- openSUSE Factory

State of debuginfod.opensuse.org ?
by Michael Pujos 27 Apr '24

27 Apr '24

Any request to https://debuginfod.opensuse.org results in a 503 with a deprecation message. This makes gdb unable to retrieve debuginfo data automatically. If debuginfo cannot be used with debuginfod.opensuse.org for, maybe it would be best to change of remove /etc/debuginfod/elfutils.urls (from package debuginfod-profile) whose content is: https://debuginfod.opensuse.org/

7 7

New Tumbleweed snapshot 20240425 released!
by Dominique Leuenberger 26 Apr '24

26 Apr '24

Please note that this mail was generated by a script. The described changes are computed based on the x86_64 DVD. The full online repo contains too many changes to be listed here. Please check the known defects of this snapshot before upgrading: https://openqa.opensuse.org/tests/overview?distri=opensuse&groupid=1&versio… Please do not reply to this email to report issues, rather file a bug on bugzilla.opensuse.org. For more information on filing bugs please see https://en.opensuse.org/openSUSE:Submitting_bug_reports Packages changed: ImageMagick (7.1.1.30 -> 7.1.1.31) Mesa (24.0.3 -> 24.0.5) Mesa-drivers (24.0.3 -> 24.0.5) bind (9.18.25 -> 9.18.26) distribution-logos-openSUSE (20240404 -> 20240424) dotconf (1.3 -> 1.4.1) dracut-pcr-signature (0.3+5 -> 0.3+6) ffmpeg-4 ffmpeg-6 flatpak (1.15.6 -> 1.15.8) gdb gedit gnome-settings-daemon grub2 gtk2 gtk2-engine-murrine gtksourceview kwin6 (6.0.4 -> 6.0.4.1) libical (3.0.17 -> 3.0.18) libical-glib (3.0.17 -> 3.0.18) liblouis libva (2.20.0 -> 2.21.0) libva-gl (2.20.0 -> 2.21.0) libwacom (2.10.0 -> 2.11.0) mozilla-nss (3.98 -> 3.99) openSUSE-release (20240423 -> 20240425) pcre2 python-numpy python-pyarrow (15.0.2 -> 16.0.0) sbl sg3_utils (1.48+8.37ca384 -> 1.48+9.ecc03bb) virtualbox virtualbox-kmp vlc wireplumber (0.5.1 -> 0.5.2) yast2-trans (84.87.20240414.d73f60d6af -> 84.87.20240421.63804708b7) === Details === ==== ImageMagick ==== Version update (7.1.1.30 -> 7.1.1.31) Subpackages: libMagickCore-7_Q16HDRI10 libMagickWand-7_Q16HDRI10 - version update to 7.1.1.31 * Convert big PDF documents is slow #7263 * Update release.yml #7258 * Update README.md #7245 * uhdr.c: verify the availability of error message before accessing it #7229 - removed patches - ImageMagick-wmflite-detection.patch (upstreamed) ` ==== Mesa ==== Version update (24.0.3 -> 24.0.5) Subpackages: Mesa-libEGL1 Mesa-libGL1 Mesa-libglapi0 libgbm1 - Update to bugfix release 24.0.5 - supersedes mesa-fix-llvm18.patch - adjusted 0004-glx-pass-implicit-load-param-through-allocation.patch, 0010-glx-silence-more-implicit-load-zink-errors.patch ==== Mesa-drivers ==== Version update (24.0.3 -> 24.0.5) Subpackages: Mesa-dri Mesa-gallium Mesa-libva libxatracker2 - Update to bugfix release 24.0.5 - supersedes mesa-fix-llvm18.patch - adjusted 0004-glx-pass-implicit-load-param-through-allocation.patch, 0010-glx-silence-more-implicit-load-zink-errors.patch ==== bind ==== Version update (9.18.25 -> 9.18.26) Subpackages: bind-doc bind-utils - Update to release 9.18.26 New Features: * The statistics channel now includes counters that indicate the number of currently connected TCP IPv4/IPv6 clients. * Added RESOLVER.ARPA to the built in empty zones. Bug Fixes: * Changes to listen-on statements were ignored on reconfiguration unless the port or interface address was changed, making it impossible to change a related listener transport type. That issue has been fixed. * A bug in the keymgr code unintentionally slowed down some DNSSEC key rollovers. This has been fixed. * Some ISO 8601 durations were accepted erroneously, leading to shorter durations than expected. This has been fixed. ==== distribution-logos-openSUSE ==== Version update (20240404 -> 20240424) Subpackages: distribution-logos-openSUSE-Tumbleweed distribution-logos-openSUSE-icons - Update to version 20240424: * Aeon: Make light versions actually light ==== dotconf ==== Version update (1.3 -> 1.4.1) - removed empty useless %check section - Update to version 1.4.1 * fix possible buffer overflows in get_path and dotconf_get_next_line - fixed package group - added empty %check section (no unit tests in the project) ==== dracut-pcr-signature ==== Version update (0.3+5 -> 0.3+6) - Update to version 0.3+6: * Add UTF8 character set ==== ffmpeg-4 ==== Subpackages: libavcodec58_134 libavformat58_76 libavutil56_70 libpostproc55_9 libswresample3_9 libswscale5_9 - Address boo#1223070/CVE-2024-31578: add patch 0001-avutil-hwcontext-Don-t-assume-frames_uninit-is-reent.patch ==== ffmpeg-6 ==== Subpackages: libavcodec60 libavfilter9 libavformat60 libavutil58 libpostproc57 libswresample4 libswscale7 - Address boo#1223215/CVE-2023-49501: add patch 0001-avfilter-asrc_afirsrc-fix-by-one-smaller-allocation-.patch - Address boo#1223235/CVE-2023-49502: add patch 0001-avfilter-bwdif-account-for-chroma-sub-sampling-in-mi.patch - Address boo#1222730/CVE-2023-49528: add patches 0001-avfilter-af_dialoguenhance-fix-overreads.patch, 0001-avfilter-af_dialoguenhance-simplify-channels-copy.patch, 0001-avfilter-af_dialoguenhance-do-output-scaling-once.patch - Address boo#1223070/CVE-2024-31578: add patch 0001-avutil-hwcontext-Don-t-assume-frames_uninit-is-reent.patch - Address boo#1223085/CVE-2024-31582: add patch 0001-avfilter-vf_codecview-fix-heap-buffer-overflow.patch ==== flatpak ==== Version update (1.15.6 -> 1.15.8) Subpackages: flatpak-remote-flathub flatpak-selinux flatpak-zsh-completion libflatpak0 system-user-flatpak - disable parental controls for now by using '-Dmalcontent=disabled', to work around issues with xdg-desktop-portal - Update to version 1.15.8: + Security fixes: - Don't allow an executable name to be misinterpreted as a command-line option for bwrap(1). This prevents a sandbox escape where a malicious or compromised app could ask xdg-desktop-portal to generate a .desktop file with access to files outside the sandbox. (CVE-2024-32462, boo#1223110). + Other bug fixes: - Pass the -export-dynamic linker option as - Wl,-export-dynamic, fixing build failures with clang 18 and lld 18. - Fix a double-free when installation is cancelled. - Fix installed-tests failure with "FUSERMOUNT: unbound variable". - Changes from version 1.15.7: + New features: - Automatically remove obsolete driver versions and other autopruned refs. - --socket=inherit-wayland-socket. - Automatically reload D-Bus session bus configuration after installing or upgrading apps, to pick up any exported D-Bus services. + Bug fixes: - Don't parse <developer><name/></developer> as the application name. - Don't refuse to start apps when there is no D-Bus system bus available. - Don't try to repeat migration of apps whose data was migrated to a new name and then deleted. - Improve handling of mixed locales on systems with systemd-localed. - Improve display of ellipsized columns in wide terminals. - Make flatpak info -e look for extensions in all installations. - Fix warnings from newer GLib versions. - Always set the container environment variable. - Always let the app inherit redirected file descriptors. - In flatpak ps, add xdg-desktop-portal-gnome to the list of backends we'll use to learn which apps are running in the background. - Don't use WAYLAND_SOCKET unless given - -socket=inherit-wayland-socket. - Use fusermount3 if compiled with FUSE 3, overridable with - Dsystem_fusermount compile-time option. - Avoid leaking a temporary variable from /etc/profile.d/flatpak.sh into the shell environment. - Improve async-signal safety. - Fix various memory leaks. - Avoid undefined behaviour of signed left-shift when storing object IDs in a hash table. - Detect the correct gtk-doc when cross-compiling. - Detect the correct wayland-scanner when cross-compiling. - Documentation improvements. - Skip more tests when FUSE isn't available. - Updated translations. - Add libglnx.patch: fix meson function detection. - Switch build system to meson: + Add meson BuildRequires. + Switch configure/make_build/make_install macros to meson/meson_build/meson_install, preserving the configure parameters as close as possible: - -disable-silent-rules => obsoleted - -with-system-bubblewrap => -Dsystem_bubblewrap=bwrap - -with-curl => -Dhttp_backend=curl - Add pkgconfig(malcontent-0) BuildRequires: enable malcontent support. ==== gdb ==== - Maintenance script qa.sh: * Add PR31671 unresolved. * Add unresolved for yama ptrace_scope == 1. * Limit PR31648 unresolved to SLE-11. ==== gedit ==== Subpackages: gedit-lang python3-gedit - Add gedit-quickhighlight-gtksourcestyle-api.patch: adapt quickhighlight plugin for new libgedit-gtksourceview API. ==== gnome-settings-daemon ==== Subpackages: gnome-settings-daemon-lang - Update gnome-settings-daemon-bgo793253.patch to fix the build with gcc 14. ==== grub2 ==== Subpackages: grub2-i386-pc grub2-snapper-plugin grub2-systemd-sleep-plugin grub2-x86_64-efi grub2-x86_64-xen - remove deprecated file 20_memtest86+ * a similar file is provided by the package memtest86+ ==== gtk2 ==== Subpackages: gtk2-data gtk2-immodule-xim gtk2-lang gtk2-tools libgtk-2_0-0 - Add gtk2-gcc14.patch: fix build with gcc 14. ==== gtk2-engine-murrine ==== - Add murrine-missing-prototypes.patch: add missing prototypes. ==== gtksourceview ==== Subpackages: gtksourceview-lang libgtksourceview-3_0-1 typelib-1_0-GtkSource-3_0 - Add gtksourceview-gcc14.patch: fix assignment from incompatible pointer type. ==== kwin6 ==== Version update (6.0.4 -> 6.0.4.1) Subpackages: kwin6-lang kwin6-x11 libkwin6 - Update to 6.0.4.1: * New bugfix release - Changes since 6.0.4: * Fall back to breeze_cursors if neither configured nor default can be loaded * scene/workspacescene: don't check direct scanout candidates for a pixmap (kde#485639, kde#485730, kde#485712) ==== libical ==== Version update (3.0.17 -> 3.0.18) - update to 3.0.18: * Requires CMake v3.5.0 or higher * Escape ^ (U+005E) character in parameter values according to RFC 6868 * New CMake option LIBICAL_BUILD_EXAMPLES to disable building the examples * Should be able to use the project as a submodule * Built-in timezones updated to tzdata2024a ==== libical-glib ==== Version update (3.0.17 -> 3.0.18) - update to 3.0.18: * Requires CMake v3.5.0 or higher * Escape ^ (U+005E) character in parameter values according to RFC 6868 * New CMake option LIBICAL_BUILD_EXAMPLES to disable building the examples * Should be able to use the project as a submodule * Built-in timezones updated to tzdata2024a ==== liblouis ==== Subpackages: liblouis-data liblouis20 python3-louis - Add s390x-support.patch to fix issues with python bindings on big endian machines. (gh#liblouis/liblouis#1552, bsc#1198348) ==== libva ==== Version update (2.20.0 -> 2.21.0) Subpackages: libva-drm2 libva-wayland2 libva-x11-2 libva2 - update to 2.21.0: * va: Add allow_content_tools and force_intger_mv to AV1 