December 2020 - openSUSE Factory - openSUSE Mailing Lists

System freeze with kernel 5.9.x series
by Frans de Boer 14 Dec '20

14 Dec '20

LS, There was a discussion before about intermittent screen freezes using TW and the 5.9.x kernel. Some blamed the Intel graphics, while I had experienced this same effect with AMD, NVIDEA and Intel and have reported that also in mentioned thread. I have not seen any message that the problem has been tracked and is/will be corrected. Today, I did an update to 5.9.12, started a rsync session (within the standard Plasma KDE environment) to download a whole nongnu repository and stopped all programs using the displays. I did this because I had noticed and reported that too, that the freeze problem occurs mainly when the network is rather busy and I stressed the display usage. I wanted to see if the network alone could freeze the system. The result, it was a DEEP FREEZE!!. Only a system reset would bring the system back to life. It is unclear how long it took to get a system wide freeze, - was not there to watch due to some late minute shopping - but it must have been anywhere between one to two hours before this occurred. There is no such issue with the 5.8.15 kernel detected. So - again - don't look at the visible effect, but rather look at the network portion within 5.9.x. Anyhow, this issue has plagued the OpenSuse kernel 5.9.x series long enough. I hope this issue is resolved when moving forward to the 5.10 kernel series. Regards, Frans. -- A: Yes, just like that A: Ja, net zo Q: Oh, Just like reading a book backwards Q: Oh, net als een boek achterstevoren lezen A: Because it upsets the natural flow of a story A: Omdat het de natuurlijke gang uit het verhaal haalt Q: Why is top-posting annoying? Q: Waarom is Top-posting zo irritant?

2 1

New Tumbleweed snapshot 20201213 released!
by Dominique Leuenberger 14 Dec '20

14 Dec '20

Please note that this mail was generated by a script. The described changes are computed based on the x86_64 DVD. The full online repo contains too many changes to be listed here. Please check the known defects of this snapshot before upgrading: https://openqa.opensuse.org/tests/overview?distri=opensuse&groupid=1&versio… Please do not reply to this email to report issues, rather file a bug on bugzilla.opensuse.org. For more information on filing bugs please see https://en.opensuse.org/openSUSE:Submitting_bug_reports Packages changed: gstreamer-devtools (1.18.1 -> 1.18.2) gstreamer-editing-services (1.18.1 -> 1.18.2) kdevelop5 (5.6.0 -> 5.6.1) kernel-source (5.9.12 -> 5.9.14) patterns-yast (20191229 -> 20201210) python-gst (1.18.1 -> 1.18.2) xapps (1.6.10 -> 2.0.0) xreader (2.6.4 -> 2.8.0) === Details === ==== gstreamer-devtools ==== Version update (1.18.1 -> 1.18.2) Subpackages: libgstvalidate-1_0-0 typelib-1_0-GstValidate-1_0 - Update to version 1.18.2: + No changes. - Tweak _service file. ==== gstreamer-editing-services ==== Version update (1.18.1 -> 1.18.2) Subpackages: libges-1_0-0 typelib-1_0-GES-1_0 - Update to version 1.18.2: + Fix static build + ges_init(): Fix potential initialisation crash on error - Fix the _service file and spec to really use the tarball generated by service. ==== kdevelop5 ==== Version update (5.6.0 -> 5.6.1) Subpackages: kdevelop5-lang kdevplatform kdevplatform-lang libkdevplatform56 - Update to 5.6.1 * Fix support for gdb 10.x (kde#428688) * Fix an issue in the "Run test" feature with tests launched by the same executable (kde#377639) * Fix several crashes on exit while debugging (kde#425994, kde#425993, kde#425985) * The output view now highlights glibc assert messages by default * Less confusing behaviour of the "Stop" and "Stop all" toolbar buttons (it no longer has a delayed-dropdown) * Fix a set of oddities with initial parsing of project files * Fix a crash when closing KDevelop directly after opening a large project (kde#427387, kde#427386) * Fix a crash in some cases when launching an executable (kde#399511, kde#416874) * Improved support for changing the CMake_BUILD_TYPE in projects (kde#429605) * Fix a crash when the problem reporter plugin was turned off during runtime * Various other small bug fixes * Various smaller performance improvements ==== kernel-source ==== Version update (5.9.12 -> 5.9.14) Subpackages: kernel-default kernel-docs - drm/i915/gt: Declare gen9 has 64 mocs entries! (git-fixes). - commit c648a46 - Linux 5.9.14 (bsc#1012628). - usb: gadget: f_fs: Use local copy of descriptors for userspace copy (bsc#1012628). - USB: serial: kl5kusb105: fix memleak on open (bsc#1012628). - USB: serial: ch341: add new Product ID for CH341A (bsc#1012628). - USB: serial: ch341: sort device-id entries (bsc#1012628). - USB: serial: option: add Fibocom NL668 variants (bsc#1012628). - USB: serial: option: add support for Thales Cinterion EXS82 (bsc#1012628). - USB: serial: option: fix Quectel BG96 matching (bsc#1012628). - speakup: Reject setting the speakup line discipline outside of speakup (bsc#1012628). - ALSA: hda/realtek: Fix bass speaker DAC assignment on Asus Zephyrus G14 (bsc#1012628). - ALSA: hda/realtek: Add mute LED quirk to yet another HP x360 model (bsc#1012628). - ALSA: hda/realtek: Enable headset of ASUS UX482EG & B9400CEA with ALC294 (bsc#1012628). - ALSA: hda/realtek - Add new codec supported for ALC897 (bsc#1012628). - ALSA: hda/realtek - Fixed Dell AIO wrong sound tone (bsc#1012628). - ALSA: hda/generic: Add option to enforce preferred_dacs pairs (bsc#1012628). - ring-buffer: Update write stamp with the correct ts (bsc#1012628). - ring-buffer: Set the right timestamp in the slow path of __rb_reserve_next() (bsc#1012628). - ring-buffer: Always check to put back before stamp when crossing pages (bsc#1012628). - ftrace: Fix updating FTRACE_FL_TRAMP (bsc#1012628). - ftrace: Fix DYNAMIC_FTRACE_WITH_DIRECT_CALLS dependency (bsc#1012628). - cifs: allow syscalls to be restarted in __smb_send_rqst() (bsc#1012628). - cifs: fix potential use-after-free in cifs_echo_request() (bsc#1012628). - cifs: refactor create_sd_buf() and and avoid corrupting the buffer (bsc#1012628). - cifs: add NULL check for ses->tcon_ipc (bsc#1012628). - gfs2: Upgrade shared glocks for atime updates (bsc#1012628). - gfs2: Fix deadlock between gfs2_{create_inode,inode_lookup} and delete_work_func (bsc#1012628). - s390/pci: fix CPU address in MSI for directed IRQ (bsc#1012628). - i2c: imx: Fix reset of I2SR_IAL flag (bsc#1012628). - i2c: imx: Check for I2SR_IAL after every byte (bsc#1012628). - i2c: imx: Don't generate STOP condition if arbitration has been lost (bsc#1012628). - tracing: Fix userstacktrace option for instances (bsc#1012628). - thunderbolt: Fix use-after-free in remove_unplugged_switch() (bsc#1012628). - drm/omap: sdi: fix bridge enable/disable (bsc#1012628). - drm/amdgpu/vcn3.0: stall DPG when WPTR/RPTR reset (bsc#1012628). - drm/amdgpu/vcn3.0: remove old DPG workaround (bsc#1012628). - drm/i915/gt: Retain default context state across shrinking (bsc#1012628). - drm/i915/gt: Limit frequency drop to RPe on parking (bsc#1012628). - drm/i915/gt: Program mocs:63 for cache eviction on gen9 (bsc#1012628). - KVM: PPC: Book3S HV: XIVE: Fix vCPU id sanity check (bsc#1012628). - scsi: mpt3sas: Fix ioctl timeout (bsc#1012628). - io_uring: fix recvmsg setup with compat buf-select (bsc#1012628). - dm writecache: advance the number of arguments when reporting max_age (bsc#1012628). - dm writecache: fix the maximum number of arguments (bsc#1012628). - powerpc/64s/powernv: Fix memory corruption when saving SLB entries on MCE (bsc#1012628). - genirq/irqdomain: Add an irq_create_mapping_affinity() function (bsc#1012628). - powerpc/pseries: Pass MSI affinity to irq_create_mapping() (bsc#1012628). - dm: fix bug with RCU locking in dm_blk_report_zones (bsc#1012628). - dm: fix double RCU unlock in dm_dax_zero_page_range() error path (bsc#1012628). - dm: remove invalid sparse __acquires and __releases annotations (bsc#1012628). - x86/uprobes: Do not use prefixes.nbytes when looping over prefixes.bytes (bsc#1012628). - coredump: fix core_pattern parse error (bsc#1012628). - mm: list_lru: set shrinker map bit when child nr_items is not zero (bsc#1012628). - mm/swapfile: do not sleep with a spin lock held (bsc#1012628). - hugetlb_cgroup: fix offline of hugetlb cgroup with reservations (bsc#1012628). - Revert "amd/amdgpu: Disable VCN DPG mode for Picasso" (bsc#1012628). - iommu/amd: Set DTE[IntTabLen] to represent 512 IRTEs (bsc#1012628). - mm: memcg/slab: fix obj_cgroup_charge() return value handling (bsc#1012628). - lib/syscall: fix syscall registers retrieval on 32-bit platforms (bsc#1012628). - can: af_can: can_rx_unregister(): remove WARN() statement from list operation sanity check (bsc#1012628). - gfs2: check for empty rgrp tree in gfs2_ri_update (bsc#1012628). - netfilter: ipset: prevent uninit-value in hash_ip6_add (bsc#1012628). - ASoC: wm_adsp: fix error return code in wm_adsp_load() (bsc#1012628). - gfs2: Fix deadlock dumping resource group glocks (bsc#1012628). - gfs2: Don't freeze the file system during unmount (bsc#1012628). - rtw88: debug: Fix uninitialized memory in debugfs code (bsc#1012628). - i2c: qcom: Fix IRQ error misassignement (bsc#1012628). - i2c: qup: Fix error return code in qup_i2c_bam_schedule_desc() (bsc#1012628). - dm writecache: remove BUG() and fail gracefully instead (bsc#1012628). - Input: i8042 - fix error return code in i8042_setup_aux() (bsc#1012628). - netfilter: nf_tables: avoid false-postive lockdep splat (bsc#1012628). - netfilter: nftables_offload: set address type in control dissector (bsc#1012628). - netfilter: nftables_offload: build mask based from the matching bytes (bsc#1012628). - x86/insn-eval: Use new for_each_insn_prefix() macro to loop over prefixes bytes (bsc#1012628). - Revert "geneve: pull IP header before ECN decapsulation" (bsc#1012628). - bpf: Fix propagation of 32-bit signed bounds from 64-bit bounds (bsc#1012628). - commit 960bcea - Update patches.suse/tty-Fix-pgrp-locking-in-tiocspgrp.patch (bsc#1179745 CVE-2020-29661). - Update patches.suse/tty-Fix-session-locking.patch (bsc#1179745 CVE-2020-29660). Add CVE numbers. - commit 1329f77 - Update config files to disable CONFIG_DEBUG_SECTION_MISMATCH (bsc#1177403) - commit a0a476d - Linux 5.9.13 (bsc#1012628). - devlink: Hold rtnl lock while reading netdev attributes (bsc#1012628). - devlink: Make sure devlink instance and port are in same net namespace (bsc#1012628). - ipv6: addrlabel: fix possible memory leak in ip6addrlbl_net_init (bsc#1012628). - net/af_iucv: set correct sk_protocol for child sockets (bsc#1012628). - net: openvswitch: fix TTL decrement action netlink message format (bsc#1012628). - net/tls: missing received data after fast remote close (bsc#1012628). - net/tls: Protect from calling tls_dev_del for TLS RX twice (bsc#1012628). - rose: Fix Null pointer dereference in rose_send_frame() (bsc#1012628). - sock: set sk_err to ee_errno on dequeue from errq (bsc#1012628). - tcp: Set INET_ECN_xmit configuration in tcp_reinit_congestion_control (bsc#1012628). - tun: honor IOCB_NOWAIT flag (bsc#1012628). - usbnet: ipheth: fix connectivity with iOS 14 (bsc#1012628). - vsock/virtio: discard packets only when socket is really closed (bsc#1012628). - mptcp: fix NULL ptr dereference on bad MPJ (bsc#1012628). - net/packet: fix packet receive on L3 devices without visible hard header (bsc#1012628). - netfilter: bridge: reset skb->pkt_type after NF_INET_POST_ROUTING traversal (bsc#1012628). - ipv4: Fix tos mask in inet_rtm_getroute() (bsc#1012628). - dt-bindings: net: correct interrupt flags in examples (bsc#1012628). - chelsio/chtls: fix panic during unload reload chtls (bsc#1012628). - ibmvnic: Ensure that SCRQ entry reads are correctly ordered (bsc#1012628). - ibmvnic: Fix TX completion error handling (bsc#1012628). - tipc: fix incompatible mtu of transmission (bsc#1012628). - inet_ecn: Fix endianness of checksum update when setting ECT(1) (bsc#1012628). - geneve: pull IP header before ECN decapsulation (bsc#1012628). - net: ip6_gre: set dev->hard_header_len when using header_ops (bsc#1012628). - dpaa_eth: copy timestamp fields to new skb in A-050385 workaround (bsc#1012628). - cxgb3: fix error return code in t3_sge_alloc_qset() (bsc#1012628). - net: pasemi: fix error return code in pasemi_mac_open() (bsc#1012628). - vxlan: fix error return code in __vxlan_dev_create() (bsc#1012628). - chelsio/chtls: fix a double free in chtls_setkey() (bsc#1012628). - net: mvpp2: Fix error return code in mvpp2_open() (bsc#1012628). - net: skbuff: ensure LSE is pullable before decrementing the MPLS ttl (bsc#1012628). - net: openvswitch: ensure LSE is pullable before reading it (bsc#1012628). - net/sched: act_mpls: ensure LSE is pullable before reading it (bsc#1012628). - net/mlx5: DR, Proper handling of unsupported Connect-X6DX SW steering (bsc#1012628). - net/mlx5: Fix wrong address reclaim when command interface is down (bsc#1012628). - net: mlx5e: fix fs_tcp.c build when IPV6 is not enabled (bsc#1012628). - ALSA: usb-audio: US16x08: fix value count for level meters (bsc#1012628). - Input: xpad - support Ardwiino Controllers (bsc#1012628). - Input: i8042 - add ByteSpeed touchpad to noloop table (bsc#1012628). - Input: atmel_mxt_ts - fix lost interrupts (bsc#1012628). - tracing: Fix alignment of static buffer (bsc#1012628). - tracing: Remove WARN_ON in start_thread() (bsc#1012628). - uapi: fix statx attribute value overlap for DAX & MOUNT_ROOT (bsc#1012628). - drm/i915/gt: Fixup tgl mocs for PTE tracking (bsc#1012628). - commit 3dfd18b - tty: Fix ->session locking (bsc#1179745). - tty: Fix ->pgrp locking in tiocspgrp() (bsc#1179745). - commit 9455f8b - net/x25: prevent a couple of overflows (bsc#1178590). - commit 2a06597 ==== patterns-yast ==== Version update (20191229 -> 20201210) Subpackages: patterns-yast-x11_yast patterns-yast-yast2_basis patterns-yast-yast2_desktop patterns-yast-yast2_install_wf patterns-yast-yast2_server - Do not recomment yast2-fonts (bsc#1179866). - 20201210 ==== python-gst ==== Version update (1.18.1 -> 1.18.2) - Update to version 1.18.2: + No changes. ==== xapps ==== Version update (1.6.10 -> 2.0.0) Subpackages: libxapp1 typelib-1_0-XApp-1_0 xapps-common xapps-common-lang - Update to version 2.0.0. * Bump for favorites support * .gitignore: Ignore the new debian build folder. * favorites: expose xapp_favorites_rename (), it was mistakenly made private during some cleanup. * xapp-gtk3-module.c: Don't initialize favorites until they're needed. * xapp-gtk3-module.c: Register the favorites uri scheme immediately, rather than when XAppFavorites is instantiated. * xapp-favorites: Add missing pointer to the DestroyData. * l10n: Update POT - Updates since 1.6.10. * sn-watcher.c: Move invocation completion to the registration callback. * sn-item.c: use a different method of fetching the pixmap. * Make property-retrieval fully asynchronous. * mate-xapp-status-applet.py: Adapt to change brought by 9c4d5e92d2eb288. * build: Allow making a library-only build for flatpak packaging. * xapp-icon-chooser-button.c: Remove leftover debugging line. * xapp-sn-watcher: Create StatusNotifierItem proxies asynchronously, and don't try to load their properties. * xapp-sn-watcher: Add an app list to flag items that should have their tooltip replaced by the application name. * build: Make build of xapp-sn-watcher optional, defaulting to true. * xapp-sn-watcher: Add key to disable StatusNotifier support, but leave appindicator support enabled. * l10n: Update translations * Update docs * xapp-status-icon.c: Get rid of the dead 'shadow' region around menus, as they can interfere with clicking on the icon to close the menu. * xapp-status-icon: Add new properties for menu/button state handling and one for metadata (miscellaneous info to help define behavior in the status applets). * xapp-sn-watcher: Set status icon metadata for appindicator icons, to inform the applet to highlight/toggle the panel icon with either button click when opening the menu. * mate-xapp-status-applet.py: Use new properties to sync button toggle state with the menu state. * test-scripts: Update some scripts to demonstrate new property use. * sn-item: Remove support for XAyatanaLabel. * xapp-sn-watcher: Update clear the registration list before freeing the table of registered items. * xapp-status-icon.c: Add xapp_status_icon_popup_menu() and use a more reliable GtkMenu popup method. * xapp-status-icon.c: Fix inadvertant verison change in doc string. * Icons: Add symbolic icons for xreaders annotation features * xapp-status-icon: Add a get_visible method. * mate applet: Use markup for tooltips, and update test script to reflect this as well. * mate-xapp-status-applet: Fix set icon error handling when an icon name is missing. * xapp-status-icon: Add a get_visible method. * mate applet: Use markup for tooltips, and update test script to reflect this as well. * mate-xapp-status-applet: Fix set icon error handling when an icon name is missing. * Update documentation * README: Update link to docs * Update README.md * xapp-util.c: Initialize auto variables. * Icons: add pin/unpin symbolic (#90) * Icons: Add xapp-diaporama-symbolic * xapp-sn-watcher: Add autostart file, to start at session, to start at the session initialization phase. * Add a utility function to check for nvidia on-demand mode. * xapp-sn-watcher: Don't enable in MATE * l10n: Fix makepot picking up unwanted service file * Eliminate all appindicator-specific code from xapp-status-icon.c, Add a whitelist for xapp-sn-watcher to list ai icons that should left-click to activate. * l10n: Fix makepot picking up unwanted service file * Eliminate all appindicator-specific code from xapp-status-icon.c, Add a whitelist for xapp-sn-watcher to list ai icons that should left-click to activate. * xapp-sn-watcher: Add a whitelist to manage what desktop environments to start in. * Add option to specify path to pygobject override directory * Install icons and scripts using meson options * xapp-status-icon.c: Sync the visible state of the fallback GtkStatusIcon when it is first created. * xapp-status-icon.c: Fix the timeout duration for xapp_status_icon_any_monitors. * Remove use of deprecated g_type_class_add_private function. * xapp-monitor-blanker: Use G_DECLARE_FINAL_TYPE * xapp-status-icon.c: check if we have a fallback status icon before disconnecting signals from it. * xapp-status-icon.c: Only call gtk_status_icon_set_name() when explicitly requested. * Add StatusNotifier watcher. * mate applet: Set the new icon size property (this provides a hint to xapp-sn-watcher or any client app to provide a correct icon size in some situations). * status icon: Add support for scroll events * debian: Remove python2 deps. * debian/control: Add missing dbusmenu dependency. * Packaging: Re-add python-gi-dev as build-dep * xapp-sn-watcher: rewrite in C due to leaky dbus python bindings. - Removed xapps-python3.patch, fixed. - Removed gtkstatusicon-fix.patch, fixed - Add fix_sn-item_control_reaches_end_of_non-void_function.patch to fix Fix control reaches end of non-void function in sn-item.c ==== xreader ==== Version update (2.6.4 -> 2.8.0) Subpackages: libxreaderdocument3 libxreaderview3 xreader-lang xreader-plugin-comicsdocument xreader-plugin-djvudocument xreader-plugin-dvidocument xreader-plugin-epubdocument xreader-plugin-pdfdocument xreader-plugin-pixbufdocument xreader-plugin-psdocument xreader-plugin-tiffdocument xreader-plugin-xpsdocument - Update to version 2.8.0. * Get toolbar visibility from GtkRevealer when saving view metadata * Add g_assert_not_reached to sizing_mode_to_string * setting to hide/show menubar (WIP) * Update menubar toggle action on init * fix saving menubar visibility as default * Added logic to fix issue of Tab key toggling checkboxes * Fix mimetype handling and backend selection: * Clean up build files * Fix for #89. Added logic to allow for cursor position to change in multiline-text fields * Added keyboard shortcut for toolbar * Fix for #442. Added null check to stop segfault with annotations * Implemented ticket #241. Added show sidebar button to toolbar * Move the new sidebar button to be part of the navigation group on the left end of the toolbar. * Added keyboard shortcuts to history buttons * Favorites - rework startup page to display both favorites and recents, add favorites to the file menu. * Disable pixbuf support properly. * ev-window.c: Temporarily disable menu toggling using the alt key. * Implements ticket #279. Added Go To Page By Number to menu * Displays entire label in tooltip * Revert "Implements ticket #279. Added Go To Page By Number to menu" * l10n: Fix po/POTFILES.in * ev-window-title.c: Don't show "Recent Documents" in the landing page titlebar - it is no longer showing only recents. * l10n: Update POT - Removed fix_ev-window.c_error.patch, fixed. - Add fix_no_return_statement_ev-application.c.patch to fix /shell/ev-application.c error no return statement in function returning non-void.

