July 2010

[opensuse-factory] duplicate mount points
by jdd 04 Jul '10

04 Jul '10

It's not very important (at least for me), but could be if one wanted to use a script I have an USB 1.5TB HDD . It mounts on new mount point sometime: /media: -rw-r--r-- 1 root root 106 juil. 4 13:03 .hal-mtab -rw------- 1 root root 0 juil. 4 10:53 .hal-mtab-lock drwxrwxrwx 14 root root 4096 juil. 4 13:10 maxtor-1to drwx------ 2 root root 4096 juin 26 17:15 wd-1.5to drwx------ 2 root root 4096 juil. 3 20:16 wd-1.5to-1 drwxrwxrwx 16 root users 4096 juin 1 21:07 wd-1.5to-2 … [View More]

1 0

[opensuse-factory] shutdown/restart in gnome returns to login when using kdm on 11.3 RC2
by Stachel Drahtje 04 Jul '10

04 Jul '10

Hi, this is my first post and maybe this isn't a bug, and i'm doing something wrong amd i'm making a fool out of myself, so this is what i'm trying to understand: I install both gnome and kde 4 on an x86_64 machine with the 11.3 RC2. But i had this problem in 11.2 as well if my memory serves me correctly. The displaymanager is kdm. when i log in using the gnome windowmanager and want to reboot or shutdown the computer, it puts me back to kdm with the login prompt. I know the simple answer … [View More]

6 8

[opensuse-factory] Re: logging related
by Per Jessen 04 Jul '10

04 Jul '10

"Horváth Gergely J. (Ottó)" wrote: > I have done a little research among distributions, to have a bigger > perspective, and based on that, I have some ideas and questions. More > important ones first: > > * OpenSUSE should log auth and authpriv messages separately (like > "all" other distributions do). > > We certainly can not start a great debate on what to log and where, > but I would like to mention some other points too: > > * OpenSUSE does not log crond … [View More]

2 1

[opensuse-factory] console low resolution
by Günther J. Niederwimmer 04 Jul '10

04 Jul '10

Hello, Please can any tell me the procedure to change the console resolution. My Problem is the graphic resolution in the console, I can't read this small letter. All my changes have no effect? I change grub (vga=0x314), disabled splash change all in /etc/sysconfig and make a new initrd? the result is a high resolution console? -- mit freundlichen Grüßen / best Regards, Günther J. Niederwimmer -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

7 19

[opensuse-factory] 11.2 => 11.3 zypper dup question
by Greg Freemyer 03 Jul '10

03 Jul '10

All, I was just looking at the wiki entry for the coming upgrade: http://wiki.opensuse.org/SDB:System_upgrade In the 11.1 => 11.2 upgrade the wiki page showed something like: disable all repos add new repos zypper up zypper zypper dup In the current wiki page, the "zypper up zypper" command is gone. Is it not recommended to get zypper from 11.3 prior to doing the full zypper dup? Greg -- Greg Freemyer Head of EDD Tape Extraction and Processing team Litigation Triage Solutions … [View More]

2 1

[opensuse-factory] Re: [opensuse-project] Logging related
by Per Jessen 03 Jul '10

03 Jul '10

"Horváth Gergely J. (Ottó)" wrote: > I have done a little research among distributions, to have a bigger > perspective, and based on that, I have some ideas and questions. More > important ones first: > > * OpenSUSE should log auth and authpriv messages separately (like > "all" other distributions do). > > We certainly can not start a great debate on what to log and where, > but I would like to mention some other points too: > > * OpenSUSE does not log crond … [View More]

1 0

[opensuse-factory] Re: [opensuse-buildservice] Can we please get ARM builds for 11.3+1?
by Jimmy Pierre 02 Jul '10

02 Jul '10

>>Naming of the next release is a separate discussion we might have. I'm opposed to both 11.4 and 12.0 and look forward to great proposals openSUSE 2.0 ? -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

1 0

[opensuse-factory] Name for next release [WAS: Re: [opensuse-buildservice] Can we please get ARM builds for 11.3+1?]
by Greg Freemyer 02 Jul '10

02 Jul '10

On Fri, Jul 2, 2010 at 11:05 AM, Andreas Jaeger <aj(a)novell.com> wrote: > On Friday 02 July 2010 16:56:04 Thomas Schmidt wrote: > >> Shouldn't we call this 12.0? >> Reassigning the features afterwards would be additional work. > > Naming of the next release is a separate discussion we might have. I'm > opposed to both 11.4 and 12.0 and look forward to great proposals, > > Andreas "Armchair", because working with the next openSUSE release will be so … [View More]