enc * va: add VASurfaceAttribAlignmentSize * va: Re-add drm_state and fd checks to VA_DRM_GetDriverNames * va: export symbol vaGetLibFunc for Windows * va: Add PRIME3 defination and correct the value * va: add driver name map for new intel KMD xe * va: export symbol vaMapBuffer2 for Windows * va: add new interface vaMapBuffer2 for map operation optimization * va: Add VAConfigAttribEncMaxTileRows and VAConfigAttribEncMaxTileCols * va: fix handling when all wayland backends fail * va_trace:add return value trace for vaPutSurfaces ==== libva-gl ==== Version update (2.20.0 -> 2.21.0) - update to 2.21.0: * va: Add allow_content_tools and force_intger_mv to AV1 enc * va: add VASurfaceAttribAlignmentSize * va: Re-add drm_state and fd checks to VA_DRM_GetDriverNames * va: export symbol vaGetLibFunc for Windows * va: Add PRIME3 defination and correct the value * va: add driver name map for new intel KMD xe * va: export symbol vaMapBuffer2 for Windows * va: add new interface vaMapBuffer2 for map operation optimization * va: Add VAConfigAttribEncMaxTileRows and VAConfigAttribEncMaxTileCols * va: fix handling when all wayland backends fail * va_trace:add return value trace for vaPutSurfaces ==== libwacom ==== Version update (2.10.0 -> 2.11.0) Subpackages: libwacom-data libwacom9 - update to 2.11.0: * New Devices: - Asus Zenbook Duo - Lenovo Ideapad Duet, Ideapad Duet 3, Thinkpad L13 Yoga Gen 3 - HP Envy x360 * The default fallback device is now an integrated tablet ==== mozilla-nss ==== Version update (3.98 -> 3.99) Subpackages: libfreebl3 libsoftokn3 mozilla-nss-certs mozilla-nss-sysinit mozilla-nss-tools - update to NSS 3.99 * Removing check for message len in ed25519 (bmo#1325335) * add ed25519 to SECU_ecName2params. (bmo#1884276) * add EdDSA wycheproof tests. (bmo#1325335) * nss/lib layer code for EDDSA. (bmo#1325335) * Adding EdDSA implementation. (bmo#1325335) * Exporting Certificate Compression types (bmo#1881027) * Updating ACVP docker to rust 1.74 (bmo#1880857) * Updating HACL* to 0f136f28935822579c244f287e1d2a1908a7e552 (bmo#1325335) * Add NSS_CMSRecipient_IsSupported. (bmo#1877730) ==== openSUSE-release ==== Version update (20240423 -> 20240425) Subpackages: openSUSE-release-appliance-custom openSUSE-release-dvd - automatically generated by openSUSE-release-tools/pkglistgen ==== pcre2 ==== Subpackages: libpcre2-16-0 libpcre2-32-0 libpcre2-8-0 libpcre2-8-0-32bit - build x86_64-v3 optimized libs ==== python-numpy ==== - Add patch fix-meson-multiple-python-versions.patch: * Ensure meson executes sys.executable when testing Cython. ==== python-pyarrow ==== Version update (15.0.2 -> 16.0.0) - Update to 16.0.0 * [Python] construct pandas.DataFrame with public API in to_pandas (#40897) * [Python] Fix ORC test segfault in the python wheel windows test (#40609) * [Python] Attach Python stacktrace to errors in ConvertPyError (#39380) * [Python] Plug reference leaks when creating Arrow array from Python list of dicts (#40412) * [Python] Empty slicing an array backwards beyond the start is now empty (#40682) * [Python] Slicing an array backwards beyond the start now includes first item. (#39240) * [Python] Calling pyarrow.dataset.ParquetFileFormat.make_write_options as a class method results in a segfault (#40976) * [Python] Fix parquet import in encryption test (#40505) * [Python] fix raising ValueError on _ensure_partitioning (#39593) * [Python] Validate max_chunksize in Table.to_batches (#39796) * [C++][Python] Fix test_gdb failures on 32-bit (#40293) * [Python] Make Tensor.__getbuffer__ work on 32-bit platforms (#40294) * [Python] Avoid using np.take in Array.to_numpy() (#40295) * [Python][C++] Fix large file handling on 32-bit Python build (#40176) * [Python] Update size assumptions for 32-bit platforms (#40165) * [Python] Fix OverflowError in foreign_buffer on 32-bit platforms (#40158) * [Python] Add Type_FIXED_SIZE_LIST to _NESTED_TYPES set (#40172) * [Python] Mark ListView as a nested type (#40265) * [Python] only allocate the ScalarMemoTable when used (#40565) * [Python] Error compiling Cython files on Windows during release verification * [Python] Fix flake8 failures in python/benchmarks/parquet.py (#40440) * [Python] Suppress python/examples/minimal_build/Dockerfile.* warnings (#40444) * [Python][Docs] Add workaround for autosummary (#40739) * [Python] BUG: Empty slicing an array backwards beyond the start should be empty * [CI][Python] Activate ARROW_PYTHON_VENV if defined in sdist-test job (#40707) * [CI][Python] CI failures on Python builds due to pytest_cython (#40975) * [Python] ListView pandas tests should use np.nan instead of None (#41040) * [C++][Python] Sporadic asof_join failures in PyArrow [#]# New Features and Improvements * [Python][CI] Remove legacy hdfs tests from hdfs and hypothesis setup (#40363) * [Python] Remove deprecated pyarrow.filesystem legacy implementations (#39825) * [C++][Python] Add missing methods to RecordBatch (#39506) * [Python][CI] Support ORC in Windows wheels * [Python] Correct test marker for join_asof tests (#40666) * [Python] Add join_asof binding (#34234) * [Python] Add a function to download and extract timezone database on Windows (#38179) * [Python][CI][Packaging] Enable ORC on Windows Appveyor CI and Windows wheels for pyarrow * [Python] Add a FixedSizeTensorScalar class (#37533) * [Python][CI][Dev][Python] Release and merge script errors (#37819)" (#40150) * [Python] Construct pyarrow.Field and ChunkedArray through Arrow PyCapsule Protocol (#40818) * [Python] Fix missing byte_width attribute on DataType class (#39592) * [Python] Compatibility with NumPy 2.0 * [Packaging][Python] Enable building pyarrow against numpy 2.0 (#39557) * [Python] Basic pyarrow bindings for Binary/StringView classes (#39652) * [Python] Expose force_virtual_addressing in PyArrow (#39819) * [Python][Parquet] Support hashing for FileMetaData and ParquetSchema (#39781) * [Python] Add bindings for ListView and LargeListView (#39813) * [Python][Packaging] Build pyarrow wheels with numpy RC instead of nightly (#41097) * [Python] Support creating Binary/StringView arrays from python objects (#39853) * [Python] ListView support for pa.array() (#40160) * [Python][CI] Remove upper pin on pytest (#40487) * [Python][FS][Azure] Minimal Python bindings for AzureFileSystem (#40021) * [Python] Low-level bindings for exporting/importing the C Device Interface (#39980) * [Python] Add ChunkedArray import/export to/from C (#39985) * [Python] Use Cast() instead of CastTo (#40116) * [C++][Python] Basic conversion of RecordBatch to Arrow Tensor (#40064) * [C++][Python] Basic conversion of RecordBatch to Arrow Tensor - add support for different data types (#40359) * [C++][Python] Basic conversion of RecordBatch to Arrow Tensor - add option to cast NULL to NaN (#40803) * [Python] Support requested_schema in __arrow_c_stream__() (#40070) * [Python] Support Binary/StringView conversion to numpy/pandas (#40093) ... changelog too long, skipping 36 lines ... - Add pyarrow-pr41319-numpy2-tests.patch gh#apache/arrow#41319 ==== sbl ==== - Add sbl-gcc14.patch: fix an implicit declaration. ==== sg3_utils ==== Version update (1.48+8.37ca384 -> 1.48+9.ecc03bb) Subpackages: libsgutils2-1_48-2 - sg_inq: re-add Unit serial number field (bsc#1219547) ==== virtualbox ==== - Provide a temporary fix to the problem of wrong timestamp for files in a shared folder since kernel 6.6. File "fix_shared_folder_time.patch" is added. This change fixes boo#1220524. ==== virtualbox-kmp ==== - Provide a temporary fix to the problem of wrong timestamp for files in a shared folder since kernel 6.6. File "fix_shared_folder_time.patch" is added. This change fixes boo#1220524. ==== vlc ==== Subpackages: libvlc5 libvlccore9 vlc-codec-gstreamer vlc-lang vlc-noX vlc-qt vlc-vdpau - Enable FluidSynth plugin using an optional package ==== wireplumber ==== Version update (0.5.1 -> 0.5.2) Subpackages: libwireplumber-0_5-0 wireplumber-audio wireplumber-lang wireplumber-zsh-completion - Update to version 0.5.2: * Highlights: - Added support for loading configuration files other than the default wireplumber.conf within Lua scripts (!629) - Added support for loading single-section configuration files, without fragments (!629) - Updated the node.software-dsp script to be able to load filter-chain graphs from external configuration files, which is needed for Asahi Linux audio DSP configuration (!629) * Fixes: - Fixed destroying camera nodes when the camera device is removed (#627, !631) - Fixed an issue with Bluetooth BAP device set naming (!632) - Fixed an issue caused by the pipewire event loop not being "entered" as expected (!634, #638) - A false positive warning about no modules being loaded is now suppressed when using libpipewire >= 1.0.5 (#620) - Default nodes can now be selected using priority.driver when priority.session is not set (#642) * Changes: - The library version is now generated following pipewire's versioning scheme: libwireplumber-0.5.so.0.5.2 becomes libwireplumber-0.5.so.0.0502.0 (!633) - Remove patches from upstream that are already in 0.5.2: * 0001-core-set-context.modules.allow-empty-to-silence-warning-in.patch * 0002-monitor-utils-clear-cam-data-after-creating-nodes.patch * 0003-monitors_bluez-fix-BAP-device-set-node-naming.patch ==== yast2-trans ==== Version update (84.87.20240414.d73f60d6af -> 84.87.20240421.63804708b7) Subpackages: yast2-trans-af yast2-trans-ar yast2-trans-bg yast2-trans-bn yast2-trans-bs yast2-trans-ca yast2-trans-cs yast2-trans-cy yast2-trans-da yast2-trans-de yast2-trans-el yast2-trans-en_GB yast2-trans-es yast2-trans-et yast2-trans-fa yast2-trans-fi yast2-trans-fr yast2-trans-gl yast2-trans-gu yast2-trans-hi yast2-trans-hr yast2-trans-hu yast2-trans-id yast2-trans-it yast2-trans-ja yast2-trans-jv yast2-trans-ka yast2-trans-km yast2-trans-ko yast2-trans-lo yast2-trans-lt yast2-trans-mk yast2-trans-mr yast2-trans-nb yast2-trans-nl yast2-trans-pa yast2-trans-pl yast2-trans-pt yast2-trans-pt_BR yast2-trans-ro yast2-trans-ru yast2-trans-si yast2-trans-sk yast2-trans-sl yast2-trans-sr yast2-trans-sv yast2-trans-ta yast2-trans-th yast2-trans-tr yast2-trans-uk yast2-trans-vi yast2-trans-wa yast2-trans-xh yast2-trans-zh_CN yast2-trans-zh_TW yast2-trans-zu - Update to version 84.87.20240421.63804708b7: * Translated using Weblate (Romanian) * Translated using Weblate (Romanian) * Translated using Weblate (Romanian) * Translated using Weblate (Romanian) * Translated using Weblate (Romanian) * Translated using Weblate (Romanian) * Translated using Weblate (Slovak) * Translated using Weblate (Czech) * Translated using Weblate (Dutch) * Translated using Weblate (Catalan) * Translated using Weblate (Japanese) * New POT for text domain 'storage'. * New POT for text domain 'docker'. * Translated using Weblate (Romanian) * Translated using Weblate (Romanian)

