October 2015 - openSUSE Factory - openSUSE Mailing Lists

RE: Re: [opensuse-factory] Tumbleweed installation fails with LVM error code -4013
by stakanov＠freenet.de 28 Oct '15

28 Oct '15

Well in my case Award BIOS (w/o UEFI that did not exist then, it is an old PC). And no legacy, the thing is actually a "real" BIOS. No pun intended. The partitioner gets particularly confused if another OS with Grub legacy is present. But also a second opensuse instal does make it go really "random" Even if there are completely empty hdd they are not choosen, for whatever reason. Weired. One has to propose them "by hand" (and still it tries to set the "wrong" swap which then causes problems to the OS installed. > -----Ursprüngliche Nachricht----- > Von: Neil Rickert > Gesendet: Mi. 28.10.2015 19:54 > An: opensuse-factory(a)opensuse.org > Betreff: Re: [opensuse-factory] Tumbleweed installation fails with LVM error code -4013 > > On Wednesday, October 28, 2015 07:55:04 PM Andrei Borzenkov wrote: >> 28.10.2015 19:40, Neil Rickert > пишет: >> > I had an additional issue. The > partitioner seemed to allocate a small >> > partition for "/boot". Except > it did not configure it for "/boot" and it >> > did not set a file > system. >> >> Let me guess. You use legacy BIOS and > GPT? > > Actually, I used UEFI and GPT. > > I'm not sure why you tried guessing, since those details are in the > link I > provided. > -- > To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org > To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org > > > > -----Ursprüngliche Nachricht Ende----- --- Alle Postfächer an einem Ort. Jetzt wechseln und E-Mail-Adresse mitnehmen! http://email.freenet.de/basic/Informationen -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] "About KDE" box in programs
by ianseeks 28 Oct '15

28 Oct '15

Hi General question, should this be a standard format across all programs? I've check 3 programs so far, Kmail, Dolphin, KinfoCentre. They all give 4 tabs, About, Report Bugs or Wishes, Join KDE, Support KDE with the same general info Kmail but additionally reports "Platform Version 4.14.12" kinfoCentre and Dolphin only have the 4 tabs and a different konqui icon I'm guessing that the Kmail "About" is KDE4 format so that would invalidate part of my question but shouldn't the about box report KDE relevant info like version numbers? regards Ian Tumbleweed/KDE -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 2

[opensuse-factory] Tumbleweed installation fails with LVM error code -4013
by stakanov＠freenet.de 28 Oct '15

28 Oct '15

system three separate hdd with: sda Leap sdb Mageia sdc will be Tumbleweed. I did erase the sdc (formerly formatted BSD) and proceeded for the install. After the install there was curiously nothing available at boot. Only leap and mageia as before. As leap for another bug is freezing currently when coming to unblock the Luks LVM, I went to Mageia and found: surprisingly for mageia the disk is empty. (WTF???). So I said, can happen, I went to put in the tumbleweed (latest available snapshot) in the dvd and started the installation. Comes out that Tumbleweed does ask you for a password for the tumbleweed installation on an empty disk. So I looked and yes, the former partitioning seems to be there. I then choose: propose a partitioning, attributed the whole disk, set to encrypted LVM. Anomaly: here it did not ask me for the password. I thought it would later on but now. Then installing it gives the following error: LVM_VG_REMOVE_FAILED error code -4013 /sbin/vgrepremove'system' -f command failed with status code 5 Is this a bug of the installer? How can it be that from the Mageia install on the same PC the partition appears completely empty but Tumbleweed sense the present of it? What does the error code tell me. To me it appears it cannot remove the existing partitions even if it was set to -f (force)? Statuscode 5? I am posting this to factory. I followed a discussion before that this is in the opinion of some not the right directory to post for tumbleweed and/or Leap. So if this turns out to be against the netiquette, please tell me to which list to post about tumbleweed / leap (as this is recently really not clear to me). Thank you. --- Alle Postfächer an einem Ort. Jetzt wechseln und E-Mail-Adresse mitnehmen! http://email.freenet.de/basic/Informationen -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

3 3

[opensuse-factory] tw-update repo needed or not?
by emanuel 28 Oct '15

28 Oct '15

tw-update repo enabled, http://git.io/vWP5u as shown, i just 'dup'ed to current tw-snapshot, pulseaudio dup'ed from main repo instead, perhaps main is newer, do i need to keep updates enabled or is it redundant? -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

4 3

[opensuse-factory] ARM Version
by gm1mqe＠aol.com 28 Oct '15

28 Oct '15

I see there seems to be a development version for ARM processors but have been unable to find an image I can download. Is one available and if so where. Thanks, Andy gm1mqe -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

4 4

RE: Re: [opensuse-factory] Tumbleweed installation fails with LVM error code -4013
by stakanov＠freenet.de 28 Oct '15

