverflow, Arne Wolframm, and for providing a nice simple test case! * Added optional 'stopOn' argument to ZeroOrMore and OneOrMore, to simplify breaking on stop tokens that would match the repetition expression. It is a common problem to fail to look ahead when matching repetitive tokens if the sentinel at the end also matches the repetition expression, as when parsing "BEGIN aaa bbb ccc END" with: "BEGIN" + OneOrMore(Word(alphas)) + "END" Since "END" matches the repetition expression "Word(alphas)", it will never get parsed as the terminating sentinel. Up until now, this has to be resolved by the user inserting their own negative lookahead: "BEGIN" + OneOrMore(~Literal("END") + Word(alphas)) + "END" Using stopOn, they can more easily write: "BEGIN" + OneOrMore(Word(alphas), stopOn="END") + "END" The stopOn argument can be a literal string or a pyparsing expression. Inspired by a question by Lamakaha on StackOverflow (and many previous questions with the same negative-lookahead resolution). * Added expression names for many internal and builtin expressions, to reduce name and error message overhead during parsing. * Converted helper lambdas to functions to refactor and add docstring support. * Fixed ParseResults.asDict() to correctly convert nested ParseResults values to dicts. * Cleaned up some examples, fixed typo in fourFn.py identified by aristotle2600 on reddit. * Removed keepOriginalText helper method, which was deprecated ages ago. Superceded by originalTextFor. * Same for the Upcase class, which was long ago deprecated and replaced with the upcaseTokens method. ==== python3-setuptools ==== Version update (28.6.1 -> 28.7.1) - update to version 28.7.1: * #827: Update PyPI root for dependency links. * #833: Backed out changes from #830 as the implementation seems to have problems in some cases. - changes from version 28.7.0: * #832: Moved much of the namespace package handling functionality into a separate module for re-use in something like #789. * #830: sdist command no longer suppresses the inclusion of data files, re-aligning with the expectation of distutils and addressing #274 and #521. ==== rpm ==== Subpackages: rpm-32bit rpm-build rpm-devel - Correct summary/description of -lang subpackages ==== rubygem-fast_gettext ==== Version update (1.2.0 -> 1.3.0) - updated to version 1.3.0 see installed CHANGELOG ==== samba ==== Version update (4.4.5 -> 4.5.0) Subpackages: libdcerpc-binding0 libdcerpc-binding0-32bit libdcerpc0 libdcerpc0-32bit libndr-krb5pac0 libndr-krb5pac0-32bit libndr-nbt0 libndr-nbt0-32bit libndr-standard0 libndr-standard0-32bit libndr0 libndr0-32bit libnetapi0 libnetapi0-32bit libsamba-credentials0 libsamba-credentials0-32bit libsamba-errors0 libsamba-errors0-32bit libsamba-hostconfig0 libsamba-hostconfig0-32bit libsamba-passdb0 libsamba-passdb0-32bit libsamba-util0 libsamba-util0-32bit libsamdb0 libsamdb0-32bit libsmbclient-devel libsmbclient0 libsmbconf0 libsmbconf0-32bit libsmbldap0 libsmbldap0-32bit libtevent-util0 libtevent-util0-32bit libwbclient0 libwbclient0-32bit samba-client samba-client-32bit samba-doc samba-libs samba-libs-32bit samba-winbind samba-winbind-32bit - Include vfstest in samba-test; (bsc#1001203). - s3/winbindd: using default domain with user(a)domain.com format fails; (bsc#997833). - Fix segfault in libnss_wins; (bso#12277); (bso#12269); (bsc#995730). - Update to 4.5.0 + NTLM1 Authentication disabled by default + SMB2.1 leases enabled by default + Support for OFD locks + ctdb tool rewritten + Added shadow copy snapshot prefix parameter - Fix illegal memory access after memory has been deleted; (bso#11836); (bsc#975299). - Don't package man pages for VFS modules that aren't built; (boo#993707). - Fix population of ctdb sysconfig after source merge; (bsc#981566). - Enable vfs_ceph builds for Factory (x86-64) + Package as samba-ceph to avoid Ceph dependency in base package. ==== shadow ==== - add keyring, three public keys from https://pkg-shadow.alioth.debian.org/download.php ==== skanlite ==== Version update (2.0 -> 2.0.1) Subpackages: skanlite-lang - Fix source URL - Update to version 2.0.1: * added appdata-xml * updated documentation - Removed upstreamed patch fix_translations_install.patch ==== sudo ==== Version update (1.8.18 -> 1.8.18p1) - update to 1.8.18p1 with these major changes: * When sudo_noexec.so is used, the WRDE_NOCMD flag is now added if the wordexp() function is called. This prevents commands from being run via wordexp() without disabling it entirely. * On Linux systems, sudo_noexec.so now uses a seccomp filter to disable execute access if the kernel supports seccomp. This is more robust than the traditional method of using stub functions that return an error. ==== systemsettings5 ==== Version update (5.8.2 -> 5.8.3) Subpackages: systemsettings5-devel - Update to 5.8.3 * New bugfix release * For more details please see: https://www.kde.org/announcements/plasma-5.8.3.php ==== talloc ==== Version update (2.1.6 -> 2.1.8) Subpackages: libtalloc2 libtalloc2-32bit python-talloc python-talloc-32bit - Update to version 2.1.8. + performance improvements + Fix memory leak when destructors reparent children; (bso#11901). ==== tdb ==== Version update (1.3.8 -> 1.3.11) Subpackages: libtdb1 libtdb1-32bit - Update to version 1.3.11. + performance improvements + make pthread mutex code more portable + avoid a race condition when checking for robust mutexes (bso#11808) + Remove use of strcpy in tdb test. + eliminate deprecation warnings in python tests + Only set public headers field when installing as a public library. ==== tevent ==== Version update (0.9.28 -> 0.9.29) Subpackages: libtevent0 libtevent0-32bit - Update to version 0.9.29. + performance improvements. ==== yast2-bootloader ==== Version update (3.2.4 -> 3.2.6) - set pmbr flag only on GPT disks (bsc#1008092) - 3.2.6 - Use the system-wide locale (/etc/sysconfig/language:RC_LANG) when generating the GRUB2 menu (bsc#998152) - 3.2.5 ==== yast2-installation ==== Version update (3.2.5 -> 3.2.6) - Added support for read-only proposal modules (fate#321739) - 3.2.6 - Documentation for subvolumes in control.xml (fate#321737) ==== yast2-kdump ==== Version update (3.1.42 -> 3.2.0) - fix typos in kdump help (bsc#703145) - 3.2.0 ==== yast2-network ==== Version update (3.2.8 -> 3.2.9) - Make network summary consistent with other summaries (bsc#745940) - 3.2.9 -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] update 20161026 leaves tty's in multi-user mode w/o text displayed
by Patrick Shanahan 05 Nov '16