1 0

openSUSE:Factory - Build fail notification
by DimStar / Dominique Leuenberger 26 Apr '24

26 Apr '24

Dear Package maintainers and hackers. Below package(s) in openSUSE:Factory have had problems for at least 4 weeks. We tried to send out notifications to the configured bugowner/maintainers of the package(s), but so far no fix has been submitted. This probably means that the maintainer/bugowner did not yet find the time to look into the matter and he/she would certainly appreciate help to get this sorted. - SQLiteCpp: Fails to build - VecCore: Fails to build - ade: Fails to build - proj: Fails to build - spglib: Fails to build - verdict: Fails to build Unless somebody is stepping up and submitting fixes, the listed package(s) are going to be removed from openSUSE:Factory. Kind regards, DimStar / Dominique Leuenberger <dimstar(a)opensuse.org>

2 1

Z Training by IBM for the community (Tuesday, 30th April 2024)
by Sarah Julia Kriesch 25 Apr '24

25 Apr '24

Hello together, are you a Package Maintainer or in general Linux Developer/Tester interested what is behind the architecture s390x or do you want to refresh your knowledge about mainframes? I am happy to announce, that I have received the offer by PJ Catalano at the IBM Z Symposium to provide a technical mainframe introduction with the direction of a deeper knowledge for the Z architecture during our openSUSE zSystems Knowledge Sharing Session, Tuesday, the 30th April 2024 at 19:00 (German time). PJ is Senior Technical Staff Member and Test Architect (maintaining and testing 200 mainframes in an IBM laboratory in the USA) at IBM. We know us from conferences (Open Mainframe Project and IBM conferences) and he wants to support expanding the mainframe knowledge within the Linux community. This training is free for all. You can forward also this invitation to other Members within the Linux community (who are looking for such trainings). Are you interested for the next learning sessions? Then join us next Tuesday at 19:00 (German time)/ 10:00 (Pacific time)/ 18:00 (Nigeria) / 14:00 (Brazil)! Our meeting/training room: https://meet.opensuse.org/s390x Best regards, Sarah P.S. The training next week is also usable for real Mainframe newbies. We will follow with deeper technical introductions 2 weeks later.

