November 2017 - openSUSE Factory - openSUSE Mailing Lists

[opensuse-factory] Announcing Tumbleweed Snapshots: Rolling With You
by Jimmy Berry 25 Nov '17

25 Nov '17

Some of you may remember over a year ago when I proposed the concept of Tumbleweed Snapshots [1] and later the prototype that I provided [2]. Today I would like to announce hosting for the snapshots, that is not inside my house :), and ready to use! For those not familiar with the concept I will describe it in the form to which it has evolved. Tumbleweed, being a rolling distribution, is constantly changing and packages are constantly being rebuilt against one another and updating requirements. As such it becomes necessary to update even when undesirable. For example, one is running snapshot 17 and the next day snapshot 18 contains a QT update that rebuilt a large number of packages. When attempting to install an application that depends on QT one is greeted with an ugly unresolveable error. It is then necessary to run a full update, likely very large with many unrelated changes, in order to simply install an application as would have been possible yesterday. If a remote repository containing historical snapshots was available one could simply install the application and perhaps the handful of new dependencies it requires rather than having to update the entire system. This provides one with the benefits of a rolling distribution without requiring the constant change. A week later when a new kernel and DRM stack provides an exciting feature it is still easy to update everything and be running the latest code, but the user is not interrupted by having to update when it should not be necessary. >From another angle, the capabilities of rollback using snapper and btrfs are widely advertised, but the cumbersome and rather unusable state in which a user is left is not commonly discussed. If for example a kernel and/or network manager update completely break network functionality for certain users they can rollback, but then what. As they wait for a fix their installation falls further behind and with that it becomes less and less likely that installing a new package will function properly. On a similar note, if one wanted to install debuginfo packages it is many times impossible without first updating that application and with it many of its dependencies. All of these scenarios have occurred to either myself or friends or family. These problems of course do not exist in fixed releases like Leap, but the latter of course does not provide the latest sources. Tumbleweed Snapshots provides the best of both worlds, the latest packages when you want them and the one package you need in the middle of working on a project. If you are interested in trying out the snapshots just update to any snapshot past 20171120 like you would normally and then perform the following. zypper in tumbleweed-cli tumbleweed init During `init` the original repo files are kept and can be restored by: tumbleweed uninit If you are curious, run `zypper lr -U` before and after the init to see the URLs change. Originally, this was done via direct manipulation of the repo file, but was refactored to a libzypp config option [3] and later as vars.d/ by mlandres. The final implementation simply updates the text file /etc/zypp/vars.d/snapshotVersion after changing OSS and NON-OSS repo URLS to include the variable. The latest snapshot will always redirect to the standard mirror network until it is no longer the latest snapshot at which point it will be served directly. This means that when performing rollbacks via snapper or simply waiting a few days after updating the URL never needs to change and continues to work as expected. All zypper operations are unaffected except that the target snapshot needs to be changed in order to update, but that is made easy. tumbleweed switch or to switch, refresh, and dup tumbleweed update For full list of commands and options `tumbleweed --help` or see documentation [4]. A short video demonstration is also available [5]. Lastly, if there are mirror administrators interested in hosting/mirror the snapshots let me know. Using various tools for interacting with S3 it should be easy to make a copy of the public bucket. For those interested, take a look at the variations of the tool that creates the snapshots [6]. An aside, due to rsync.opensuse.org being regularly out-of-sync and not yet having access to stage.opensuse.org I am relying on up-to-date mirrors that have stage access and thus will be triggering the snapshots manually util that is resolved. As such the latest snapshot may not always redirect immediately. The reason for the delay was waiting for official hosting by openSUSE which has seen no tangible progress after a year. As such I decided to just move forward rather than needlessly delay this any longer. Depending on the interest it should clear what sort of costs will be incurred on AWS. I have further plans to provide more information about the snapshots and issues pertaining to them to aid users in knowing when to update so stay tuned. Enjoy! [1] https://lists.opensuse.org/opensuse-factory/2016-10/msg00591.html [2] https://lists.opensuse.org/opensuse-factory/2016-12/msg00025.html [3] https://github.com/openSUSE/libzypp/pull/68 [4] https://github.com/boombatower/tumbleweed-cli [5] https://www.youtube.com/watch?v=RkDwGiS9Kcc [6] https://github.com/boombatower/tumbleweed-snapshot -- Jimmy -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

6 10

[opensuse-factory] Wish to have pdftk (back) in opensuse
by Thomas Nielsen 24 Nov '17