05 Nov '16

Just updated to 20161026, dropped to multi-user to clear replaced instances and have no text displayed in tty's. I can enter commands in tty's I know are open, but there is no text/char's displayed. Rebooting to multi-user has text displayed, but moving to graphical and then back to multi-user and no text displayed. In graphical target text is displayed in the tty's. nvidia gs450 w/nvidia 375.10 driver. -- (paka)Patrick Shanahan Plainfield, Indiana, USA @ptilopteri http://en.opensuse.org openSUSE Community Member facebook/ptilopteri http://wahoo.no-ip.org Photo Album: http://wahoo.no-ip.org/gallery2 Registered Linux User #207535 @ http://linuxcounter.net -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

3 6

[opensuse-factory] gstreamer playback working for anyone on Factory/Tumbleweed?
by Stefan Seyfried 05 Nov '16

05 Nov '16

Hi, as gstreamer with its combination of packman codecs and lots of packages is quite easy to get wrong, I'd like to ask here before opening a bugzilla entry: Can anyone play this on Tumbleweed with gst-launch-1.0 playbin \ uri=http://docs.gstreamer.com/media/sintel_trailer-480p.webm (gst-launch-1.0 is in gstreamer-utils package) I'm always getting... ERROR: from element /GstPlayBin:playbin0/GstURIDecodeBin:uridecodebin0/GstSoupHTTPSrc:source: Internal data flow error. Additional debug info: gstbasesrc.c(2948): gst_base_src_loop (): /GstPlayBin:playbin0/GstURIDecodeBin:uridecodebin0/GstSoupHTTPSrc:source: streaming task paused, reason not-negotiated (-4) ERROR: pipeline doesn't want to preroll. Setting pipeline to NULL ... Freeing pipeline ... It works on Leap 42.1 (different gstreamer version of course) I'm trying to use gstreamer in my own project, and was wondering what I'm doing wrong until I found that the simple demo commandline also does not work :-) Thanks, seife -- Stefan Seyfried "For a successful technology, reality must take precedence over public relations, for nature cannot be fooled." -- Richard Feynman -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

4 7

[opensuse-factory] RFC: switching perl-Wx from wxWidgets 2.8 to 3.0
by Stefan Bruens 05 Nov '16