1 0

[opensuse-factory] Announcement: Run openQA tests with isotovideo in your CI pipelines
by Oliver Kurz 14 Dec '20

14 Dec '20

To all users of openQA or anyone interested in running system-level tests in CI jobs, I would like to make you aware of a new approach for running system-level tests using "isotovideo", the main backend of openQA tests, within continuous integration (CI) services, for example github actions, travis CI, gitlab CI, etc. Following an updated section https://github.com/os-autoinst/os-autoinst#getting-started it is possible to run "openQA tests" using a simple, convenient container based on tests that can be provided for example in a git repository. An easy example is described in https://github.com/os-autoinst/os-autoinst-distri-example#local-testing-and… Find the latest example CI run directly following https://github.com/os-autoinst/os-autoinst-distri-example/actions I consider the above approach very suitable if one wants to run system level tests following the "openQA test API" in any project where direct feedback from CI jobs is appreciated but only a limited number of test scenarios are needed, no heavy visual tests are run where the openQA web UI would provide a more convenient interface, or when wanting to test changes to already existing openQA tests but in pull requests before they are merged. For more elaborate examples a complete openQA setup is more suitable. If you want to read more about openQA in general visit http://open.qa/ There is also a single HTML file document http://open.qa/docs/ as well as a PDF version http://open.qa/docs/current.pdf Have fun, Oliver

2 2

Tumbleweed - Review of the week 2020/50
by Dominique Leuenberger / DimStar 13 Dec '20

13 Dec '20

Dear Tumbleweed users and hackers, The weekly review for 2020/50 is a bit late, but technically, it is still week 50, so ‘just in time’. Since my last review, Tumbleweed has managed to publish 5 snapshots (1203, 1205, 1207, 1209 and 1211). The fact that they are 2-day intervals is pure co-incidence and by no means planned. 1204 simply never was published, as 1205 reached QA before all reviews could be completed and the snapshot was discarded. 1206 was not produced, as I skipped the check-ins last Sunday. 1208 was again a ‘too fast build compared to test time; and 1210 was discarded due to packaging / build issues around the kubernetes 1.20 updates. Anyway, the five snapshots that were published accumulated these changes: * KDE Plasma 5.20.4 * gdb 10.1: now with debuginfod support * Pulseaudio 14.0 * Mozilla Thunderbird 78.5.1 * Linux kernel 5.9.12 * SQLite 3.34.0 * Mesa 20.2.4 * NetworkManager 1.28.0 * QEmu 5.2.0 * Wine 6.0 rc1 * Kubernetes 1.20 The staging projects are currently filled with these updates/changes: * KDE Applications 20.12 (currently RC being tested) * icu 68.1: breaks a couple of builds (Staging:I) * brp-check-suse: a bug fix in how it detected dangling symlinks (it detected them, but did not fail as it was supposed to) * permissions package: prepares for easier listing, while supporting a full /usr merge * RPM 4.16: still a few packages build failures (Mozilla *, openblas) * Ruby 3.0: mainly YaST not ready for that switch. We are likely to stay on 2.7 as ‘default ruby’ version, but add rubygem packages for Ruby 3.0 by end of the year * First experiments with rpmlint 2.0 started in Staging:M * openssl 3.0: currently alpha 9 in Staging:O Cheers, Dominique

1 0

Package removal: sawfish
by Dominique Leuenberger / DimStar 12 Dec '20

12 Dec '20

Dear Tumbleweed users and hacker, 10 days ago I have filed a delete request against openSUSE:Factory/sawfish. The package has had the last successful build on 2019-10-11 16:52:05 and the first failed recored at 2020-05-30 21:01:20 Since then, no fixes were submitted, and the delete request did also not get any comments - implying that the package is abandoned Together with sawfish, this will also hit the package sawfish-pager (which does build at the moment, but without sawfish becomes useless). Is there anybody that would like sawfish to remain and wants to give a stab at fixing it? If so, please let me knwo - so we can stop the DR. Of course, even if deleted, the package can be re-added at any moment if/when it builds again. Cheers, Dominique

