October 2013

[opensuse-factory] Missing key on Lenovo ThinkPad Edge E430
by Marcos Mello 04 Oct '13

04 Oct '13

Hi list, I installed openSUSE 12.3 on a Lenovo ThinkPad Edge E430 from Brazil (pt-br keyboard) and the "/?" key does not work. So far I just did a BIOS update to the latest version 2.54 but no luck :( It needs a quirk even with Windows: http://support.lenovo.com/en_US/diagnose-and-fix/detail.page?DocID=HT037686 Where should I report this? -- Marcos -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 1

[opensuse-factory] huawei usb dongle e173 not working on tumbleweed
by Ron Brickle 04 Oct '13

04 Oct '13

Hi I have been trying to get my huawei usb dongle working on Tumbleweed but to no avail so in desperation I am sending this email. it works fine on 12.3 opensuse so hopefully you can fix this problem I tried to get it working from help from the tumbleweed forum it is recognized in lsusb but doesn show in network-manager regards and thanks Ron Brickle -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

3 2

[opensuse-factory] Is openSUSE considering to bring back webpin?
by Roman Bysh 03 Oct '13

03 Oct '13

Hello Listmates, I was reading the Hack Week webpage and some peopling were suggesting to revive webpin for openSUSE. Here's the link: https://hackweek.suse.com/projects/42 Any thoughts? -- Cheers! Roman ------------------------------------------- openSUSE -- Get it! Discover it! Share it! ------------------------------------------- http://linuxcounter.net/ #179293 -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

5 7

Re: [opensuse-factory] huawei usb dongle e173 not working on tumbleweed
by Larry Finger 03 Oct '13

03 Oct '13

On 10/03/2013 02:13 AM, Ron Brickle wrote: > On Wed, 2013-10-02 at 22:56 -0500, Larry Finger wrote: >> On 10/02/2013 09:02 PM, Ron Brickle wrote: >>> Hi I have been trying to get my huawei usb dongle working on Tumbleweed >>> but to no avail so in desperation I am sending this email. it works >>> fine on 12.3 opensuse so hopefully you can fix this problem I tried to >>> get it working from help from the tumbleweed forum it is recognized in >>… [View More]> lsusb but doesn show in network-manager >>> regards and thanks Ron Brickle >> >> Firmware? >> >> A device present in lsusb only means that it is connected to the USB system. For >> NM to have it, any firmware must be present, the wifi-enable switch for *ALL* >> devices must be on, the device must be recognized by some driver, and that >> driver must load and initialize correctly. From the information you provided, it >> is impossible to tell where it is failing. >> >> Larry >> >> Hi i just put this in terminal as normal user then as root > > rpm -ql usb_modeswitch-data|grep 1446 > it returns no answer and it should be this I am told if so the driver > isnt installed for this usb modem TargetVendor= 0x12d1 > TargetProductList="1001,1406,140b,140c,1412,141b,1433,1436,14ac,1506" > > MessageContent="55534243123456780000000000000011062000000100000000000000000000" > is this any help > regards ron > lsusb gives thisron@desktop:~> rpm -ql usb_modeswitch-data|grep 1446 > ron@desktop:~> lsusb > Bus 001 Device 002: ID 8087:8008 Intel Corp. > Bus 002 Device 002: ID 8087:8000 Intel Corp. > Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub > Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub > Bus 001 Device 003: ID 046d:0809 Logitech, Inc. Webcam Pro 9000 > Bus 002 Device 003: ID 174c:2074 ASMedia Technology Inc. > Bus 002 Device 004: ID 2109:2812 > Bus 002 Device 007: ID 12d1:1446 Huawei Technologies Co., Ltd. > E1552/E1800/E173 (HSPA modem) > Bus 002 Device 005: ID 046d:c526 Logitech, Inc. Nano Receiver > Bus 002 Device 006: ID 046d:c52b Logitech, Inc. Unifying Receiver > and usb-devices gives this > Bus=02 Lev=03 Prnt=04 Port=00 Cnt=01 Dev#= 7 Spd=480 MxCh= 0 > D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 > P: Vendor=12d1 ProdID=1446 Rev=00.00 > S: Manufacturer=HUAWEI Technology > S: Product=HUAWEI Mobile > C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA > I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 > Driver=usb-storage > I: If#= 1 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 > Driver=usb-storage > thanks for your reply regards ron From the usb-devices output, the device obviously needs to be mode switched. There may be a regression from the openSUSE 12.3 kernel (probably 3.7) to the one used by Tumbleweed. The usb-storage drivers are maintinaed by Matthew Dharm <mdharm-usb(a)one-eyed-alien.net>. I suggest you contact him with a Cc to linux-usb(a)vger.kernel.org, usb-storage(a)lists.one-eyed-alien.net, and linux-kernel(a)vger.kernel.org and and state your problem, that it worked in kernel 3.7, but fails in the kernel 3.XX with the XX replaced by the version returned by 'uname -r'. Larry -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org [View Less]