1 0

[opensuse-factory] Leap 42.3 Build 0312 released!
by Ludwig Nussel 25 Apr '24

25 Apr '24

Please note that this mail was generated by a script. The described changes are computed based on the x86_64 DVD. The full online repo contains too many changes to be listed here. Please check the known defects of this snapshot before upgrading: https://openqa.opensuse.org/tests/overview?distri=opensuse&version=42.3&bui… https://bugzilla.opensuse.org/buglist.cgi?product=openSUSE%20Distribution&q… When you reply to discuss some issues, make sure to change the subject. Please use the test plan at https://docs.google.com/spreadsheets/d/1AGKijKpKiJCB616-bHVoNQuhWHpQLHPWCb3… to record your testing efforts and use bugzilla to report bugs. Packages changed: biosdevname btrfsmaintenance conduit gconf2-branding-openSUSE (42.1 -> 42.3) ibus kactivitymanagerd kde-user-manager kernel-source (4.4.73 -> 4.4.74) libxml2 libzypp (16.12.0 -> 16.13.0) lightdm marble mc plasma5-integration plasma5-openSUSE postgresql (9.4 -> 9.6) python-coverage (3.7.1 -> 4.3.4) ucode-intel (20160714 -> 20170511) yast2-bootloader (3.2.22 -> 3.2.23) yast2-ntp-client (3.2.9 -> 3.2.12) === Details === ==== biosdevname ==== - Duplicate naming of SRIOV VFs by biosdevname when VPD_DCM Strings are present in VFs (bsc#1042185) * Add: biosdevname_avoid_duplicates.patch ==== btrfsmaintenance ==== - Require btrfsprogs (bsc#1047226) - update to 0.2 - updated documentation - no hardcoded paths to external utilities - fixed logger name typos for 'journal' target - defrag fixes (sysconfig, find arguments) - Removed patch: balance-typo.patch - Added patch: sysconfig-override-trim.diff - Add balance-typo.patch (bnc#986543) - version 0.1.1 - fix typo and make journal logging target work - cron refresh: remove bashism - Removed patches: * 0003-Add-COPYING-file.patch * 0011-cron-refresh-remove-debuggiong-output.patch - cron script symlinks are not created on first installation (bsc#907343) - add COPYING to package - refresh script: remove extra messages - add uninstall targets - fix refresh service - adjust sysconfig defaults - Add more package dependencies (cron, zypp-plugin) - minor bugfixes - Add supplements(btrfsprogs) - initial version 0.1 ==== conduit ==== Subpackages: conduit-lang - Use python-vobject instead of vobject per python-vobject change in 42.3. ==== gconf2-branding-openSUSE ==== Version update (42.1 -> 42.3) - do not build novell-sound-theme in the gconf2-branding-SLED build to prevent duplicated binaries in openSUSE Leap. The novell-sound-theme is taken from gconf2-branding-SLES sources on both the SLED product and the SLES WE module. bsc#1046099 - bump versions ==== ibus ==== Subpackages: ibus-branding-openSUSE-KDE ibus-gtk ibus-gtk-32bit ibus-gtk3 ibus-lang libibus-1_0-5 libibus-1_0-5-32bit python-ibus typelib-1_0-IBus-1_0 - Update ibus.spec: copy auto-start files to SOURCE directory to enable modifications before compile. - Add ibus-disable-engines-preload-in-GNOME.patch: Disable load preload-engines actions in SLE, which is unnecessary for mono IMF in SLE and may cause CJK user login failed (bsc#1036729). ==== kactivitymanagerd ==== - Recommend -lang package ==== kde-user-manager ==== - Recommend -lang package ==== kernel-source ==== Version update (4.4.73 -> 4.4.74) Subpackages: kernel-default kernel-default-devel kernel-devel kernel-docs kernel-macros kernel-syms - Delete patches.kabi/kabi-fix-for-kvm-x86-fix-singlestepping-over-syscall. No need for kABI fix yet for Leap 42.3. - commit f0a86d9 - Fix kABI breakage by KVM CVE fix (bsc#1045922). - commit c0308f6 - powerpc/perf: Fix branch event code for power9 (fate#321438, Pending SUSE Kernel Fixes). - commit e954af6 - powerpc: Fix /proc/cpuinfo revision for POWER9 DD2 (bsc#1046789). - commit 444247f - Refresh metadata patches.drivers/ibmvnic-a2-Fix-assignment-of-RX-TX-IRQ-s.patch. - commit be32be9 - drm/i915: Serialize GTT/Aperture accesses on BXT (bsc#1046821). - commit b263fef - Bluetooth: hidp: fix possible might sleep error in hidp_session_thread (bsc#1031784). - Refresh patches.suse/kgr-0008-mark-task_safe-in-some-kthreads.patch. - commit 18c6f3e - KVM: x86: fix singlestepping over syscall (CVE-2017-7518 bsc#1045922). - commit d989643 - nvme/pci: Fix stuck nvme reset (bsc#1043805). - commit 7afe4f0 - Refresh fadump patches to upstream and add metadata patches.arch/powerpc-fadump-add-reschedule-point-while-releasing-memory.patch. patches.arch/powerpc-fadump-avoid-duplicates-in-crash-memory-ranges.patch patches.arch/powerpc-fadump-avoid-holes-in-boot-memory-area-when-fadump-is-registered.patch patches.arch/powerpc-fadump-provide-a-helpful-error-message.patch - commit f0fb5c3 - blacklist.conf: Remove duplicated entries - commit cb960d2 - Remove duplicated blacklist entries and put git-commit tag to patches - commit 12a0cb2 - blacklist.conf: Remove duplicated entry. - commit 561ddb1 - ibmvnic: Fix assignment of RX/TX IRQ's (bsc#1046589). - commit 5fa38bf - blacklist.conf: blacklist 570d8e939801 we do not care about the code in Documentation all that much, do we? - commit 69d5811 - blacklist.conf: blaclist 5380e5644afb it is just not worth backporting without any explicit report where a silently truncated success would lead to a real bug. - commit fc28626 - blacklist.conf: unnecessary patch The bug triggers only upon a malformed descriptor and the comparison is so that our buffer would be too large not too small so no overflow. The device would not work, but it won't anyway. - commit 99f8a16 - Rearrange the previous patches for hpsa and smartpqi to the right position. - commit a1f1f27 - Update patches.fixes/xfs-split-default-quota-limits-by-quota-type.patch (bsc#1040941). Fix the bug nr used. - commit 115ba75 - printk: Correctly handle preemption in console_unlock() (bsc#1046434). - commit 0a3c2a4 - printk/xen: Force printk sync mode when migrating Xen guest (bsc#1043347). - commit e13596b - btrfs: disable possible cause of premature ENOSPC (bsc#1040182) - commit 8bf31da - rbd: make sure pages are freed by libceph (bsc#1045596). - rbd: drop extra rbd_img_request_get (bsc#1045596). - commit c8719f2 - dm-raid: Do not call BUG() in __rdev_sectors() (bsc#1046264). - commit 0b1aab0 - btrfs: Round down values which are written for total_bytes_size (bsc#1043912). - btrfs: Manually implement device_total_bytes getter/setter (bsc#1043912). - commit c4d2eb7 - pipe: cap initial pipe capacity according to pipe-max-size limit (bsc#1045330). - commit 4ee3ec2 - Blacklist drivers/net/ethernet/ibm/emac We do not build the driver. - commit d432b2b - blacklist.conf: this patch breaks the API It disallows some operations that are now allowed - commit 98325c2 - arm64: Update config files. (bsc#1036737) Disable XGENE_PMU. - commit 7bb0115 - Disable Xilinx network drivers (bsc#1046170). - commit 656fc83 - hwpoison, memcg: forcibly uncharge LRU pages (bnc#1046105). - commit 2b252e1 - blacklist.conf: blacklist 570d8e939801 the issue is visible only when 80df554275c2 is applied (4.7+ and not backported to our trees) - commit 47b83ce - config/x86_64: make CONFIG_SERIAL_8250_DW and *_MID built-in (bsc#1024449) - commit 2e3ca7e - Refresh patches.drivers/0477-nvme-add-hostid-token-to-fabric-options.patch. Update mainline references. - commit eee1109 - fs/exec.c: account for argv/envp pointers (bnc#1039354, CVE-2017-1000365). - commit 7418d0f - Refresh ibmvnic patch metadata patches.drivers/ibmvnic-98-ibmvnic-Correct-return-code-checking-for-ibmvnic_init-during-probe.patch. patches.drivers/ibmvnic-a0-ibmvnic-Fix-incorrectly-defined-ibmvnic_request_map_rsp-structure.patch. patches.drivers/ibmvnic-a1-ibmvnic-Fix-error-handling-when-registering-long-term-mapped-buffers.patch. - commit babc17a - Refresh metadata patches.fixes/powerpc-tm-Fix-stack-pointer-corruption-in-__tm_recheckpoint. - commit 0b5bdc6 - powerpc/ftrace: Pass the correct stack pointer for DYNAMIC_FTRACE_WITH_REGS (FATE#322421). - commit 936e653 - nvme: add hostid token to fabric options (bsc#1045293). - commit 52dffb9 - iw_cxgb4: Fix error return code in c4iw_rdev_open() (bsc#1026570). - RDMA/iw_cxgb4: Always wake up waiter in c4iw_peer_abort_intr() (bsc#1026570). - commit 2ce43b1 - clocksource/drivers/arm_arch_timer: Fix read and iounmap of incorrect variable (bsc#1045937). - commit 594f037 - Linux 4.4.74 (CVE-2017-1000364 bnc#1012382 bnc#1039348 bnc#1045340 bsc#1031717 bsc#1043231). - Delete patches.drivers/media-pvrusb2-reduce-stack-usage-pvr2_eeprom_analyze. - Delete patches.drivers/media-vb2-Fix-an-off-by-one-error-in-vb2_plane_vaddr. - Delete patches.drivers/staging-rtl8188eu-prevent-an-underflow-in-rtw_check_. - Delete patches.fixes/mm-fix-new-crash-in-unmapped_area_topdown.patch. - Delete patches.fixes/mm-larger-stack-guard-gap-between-vmas.patch. - commit 5e41880 - tty: Fix ldisc crash on reopened tty (bnc#1043488). - commit 04cca20 - tty: Destroy ldisc instance on hangup (bnc#1043488). - tty: Refactor tty_ldisc_reinit() for reuse (bnc#1043488). - tty: Use 'disc' for line discipline index name (bnc#1043488). - tty: Move tty_ldisc_kill() (bnc#1043488). - tty: Handle NULL tty->ldisc (bnc#1043488). - tty: Prepare for destroying line discipline on hangup (bnc#1043488). - tty: Reset c_line from driver's init_termios (bnc#1043488). - tty: Simplify tty_set_ldisc() exit handling (bnc#1043488). - commit c016cca - kabi: ignore fs_info parameter for tracepoints that didn't have it (bsc#1044912). - commit 24869ea ==== libxml2 ==== Subpackages: libxml2-2 libxml2-2-32bit libxml2-devel libxml2-tools - Security fix: * libxml2-CVE-2017-7376.patch [bsc#1044887, CVE-2017-7376] * Increase