1 0

[opensuse-factory] pulse audio: pavucontrol - _still_ missing icons on KDE4 desktop
by madworm_de.novell＠spitzenpfeil.org 02 Jul '10

02 Jul '10

Same as: http://bugzilla.novell.com/show_bug.cgi?id=555600 Installed from: openSUSE-KDE-LiveCD-Build0694-i686.iso Are those icons just missing or is it a dependency problem? There's got to be 2 icons sitting somewhere waiting to be used. R. -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

1 0

[opensuse-factory] perl_bootloader
by Günther J. Niederwimmer 02 Jul '10

02 Jul '10

Hello, is this a known problem Warning: GRUB::GrubDev2UnixDev: No partition found /dev/md126 with 12627? I installed a fresh RC2 in a Intel Raid1 System, I installed before WIN7 on this system. By installing, a message for Intel Matrix System is popup, I say yes to the question, Install. -- mit freundlichen Grüßen / best Regards, Günther J. Niederwimmer -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

2 1

[opensuse-factory] build 694 results in rc1
by Dale Ritchey 02 Jul '10

02 Jul '10

I downloaded openSUSE11.3 rc2 from software.opensuse.org: Download openSUSE 11.3 RC2 <http://software.opensuse.org/developer/en> checked the md5sum 82bec376aa27e622a2c01cec531dddd9 /dist/install/openSUSE-11.3-RC2/iso/Build0694/openSUSE-DVD-Build0694-i586.iso did a isohybrid openSUSE-DVD-Build0694-i586.iso dd to usb stick installed from stick and the result was openSUSE 11.3rc1 reguiring a multi gig update to get to rc2?? Dale Intel Atom n270 … [View More]

1 0

[opensuse-factory] Critical RC2 bug: quitting quadrapassel kills x-server
by Atri Bhattacharya 02 Jul '10

02 Jul '10

Hi! Could someone test this bug https://bugzilla.novell.com/show_bug.cgi?id=617651 with Gnome in RC2 and confirm if he/she can see it regularly too? Also I don't understand clearly what a "shipstopper" means, but if this crash is indeed so clearly reproducible and brings down X every time, would this be a shipstopper? Thanks -- Atri -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

5 7

[opensuse-factory] Unable to launch Firefox after upgrade to 3.6.6
by Rastislav Krupanský 02 Jul '10

02 Jul '10

Hi all. I can´t launch Firefox after upgrade to 3.6.6-1.2 in RC2 from Mozilla repository. Command line gives me output: Couldn´t load XPCOM Could you please verify, whether it works for you after upgrade and it´s worth filling a bug? Thanks a lot. -- S pozdravom / Best regards, Rasto -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