05 Nov '16

Hi, due to lack of a dedicated opensuse-perl ML, I send this mail to factory. Currently perl-Wx wraps wxWidgets 2.8.12, while most other packages have switched to 3.0.2. As wx 2.8 pulls in gstreamer 0.10, it would be nice to upgrade to 3.0.2, which was recently patched to use GStreamer 1.0. Contrary to wxWidgets itself, perl-Wx can only be installed in one variant at a time (neither 2.8 and 3.0, nor any ABI variants). The only user of perl-Wx I am aware of is slic3r. I have tested slic3r with wxWidgets 3.0.2 noSTL and have not found any problems. perl-Wx currently only supports the noSTL variant. Even slic3r is not in Factory, but only in devel:languages:perl:slic3r. Open questions: 1. Are there any other users of perl-Wx in any other projects? 2. Prefer creating a complimentary perl-Wx-3_0-nostl package or just switch perl-Wx (and its prerequisite perl-Alien-Wx) from 2.8 to 3.0 noSTL? Currently Leap 42.2 and TW have wxWidgets-3_0-nostl, so these two can be switched. Kind regards, Stefan -- Stefan Brüns / Bergstraße 21 / 52062 Aachen home: +49 241 53809034 mobile: +49 151 50412019 work: +49 2405 49936-424 -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 1

Re: [opensuse-factory] openSUSE Leap 42.2 RC2 released
by Kyek, Andreas, Vodafone DE 04 Nov '16

04 Nov '16

Axel Braun wrote: > Am Mittwoch, 2. November 2016, 13:06:58 schrieb Ludwig Nussel: > > > tl;dr 42.2 RC2 is on the mirrors, get it from > > http://download.opensuse.org/distribution/leap/42.2/iso/ > > A hardware defect (Motherboard) of a 32bit 13.2 system gave me the > opportunity > to do a real world test: After the MB was exchanged against a new 64bit MSI > Board, 13.2 still started (!!!), but I went for an upgrade to Leap 42.2 RC2 > via Net installer. > Partition setup needed hand-crafting to match the multi-disk LVM, but that > was > the only manual activity. After download of 6GB the system came up like a > charme, and everything works up to now. Just the hylafax server cant acess > the > com-port, which I need to investigate. Just for my understanding: You did the upgrade from 32bit 13.2 to 32bit 42.2, right? Or was it really an upgrade also from 32 to 64 bit OS? Andreas

6 5

[opensuse-factory] openSUSE Tumbleweed – Review of the Week 2016/44
by Dominique Leuenberger / DimStar 04 Nov '16

04 Nov '16

Dear Tumbleweed users and hackers, While week 44 brought us openSUSE Leap 42.2RC2, Tumbleweed has seen 4 snapshots since my last week’s review (1028, 1031, 1101 and 1102). New things you received: * Flatpak 0.6.13 – there are quite some flatpaks around already to test * KDE Frameworks 5.27.0 * gnome-software 3.22.1 – of course with integrated flatpak support * libqt5-qtwebengine disables the usage of the gpu on nouveau/opengl And a few more things are piled up to reach you soon: * Samba 4.5.0 (1103+) * KDE Plasma 5.8.3 * Mesa 13.0 * Surely we will get a kernel update out next week * linux-glibc-devel 4.8 – still on the list, but getting ready Enjoy the updates! Dominique

1 0

[opensuse-factory] Odd problem
by ianseeks 04 Nov '16

04 Nov '16

Hi This is something i experienced this morning (twice), i've not tried it before so i'm not sure if this is a valid response from the system. I log in as a normal user (graphical mode - kdm) and after i hit the <cr> after entering the password, i did ctrl, alt F4 and logged in as root and did an "ls -l". The system would context switch me back to graphical mode and then fail to log into plasma and drop me back to the graphical login. Should the system be switching me back or run happily in the background? Regards Ian -- opensuse:tumbleweed:20161101 Qt: 5.7.0 KDE Frameworks: 5.27.0 KDE Plasma: 5.8.3 kwin5-5.8.3-164.1.x86_64 kmail5-16.08.2-1.1.x86_64 Kernel: 4.8.4-1-default Nouveau: 1.0.13_1.1 -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

3 5

[opensuse-factory] openQA what script to setup SUSEMIRROR and MIRROR_HTTP
by Normand 04 Nov '16

