June 2016 - openSUSE Factory - openSUSE Mailing Lists

[opensuse-factory] osc16 experiences
by Peter Czanik 28 Jun '16

28 Jun '16

Hi, Last week I was in Nürnberg for the openSUSE conference. It was a great experience: many interesting presentations (often difficult to choose where to go) and talking with many people about openSUSE, syslog-ng and ARM. Here is my blog about the conference: https://czanik.blogs.balabit.com/2016/06/leap-arm-ceph-and-more-opensuse-co… Thank you for organizing this event! Bye, CzP -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

Re: [opensuse-factory] Samba issues after snapshot 20160613
by Giuseppe Gorgoglione 27 Jun '16

27 Jun '16

I'm just amazed that this kind of thinkering with configuration parameters is even necessary when smbclient is used against localhost for testing purposes. I mean, being the client and the server coming from the same package, they should work each one against the other out-of-the-box, especially since "client ntlmv2 auth = yes" and "client use spnego = yes" are default settings. Thanks, Giuseppe. On Fri, Jun 24, 2016 at 4:25 PM, René Krell <renda.krell(a)gmail.com> wrote: > 2016-06-24 15:40 GMT+02:00 Giuseppe Gorgoglione <gorgogsp(a)gmail.com>: >> >> I tried to add that to my smb.conf file, but apparently that's not >> enough: it just made the smbclient error message to change from >> "protocol negotiation failed: NT_STATUS_IO_TIMEOUT" to "session setup >> failed "NT_STATUS_INVALID_PARAMETER". Then searching Samba 4.4.2 >> release notes [1] for the parameter you cited, I found that they >> introduced two new configuration defaults: >> >> "client ntlmv2 auth = yes" and "client use spnego = yes" >> >> So I reverted those, adding both "client ntlmv2 auth = no" and "client >> use spnego = no" to my smb.conf. >> This worked fine but I discovered to my utter surprise (ok, I'm not a >> Samba expert, and the "client" prefix to those parameters should have >> made me think better...) that they must be added to the client's >> smb.conf, not to the server's. > > Yes, of course. I forgot to mention. > For me, setting "client use spnego = no" in smb.conf at the client > side was enough, didn't need the second one. > There should be mentioned, that this might bring security issues in > environments with newer protocols, no extended security of the > protocol is used with this any longer. > Maybe some servers do also force extended security. > >> So now I'm able to access my Linux >> shares from another Linux box, but still not from Windows, which is my >> main use case. > > With the the above, I have access to all possible shares in the local > network around here. > I found mainly this response > Domain=[MY-DOMAIN] OS=[Windows 5.0] Server=[Windows 2000 LAN Manager] > For me, there does also work > smbclient -m NT1 -U domain_user //server/share > So, our shares unfortunately provide just the Samba 1 protocol. > >> Then, since those parameters are specific to the SMB1 protocol, I >> tried to force both the client and the server to use SMB2 or SMB3 as >> min protocol, but didn't worked. >> >> Any idea? > > Unfortunately not more. > This is a topic for Samba gurus. -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

3 4

[opensuse-factory] RFC - Proposed Revamp of software.opensuse.org
by Richard Brown 27 Jun '16

27 Jun '16

Hi all, In advance of Thursdays openSUSE Conference Workshop on the topic[1], I'd like to share with you all what I've been working on for replacing/improving software.opensuse.org My main goals have been to reduce the technical complexity of the current page (which often struggles under the heavy load of release days) while also doing a much better job of reflecting the offerings provided by the opensuse project and providing clearer help to users. You can see the current progress at https://software.opensuse.org/newsite/ The page is built using Jekyll, you can find the source at https://github.com/sysrich/new-software.o.o This email is a 'RFC' in two senses - not only am I keen to see Comments on the progress so far, but I would greatly appreciate Commits to improve what I have so far before this goes into production. The main thing that is desperately needed before I feel this new site is viable as a replacement for software.opensuse.org is a translation solution. I have been evaluating Polyglot [2] which seems to be a viable solution, but due to limited time and an inability to translate any other language, I would really like help getting it implemented. You may notice the absence of the software search (besides the link in the top right hand corner). This is intentional. Attendees to the openSUSE conference can see my talk on Saturday at 11:00 [3] to understand why I think we should be de-emphasising the software search, and in addition to my personal opinion I am hopeful that Thursdays workshop will open doors to other solutions to the problems with the current package search. Looking forward to what everyone things, happy hacking - Richard [1] https://events.opensuse.org/conference/oSC16/program/proposal/788 [2] https://untra.github.io/polyglot/ [3] https://events.opensuse.org/conference/oSC16/program/proposal/958 -- Richard Brown openSUSE Chairman Phone +4991174053-361 SUSE Linux GmbH, Maxfeldstr. 5, D-90409 Nuernberg GF: Felix Imendörffer, Jane Smithard, Graham Norton, HRB 21284 (AG Nürnberg) -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