24 Nov '17

Hello I just again successfully used pdftk to manage pages in pdf files, and wonder why it is not to be found in the opensuse tw channels? I have forgot howto formally wish for a package to be included?? The product home page is here (rpm at the bottom of the page) https://www.pdflabs.com/tools/pdftk-server/ and there is already a suse build here : https://software.opensuse.org/package/pdftk?search_term=pdftk Just to say, that there is no big architectural work to do to include it and to make it run on opensuse. Thomas

14 23

[opensuse-factory] tumbleweed ps-printer firefox / thunderbird not printing
by Simon Becherer 24 Nov '17

24 Nov '17

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, tumbleweed20171109+kde i recognized at the moment that firefox and thunderbird will not print on old postscript (non pdf) printers. (on pdf printers printing fine) i am not 100% shure if this has to do with one of the last updates from tumbleweed in last month, because i do printing verry seldom on this system, maybe i have never printed since install in august 2017, and this is a normal behavior? (with old cups (ps standart) and verry old opensuse versions never had any problems. starting ff or tb in cosole, when i open the printing or the "setup page" dialog i get always "failed to get find a colord device: The name org.freedesktop.ColorManager was not provided by any .service files" but i do not think that this has anithing to do with the printing/not printing (because also on pdf printers this message appears). printing from libreoffice, evince, okular or gimp works fine with tumbleweed and this old ps printers. in thunderbird i am able to print if i do "file" "setup page" and chose there the correct ps printer. the standard setting "portable dokument for all printers" will not work. in firefox trying same, "print-preview" "setup page" select the printer, but this still makes no printing. is this a bug of mozilla or of cups or of integration, or a wrong settings somewhere, and if a bug where should i report it? thanks simoN - -- B e c h e r e r GmbH Sondermaschinenbau Mauermatten Strasse 22 79183 Waldkirch Germany Tel.: (+49) (0)7681 3134 Fax: (+49) (0)7681 4378 Mail: info(a)becherer.de Web: www.becherer.de USt-ID-Nr.: DE 814912198 Registergericht: Freiburg HRB 701860 Geschäftsführer: Dipl.-Ing. (FH), EWE Simon H. Becherer Gerichtsstand / Sitz: Waldkirch Es gelten ausschließlich unsere allgemeinen Liefer- und Zahlungsbedingungen / Einkaufsbedingungen: www.becherer.de/AGB -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.19 (GNU/Linux) iQIcBAEBAgAGBQJaFvnzAAoJEOuDxDCJWQG+K1oQALkfG6TXGPs6rswlYmkFV6zO g+ercJ6jxmmC4l36PzvG2rvTl1xd0hgs2M6koEtZLRhmSkZ//A0k7jHJFkoNhyXA jt4/ah9/pg8dumKkQNeKK5JVF2bbMT10vYb5ek95cPHvWgP0QLaVYLAm3bZvaGtY SdWEyKy+KABJqSUZOYv/IyLe0T+MBTQ6lcqSrRnKN4pwgzHWzhobypGMK/zlKb4t UBhPutaPM3NKk5DKrAEvit0GRPY+AbJDf9KjGkFod2E0+Ge13ZWXTYMy/6QsDPOH qDD6RL1fKInfoIl7OpJ1vLfzAjKV1KB++dKcZwHn6163gmlDEuawcBEqBRzxC83C Fn9ZwfkSGTujMPQxxNQcdwlYZDSyd0SrVOArPSz1Vuymi78UaJgOq6qBmx85tC6P /mMUXfjXSUkWVRYp77dr7+42RNYGe07ss7aaHRTNqO4xkNZbyHM0KngITy7/Ghgl 0CrM3KlZohl1yYGtyl9yzFfHBIwuYm6gz4Ko7w2nCZ2SWY0Bx2v7eBJDDO3NDPtI ngH0c6d1uo/YQd+p34ZOnTYMEsrzZVhJnQxI27S8WWqdob/IYFUM+lMyVxiClyWu yik0GUKfVMwb77KFvyyWC5xX4pUGZi+zNQz4GWD9T8NYFb/mIhziQS80eUTFNWVt 7esqJQ4gSvnvn95TezMT =YnFw -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 2

Re: [opensuse-factory] Tumbleweed - Review of the week 2017/47
by Dominique Leuenberger / DimStar 24 Nov '17