04 Nov '16

The install process in (1) suggest to place the iso file in /var/lib/openqa/share/factory/iso before to call the /usr/share/openqa/script/client but it seems that some script is used to also set two MIRROR variables as per test variables (2) * Are we able to access such script, to use on another openQA server ? * Is the http://openqa.opensuse.org/assets/repo/* something that is dynamically created before creating the client script ? or is it created when the iso is copied to ...factory/iso ? (1) https://github.com/os-autoinst/openQA/blob/master/docs/GettingStarted.ascii… (2) $wget -O- https://openqa.opensuse.org/tests/297606#settings 2>/dev/null |grep -A1 MIRROR <td style="text-align: left;">MIRROR_HTTP</td> <td style="text-align: left;">http://openqa.opensuse.org/assets/repo/openSUSE-Tumbleweed-oss-ppc64_ppc64l…</td> -- <td style="text-align: left;">SUSEMIRROR</td> <td style="text-align: left;">http://openqa.opensuse.org/assets/repo/openSUSE-Tumbleweed-oss-ppc64_ppc64l…</td> -- Michel Normand -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] Testing upgrade 13.1 to 42.2B3
by Carlos E. R. 03 Nov '16

03 Nov '16

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, I'm testing the upgrade to 42.2B3 from a 13.1 install under vmware. It has gone quite uneventfully. System boots. There is no network, just needs to enter in Yast and configure. There is an issue, though: graphics are dead. Black, no response to mouse or keyboard, not even ctrl-alt-backspace. I did ssh in, cpu is 0%. I don't see any problem in logs. Does it ring any bell? Ideas? - -- Cheers Carlos E. R. (from 13.1 x86_64 "Bottle" at Telcontar) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.22 (GNU/Linux) iEUEARECAAYFAlf1mfQACgkQtTMYHG2NR9XzuwCcDu0fz3HTCU1cYsypcF/I+7SW wgoAl2RBIeXEuMJ0YzVuCkgU5PN/OYY= =GMLW -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 4

[opensuse-factory] openSUSE Leap 42.2 RC2 released
by Ludwig Nussel 03 Nov '16

03 Nov '16

Hi, tl;dr 42.2 RC2 is on the mirrors, get it from http://download.opensuse.org/distribution/leap/42.2/iso/ We're almost done! The second release candidate is our last milestone before the 42.2 release. The RC2 changes look longer than they are in zypper dup as several packages had to be rebuilt without changes to make sure their release counter is higher than in 42.1. A big change is that the Mesa Nouveau 3D driver was split out to a separate package as KDE crashes with it on some NVidia cards. As usual please report any bugs via bugzilla¹. Make sure to check and update the most annoying bugs list² and release notes³. The gold master image will be prepared next week. Please submit any critical fixes ASAP. cu Ludwig [1] https://en.opensuse.org/openSUSE:Submitting_bug_reports [2] https://en.opensuse.org/openSUSE:Most_annoying_bugs_42.2_dev [3] http://doc.opensuse.org/release-notes/x86_64/openSUSE/Leap/42.2/index.html -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

9 13

[opensuse-factory] New Tumbleweed snapshot 20161102 released!
by Dominique Leuenberger 03 Nov '16

