February 2011 - openSUSE Factory - openSUSE Mailing Lists

[opensuse-factory] KDE menus and gitorious
by Cristian Morales Vega 06 Nov '12

06 Nov '12

I created a merge request for desktop-data three weeks ago. It's just a minor patch that doesn't really fix anything but a warning from kbuildsycoca4. I'm not sure about how Gitorious works, maintainers are supposed to notice the "1" in the merge requests section or they receive an email notifying it? And since I'm on it. Since I updated my 11.3 system to KDE to 4.5 the "inline" part of the menu is not honored... Expected behavior? Known problem? -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

4 6

[opensuse-factory] Kernel for 11.4?
by Jeff Mahoney 22 Sep '11

22 Sep '11

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi all - Since technically we're in feature freeze for 11.4, I thought I'd put this out for discussion. Factory is currently using 2.6.36 which was released 3 weeks ago. Upstream versions tend to take about 10-11 weeks, on average, to release. The scheduled release for the first openSUSE RC is Jan 20. The scheduled release for the first RC is Jan 20. The typical development time for a kernel release, on average, is about 10-11 weeks. That puts the release of 2.6.37 around Dec 29 to Jan 12. That sounds like kind of a tight window, but the reality is that the differences in the later kernel RCs tend to be small and fix bugs. The "real" development happens in -rc1, which was released about two weeks ago. Later -rcs serve to stabilize the development that went into -rc1. So, the the feature freeze aspect of it will be a one-shot, when I update to -rc1. (Actually, I hardly ever update to -rc1 and instead use - -rc2 which tends to be more stable). I've already done the merge work for 2.6.37-rc1 since the master kernel always tracks the latest upstream. Xen is the lone exception, as it usually is, but Jan Beulich has been great about getting that completed shortly after I do the update. This time might be a little more difficult because much of the Xen code has been merged into the mainline kernel so there's some sorting out to be done. As far as testing goes, we're still early enough that we won't lose a lot of effort. I'd update Factory to 2.6.37-rc2 as soon as it is released upstream, which should be this week. Our usual corps of dedicated testers can dig in quickly. In my experience, though, the number of testers drastically increases around the RC1 release. I wish it weren't so, but it is. So revving the kernel now isn't likely to toss out a lot of testing. The biggest "feature" I'm going for is not having to backport fixes from 2.6.37. The BKL removal patches and the VFS scalability patches are going to improve performance on multicore systems. The removal of I/O barriers should also be pretty noticeable but I haven't had time to verify that yet. So, opinions? - -Jeff Features that are going into 2.6.37: - - The inode portion of the VFS scalability patches - - More BKL removal, including parts of the core kernel - - Block I/O can be throttled via cgroups - - Simple pNFS support - - In-kernel PPTP (tunneling) acceleration - - "Lazy" inode table creation for ext4 to allow faster fs creation - - Batched discard support, which allows the file system to advise the block layer to use the TRIM command. This allows online TRIMs, but is only implemented in ext4 so far. - - Xen dom0 support (mostly) - - The usual round of bug fixes. - - fanotify - - Block barriers have been removed[1] Drivers: - - Systems and processors: - Flexibility Connect boards - Telechips TCC ARM926-based systems - Telechips TCC8000-SDK development kits - Vista Silicon Visstrim_m10 i.MX27-based boards - LaCie d2 Network v2 NAS boards - Qualcomm MSM8x60 RUMI3 emulators - Qualcomm MSM8x60 SURF eval boards - Eukrea CPUIMX51SD modules - Freescale MPC8308 P1M boards - APM APM821xx evaluation boards - Ito SH-2007 reference boards - IBM "SMI-free" realtime BIOS's - MityDSP-L138 and MityDSP-1808 systems - OMAP3 Logic 3530 LV SOM boards - OMAP3 IGEP modules - taskit Stamp9G20 CPU modules - aESOP Samsung S5PV210-based Torbreck boards - - Block: - Chelsio T4 iSCSI offload engines - Cypress Astoria USB SD host controllers - Marvell PXA168/PXA910/MMP2 SD host controllers - ST Microelectronics Flexible Static Memory Controllers - - Input: - Roccat Pyra gaming mice - UC-Logic WP4030U, WP5540U and WP8060U tablets - several varieties of Waltop tablets - OMAP4 keyboard controllers - NXP Semiconductor LPC32XX touchscreen controllers - Hanwang Art Master III tablets - ST-Ericsson Nomadik SKE keyboards - ROHM BU21013 touch panel controllers - TI TNETV107X touchscreens - - Miscellaneous: - Freescale eSPI controllers - Topcliff platform controllher hub devices - OMAP AES crypto accelerators - NXP PCA9541 I2C master selectors - Intel Clarksboro memory controller hubs - OMAP 2-4 onboard serial ports - GPIO-controlled fans - Linear Technology LTC4261 Negative Voltage Hot Swap Controller I2C interfaces - TI BQ20Z75 gas gauge ICs - OMAP TWL4030 BCI chargers - ROHM ROHM BH1770GLC and OSRAM SFH7770 combined ALS and proximity sensors - Avago APDS990X combined ALS and proximity sensors - Intersil ISL29020 ambient light sensors - Medfield Avago APDS9802 ALS sensor modules - Basic, memory-mapped GPIO controllers - Intel Topcliff GPIO controllers - Intel Moorestown/Medfield i2c controllers - IDT CPS Gen.2 SRIO RapidIO switches - Freescale i.MX DMA engines - ARM PrimeCell PL080 or PL081 DMA engines - Cypress West Bridge Astoria controllers - USB ENE card readers - Asahi Kasei AK8975 3-axis magnetometers - OLPC XO display controller devices - Analog Devices AD799x analog/digital converters - Winbond/Nuvoton W83795G/ADG hardware monitoring chips - Flarion OFDM usb and pcmcia modems - Maxim MAX8952 and MAX8998 Power Management ICs - National Semiconductors LP3972 PMIC regulators - Broadcom BCM63xx hardware watchdogs - - Network: - Brocade 1010/1020 10Gb Ethernet cards - Conexant CX82310 USB ethernet ports - Atheros AR9170 "otus" 802.11n USB devices - Topcliff PCH Gigabit Ethernet controllers - Intel Topcliff platform controller hub CAN interfaces - Technologic Systems TS-CAN1 PC104 peripheral boards - SBE wanPMC-2T3E3 interfaces - RealTek RTL8712U (RTL8192SU) Wireless LAN NICs (replaces older rtl8712 driver) - Atheros AR6003 wireless interface controllers - Beeceem USB Wimax adapters - Broadcom bcm43xx wireless chipsets - - Sound: - Marvell 88pm860x codecs - TI WL1273 FM radio codecs - HP iPAQ RX1950 audio devices - Native Instruments Traktor Kontrol S4 audio devices - Aztech Sound Galaxy AZT1605 and AZT2316 ISA sound cards - Wolfson Micro WM8985 and WM8962 codecs - Wolfson Micro WM8804 S/PDIF transceivers - Samsung S/PDIF controllers - Cirrus Logic EP93xx AC97 controllers - Intel MID SST DSP devices - - USB: Intel Langwell USB OTG transceivers - YUREX "leg shake" sensors - USB-attached SCSI devices - - Video4Linux2: remotes using the RC-5 (streamzap) protocol - Konica chipset-based cameras - Sharp IX2505V silicon tuners - LME2510 DM04/QQBOX USB DVB-S boxes - Samsung s5h1432 demodulators - Several new Conexant cx23417-based boards - Nuvoton w836x7hg consumer infrared transceivers - OmniVision OV6650 sensors - OMAP1 camera interfaces - Siliconfile SR030PC30 VGA cameras - Sony imx074 sensors - VIA integrated chipset camera controllers - -Jeff [1] This is because they were a very big hammer that had a reputation for killing performance. They're necessary for safely using journals on devices with write caching enabled, but were implemented by flushing the entire I/O queue to physical media -- not just "to disk" which includes the disk's write cache. The new implementation will still use the flush-to-media feature but will not stall the i/o queue. - -- Jeff Mahoney SUSE Labs -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.16 (GNU/Linux) Comment: Using GnuPG with SUSE - http://enigmail.mozdev.org/ iEYEARECAAYFAkzhW0YACgkQLPWxlyuTD7JgBACbBfR+uJwfKKnEcBZIg/KeIj/S hikAnRiL9nG50QoKZkrn1AsmGljnGvYn =T/Hp -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