buffer space for port in HTTP redirect support - Security fix: * libxml2-CVE-2017-7375.patch [bsc#1044894, CVE-2017-7375] * Prevent unwanted external entity reference - Upstream patches updated and with tests: * libxml2-CVE-2017-9047.patch and libxml2-CVE-2017-9048.patch merged into libxml2-CVE-2017-9047.patch [bsc#1039066, bsc#1039661] * libxml2-CVE-2017-9049.patch and libxml2-CVE-2017-9050.patch merged into libxml2-CVE-2017-9049.patch [bsc#1039063, bsc#1039064] ==== libzypp ==== Version update (16.12.0 -> 16.13.0) - Adapt loop mounting of iso images (bsc#1038132, bsc#1033236) - Adjust zypp.conf for openSUSE Tumbleweed (bsc#1031756) - Change arch variable names conflicting with compiler macros (fixes #70) - Fix potential crash if repo has no baseurl (bnc#1043218) - version 16.13.0 (0) ==== lightdm ==== Subpackages: liblightdm-gobject-1-0 lightdm-lang - Augment patch to also resolve the target of symlink sessions for detemining the preselected option: * ignore-known-symlink-sessions.patch ==== marble ==== Subpackages: libastro1 libmarblewidget-qt5-27 marble-data marble-devel marble-doc marble-kde marble-lang - Add Fix-utm-enum-value.patch and reverse-apply it, this upstream commit causes a crash when adding bookmarks if switched to UTM view angles because the necessary handler functions for the dialog are not implemented yet (boo#1044747, kde#381872) - Add Fix-plain-map-and-political-map-showing-no-content.patch to fix the plain map and the political map being not displayed at all (kde#379297) ==== mc ==== Subpackages: mc-lang - sftp.patch: Backport upstream fixes for SFTP (boo#1004280, boo#1042797) ==== plasma5-integration ==== - Move the Recommends: %{name}-plugin-lang to the plasma5-integration-plugin sub package, otherwise the translations won't get installed as there is no main package (boo#1027925) - Actually apply the aforementioned patch (shouldn't the source validator have warned?) ==== plasma5-openSUSE ==== Subpackages: plasma5-defaults-openSUSE plasma5-theme-openSUSE plasma5-workspace-branding-openSUSE sddm-theme-openSUSE - Fix installation of the sddm theme files (boo#1047254) ==== postgresql ==== Version update (9.4 -> 9.6) Subpackages: postgresql-contrib postgresql-devel postgresql-docs postgresql-server - Bump version and defaultpackage to 9.6. - Move ~postgres/.bash_profile to postgresql-server to avoid a file conflict between the versioned server packages. - Bump version and defaultpackage to 9.4. - Bump version and defaultpackage to 9.3. - Change license string to PostgreSQL. - Make all dummy packages noarch. - Make PostgreSQL 9.2 the default. - Reduce the postgresql packages with unversioned names to dummy packages that require the respective versioned package names. ==== python-coverage ==== Version update (3.7.1 -> 4.3.4) - uninstall alternatives in %postun - update for singlespec - update to 4.3.4: - Using the --skip-covered option on an HTML report with 100% coverage would cause a ?No data to report? error, as reported in issue 549. This is now fixed; thanks, Lo�c Dachary. - If-statements can be optimized away during compilation, for example, if 0: or if __debug__:. Coverage.py had problems properly understanding these statements which existed in the source, but not in the compiled bytecode. This problem, reported in issue 522, is now fixed. - If you specified --source as a directory, then coverage.py would look for importable Python files in that directory, and could identify ones that had never been executed at all. But if you specified it as a package name, that detection wasn?t performed. Now it is, closing issue 426. Thanks to Lo�c Dachary for the fix. - If you started and stopped coverage measurement thousands of times in your process, you could crash Python with a ?Fatal Python error: deallocating None? error. This is now fixed. Thanks to Alex Groce for the bug report. - On PyPy, measuring coverage in subprocesses could produce a warning: ?Trace function changed, measurement is likely wrong: None?. This was spurious, and has been suppressed. - Previously, coverage.py couldn?t start on Jython, due to that implementation missing the multiprocessing module (issue 551). This problem has now been fixed. Also, issue 322 about not being able to invoke coverage conveniently, seems much better: jython -m coverage run myprog.py works properly. - Let?s say you ran the HTML report over and over again in the same output directory, with --skip-covered. And imagine due to your heroic test-writing efforts, a file just acheived the goal of 100% coverage. With coverage.py 4.3, the old HTML file with the less-than-100% coverage would be left behind. This file is now properly deleted. - update to Version 4.3.1 ? 2016-12-28: - Some environments couldn?t install 4.3, as described in issue 540. This is now fixed. - The check for conflicting --source and --include was too simple in a few different ways, breaking a few perfectly reasonable use cases, described in issue 541. The check has been reverted while we re-think the fix for issue 265. - update to Version 4.3 ? 2016-12-27: Special thanks to Lo�c Dachary, who took an extraordinary interest in coverage.py and contributed a number of improvements in this release. - The HTML report now supports a --skip-covered option like the other reporting commands. Thanks, Lo�c Dachary for the implementation, closing issue 433. - Subprocesses that are measured with automatic subprocess measurement used to read in any pre-existing data file. This meant data would be incorrectly carried forward from run to run. Now those files are not read, so each subprocess only writes its own data. Fixes issue 510. - Coverage.py wouldn?t execute sys.excepthook when an exception happened in your program. Now it does, thanks to Andrew Hoos. Closes issue 535. - The coverage combine command will now fail if there are no data files to combine. The combine changes in 4.2 meant that multiple combines could lose data, leaving you with an empty .coverage data file. Fixes issues issue 525, issue 412, issue 516, and probably issue 511. - The branch coverage issues described in issue 493, issue 496, and issue 502 are now fixed, thanks to Lo�c Dachary. - Options can now be read from a tox.ini file, if any. Like setup.cfg, sections are prefixed with ?coverage:?, so [run] options will be read from the [coverage:run] section of tox.ini. Implements part of issue 519. Thanks, Stephen Finucane. - Specifying both --source and --include no longer silently ignores the include setting, instead it fails with a message. Thanks, Nathan Land and Lo�c Dachary. Closes issue 265. - Coverage.py can now search .pex files for source, just as it can .zip and .egg. Thanks, Peter Ebden. - update to 4.2: - Since ``concurrency=multiprocessing`` uses subprocesses, options specified on the coverage.py command line will not be communicated down to them. Only options in the configuration file will apply to the subprocesses. Previously, the options didn't apply to the subprocesses, but there was no indication. Now it is an error to use ``--concurrency=multiprocessing`` and other run-affecting options on the command line. This prevents failures like those reported in `issue 495`_. - Filtering the HTML report is now faster, thanks to Ville Skytt�. - update to 4.0.3: - Fixed a mysterious problem that manifested in different ways: sometimes hanging the process (`issue 420`_), sometimes making database connections fail (`issue 445`_). - The XML report now has correct ``<source>`` elements when using a ``--source=`` option somewhere besides the current directory. This fixes `issue 439`_. Thanks, Arcady Ivanov. - Fixed an unusual edge case of detecting source encodings, described in `issue 443`_. - Help messages that mention the command to use now properly use the actual command name, which might be different than "coverage". Thanks to Ben Finney, this closes `issue 438`_. - add LICENSE.txt - Pre require coreutils. This package is needed for the rm call in the pre section. Subprocess failed. Error: RPM failed: /var/tmp/rpm-tmp.gONanE: line 3: rm: command not found - specfile: * updated license * updated update-alternatives * README.txt -> README.rst - update to version 4.0: (long list, see http://coverage.readthedocs.org/en/latest/changes.html) - fix rhel deps by depending on /usr/sbin/update-alternatives ==== ucode-intel ==== Version update (20160714 -> 20170511) - Update to version 20170511 - Update to version 20161104. ==== yast2-bootloader ==== Version update (3.2.22 -> 3.2.23) - AuotYaST configuration: Set StorageDevices flag disks_valid to true. So libstorage can scan valid disks and "/" partition can be found. (bnc#1043132) - 3.2.23 ==== yast2-ntp-client ==== Version update (3.2.9 -> 3.2.12) - Resrict records are written at the end but the default file and most profiles use them at the beginning, which mangles the file completely (bsc#983486). To fix it we have just changed the order of writing. - 3.2.12 - AutoYaST: Fix crash when trying to sanitize not string values, for example initial_sync. - AutoYaST: Sanitize comments by only removing blank spaces at the beginning and adding line break. This avoids augeas parse errors (bsc#1045777). - 3.2.11 - AutoYaST: Fix crash in CFA when creating a command record with some key value option is given (bsc#1045968) - 3.2.10 - AutoYaST: Comments from autoyast profile should not be sanitized to avoid entries without space between value and comment (e.g trustedkey 1# coment). This is caused by a bug in augeas adding new entries. -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 1