1 0

[opensuse-factory] rubygem-gettext update to 3.0.1 breaks "rake gettext:pack"
by Tim Serong 03 Oct '13

03 Oct '13

Hi All, rubygem-gettext has been updated to version 3.0.1 in openSUSE:Factory, which seems to break "rake gettext:pack" with: rake aborted! cannot load such file -- gettext/utils AFACIT we need a newer rubygem-gettext_i18n_rails to accommodate recent changes in rubygem-gettext. Is anyone already looking at this? Thanks, Tim -- Tim Serong Senior Clustering Engineer SUSE tserong(a)suse.com -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 1

[opensuse-factory] Bison update in Factory
by Dimstar / Dominique Leuenberger 02 Oct '13

02 Oct '13

Hi all, seems a few days ago we got a new Bison checkin into Factory, which causes a bunch of fallouts (e.g. gstreamer-0.10, libgnomeprint are just some I came across so far). Not surprisingly, of course, those are 'no longer maintained' code bases by their respective upstreams. And I have, in all honesty, no idea about bison / flex / yacc syntax. Anybody who know about this stuff willing to step up and help out solving those issues? Thanks a lot! Dominique NB: I really don't think we … [View More]

7 7

[opensuse-factory] 13.1b1 mkinitrd problem
by Per Jessen 02 Oct '13

02 Oct '13

See https://bugzilla.novell.com/show_bug.cgi?id=843665 Basically, on 13.1b1 mkinitrd does not build a working initrd whereas it did/does on 12.3. On 13.1b1, feature "network" isn't automatically included nor is my network module which is required for a network boot. -- Per Jessen, Zürich (13.5°C) http://www.hostsuisse.com/ - dedicated server rental in Switzerland. -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] yast dependencies
by Alejandro Bonilla 02 Oct '13

02 Oct '13

Hi, I've upgraded from 12.3 to 13.1 but unfortunately, yast won't load. It looks like the culprit is 2013-09-20 14:05:03 <3> e6510.site(15413) [Y2Ruby] binary/YRuby.cc(callClient):235 cannot require yast:cannot load such file -- fast_gettext at /usr/lib64/ruby/2.0.0/rubygems/core_ext/kernel_require.rb:45:in `require' Do we have any information on the new requirements for yast? Thanks, Al -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

7 20

[opensuse-factory] Hypersensitive mouse in 13.1 installer
by Andrey Borzenkov 01 Oct '13

01 Oct '13

I can barely use mouse when installing 13.1 - acceleration is so high that it makes it near to impossible to position. I do not know whether this is kernel or X issue, but it would be nice to slow it down a bit, the same as in 12.3. Anyone noticed it as well? Using QEMU if it matters. -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 1

[opensuse-factory] New package submission to factory - jq
by Robert Munteanu 01 Oct '13

01 Oct '13

Hi, I'd like to introduce a new submission for factory - jq. As described in a previous mail, jq [0] is a lightweight and flexible command-line JSON processor. jq is like sed for JSON data – you can use it to slice and filter and map and transform structured data with the same ease that sed, awk, grep and friends let you play with text. jq currently lives in utilities/jq [1] and I'll forward it to factory soon. Robert [0]: http://stedolan.github.io/jq/ [1]: https://build.opensuse.org/… [View More]

1 0

Main

Development

Information

Community

Social Media

Other

openSUSE Factory