3 3

New Tumbleweed snapshot 20201211 released!
by Dominique Leuenberger 12 Dec '20

12 Dec '20

Please note that this mail was generated by a script. The described changes are computed based on the x86_64 DVD. The full online repo contains too many changes to be listed here. Please check the known defects of this snapshot before upgrading: https://openqa.opensuse.org/tests/overview?distri=opensuse&groupid=1&versio… Please do not reply to this email to report issues, rather file a bug on bugzilla.opensuse.org. For more information on filing bugs please see https://en.opensuse.org/openSUSE:Submitting_bug_reports Packages changed: busybox-links drbd (9.0.25~0+git.bd41626d -> 9.0.26~0+git.9114a038) kcm5-fcitx libressl (3.2.2 -> 3.2.3) lightdm mdevctl (0.61 -> 0.78) openldap2 (2.4.55 -> 2.4.56) perl-Mojolicious (8.66 -> 8.67) polkit-default-privs (1550+20201119.2c1dce4 -> 1550+20201208.135bf51) postgresql13 qemu (5.1.0 -> 5.2.0) remmina (1.4.9 -> 1.4.10) rubygem-autoprefixer-rails (10.0.1.3 -> 10.1.0.0) rubygem-erubi (1.9.0 -> 1.10.0) rubygem-loofah (2.7.0 -> 2.8.0) rubygem-passenger (6.0.6 -> 6.0.7) rubygem-puma (5.0.4 -> 5.1.1) rubygem-tzinfo (2.0.2 -> 2.0.3) rubygem-zeitwerk (2.4.1 -> 2.4.2) scim supermin (5.1.20 -> 5.2.0) virtualbox (6.1.14 -> 6.1.16) virtualbox-kmp (6.1.14_k5.9.12_1 -> 6.1.16_k5.9.12_1) xdm yast2-network (4.3.30 -> 4.3.31) === Details === ==== busybox-links ==== Subpackages: busybox-coreutils busybox-findutils busybox-gawk busybox-grep busybox-gzip busybox-patch busybox-psmisc busybox-sed busybox-sendmail busybox-tar busybox-xz - busybox-adduser needs "nogroup" for system accounts, which have no group specified. ==== drbd ==== Version update (9.0.25~0+git.bd41626d -> 9.0.26~0+git.9114a038) Subpackages: drbd-kmp-default - bsc#1179708, compat to kernel v5.10 - Add patch compat_get_fs.patch Add patch remove_bdi_cap_stable_writes.patch - Update to 9.0.26 * fix a case of a disk unexpectedly becoming Outdated by moving the exchange of the initial packets into the body of the two-phase-commit that happens at a connect * fix adding of new volumes to resources with a primary node * reliably detect split brain situation on both nodes * fix an unexpected occurrence of NetworkFailure state in a tight drbdsetup disconnect; drbdsetup connect sequence * fix online verify to return to Established from VerifyS if the VerifyT node was temporarily Inconsistent during the run * fix a corner case where a node ends up Outdated after the crash and rejoin of a primary node * implement 'blockdev --setro' in DRBD * following upstream changes to DRBD up to Linux 5.9 and ensure compatibility with Linux 5.8 and 5.9 * fix a crash if during resync a discard operation fails on the resync-target node * fix online verify to not clamp disk states to UpToDate * fix promoting resync-target nodes; the problem was that it could modify the bitmap of an ongoing resync; which leads to alarming log messages * pause a resync if the sync-source node becomes inconsistent; an example is a cascading resync where the upstream resync aborts and leaves the sync-source node for the downstream resync with an inconsistent disk; note, the node at the end of the chain could still have an outdated disk (better than inconsistent) * allow force primary on a sync-target node by breaking the resync * minor fixes to the compat tests * fix for writes not getting mirrored over a connection while the primary transitions through the WFBitMapS state * completed missing logic of the new two-phase-commit based connect process; avoid connecting partitions with a primary in each; ensure consistent decisions if the connect attempt will be retried - Add patch compat-test-header.patch Add patch submit-bio-private-date.patch - Remove patch rely-on-sb-handlers.patch (187bddac0) Remove patch fix-err-of-wrong-return-type.patch (969310232) Remove patch compat_remove_pgprot_88dca4c.patch (ee025dc84) Remove patch compat_generic_make_request.patch (8615d6837) Remove patch blk_alloc_queue_make_request.patch (edaa9b0f/fb59b40e) Remove patch remove_congested_fn_congested_data.patch (34484003/9b80d46b) - Modify patch compat_remove_kernel_setsockopt.patch (518846b54) Modify patch compat_blk_queue_stack_limits.patch (edaa9b0f2) ==== kcm5-fcitx ==== Subpackages: kf5-kcm-fcitx kf5-kcm-fcitx-icons - fix-building-with-qt-5.12.patch does not work as it said, it should detect Qt version by itself - Add patch to build with Qt 5.12 which doesn't have QList::swapItemsAt. The patch is only applied if Qt < 5.13 is being used to build the package. * fix-building-with-qt-5.12.patch ==== libressl ==== Version update (3.2.2 -> 3.2.3) Subpackages: libcrypto46 libssl48 libtls20 - Update to release 3.2.3 * Fixed: Malformed ASN.1 in a certificate revocation list or a timestamp response token could lead to a NULL pointer dereference. ==== lightdm ==== Subpackages: liblightdm-gobject-1-0 lightdm-lang - Only build the qt4 subpackage up to Leap 15.2 / SLE 15 SP2 (boo#1179613) ==== mdevctl ==== Version update (0.61 -> 0.78) - Update to version 0.78: * Automatic version commit for tag 0.78 * use standard bash path * avoid other tags spilling into the .spec changelog * mdevctl: fix cleanup on error when creating and removing mdev * version support * Fix attributes getting applied via start-parent-mdevs * mdevctl: fix cleanup on error when writing to attribute * Remove never used 'available' option * Fix attribute validation jsc#SLE-15861, bsc#1179770 ==== openldap2 ==== Version update (2.4.55 -> 2.4.56) Subpackages: libldap-2_4-2 libldap-2_4-2-32bit libldap-data openldap2-client - updated to 2.4.56 OpenLDAP 2.4.56 Release (2020/11/10) Fixed slapd to remove assert in certificateListValidate (ITS#9383) Fixed slapd to remove assert in csnNormalize23 (ITS#9384) Fixed slapd to better parse ldapi listener URIs (ITS#9379) ==== perl-Mojolicious ==== Version update (8.66 -> 8.67) - updated to 8.67 see /usr/share/doc/packages/perl-Mojolicious/Changes 8.67 2020-12-04 - Deprecated Mojolicious::Routes::Route::route in favor of Mojolicious::Routes::Route::any. - Deprecated Mojolicious::Routes::Route::over in favor of Mojolicious::Routes::Route::requires. - Deprecated Mojolicious::Routes::Route::via in favor of Mojolicious::Routes::Route::methods. - Deprecated Mojolicious::Routes::Route::detour. - Added methods and requires methods to Mojolicious::Routes::Route. - Improved Mojolicious::Commands to throw an exception for invalid commands. ==== polkit-default-privs ==== Version update (1550+20201119.2c1dce4 -> 1550+20201208.135bf51) - Update to version 1550+20201208.135bf51: * libvirt: allow the active session to create read-only connections (bsc#1179126) * profiles: cleanup outdates keep_always entries ==== postgresql13 ==== Subpackages: libpq5 postgresql13-contrib postgresql13-docs postgresql13-llvmjit postgresql13-server - bsc#1178961: %ghost the symlinks to pg_config and ecpg. - boo#1179765: BuildRequire libpq5 and libecpg6 when not building them to avoid dangling symlinks in the devel package. ==== qemu ==== Version update (5.1.0 -> 5.2.0) Subpackages: qemu-arm qemu-block-curl qemu-block-dmg qemu-block-gluster qemu-block-iscsi qemu-block-nfs qemu-block-rbd qemu-block-ssh qemu-chardev-baum qemu-guest-agent qemu-hw-display-qxl qemu-hw-usb-redirect qemu-hw-usb-smartcard qemu-ipxe qemu-ksm qemu-kvm qemu-lang qemu-microvm qemu-ppc qemu-seabios qemu-sgabios qemu-skiboot qemu-tools qemu-ui-curses qemu-ui-gtk qemu-ui-spice-app qemu-vgabios qemu-vhost-user-gpu qemu-x86 - Update to v5.2.0: See http://wiki.qemu.org/ChangeLog/5.2 Take note that ongoing feature deprecation is tracked at both http://wiki.qemu-project.org/Features/LegacyRemoval and in the deprecated.html file installed with the qemu package Some noteworthy changes: * Dropped system emulators: qemu-system-lm32, qemu-system-unicore32 * Dropped linux user emulator: qemu-ppc64abi32 * Added linux user emulator: qemu-extensaeb * Unicore32 and lm32 guest support dropped * New sub-packages (most due to ongoing modularization of QEMU): qemu-audio-spice, qemu-hw-chardev-spice, qemu-hw-display-virtio-vga, qemu-hw-display-virtio-gpu, qemu-hw-display-virtio-gpu-pci, qemu-ui-spice-core, qemu-ui-opengl, qemu-ivshmem-tools * x86: A new KVM feature which improves the handling of asynchronous page faults is available with -cpu ...,kvm-async-pf-int (requires Linux 5.8) * s390: More instructions emulated under TCG * PowerPC: nvdimm= machine option now functions correctly; misc improvements * ARM: new boards: mps2-an386 (Cortex-M4 based) and mps2-an500 (Cortex-M7 based), raspi3ap (the Pi 3 model A+), raspi0 (the Pi Zero) and raspi1ap (the Pi A+) * RISC-V: OpenSBI v0.8 included by default; Generic OpenSBI platform used when no -bios argument is supplied; Support for NUMA sockets on Virt and Spike Machines; Support for migrating machines; misc improvements * Misc NVMe improvements * The 'vhost-user-blk' export type has been added, allowing qemu-storage-daemon to act as a vhost-user-blk device backend * The SMBIOS OEM strings can now come from a file * 9pfs - misc performance related improvements * virtiofs - misc improvements * migration: The default migration bandwidth has been increased to 1Gbps (users are still encouraged to tune it to their own hardware); The new 'calc-dirty-rate' and 'query-dirty-rate' QMP commands can help determine the likelihood of precopy migration success; TLS+multifd now supported for higher bandwidth encrypted migration; misc minor features added * Misc minor block features added * Misc doc improvements * qemu-microvm subpackage change: the bios-microvm.bin is now SeaBIOS based, and the qboot based on is now qboot.rom * elf2dmp is no longer part of qemu-tools (it was never intended to be a packaged binary) * Some subpackages which were 'Requires' are now 'Recommends', allowing for a smaller qemu packaging footprint if needed * Patches dropped (included in release tarball, unless otherwise noted): docs-fix-trace-docs-build-with-sphinx-3..patch (fixed differently) hw-hyperv-vmbus-Fix-32bit-compilation.patch linux-user-properly-test-for-infinite-ti.patch Switch-order-of-libraries-for-mpath-supp.patch (fixed differently) Conditionalize-ui-bitmap-installation-be.patch (fixed differently) hw-usb-hcd-xhci-Fix-GCC-9-build-warning.patch (no longer using gcc9) hw-usb-dev-mtp-Fix-GCC-9-build-warning.patch (no longer using gcc9) roms-Makefile-enable-cross-compile-for-b.patch (fixed with different patch) libvhost-user-handle-endianness-as-manda.patch virtio-add-vhost-user-fs-ccw-device.patch Fix-s-directive-argument-is-null-error.patch build-Workaround-compilation-error-with-.patch build-Be-explicit-about-fcommon-compiler.patch intel-Avoid-spurious-compiler-warning-on.patch golan-Add-explicit-type-casts-for-nodnic.patch Do-not-apply-WORKAROUND_CFLAGS-for-host-.patch ensure-headers-included-are-compatible-w.patch Enable-cross-compile-prefix-for-C-compil.patch (fixed differently) hw-net-net_tx_pkt-fix-assertion-failure-.patch hw-net-xgmac-Fix-buffer-overflow-in-xgma.patch s390x-protvirt-allow-to-IPL-secure-guest.patch usb-fix-setup_len-init-CVE-2020-14364.patch * Patches added: meson-install-ivshmem-client-and-ivshmem.patch Revert-roms-efirom-tests-uefi-test-tools.patch Makefile-Don-t-check-pc-bios-as-pre-requ.patch roms-Makefile-add-cross-file-to-qboot-me.patch qboot-add-cross.ini-file-to-handle-aarch.patch usb-Help-compiler-out-to-avoid-a-warning.patch - In spec file, where reasonable, switch BuildRequires: XXX-devel to be pkgconfig(XXX') instead - No longer disable link time optimization for qemu for x86. It looks like either the build service, qemu code changes and/or the switch to meson have resolved issues previously seen there. We still see problems for other architectures however. - For the record, the following issues reported for SUSE SLE15-SP2 are either fixed in this current package, or are otherwise no longer an issue: bsc#1172384 bsc#1174386 bsc#1174641 bsc#1174863 bsc#1175370 bsc#1175441 bsc#1176494 CVE-2020-13361 CVE-2020-14364 CVE-2020-15863 CVE-2020-16092 CVE-2020-24352 and the following feature requests are satisfied by this package: jsc#SLE-13689 jsc#SEL-13780 jsc#SLE-13840 - To be more accurate, and to align with other qemu packaging practices, rename the qemu-s390 package to qemu-s390x. The old name (in the rpm namespace) is provided with a "Provides" directive, and an "Obsoletes" done against that name for prior qemu versions, as is standard practice (boo#1177764 jsc#SLE-17060) - Take this opportunity to remove some ancient Split-Provides mechanisms which can't conceivably be needed any more: qemu-block-curl provided: qemu:%_libdir/%name/block-curl.so qemu-guest-agent provided: qemu:%_bindir/qemu-ga qemu-tools provided: qemu:%_libexecdir/qemu-bridge-helper - Disable linux-user 'ls' test on 32 bit arm. It's failing with "Allocating guest commpage: Cannot allocate memory" error, which we should hunt down, but for now we don't want it to prevent the package from being built ==== remmina ==== Version update (1.4.9 -> 1.4.10) Subpackages: remmina-lang remmina-plugin-rdp remmina-plugin-secret remmina-plugin-vnc remmina-plugin-xdmcp - Update to release 1.4.10 * Resolve "RDP Black Screen on connection" !2123 @antenore * Correctly importing and exporting audiocapturemode, closes #2349 !2124 @antenore * [RFC] rdp: add Use base credential for RD gateway authentication !2125 @Fantu * Resolve "Auto accept changes to fingerprints and auto accept certificates" !2126 @antenore * "Fingerprinters" corrected to "fingerprints". !2127 @kingu * Implementing network type option !2128 @antenore * Improving the terminal colour file picker !2129 @antenore * Resolve "[RDP] Since v1.4.9 Audio is no longer working" !2130 @antenore * New connection strings corrected !2131 @kingu * Correct location of Terminal colour scheme setting !2132 @kingu * Fixing pulseaudio LD_LIBRARY_PATH and staging PA libraries !2136 @antenore * [RFC][v2] RDP: Add Use base credential for RD gateway authentication !2135 @Fantu * fix incorrect name date log sessions ssh !2137 @acendrou * Resolve "Strange padding in main window" !2138 @antenore * Remove legacy rfx code !2139 @antenore * Resolve "RDP export features does not properly include gatewayhostname" !2140 @antenore * RDP log filters keep previous value across connections !2143 @antenore * [RFC][v2] RDP: Add Use base credential for RD gateway authentication !2135 @Fantu * Emit warning if libkf5wallet missing but required by -DWITH_KF5WALLET=ON !2144 @giox069 * Do not activate performance optimisations based on network type unless explicitly requested. !2145 @antenore ==== rubygem-autoprefixer-rails ==== Version update (10.0.1.3 -> 10.1.0.0) - updated to version 10.1.0.0 * Fixed `Cannot read property 'proxyOf' of undefined` error (by Igor Kamyshev). * Added `dpcm` unit support to `min-resolution: 2dppx` (by Robert Eisele). * Fixed rational approximation in `min-resolution` (by Robert Eisele). ==== rubygem-erubi ==== Version update (1.9.0 -> 1.10.0) - updated to version 1.10.0 * Improve template parsing, mostly by reducing allocations (jeremyevans) * Do not ship tests in the gem, reducing gem size about 20% (jeremyevans) * Support :literal_prefix and :literal_postfix options for how to output literal tags (e.g. <%% code %>) (jaredcwhite) (#26, #27) ==== rubygem-loofah ==== Version update (2.7.0 -> 2.8.0) - updated to version 2.8.0 * Allow CSS properties `order`, `flex-direction`, `flex-grow`, `flex-wrap`, `flex-shrink`, `flex-flow`, `flex-basis`, `flex`, `justify-content`, `align-self`, `align-items`, and `align-content`. [[#197](https://github.com/flavorjones/loofah/issues/197)] (Thanks, [@miguelperez](https://github.com/miguelperez)!) ==== rubygem-passenger ==== Version update (6.0.6 -> 6.0.7) Subpackages: ruby2.7-rubygem-passenger rubygem-passenger-apache2 - updated to version 6.0.7 * Addresses regression introduced in 6.0.5 when attempting to establish database connection after fork and activerecord is not configured in the expected way. Closes GH-2281. * Addresses regression introduced in 5.1.5 where hook scripts would fail to run. As a result the PASSENGER_ERROR_PAGE and PASSENGER_CONFIG_MANIFEST env vars have been removed from the passenger hook script environment. * Match static rails assets on 8-digit content hash. Contributed by @mattozinga. * Allow skipping the Apache/Nginx sections of the `passenger-memory-stats` output, through the `--no-apache` and `--no-nginx` commandline options. Closes GH-2306. Contributed by Saverio Miroddi (@saveriomiroddi). * Fixes an issue where `passenger-memory-stats` would throw an error if a process went away while it was running. Closes GH-2305. * Fixes a formatting issue with apr-1 include flags on macOS. * Fixes a warning about BOOST_*_ENDIAN macros being deprecated by migrating to new suggested macros. * Fixes an occasional issue with the node loader where the startup handshake would fail to record progress. * Adds an option for specifying the address to bind ruby apps to, for sending requests directly to specific app instances: - Standalone: direct_instance_request_address - Nginx: passenger_direct_instance_request_address - Apache: PassengerDirectInstanceRequestAddress * Updated various library versions used in precompiled binaries (used for e.g. gem installs): - ccache: 4.0 (was: 3.7.10) - curl: 7.73.0 (was: 7.71.1) - git: 2.29.1 (was: 2.27.0) - gnupg: 2.2.23 (was: 2.2.21) - libgpg_error: 1.39 (was: 1.38) - ruby: 2.7.2 (was: 2.7.1) - libassuan 2.5.4 (was: 2.5.3) - libgcrypt 1.8.7 (was 1.8.6) - OpenSSL 1.1.1h (was 1.0.2u) - added apache-rpm-macros and apache2-utils to gem2rpm.yml file (otherwise the dependencies are missing when generating the spec file again) - use system apache rpm macros - require apache2-utils for build (apachectl) ==== rubygem-puma ==== Version update (5.0.4 -> 5.1.1) [#]# 5.1.1 / 2020-12-10 * Bugfixes * Fix over eager matching against banned header names ([#2510]) [#]# 5.1.0 / 2020-11-30 * Features * Phased restart availability is now always logged, even if it is not available. * Prints the loaded configuration if the environment variable `PUMA_LOG_CONFIG` is present ([#2472]) * Integrate with systemd's watchdog and notification features ([#2438]) * Adds max_fast_inline as a configuration option for the Server object ([#2406]) * You can now fork workers from worker 0 using SIGURG w/o fork_worker enabled [#2449] * Add option to bind to systemd activated sockets ([#2362]) * Add compile option to change the `QUERY_STRING` max length ([#2485]) * Bugfixes * Fix JRuby handling in Puma::DSL#ssl_bind ([#2489]) * control_cli.rb - all normal output should be to @stdout ([#2487]) * Catch 'Error in reactor loop escaped: mode not supported for this object: r' ([#2477]) * Ignore Rails' reaper thread (and any thread marked forksafe) for warning ([#2475]) * Ignore illegal (by Rack spec) response header ([#2439]) * Close idle connections immediately on shutdown ([#2460]) * Fix some instances of phased restart errors related to the `json` gem ([#2473]) * Remove use of `json` gem to fix phased restart errors ([#2479]) * Fix grouping regexp of ILLEGAL_HEADER_KEY_REGEX ([#2495])- ==== rubygem-tzinfo ==== Version update (2.0.2 -> 2.0.3) - updated to version 2.0.3 * Added support for handling "slim" format zoneinfo files that are produced by default by zic version 2020b and later. The POSIX-style TZ string is now used calculate DST transition times after the final defined transition in the file. [#120]. * Fixed `TimeWithOffset#getlocal` returning a `TimeWithOffset` with the `timezone_offset` still assigned when called with an offset argument on JRuby 9.3. * Rubinius is no longer supported. ==== rubygem-zeitwerk ==== Version update (2.4.1 -> 2.4.2) - updated to version 2.4.2 * Implements `Zeitwerk::Loader#on_load`, which allows you to configure blocks of code to be executed after a certain class or module have been loaded: ```ruby [#] config/environments/development.rb loader.on_load("SomeApiClient") do SomeApiClient.endpoint = "https://api.dev" [#] config/environments/production.rb loader.on_load("SomeApiClient") do SomeApiClient.endpoint = "https://api.prod" end ``` See the [documentation](https://github.com/fxn/zeitwerk/blob/master/README.md#the-on… for further details. ==== scim ==== Subpackages: scim-gtk scim-gtk-32bit scim-gtk3 scim-lang - Do not build the qt4 subpackage for Leap 15.3 or newer (boo#1179613). ==== supermin ==== Version update (5.1.20 -> 5.2.0) - update to 5.2.0: * rpm: extend the Multiple_matches exception * Use external command mv to rename old output directory (RHBZ#1670191). * rpm: do not unpack parameters * rpm: fix version comparison * rpm: provide a dummy supermin_rpm_get_arch implementation * ext2: Build symbolic links correctly (RHBZ#1770304). * Update gnulib to latest. - switch to release tarball, use keyring for gpg validation - run tests ==== virtualbox ==== Version update (6.1.14 -> 6.1.16) Subpackages: virtualbox-guest-tools virtualbox-guest-x11 - Add vb-6.1.16-modal-dialog-parent.patch in order to solve the file selector dialog mouse control issues - Fix build with RPM 4.16: Do not install files to buildroot during the build phase: - Do not forcibly require systemd: systemd_ordering is sufficient. - Add linux-5.10-r0drv-memobj-fix-r0.patch to fix build with kernel 5.10 - Add linux-5.10-address-space-fixes.patch to fix sharedfolders with 5.10 - Add linux-5.10-framebuffer-fixes.patch to fix framebuffer with 5.10 - Version bump to 6.1.16 (released October 16 2020 by Oracle) This is a maintenance release. The following items were fixed and/or added: File "fixes_for_5.9.patch" deleted - fixed upstream. VMM: Fixed random memory corruption and XMM register state corruption inside the VM when Hyper-V is used (bug #19695) VMM: Fixed VMSVGA 3D support with Linux guests when Hyper-V is used (bug #19884) GUI: Fixed some Qt related crashes on macOS Big Sur Oracle Cloud Infrastructure integration: Fixed network integration not working behind some proxies USB: Mask out remote wake capability to avoid unresponsive devices Audio: Fixed issues with audio playback after host goes to sleep (bug #18594) Serial: Keep transferring data if the status line monitoring fails Serial: Fixed blocking a re-connect when TCP mode is used (bug #19878) HPET: Fixed inability of guests to use the last timer VBoxManage: Fixed detection of system locale when running 'VBoxManage unattended install' without --locale (bug #19856) Linux host and guest: Support kernel version 5.9 (bug #19845) Linux guest: Workaround to improve resizing of 32-bit VMs with VMSVGA graphics controller, and do not try to use RandR version 1.3 due to bugs causing the X server to hang Linux guest: Fixed VBoxService crashing in the CPU hot-plug service under certain circumstances during a CPU hot-unplug event (bugs #19902 and #19903) Linux guest: Fixed Guest additions build for RHEL 8.3 beta (bug #19863) ==== virtualbox-kmp ==== Version update (6.1.14_k5.9.12_1 -> 6.1.16_k5.9.12_1) - Add vb-6.1.16-modal-dialog-parent.patch in order to solve the file selector dialog mouse control issues - Fix build with RPM 4.16: Do not install files to buildroot during the build phase: - Do not forcibly require systemd: systemd_ordering is sufficient. - Add linux-5.10-r0drv-memobj-fix-r0.patch to fix build with kernel 5.10 - Add linux-5.10-address-space-fixes.patch to fix sharedfolders with 5.10 - Add linux-5.10-framebuffer-fixes.patch to fix framebuffer with 5.10 - Version bump to 6.1.16 (released October 16 2020 by Oracle) This is a maintenance release. The following items were fixed and/or added: File "fixes_for_5.9.patch" deleted - fixed upstream. VMM: Fixed random memory corruption and XMM register state corruption inside the VM when Hyper-V is used (bug #19695) VMM: Fixed VMSVGA 3D support with Linux guests when Hyper-V is used (bug #19884) GUI: Fixed some Qt related crashes on macOS Big Sur Oracle Cloud Infrastructure integration: Fixed network integration not working behind some proxies USB: Mask out remote wake capability to avoid unresponsive devices Audio: Fixed issues with audio playback after host goes to sleep (bug #18594) Serial: Keep transferring data if the status line monitoring fails Serial: Fixed blocking a re-connect when TCP mode is used (bug #19878) HPET: Fixed inability of guests to use the last timer VBoxManage: Fixed detection of system locale when running 'VBoxManage unattended install' without --locale (bug #19856) Linux host and guest: Support kernel version 5.9 (bug #19845) Linux guest: Workaround to improve resizing of 32-bit VMs with VMSVGA graphics controller, and do not try to use RandR version 1.3 due to bugs causing the X server to hang Linux guest: Fixed VBoxService crashing in the CPU hot-plug service under certain circumstances during a CPU hot-unplug event (bugs #19902 and #19903) Linux guest: Fixed Guest additions build for RHEL 8.3 beta (bug #19863) ==== xdm ==== Subpackages: xdm-xsession - fixed %postun for older releases than factory/TW (see change right below, which broke it) ==== yast2-network ==== Version update (4.3.30 -> 4.3.31) - Clean the ifcfg file cached data before the connection configuration changes are written (bsc#1178950) - 4.3.31