24 Nov '17

On Fri, 2017-11-24 at 16:08 +0100, Francesco Montesano wrote: > Hi Dominique, > > 2017-11-24 15:29 GMT+01:00 Dominique Leuenberger / DimStar > <dimstar(a)opensuse.org>: > > Dear Tumbleweed users and hackers, > > > > Everybody is back from hack week - and it shows. In the last week, > > Tumbleweed had 5 snapshots released (1117, 1120, 1121, 1122 and > > 1123). > > Snapshots 1118 and 1119 were blocked by openQA as our autofs / NFS > > tests failed. Turned out to be an (intentional) change in the > > kernel. > > Once the issue was understood, the test was quickly adjusted to the > > new > > behavior and 1120 could be released without delays (if you're > > interested, this was processed in bug 068916). > > I have to logged into bugzilla.opensuse.org and searched for the > above bug > but I got a big red banner saying: > > You are not authorized to access bug #068916. > > So now I'm even more curious about it :D Apologies, it helps if I type the bug number correct: https://bugzilla.opensuse.org/show_bug.cgi?id=1068916 This should be accessible without special rights. Cheers Dominique

1 0

[opensuse-factory] New Tumbleweed snapshot 20171123 released!
by Dominique Leuenberger 24 Nov '17

24 Nov '17

Please note that this mail was generated by a script. The described changes are computed based on the x86_64 DVD. The full online repo contains too many changes to be listed here. Please check the known defects of this snapshot before upgrading: https://openqa.opensuse.org/tests/overview?distri=opensuse&groupid=1&versio… When you reply to report some issues, make sure to change the subject. It is not helpful to keep the release announcement subject in a thread while discussing a specific problem. Packages changed: apache2 bind calligra digikam installation-images-Kubic (14.342 -> 14.343) kiwi (7.04.38 -> 7.04.40) kmod libfabric (1.5.1 -> 1.5.2) liblogging libnettle (3.3 -> 3.4) libpsm2 (10.2.260 -> 10.3.17) libyui (3.3.3 -> 3.4.0) libyui-ncurses (2.48.4 -> 2.49.0) lynx (2.8.9~dev.14 -> 2.8.9~dev.16) ovmf (2017+git1505340320.5afa5b8159 -> 2017+git1510945757.b2662641d5) perl-Devel-StackTrace (2.02 -> 2.03) perl-JSON (2.94 -> 2.97000) pidgin python-numpy python3 python3-base ruby2.4 (2.4.1 -> 2.4.2) spamassassin time (1.7 -> 1.8) unison (2.48.3 -> 2.48.4) xkbcomp xkeyboard-config xrandr xset ypserv === Details === ==== apache2 ==== Subpackages: apache2-devel apache2-doc apache2-example-pages apache2-prefork apache2-utils - APACHE_MODULES now contains authn_core in default configuration [bsc#1066661] ==== bind ==== Subpackages: bind-chrootenv bind-doc bind-utils idnkit libbind9-140 libdns165 libidnkit1 libirs141 libisc160 libisccc140 libisccfg140 liblwres141 - Use python3 by default (fate#323526) ==== calligra ==== Subpackages: calligra-doc calligra-extras-dolphin calligra-extras-okular calligra-lang calligra-sheets calligra-stage calligra-words - Add fix-build-with-newer-kcalcore.patch to make it build with KDE Applications 17.12 ==== digikam ==== Subpackages: kipi-plugins kipi-plugins-lang - Add Adapt-to-KCalCore-API-changes.patch to make it build with KDE Applications 17.12 ==== installation-images-Kubic ==== Version update (14.342 -> 14.343) - merge gh#openSUSE/installation-images#216 - adjust to ruby2.5 - 14.343 ==== kiwi ==== Version update (7.04.38 -> 7.04.40) Subpackages: kiwi-desc-isoboot kiwi-desc-netboot kiwi-desc-oemboot kiwi-desc-vmxboot kiwi-doc kiwi-media-requires kiwi-templates - v7.04.40 released - Tumbleweed templates: drop pam-modules dependency - kiwi.spec: Prepare for Tumbleweed moving to suse_version 1550 - v7.04.39 released - KIWIImage: add grub2-mkimage prefix option grub2-mkimage on openSUSE Leap 42.3 now requires "-p" option. See also ece8cb9e - Keep Melanox and hyperv kernel modules in the initrd + Due to jitters in boot on Azure the drivers are not always found, keeping then in the initrd avoids the issue in the virtualized environment - Fixed blocksize setup in losetup The -L option was used to set the blocksize value for losetup However there is an option name clash between suse util-linux and upstream which now leads to the problem that option -L has changed its meaning and actually means --nooverlap which completely breaks the call in kiwi. This patch changes the call to use the long form --logical-blocksize. This Fixes bsc#1066873 ==== kmod ==== Subpackages: kmod-compat libkmod2 - Move dependency on suse-module-tools to kmod-compat (bsc#1047911). ==== libfabric ==== Version update (1.5.1 -> 1.5.2) - Update to v1.5.2 - Core - Fix Power PC 32-bit build - Sockets - Fix incorrect reporting of counter attributes - Verbs - Fix reporting attributes based on device limits - Fix incorrect CQ size reported