3 3

Re: [opensuse-factory] Two Huawei modems fail the same way
by Bin Li 02 Jul '10

02 Jul '10

HI, So does each one works fine lonely? >>> Vahis 06/30/10 2:22 AM >>> I have Two Huawei sticks, E169 and E160. Both work fine in 11.2 (already got them to work in 11.0) When plugged into 11.2 VBox host they both work fine, both in XP and W7 guests. But in 11.3 factory guest they both fail. Here's a few lines from messages: ***************************** Jun 29 20:50:59 a88-112-18-38 kernel: [ 7712.604386] usb 1-1: new high speed USB device using ehci_hcd and address 6 … [View More]Jun 29 20:50:59 a88-112-18-38 kernel: [ 7712.852392] usb 1-1: New USB device found, idVendor=12d1, idProduct=140c Jun 29 20:50:59 a88-112-18-38 kernel: [ 7712.852396] usb 1-1: New USB device strings: Mfr=3, Product=2, SerialNumber=0 Jun 29 20:50:59 a88-112-18-38 kernel: [ 7712.852408] usb 1-1: Product: HUAWEI Mobile Jun 29 20:50:59 a88-112-18-38 kernel: [ 7712.852417] usb 1-1: Manufacturer: HUAWEI Technology Jun 29 20:50:59 a88-112-18-38 kernel: [ 7712.864049] option 1-1:1.0: GSM modem (1-port) converter detected Jun 29 20:50:59 a88-112-18-38 kernel: [ 7712.864286] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB0 Jun 29 20:50:59 a88-112-18-38 kernel: [ 7712.864501] option 1-1:1.1: GSM modem (1-port) converter detected Jun 29 20:50:59 a88-112-18-38 kernel: [ 7712.864568] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB1 Jun 29 20:50:59 a88-112-18-38 kernel: [ 7712.864736] option 1-1:1.2: GSM modem (1-port) converter detected Jun 29 20:50:59 a88-112-18-38 kernel: [ 7712.864831] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB2 Jun 29 20:50:59 a88-112-18-38 kernel: [ 7712.865836] option 1-1:1.3: GSM modem (1-port) converter detected Jun 29 20:50:59 a88-112-18-38 kernel: [ 7712.866321] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB3 Jun 29 20:50:59 a88-112-18-38 kernel: [ 7712.868435] scsi270 : usb-storage 1-1:1.4 Jun 29 20:50:59 a88-112-18-38 kernel: [ 7712.873061] scsi271 : usb-storage 1-1:1.5 So they get recognized, but then there's a problem, this comes first: Jun 29 20:51:00 a88-112-18-38 modem-manager: (Huawei): (ttyUSB2) deferring support check Jun 29 20:51:00 a88-112-18-38 modem-manager: (Huawei): (ttyUSB3) deferring support check Jun 29 20:51:00 a88-112-18-38 modem-manager: (Huawei): (ttyUSB1) deferring support check Then this: Jun 29 20:51:00 a88-112-18-38 udevd-work[23391]: exec of program '/lib/udev/' failed Jun 29 20:51:00 a88-112-18-38 udevd-work[23394]: exec of program '/lib/udev/' failed Jun 29 20:51:00 a88-112-18-38 udevd-work[23393]: exec of program '/lib/udev/' failed Jun 29 20:51:00 a88-112-18-38 udevd-work[23396]: exec of program '/lib/udev/' failed Jun 29 20:51:01 a88-112-18-38 udevd-work[23405]: exec of program '/lib/udev/' failed So they get recognized but they "defer support check". Apparently because "udev fails". Unfortunately I haven't tried them between 11.2 and current factory so I don't know if this has been there all the way thru milestones, sorry for that. Any ideas anybody? Vahis -- http://waxborg.servepics.com openSUSE 11.2 (x86_64 2.6.31.12-0.2-default 21:15pm up 17 days 5:47, 12 users, load average: 0.64, 0.29, 0.28 -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org [View Less]

2 2

[opensuse-factory] RFT: upgrade from 11.2 to M7 via wagon
by Greg Freemyer 01 Jul '10

01 Jul '10

All, in addition to "zypper dup", "yast2 wagon" is a supported dist upgrade path. (Or it was for 11.1 to 11.2) I don't have a 11.2 machine I want to move to factory right now, so I tried to upgrade a test machine from M3 to M7 via "yast2 wagon" and it segfaulted half way thru. (wagon is a gui tool to handle "yast2 dup") see http://en.opensuse.org/Wagon https://bugzilla.novell.com/show_bug.cgi?id=613820 The wagon version from 11.3 M3 first upgraded itself to M7 and then started the actual … [View More]

1 1

[opensuse-factory] openSUSE 11.3 RC2 is now available
by Bryen M. Yunashko 01 Jul '10

01 Jul '10

Folks, openSUSE 11.3 RC2 is now available for download at [1]. This is our last and final check before we release openSUSE 11.3 Final on 15 July 2010. Let's make this final push a great one and get ready for a great release! Our most annoying bugs is listed here [2] Please do download, test it out and report any bugs to us so we can have a smooth landing on July 15th. Thanks, Bryen M Yunashko openSUSE Board Member openSUSE Marketing Team lead [1]Download at http://software.opensuse.org/… [View More]

1 0

[opensuse-factory] video dvd authoring
by jdd 01 Jul '10

01 Jul '10

Hello, It look like no authoring dvd product works with present factory * kdvd don't works at all (it's the only working app in 11.2) * deVeDe ask for spumux that is not available anywhere (and should not be required, as it's only for subtitles) * no "todisk" is availalble (nor, of course gtodisk) and on 11.2 fails with "no mp2enc nor mpeg2enc" jdd -- http://www.dodin.net http://www.facebook.com/pages/I-support-the-Linux-Documentation-Project/372… http://www.facebook.com/pages/The-fan-… [View More]

4 8

[opensuse-factory] linux login: FIBMAP: Invalid argument
by Felix Miata 01 Jul '10

01 Jul '10

This appears on tty1 when fresh RC1 installation boot to runlevel 3 has completed. Why? -- "The wise are known for their understanding, and pleasant words are persuasive." Proverbs 16:21 (New Living Translation) Team OS/2 ** Reg. Linux User #211409 Felix Miata *** http://fm.no-ip.com/ -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

2 1

Main

Development

Information

Community

Social Media

Other

openSUSE Factory