03 Nov '16

Please note that this mail was generated by a script. The described changes are computed based on the x86_64 DVD. The full online repo contains too many changes to be listed here. Please check the known defects of this snapshot before upgrading: https://openqa.opensuse.org/tests/overview?distri=opensuse&groupid=1&versio… When you reply to report some issues, make sure to change the subject. It is not helpful to keep the release announcement subject in a thread while discussing a specific problem. Packages changed: akonadi-server desktop-file-utils (0.22 -> 0.23) file gnome-software (3.22.0 -> 3.22.1) harfbuzz libarchive (3.2.1 -> 3.2.2) libkgeomap nfs-utils === Details === ==== akonadi-server ==== Subpackages: libKF5AkonadiAgentBase5 libKF5AkonadiCore5 libKF5AkonadiWidgets5 - Changed Requires to Recommends so Akonadi libraries don't require akonadi-server anymore and can be thus co-installable with akonadi-4.x . - Extracted libraries libKF5AkonadiPrivate5 and libKF5AkonadiXml5 from the akonadi-server package into new sub packages, so installing libraries don't require akonadi-server to be installed just because of the libraries. ==== desktop-file-utils ==== Version update (0.22 -> 0.23) - Update to version 0.23: + Accept version 1.1 desktop files. + Add Cinnamon, EDE and LXQt to the list of registered desktop environments (fdo#73497, fdo#56353, fdo#79561). + Allow multipart/related MIME type; it's used for MHTML (fdo#93376). + Ensure DBusActivatable filenames conform to reverse-DNS notation (fdo#66904). + Downgrade trailing semicolons to optional (fdo#76902). + Fix buffer over-read (fdo#94303). - Drop upstreamed fixed patches: + desktop-file-utils-fdo94303-fix-buffer-over-read.patch. + U_add-Cinnamon-desktop-environment_50271fe.patch. + U_add-EDE-desktop-environment_97d6ba3.patch. + U_trailing-semicolons-are-optional_aec5711.patch. - Rebase desktop-file-utils-suse-keys.patch. ==== file ==== Subpackages: file-devel file-magic libmagic1 libmagic1-32bit - Add patch file-5.28-btrfs-image.dif to add support for files output by btrfs-image. ==== gnome-software ==== Version update (3.22.0 -> 3.22.1) - Add pkgconfig(flatpak) BuildRequires and pass --enable-flatpak to configure now that we have flatpak in openSUSE. - Drop pkgconfig(xdg-app) BuildRequires: No longer needed as flatpak is now in place. - Update to version 3.22.1: + Fix several issues with flatpak bundles. + Fix installing local packages. + Fix a crash when failing to get an installed flatpak ref. + Speed up loading the details and overview pages. + Switch to using the ODRS server hosted by GNOME. + Updated translations. ==== harfbuzz ==== Subpackages: harfbuzz-devel libharfbuzz-icu0 libharfbuzz0 libharfbuzz0-32bit - Drop pkgconfig(icu-le) BuildRequires: That was actually removed upstream in version 0.9.21. ==== libarchive ==== Version update (3.2.1 -> 3.2.2) Subpackages: bsdtar libarchive-devel libarchive13 - update to version 3.2.2 Unspecified security fixes, but at least: * CVE-2016-8687.patch: bsc#1005070 * CVE-2016-8689.patch: bsc#1005072 * CVE-2016-8688.patch: bsc#1005076 * CVE-2016-5844.patch: bsc#986566, upstream issue 717 * CVE-2016-6250.patch: bsc#989980, upstream issue 711 * CVE-2016-5418.patch: bsc#998677, upstream issues 744, 745 and 746 - obsoletes fix-build.patch ==== libkgeomap ==== Subpackages: libKF5KGeoMap10_0_0 libkgeomap-devel - Marblewidget is a public dep -> devel subpackage requires marble-devel ==== nfs-utils ==== Subpackages: nfs-client nfs-doc nfs-kernel-server - move rpc.svcgssd and corresponding man page from nfs-client package to nfs-kernel-server. For NFSv4.0 this is needed on client as well as the server to support the back-channel. (bsc#1005609) -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] Kwright & Kate
by John L Bowling 03 Nov '16

03 Nov '16

Leap 42.1 with all upgrades installed. Currently Kwrite does not have any way of setting things, nor can it access print.If Kate is not installed, you cannot do anything other than edit save, and with Kate installed, you have to use it's controls to modify Kwrite. Also, when you have a file open with either one and they open it with the other, it closes the first. -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 1

[opensuse-factory] openQA missing jobs for PowerPC in new installed server
by Normand 03 Nov '16

03 Nov '16

If I compare the outputs of "openSUSE Tumbleweed PowerPC" group in openqa.opensuse.org (1) with a new installed openqa host, I found many differences about the list of tests as summarised in (2) I guess those differences are related to missing entries in the opensuse/templates (3) Is it a correct assumption ? or how to have a new installed openQA host to have same jobs as defined in (1) ? (1) https://openqa.opensuse.org/tests/overview?distri=opensuse&version=Tumblewe… (2) summary of differences: === openqa.opensuse.org new_host ppc64 ppc64le ppc64 ppc64le DVD: boot_to_snapshot x x gpt x x install_only_ppc@ppc64-multipath x x install_only_ppc@ppc64le-multipath - x install_only - - x lvm x x x mediacheck x x minimalx x x x x rescue_system x x - x texmode x x x mediacheck - - - x rescue_system - - - x === (3) https://github.com/os-autoinst/os-autoinst-distri-opensuse/blob/master/prod… -- Michel Normand -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

3 4

[opensuse-factory] efibootmgr partial list
by Hans de Faber 03 Nov '16

03 Nov '16

Hi everybody, Using leap 42.1 Is the something changed in the efibootmgr ??? Only 2 of the 9 entries show up in the list. Some time ago all entries show up. and are accesible. BootCurrent: 0009 Timeout: 2 seconds BootOrder: 0009,0000,000A,0006,0004,0003,0007,0002,0005 Boot0000* opensuse Boot0002* USB -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 1

[opensuse-factory] openSUSE Leap 42.2 - Beta 2 - call for manual testing again ;-)
by Marita Werner 03 Nov '16