for iWarp NICs - Update man page with known issues for specific NICs - Fix FI_RX_CQ_DATA mode check - Disable on-demand paging by default (can cause data corruption) - Disable loopback (localhost) addressing (causing failures in MPI) ==== liblogging ==== - fix SLE 12 build ==== libnettle ==== Version update (3.3 -> 3.4) Subpackages: libhogweed4 libhogweed4-32bit libnettle-devel libnettle6 libnettle6-32bit - libnettle 3.4: * Fixed an improper use of GMP mpn_mul, breaking curve2559 and eddsa on certain platforms * Fixed memory leak when handling invalid signatures in ecdsa_verify. Fix contributed by Nikos Mavrogiannopoulos. * Reorganized the way certain data items are made available: Nettle header files now define the symbols nettle_hashes, nettle_ciphers, and nettle_aeads, as preprocessor macros invoking a corresponding accessor function. For backwards ABI compatibility, the symbols are still present in the compiled libraries, and with the same sizes as in nettle-3.3. * Support for RSA-PSS signatures * Support for the HKDF key derivation function, defined by RFC 5869 * Support for the Cipher Feedback Mode (CFB) * New accessor functions: nettle_get_hashes, nettle_get_ciphers, nettle_get_aeads, nettle_get_secp_192r1, nettle_get_secp_224r1, nettle_get_secp_256r1, nettle_get_secp_384r1, nettle_get_secp_521r1. Direct access to data items is deprecated going forward. * The base16 and base64 functions now use the type char * for ascii data, rather than uint8_t *. This eliminates the last pointer-signedness warnings when building Nettle * The contents of the header file nettle/version.h is now architecture independent, except in --enable-mini-gmp * Prevent data sizes from leaking into the ABI - Fixes previously carried as patches: * Fix compilation error with --enable-fat om ARM Drop nettle-3.3-fix-fat-arm.patch ==== libpsm2 ==== Version update (10.2.260 -> 10.3.17) Subpackages: libpsm2-2 libpsm2-compat - Updated to version 10.3.17: - Small bug fixes and some enhanced debugging. - Assigned context is not freed on close() which could lead to context starvation. Therefore release hfi1 mappings when closing a context. - Close receive thread only while closing last endpoint - Rebase libpsm2-include-ioctl_h.patch, libpsm2-use_RPM_OPT_FLAGS.patch and libpsm2-use-exported-variable-for-version-and-release.patch to the latest sources. ==== libyui ==== Version update (3.3.3 -> 3.4.0) - Support for sending a widget ID with Shift-F6 for automated testing (fate#324098) - 3.4.0 ==== libyui-ncurses ==== Version update (2.48.4 -> 2.49.0) - Send a widget ID with Shift-F6 for automated testing (fate#324098) - 2.49.0 ==== lynx ==== Version update (2.8.9~dev.14 -> 2.8.9~dev.16) - update to 2.8.9dev.16: * add a note in the comments for INCLUDE in lynx.cfg regarding the default directory searches LYOpenCFG(), added in 2.8.4dev.20 (Debian #818047) -TD * add a check to ensure that HTML_put_string() will not append a chunk onto itself (report by Ned Williamson) -TD * add note in lynx.cfg about default values (Debian #408448) -TD * amended Backes' change to the COLLAPSE_BR_TAGS feature for compatibility -TD + use ENABLE_LYNXRC to determine whether it is written to the .lynxrc file. + add command-line option, etc., for controlling whether blank lines are trimmed, e.g., trailing lines as well as the special case for collapsing br-tags. Leading blank lines at the top of the document are untouched. + modify limit for trimmed lines to retain as little as 1 line; previously the trimming would go no smaller than 2 lines. * add command-line option and options-menu item for COLLAPSE_BR_TAGS (patch by Peter Backes). * correct logic in HTCopy() when re-reading a page (Debian #863008) -TD ==== ovmf ==== Version update (2017+git1505340320.5afa5b8159 -> 2017+git1510945757.b2662641d5) Subpackages: qemu-ovmf-x86_64 - Update to 2017+git1510945757.b2662641d5 + ArmPlatformPkg/ArmPlatformLibNull: remove bogus PCD dependencies + MdeModulePkg/UsbMassStorageDxe: Enhance Request Sense Handling + OvmfPkg: save on I/O port accesses when the debug port is not in use + OvmfPkg: create a separate PlatformDebugLibIoPort instance for SEC + OvmfPkg: make PlatformDebugLibIoPort a proper BASE library + OvmfPkg: restore temporary SEC/PEI RAM size to 64KB + OvmfPkg/Sec/X64: seed the temporary RAM with PcdInitValueInTempStack + ArmVirtPkg: switch to new PL011UartLib implementation + OvmfPkg/XenHypercallLib: enable virt extensions for ARM + MdeModulePkg/PiSmmCore: Implement heap guard feature for SMM mode + MdeModulePkg/DxeCore: Implement heap guard feature for UEFI + ArmVirtPkg/ArmVirtQemu: use non-accelerated CopyMem for VariableRuntimeDxe + NetworkPkg: Fix incorrect SizeofHeaders returned