September 2007 - openSUSE Factory - openSUSE Mailing Lists

Re: [opensuse-factory] /etc/init.d
by Donn Washburn 24 Sep '07

24 Sep '07

Sid Boyce wrote: > Donn Washburn wrote: >> Hey Group; >> >> SuSE 10.3 Beta2 >> lpq sees a print job waiting. lprm will remove so cups seems to be OK > lpd? Check you haven't selected lpd in YaST as cups is used exclusively. > LPD is there as an option to connect to remote servers that don't > support IPP. > Sid spotted my Senior Moment problem. Not lpd but "cups" and it is there. Both in /etc/init.d/rc3.d and ../cups. Proof you cannot trust what you read. The README is broken! As they say --- Never Mind! By the way cups is selected in that run level as S11cups. ps ax | grep cups output is included but still no printing. -- 73 de Donn Washburn 307 Savoy Street Email: " n5xwb(a)hal-pc.org " Sugar Land, TX 77478 LL# 1.281.242.3256 Ham Callsign N5XWB HAMs : " n5xwb(a)arrl.net " VoIP via Gizmo: bmw_87kbike / via Skype: n5xwbg BMW MOA #: 4146 - Ambassador " http://counter.li.org " #279316 1455 tty1 S 0:00 /tmp/cups-root/bin/notifier/testnotify testnotify:// 2833 tty2 R+ 0:00 grep cups 3312 ? Ss 0:00 /usr/sbin/cupsd 11083 tty1 S 0:15 ../scheduler/cupsd -c /tmp/cups-root/cupsd.conf -f 11103 tty1 S 0:00 /tmp/cups-root/bin/notifier/testnotify testnotify:// 18162 tty1 S 0:00 /tmp/cups-root/bin/notifier/testnotify testnotify:// 22336 ? S 0:00 /usr/bin/perl /usr/lib/cups/filter/foomatic-rip 16 donn RAID Information - Linux RAID-5 Algorithms 1 job-uuid=urn:uuid:88d6ec26-0151-3d39-54eb-1d10ac6d784e 22341 ? S 0:00 /usr/bin/perl /usr/lib/cups/filter/foomatic-rip 16 donn RAID Information - Linux RAID-5 Algorithms 1 job-uuid=urn:uuid:88d6ec26-0151-3d39-54eb-1d10ac6d784e 22342 ? S 0:00 /usr/bin/perl /usr/lib/cups/filter/foomatic-rip 16 donn RAID Information - Linux RAID-5 Algorithms 1 job-uuid=urn:uuid:88d6ec26-0151-3d39-54eb-1d10ac6d784e

2 1

[opensuse-factory] /etc/init.d
by Donn Washburn 23 Sep '07

23 Sep '07

Hey Group; SuSE 10.3 Beta2 I use runlevel 3 just for info. I have recently had a problem with my printer which was found readily by Yast2. The problem is that every time I go to print I needed to run Yast2. I think I have found the problem. In /etc/init.d/rc3.d there is mentioned in the README a S20lpd linked to ../lpd. But there is no ../lpd script. The README mentions "/etc/init,d/lpd start" and "/etc/init,d/lpd stop" but there is no lpd script. lpq sees a print job waiting. lprm will remove so cups seems to be OK -- 73 de Donn Washburn 307 Savoy Street Email: " n5xwb(a)hal-pc.org " Sugar Land, TX 77478 LL# 1.281.242.3256 Ham Callsign N5XWB HAMs : " n5xwb(a)arrl.net " VoIP via Gizmo: bmw_87kbike / via Skype: n5xwbg BMW MOA #: 4146 - Ambassador " http://counter.li.org " #279316 Did you know? The transistor was invented by three white men. --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

3 3

Re: [Fwd: Re: [opensuse-factory] xen on 10.3-B3]
by Stephen Shaw 23 Sep '07

23 Sep '07

>>> Peter Sjoberg <peters-opensuse(a)techwiz.ca> 09/19/07 7:18 PM >>> >On Tue, 2007-09-18 at 00:00 +0200, Hans Witvliet wrote: >> Anybody on the list trying xen on 10.3-B3? >I have a same/similar problem >I downloaded the 10.3 x86_64bit dvd and was going to add a new domU on >my 10.2 system but nothing seems to work. >I have a OpenSuse 10.2 x86_64 AMD AM2 system running xen. Installing >10.2 domU works ok when done over network or iso image but I can't even >get the install to start when trying 10.3 beta 3. Your first problem is that you are using beta3. :( There were some problems with the install, beta 3 plus clean that up some. RC1 seems to be working ok. I haven't done tons of testing on it yet, but haven't run into any problems. Did a few amount on beta3 plus and that seemed to be ok. Note: HVM opensuse guests do not work. I believe it has something to do with isolinux Help that helps. Stephen Shaw PS. There is also a #opensuse-xen channel on freenode. I try to hang out there as much as possible, but do read passed messages. --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