15 33

[opensuse-factory] IPV6 privacy in openSUSE
by Andreas Jaeger 13 Sep '11

13 Sep '11

I wonder whether our IPv6 settings are the right ones after reading the following article (sorry, German only): http://www.heise.de/newsticker/meldung/IPv6-Smartphones-gefaehrden-Privatsp… which references: http://www.heise.de/netze/hotline/IPv6-anonym-1100727.html We set use_tempaddr to 0 by default (disabling privacy extensions) and set it to 1 if enabled. The article advises to use 2. Background: By default (value 0) my IPv6 address will be derived from my hardware (macaddr) and therefore be the same independend how I connect to the internet. So, it's easy to track my computer... So, my proposal is to do the following two changes: * Use 2 instead of 1 in /etc/rc.d/boot.ipconfig for enabling the privacy extensions * Set IPV6_PRIVACY=yes in /etc/sysconfig/sysctl Any concerns with this change? Btw. here's an Ubuntu bugreport: https://bugs.launchpad.net/ubuntu/+source/procps/+bug/176125 and Windows (since XP) is doing it the same way on desktops. Andreas -- Andreas Jaeger, Program Manager openSUSE, aj(a){novell.com,opensuse.org} Twitter: jaegerandi | Identica: jaegerandi SUSE LINUX Products GmbH, GF: Markus Rex, HRB 16746 (AG Nürnberg) Maxfeldstr. 5, 90409 Nürnberg, Germany GPG fingerprint = 93A3 365E CE47 B889 DF7F FED1 389A 563C C272 A126 -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