27 50

[opensuse-factory] My opensuse conference report
by Josef Reidinger 27 Jun '16

27 Jun '16

Hi, last week I visit opensuse conference and I would like to share with others my report about it. It is influenced that I am part of YaST team, so there is my biggest interest. In general conference was well organized and well attented, thanks to everyone involved. There are a lot of talks about closing gap and more sharing between openSUSE and SLE. It does not affect too much YaST as we already have same code in SLE and openSUSE, but it will help us with easier handling of underlaying software. Visited also talk about reproducible builds[4]. Very interesting talk and I agree with a lot of stuff there, just for some decisions made I cannot agree. Like not having builtinfo as part of deb/rpm. Only problematic part is whole stuff checksum and it can be distributed as we have now as separate file. Will plan to look from record Bernards talk about this topic to see what is a plans in opensuse. Also see Flavio presentation about docker orchestrating and as usual for Flavio's talks I learn a lot of new stuff, I am not aware before. On friday was GSoC meeting with organizers, students and other mentors. Nice sharing of experience and ideas. In general I feel we do quite good job in GSoC. Daily status reports helps and also code reviews is nice way for students to learn something new, even they feel a bit strange at the beggining. Then there is some ARM presentation and especially UEFI grub2 on raspberry Pi by agraf is important for me to summarize how exactly arm people do this, so hopefully there will be less problems with arm in yast2-bootloader. This day was also discussion about yast directory structure, which report is send to yast2-devel. One interesting idea is to install src/lib directory to ruby vendor dir to make even more easier to use it from irb or cli. On friday is also good kde plasma porting to wayland talk. Interesting that biggest motivation and benefit is better testability and test coverage. So it is easier to kde people to avoid regressions and ensure that code works as they expected. I also discuss there with Christian Boltz future of yast2-apparmor and what API we can use for communication between yast and apparmor. It looks like in the end it will be json and we agreed that Christian send me patch or modified package, when there is something we can start with. I also met with Howard Guo and we discuss UI of yast2-auth-client. There is quite a lot of improvements, so I suggest everyone to try it on opensuse TW or in the latest beta of SP2. I also connect Howard with Martin Caj who use this module and plan to write new workstation setup using this module for doing setup. So Martin will try new module and provide feedback to Howard about its usability. On saturday there is good opening key note from Michael Miller and then there is quite controversial talk from Richard [3] against using Devel repos for users. I think in the end there is some disagreement, but it bring my attention to two ideas: 1) improve one click install - already done as part of GSoC, but for prototyping I will probably try some quick module in ruby to test few new approaches in this area 2) play a bit with dud and repository priorities, as I think if one click install add repos with low priority, it should avoid surprises when using zypper dup I also have two presentations on saturday. First one[1] was about Cheetah and was quite successfull. I convince few people to give it a try, so hopefully its user base will increase. The second one[2] about CFA was weaker. I was too much affected by scr pains, but audience not, so many benefits I present are not so strong arguments or not easy to understand. Next time I will talk more about nicer augeas api, boolean value wrapper and show simple examples of usage instead of yast2-bootloader code. On sunday there is a talk about open mainframe aliance[5] and one of results is that IBM would like to have opensuse for s390. After talk I talk with speaker if there is schedule for such enablement as it will probably need some cooperation with and help from yast team, but there is no schedule yet, so we will see when it comes. Hopefully it should not be so big pain, as in SLE we already have installer for s390, so probably just opensuse need some product tweaking. Final opensuse project meeting was interesting and for me the biggest impact is that we should more spread info about projects done under openSUSE umbrella as noone else will do it for us :) So thats all, thanks for reading it and hopefully see you next year on opensuse conference. Josef [1] https://youtu.be/W1BPKpsWNkI [2] https://youtu.be/O_aJdPsiIfs [3] https://youtu.be/lz3whk4E_IA [4] https://youtu.be/65eDYwNqW-I [5] https://youtu.be/T9miD9g2jlE -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 1

[opensuse-factory] could we set Leap 42.2 ppc64le iso as published ?
by Normand 27 Jun '16

27 Jun '16

Hello Adrian, I retrieved and did a guest install with the Leap 42.2 ppc64le iso from (1) Would it be possible to publish it on download server (2) ? I know this is an advanced version, but this would ease access for the few interested by this ppc64le port. (1) https://build.opensuse.org/package/binaries/openSUSE:Leap:42.2:Ports/_produ… === $osc getbinaries openSUSE:Leap:42.2:Ports/_product:openSUSE-dvd5-dvd-ppc64le/images_ppc/local === (2) http://download.opensuse.org/ports/ppc/distribution/leap/ -- Michel Normand -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 4