from HttpTcpReceiveHeader() + NetworkPkg: Print error message to screen if error occurs during HTTP boot + MdeModulePkg/PartitionDxe: Fix UDF fs access on certain CD/DVD medias + MdeModulePkg/UsbMassStorageDxe: Fix USB Mass Storage detection + MdeModulePkg SerialDxe: Handle Timeout change more robustly + CryptoPkg/BaseCryptLib: Fix mismatched memory allocation/free + CryptoPkg/BaseCryptLib: Fix buffer overflow issue in realloc wrapper + ArmPlatformPkg/PlatformPeim: allow PlatformPeiLib to set the boot mode + Deprecate EFI_VARIABLE_AUTHENTICATED_WRITE_ACCESS + SecurityPkg: Remove Counter Based AuthVariable support + BaseTools/tools_def AARCH64 ARM: disable PIE linking + NetworkPkg/TlsAuthConfigDxe: Remove the extra FreePool + NetworkPkg/HttpBootDxe: Add IPv6 support condition check + NetworkPkg/IScsiDxe: Fix the incorrect/needless DHCP process + MdeModulePkg/PciBus: Fix bug that PCI BUS claims too much resource + UefiCpuPkg/MtrrLib: Use SetMem instead of SetMem64 to fix hang + NetworkPkg: Remove ping6 and ifconfig shell application + OvmfPkg: fix dynamic default for oprom verification policy PCD without SB + OvmfPkg/PlatformPei: DENY_EXECUTE_ON_SECURITY_VIOLATION when SEV is active + SecurityPkg\Tcg2Pei: FV measure performance enhancement + SecurityPkg:AuthVariableLib:Implement ECR1707 for Private Auth Variable + ArmPlatformPkg: Store initial timer value + ArmVirtPkg ArmVirtDxeHobLib: Implement BuildFv3Hob + MdeModulePkg/Variable/RuntimeDxe: delete and lock OS-created MOR variable + ArmPkg/PlatformBootManagerLib: fix bug in ESRT invocation + OvmfPkg/PciHotPlugInitDxe: translate QEMU's resource reservation hints + OvmfPkg/PciHotPlugInitDxe: generalize RESOURCE_PADDING composition + OvmfPkg/IndustryStandard: define PCI Capabilities for QEMU's PCI Bridges + MdeModulePkg/BdsDxe: Don't delete "BootNext" until booting it + Clarify the usage of HttpConfigData in HTTP protocol + SecurityPkg/SecureBootConfigImpl.c: Secure Boot DBX UI Enhancement + MdeModulePkg/UDF: Fix creation of UDF logical partition + CryptoPkg: Add new API to retrieve commonName of X.509 certificate + OvmfPkg/VirtioNetDxe: log debug message in VirtioNetExitBoot() + OvmfPkg/QemuBootOrderLib: recognize "usb-storage" devices in XHCI ports + MdeModulePkg/Core: Fix out-of-sync issue in GCD + UefiCpuPkg/CpuDxe: Fix out-of-sync issue in page attributes + OvmfPkg/QemuVideoDxe/VbeShim: handle PAM1 register on Q35 correctly + OvmfPkg/QemuVideoDxe/VbeShim: rename Status to Segment0AllocationStatus + OvmfPkg/CsmSupportLib: move PAM register addresses to IndustryStandard + NetworkPkg/IScsiDxe: Remove redundant call to StrLen + BaseTools/tools_def AARCH64: enable frame pointers for RELEASE builds + ArmPkg/PlatformBootManagerLib: process pending capsules + MdeModulePkg/Udf: Avoid declaring and initializing local GUID variable + MdeModulePkg/UdfDxe: Avoid short (single character) variable name + MdeModulePkg/UdfDxe: Use compare operator for non-boolean comparisons + MdeModulePkg/UdfDxe: Fix operands of different size in bitwise OP + MdeModulePkg/UdfDxe: Add checks to ensure no possible NULL ptr deref + MdeModulePkg/SerialDxe: Fix not able to change serial attributes + NetworkPkg: Remove the redundant '/' in the end of returned ISCSIMacAddr keyword + MdeModulePkg/UdfDxe: Fix NULL pointer dereference + OvmfPkg/VirtioNetDxe: negotiate VIRTIO_F_IOMMU_PLATFORM + OvmfPkg/VirtioNetDxe: map caller-supplied Tx packet to device-address + OvmfPkg/VirtioNetDxe: add Tx packet map/unmap helper functions + OvmfPkg/VirtioNetDxe: update TechNotes + OvmfPkg/VirtioNetDxe: dynamically alloc transmit header + OvmfPkg/VirtioNetDxe: alloc RxBuf using AllocateSharedPages() + OvmfPkg/VirtioNetDxe: map VRINGs using VirtioRingMap() + OvmfPkg/VirtioNetDxe: add helper VirtioNetUninitRing() - Update openssl to 1.1.0g ==== perl-Devel-StackTrace ==== Version update (2.02 -> 2.03) - updated to 2.03 see /usr/share/doc/packages/perl-Devel-StackTrace/Changes 2.03 2017-11-18 - If all frames in the trace were skipped (via skip_frames, frame_filter, ignore_*, etc.), then the stringified stack trace would be an empty string. Now this has been changed to always return the message given to the constructor or the string "Trace begun". Fixes GH #15, reported by Karen Etheridge. ==== perl-JSON ==== Version update (2.94 -> 2.97000) - updated to 2.97000 see /usr/share/doc/packages/perl-JSON/Changes 2.97000 2017-11-21 - updated backportPP with JSON::PP 2.97000 - use 5 digit minor version number for a while to avoid confusion - fixed is_bool to use blessed() instead of ref() - updated to 2.96 see /usr/share/doc/packages/perl-JSON/Changes 2.96 2017-11-20 - fixed packaging issue - updated backportPP with JSON::PP 2.96 - not to use