September 2007 - openSUSE Factory - openSUSE Mailing Lists

Re: [opensuse-factory] Oo needs Gstreamer in RC1, which is not in the factory-repo?
by Jan Kupec 21 Sep '07

21 Sep '07

M9. wrote: > Jan Kupec schreef: >> The problem is the newer version of gstreamer in the packman repository. >> You can resolve it in YaST (also during installation) by manually >> selecting the version of gstreamer from factory in the Versions tab. > >> You will probably not be able to resolve this with zypper, maybe by >> disabling the packman repo for that update. > >> I wonder if the solver should propose the version change which would >> lead to the resolution. Schubi? > > It is impossible to do the upgrade by Yast, the option is not there, and It should be, i was able to do it. I closed the package dependency resolution window, searched for gstreamer, clicked the one marked for upgrade, clicked the Versions tab, selected the version from factory/DVD - the dependecny problems did not appear anymore after that and i was able to do the upgrade. > more disturbing: The installation-oversight window is empty, so there is > no option to change the version of a pkg. Which window? > I tried the same upgrade with smart, without using the packman repo. > After it had downloaded all the pkgs: 1008MB, it came to the same > conclusion. > That is why i thought to include it in zypper... ;-) Hmm.. puzzling :O) Without using the packman repo, it should work with zypper. j. --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

2 2

[opensuse-factory] Are there any tools in opensuse to download the src rpm?
by James Li 21 Sep '07

21 Sep '07

smart/rug/yast2/apt/yum or other tools? Thanks --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

7 9

[opensuse-factory] Problem with WLAN
by Erik Jakobsen 21 Sep '07

21 Sep '07

Hi. Just installed the 10.3 RC1 b4 I used 10.3 Beta3 With that I had my old DLINK DWL-610 wlan pcmcia to work with aid of ndiswrapper: And the dmesg showed this: Output of dmesg: ndiswrapper version 1.47 loaded (smp=yes) ndiswrapper: driver net8180 (Realtek,10/07/2004,5.173.1007.2004) loaded PCI: Enabling device 0000:06:00.0 (0000 -> 0003) PCI: Setting latency timer of device 0000:06:00.0 to 64 ndiswrapper: using IRQ 11 wlan0: ethernet device 00:05:5d:97:d3:0a using NDIS driver: net8180, version: 0x500aa, NDIS version: 0x500, vendor: 'Realtek RTL8180 Wireless LAN (Mini-)PCI NIC ', 1186:3300.5.conf wlan0: encryption modes supported: WEP; TKIP with WPA; AES/CCMP with WPA usbcore: registered new interface driver ndiswrapper With the same install under 10.3 RC1 I have this: ndiswrapper version 1.47 loaded (smp=yes) ndiswrapper: driver net8180 (Realtek,10/07/2004,5.173.1007.2004) loaded PCI: Enabling device 0000:06:00.0 (0000 -> 0003) ACPI: PCI Interrupt 0000:06:00.0[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:06:00.0 to 64 ndiswrapper (NdisWriteErrorLogEntry:192): log: C0001389, count: 1, return_address: ccb6aaa0 ndiswrapper (NdisWriteErrorLogEntry:195): code: 0x401 ndiswrapper (mp_init:216): couldn't initialize device: C0000001 ndiswrapper (pnp_start_device:439): Windows driver couldn't initialize the device (C0000001) ndiswrapper (mp_halt:258): device c0ef8500 is not initialized - not halting ndiswrapper: device eth%d removed ACPI: PCI interrupt for device 0000:06:00.0 disabled ndiswrapper: probe of 0000:06:00.0 failed with error -22 usbcore: registered new interface driver ndiswrapper ISO 9660 Extensions: Microsoft Joliet Level 3 ISO 9660 Extensions: RRIP_1991A What could be the problem, and should I file a bugreprt ? -- Med venlig hilsen / Best regards Erik Jakobsen erik_ja(a)mail.tele.dk openSuSE 10.2 (i586) --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

