May 2008 - openSUSE Factory - openSUSE Mailing Lists

[opensuse-factory] Update from 9.2
by Joachim Reichelt 13 May '08

13 May '08

Hi, I have trouble updating from 9.2 to 11.0 Beta2: a lots of errors during the update, I have to press "Ignore" to go on. Reason told by the SW: insserver: There is a loop between cupsd and smbfs ... insserver: There is a loop between smbfs and smb smbfs is from 9.2! (/etc/init.d/smbfs dated 2004-11-11) -- Joachim --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

2 3

[opensuse-factory] Opensuse 11 Beta 2 fails to install
by Juan Erbes 13 May '08

13 May '08

I'm using in my computer Opensuse 10.3, 64 and 32 bits without problems, and yesterday I would to upgrade the 64 bits partition to Opensuse 11 Beta 2, and it fails to detect the SATA hard disk because the ahci driver do'nt loads right. In Opensuse 10.3 the bios is set to "IDE Native", and it was the same if the bios is set to AHCI, but because for other OS compatibility, I must set it to "IDE Native". I do'nt remember the parameter that I used for installing 10.3 at boot time for the install. I mean it was "pci=nomsi", and the chipset is ATI SB600. For Opensuse 11 Beta 2, I must use the same parameter? Thanks --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

1 0

[opensuse-factory] repair system with dev mapper and lvm
by Putrycz, Erik 13 May '08

13 May '08

My dell precision 390 has a intel raid controller and I never fully understood how this work with linux but it seems that the device mapper and lvm are necessary to use the raid controller. Otherwise the two drives show as /dev/sda and /dev/sdb. Normally, they show as a single in /dev/mapper/... However when I boot beta2 and launch repair, I never figured out a way to get the dev/mapper working, the tool only tries to repair and mount the /dev/sda and /dev/sdb. Is there any way to enable device mapper and lvm on the repair? Thanks, Erik. --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

3 2

[opensuse-factory] cups an sane in 11.0
by ralf.prengel＠comline.de 13 May '08

13 May '08

Hallo, I ve to plan a migration of a cups and sane server (suse 10.1). My idea is to wait until the summer-hollidays here in germany and to make the big jump to 11.0. My questions: What are the big changes for cups and sane in 11.0? i.A. Ralf Prengel Customer Care Manager Comline AG Hauert 8 D-44227 Dortmund/Germany Fon +49231 97575- 904 Fax +49231 97575- 905 EMail ralf.prengel(a)comline.de www.comline.de Vorstand Stephan Schilling, Erwin Leonhardi Aufsichtsrat Dr. Franz Schoser (Vorsitzender) HR Dortmund B 14570 USt.-ID-Nr. DE 124727422 www.comline.de Vorstand Stephan Schilling, Erwin Leonhardi Aufsichtsrat Dr. Franz Schoser (Vorsitzender) HR Dortmund B 14570 USt.-ID-Nr. DE 124727422 --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

5 4

[opensuse-factory] pre-beta3 livecd testing
by Stephan Kulow 13 May '08

13 May '08

Hi, I created new live cds - and I was able to install a GNOME-i686, so I assume the rest works too :) http://ftp.suse.com/pub/projects/FactoryLiveCDs/ As usual: please remember that this is not beta3 and you should mention it's 20080509 in your bug report. Greetings, Stephan -- SUSE LINUX Products GmbH, GF: Markus Rex, HRB 16746 (AG Nürnberg) --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

2 1

[opensuse-factory] Feedback for Announcing openSUSE 11.0 Beta 2
by Jan Engelhardt 12 May '08

12 May '08

>http://news.opensuse.org/2008/05/03/announcing-opensuse-110-beta-2/ >Discussion and feedback is very welcome as well; the most appropriate >place is the opensuse-factory(a)opensuse.org (subscribe) mailing list. Regarding the three pictures, I think the 2nd and 3rd should use more white (as in the 1st), giving it a lightgray appearance instead of darkgray. Also, the 2nd shot should probably be with 16M colors, not 256, because with 256 the radial stepping looks horrible :p --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

1 0

[opensuse-factory] Beta3
by Stephan Kulow 12 May '08

12 May '08

Hi, Just to inform you: there is a bad bug in the 11.0 roadmap. It says beta3 would be releaed on tuesday. This is of course impossible as monday is a public holiday in germany. So it will not be release before thursday. Greetings, Stephan --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

3 2

[opensuse-factory] Bug 387148 - Can't refresh the factory repo
by Stephan Kulow 12 May '08

12 May '08

Hi, To make it short: I know :) Greetings, Stephan -- SUSE LINUX Products GmbH, GF: Markus Rex, HRB 16746 (AG Nürnberg) --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

11 17

Re: [opensuse-factory] vmware server modules can not be build
by Willem Meens 11 May '08

11 May '08

Hi there, There is a new vmware-any-any-update117 out that should let you build on opensuse. Quoted from suseforums.net; -- Ok... Tested and have VMWare Workstation 6.0.3 up and running on openSUSE 11 beta2 & kernel 2.6.25 What should work: make sure you have these packages installed: - kernel-source - make - gcc - gcc ++ (!) 1) install the VMware-workstation-6.0.3-80004.i386.rpm (or by using the vmware install script found in the tar version). ** do NOT run the vmware-config.pl script yet! ** 2) Download , unpack vmware-any-any-117 (earlier versions won't work!) found here : http://download.rsbac.org/tmp/vmware-any-any-update117.tar.gz <- correct patch for openSUSE 11 (at least it's working here). 3) cd into the vmware-any-any directory and run (as root) the runme.pl when asked to run vmware-config answer yes There are some warnings (like gcc being of a different version) but the modules should build fine. * If you are using an existing VM's reinstall the vmware tools in it - it's been reported to fix sluggishness problems. Hope it helps, Wj -----Oorspronkelijk bericht----- Van: Ralf Prengel [mailto:ralf.prengel@comline.de] Verzonden: woensdag 7 mei 2008 15:05 CC: opensuse-factory(a)opensuse.org Onderwerp: Re: [opensuse-factory] vmware server modules can not be build Christoph Thiel schrieb: > On Tue, May 06, 2008 at 08:29:20PM +0200, Ralf Prengel wrote: > >> the last vmware-any-any-patch I ve is version 1.16. >> Is there an newer on for running vmware-server using suse 11? > > Could you please be more verbose on this issue? Where does the build fail? --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

1 0

[opensuse-factory] Weird issue with Beta 2
by Stelian Iancu 11 May '08

11 May '08

Hi all, I have just installed Beta 2 and I have an issue with the software installer. I have deleted the openSUSE 11 DVD installation source and enabled all the others that were in the list. However, now when I go to Software Management in Yast, I get the following error: There was an error in the repository initialization. 'http://download.opensuse.org/distribution/SL-OSS-factory/inst-source/': Failed to cache repo (4). History: - repo2solv.sh "/var/cache/zypp/raw/http:__download.opensuse.org_distribution_SL-OSS-factory_inst-source_" > "/var/cache/zypp/solv/http:__download.opensuse.org_distribution_SL-OSS-factory_inst-source_/solv" Bad dependency line: =Prq: # gzip: stdout: Broken pipe Any idea what might be the cause? Is this a bug? Regards, Stelian Iancu --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

3 2