newer Test::More features (RT-122421; ilmari++) 2.95 2017-11-20 - updated backportPP with JSON::PP 2.95 ==== pidgin ==== Subpackages: libpurple libpurple-lang libpurple-plugin-sametime libpurple-tcl - Add purple-import-empathy Recommends for SLE15 (FATE#322984). ==== python-numpy ==== Subpackages: python2-numpy python3-numpy - Add 'family "NumPy"' to modules file to avoid that different versions of this get loaded. ==== python3 ==== Subpackages: python3-curses python3-dbm python3-tk - move 2to3 to python3-tools package ==== python3-base ==== Subpackages: libpython3_6m1_0 python3-idle - move 2to3 to python3-tools package ==== ruby2.4 ==== Version update (2.4.1 -> 2.4.2) Subpackages: libruby2_4-2_4 ruby2.4-devel ruby2.4-stdlib - disable jemalloc again because of: (boo#1068883) https://github.com/jemalloc/jemalloc/issues/937 - Add conflicts to libruby to make sure ruby and ruby-stdlib are also updated when libruby is updated (bsc#1048072.) - devel package needs to require jemalloc-devel when building with it - only use jemalloc on opensuse and sle >= 15 - update to 2.4.2 - CVE-2017-0898: Buffer underrun vulnerability in Kernel.sprintf (boo#1058755) - CVE-2017-10784: Escape sequence injection vulnerability in the Basic authentication of WEBrick (boo#1058754) - CVE-2017-14033: Buffer underrun vulnerability in OpenSSL ASN1 decode (boo#1058757) - CVE-2017-14064: Heap exposure in generating JSON (boo#1056782) - Multiple vulnerabilities in RubyGems (boo#1056286) CVE-2017-0899 CVE-2017-0900 CVE-2017-0901 CVE-2017-0902 - Update bundled libyaml to version 0.1.7. - There are also many bug-fixes. For more details see: https://github.com/ruby/ruby/compare/v2_4_1...v2_4_2 - added https://bugs.ruby-lang.org/attachments/download/6735/configure-2.4.2.diff to allow building with libgmp and libjemalloc again - provide a ruby-default symbol and conflict with other providers of that symbol so we can uninstall older default ruby versions during zypper dup. ==== spamassassin ==== Subpackages: perl-Mail-SpamAssassin - Update umask in cronjob (boo#861539) - Make sure that spamd can start (boo#961291) ==== time ==== Version update (1.7 -> 1.8) - time 1.8: * license changed to GPL-3.0+ - incorporate functionality previously carried as patches: * -q/--quiet option to suppresses abnormal program terminal (non-exit codes or signals). Drop time-debian-quiet.patch Drop time-fedora-verbose.patch * use the following exit codes (same as GNU coreutils' env): 125 = Wrong usage or internal error prior to exec attempt. 126 = Program located, but not usable. 127 = Could not find program to exec. * exit with code '128 + Signal number' when the program is terminated by a signal. Drop time-debian-non-normal-exit.patch * report MAX-RSS values correctly on modern systems Drop time-fedora-ru_maxrss-is-in-kilobytes-on-Linux.patch Drop time-fedora-Recompute-CPU-usage-at-microsecond-level.patch * Use gnulib modules and build infrastructure. * New tests infrastructure (make check). - drop unneeded patches: * time-debian-bug-address.patch * time-alpha.patch * time-debian-configure.patch * time-debian-info-direntry.patch * time-debian-info-nav.patch * time-debian-rusage-portability.patch * time-fsf-address.patch - add upstream keyring and verify source signature ==== unison ==== Version update (2.48.3 -> 2.48.4) - Update to 2.48.4 * Fix build for OCaml 4.03 (and add Makefile improvements for exporting under git) * Better reporting for OCaml compiler version mismatch - drop patch unison-ocaml-4.03.patch: Change included in upstream sources ==== xkbcomp ==== - Add U_xkbcomp_pkgconfig-add-bindir.patch: pkgconfig: Add our bindir to xkbcomp.pc. ==== xkeyboard-config ==== Subpackages: xkeyboard-config-lang - Add U_xkeyboard-config_fix-typo-hungarian.patch: Fix typo in hungarian (fdo#103123). ==== xrandr ==== - Add U_xrandr_suppress-misleading-indentation-warning.patch: When printing out rotations, we print a space before any item other than the first, and set `first = False` in each block where we print. However, this is done in the same line as the conditional that checks if first is set, which may give the impression that the assignment is also under the conditional. This is not the case, and recent GCC warns about this. - Add U_xrandr_add-filter-flag.patch: Flag can be set to "nearest" or "bilinear". ==== xset ==== - Add U_xset_fix-warning-about-usage-format-string.patch: Fix one last warning about usage() format string. ==== ypserv ==== - Prepare for new fillup location - Remove check for transactional-update, done in systemd macros now -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] Tumbleweed - Review of the week 2017/47
by Dominique Leuenberger / DimStar 24 Nov '17