1 0

fetchmsttfonts 11.4-45.2 -> 11.4-46.1
by Patrick Shanahan 12 Dec '20

12 Dec '20

something not kosher here: https://download.opensuse.org/repositories/graphics/openSUSE_Tumbleweed/ (1/2) Installing: fetchmsttfonts-11.4-46.1.noarch .............................................................................................[done] (2/2) Installing: rawtherapee-unstable-5.8~git.20201102.2549.g7fd570706-826.12.x86_64 .........................................................[done] Executing %posttrans scripts ..................................................................................................................[done] Running: fetchmsttfonts-11.4-46.1-fetchmsttfonts.sh.txt (fetchmsttfonts, /var/adm/update-scripts) EULA: Fetching ... done andale32.exe (https://sourceforge.net/projects/corefonts/files/the%20fonts/final/andale32…) Fetching ... failed ... deleted! arial32.exe (https://sourceforge.net/projects/corefonts/files/the%20fonts/final/arial32.…) Fetching ... failed ... deleted! ... tks, -- (paka)Patrick Shanahan Plainfield, Indiana, USA @ptilopteri http://en.opensuse.org openSUSE Community Member facebook/ptilopteri Photos: http://wahoo.no-ip.org/piwigo paka @ IRCnet freenode

5 14

Managing list offtopicness better.
by Simon Lees 12 Dec '20

12 Dec '20

Hi All, The board has noticed an again increasing amount of offtopic discussion on both the Project and Factory mailing lists, including some users having longer then needed conversations drawn out over a significant number of emails per thread. Our new mailing list setup has given us some more options with regards to this. In particular the board has decided that users who regularly take the list off topic from now will be placed under moderation for a period of time. To help facilitate this the board has asked the mailing list admin's to create a mailing list moderation team with enough people to reasonably cover all timezones, once this team is created it should be able to become self sustaining like the forum moderators for example. If you are passionate about this and believe you would be a good candidate feel free to contact the mailing list admins at admin(a)o.o as I believe they are looking for a couple more candidates especially in European timezones. As a reminder the project mailing list is for non technical project wide / community wide discussions. The factory list is strictly for development discussions, with a reminder that we have the support list and forums for user support, the user list for general discussion and an offtopic list for everything else. There are also many other lists for specific topics and languages you can find a link to them all below, the link below that covers all the other places you can interact with the community https://lists.opensuse.org/archives/ https://en.opensuse.org/openSUSE:Communication_channels -- Simon Lees (Simotek) http://simotek.net Emergency Update Team keybase.io/simotek SUSE Linux Adelaide Australia, UTC+10:30 GPG Fingerprint: 5B87 DB9D 88DC F606 E489 CEC5 0922 C246 02F0 014B

1 0

Announcement:New openQA features available: Custom hook scripts on "job done" + the auto-review workflow
by Oliver Kurz 11 Dec '20

11 Dec '20

To all users of openQA, good news everyone! openQA has gained a new feature called "Custom hook scripts on 'job done' based on result". With this every openQA instance can be configured to run custom scripts or applications whenever a openQA job finishes. Based on the result of the job different scripts can be called, for example for a "failed" or "incomplete" or "passed" job. Next to the already existing AMQP events (http://open.qa/docs/#_configuring_amqp_message_emission) in openQA this could be used to send notifications, trigger other steps of a bigger CI pipeline or run additional analysis steps on test results. Our common openSUSE instance openqa.opensuse.org is using this feature already and triggers the so called "auto-review"-workflow, see https://github.com/os-autoinst/scripts/#auto-review---automatically-detect-… for details. With this incomplete and failed jobs are automatically labeled with ticket links for "known issues" based on simple regex strings specified in tickets on progress.opensuse.org, our main issue tracker for test issues. Also, where specified accordingly in these tickets, jobs are automatically retriggered. With this we envision that the review of openQA test results can become much easier. Of course we are never tired to improve the workflows even further, work on new ideas and improve the overall quality even more. If you want to know more about openQA in general visit http://open.qa/ Have fun, Oliver for the SUSE QE Tools team