7 6

[opensuse-factory] Cronie as default cron in Factory
by Michal Seben 07 Jun '11

07 Jun '11

Hi all! Next week I will move cronie[1] package to Factory, so it will replace old cron. If someone is against this step, please just write what's wrong. As I announced earlier, you could find Cronie in Base:System repo [2] there is also prepared wiki about known changes after switch to cronie [3] [1]https://fedorahosted.org/cronie/ [2]https://build.opensuse.org/package/show?package=cronie&project=Base%3ASys… [3]http://en.opensuse.org/Cron_replace#Differences_between_old_openSUSE.27s_… -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

12 28

[opensuse-factory] VirtualBox oops
by johnm_s2 11 Mar '11

11 Mar '11

11.4 factory-tested RC1 x86_64 Hello, The UI works ok and everything. You can create & configure VMs. I create an openSUSE 64bit VM. But as soon as I try to start a VM, I get kernel oops: http://pastebin.com/Pnh85Fda ~> rpm -qa kernel-desktop kernel-desktop-2.6.37-20.1.x86_64 ~> rpm -qa "*virtualbox*" virtualbox-host-kmp-desktop-4.0.2_k2.6.37.0_20-4.1.x86_64 virtualbox-qt-4.0.2-4.1.x86_64 virtualbox-4.0.2-4.1.x86_64 -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

5 7

[opensuse-factory] Qtcurve-->Configure Aqua Apply then Curve Apply causes plasma desktop to crash on RC2
by Roman Bysh 02 Mar '11

02 Mar '11

Hello Listmates, I have installed KDE 4.6.0 openSUSE 11.4 RC2 Every time I select Qtcurve -->Configure--> Aqua OK and Apply. Then Qtcurve -->Configure--> Curve OK and Apply. This preset change causes the plasma desktop to crash every time including kwin, akonadi, nepomuk.... I had to press CTRL+ALT+DEL twice to exit the crash and log back in again. My graphics card is a GeForce 8600 GTS Nvidia driver NVIDIA-Linux-x86_64-270.29.run used. Reproducible: Always Steps to Reproduce: 1. Select Configure Desktop --> Application Appearance 2. Select Qtcurve -->Configure--> Aqua OK and Apply 3. Select Qtcurve -->Configure--> Curve OK and Apply 4. Plasma desktop crashes Please see Bugzilla link: https://bugzilla.novell.com/show_bug.cgi?id=675651 -- Cheers! Roman "Six by nine. Forty two." "That's it. That's all there is." "I always thought something was fundamentally wrong with the universe" -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

1 2

[opensuse-factory] Does YaST accidentally overwrite files?
by Thomas Goettlicher 01 Mar '11

01 Mar '11

Hi all, Once upon a time there were a few YaST modules which overwrote manually edited configuration files. Instead of changing only certain configuration options YaST overwrote all entries of the specific configuration file. In this case values were lost which had been manually changed before running YaST. YaST doesn't accidentally overwrite configuration values anymore! If it does it's a bug. If you know any YaST module that still destroys manually changed configuration files. please report a bug (and cc me). We want to get rid of the myth that YaST accidentally overwrites files. Thank you Thomas -- Thomas Goettlicher SUSE LINUX Products GmbH, GF: Markus Rex, HRB 16746 (AG Nuernberg) -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

5 6

[opensuse-factory] Re: [opensuse-announce] openSUSE 11.4 RC2 Steps Out
by Andreas Jaeger 28 Feb '11

28 Feb '11

> Le 28/02/2011 09:49, Andreas Jaeger a écrit : > > With red carpets rolling out in Hollywood, you’d expect some applause > > for the openSUSE 11.4 RC2 release > > and 9 minutes full install... realtime: > > http://www.youtube.com/watch?v=i3wi_7EplCo Cool! Andreas -- Andreas Jaeger, Program Manager openSUSE, aj(a){novell.com,opensuse.org} Twitter: jaegerandi | Identica: jaegerandi SUSE LINUX Products GmbH, GF: Markus Rex, HRB 16746 (AG Nürnberg) Maxfeldstr. 5, 90409 Nürnberg, Germany GPG fingerprint = 93A3 365E CE47 B889 DF7F FED1 389A 563C C272 A126 -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

1 0

[opensuse-factory] NIC bonding ?
by Per Jessen 28 Feb '11

28 Feb '11

Has anyone tried setting up a bonding interface with current Factory? I'm seeing some pretty weird behaviour - should I expected bonding to work? -- Per Jessen, Zürich (0.0°C) -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

2 6

[opensuse-factory] A KDE patch just went upstream that I hope gets in 11.4
by Greg Freemyer 27 Feb '11

27 Feb '11

All, I'm not on the opensuse-kde list, but I just saw the dolphin bug that causes it to crash when previewing a PPT file get marked resolved. https://bugs.kde.org/show_bug.cgi?id=249876 See the last few entries. I consider this a major bug and I really hope that the fix can be backported to 11.4 (and even 11.3) Thanks Greg -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

4 7