24 Nov '17

Dear Tumbleweed users and hackers, Everybody is back from hack week - and it shows. In the last week, Tumbleweed had 5 snapshots released (1117, 1120, 1121, 1122 and 1123). Snapshots 1118 and 1119 were blocked by openQA as our autofs / NFS tests failed. Turned out to be an (intentional) change in the kernel. Once the issue was understood, the test was quickly adjusted to the new behavior and 1120 could be released without delays (if you're interested, this was processed in bug 068916). The five snapshots brought these updates: * Linux kernel 4.14.0 * xfsprogs4.13.1 (upgraded from 4.9.0) * More work towards the goal of making /var a separate btrfs volume, simplifying the volume layout * Mono 5.4.1 * Java 1.7.0 OpenJDK has been removed as announced Many things mentioned last week in the 'forging' section are still work in progress: * Linux kernel 4.14.1 (snapshot 1124) and 4.14.2 (staged) * SCons changes to use python3 as its interpreter * PostgreSQL 10 to appear (just received a new set today, currently testing) * openSSL 1.1 as default for the distro (Amarok needs help/love) * YaST/Storage-NG * Tumbleweed will move its suse_version from 1330 to 1550 by Dec 1st, 2017. Cheers, Dominique

1 0

[opensuse-factory] I can't create a bugzilla on LXDE for TW
by Carlos E. R. 23 Nov '17