3 2

New Tumbleweed snapshot 20201209 released!
by Dominique Leuenberger 10 Dec '20

10 Dec '20

Please note that this mail was generated by a script. The described changes are computed based on the x86_64 DVD. The full online repo contains too many changes to be listed here. Please check the known defects of this snapshot before upgrading: https://openqa.opensuse.org/tests/overview?distri=opensuse&groupid=1&versio… Please do not reply to this email to report issues, rather file a bug on bugzilla.opensuse.org. For more information on filing bugs please see https://en.opensuse.org/openSUSE:Submitting_bug_reports Packages changed: Mesa (20.2.3 -> 20.2.4) Mesa-drivers (20.2.3 -> 20.2.4) ModemManager (1.14.6 -> 1.14.8) NetworkManager (1.26.4 -> 1.28.0) apache2 apache2-prefork apache2-utils bind (9.16.7 -> 9.16.8) busybox cryptsetup firewalld (0.9.0 -> 0.9.1) fprintd (1.90.4 -> 1.90.6) gdb gdk-pixbuf (2.42.0 -> 2.42.2) gnome-chess (3.38.0 -> 3.38.1) gpgme gpgmeqt gtk3 (3.24.23+118 -> 3.24.24) hplip (3.20.6 -> 3.20.9) hwdata (0.341 -> 0.342) libical libical-glib libqb (2.0.1+20200729.416caf2 -> 2.0.2+20201203.def947e) libstorage-ng (4.3.71 -> 4.3.72) libvirt lvm2 lvm2-device-mapper memcached (1.6.7 -> 1.6.9) mutt (2.0.2 -> 2.0.3) net-snmp netcat-openbsd nodejs14 opensc (0.19.0 -> 0.21.0) php7 plymouth (0.9.5+git20200921+20778f2 -> 0.9.5+git20201026+53c83cc) poppler (20.10.0 -> 20.12.0) poppler-qt5 (20.10.0 -> 20.12.0) procps psmisc python-dkimpy (1.0.3 -> 1.0.5) rubygem-net-ssh (6.1.0 -> 6.2.0.rc1) smp_utils subversion sudo (1.9.3p1 -> 1.9.4) sysconfig sysvinit (2.97 -> 2.98) telepathy-glib telepathy-logger tigervnc vim (8.2.2039 -> 8.2.2105) vlan webkit2gtk3 xfsdump xorg-x11-server (1.20.9 -> 1.20.10) yast2-firstboot (4.3.8 -> 4.3.9) yast2-installation (4.3.22 -> 4.3.24) yast2-trans (84.87.20201130.b140fdb5f7 -> 84.87.20201205.6b65f14502) === Details === ==== Mesa ==== Version update (20.2.3 -> 20.2.4) Subpackages: Mesa-dri-devel Mesa-libEGL1 Mesa-libGL1 Mesa-libglapi0 libgbm1 - update to 20.2.4 * fourth (second to last) bugfix release for the 20.2 branch ==== Mesa-drivers ==== Version update (20.2.3 -> 20.2.4) Subpackages: Mesa-dri Mesa-dri-nouveau Mesa-gallium Mesa-libva libvdpau_nouveau libvdpau_r300 libvdpau_r600 libvdpau_radeonsi libvulkan_intel libvulkan_radeon libxatracker2 - update to 20.2.4 * fourth (second to last) bugfix release for the 20.2 branch ==== ModemManager ==== Version update (1.14.6 -> 1.14.8) Subpackages: ModemManager-bash-completion ModemManager-lang libmm-glib0 - Update to version 1.14.8: + Build: - Fixed distcheck with new gtk-doc releases. - ModemManager-names.h was being included in the dist tarball, but then removed on the 'clean' target. Fix that, by only removing it on the 'maintainer-clean' target. Therefore, 'xsltproc' is now only needed in git builds, not needed when building from a dist tarball. + QMI: - Fix daemon crash when the device is removed during the initialization sequence. + Several other minor improvements and fixes. - Drop libxslt-tools BuildRequires: No longer needed. ==== NetworkManager ==== Version update (1.26.4 -> 1.28.0) Subpackages: NetworkManager-lang libnm0 typelib-1_0-NM-1_0 - Update to version 1.28.0: + Change the behavior of nm-initrd-generator so that the 'ip=off|none' kernel cmdline argument actually generates a connection which disables both ipv4 and ipv6. Previously the generated connection would disable ipv4 but ipv6 would be set to the 'auto' method. ==== apache2 ==== - Require /usr/bin/which instead of which: allow usage of busybox variant for containers. - apache2 main package recommends apache2-utils - break some long lines in the spec as requested by review team - maybe make spec acceptable for factory bot - modified sources % _multibuild - buildrequire netcfg for tests - remove Requires(post): firewalld hard dependency (this is already handled by the %firewalld_reload macro) - package reworked trough [bsc#1178478] - modified patches % apache2-mod_proxy_uwsgi-fix-crash.patch (refreshed) - modified sources % apache2-loadmodule.conf % apache2-manual.conf % apache2-script-helpers % apache2@.service % sysconfig.apache2 - deleted patches - deprecated-scripts-arch.patch (not needed) - httpd-2.0.54-envvars.dif (not needed) - httpd-2.1.3alpha-layout.dif (renamed to apache2-system-dirs-layout.patch) - httpd-2.2.0-apxs-a2enmod.dif (not needed) - httpd-2.4.9-bnc690734.patch (renamed to apache2-LimitRequestFieldSize-limits-headers.patch) - httpd-2.4.x-fate317766-config-control-two-protocol-options.diff (renamed to apache2-HttpContentLengthHeadZero-HttpExpectStrict.patch) - httpd-2.x.x-logresolve.patch (renamed to apache2-logresolve-tmp-security.patch) - httpd-apachectl.patch (renamed to apache2-apachectl.patch) - httpd-implicit-pointer-decl.patch (not needed) - httpd-visibility.patch (not needed) - deleted sources - SUSE-NOTICE (outdated) - a2enflag (renamed to apache2-a2enflag) - a2enmod (renamed to apache2-a2enmod) - apache-22-24-upgrade (outdated) - apache2-README (outdated) - apache2-README.QUICKSTART (outedated) - apache2-find-directives (renamed to apache2-find_directives) - apache2-init.logrotate (not needed) - apache2.firewalld (renamed to firewalld.apache2) - apache2.logrotate (renamed to logrotate.apache2) - apache2.ssl.firewalld (renamed to firewalld-ssl.apache2) - apache2.ssl.susefirewall (renamed to susefirewall.apache2) - apache2.susefirewall (renamed to susefirewall-ssl.apache2) - favicon.ico (not needed) - rc.apache2 (not needed) - robots.txt (not needed) - sysconf_addword (not needed, in aaa_base) - added patches fix PATCH: https://marc.info/?l=apache-httpd-users&m=147448312531134&w=2 + apache-test-application-xml-type.patch fix these variables from the test + apache-test-turn-off-variables-in-ssl-var-lookup.patch fix [fate317766] backport of an upstream commit + apache2-HttpContentLengthHeadZero-HttpExpectStrict.patch fix [bnc#690734] TODO, to be upstreamed + apache2-LimitRequestFieldSize-limits-headers.patch fix apachectl is frontend for start_apache2, suse specific + apache2-apachectl.patch fix [bnc#210904] perhaps to be upstreamed + apache2-logresolve-tmp-security.patch fix layout of system dirs configuration, may be upstreamed + apache2-system-dirs-layout.patch - added sources + _multibuild + apache2-a2enflag + apache2-a2enmod + apache2-find_directives + apache2-gensslcert + apache2-mod_example.c + apache2-start_apache2 + firewalld-ssl.apache2 + firewalld.apache2 + logrotate.apache2 + susefirewall-ssl.apache2 + susefirewall.apache2 ==== apache2-prefork ==== - Require /usr/bin/which instead of which: allow usage of busybox variant for containers. - apache2 main package recommends apache2-utils - break some long lines in the spec as requested by review team - maybe make spec acceptable for factory bot - modified sources % _multibuild - buildrequire netcfg for tests - remove Requires(post): firewalld hard dependency (this is already handled by the %firewalld_reload macro) - package reworked trough [bsc#1178478] - modified patches % apache2-mod_proxy_uwsgi-fix-crash.patch (refreshed) - modified sources % apache2-loadmodule.conf % apache2-manual.conf % apache2-script-helpers % apache2@.service % sysconfig.apache2 - deleted patches - deprecated-scripts-arch.patch (not needed) - httpd-2.0.54-envvars.dif (not needed) - httpd-2.1.3alpha-layout.dif (renamed to apache2-system-dirs-layout.patch) - httpd-2.2.0-apxs-a2enmod.dif (not needed) - httpd-2.4.9-bnc690734.patch (renamed to apache2-LimitRequestFieldSize-limits-headers.patch) - httpd-2.4.x-fate317766-config-control-two-protocol-options.diff (renamed to apache2-HttpContentLengthHeadZero-HttpExpectStrict.patch) - httpd-2.x.x-logresolve.patch (renamed to apache2-logresolve-tmp-security.patch) - httpd-apachectl.patch (renamed to apache2-apachectl.patch) - httpd-implicit-pointer-decl.patch (not needed) - httpd-visibility.patch (not needed) - deleted sources - SUSE-NOTICE (outdated) - a2enflag (renamed to apache2-a2enflag) - a2enmod (renamed to apache2-a2enmod) - apache-22-24-upgrade (outdated) - apache2-README (outdated) - apache2-README.QUICKSTART (outedated) - apache2-find-directives (renamed to apache2-find_directives) - apache2-init.logrotate (not needed) - apache2.firewalld (renamed to firewalld.apache2) - apache2.logrotate (renamed to logrotate.apache2) - apache2.ssl.firewalld (renamed to firewalld-ssl.apache2) - apache2.ssl.susefirewall (renamed to susefirewall.apache2) - apache2.susefirewall (renamed to susefirewall-ssl.apache2) - favicon.ico (not needed) - rc.apache2 (not needed) - robots.txt (not needed) - sysconf_addword (not needed, in aaa_base) - added patches fix PATCH: https://marc.info/?l=apache-httpd-users&m=147448312531134&w=2 + apache-test-application-xml-type.patch fix these variables from the test + apache-test-turn-off-variables-in-ssl-var-lookup.patch fix [fate317766] backport of an upstream commit + apache2-HttpContentLengthHeadZero-HttpExpectStrict.patch fix [bnc#690734] TODO, to be upstreamed + apache2-LimitRequestFieldSize-limits-headers.patch fix apachectl is frontend for start_apache2, suse specific + apache2-apachectl.patch fix [bnc#210904] perhaps to be upstreamed + apache2-logresolve-tmp-security.patch fix layout of system dirs configuration, may be upstreamed + apache2-system-dirs-layout.patch - added sources + _multibuild + apache2-a2enflag + apache2-a2enmod + apache2-find_directives + apache2-gensslcert + apache2-mod_example.c + apache2-start_apache2 + firewalld-ssl.apache2 + firewalld.apache2 + logrotate.apache2 + susefirewall-ssl.apache2 + susefirewall.apache2 ==== apache2-utils ==== - Require /usr/bin/which instead of which: allow usage of busybox variant for containers. - apache2 main package recommends apache2-utils - break some long lines in the spec as requested by review team - maybe make spec acceptable for factory bot - modified sources % _multibuild - buildrequire netcfg for tests - remove Requires(post): firewalld hard dependency (this is already handled by the %firewalld_reload macro) - package reworked trough [bsc#1178478] - modified patches % apache2-mod_proxy_uwsgi-fix-crash.patch (refreshed) - modified sources % apache2-loadmodule.conf % apache2-manual.conf % apache2-script-helpers % apache2@.service % sysconfig.apache2 - deleted patches - deprecated-scripts-arch.patch (not needed) - httpd-2.0.54-envvars.dif (not needed) - httpd-2.1.3alpha-layout.dif (renamed to apache2-system-dirs-layout.patch) - httpd-2.2.0-apxs-a2enmod.dif (not needed) - httpd-2.4.9-bnc690734.patch (renamed to apache2-LimitRequestFieldSize-limits-headers.patch) - httpd-2.4.x-fate317766-config-control-two-protocol-options.diff (renamed to apache2-HttpContentLengthHeadZero-HttpExpectStrict.patch) - httpd-2.x.x-logresolve.patch (renamed to apache2-logresolve-tmp-security.patch) - httpd-apachectl.patch (renamed to apache2-apachectl.patch) - httpd-implicit-pointer-decl.patch (not needed) - httpd-visibility.patch (not needed) - deleted sources - SUSE-NOTICE (outdated) - a2enflag (renamed to apache2-a2enflag) - a2enmod (renamed to apache2-a2enmod) - apache-22-24-upgrade (outdated) - apache2-README (outdated) - apache2-README.QUICKSTART (outedated) - apache2-find-directives (renamed to apache2-find_directives) - apache2-init.logrotate (not needed) - apache2.firewalld (renamed to firewalld.apache2) - apache2.logrotate (renamed to logrotate.apache2) - apache2.ssl.firewalld (renamed to firewalld-ssl.apache2) - apache2.ssl.susefirewall (renamed to susefirewall.apache2) - apache2.susefirewall (renamed to susefirewall-ssl.apache2) - favicon.ico (not needed) - rc.apache2 (not needed) - robots.txt (not needed) - sysconf_addword (not needed, in aaa_base) - added patches fix PATCH: https://marc.info/?l=apache-httpd-users&m=147448312531134&w=2 + apache-test-application-xml-type.patch fix these variables from the test + apache-test-turn-off-variables-in-ssl-var-lookup.patch fix [fate317766] backport of an upstream commit + apache2-HttpContentLengthHeadZero-HttpExpectStrict.patch fix [bnc#690734] TODO, to be upstreamed + apache2-LimitRequestFieldSize-limits-headers.patch fix apachectl is frontend for start_apache2, suse specific + apache2-apachectl.patch fix [bnc#210904] perhaps to be upstreamed + apache2-logresolve-tmp-security.patch fix layout of system dirs configuration, may be upstreamed + apache2-system-dirs-layout.patch - added sources + _multibuild + apache2-a2enflag + apache2-a2enmod + apache2-find_directives + apache2-gensslcert + apache2-mod_example.c + apache2-start_apache2 + firewalld-ssl.apache2 + firewalld.apache2 + logrotate.apache2 + susefirewall-ssl.apache2 + susefirewall.apache2 ==== bind ==== Version update (9.16.7 -> 9.16.8) Subpackages: bind-chrootenv bind-doc bind-utils libbind9-1600 libirs1601 libisccc1600 libisccfg1601 python3-bind - Added special make instruction for the "Administrator Reference Manual" which is built using python3-Sphinx [bsc#1177983, bind.spec] - Removed "Before=nss-lookup.target" from named.service as that leads to a systemd ordering cycle [bsc#1177491, bsc#1178626, bsc#1177991, vendor-files.tar.bz2] - Upgrade to version 9.16.8 New Features: * Add a new rndc command, "rndc dnssec -rollover", which triggers a manual rollover for a specific key. * Add a new rndc command, "rndc dumpdb -expired", which dumps the cache database, including expired RRsets that are awaiting cleanup, to the dump-file for diagnostic purposes. Bug Fixes: * named reported an invalid memory size when running in an environment that did not properly report the number of available memory pages and/or the size of each memory page. * With multiple forwarders configured, named could fail the REQUIRE(msg->state == (-1)) assertion in lib/dns/message.c, causing it to crash. This has been fixed. * named erroneously performed continuous key rollovers for KASP policies that used algorithm Ed25519 or Ed448 due to a mismatch between created key size and expected key size. * Updating contents of an RPZ zone which contained names spelled using varying letter case could cause some processing rules in that RPZ zone to be erroneously ignored. Local changes: * Add /usr/lib64/named to the files and directories in bind-chrootenv.conf. This directory contains plugins loaded after the chroot(). [bsc#1177913,bsc#1178078,bsc#1177603,bind-chrootenv.conf] - Removed "dnssec-enable" from named.conf as it has been obsoleted. Added a comment for reference which should be removed in the future. - Added a comment to the "dnssec-validation" in named.conf with a reference to forwarders which do not return signed responses. - Replaced named's dependency on time-sync with a dependency on time-set in named.service. [bsc#1177790,bsc#1175894,bsc#1177915,vendor-files.tar.bz2] ==== busybox ==== Subpackages: busybox-static - cpio-long-opt.patch: add more long options to cpio for IBS/unrpm ==== cryptsetup ==== Subpackages: cryptsetup-lang libcryptsetup12 libcryptsetup12-32bit libcryptsetup12-hmac - SLE marker: implements jsc#SLE-5911, bsc#1165580, jsc#SLE-145149 ==== firewalld ==== Version update (0.9.0 -> 0.9.1) Subpackages: firewalld-lang python3-firewall - Remove the patch which