03 Nov '16

Hello openSUSE supergeeks, techies and community members! openSUSE Leap 42.2 - Beta 2 was released yesterday! As Ludwig mentioned in his announcement the Beta version of Plasma 5.8 LTS [1] (which was just released last Thursday) has been integrated into Beta 2. Thanks to all testers, who have tested, reported bugs and have added their results to our Testmatrix so far. But again please test as much as you can and report all bugs you can find in bugzilla against the Leap Product [2]. Please have a look at the provided new Beta 2 Testmatrix [3] were you can check what is already covered by other testers. Add your name to the list, report bugs or other findings and share your test results. And feel free to extend the Matrix with Testcases/Testscenarios that of interest for you. Many thanks and happy testing! Marita [1] https://www.kde.org/announcements/plasma-5.7.95.php [2] https://bugzilla.opensuse.org [3] https://docs.google.com/spreadsheets/d/1AGKijKpKiJCB616-bHVoNQuhWHpQLHPWCb3… Some Bug report tips can be found here: https://en.opensuse.org/openSUSE:Submitting_bug_reports -- Marita Werner, Project Manager QA Phone +49 911 74053-222, eMail: mawerner(a)suse.com SUSE Linux GmbH, Maxfeldstr. 5, D-90409 Nuernberg GF: Felix Imendörffer, Jane Smithard, Dilip Upmanyu, Graham Norton, HRB 21284 (AG Nürnberg) -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

10 14

[opensuse-factory] New Tumbleweed snapshot 20161101 released!
by Dominique Leuenberger 02 Nov '16

02 Nov '16

Please note that this mail was generated by a script. The described changes are computed based on the x86_64 DVD. The full online repo contains too many changes to be listed here. Please check the known defects of this snapshot before upgrading: https://openqa.opensuse.org/tests/overview?distri=opensuse&groupid=1&versio… When you reply to report some issues, make sure to change the subject. It is not helpful to keep the release announcement subject in a thread while discussing a specific problem. Packages changed: hexchat (2.12.0 -> 2.12.3) nmap (7.30 -> 7.31) wine (1.9.21 -> 1.9.22) yast2-ruby-bindings (3.2.0 -> 3.2.1) yast2-trans (84.87.20161012.ac9e714 -> 84.87.20161026.cec15e5) === Details === ==== hexchat ==== Version update (2.12.0 -> 2.12.3) Subpackages: hexchat-lang - Version update to 2.12.3: * various small bugfixes in the 2.12 series * Add LUA scripting support - Drop patch hexchat-python3.patch ==== nmap ==== Version update (7.30 -> 7.31) - Nmap 7.31: * Fix the way Nmap handles scanning names that resolve to the same IP * Zenmap: Better visual indication that display of hostname is tied to address in the Topology page ==== wine ==== Version update (1.9.21 -> 1.9.22) Subpackages: wine-32bit - Updated to 1.9.22 development snapshot - macOS clipboard support adapted to the new design. - Initial implementation of bitmap rendering in Direct2D. - More WebServices implementation. - A few more steps towards HID support. - Various bug fixes. - updated winetricks ==== yast2-ruby-bindings ==== Version update (3.2.0 -> 3.2.1) - fix crash when references passed between clients (bsc#935385) - 3.2.1 ==== yast2-trans ==== Version update (84.87.20161012.ac9e714 -> 84.87.20161026.cec15e5) Subpackages: yast2-trans-af yast2-trans-ar yast2-trans-bg yast2-trans-bn yast2-trans-bs yast2-trans-ca yast2-trans-cs yast2-trans-cy yast2-trans-da yast2-trans-de yast2-trans-el yast2-trans-en_GB yast2-trans-en_US yast2-trans-es yast2-trans-et yast2-trans-fa yast2-trans-fi yast2-trans-fr yast2-trans-gl yast2-trans-gu yast2-trans-hi yast2-trans-hr yast2-trans-hu yast2-trans-id yast2-trans-it yast2-trans-ja yast2-trans-jv yast2-trans-ka yast2-trans-km yast2-trans-ko yast2-trans-lo yast2-trans-lt yast2-trans-mk yast2-trans-mr yast2-trans-nb yast2-trans-nl yast2-trans-pa yast2-trans-pl yast2-trans-pt yast2-trans-pt_BR yast2-trans-ro yast2-trans-ru yast2-trans-si yast2-trans-sk yast2-trans-sl yast2-trans-sr yast2-trans-sv yast2-trans-ta yast2-trans-th yast2-trans-tr yast2-trans-uk yast2-trans-vi yast2-trans-wa yast2-trans-xh yast2-trans-zh_CN yast2-trans-zh_TW yast2-trans-zu - Update to version 84.87.20161026.cec15e5: * New POT for text domain 'add-on'. * New POT for text domain 'alternatives'. * New POT for text domain 'base'. * New POT for text domain 'bootloader'. * New POT for text domain 'cio'. * New POT for text domain 'control'. * New POT for text domain 'firstboot'. * New POT for text domain 'gtk'. * New POT for text domain 'http-server'. * New POT for text domain 'installation'. * New POT for text domain 'network'. * New POT for text domain 'ntp-client'. * New POT for text domain 'packager'. * New POT for text domain 'qt-pkg'. * New POT for text domain 'rear'. * New POT for text domain 'registration'. * New POT for text domain 'samba-client'. * New POT for text domain 'storage'. * New POT for text domain 'vpn'. * Translated using Weblate (Catalan) * Translated using Weblate (Chinese (Taiwan)) * Translated using Weblate (Czech) * Translated using Weblate (Dutch) * Translated using Weblate (French) * Translated using Weblate (German) * Translated using Weblate (Indonesian) * Translated using Weblate (Japanese) * Translated using Weblate (Javanese) * Translated using Weblate (Lithuanian) * Translated using Weblate (Persian) * Translated using Weblate (Portuguese (Brazil)) * Translated using Weblate (Russian) * Translated using Weblate (Slovak) * Translated using Weblate (Swedish) * Translated using Weblate (Tajik) * Translated using Weblate (Ukrainian) * Use own textdomain (storage-ng instead of storage) (bsc#1004050) * fix arabic headers that I just messed up * remove shortcut in Arabic GUI element; boo#954723 * rpm-groups: Update po files for the new pot file. -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] Tumbleweed - tty behaviour
by nicholas cunliffe 01 Nov '16