1 0

[opensuse-factory] codecs in 10.3?
by Peter Czanik 21 Sep '07

21 Sep '07

Hello, Just finished installing RC1 on PPC. I remembered to see something like 'opensuse-codecs-installer' in changelog, so tried to check, if it means proper mp3 support in 10.3. First experience: I installed GNOME for a test. First tried banshee, did not start. Then totem, but the same. Starting them from the command line shows an ugly loud crash for both applications. Second: installed KDE, as I usually do. Opened the mp3 file with kaffeine. First I got a dialog box, if I want to install a suitable codec. When answering 'yes', I got two pages opened, one for mp3 and a second one for xvid. Both of them explained that I wanted to open an unsupported media file, but nothing more. Question: what is the status of codec support? Do I see useless pages, because no content is yet there, or because PPC is not supported? (I have yet to install on x86) Bye, CzP --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

4 4

Re: [opensuse-factory] codecs in 10.3?
by Aaron Bockover 21 Sep '07

21 Sep '07

The Fluendo codecs only target GStreamer. You should have support in Banshee, Totem, and possibly Amarok, if you are using the GStreamer engine. --Aaron On Thu, 2007-09-20 at 15:51 +0200, Peter Czanik wrote: > Hello, > > JP Rosevear wrote: > > Both start perfectly fine here. We have no bug reports about them > > crashing on start up. Please file with a trace if you can replicate > > them. > > > OK, I'm doing now another install but will make reports as soon as I'm > finished. > > >> Question: what is the status of codec support? Do I see useless pages, > >> because no content is yet there, or because PPC is not supported? (I > >> have yet to install on x86) > >> > > I believe its because the content is not finished there yet. This is > > what you would go to as part of both GNOME and KDE via gstreamer. > > > Content is now there, just after I sent my e-mail ;-) I downloaded the > fluendo plugin, installed as suggested in the documentation, but mp3 is > still not played by kaffeine, I keep getting the dialog, if I want to > search for plugins... > Bye, > CzP > --------------------------------------------------------------------- > To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org > For additional commands, e-mail: opensuse-factory+help(a)opensuse.org > Novell, Inc. Software for the Open Enterprise™ http://www.novell.com --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

4 3

[opensuse-factory] rc1 and via-rfhine
by jdd 21 Sep '07

21 Sep '07

Hello, I have a mobo K7VT6 with Asrock network, configured through dhcp and via-rhine module. works perfectly in 10.1 I install 10.3 RC1 by upgrade of older alpha (3 I think) when I need to configure the net, Yast detects the card and see it "unconfigured" I hit "configure", dhcp, ok... and the network don't works if I go back to Yast, I can see the line for asrock is still "unconfigured", and there is an other line below, exactly the same, but noted "dhdp" notice that I have also an other net card in the computer (neither configured neither tried) idea? jdd -- http://www.dodin.net --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

2 1

[opensuse-factory] My comments on installing openSUSE-10.3-RC1 on a ThinkPad T40
by James PEARSON 21 Sep '07

21 Sep '07

Hello all I installed openSUSE-10.3-RC1 on a ThinkPad T40 using the openSUSE-10.3-RC1-DVD-i386.iso that I made from the openSUSE-10.3-Beta3_RC1-DVD-i386.delta.iso The installation went fine but I do have a few remarks which I would like to pass along The yast install picked up the Intel 2200BG Wifi card and I used that to load down and install the patchs during the install process. Wifi worked just fine during and after the install (To be truthfull, I had more problems configuring 2200BG Wifi card using Intel lastest drivers under Win XP than with openSUSE). Great work! During the installation my thinkpad model was incorrectly recognized as an "R40 2681" The thinkpad model is ThinkPad "T40 2373" This is the first time that I have seem yast install mistake the model. There was an rather annoying "PatchProgressCallback.99" message popup when I was in the "Patch download and Installation" window that I had to click too many times for my liking. I imagine that this is for your developpers to debug / troubleshoot yast installation module code and it won't there for long. Lastly the sound was recognized as a T41 in the "Hardware window" at the end - no big deal I guess as the sound works fine but before is the first time that I have seem yast install mistake the model. Final remarks - Things are looking quite good - The wifi connection (controlled by KNetwork manager as eth0) seems to up faster "on boot" than before (<=thank you) - I have an new semi transparent kde panel toolbar - cool eye candy (<=thank you) - Konqueror and Firefox seem to open alot faster under kde. And now Firefox opens really fast the second time (<=thank you) - I installed the w32codec-all-20061022-0.pm.1.i586.rpm libdvdcss2 and libdvdcss2-devel but I still can't Kaffeine to play movies. Can any one help me on this one ? That's all I have time for for tonight. Regards James --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