enforces usage of iptables instead of nftables: * 0001-firewall-backend-Switch-default-backend-to-iptables.patch - Add firewalld zone for the docker0 interface. This is the workaround for lack of nftables support in docker. Without that additional zone, containers have no Internet connectivity. (rhbz#1817022) - Update to 0.9.1: * Bugfixes: * docs(firewall-cmd): clarify lockdown whitelist command paths * fix(dbus): getActivePolicies shouldn't return a policy if a zone is not active * fix(policy): zone interface/source changes should affect all using zone ==== fprintd ==== Version update (1.90.4 -> 1.90.6) Subpackages: fprintd-lang fprintd-pam fprintd-pam-32bit - Update to version 1.90.5 The 1.90.5 release was unusable due to a number of inter-related issues with the DBus interface and authorization. We also found a number of problems with possible security implications. Currently fprintd will do interactive authorization even if this was not requested using the correct DBus method call flag. All API users MUST be updated to set the flag as it will be enabled in the future! Highlights: * Fix fprintd DBus configuration * Change details of what requires authorization * Fix various race conditions in pam_fprintd * Permit interactive authorization from fprintd utilities * Do not allow deletion while another operation is ongoing - Drop patch: * 0001-tests-Fix-test-not-failing-on-error.patch - Update to version 1.90.4 The 1.90.4 release caused a major regression, as it included a USB hub in UDEV the autosupend rule list. Highlights: * Remove USB hub from udev autosupend rules * synaptics: Add PID 0x00c9 which is used in some HP laptops ==== gdb ==== - Backport from master [jsc#13656]: * gdb-powerpc-remove-512-bytes-region-limit-if-2nd-dawr-is-avaliable.patch - Require 8GB diskspace for x86_64. ==== gdk-pixbuf ==== Version update (2.42.0 -> 2.42.2) Subpackages: gdk-pixbuf-lang gdk-pixbuf-query-loaders gdk-pixbuf-query-loaders-32bit gdk-pixbuf-thumbnailer libgdk_pixbuf-2_0-0 libgdk_pixbuf-2_0-0-32bit typelib-1_0-GdkPixbuf-2_0 - Update to version 2.42.2: + Requre Meson 0.55.3. + Improve the PNG save operation. + Fix leak in the error path of the XPM loader. + Fix loading GIF without a GCE rendering color 0. + Fix invalid LZW codes in the GIF loader (CVE-2020-29385). ==== gnome-chess ==== Version update (3.38.0 -> 3.38.1) Subpackages: gnome-chess-lang - Update to version 3.38.1: + Try to make all chess engines easier on Easy and Normal difficulty. + Fix claim draw dialog appearing every turn after threefold repetition. + Fix bogus "computer player is confused" errors in several situations: - When the engine is stalemated. - When starting a new game while the game is paused, if the engine has moved during pause. - When resigning immediately before the engine moves. + Fix file chooser defaulting to /run when game is saved for a second time under flatpak. + Fix detection of stalled chess engine in untimed games. + Fix claim draw dialog appearing before a forced draw. + Fix ChessScene removing invalid GSource. ==== gpgme ==== Subpackages: libgpgme11 libgpgmepp6 python3-gpg - Use python-rpm-macros to provide python3X-gpg for all present python3 flavors -- gh#openSUSE/python-rpm-macros#66 ==== gpgmeqt ==== - Use python-rpm-macros to provide python3X-gpg for all present python3 flavors -- gh#openSUSE/python-rpm-macros#66 ==== gtk3 ==== Version update (3.24.23+118 -> 3.24.24) Subpackages: gtk3-data gtk3-immodule-amharic gtk3-immodule-inuktitut gtk3-immodule-thai gtk3-immodule-tigrigna gtk3-immodule-vietnamese gtk3-immodule-xim gtk3-lang gtk3-schema gtk3-tools libgtk-3-0 typelib-1_0-Gtk-3_0 - Update to version 3.24.24: + GtkColorChooser: Update the default color palette. + GtkFontChooser: Fix family-only mode to return regular style. + GtkTreeView: Don't set focus-on-click for header buttons. + Accessibility: - Implement scrollSubstringTo. - Add a11y support to GtkPlug/GtkSocket. + Printing: Allow the lpr backend to print pdf and ps files. + Theme: - Update gesture graphics. - Update HighContrast css. + Wayland: Support the primary-selection-unstable-v1 protocol. + X11: Fix a crash with parent-relative backgrounds. + Broadway: Set modifier state of scroll events. + Build: Fix pc file generation on NixOS. + Updated translations. ==== hplip ==== Version update (3.20.6 -> 3.20.9) Subpackages: hplip-hpijs hplip-sane - Update to 3.20.9 Add support for the following printers: * HP Color LaserJet Managed MFP E57540dn * HP Color LaserJet Managed Flow MFP E57540c * HP Color LaserJet Enterprise MFP M578dn * HP Color LaserJet Enterprise MFP M578f * HP Color LaserJet Enterprise Flow MFP M578c * HP Color LaserJet Enterprise Flow MFP M578z * HP Color LaserJet Managed E55040dw * HP Color LaserJet Managed E55040dn * HP Color LaserJet Enterprise M554dn * HP Color LaserJet Enterprise M555dn * HP Color LaserJet Enterprise M555x - Modified patches: * Use-lsb_release-fallback-code-if-import-distro-fails.patch * hp_ipp.h-add-missing-prototypes.patch * hplip-remove-imageprocessor.diff * hplip-udev-rules-in-usr.patch + refresh using source service * add_missing_includes_and_define_GNU_SOURCE.patch + refresh, drop inexisting file and add GNU_SOURCE definition and missing include in common/utils.c * hplip-misc-missing-includes-and-definitions.patch + rediff to changed context - New build dependency on libavahi-devel ==== hwdata ==== Version update (0.341 -> 0.342) - Update to version 0.342: + Updated pci, usb and vendor ids. ==== libical ==== - Add 0001-Fix-build-with-icu-68.1.patch: fix build with icu 68.1. ==== libical-glib ==== - Add 0001-Fix-build-with-icu-68.1.patch: fix build with icu 68.1. ==== libqb ==== Version update (2.0.1+20200729.416caf2 -> 2.0.2+20201203.def947e) - Update to version 2.0.2+20201203.def947e (v2.0.2): - ipcs : Decrease log level. (#426) - cov: Quieten some covscan warnings (#427) - doxygen2man: Fix a couple of covscan-detected errors (#425) - ipcs: Add missing qb_list_del when freeing server (#423) (gh#ClusterLabs/libqb#422) - ipc: add qb_ipcc_auth_get() API call (#418) - doxygen2man: Remove horrible hack (#420) (gh#ClusterLabs/libqb#419) - doxygen2man: Add support for @code blocks (#417) - man: Tidy man pages (#416) - doxygen2man: Add option to read copyright line from the header file (#415) (gh#ClusterLabs/libqb#414) ==== libstorage-ng ==== Version update (4.3.71 -> 4.3.72) Subpackages: libstorage-ng-lang libstorage-ng-ruby libstorage-ng1 - merge gh#openSUSE/libstorage-ng#785 - handle missing partition device nodes for multipath (bsc#1175981) - 4.3.72 ==== libvirt ==== Subpackages: libvirt-bash-completion libvirt-client libvirt-daemon libvirt-daemon-driver-interface libvirt-daemon-driver-libxl libvirt-daemon-driver-lxc libvirt-daemon-driver-network libvirt-daemon-driver-nodedev libvirt-daemon-driver-nwfilter libvirt-daemon-driver-qemu libvirt-daemon-driver-secret libvirt-daemon-driver-storage libvirt-daemon-driver-storage-core libvirt-daemon-driver-storage-disk libvirt-daemon-driver-storage-iscsi libvirt-daemon-driver-storage-iscsi-direct libvirt-daemon-driver-storage-logical libvirt-daemon-driver-storage-mpath libvirt-daemon-driver-storage-rbd libvirt-daemon-driver-storage-scsi libvirt-daemon-lxc libvirt-daemon-qemu libvirt-daemon-xen libvirt-libs - spec: Enable mdevctl support in the nodedev driver for SLE15 SP3 jsc#SLE-15861, bsc#1179770 - apparmor: Allow lxc processes to receive signals from libvirt lxc: Set default security model in XML parser config 0d05d51b-apparmor-lxc-fix.patch, cf4e7e62-lxc-def-secmodel.patch bsc#1179735 ==== lvm2 ==== Subpackages: liblvm2cmd2_03 - prepare usrmerge (boo#1029961) ==== lvm2-device-mapper ==== Subpackages: device-mapper libdevmapper-event1_03 libdevmapper1_03 libdevmapper1_03-32bit - prepare usrmerge (boo#1029961) ==== memcached ==== Version update (1.6.7 -> 1.6.9) - update to 1.6.9: * arm64: Re-add arm crc32c hw acceleration for extstore * restart mode: expose memory_file path in stats settings * 'shutdown graceful' command for raising SIGUSR1 * Introduce NAPI ID based worker thread selection (see doc/napi_ids.txt) * item crawler hash table walk mode * bugfixes - Trim history lesson from description. - Do not suppress errors from useradd. - Reduce hard dependency on systemd. ==== mutt ==== Version update (2.0.2 -> 2.0.3) Subpackages: mutt-doc mutt-lang - mutt 2.0.3: * Fix pager dropped input on SigWinch flag handling * Fix REPLY_TO environment variable handling * Fix undefined NULL pointer arithmetic * Fix exact-address recording of last value * Fix exact-address handling when addr->personal is set ==== net-snmp ==== Subpackages: libsnmp30 perl-SNMP snmp-mibs - Fix the python subpackage generation gh#openSUSE/python-rpm-macros#79 - Support multiple python 3 flavors in the python subpackage gh#openSUSE/python-rpm-macros#66 ==== netcat-openbsd ==== - Add port-select-on-connect.patch: if -s is given but not -p do not select port at bind() but at connect() time. ==== nodejs14 ==== Subpackages: npm14 - openssl_binary_detection.patch: fixes unit tests on SLE12 ==== opensc ==== Version update (0.19.0 -> 0.21.0) - OpenSC 0.21.0: * CVE-2020-26571: stack-based buffer overflow in the gemsafe GPK smart card software driver (boo#1177380) * CVE-2020-26572: stack-based buffer overflow in the TCOS smart card software driver (boo#1177378) * CVE-2020-26570: heap-based buffer overflow in the Oberthur smart card software driver (boo#1177364) * CardOS 5.x support boo#1179291 * Support for OAEP encryption, make SHA256 default * New separate debug level for PIN commands * Fix handling of card/reader insertion/removal events in pcscd * Fixes of removed readers handling * Fix Firefox crash because of invalid pcsc context * PKCS#11: Return CKR_TOKEN_NOT_RECOGNIZED for not recognized cards * Propagate ignore_user_content to PKCS#11 layer not to confuse applications * Minidriver: Fix check of ATR length (2-to 33 characters inclusive) * pkcs11-tool: allow using SW tokens * opensc-explorer asn1 accepts offsets and decode records * opensc-explorer cat accepts records * OpenPGP: Add new ec curves supported by GNUK * First steps supporting OpenPGP 3.4 * OpenPGP: Add support for EC key import * Rutoken: Add ATR for Rutoken ECP SC NFC * Improve detection of various CardOS 5 configurations * DNIe: Add new DNIe CA structure for the secure channel * ePass2003: Improve ECC support * ePass2003: Fix erase sequence * IAS-ECC: Fix support for Idemia Cosmo cards * IAS-ECC: PIN padding settings are now used from PKCS#15 info when available * IAS-ECC: Added PIN-pad support for PIN unblock * New driver for Gemalto IDPrime (only some types) * eDo: New driver with initial support for Polish eID card (e-dowód, eDO) * MCRD: Remove unused and broken RSA EstEID support * TCOS: Add missing encryption certificates * PIV: Add ATR of DOD Yubikey * fixed PIV global pin bug * CAC1: Support changing PIN with CAC Alt tokens - includes changes from 0.20.0 * CVE-2019-6502: memory leak in libopensc (boo#1122756) * CVE-2019-15946: out-of-bounds access of an ASN.1 Octet string (boo#1149747) * CVE-2019-15945: out-of-bounds access of an ASN.1 Bitstring (boo#1149746) * CVE-2019-19479: incorrect read operation during parsing of a SETCOS file attribute (boo#1158256) * CVE-2019-19480: improper free operation in sc_pkcs15_decode_prkdf_entry (boo#1158307) * Support RSA-PSS signature mechanisms using RSA-RAW * Added memory locking for secrets * added support for terminal colors * PC/SC driver: Fixed error handling in case of changing or removing the card reader * rename md_read_only to read_only and use it for PKCS#11 and Minidriver * allow global use of ignore_private_certificate * PKCS#11: Implement write protection (CKF_WRITE_PROTECTED) based on the card profile * PKCS#11: Add C_WrapKey and C_UnwrapKey implementations * PKCS#11: Handle CKA_ALWAYS_AUTHENTICATE when creating key objects * PKCS#11: Truncate long PKCS#11 labels with ... * PKCS#11: Fixed recognition of a token when being unplugged and reinserted * Minidriver: Register for CardOS5 cards * Minidriver: Add support for RSA-PSS * tools: Harmonize the use of option -r/--reader * goid-tool: GoID personalization with fingerprint * openpgp-tool: replace the options -L/--key-length with -t/--key-type * openpgp-tool: add options -C/--card-info and -K/--key-info * opensc-explorer: add command pin_info, extend random * pkcs11-register: Auto-configuration of applications for use of OpenSC PKCS#11 * pkcd11-register: Autostart * opensc-tool: Show ATR also for cards not recognized by OpenSC * pkcs11-spy: parse CKM_AES_GCM, EC Derive parameters * pkcs11-spy: Add support for CKA_OTP_* and CKM_*_PSS values * pkcs11-tool: Support for signature verification via --verify * pkcs11-tool: Add object type secrkey for --type option * pkcs11-tool: Implement Secret Key write object * pkcs11-tool: Add GOSTR3410-2012 support * pkcs11-tool: Add support for testing CKM_RSA_PKCS_OAEP * pkcs11-tool: Add extractable option to key import * pkcs11-tool: list more key access flags when listing keys * pkcs11-tool: Add support for CKA_ALLOWED_MECHANISMS when creating new objects and listing keys * pkcs15-crypt: *Handle keys with user consent * New separate CAC1 driver using the old CAC specification (#1502) * CardOS: Add support for 4K RSA keys in CardOS 5 * CardOS: Fixed decryption with CardOS 5 * Enable CoolKey driver to handle 2048-bit keys * EstEID: add support for a minimalistic, small and fast card profile based on IAS-ECC issued since December 2018 * GIDS Decipher fix (#1881) * GIDS: Allow RSA 4K support * MICARDO: Remove long expired EstEID 1.0/1.1 card support * MyEID: Add support for unwrapping a secret key with an RSA key or secret key * MyEID Add support for wrapping a secret key with a secret key * Support for MyEID 4K RSA * Support for OsEID * Gemalto GemSafe: add new PTeID ATRs, add support for 4K RSA keys * OpenPGP Card v3 ECC support * Add Rutoken ECP SC * Add Rutoken Lite * Add SmartCard-HSM 4K ATR * Add missing secp384r1 curve parameter * Stacros: Fix decipher with 2.3 * Stacros: Add ATR for 2nd gen. eGK * Stacros: Add new ATR for 3.5 * Stacros: Detect and allow Globalplatform PIN encoding * Fix TCOS IDKey support * TCOS: add encryption certificate for IDKey * Infocamere, Postecert, Cnipa: Remove profiles * Remove incomplete acos5 driver - drop patches now upstream: * opensc-0.19.0-piv_card_matching.patch * opensc-0.19.0-redundant_logging.patch * opensc-0.19.0-rsa-pss.patch ==== php7 ==== Subpackages: apache2-mod_php7 php7-ctype php7-dom php7-gd php7-gettext php7-iconv php7-json php7-mbstring php7-mysql php7-pdo php7-sqlite php7-tokenizer php7-xmlreader php7-xmlwriter - do not add mod_php to httpd.conf during %install (better fix for new apache2 from Apache development repo) + php-install-mod_php.patch - do not build php-cgi when not needed - only build extensions in cli ==== plymouth ==== Version update (0.9.5+git20200921+20778f2 -> 0.9.5+git20201026+53c83cc) Subpackages: libply-boot-client5 libply-splash-core5 libply-splash-graphics5 libply5 plymouth-dracut plymouth-plugin-label plymouth-plugin-two-step plymouth-scripts plymouth-theme-bgrt plymouth-theme-spinner - Update to