01 Nov '16

new consistent undesirable behaviour, not a big deal but perhaps worth mentioning: changing to CTRL-ALT-F1 and then back to graphical (F7): 1. password required (i do not recall this requirement previously) 2. Touchpad no longer works (forcing to sleep then resume gets pointer motion back) -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 4

[opensuse-factory] KDE behaviour since 20161028 update
by Roger Whittaker 01 Nov '16

01 Nov '16

I'm finding KDE noticeably sluggish since the latest update, with kwin_x11 using quite a lot of resources. And "flip switch" Alt-Tab switching has gone away. (Graphics driver is nouveau.) Are others seeing similar, and is it worth a bug report? -- ======================== Roger Whittaker roger(a)disruptive.org.uk ======================== -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

6 9

[opensuse-factory] New Tumbleweed snapshot 20161031 released!
by Dominique Leuenberger 01 Nov '16

01 Nov '16

Please note that this mail was generated by a script. The described changes are computed based on the x86_64 DVD. The full online repo contains too many changes to be listed here. Please check the known defects of this snapshot before upgrading: https://openqa.opensuse.org/tests/overview?distri=opensuse&groupid=1&versio… When you reply to report some issues, make sure to change the subject. It is not helpful to keep the release announcement subject in a thread while discussing a specific problem. Packages changed: apparmor calligra dbus-1-glib gstreamer-transcoder inn kiwi (7.04.6 -> 7.04.8) libqt5-qtwebengine libwps llvm3_8 virt-viewer yast2-network (3.2.7 -> 3.2.8) === Details === ==== apparmor ==== Subpackages: apparmor-abstractions apparmor-docs apparmor-parser apparmor-profiles apparmor-utils libapparmor-devel libapparmor1 libapparmor1-32bit pam_apparmor pam_apparmor-32bit perl-apparmor python3-apparmor - add nscd-var-lib.diff to allow /var/lib/nscd/ in the nscd profile and abstractions/nameservice (path changed in latest nscd in Tumbleweed) ==== calligra ==== Subpackages: calligra-extras-dolphin calligra-extras-okular calligra-stage calligra-words-common - Disable Vc-devel-static build requirement again, it currently makes calligra crash on runtime, and Vc 1.3.0 is entering TW soon anyway which will break calligra's build ==== dbus-1-glib ==== Subpackages: dbus-1-glib-32bit dbus-1-glib-devel - Split out dbus-binding-tool in own sub-package. ==== gstreamer-transcoder ==== Subpackages: libgsttranscoder-1_0-0 typelib-1_0-GstTranscoder-1_0 - Update descriptions ==== inn ==== - Fix tmpfiles.d usage to give it at least a chance to work ==== kiwi ==== Version update (7.04.6 -> 7.04.8) Subpackages: kiwi-desc-isoboot kiwi-desc-netboot kiwi-desc-oemboot kiwi-desc-vmxboot kiwi-doc kiwi-media-requires kiwi-pxeboot kiwi-templates kiwi-tools - v7.04.8 released - Only one changelog section is allowed - Make sure an empty %changelog tag exists - No longer write a %changelog section in the spec For some reason the packaging concept no longer needs a changelog section in the spec file. Most likely the build service scripts now generates those information from the .changes file which lead to duplicate changelog information in the package - v7.04.7 released - Fixed a rounding error in partedMBToCylinder(): bc truncates number of cylinders to zero decimal places, which results in a partition that is slightly smaller than the requested size. Add one cylinder to compensate. - drop kiwi-instsource-plugins It got moved to https://github.com/openSUSE/kiwi-instsource-plugins ==== libqt5-qtwebengine ==== - Add disable-gpu-when-using-nouveau-boo-1005323.diff. Disables the use of the gpu by webengine when the nouveau opengl driver is detected since nouveau doesn't support rendering from different threads. Also, allows to use two environment variables QT_WEBENGINE_DISABLE_GPU to force the disabling of the gpu and QT_WEBENGINE_DISABLE_NOUVEAU_WORKAROUND to disable the detection of nouveau, just in case someone wants to try with newer nouveau releases (boo#1005323, boo#997171). ==== libwps ==== - Remove redundant pkgconfig requires ==== llvm3_8 ==== Subpackages: libLLVM3_8 libLLVM3_8-32bit - Install FileCheck utility, needed by rust bsc#1006199 ==== virt-viewer ==== - remove exclusivearch ==== yast2-network ==== Version update (3.2.7 -> 3.2.8) - Fixed a hardcoded interface name in a CLI test (bsc#1006799) - 3.2.8 -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