3 2

[opensuse-factory] Oo needs Gstreamer in RC1, which is not in the factory-repo?
by M9. 21 Sep '07

21 Sep '07

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, Might it be possible that they are not uploaded, or is it something else? Open office deps are not fullfilled... I was not able to copy the exact missing pkgs, no right mouse menu, no ctrl+a, ctrl+c worked so.. - -- Have a nice day, M9. Now, is the only time that exists. OS: Linux 2.6.22.5-10-default x86_64 Huidige gebruiker: monkey9@tribal-sfn2 Systeem: openSUSE 10.3 (X86-64) Beta3 KDE: 3.5.7 "release 58" -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.4-svn0 (GNU/Linux) Comment: Using GnuPG with SUSE - http://enigmail.mozdev.org iD8DBQFG8oaEX5/X5X6LpDgRAp3QAJ4yx0WTXrkX6G7zyx+vTPMPcnnf9gCgl8/A B9QdFhyfM5MFRBBhVb781AQ= =Arx/ -----END PGP SIGNATURE----- --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

2 3

[opensuse-factory] bug using sprof?
by Christian Keil 20 Sep '07

20 Sep '07

Hi, I'm struggling to get sprof to run, starting to believe there's a bug somewhere. I'm posting this here because I didn't find any mention searching the web and checking two other computers, sprof works under SUSE 10.0 but fails on another openSUSE 10.2. I'm running openSUSE 10.2, the output of uname -a: Linux psi 2.6.18.8-0.5-default #1 SMP Fri Jun 22 12:17:53 UTC 2007 i686 i686 i386 GNU/Linux When collecting profile info with LD_PROFILE=libc.so.6 LD_PROFILE_OUTPUT=. ls and afterwards trying to display the profile with sprof libc.so.6 returns sprof: failed to load shared object `libc.so.6': No such file or directory Investigating with ltrace turns up the following: ltrace sprof libc.so.6 __libc_start_main(0x804a7f0, 2, 0xbfe078a4, 0x804b980, 0x804b970 <unfinished ...> setlocale(6, "") = "" textdomain("") = "" argp_parse(0x804e0d0, 2, 0xbfe078a4, 0, 0xbfe07808) = 0 strchr("\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377"..., '/') = "\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377"... strlen("\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377"...) = 9 strcpy(0xbfe07672, "libc.so.6") = 0xbfe07672 dlopen("\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377"..., 1073741825) = NULL dlopen("\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377"..., 1073741825) = NULL __dcgettext("failed to load shared object `%s"..., "failed to load shared object `%s"..., 5) = "failed to load shared object `%s"... __errno_location() = 0xb7df968c error(0, 2, 0x804bd94, 0xbfe07cee, 0xb7f696f8sprof: failed to load shared object `libc.so.6': No such file or directory ) = 0 exit(1 <unfinished ...> +++ exited (status 1) +++ So somehow, somewhere it seems to destroy the name of the so. Is this a bug in openSUSE's libc? Shall I post this to the glibc mailinglist? Cheers, Christian -- Christian Keil /"\ Institute for Reliable Computing \ / ASCII Ribbon Campaign Hamburg University of Technology X against HTML email & vCards mail:c.keil@tu-harburg.de / \ --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

3 2

[opensuse-factory] ata disk limited to 8GB on Thinkpad R50p
by Andreas Vetter 20 Sep '07

20 Sep '07

Hi, RC1 limits the harddisk in my Thinkpad R50p to 8GB. hdparm shows the same amount of sectors for CHS and for LBA. As a result I don't see my extended partitions. -- Andreas Vetter Fakultaet fuer Physik und Astronomie Universitaet Wuerzburg --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

1 1