version: 0.9.5+git20201026: Don't wait forever for a ping reply. ==== poppler ==== Version update (20.10.0 -> 20.12.0) Subpackages: libpoppler-cpp0 libpoppler-glib8 poppler-tools - Update to 20.12.0: + core: - Draw better circles for circle annotations - Fix annotation line width if no appearance stream or style are given - Tweak rendering of highlight annotations - Fix border rendering of some annotations - Fix rendering of some files. Issue #976 Issue #567 - PSOutputDev: provide options to set the rasterization color space and ICC profile - PSOutputDev: for splashModeCMYK8 and language level >=2 activate overprint emulation - PSOutputDev: use the DeviceN8 bitmap for rasterization with CMYK-output + overprint - Use the font name without subset tag when querying for a system font - Splash: Fix wrong x adjustment during clipping - Splash: Fix blitImage in uncolored tiling patterns - timeToDateString: We forgot the ' after the minutes - Move psLevel to PSOutputDev creation - Fix several issues in broken files + utils: - pdftops: provide options to set the rasterization color space and ICC profile - pdftops: for splashModeCMYK8 and language level >=2 activate overprint emulation ==== poppler-qt5 ==== Version update (20.10.0 -> 20.12.0) - Update to 20.12.0: + core: - Draw better circles for circle annotations - Fix annotation line width if no appearance stream or style are given - Tweak rendering of highlight annotations - Fix border rendering of some annotations - Fix rendering of some files. Issue #976 Issue #567 - PSOutputDev: provide options to set the rasterization color space and ICC profile - PSOutputDev: for splashModeCMYK8 and language level >=2 activate overprint emulation - PSOutputDev: use the DeviceN8 bitmap for rasterization with CMYK-output + overprint - Use the font name without subset tag when querying for a system font - Splash: Fix wrong x adjustment during clipping - Splash: Fix blitImage in uncolored tiling patterns - timeToDateString: We forgot the ' after the minutes - Move psLevel to PSOutputDev creation - Fix several issues in broken files + utils: - pdftops: provide options to set the rasterization color space and ICC profile - pdftops: for splashModeCMYK8 and language level >=2 activate overprint emulation ==== procps ==== Subpackages: libprocps8 - prepare usrmerge (boo#1029961) ==== psmisc ==== Subpackages: psmisc-lang - prepare usrmerge (boo#1029961) ==== python-dkimpy ==== Version update (1.0.3 -> 1.0.5) - update to 1.0.5 - Update dnsplug for DNS Python (dns) 2.0 compatibility (LP: #1888583) - Fix @param srv_id typos (LP: #1890532) - Correct dkim.verify processing to avoid errors when verifying messages with no DKIM signatures ==== rubygem-net-ssh ==== Version update (6.1.0 -> 6.2.0.rc1) New upstream release 6.2.0 rc1 * rsa-sha2-512, rsa-sha2-256 host_key algs [#771] * JRuby aes*-ctr suppport [#767] ==== smp_utils ==== Subpackages: libsmputils1-1 - Add missing ldconfig calls for libsmputils1-1. ==== subversion ==== Subpackages: libsvn_auth_gnome_keyring-1-0 libsvn_auth_kwallet-1-0 subversion-bash-completion subversion-perl subversion-server subversion-tools - use system apache rpm macros ==== sudo ==== Version update (1.9.3p1 -> 1.9.4) Subpackages: sudo-plugin-python - Update to 1.9.4 * The sudoers parser will now detect when an upper-case reserved word is used when declaring an alias. Now instead of "syntax error, unexpected CHROOT, expecting ALIAS" the message will be "syntax error, reserved word CHROOT used as an alias name". Bug #941. * Better handling of sudoers files without a final newline. The parser now adds a newline at end-of-file automatically which removes the need for special cases in the parser. * Fixed a regression introduced in sudo 1.9.1 in the sssd back-end where an uninitialized pointer could be freed on an error path. GitHub issue #67. * The core logging code is now shared between sudo_logsrvd and the sudoers plugin. * JSON log entries sent to syslog now use "minimal" JSON which skips all non-essential whitespace. * The sudoers plugin can now produce JSON-formatted logs. The "log_format" sudoers option can be used to select sudo or json format logs. The default is sudo format logs. * The sudoers plugin and visudo now display the column number in syntax error messages in addition to the line number. Bug #841. * If I/O logging is not enabled but "log_servers" is set, the sudoers plugin will now log accept events to sudo_logsrvd. Previously, the accept event was only sent when I/O logging was enabled. The sudoers plugin now sends reject and alert events too. * The sudo logsrv protocol has been extended to allow an AlertMessage to contain an optional array of InfoMessage, as AcceptMessage and RejectMessage already do. * Fixed a bug in sudo_logsrvd where receipt of SIGHUP would result in duplicate entries in the debug log when debugging was enabled. * The visudo utility now supports EDITOR environment variables that use single or double quotes in the command arguments. Bug #942. * The PAM session modules now run when sudo is set-user-ID root, which allows a module to determine the original user-ID. Bug #944. * Fixed a regression introduced in sudo 1.8.24 in the LDAP back-end where sudoNotBefore and sudoNotAfter were applied even when the SUDOERS_TIMED setting was not present in ldap.conf. Bug #945. * Sudo packages for macOS 11 now contain universal binaries that support both Intel and Apple Silicon CPUs. * For sudo_logsrvd, an empty value for the "pid_file" setting in sudo_logsrvd.conf will now disable the process ID file. - Remove sudo-1.9.3p1-pam_xauth.patch (upstreamed) ==== sysconfig ==== Subpackages: sysconfig-netconfig - Also support service(network) provides ==== sysvinit ==== Version update (2.97 -> 2.98) - Update to sysvinit 2.98: * Fixed time parsing in shutdown when there is a + in front of a 0 time offset. Commands with a postiive time offset (+1) would work but +0 fails. This has been corrected by Arkadiusz Miskiewicz. ==== telepathy-glib ==== Subpackages: libtelepathy-glib0 typelib-1_0-TelepathyGlib-0_12 - Drop python-xml BuildRequires: the installation is using python3. ==== telepathy-logger ==== Subpackages: libtelepathy-logger3 typelib-1_0-TelepathyLogger-0_2 - Build with python3 instead of python2: + Add 1.diff: tools: Fix the build with Python 3. + Drop python2-devel and python-xml BuildRequires. - Drop empty post/postun scriptlets that were calling glib2_gsettings_schema_post/postun: macros are now empty placeholder and the funcionality handled by file triggers. ==== tigervnc ==== Subpackages: libXvnc1 xorg-x11-Xvnc xorg-x11-Xvnc-module - x11vnc wrapper script: converted to python3 (boo#1179592) ==== vim ==== Version update (8.2.2039 -> 8.2.2105) Subpackages: gvim vim-data vim-data-common - Updated to version 8.2.2105, fixes the following problems * Viminfo is not written when creating a new file. * Terminal buffer disappears even when 'bufhidden' is "hide". (Sergey Vlasov) * Haskell filetype not optimally recognized. * Build failure with +profile but without +reltime. * GTK3: white border around text stands out. * Highlighting a character too much with incsearch. * Some test failures don't give a clear error. * Amiga: FEAT_ARP defined when it should not. * Amiga: obsolete code. * Amiga: obsolete function. * Search test contains unneeded sleeps. * Vim9: crash when aborting a user function call. * Vim9: "edit +4 fname" gives an error. (Naruhiko Nishino) * Vim9: lamba doesn't accept argument types. * Configure fails when building with the "implicit-function-declaration" error enabled, specifically on Mac. * Getting the selection may trigger TextYankPost autocmd. * Using mkview/loadview changes the jumplist. * Check for features implemented with "if". * Vim9: E1030 error when using empty string for term_sendkeys(). * <Cmd> does not handle CTRL-V. * Vim9: only one level of indexing supported. * terminal: cursor is on while redrawing, causing flicker. * Using map() and filter() on a range() is inefficient. * Vim9: assignment with += doesn't work. * Cursor position in popup terminal is wrong. * Transparent syntax item uses start/end of containing region. * The quickfix window is not updated after setqflist(). * Can't get the exit value in VimLeave or VimLeavePre autocommands. * Vim9: list assign doesn't except empty remainder list. * Vim9: list assign not well tested. * Vim9: for with unpack only works for local variables. * Vim9: using :normal from Vim9 script can't handle range. * Error for const argument to mapnew(). * Build failure with small features. * Illegal memory access when using :print on invalid text. (Dhiraj Mishra) * Vim9: cannot put a linebreak before or after "in" of ":for". * Vim9: no proper error message for using s:var in for loop. * Vim9: cannot handle a linebreak after "=" in assignment. * Vim9: can still use the depricated #{} dict syntax. * Vim9: crash when using ":silent!" and getting member fails. * CTRL-V U doesn't work to enter a Unicode character when modifyOtherKeys is effective. (Ken Takata) * Qt translation file is recognized as typescript. * Libvterm tests are only run on Linux. * Vim9: memory leak when statement is truncated. * Vim9: script test sometimes fails. * Vim9: dict does not accept a key in quotes. * Vim9: unpredictable errors for script tests. * Vim9: script test sometimes fails. * When an expression fails getting the next command may be wrong. * Vim9: crash when failed dict member is followed by concatenation. * Vim9: command modifiers not restored after assignment. * Vim9: using :silent! when calling a function prevents abortng that function. * Vim9: function argument of sort() and map() not tested. * Vim9: some checks are not tested. * Insufficient testing for function range and dict. * Vim9: memory leak when literal dict has an error and when an expression is not complete. * Vim9: not all error messages tested. * Vim9: unreachable code. * Build problem with Ruby 2.7. * Sound test is a bit flaky. ==== vlan ==== - prepare usrmerge (boo#1029961) ==== webkit2gtk3 ==== Subpackages: libjavascriptcoregtk-4_0-18 libwebkit2gtk-4_0-37 libwebkit2gtk3-lang typelib-1_0-JavaScriptCore-4_0 typelib-1_0-WebKit2-4_0 webkit2gtk-4_0-injected-bundles - Add old-wayland-scanner.patch for 15.0/15.1: support older wayland-scanner. Also renumber patches to group 15.0/15.1-specific patches together. - Have the libwebkit2gtk package require libjavascriptcoregtk of the same version (boo#1171531). ==== xfsdump ==== - prepare usrmerge (boo#1029961) ==== xorg-x11-server ==== Version update (1.20.9 -> 1.20.10) Subpackages: xorg-x11-server-Xvfb xorg-x11-server-extra xorg-x11-server-sdk xorg-x11-server-wayland - Update to version 1.20.10: * Check SetMap request length carefully. * Fix XkbSetDeviceInfo() and SetDeviceIndicators() heap overflows * present/wnmd: Translate update region to screen space * modesetting: keep going if a modeset fails on EnterVT * modesetting: check the kms state on EnterVT * configure: Build hashtable for Xres and glvnd * xwayland: Create an xwl_window for toplevel only * xwayland: non-rootless requires the wl_shell protocol * glamor: Update pixmap's devKind when making it exportable * os: Fix instruction pointer written in xorg_backtrace * present/wnmd: Execute copies at target_msc-1 already * present/wnmd: Move up present_wnmd_queue_vblank * present: Add present_vblank::exec_msc field * present: Move flip target_msc adjustment out of present_vblank_create * xwayland: Remove pending stream reference when freeing * xwayland: use drmGetNodeTypeFromFd for checking if a node is a render one * xwayland: Do not discard frame callbacks on allow commits * present/wnmd: Remove dead check from present_wnmd_check_flip * xwayland: Check window pixmap in xwl_present_check_flip2 * present/wnmd: Can't use page flipping for windows clipped by children * xfree86: Take second reference for SavedCursor in xf86CursorSetCursor * glamor: Fix glamor_poly_fill_rect_gl xRectangle::width/height handling * include: Increase the number of max. input devices to 256. * Revert "linux: Make platform device probe less fragile" * Revert "linux: Fix platform device PCI detection for complex bus topologies" * Revert "linux: Fix platform device probe for DT-based PCI" - Remove included pachtes * U_xfree86_take_second_ref_for_xcursor.patch * U_Revert-linux-Fix-platform-device-probe-for-DT-based-.patch * U_Revert-linux-Fix-platform-device-PCI-detection-for-c.patch * U_Revert-linux-Make-platform-device-probe-less-fragile.patch * U_Fix-XkbSetDeviceInfo-and-SetDeviceIndicators-heap-ov.patch * U_Check-SetMap-request-length-carefully.patch - remove unneeded python2 script 'fdi2iclass.py' from xorg-x11-server-sources subpackage (boo#1179591) ==== yast2-firstboot ==== Version update (4.3.8 -> 4.3.9) - Fix: Starting YaST2 Control Center if the flag SHOW_Y2CC_CHECKBOX has been set in /etc/sysconfig/firstboot and the user has selected it while the firstboot installation workflow (bsc#1178834). - 4.3.9 ==== yast2-installation ==== Version update (4.3.22 -> 4.3.24) - Do not cleanup the libzypp cache when the system has low memory, incomplete cache confuses libzypp later (bsc#1179415) - 4.3.24 - Starting YAST2 Control Center if it has been set while an yast2-firstboot installation workflow (bsc#1178834). - 4.3.23 ==== yast2-trans ==== Version update (84.87.20201130.b140fdb5f7 -> 84.87.20201205.6b65f14502) Subpackages: yast2-trans-af yast2-trans-ar yast2-trans-bg yast2-trans-bn yast2-trans-bs yast2-trans-ca yast2-trans-cs yast2-trans-cy yast2-trans-da yast2-trans-de yast2-trans-el yast2-trans-en_GB yast2-trans-es yast2-trans-et yast2-trans-fa yast2-trans-fi yast2-trans-fr yast2-trans-gl yast2-trans-gu yast2-trans-hi yast2-trans-hr yast2-trans-hu yast2-trans-id yast2-trans-it yast2-trans-ja yast2-trans-jv yast2-trans-ka yast2-trans-km yast2-trans-ko yast2-trans-lo yast2-trans-lt yast2-trans-mk yast2-trans-mr yast2-trans-nb yast2-trans-nl yast2-trans-pa yast2-trans-pl yast2-trans-pt yast2-trans-pt_BR yast2-trans-ro yast2-trans-ru yast2-trans-si yast2-trans-sk yast2-trans-sl yast2-trans-sr yast2-trans-sv yast2-trans-ta yast2-trans-th yast2-trans-tr yast2-trans-uk yast2-trans-vi yast2-trans-wa yast2-trans-xh yast2-trans-zh_CN yast2-trans-zh_TW yast2-trans-zu - Update to version 84.87.20201205.6b65f14502: * Translated using Weblate (Dutch) * Translated using Weblate (Slovak) * Translated using Weblate (German) * Translated using Weblate (Czech) * Translated using Weblate (Japanese) * Translated using Weblate (Catalan) * New POT for text domain 'update'. * New POT for text domain 'cluster'. * Translated using Weblate (Slovak) * Translated using Weblate (Czech) * Translated using Weblate (Slovak) * Translated using Weblate (Japanese) * Translated using Weblate (Dutch) * Translated using Weblate (Catalan) * New POT for text domain 'storage'. * Translated using Weblate (Portuguese) * New POT for text domain 'users'. * Translated using Weblate (Czech) * Translated using Weblate (Slovak) * Translated using Weblate (Japanese) * Translated using Weblate (Dutch) * Translated using Weblate (Catalan) * New POT for text domain 'control'.

1 0