[opensuse-factory] acpid requires systemd?
by Felix Miata 25 Apr '24

25 Apr '24

Can this be true? If so, why? Zypper won't let me upgrade acpid without breakage unless systemd is installed too. I have systemd locked out, as I'd rather test things I can understand in Factory, not major overhaul stuff. -- "The wise are known for their understanding, and pleasant words are persuasive." Proverbs 16:21 (New Living Translation) Team OS/2 ** Reg. Linux User #211409 ** a11y rocks! Felix Miata *** http://fm.no-ip.com/ -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

4 3

Plasmatube issu since Tumbleweed snapshot 20240418
by Ulf 24 Apr '24

24 Apr '24

Hi, I have some trouble with plasmatube (24.02.2-1.1 - rolled out with 20240415) since the last days (20240418). Anyone can reproduce this issue? Issue: If I start plasmatube all went fine and the and I will loeged in the selceted invideo instance. I see my subrictions and I'm able to select them. But now there will be a new window opend (connected to the overiew which shows only the video. The Video Picture in the plasmatube main window is blank. I can use there the symbols to play the video in the extra window. It is only possible to play the video once. It is not possible to close the window (miss the option to kill the window with <ctrl>+<alt>+<esc> like in the past). Only option is to close the PlasmaTube Main window and restart it. Regards Ulf

2 2

New Tumbleweed snapshot 20240423 released!
by Dominique Leuenberger 24 Apr '24

24 Apr '24

Please note that this mail was generated by a script. The described changes are computed based on the x86_64 DVD. The full online repo contains too many changes to be listed here. Please check the known defects of this snapshot before upgrading: https://openqa.opensuse.org/tests/overview?distri=opensuse&groupid=1&versio… Please do not reply to this email to report issues, rather file a bug on bugzilla.opensuse.org. For more information on filing bugs please see https://en.opensuse.org/openSUSE:Submitting_bug_reports Packages changed: libguestfs openSUSE-release (20240421 -> 20240423) python-gevent (23.9.1 -> 24.2.1) python-matplotlib (3.8.3 -> 3.8.4) python-matplotlib-inline (0.1.6 -> 0.1.7) python-pycparser (2.21 -> 2.22) python-pycups (2.0.1 -> 2.0.4) === Details === ==== libguestfs ==== Subpackages: libguestfs-appliance libguestfs-winsupport libguestfs-xfs libguestfs0 - Require ntfs-3g for libguestfs-winsupport libguestfs.spec ==== openSUSE-release ==== Version update (20240421 -> 20240423) Subpackages: openSUSE-release-appliance-custom openSUSE-release-dvd - automatically generated by openSUSE-release-tools/pkglistgen ==== python-gevent ==== Version update (23.9.1 -> 24.2.1) - Add gh-113964-fix-tests-3.12.3.patch to tix tests with python 3.12.3 (bsc#1223128) - Drop upstream patches: * gevent-fix-unittest-returncode-py312-c1.patch * gevent-fix-unittest-returncode-py312-c2.patch - Update to version 24.2.1: - Add support for Python patch releases 3.11.8 and 3.12.2, which changed internal details of threading. - Errors raised from subprocess.Popen may not have a filename set. - SSLSocket.recv_into and SSLSocket.read no longer require the buffer to implement len and now work with buffers whose size is not 1. - gh-108310: Fix CVE-2023-40217: Check for & avoid the ssl pre-close flaw. - Drop setuptools to a soft test dependency. - Drop support for very old versions of CFFI. - Update bundled c-ares from 1.19.1 to 1.26.0. - Locks created by gevent, but acquired from multiple different threads (not recommended), no longer spin to implement timeouts and interruptible blocking. Instead, they use the native functionality of the Python 3 lock. This may improve some scenarios. See issue #2013. ==== python-matplotlib ==== Version update (3.8.3 -> 3.8.4) - Update to 3.8.4 * Enable building against numpy 2.0; released wheels are built against numpy 2 * Add a draw during show for macos backend * Fix color sequence data for Set2 and Set3 * gtk: Ensure pending draws are done before GTK draw * Update "Created with" url in hand.svg * Avoid modifying user input to Axes.bar * fix quiver3d incorrect arrow colors ==== python-matplotlib-inline ==== Version update (0.1.6 -> 0.1.7) - Update to version 0.1.7 * Use short matplotlib backend name * Add matplotlib.backend entry point * Use pyproject.toml instead of setup.cfg - Use pyproject-based install ==== python-pycparser ==== Version update (2.21 -> 2.22) - update to 2.22: * Add missing SCHAR limit defines * Use proper SPDX identifier * Add Python 3.11 as a supported version * Fix multi-pragma/single statement blocks (#479) * Add an encoding parameter to parse_file * Feature/add pragma support * Set up permissions to ci.yml * _build_tables: Invalidate cache before importing generated modules * Upgrade GitHub Actions * Create a Security Policy * New example to generate AST from scratch * Add support for Python 3.12 * ply: Make generated lextab.py deterministic - drop fix-lexer-build.patch (upstream) ==== python-pycups ==== Version update (2.0.1 -> 2.0.4) - update to 2.0.4: * remove the install_requires from setup.py * removed shebang from example/cupstree.py * ignore driverless utilities for postscriptdriver tags creation (Fedora bug #1873385) * remove epydoc from Makefile (#27) * fix invalid delete of pointer (#11) * Makefile uses wrong Python (#32) * define PY_SSIZE_T_CLEAN in cupsipp.h - fixes traceback during IPPRequest.writeIO with Python 3.10 * fix the test.py when there is no printer installed (#46) * Use PyObject_Call() instead of deprecated PyEval