Re: [opensuse-factory] making a cohesive python LATEST available
by Jason Newton 27 Jun '16

27 Jun '16

adding some explicit maintainers to those projects (pulled from OBS pages). Sorry for the repost - toggled off plain text. I noticed devel:languages:python3 and it seems to depend on devel:languages:python:Factory which I guess in theory provides the mentioned functionality but I don't think this is clean enough. In particular I don't have expectation Factory repositories of any sort as a stable branch. So - can the maintainers of these projects create a stable cohesive variety? If you want to internally link the python package from Factory, be my guest - but the expectation is something like latest for the kernel or Qt (due to all the dependency packages). Offering the latest stable build of python with all related (and c-based) packages is important to any distribution/windows IMHO. If I've missed something here, please let me know - I only stumbled onto the python3 side project by accident - I didn't see it written anywhere. -Jason On Fri, Jun 24, 2016 at 3:41 AM, Dave Plater <dplater.list(a)gmail.com> wrote: > > > On 24/06/2016 02:58, Jason Newton wrote: >> >> Hi, >> >> >> I noticed a great reason to use python 3.5 today - PEP 465 - A >> >> dedicated infix operator for matrix multiplication. This takes a >> >> great deal of pain out of numeric programming with python and this is >> >> the first series having it. >> >> >> But I was surprised to see there seems no way short of tumbleweed / >> >> devel:languages:python:Factory to use it. Is it such a beast to allow >> >> devel:languages:python to support it? Like with KDE, can we have a >> >> devel:languages:python:latest fork that rebuilds all things for 3.5? >> >> Keep in mind 3.5 series has been available since last September with >> >> the last release in start of December! >> >> >> -Jason > > +1 I need python 3.5 in Leap:42.2 for a blender update, blender since 2.77 no longer builds against python 3.4 > > > Dave P > > -- > > To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org > > To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org > -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] ffmpeg 3 needs to be released to Factory
by Dave Plater 26 Jun '16

26 Jun '16

We've had ffmpeg 3 in multimedia:libs for quite a while, it now stands at 3.0.2 because a lot of packages depend on it and we didn't want to break their builds. I've made a subproject home:plater:ffmpeg and linked all the factory packages from : osc whatdependson openSUSE:Factory ffmpeg standard x86_64 and there are only : audaspace (I've filed a bug upstream, the package is for blender 2.8x when it's released) , k3b , openmcu , qutim and xine-lib that fail and I suspect that xine-lib is a gcc6 error. It looks like all the multimedia, with the exception of xine-lib, packages build now. Can the maintainers please look at their packages, maybe they just need to be updated. Best regards Dave P -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 2

[opensuse-factory] Authentication requested when switching from tty to GUI
by Chan Ju Ping 26 Jun '16

26 Jun '16

On my desktop, I am getting this authentication request whenever I switch from tty back to my GUI session: "Authentication is required to access the PC/SC daemon" It doesn't happen on my laptop running TW, but this is the case for my desktop. What is going on here?

2 11

[opensuse-factory] strange behavior if vlc
by Kai Straube 25 Jun '16

25 Jun '16

Hi there, since some weeks the vlc-player in tumbleweed don't work properly. The video-playback starts normal, but after some minutes it get slower, there are many Harddisk activity, the whole system becomes slower and don't react anymore. It seems like a memory leak. Only rebooting helps. Is there anybody who have the same experiences or some help. It's the same with vlc 2.4 and 3.0 unstable. Sincerly, Kai Gesendet mit AquaMail für Android http://www.aqua-mail.com -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] Tumbleweed 20160623 - Audacity broken
by S. 25 Jun '16

25 Jun '16

``````````````` ~> audacity Fatal Error: Mismatch between the program and library build versions detected. The library used 2.8 (no debug,Unicode,compiler with C++ ABI 1009,STL containers,compatible with 2.6), and your program used 2.8 (no debug,Unicode,compiler with C++ ABI 1010,STL containers,compatible with 2.6). Aborted (core dumped) ``````````````` This occurs both with the Packman version and with the Tumbleweed OSS current versions. I tried downgrading to the Leap version, but it also fails: `````````````` ~> audacity audacity: Symbol `_ZN12wxTextBuffer6ms_eofE' has different size in shared object, consider re-linking audacity: Symbol `wxTopLevelWindows' has different size in shared object, consider re-linking Fatal Error: Mismatch between the program and library build versions detected. The library used 2.8 (no debug,Unicode,compiler with C++ ABI 1009,STL containers,compatible with 2.6), and your program used 2.8 (no debug,Unicode,compiler with C++ ABI 1002,STL containers,compatible with 2.6). Aborted (core dumped) `````````````` -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

5 6