October 2014 - openSUSE Factory - openSUSE Mailing Lists

[opensuse-factory] NetworkManager, wicked, dnsmasq and libvirt working on the same machine
by Johannes Kastl 25 Oct '14

25 Oct '14

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Evening everybody, before 13.2 comes out I thought I'd ask on how to get my laptop working again. But let me start at the beginning: The laptop is running NetworkManager, as I am using it in more than one WiFi. Historically, the laptop has also been running dnsmasq to resolve some local machines. This worked very nice with NetworkManager's ability to set the local search list according to which WiFi I am in. Then I started using libvirt, which also uses dnsmasq to provide network to the guests. As there have been some conflicts, I switched to running dnsmasq via NetworkManager (dns=dnsmasq in NetworkManager.conf and a dnsmasq.conf in /etc/NetworkManager/dnsmasq.d/). But somehow, this setup got mangled up, and there is no dns server set or not the right one. There should be 127.0.0.1 first, which then uses the right 'local' forwarder, depending on the WiFi. Also, after resuming from suspend-to-whatever, sometimes the search list is right, sometimes it is incomplete, sometimes this gets changed in the first minute after waking up. Strange! I am not sure how NetworkManager, netconfig and dnsmasq should work. And I am not sure how this is going to be handled, once 13.2 is released and wicked kicks in. Any hints, suggestions, tutorials and tricks are highly welcome... ;-) Regards, Johannes - -- 'Are you Death?' ... IT'S THE SCYTHE, ISN'T IT? PEOPLE ALWAYS NOTICE THE SCYTHE. (Terry Pratchett, The Fifth Elephant) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.22 (GNU/Linux) Comment: Using GnuPG with SeaMonkey - http://www.enigmail.net/ iEYEARECAAYFAlRL4ZgACgkQzi3gQ/xETbJm1ACeK7uIQNF3h6B5k1VI+XOJCr0+ hPYAn3Yrm71bW6clh7st5h1bvYKwt8PI =UYyX -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] Changes in mounting encrypted partitions?
by Christian Boltz 25 Oct '14

25 Oct '14

Hello, I'm using an encrypted /home partition and have a /var -> /home/sys-var/ symlink. This means I need /home mounted early so that /var becomes available. Therefore, I'm using the "initrd" flag in /etc/crypttab: cr_home /dev/md1 none initrd In the past (13.1 and Factory some months ago), I was asked for the /home passphrase a second after grub in text mode. Since some weeks (sorry, I don't remember the exact date), the system starts booting and asks for the passphrase after maybe 20 seconds, with a nice plymouth input field (which is partly displayed outside of my screen, probably caused by using a laptop + additional screen). A related issue could be that plymouth just uses a black background instead of the nice boot screen I'd expect. So the main question is: Is asking for the passphrase later (especially when the "initrd" flag is specified) an intentional change or a bug? Bonus points if someone can tell me why plymouth doesn't display a nice picture and displays the passphrase input field partly off-screen ;-) Regards, Christian Boltz -- Wie behebt man wohl das Problem einer vollen Mailbox? Ist das eine ernstgemeinte Frage von Dir? Wie waere es mal mit Emails loeschen? Bin ich hier bei versteckter Kamera gelandet? Ich fasse es nicht... [Thomas Hertweck (zu Thomas Hille) in suse-linux] -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

3 2

[opensuse-factory] Long boot time with Live KDE openSUSE 13.2 RC1 image
by Trent Hawkins 24 Oct '14