23 Nov '17

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi. I went to "search package" web page: <https://software.opensuse.org/package/lxdm> - From there I found that package is in X11:LXDE repo. I click on the OBS link: <https://build.opensuse.org/package/show/X11%3Alxde/lxdm> and there on the report bug. I write the bug, and I get this error in bugzilla: Assignee: sfalken(a)cloverleaf-linux.org did not match anything CC: allau(a)novell.com did not match anything jubalh(a)iodoru.org did not match anything lrupp(a)suse.com did not match anything LXDE is a main package (oss repo) in Leap, but not in TW, it is in an extra repo. I found a bug and wanted to report it, but I can't. What do I do next? - -- Cheers Carlos E. R. (from 42.2 x86_64 "Malachite" at Telcontar) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iEYEARECAAYFAloTRCYACgkQtTMYHG2NR9XDEQCgjFCqGzQO7DDODnqsfsF9rW1G pNcAn0ETkmVXjDleBq5XMIugbMjHzuFp =d7Mc -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

7 12

[opensuse-factory] After upgrade to Tumbleweed 20171120 dovecot fails to start
by Freek de Kruijf 23 Nov '17

23 Nov '17

I have the following messages in the dovecot log: nov 22 14:43:40 eiktum auth[11418]: pam_kwallet5: Couldn't create directory: / home/freek/.local/share because: 13-Permission denied nov 22 14:43:40 eiktum auth[11418]: pam_kwallet5: Couldn't open file: /home/ freek/.local/share/kwalletd/kdewallet.salt because: 13-Permission denied nov 22 14:43:40 eiktum auth[11418]: pam_kwallet5-kwalletd: Couldn't create or read the salt file nov 22 14:43:40 eiktum auth[11418]: pam_kwallet5(dovecot:auth): pam_kwallet5: Fail into creating the hash These files have me as owner and group users. drwxr-xr-x is for folder /home/freek/.local/share -rw------- is for file /home/freek/.local/share/kwalletd/kdewallet.salt Looks like auth does get get the characteristics of my account. -- fr.gr. member openSUSE Freek de Kruijf -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 4

Re: [opensuse-factory] Rich Text button
by Ianseeks 23 Nov '17

23 Nov '17

************************SNIP******************* Did you really mean to post a reply to an email that was sent directly to you (in response to yours that was direct to me) to the list? As far as I am concerned, the points were noted and the subject was closed after my reply to you, i was not expecting it to keep running. -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] New Tumbleweed snapshot 20171122 released!
by Dominique Leuenberger 23 Nov '17

23 Nov '17

Please note that this mail was generated by a script. The described changes are computed based on the x86_64 DVD. The full online repo contains too many changes to be listed here. Please check the known defects of this snapshot before upgrading: https://openqa.opensuse.org/tests/overview?distri=opensuse&groupid=1&versio… When you reply to report some issues, make sure to change the subject. It is not helpful to keep the release announcement subject in a thread while discussing a specific problem. Packages changed: filesystem rpm tumbler (0.1.31 -> 0.2.0) yast2-drbd (3.1.26 -> 4.0.0) === Details === ==== filesystem ==== - Add /usr/share/fillup-templates: this is the new location for fillup-templates ==== rpm ==== Subpackages: rpm-build rpm-devel - Introduce new %_fillupdir macro for fillup-templates location - Set %_fillupdir macro to /usr/share/fillup-templates - Change fillup macros to support new %_fillupdir in addition to old /var/adm/fillup-templates location ==== tumbler ==== Version update (0.1.31 -> 0.2.0) Subpackages: libtumbler-1-0 tumbler-lang - add explicit libtumbler versioned dependency to tumbler - update to version 0.2.0 - Stable release of tumbler ported to GDbus - 0.1.92: - Add support for loading thumbnailers from *.thumbnailer files (enhancement bug bxo#7475) - 0.1.90: - Tumbler relies now on gdbus instead of dbus-glib - 0.1.32: - bxo#13618 avoid loading specialized tumbnailers twice on system with duplicate path entry in $XDG_DATA_HOME (causes assertion failure) - bxo#13360 don't close GdkPixbufLoader on error (causes sigabrt) - bxo#13240 fix typo in exif tag for image height ==== yast2-drbd ==== Version update (3.1.26 -> 4.0.0) - Merge fixes of bsc#1069131 and bsc#1069132 to openSUSE TW and SLE15. - Version 4.0.0 - bsc#1069131, compat udev-always-with-vnr and quorum. - bsc#1069132, fix error message when write resource conf to disk. - Version 3.3.0 -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0