3 2

[opensuse-factory] corrupted packages in 1-CD KDE RC1
by Gregg Nicholas 23 Sep '07

23 Sep '07

I've tried a clean installation from the 1-CD KDE for 10.3 RC1. Five packages are broken on the CD (classpath, aspell, aspell-en, cyrus-sasl, amarok). Somebody else must've run into this, but I just can't find the bugzilla report. Told the install routine to ignore those 5 problems, but then I hit this error: "The root password could not be set. You might not be able to log in. Try setting it again? [Yes/No]" Can't do anything that requires root password. Why is bluetooth enabled on machines without any bluetooth hardware? ....Gregg --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

2 3

[opensuse-factory] RC1 i386 Installation
by Keith Goggin 23 Sep '07

23 Sep '07

1. During installation 'add online repositories before installation' should NOT in my opinion be the default. It causes more trouble than it's worth and takes far too long to complete. Adding repositories after installation is a much faster and cleaner process. 2. The installation process did not ask for or set the network Default Gateway. 3. Literally hundreds of the following message had to be acknowledged. 'Patch Process Callback nn' 4. Replying OK to the message requesting permission to perform a reboot after an online update did not initiate the reboot. --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

9 15

[opensuse-factory] couldn't launch gnome-settings-daemon after update to RC1
by Gabriel . 23 Sep '07

23 Sep '07

I managed to update from 10.2 to 10.3 RC1, now, every time I log in a get an error that the gnome-settings-daemon cannot start. I attached an screenshot. By the way, I noticed that some kde packages was installed, even though I had installed just gnome (I think there are packages from kde3base, ksysguard, kconsole, etc)

5 7

[opensuse-factory] EVMS in 10.3
by James Oakley 23 Sep '07

23 Sep '07

According to https://bugzilla.novell.com/show_bug.cgi?id=224462 , EVMS installation was disabled in 10.2 and was to be reenabled in 10.3. I'd like to try it in RC1, but it is apparently still not enabled. Is there any way I can enable it myself? -- James Oakley jfunk(a)funktronics.ca --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

2 2

[opensuse-factory] 10.3 RC1 installation - (Second) hard disc seen as wrong size
by Richard (MQ) 23 Sep '07

23 Sep '07

Trying to do a 'new installation' of 10.3 RC1 on my primary test machine, for these tests I use a second 10GB HD sdb (first HD sda has 10.2 and 'another' OS on it). First time round, installer complained it couldn't read partition table (which was created a few weeks ago by a 10.3 Beta installation) - attempting to select manually using 'expert partitioning' YaST informed me it was only 4.3GB Exit & re-boot, BIOS also says 4.3G! so power off and on again and it's back to 10G (which is what it IS). Try again after using fdisk to delete partitions - no complaint from YaST but we're back to 4.3G. I'm trying to continue but suspect that once power is cycled it will be very unhappy. 4.3GB looks suspiciously like 2**32 bytes - maybe a bug where something uses ulong where it needs more bits? Anyone else see this? -- Richard (MQ) --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

3 7

[opensuse-factory] Two Yast sessions in RC1
by Carlos E. R. 23 Sep '07

23 Sep '07

Hi,ç I don't know how, but the chair-keyboard interface got two yast sessions running, both trying an online update, and both failing complaining there was another program using the database. So far, "normal". The problem was trying to kill them both. One of them had to be forced kill, and revived: but with no display window in kde. I could see in top a "y2base" that I had to kill, but when I tried top complained there was no such pid; true enough, the pid had changed. Then I noticed that on almost each top refresh (2") the PID changed. Finally, via "ps afx" I discovered it's parent, yastonlinesomething, and killed that. Yast is running now alright. So... couldn't yast-online figure another yast-online was already running before starting, and exit with an informative message box? Now it discovers the problems when it fails to grab the rpm database, it seems. -- Cheers, Carlos E. R. (from RC1) --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

1 0

[opensuse-factory] Some issues after resume + laptop too loud
by Jaroslav Reznik 23 Sep '07

23 Sep '07

Hi, I have some troubles with suspend/resume on 10.3 RC1. 1.) Sometimes sound doesn't work after resume. Intel AC97 codec, module snd_intel8x0. Restart ALSA doesn't work for me, I have to run alsaconf to detect soundcard and restart sound. 2.) Cookies don't work in Konqueror after resume. I have to restart whole KDE. 3.) As I mentioned in discussion on OpenSUSE news site, my laptop is too loud with running 10.3 compared to 10.1 and Kubuntu Feisty. But temperature is even lower. It is Pentium-M running with dynamic CPU freq policy and ATI X700 set to low power (aticonfig --set-powerstate=1) but ventilator is still running. I'll try powertop in Kubuntu to compare it with 10.3. It is very annoying for me :( Regards R. --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

2 1