November 2013 - openSUSE Factory - openSUSE Mailing Lists

[opensuse-factory] How to analyse netdev watchdog, eth0 transmit queue timed out
by cagsm 19 Nov '13

19 Nov '13

How to analyse netdev watchdog, eth0 transmit queue timed out Is this rather a driver error that needs to be bugreported at the linux kernel directly, or can I figure out more about this with some kernel bootup switches for more extensive logging or so? Some ethernet cards give me these errors. Should I first go for a more current Opensuse version or a more current kernel? Thanks. -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] Moving a project to a different location
by Axel Braun 19 Nov '13

19 Nov '13

Hi, not completely a Factory topic, but I trust that one of you has the right idea.... I have two projects with around 50 packages each, which I need to move to a different location on the build service. AFAIK osc offers only the option to do this package by package, but not a whole project in one run. Any idea or tweak to ease the work with osc? Bash script might otherwise be the last resort. Thanks Axel

2 1

[opensuse-factory] mysql-workbench removed in 13.1
by Ruediger Meier 18 Nov '13

18 Nov '13

Hi, Does anybody know why mysql-workbench is not in openSUSE:13.1 repo? We have it in 12.3 and Factory. cu, Rudi -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

8 23

[opensuse-factory] openSUSE 13.1/Wayland
by Ikey Doherty 18 Nov '13

18 Nov '13

Hello all, My name is Ikey Doherty, and this is me swiftly introducing myself to the mailing lists. I originally sent this to opensuse-project and was told it would be best to resend here :) TL;DR(re:life) Software engineer, made LMDE, ran SolusOS, killed it, creates software. Done. Checking through openSUSE 13.1 I can see that Wayland seems partially supported, however not through the GTK (and related libs) stack. Notably I can see that the following packages do not have wayland enabled (--enable-wayland-backend) * gtk3 * cogl * clutter As far as I can tell the only stopping point in this chain was enabling Wayland support in GTK3, due to an old patch (from gtk3.7) being used in the gtk3 package. I've pushed to Factory [1] in the hopes this will then allow the rest of the packages to have the Wayland backend support enabled. My reasons are entirely selfish, I need the Wayland backend active to test Budgie [2] via Weston on openSUSE13.1, but that aside, I cannot see any particular reason to not have the backend enabled, especially once you consider the fact that the GTK3 libraries are already dynamically linked to the wayland libraries. Happy to do this work myself, hit a bit of a roadblock in terms of "where do I push?" as there seems to be no pattern in what repository is used (gtk3 I had to use GNOME:Factory, clutter required openSUSE:Factory but indeed thats a lot of build deps I do not want to test on openSUSE13.1 as its about to become stable. Can't seem to submit cogl anywhere) Any help on quickly implementing Wayland support in openSUSE would be much appreciated! Kind Regards, Ikey Doherty [1] https://build.opensuse.org/request/show/206495 [2] http://ikeydoherty.github.io/budgie/ -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

5 6

[opensuse-factory] YaST Software Management exits after package installation
by Rajko 18 Nov '13

18 Nov '13

openSUSE: 13.1 RC1 with one 'zypper dup' today I had a problem with YaST Software Management that was closing after package(s) installation. This is really not handy. It is the same as restarting text editor after each paragraph. With YaST Software Management we edit system, changing what it can do by adding, or removing, applications, and we have reasonable expectation that we should decide when to stop. There is entry in /etc/sysconfig/yast2 PKGMGR_ACTION_AT_EXIT="" that can be set to: close restart summary If it is empty, as above, it will default to close. As I can see at: http://www.muktware.com/2013/03/10-things-to-do-after-installing-opensuse-1… it seems that "close" is still default, after years of requests to make that "summary". There was also a bug report, that I can't find, but so far I recall, it was closed with conclusion that "summary" should be default. Background: Feature: Make Yast2 stay open after installing packages https://features.opensuse.org/312750 YAST "install software package" module exits immediately after installing one module: https://bugzilla.novell.com/show_bug.cgi?id=661229 https://features.opensuse.org/307942 change YaST PKGMGR_ACTION_AT_EXIT behavior from EXIT to RESTART -- Regards, Rajko. -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