3 3

[opensuse-factory] snapper fails to accept group in ALLOW_GROUPS
by Holger Jakob 01 Nov '16

01 Nov '16

When I try to add a group to ALLOW_GROUPS in a snapper config file I get an "invalid group" error. The issue was tracked down to getgrnam_r(): In snapper-0.3.3/snapper/AppUtil.cc get_group_gid() fails to lockup the GID when bufsize (typically 1024) is too small. I have quite a number of users in a group in /etc/group. The the buffer size is not sufficient getgrnam_r() will fail with an ERANGE error. Increasing bufsize from 1024 to 2000 seems to work and obviously removing some of the users from the group helps too. I recommend to do something like described in http://pubs.opengroup.org/onlinepubs/9699919799/functions/getgrnam.html This will ensure enough space is made available. However, I am not sure if this issue is fully fixed by a change to snapper. It seems that the order of the groups AND the number of members in the group file matters too. If getgrname_r runs across an entry with too many members any subsequent entry is answered with an ERANGE error. So even if the group that is added to ALLOW_GROUPS does not have that many users but is listed after one that does the error would still occur. I don't think working around this with MAX_MEMBERS_PER_GROUP in /etc/login.defs is any better. Note: This report was first sent to "yast-devel" as suggested on the Snapper IO page. This list however seems more appropriate for discussion. -- Holger Jakob -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] Fwd: Post to opensuse-factory@opensuse.org denied: KMAIL 5.3.0: no printing
by Clemens Pietsch 01 Nov '16

01 Nov '16

Hello! I'm using KMAIL 5.3.0 and I got this error message when trying to print within KMAIL: "Die Druck-Unterstützung in WebEngine ist derzeit eingeschränkt. Für das Drucken wird ein externer Webbrowser verwendet." Using the browser makes printing possible, but not in KMAIL. I did a fresh installation of tumbleweed but it's the same. My notebook runs Tumbleweed with KMAIL 5.1.2 and there isn't an error saying that printing is only possible with the web browser. For me as a non-it-pro-user it looks like that there is no printing module in KMAIL 5.1.2 included. I can't find any printer settings in the program. Please give me some hints solving this problem! TIA! Clemens Version 5.3.0 (QtWebEngine) KDE Frameworks 5.26.0 Qt 5.7.0 (kompiliert gegen 5.7.0) Das xcb Fenstersystem -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

3 4

[opensuse-factory] snapper 0.3.3 fails to accept group in ALLOW_GROUPS
by Holger Jakob 01 Nov '16

01 Nov '16

When I try to add a group to ALLOW_GROUPS in a snapper config file I get an "invalid group" error. The issue was tracked down to getgrnam_r(). In snapper-0.3.3/snapper/AppUtil.cc get_group_gid() fails to lockup the GID when bufsize is too small. I have quite a number of users in a group in /etc/group. The the buffer size is not sufficient getgrnam_r() will fail with an ERANGE error. Increasing bufsize from 1024 to 2000 seems to work and obviously removing some of the users from the group helps too. I recommend to do something like described in http://pubs.opengroup.org/onlinepubs/9699919799/functions/getgrnam.html This will ensure enough space is made available. However, I am not sure if this issue is fully fixed by a change to snapper. It seems that the order of the groups AND the number of members in the group file matters too. If getgrname_r runs across an entry with too many members any subsequent entry is answered with an ERANGE error. So even if the group added to ALLOW_GROUPS does not have that many users but is listed after one that does the error would still occur. Note: This report was first sent to "yast-devel" as suggested on the Snapper IO page. This list however seems more appropriate for discussion. -- Holger Jakob -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0