24 Oct '14

Downloaded the RC1 and dd to my usb thumbdrive. Plugged into my computer and booted up, but the boot time was very slow. The cause of this appeared to be: 1. The live image re-partitioning the usb device to have three partitions - sdc1; sdc2; sdc3 2. An error with the USB 3 card/xhci Here is the output from dmesg: [ 6.549548] sdc: sdc1 sdc2 [ 66.585958] systemd-udevd[271]: worker [276] /devices/pci0000:00/0000:00:1c.4/0000:0b:00.0/usb3/3-1/3-1:1.0/host7/target7:0:0/7:0:0:0/block/sdc is taking a long time [ 66.905601] usb 3-1: reset high-speed USB device number 2 using xhci_hcdqqq [ 66.905848] xhci_hcd 0000:0b:00.0: Setup ERROR: setup context command for slot 1. [ 66.905950] usb 3-1: hub failed to enable device, error -22 [ 67.059045] usb 3-1: reset high-speed USB device number 2 using xhci_hcd [ 67.059290] xhci_hcd 0000:0b:00.0: Setup ERROR: setup context command for slot 1. [ 67.059392] usb 3-1: hub failed to enable device, error -22 [ 67.211993] usb 3-1: reset high-speed USB device number 2 using xhci_hcd [ 67.224810] xhci_hcd 0000:0b:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff88021b54c1c0 [ 67.224921] xhci_hcd 0000:0b:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff88021b54c208 This repeats several times and then eventually something wakes up and the boot process continues: [ 312.297705] sdc: sdc1 sdc2 sdc3 [ 363.333238] UDF-fs: warning (device sdc2): udf_load_vrs: No anchor found [ 363.334635] UDF-fs: Rescanning with blocksize 2048 [ 363.342896] UDF-fs: INFO Mounting volume 'openSUSE 13.2 KDE Live', timestamp 2014/10/07 15:24 (1000) [ 363.452404] st: Version 20101219, fixed bufsize 32768, s/g segs 256 [ 363.604756] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 363.607365] sr 4:0:0:0: Attached scsi generic sg1 type 5 [ 363.609954] sd 6:0:0:0: Attached scsi generic sg2 type 0 [ 363.612473] sd 7:0:0:0: Attached scsi generic sg3 type 0 [ 363.871554] sda: sda1 sda2 sda3 [ 363.916281] UDF-fs: warning (device sdc2): udf_load_vrs: No anchor found [ 363.917819] UDF-fs: Rescanning with blocksize 2048 [ 363.937942] UDF-fs: warning (device sdc2): udf_load_vrs: No anchor found [ 363.940120] UDF-fs: Rescanning with blocksize 2048 [ 363.949173] UDF-fs: INFO Mounting volume 'openSUSE 13.2 KDE Live', timestamp 2014/10/07 15:24 (1000) [ 363.962884] fuse init (API version 7.23) [ 364.071899] EXT4-fs (sdc3): mounting ext3 file system using the ext4 subsystem [ 364.086697] EXT4-fs (sdc3): mounted filesystem with ordered data mode. Opts: (null) [ 364.158541] EXT4-fs (sdc3): mounting ext3 file system using the ext4 subsystem [ 364.178567] EXT4-fs (sdc3): mounted filesystem with ordered data mode. Opts: (null) It did boot, because i am typing this email from the live image now. All things seem to work fine. Note i have checked md5sum and running "check installation media" gives me the same result as above. Have not yet booted the live image in my usb 2 port. Thoughts? Trent -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 1

[opensuse-factory] A small gripe
by Trent Hawkins 24 Oct '14

24 Oct '14

No pdf reader provided on the kde live image? What happened to Okular? Trent -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 1

[opensuse-factory] nfs root is mounted read-only?
by Per Jessen 24 Oct '14

24 Oct '14

Booting from a nfs root filesystem appears to leave the root in read-only? The system takes forever to come up, but after I have access, I can easily do "mount -o remount,rw /". -- Per Jessen, Zürich (15.5°C) http://www.dns24.ch/ - your free DNS host, made in Switzerland. -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

4 10

[opensuse-factory] 13.2 Network Manager may be having problems like last time
by Roger Luedecke 24 Oct '14