19 28

[opensuse-factory] KDE sessions problem - Firefox
by Thomas Taylor 17 Nov '13

17 Nov '13

Not sure if this is the correct list for this message. Please advise if not. It seems that since OS 13.1-ß1 (?) I've been having a problem with the Firefox session not being restored (history) after shutdown/reboot. It opens with only my home page shown, all other tabs open at shutdown/reboot are lost. When I click on history, the "restore previous session" button is greyed out. (see attached screenshots). Current system in signature. In configure desktop I have "restore previous sessions" checked and this worked until ß1. What has changed? I'm wondering if it's a Firefox version change as I seem to recall that previously it was 22.0. Thanks, Tom -- It is curious that physical courage should be so common in the world, and moral courage so rare. - Mark Twain ^^ --... ...-- / -.- --. --... -.-. ..-. -.-. ^^^^ Tom Taylor - retired penguin - KG7CFC AMD Phenom II x4 955 -- 4GB RAM -- 2x1.5TB sata2 openSUSE 13.1_RC2-x86_64 KDE 4.11.12, FF 24.0, claws-mail 3.9.2 registered linux user 263467

1 0

[opensuse-factory] fc-config taking a long time, why run/font?
by Linda Walsh 17 Nov '13

17 Nov '13

fc-config takes a long time to run on my system (alot of fonts). The thing I am wondering: is it necessary to re-run it with each font installed? I count 173 packages that have fonts... @ ~ 2-3 minutes / run (2 minutes cpu/run), that's a long wait -- why not run it on a cron job == hourly if needed, but, obviously, not running if not needed? That's 6 hours of install time just for the fonts?! Ouch...why so long? -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

3 4

[opensuse-factory] Problem with lock screen in Gnome 3.10 (openSUSE 13.1)
by Manuel Trujillo (TooManySecrets) 16 Nov '13

16 Nov '13

Hi. First excuse me if this is not the right list. I detect (and I hope that this will not a "feature") that if you install an opensuse 13.1 system with KDE, and later I decide to install Gnome, the lock screen feature; a) doesn't appears in the gnome menu (between config apps and logoff session/off computer). b) if you try to lock the screen with Super+L also doesn't works. But, if you configure in Yast -> Configure editor of /etc/sysconfig files, to change KDE in favor of Gnome as windowmanager and displaymanager (with GDM), the lock screen runs without any problem (after a system reboot). Because I understand that this is something misconfigured of a fail in the defaul config, I opened (or try) a ticket in bugtraq, but although it does not the first time I open a ticket there, do not seem to ship anywhere (not even reach me my copy to my email). This is the ticket: https://bugzilla.novell.com/show_bug.cgi?id=849473 Thank you and please, excuse me my bad english :-/ Regards -- --------------------------------------------------------------------------------------- Have a nice day ;-) TooManySecrets /"\ ASCII Ribbon Campaign | FreeBSD Since 4.1 \ / - NO HTML/RTF in e-mail | GNU/Linux Since 1993. X - NO Word docs in e-mail | openSUSE Member since 2008 / \ - http://blog.toomany.net | http://twitter.com/toomanysecrets --------------------------------------------------------------------------------------- -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

5 7

[opensuse-factory] Getting config.log from failed OBS build?
by Andrey Borzenkov 15 Nov '13

15 Nov '13

Current snapshot of grub2 fails to build on PPC; as explained on grub-devel, this is due to missing libgcc symbols. I compared with the latest factory build. Factory: [ 267s] checking for __bswapsi2... yes [ 267s] checking for __bswapdi2... yes [ 267s] checking for __ashldi3... yes [ 267s] checking for __ashrdi3... yes [ 267s] checking for __lshrdi3... yes [ 267s] checking for __ucmpdi2... yes [ 268s] checking for _restgpr_14_x... yes Snapshot: [ 119s] checking for __bswapsi2... no [ 119s] checking for __bswapdi2... no [ 119s] checking for __ashldi3... no [ 120s] checking for __ashrdi3... no [ 120s] checking for __lshrdi3... no [ 120s] checking for __ucmpdi2... no [ 120s] checking for _restgpr_14_x... no Something has changed in either grub2 build system or in how compiler works on PPC. I can resort to "set -x" but getting config.log would be really more helpful. Thank you. -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

3 3

[opensuse-factory] Let's keep acroread for pure reasons of usability.
by Per Jessen 15 Nov '13

15 Nov '13

I think we ought to keep acroread in the distro simply because it's about usability. The current suggestions: a) download it from adobe yourself b) use something else are not good enough. If (a) was a real solution, why are we building building a distro at all. (b) is not a solution because there is no 100% replacement for acroread. By removing acroread, we are sacrificing critical usability because of a rule about unmaintained software. I suggest we reconsider and wait until the alternatives have caught up. Once we have a mature plug-compatible alternative, we can remove acroread. -- Per Jessen, Zürich (17.0°C) http://www.hostsuisse.com/ - dedicated server rental in Switzerland. -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

33 121