August 2011 - openSUSE Factory - openSUSE Mailing Lists

[opensuse-factory] removal of enigmail package
by Wolfgang Rosenauer 10 Aug '11

10 Aug '11

Hi, I'm starting to wonder if it makes sense to keep the enigmail package available as a package in openSUSE and would like to hear your opinion. Usually there is not much advantage in having Addons as RPMs but in case of Enigmail I always offered an exception for the following reasons: - enigmail should be part of TB by default (IMHO) - during the whole gcc C++ ABI changes there was no working Enigmail as public addon - for quite some time there was no x86-64 version available At the moment I think enigmail is pretty usable as provided by enigmail.mozdev.org (or addons.mozilla.org) It has both relevant architectures and multi locale support. On the other hand it turned out to be pretty problematic to offer a really working enigmail (with locales) for the fast pace of Thunderbird (beta) versions. In addition in the beginning it was meant to support Thunderbird and Seamonkey but in reality because of version differences it only supports Thunderbird anyway (most of the time). So what do you think about it? I'm currently running TB6beta2 with enigmail as available as nightly from the enigmail project and it's quite usable. IMHO this is sufficient and I'd recommend to drop enigmail as subpackage from Thunderbird in Factory. Wolfgang -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

3 7

[opensuse-factory] Can you make an exception and add kernel 3.1 to 12.1?
by Roman Bysh 10 Aug '11

10 Aug '11

Hi everybody, Could you make an exception and add kernel 3.1 as the kernel for 12.1? And, if it's too late. Can you add it as an update? Cheers! Roman -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

6 8

[opensuse-factory] how to migrate from init.d to systemd
by Alin Marin Elena 10 Aug '11

10 Aug '11

Hi All, I have decided to give a try to systemd... and it seems to work... after one waits 5 minutes or so (hope this bug gets fixed soon). However I have a small script that gets inserted in /etc/init.d/alsasound like this # See how we were called. case "$1" in start) if [ "$PREVLEVEL" = "N" ]; then test -d /proc/asound && start_rest else start_all fi /bin/bash /etc/imic.sh ;; what changes shall I do to make systemd do the same? Alin -- Without Questions there are no Answers! _____________________________________________________________________ Alin Marin ELENA Advanced Molecular Simulation Research Laboratory School of Physics, University College Dublin ---- Ardionsamblú Móilíneach Saotharlann Taighde Scoil na Fisice, An Coláiste Ollscoile, Baile Átha Cliath ----------------------------------------------------------------------------------- http://alin.elenaworld.net ______________________________________________________________________

3 6

[opensuse-factory] Getting systemd to work on Factory
by Raymond Wooninck 10 Aug '11

10 Aug '11

Since some days I am trying to get systemd to work on my system. I already tried the packages from Factory and from Base:System, but both end up in exactly the behaviour. Systemd is booting the kernel and then to end up in a console login prompt. After several minutes nothing is happening and strangely enough trying to login also fails. The system is asking me for the password, but somehow the shell is never started. I don't know what happened as that a few months ago with one of the early version of systemd, things were working as expected. I guess that I am doing something wrong or that maybe a certain setting is preventing systemd to work properly. I would appreciate any help on this topic. Thanks Raymond (tittiatcoke) -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

3 2

[opensuse-factory] Integration of firewalld?
by Vincent Untz 09 Aug '11

09 Aug '11

Hi, I wonder: did anybody look at integrating firewalld (a firewall service daemon with D-BUS interface managing a dynamic firewall), or proposing a similar dbus API for what we have? I'm starting to see some applications making use of the dbus API, and it does improve user experience to have that. https://fedoraproject.org/wiki/FirewallD/ https://fedorahosted.org/firewalld/ Thanks, Vincent -- Les gens heureux ne sont pas pressés. -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

11 49

[opensuse-factory] Fwd: jack and --dbus configure option
by Michal Šebeň 09 Aug '11

09 Aug '11

---------- Forwarded message ---------- From: Michal Šebeň <mseben(a)gmail.com> Date: Mon, Aug 8, 2011 at 2:54 PM Subject: jack and --dbus configure option To: opensuse-multimedia(a)opensuse.org Hi, Could we/I turn on --dbus option for jack daemon in Factory builds ? : see osc cat openSUSE:Factory jack jack.spec | less and check the %define - wdbus is always 0 I think for users would by more comfortable, if jack use dbus feature and can suspend pulseaudio itself or did I missed something ? thanks michal -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

1 0

[opensuse-factory] Tumbleweed: No surround-sound using Kernel 3.0.0 (hda_intel)
by Marcel 08 Aug '11

08 Aug '11

Hi, If I'm using kernel 3.0.0 from tumbleweed I can get just stereo-sound. The center, subwoofer and rear-loudspeaker are silent.Booting the last installed 2.6.39.2-35 the sound is working fine. I'm using the following hardware: 00:14.2 Audio device [0403]: ATI Technologies Inc SBx00 Azalia (Intel HDA) [1002:4383] Subsystem: Giga-byte Technology GA-MA770-DS3rev2.0 Motherboard [1458:a022] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 4 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at fe024000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: HDA Intel -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

3 3

[opensuse-factory] HAL permissions
by Ilya Chernykh 08 Aug '11

08 Aug '11

As you know hal is needed for normal operation of KDE3. Some people who run Factory with KDE3 have reported that hal now apparently has insufficient permissions to mount removable drives. While they are visible, they cannot be mounted with the following error: org.freedesktop.hal.storage.mount-removable auth_admin_keep_always <-- (action, result) Can you please point me to what package contains those permissions? -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

3 3

[opensuse-factory] Change behavior of writting new kernel in boot menu
by Josef Reidinger 08 Aug '11

08 Aug '11

Hi, due to some complains about using values for new kernel entries from sysconfig I change behavior in perl-Bootloader to use value from menu.lst and only when old entry is not found use as backup sysconfig value. I also merge some fixes from SLES. Are there volunteers to test new package? ( mainly test updating kernel packages, try if manual changes to menu.lst preserve kernel update ). I don't want break factory in such sensitive part. New package can be found at ( my home repo - package perl-Bootloader)) http://download.opensuse.org/repositories/home:/jreidinger/openSUSE_Factory/ (factory) http://download.opensuse.org/repositories/home:/jreidinger/openSUSE_11.4/ (11.4) Thanks Josef -- Josef Reidinger Appliance Toolkit team maintaining parts of webyast and SLMS author of rubygems - studio_api and net_observer (coauthor) -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

4 6

[opensuse-factory] /dev/fuse permissions changed
by Dimstar / Dominique Leuenberger 08 Aug '11

08 Aug '11

Hi all, for a few days (weeks? Not sure... ) my /dev/fuse has wrong permissions: > ls -la /dev/fuse crw------- 1 root root 10, 229 Aug 8 08:59 /dev/fuse This in turn stops sshfs from mounting anything (actually: no permission to use fuse for normal users). Is this an intentional change at some point? I'm not entirely sure when it started, as I do not use fuse on a daily base, but having this issue now means I always have to set the permissions right for fuse to work at all. The udev rule does seem normal to me: KERNEL=="fuse", MODE="0666", OPTIONS +="static_node=fuse", \ RUN+="/bin/mount -t fusectl fusectl /sys/fs/fuse/connections" Anything else I can check? Best regards, Dominique -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

1 0