1 0

New Tumbleweed snapshot 20240421 released!
by Dominique Leuenberger 23 Apr '24

23 Apr '24

Please note that this mail was generated by a script. The described changes are computed based on the x86_64 DVD. The full online repo contains too many changes to be listed here. Please check the known defects of this snapshot before upgrading: https://openqa.opensuse.org/tests/overview?distri=opensuse&groupid=1&versio… Please do not reply to this email to report issues, rather file a bug on bugzilla.opensuse.org. For more information on filing bugs please see https://en.opensuse.org/openSUSE:Submitting_bug_reports Packages changed: NetworkManager (1.44.2 -> 1.44.4) gcc14 (14.0.1+git9885 -> 14.0.1+git10008) glibc gtk2 gtk4 (4.14.2 -> 4.14.3) inkscape kernel-firmware (20240322 -> 20240419) libheif libmusicbrainz libqt5-qtwebengine libxml2 (2.11.6 -> 2.12.6) libxml2-python (2.11.6 -> 2.12.6) libzypp (17.32.4 -> 17.32.5) llvm18 (18.1.3 -> 18.1.4) openSUSE-release (20240419 -> 20240421) python-argcomplete (3.2.2 -> 3.3.0) python-numpy (1.26.2 -> 1.26.4) python311 (3.11.8 -> 3.11.9) python311-core (3.11.8 -> 3.11.9) virt-v2v virtualbox virtualbox-kmp (7.0.14_k6.8.6_1 -> 7.0.14_k6.8.7_1) xfsprogs (6.6.0 -> 6.7.0) === Details === ==== NetworkManager ==== Version update (1.44.2 -> 1.44.4) Subpackages: NetworkManager-bluetooth NetworkManager-lang NetworkManager-tui NetworkManager-wwan libnm0 typelib-1_0-NM-1_0 - Update to version 1.44.4: + Add the 'dns-change' dispatcher event. + Various fixed related to IPv4 duplicate address detection. + Fix support for OVS netdev datapath + Fix handling of IPv6 hop limit ==== gcc14 ==== Version update (14.0.1+git9885 -> 14.0.1+git10008) Subpackages: libasan8 libatomic1 libgcc_s1 libgcc_s1-32bit libgfortran5 libgomp1 libhwasan0 libitm1 liblsan0 libobjc4 libquadmath0 libstdc++6 libstdc++6-32bit libstdc++6-locale libstdc++6-pp libstdc++6-pp-32bit libtsan2 libubsan1 - Update to trunk head, 7c2a9dbcc2c1cb1563774068c59d5e09e, git10008 ==== glibc ==== Subpackages: glibc-32bit glibc-devel glibc-extra glibc-lang glibc-locale glibc-locale-base nscd - iconv-iso-2022-cn-ext.patch: iconv: ISO-2022-CN-EXT: fix out-of-bound writes when writing escape sequence (CVE-2024-2961, bsc#1222992) ==== gtk2 ==== Subpackages: gtk2-data gtk2-immodule-xim gtk2-lang gtk2-tools libgtk-2_0-0 - Do not recommend the variuos -immodule-*: they have locale based provides which makes zypper install them when the locales are requested. ==== gtk4 ==== Version update (4.14.2 -> 4.14.3) Subpackages: gtk4-lang gtk4-schema gtk4-tools libgtk-4-1 typelib-1_0-Gtk-4_0 - Update to version 4.14.3: + GtkShortcutManager: Track the propagation phase of added controllers. + Accessibility: Implement GtkAccessibleRange for scrollbars. + X11: - Fix some confusing debug messages - Drop a no-longer-relevant optimization that was interfering with getting the current window manager capabilities. + Tools: Support generating pdf in gtk4-rendernode-tool. + Updated translations. ==== inkscape ==== Subpackages: inkscape-extensions-extra inkscape-extensions-gimp inkscape-lang - Add inkscape-libxml2.12.patch: Fix build with libxml 2.12. ==== kernel-firmware ==== Version update (20240322 -> 20240419) Subpackages: kernel-firmware-all kernel-firmware-amdgpu kernel-firmware-ath10k kernel-firmware-ath11k kernel-firmware-ath12k kernel-firmware-atheros kernel-firmware-bluetooth kernel-firmware-bnx2 kernel-firmware-brcm kernel-firmware-chelsio kernel-firmware-dpaa2 kernel-firmware-i915 kernel-firmware-intel kernel-firmware-iwlwifi kernel-firmware-liquidio kernel-firmware-marvell kernel-firmware-media kernel-firmware-mediatek kernel-firmware-mellanox kernel-firmware-mwifiex kernel-firmware-network kernel-firmware-nfp kernel-firmware-nvidia kernel-firmware-platform kernel-firmware-prestera kernel-firmware-qcom kernel-firmware-qlogic kernel-firmware-radeon kernel-firmware-realtek kernel-firmware-serial kernel-firmware-sound kernel-firmware-ti kernel-firmware-ueagle kernel-firmware-usb-network - Update to version 20240419 (git commit 7eab37522984): * Montage: update firmware for Mont-TSSE * linux-firmware: Add tuning parameter configs for CS35L41 Firmware * linux-firmware: Fix firmware names for Laptop SSID 104316a3 * linux-firmware: Add CS35L41 HDA Firmware for Lenovo Legion Slim 7 16ARHA7 * linux-firmware: update firmware for mediatek bluetooth chip (MT7922) * linux-firmware: update firmware for MT7922 WiFi device * iwlwifi: add gl FW for core87-44 release * iwlwifi: add ty/So/Ma firmwares for core87-44 release * iwlwifi: update cc/Qu/QuZ firmwares for core87-44 release * nvidia: Update Tegra210 XUSB firmware to v50.29 * amdgpu: update beige goby firmware * amdgpu: update dimgrey cavefish firmware * amdgpu: update psp 13.0.11 firmware * amdgpu: update gc 11.0.4 firmware * amdgpu: update navy flounder firmware * amdgpu: update renoir firmware * amdgpu: update vcn 4.0.2 firmware * amdgpu: update sdma 6.0.1 firmware * amdgpu: update psp 13.0.4 firmware * amdgpu: update gc 11.0.1 firmware * amdgpu: update sienna cichlid firmware * amdgpu: update vega20 firmware * amdgpu: update yellow carp firmware * amdgpu: update green sardine firmware * amdgpu: update vega12 firmware * amdgpu: update raven2 firmware * amdgpu: update vcn 4.0.4 firmware * amdgpu: update smu 13.0.7 firmware * amdgpu: update sdma 6.0.2 firmware * amdgpu: update ipsp 13.0.7 firmware * amdgpu: update gc 11.0.2 firmware * amdgpu: update vega10 firmware * amdgpu: update raven firmware * amdgpu: update navi14 firmware * amdgpu: update smu 13.0.10 firmware * amdgpu: update sdma 6.0.3 firmware * amdgpu: update psp 13.0.10 firmware * amdgpu: update gc 11.0.3 firmware * amdgpu: update vcn 3.1.2 firmware * amdgpu: update psp 13.0.5 firmware * amdgpu: update gc 10.3.6 firmware * amdgpu: update navi12 firmware * amdgpu: update arcturus firmware * amdgpu: update vangogh firmware * amdgpu: update navi10 firmware * amdgpu: update vcn 4.0.3 firmware * amdgpu: update smu 13.0.6 firmware * amdgpu: update psp 13.0.6 firmware * amdgpu: update gc 9.4.3 firmware * amdgpu: update vcn 4.0.0 firmware * amdgpu: update smu 13.0.0 firmware * amdgpu: update sdma 6.0.0 firmware * amdgpu: update psp 13.0.0 firmware * amdgpu: update gc 11.0.0 firmware * amdgpu: update firmware * amdgpu: update aldebaran firmware * amdgpu: update psp 13.0.8 firmware * amdgpu: update gc 10.3.7 firmware * linux-firmware: mediatek: Update MT8173 VPU firmware to v1.1.9 * ath10k: WCN3990: hw1.0: add qcm2290 firmware API file * ath10k: WCN3990: hw1.0: move firmware back from qcom/ location * i915: Add DG2 HuC 7.10.15 * amdgpu: DMCUB updates for various AMDGPU ASICs * linux-firmware: update firmware for en8811h 2.5G ethernet phy * rtw89: 8852c: update fw to v0.27.56.14 * rtw89: 8922a: add firmware v0.35.18.0 * rtw88: Add RTL8703B firmware v11.0.0 ==== libheif ==== Subpackages: gdk-pixbuf-loader-libheif libheif-aom libheif-dav1d libheif-ffmpeg libheif-jpeg libheif-openjpeg libheif-rav1e libheif-svtenc libheif1 - Add libheif-svtav1.patch: Fix compilation with libsvtav1 2.0.0. ==== libmusicbrainz ==== - Add libmusicbrainz-libxml2.12.patch: Fix build against libxml 2.12. ==== libqt5-qtwebengine ==== - Add patch to fix build with libxml >= 2.12: * 0001-Fix-building-with-system-libxml2.patch ==== libxml2 ==== Version update (2.11.6 -> 2.12.6) Subpackages: libxml2-2 libxml2-tools - Update to version 2.12.6 * Regressions - parser: Fix detection of duplicate attributes in XML namespace - xmlreader: Fix xmlTextReaderConstEncoding - html: Fix htmlCreatePushParserCtxt with encoding - xmllint: Return error code if XPath returns empty nodeset - Update to version 2.12.5 * Security - [CVE-2024-25062] xmlreader: Don't expand XIncludes when backtracking * Regressions - parser: Fix crash in xmlParseInNodeContext with HTML documents - Update to version 2.12.4 * Regressions - parser: Fix regression parsing standalone declarations - autotools: Readd --with-xptr-locs configuration option - parser: Fix build --without-output - parser: Don't grow or shrink pull parser memory buffers - io: Fix memory lifetime issue with input buffers - Update to version 2.12.3 * Regressions - parser: Fix namespaces redefined from default attributes * Build fixes - include: Rename XML_EMPTY helper macro - include: Move declaration of xmlInitGlobals - include: Add missing includes - include: Move globals from xmlsave.h to parser.h - include: Readd circular dependency between tree.h and parser.h - Drop libxml2-CVE-2024-25062.patch as it is part of upstream ==== libxml2-python ==== Version update (2.11.6 -> 2.12.6) - Update to version 2.12.6 * Regressions - parser: Fix detection of duplicate attributes in XML namespace - xmlreader: Fix xmlTextReaderConstEncoding - html: Fix htmlCreatePushParserCtxt with encoding - xmllint: Return error code if XPath returns empty nodeset - Update to version 2.12.5 * Security - [CVE-2024-25062] xmlreader: Don't expand XIncludes when backtracking * Regressions - parser: Fix crash in xmlParseInNodeContext with HTML documents - Update to version 2.12.4 * Regressions - parser: Fix regression parsing standalone declarations - autotools: Readd --with-xptr-locs configuration option - parser: Fix build --without-output - parser: Don't grow or shrink pull parser memory buffers - io: Fix memory lifetime issue with input buffers - Update to version 2.12.3 * Regressions - parser: Fix namespaces redefined from default attributes * Build fixes - include: Rename XML_EMPTY helper macro - include: Move declaration of xmlInitGlobals - include: Add missing includes - include: Move globals from xmlsave.h to parser.h - include: Readd circular dependency between tree.h and parser.h - Drop libxml2-CVE-2024-25062.patch as it is part of upstream ==== libzypp ==== Version update (17.32.4 -> 17.32.5) - Don't try to refresh volatile media as long as raw metadata are present (bsc#1223094) - version 17.32.5 (32) ==== llvm18 ==== Version update (18.1.3 -> 18.1.4) Subpackages: clang-tools clang18 libLLVM18 libclang-cpp18 libclang13 llvm18-gold - Update to version 18.1.4. * Fixes an issue with Arm64EC code generation where calls to some intrinsics implemented in compiler-rt used the wrong name mangling, eventually resulting in unresolved symbol errors during linking. * Fixed an incorrect poison-generating flag preservation in `InstSimplify`. It will fix a miscompilation on RISCV, which turns the incorrect `or disjoint` into an `add`. * Save/restore routines for RV32E/RV64E are added to compiler-rt. * Fix regressions introduced in LLVM 18.1.3 in MIPS atomicrmw min/max codegen. - Include module files for libc++ in libc++-devel. - Rebase llvm-do-not-install-static-libraries.patch. ==== openSUSE-release ==== Version update (20240419 -> 20240421) Subpackages: openSUSE-release-appliance-custom openSUSE-release-dvd - automatically generated by openSUSE-release-tools/pkglistgen ==== python-argcomplete ==== Version update (3.2.2 -> 3.3.0) - Update to 3.3.0 (bsc#1222880): * Preserve compatibility with argparse option tuples of length 4. This update is required to use argcomplete on Python 3.11.9+ or 3.12.3+. - update to 3.2.3: * Allow register-python-argcomplete output to be used as lazy-loaded zsh completion module (#475) - Move debug_stream initialization to helper method to allow fd 9 behavior to be overridden in subclasses (#471) ==== python-numpy ==== Version update (1.26.2 -> 1.26.4) - Update to 1.26.4 * NumPy 1.26.4 is a maintenance release that fixes bugs and regressions discovered after the 1.26.3 release. The Python versions supported by this release are 3.9-3.12. This is the last planned release in the 1.26.x series. * BUG: Restore missing asstr import * MAINT: prepare 1.26.x for further development * BUG: numpy.array_api: fix linalg.cholesky upper decomp... * MAINT, BLD: Fix unused inline functions warnings on clang * TST: Fix test_numeric on riscv64 * MAINT: add newaxis to __all__ in numpy.array_api * BUG: Use large file fallocate on 32 bit linux platforms * TST: Fix test_warning_calls on Python 3.12 * TST: Bump pytz to 2023.3.post1 * BUG: Fix AVX512 build flags on Intel Classic Compiler * BLD: fix potential issue with escape sequences in __config__.py * BLD: unvendor meson-python on 1.26.x and upgrade to meson-python... * MAINT: Include header defining backtrace * BUG: Fix np.quantile([Fraction(2,1)], 0.5) (#24711) - Release 1.26.3 [#]# Compatibility * f2py will no longer accept ambiguous -m and .pyf CLI combinations. When more than one .pyf file is passed, an error is raised. When both -m and a .pyf is passed, a warning is emitted and the -m provided name is ignored. [#]# Improvements * f2py now handles common blocks which have kind specifications from modules. This further expands the usability of intrinsics like iso_fortran_env and iso_c_binding. [#]# Pull requests merged * MAINT: prepare 1.26.x for further development * TYP: add None to __getitem__ in numpy.array_api * BLD,BUG: quadmath required where available [f2py] * BUG: alpha doesn't use REAL(10) * BUG: Fix FP overflow error in division when the divisor is scalar * MAINT: Pin scipy-openblas version. * BUG: Fix f2py to enable use of string optional inout argument * BUG: Fix -fsanitize=alignment issue in numpy/_core/src/multiarray/arraytypes.c.src * TST: Explicitly pass NumPy path to cython during tests (also... * BUG: fix issues with newaxis and linalg.solve in