28 Oct '15

Neil sorry for the direkt reply, this interface here is killing me. I confirm all of it. I was able to install when not using encrypted Luks. Setting password to boot managerseems also toxic it seems. And you are right, the boot entry is not given if Leap is on the first disk alreadyinstalled I did at the end opt for a new install of leap too, will see now if at least TW installed willappear after mkinitrd in leap. I will then post a bug report on that and come back to you for the number. Greets. > -----Ursprüngliche Nachricht----- > Von: Neil Rickert > Gesendet: Mi. 28.10.2015 17:40 > An: opensuse-factory(a)opensuse.org > Betreff: Re: [opensuse-factory] Tumbleweed installation fails with LVM error code -4013 > > On Wednesday, October 28, 2015 12:06:59 PM stakanov(a)freenet.de > wrote: > >> for mageia the disk is empty. > (WTF???). So I said, can happen, I went to >> put in the tumbleweed (latest > available snapshot) in the dvd and started >> the installation. Comes out that > Tumbleweed does ask you for a password for >> the tumbleweed installation on an > empty disk. So I looked and yes, the >> former partitioning seems to be there. > I then choose: propose a >> partitioning, attributed the whole > disk, set to encrypted LVM. Anomaly: >> here it did not ask me for the > password. I thought it would later on but >> now. >> Then installing it gives the following > error: >> LVM_VG_REMOVE_FAILED >> error code -4013 >> /sbin/vgrepremove'system' -f >> command failed with status code > 5 > > This looks a bit similar to the issues that I had when installing > 20151017. > I've described this in a blog post at > href="https://nwrickert2.wordpress.com/2015/10/23/my-tumbleweed-install-for-octob…" > target="_blank">https://nwrickert2.wordpress.com/2015/10/23/my-tumbleweed-install-for-octob… > > I deleted the luks partition, then retried with some success. I'm > guessing > that if you did not give the LUKS password, it might have worked. > That is to > say, it could not remove the partition because it was busy, having > been opened > when you provided the password. > > I had an additional issue. The partitioner seemed to allocate a > small > partition for "/boot". Except it did not configure it for "/boot" > and it did > not set a file system. I had to fix that in the custom partitioner. > > If you have an open bug report on this, then mention the bug number > and I > might add notes from my experience. > -- > To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org > To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org > > > > -----Ursprüngliche Nachricht Ende----- --- Alle Postfächer an einem Ort. Jetzt wechseln und E-Mail-Adresse mitnehmen! http://email.freenet.de/basic/Informationen -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] Suse and Raspberry Pi Build
by gm1mqe＠aol.com 28 Oct '15

28 Oct '15

This is GREAT! As soon as my HDMI cable arrives I will install it onto a Pi 2 B+ and just have some fun. I had seen there were some ARM buids but was not sure what to use. Do any problems go here or is there a specific ARM forum? Thanks again, Andy gm1mqe -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 1

[opensuse-factory] unneeded hard requirements on cinnamon-factory/cinnamon-current
by emanuel 28 Oct '15

28 Oct '15

hello, my idea is simple, cinnamon is a WM and a nice one, i want kf5 under the hood, not gnome. i prefer using kf5-tumbleweed on cinnamon-factory-tumbleweed, with that i have gotten to the point where i see dependencies i have to deal with which seem to me ought to be a option and not forced; network-manager <-- i use wicked gnome-keyring <-- rather use kwallet gvfs <-- a nemo required dep nemo <-- no need , kf5 uses dolphin some of the above can be tweaked to become ignored, others i cant figure out how to remove(gnome-keyring). thanks in advanced for any advice, -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] /devel:/languages:/tcl/openSUSE_Leap_42.1/ ?
by Roger Oberholtzer 28 Oct '15

28 Oct '15

Should the Tcl repository for openSUSE_42.1 be called openSUSE_Leap_42.1? http://download.opensuse.org/repositories/devel:/languages:/tcl/openSUSE_Le… -- Roger Oberholtzer -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] Tumbleweed - Review of the week (2015/18)
by Dominique Leuenberger / DimStar 28 Oct '15

28 Oct '15

Dear Tumbleweed users and hackers, In good tradition I am pleased to also give you an overview of the last week on what happened in Tumbleweed. We had 'only' two snapshots released this week (0425 & 0430). The main reason was that the update of parted to version 3.2 managed to sneak through the staging area, yet had a negative impact on the full post -integration test runs (resizing partitions while installing openSUSE side-by-side of Windows is not properly handled). So, parted 3.2 is currently taken out of Tumbleweed again - but of course scheduled to reach you later: once YaST has been adjusted to handle the changes. On the side of things that DID happen: * As discussed on the -factory mailinglist, a couple packages have been converted from GStreamer 0.10 to 1.0 (banshee, gnac) * The kernel has been updated to version 4.0 What can we expect in the upcoming period? * The KDE Team is hard at work to make Plasma 5.3 the default for openSUSE. Work is still going on, but the staging areas are looking promising already. * The switch of GCC 5 as default version is also still work in progress. This is not forgotten yet. * Progress on Ruby 2.2 seems to have stalled - there hasn't been any progress in a while now. Volunteers to step up and work on the fallouts in Staging:H are welcome [0] [0] https://build.opensuse.org/project/show/openSUSE:Factory:Staging:H -- Have a lot of fun, Dimstar / Dominique Leuenberger <dimstar(a)opensuse.org> -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

23 73