24 Oct '14

I just spotted the following in the user help mailing list. This sounds an awful lot like before when we'd have to reboot to get a network connection. The network-manager icon is visible in the System tray with a red x next to it. When I hover over the icon it says "NetworkManager not running". When I click on the icon I see that no connection is configured. But I am connected and ifconfig reports: enp0s3 Link encap:Ethernet HWaddr 08:00:27:94:95:0D inet addr:10.0.2.15 Bcast:10.0.2.255 Mask:255.255.255.0 inet6 addr: fe80::a00:27ff:fe94:950d/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:498 errors:0 dropped:0 overruns:0 frame:0 TX packets:493 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:147902 (144.4 Kb) TX bytes:51504 (50.2 Kb) If I go in Yast2 > Services Manager I see that NetworkManager is disabled/inactive. The attempt to enable/activate seems to fail with: Could not enable NetworkManager: NetworkManager.service - Network Manager loaded: loaded (/usr/lib/systemd/system/NetworkManager.service: enabled) Active: inactive (dead) However after a reboot Network Manager is active and working as expected. -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 1

[opensuse-factory] Build mysql failed in aarch64
by zhangjian 23 Oct '14

23 Oct '14

Hi, guys This is Bamvor Jian Zhang from huawei OS team. I am trying to build mysql in aarch64. But It is failed because of compiler internal error[1]. Marcus want me to provide the smallest code about this compiler internal error. But the rror become random When I try to simplify the code(The original code failed every times). Meanwhile, I got libitm confilict when I try to build mysql through gcc49. It seems that libitm should be share with different compiler versions. It is why spec file put the libitm to a common directory, isn't it? So, I stuck here. Is here some suggestion about build mysql aarch64? Thanks. Bamvor [1] http://bugzilla.opensuse.org/show_bug.cgi?id=896667 -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

3 4

[opensuse-factory] New package wcd for openSUSE Factory
by Erwin Waterlander 23 Oct '14

23 Oct '14

Hi, I have created a new package wcd for openSUSE. Wcd is a shell utility to change directory fast on the command line. See also http://waterlan.home.xs4all.nl/#WCD_ANCHOR Wcd is a mature application. I am also the upstream maintainer of Wcd. Yesterday I have done a submit request the wcd package to devel project utilities (https://build.opensuse.org/project/show/utilities) The request is still open. best regards, Erwin Waterlander -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

12 42

[opensuse-factory] Upgarde PHP to PHP 5.4 in Suse linux enterprise server 11(patchlavel 2)
by Tapas Das 23 Oct '14

23 Oct '14

Hi , I want to upgrade my server php version from 5.3 to 5.4 . It is a VPS & I only can access terminal . Please give me some suggestion how can I do that. I have no experience on linux -- View this message in context: http://opensuse.14.x6.nabble.com/Upgarde-PHP-to-PHP-5-4-in-Suse-linux-enter… Sent from the opensuse-factory mailing list archive at Nabble.com. -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 1

[opensuse-factory] Kernel version and DP-MST support in openSUSE 13.2?
by Joschi Brauchle 23 Oct '14

23 Oct '14

Hi everyone, I just have a quick question: Which kernel version will be released with openSUSE 13.2? Will it be - 3.17 as stated here https://news.opensuse.org/2014/09/22/opensuse-13-2-is-coming-first-beta-has… or - 3.16 as in RC1 and later? Background: With somewhat recent Lenovo Thinkpad series laptops and docking stations DisplayPort Multi-Stream Transport (DP-MST) support is needed to get multiple screens working (independently). Similarly, many 4K displays may require DP-MST support to function correctly. DP-MST support for the Intel display driver was developed here http://cgit.freedesktop.org/~airlied/linux/log/?h=drm-i915-mst-support and seems to be included in kernel 3.17. Will this code be backported to provide DP-MST support openSUSE 13.2 in case it's released with kernel 3.16? I am certainly willing to help testing and/or open a bugreport/feature request if needed. Best regards, Joschi Brauchle

3 2