numpy.array_api * BUG: Disallow shadowed modulenames * BUG: Handle common blocks with kind specifications from modules * BUG: Fix moving compiled executable to root with f2py -c on Windows * BUG: Fix single to half-precision conversion on PPC64/VSX3 * TST: f2py: fix issue in test skip condition * Revert "MAINT: Pin scipy-openblas version." * MAINT: do not use long type * TST: PyPy needs another gc.collect on latest versions * MAINT: Bump conda-incubator/setup-miniconda from 2.2.0 to 3.0.1 * BLD: update vendored Meson for AIX shared library fix * MAINT: Init base in cpu_avx512_kn * BUG: Fix failing test_features on SapphireRapids * BUG: Fix non-contiguous memory load when ARM/Neon is enabled * MAINT,BUG: Never import distutils above 3.12 [f2py] * MAINT: make the import-time check for old Accelerate more specific * MAINT: Bump actions/setup-node and larsoner/circleci-artifacts-redirector-action * BUG: avoid seg fault from OOB access in RandomState.set_state() * BUG: Fix two errors related to not checking for failed allocations * BUG: Fix regression with f2py wrappers when modules and subroutines... * BUG: Fix build issues on SPR * BLD: fix uninitialized variable warnings from simd/neon/memory.h * BUG: Handle iso_c_type mappings more consistently * BUG: Fix module name bug in signature files [urgent] [f2py] * BUG: Handle .pyf.src and fix SciPy [urgent] * DOC: f2py rewrite with meson details * BUG: Add external library handling for meson [f2py] * MAINT: Run f2py's meson backend with the same python that ran... * MAINT: Update numpy/f2py/_backends from main. * MAINT: Easy updates of f2py/*.py from main. * MAINT: Update crackfortran.py and f2py2e.py from main ==== python311 ==== Version update (3.11.8 -> 3.11.9) Subpackages: python311-curses python311-dbm python311-x86-64-v3 - Add CVE-2023-52425-libexpat-2.6.0-backport.patch to fix tests with patched libexpat below 2.6.0 that doesn't update the version number, just in SLE. - Remove not needed upstream patches: * libexpat260.patch * CVE-2023-6597-TempDir-cleaning-symlink.patch, bsc#1219666 - Update to 3.11.9: * Security - gh-115398: Allow controlling Expat >=2.6.0 reparse deferral (CVE-2023-52425, bsc#1219559) by adding five new methods: xml.etree.ElementTree.XMLParser.flush() xml.etree.ElementTree.XMLPullParser.flush() xml.parsers.expat.xmlparser.GetReparseDeferralEnabled() xml.parsers.expat.xmlparser.SetReparseDeferralEnabled() xml.sax.expatreader.ExpatParser.flush() - gh-115399: Update bundled libexpat to 2.6.0 - gh-115243: Fix possible crashes in collections.deque.index() when the deque is concurrently modified. - gh-114572: ssl.SSLContext.cert_store_stats() and ssl.SSLContext.get_ca_certs() now correctly lock access to the certificate store, when the ssl.SSLContext is shared across multiple threads. * Core and Builtins - gh-116296: Fix possible refleak in object.__reduce__() internal error handling. - gh-116034: Fix location of the error on a failed assertion. - gh-115823: Properly calculate error ranges in the parser when raising SyntaxError exceptions caused by invalid byte sequences. Patch by Pablo Galindo - gh-112087: For an empty reverse iterator for list will be reduced to reversed(). Patch by Donghee Na. - gh-115011: Setters for members with an unsigned integer type now support the same range of valid values for objects that has a __index__() method as for int. - gh-96497: Fix incorrect resolution of mangled class variables used in assignment expressions in comprehensions. * Library - gh-117310: Fixed an unlikely early & extra Py_DECREF triggered crash in ssl when creating a new _ssl._SSLContext if CPython was built implausibly such that the default cipher list is empty or the SSL library it was linked against reports a failure from its C SSL_CTX_set_cipher_list() API. - gh-117178: Fix regression in lazy loading of self-referential modules, introduced in gh-114781. - gh-117084: Fix zipfile extraction for directory entries with the name containing backslashes on Windows. - gh-117110: Fix a bug that prevents subclasses of typing.Any to be instantiated with arguments. Patch by Chris Fu. - gh-90872: On Windows, subprocess.Popen.wait() no longer calls WaitForSingleObject() with a negative timeout: pass 0 ms if the timeout is negative. Patch by Victor Stinner. - gh-116957: configparser: Donât leave ConfigParser values in an invalid state (stored as a list instead of a str) after an earlier read raised DuplicateSectionError or DuplicateOptionError. - gh-90095: Ignore empty lines and comments in .pdbrc - gh-116764: Restore support of None and other false values in urllib.parse functions parse_qs() and parse_qsl(). Also, they now raise a TypeError for non-zero integers and non-empty sequences. - gh-116811: In PathFinder.invalidate_caches, delegate to MetadataPathFinder.invalidate_caches. - gh-116600: Fix repr() for global Flag members. - gh-116484: Change automatically generated tkinter.Checkbutton widget names to avoid collisions with automatically generated tkinter.ttk.Checkbutton widget names within the same parent widget. - gh-116401: Fix blocking os.fwalk() and shutil.rmtree() on opening named pipe. - gh-116143: Fix a race in pydoc _start_server, eliminating a window in which _start_server can return a thread that is âservingâ but without a docserver set. - gh-116325: typing: raise SyntaxError instead of AttributeError on forward references as empty strings. - gh-90535: Fix support of interval values > 1 in logging.TimedRotatingFileHandler for when='MIDNIGHT' and when='Wx'. - gh-115978: Disable preadv(), readv(), pwritev(), and writev() on WASI. - Under wasmtime for WASI 0.2, these functions donât pass test_posix (https://github.com/bytecodealliance/wasmtime/issues/7830). - gh-88352: Fix the computation of the next rollover time in the logging.TimedRotatingFileHandler handler. computeRollover() now always returns a timestamp larger than the specified time and works correctly during the DST change. doRollover() no longer overwrite the already rolled over file, saving from data loss when run at midnight or during repeated time at the DST change. - gh-87115: Set __main__.__spec__ to None when running a script with pdb - gh-76511: Fix UnicodeEncodeError in email.Message.as_string() that results when a message that claims to be in the ascii character set actually has non-ascii characters. Non-ascii characters are now replaced with the U+FFFD replacement character, like in the replace error handler. - gh-75988: Fixed unittest.mock.create_autospec() to pass the call through to the wrapped object to return the real result. - gh-115881: Fix issue where ast.parse() would incorrectly flag conditional context managers (such as with (x() if y else z()): ... changelog too long, skipping 156 lines ... 64-bit platforms. ==== python311-core ==== Version update (3.11.8 -> 3.11.9) Subpackages: libpython3_11-1_0 libpython3_11-1_0-x86-64-v3 python311-base python311-base-x86-64-v3 - Add CVE-2023-52425-libexpat-2.6.0-backport.patch to fix tests with patched libexpat below 2.6.0 that doesn't update the version number, just in SLE. - Remove not needed upstream patches: * libexpat260.patch * CVE-2023-6597-TempDir-cleaning-symlink.patch, bsc#1219666 - Update to 3.11.9: * Security - gh-115398: Allow controlling Expat >=2.6.0 reparse deferral (CVE-2023-52425, bsc#1219559) by adding five new methods: xml.etree.ElementTree.XMLParser.flush() xml.etree.ElementTree.XMLPullParser.flush() xml.parsers.expat.xmlparser.GetReparseDeferralEnabled() xml.parsers.expat.xmlparser.SetReparseDeferralEnabled() xml.sax.expatreader.ExpatParser.flush() - gh-115399: Update bundled libexpat to 2.6.0 - gh-115243: Fix possible crashes in collections.deque.index() when the deque is concurrently modified. - gh-114572: ssl.SSLContext.cert_store_stats() and ssl.SSLContext.get_ca_certs() now correctly lock access to the certificate store, when the ssl.SSLContext is shared across multiple threads. * Core and Builtins - gh-116296: Fix possible refleak in object.__reduce__() internal error handling. - gh-116034: Fix location of the error on a failed assertion. - gh-115823: Properly calculate error ranges in the parser when raising SyntaxError exceptions caused by invalid byte sequences. Patch by Pablo Galindo - gh-112087: For an empty reverse iterator for list will be reduced to reversed(). Patch by Donghee Na. - gh-115011: Setters for members with an unsigned integer type now support the same range of valid values for objects that has a __index__() method as for int. - gh-96497: Fix incorrect resolution of mangled class variables used in assignment expressions in comprehensions. * Library - gh-117310: Fixed an unlikely early & extra Py_DECREF triggered crash in ssl when creating a new _ssl._SSLContext if CPython was built implausibly such that the default cipher list is empty or the SSL library it was linked against reports a failure from its C SSL_CTX_set_cipher_list() API. - gh-117178: Fix regression in lazy loading of self-referential modules, introduced in gh-114781. - gh-117084: Fix zipfile extraction for directory entries with the name containing backslashes on Windows. - gh-117110: Fix a bug that prevents subclasses of typing.Any to be instantiated with arguments. Patch by Chris Fu. - gh-90872: On Windows, subprocess.Popen.wait() no longer calls WaitForSingleObject() with a negative timeout: pass 0 ms if the timeout is negative. Patch by Victor Stinner. - gh-116957: configparser: Donât leave ConfigParser values in an invalid state (stored as a list instead of a str) after an earlier read raised DuplicateSectionError or DuplicateOptionError. - gh-90095: Ignore empty lines and comments in .pdbrc - gh-116764: Restore support of None and other false values in urllib.parse functions parse_qs() and parse_qsl(). Also, they now raise a TypeError for non-zero integers and non-empty sequences. - gh-116811: In PathFinder.invalidate_caches, delegate to MetadataPathFinder.invalidate_caches. - gh-116600: Fix repr() for global Flag members. - gh-116484: Change automatically generated tkinter.Checkbutton widget names to avoid collisions with automatically generated tkinter.ttk.Checkbutton widget names within the same parent widget. - gh-116401: Fix blocking os.fwalk() and shutil.rmtree() on opening named pipe. - gh-116143: Fix a race in pydoc _start_server, eliminating a window in which _start_server can return a thread that is âservingâ but without a docserver set. - gh-116325: typing: raise SyntaxError instead of AttributeError on forward references as empty strings. - gh-90535: Fix support of interval values > 1 in logging.TimedRotatingFileHandler for when='MIDNIGHT' and when='Wx'. - gh-115978: Disable preadv(), readv(), pwritev(), and writev() on WASI. - Under wasmtime for WASI 0.2, these functions donât pass test_posix (https://github.com/bytecodealliance/wasmtime/issues/7830). - gh-88352: Fix the computation of the next rollover time in the logging.TimedRotatingFileHandler handler. computeRollover() now always returns a timestamp larger than the specified time and works correctly during the DST change. doRollover() no longer overwrite the already rolled over file, saving from data loss when run at midnight or during repeated time at the DST change. - gh-87115: Set __main__.__spec__ to None when running a script with pdb - gh-76511: Fix UnicodeEncodeError in email.Message.as_string() that results when a message that claims to be in the ascii character set actually has non-ascii characters. Non-ascii characters are now replaced with the U+FFFD replacement character, like in the replace error handler. - gh-75988: Fixed unittest.mock.create_autospec() to pass the call through to the wrapped object to return the real result. - gh-115881: Fix issue where ast.parse() would incorrectly flag conditional context managers (such as with (x() if y else z()): ... changelog too long, skipping 156 lines ... 64-bit platforms. ==== virt-v2v ==== Subpackages: virt-v2v-bash-completion - Add Requires for dhcp-client - Add conditional x86_64 arch Requires for nbdkit-vddk-plugin ==== virtualbox ==== - Fix build error on Factory;Staging due to libxml 2.12.6. Added file libxml21206.patch. Added file kernel-6.9.patch to fix builds on kernel 6.9. ==== virtualbox-kmp ==== Version update (7.0.14_k6.8.6_1 -> 7.0.14_k6.8.7_1) - Fix build error on Factory;Staging due to libxml 2.12.6. Added file libxml21206.patch. Added file kernel-6.9.patch to fix builds on kernel 6.9. ==== xfsprogs ==== Version update (6.6.0 -> 6.7.0) Subpackages: libhandle1 - update to 6.7.0 - xfsprogs: Several configure script updates - xfs_io: Use system's SEEK_DATA and SEEK_HOLE definition - xfsprogs: Remove platform_defs.h generation on build time - xfs_db: Fix metadata read error due hardcoded initialization of bb_count - xfsprogs: Request 64-bit time_t where possible - xfsprogs: Remove use of LFS64 interfaces

1 0

Release engineerng call on 24th April is cancelled because of SUSE Labs
by Lubos Kocman 23 Apr '24

23 Apr '24

Hello openSUSE! I cancelled tomorrow's openSUSE release call as most people from the call are attending SUSE Labs conference in Czechia. The event is already cancelled in https://calendar.opensuse.org/ If you'd stll like to provide an update feel free to use https://etherpad.opensuse.org/p/ReleaseEngineering-20240424 -- Best regards Luboš Kocman openSUSE Leap Release Manager

1 0