March 2016 - openSUSE Factory - openSUSE Mailing Lists

[opensuse-factory] Plasma 5 incompatible with *-nvidiaG04-* packages (13.2)
by André Verwijs 21 Mar '16

21 Mar '16

Plasma 5 incompatible..!!! with 13.2 packages: x11-video-nvidiaG04, nvidia-glG04, nvidia-computeG04, nvidia-gfxG04-kmp-desktop, nvidia-uvm-gfxG04-kmp-desktop for Leap/tumbleweed we need updated packages or alternative packages..!! see bugreport #360376 https://bugs.kde.org/show_bug.cgi?id=360376 Bug #353520 is a Fedora bug so has nothing to do with Opensuse.... other (opensuse) users with same problem, please add logfiles/backtraces thank you... André -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 1

[opensuse-factory] Many empty directories in /usr/lib and /usr/lib64 and RPM SPEC failures
by Bjoern Voigt 21 Mar '16

21 Mar '16

One of my openSUSE boxes runs since 2010 and has seen all openSUSE distributions in the time frame, now it runs with Tumbleweed. After upgrading to newer distribution versions (e.g. openSUSE 13.1, 13.2, Leap 42.1) I always look for old packages, especially libraries which can be purged according to section "After the upgrade" in this HOWTO: https://en.opensuse.org/SDB:Offline_upgrade Anyway, some trash can't be deleted. One concrete example. Pulseaudio uses the directory /usr/lib64/pulse-8.0 for it's modules: # ls /usr/lib64/pulse-8.0/modules libalsa-util.so module-device-restore.so module-remap-sink.so libavahi-wrap.so module-echo-cancel.so module-remap-source.so [...] But the following empty directories are also there from older already removed/upgraded Pulseaudio versions: # ls -1d /usr/lib64/pulse-[0-7]*/modules /usr/lib64/pulse-0.9.21/modules /usr/lib64/pulse-0.9.22/modules /usr/lib64/pulse-1.1/modules /usr/lib64/pulse-3.0/modules /usr/lib64/pulse-4.0/modules /usr/lib64/pulse-5.0/modules /usr/lib64/pulse-7.0/modules Of course I can delete them with "rmdir". But this is not the point. My box has 286 empty directories in /usr/lib64 (184 of them not owned by an RPM package) and 477 empty directories in /usr/lib (411 of them not owned by an RPM package). If you want to scan your openSUSE system: # find /usr/lib -type d -empty | wc -l # rpm -qf $(find /usr/lib -type d -empty)|grep "not owned"|wc -l I am relatively sure, that most of the old empty directories are caused by removed/upgraded old RPM packages with missing "%dir" options for some directories. But what is a good strategy here? I can manually check and delete the empty directories. And I can write a bug report for every single RPM package with missing "%dir" options. But this would be time-consuming. I would prefer an automatic RPM check in build service for this. Is there something or something planned? Greetings, Björn -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

5 7

[opensuse-factory] Texlive 2015 update: conflicts
by Bernhard Voelker 21 Mar '16

21 Mar '16

Hi *, I guess "yes" is the right one here? $ grep PRETTY /etc/os-release PRETTY_NAME="openSUSE Tumbleweed (20160307) (x86_64)" $ zypper up ... Detected 5 file conflicts: File /usr/bin/mag from install of texlive-ps2pk-bin-2015.20150521.svn36790-30.2.x86_64 (Main Repository (OSS)) conflicts with file from package texlive-ps2pkm-bin-2014.20140525.svn33479-29.8.x86_64 (@System) File /usr/bin/pfb2pfa from install of texlive-ps2pk-bin-2015.20150521.svn36790-30.2.x86_64 (Main Repository (OSS)) conflicts with file from package texlive-ps2pkm-bin-2014.20140525.svn33479-29.8.x86_64 (@System) File /usr/bin/pk2bm from install of texlive-ps2pk-bin-2015.20150521.svn36790-30.2.x86_64 (Main Repository (OSS)) conflicts with file from package texlive-ps2pkm-bin-2014.20140525.svn33479-29.8.x86_64 (@System) File /usr/bin/ps2pk from install of texlive-ps2pk-bin-2015.20150521.svn36790-30.2.x86_64 (Main Repository (OSS)) conflicts with file from package texlive-ps2pkm-bin-2014.20140525.svn33479-29.8.x86_64 (@System) File /usr/share/man/man1/ps2pk.1.gz from install of texlive-ps2pk-2015.104.svn37078-20.1.noarch (Main Repository (OSS)) conflicts with file from package texlive-ps2pkm-2014.100.1.6_beta_1svn33818-19.4.noarch (@System) File conflicts happen when two packages attempt to install files with the same name but different contents. If you continue, conflicting files will be replaced losing the previous content. Continue? [yes/no] (no): Have a nice day, Berny -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 2

[opensuse-factory] New Tumbleweed snapshot 20160320 released!
by Ludwig Nussel 21 Mar '16

21 Mar '16

Please note that this mail was generated by a script. The described changes are computed based on the x86_64 DVD. The full online repo contains too many changes to be listed here. Please check the known defects of this snapshot before upgrading: https://openqa.opensuse.org/tests/overview?distri=opensuse&groupid=1&versio… Packages changed: MozillaThunderbird (38.6.0 -> 38.7.0) farstream (0.2.7 -> 0.2.8) imlib2 (1.4.7 -> 1.4.8) ldb perl-Bootloader (0.907 -> 0.908) talloc (2.1.5 -> 2.1.6) tevent yast2-users (3.1.45 -> 3.1.46) yast2-vm (3.1.24 -> 3.1.25) === Details === ==== MozillaThunderbird ==== Version update (38.6.0 -> 38.7.0) Subpackages: MozillaThunderbird-translations-common - update to Thunderbird 38.7.0 (boo#969894) * MFSA 2015-81/CVE-2015-4477 (bmo#1179484) Use-after-free in MediaStream playback * MFSA 2015-136/CVE-2015-7207 (bmo#1185256) Same-origin policy violation using performance.getEntries and history navigation * MFSA 2016-16/CVE-2016-1952 Miscellaneous memory safety hazards * MFSA 2016-17/CVE-2016-1954 (bmo#1243178) Local file overwriting and potential privilege escalation through CSP reports * MFSA 2016-20/CVE-2016-1957 (bmo#1227052) Memory leak in libstagefright when deleting an array during MP4 processing * MFSA 2016-21/CVE-2016-1958 (bmo#1228754) Displayed page address can be overridden * MFSA 2016-23/CVE-2016-1960/ZDI-CAN-3545 (bmo#1246014) Use-after-free in HTML5 string parser * MFSA 2016-24/CVE-2016-1961/ZDI-CAN-3574 (bmo#1249377) Use-after-free in SetBody * MFSA 2016-25/CVE-2016-1962 (bmo#1240760) Use-after-free when using multiple WebRTC data channels * MFSA 2016-27/CVE-2016-1964 (bmo#1243335) Use-after-free during XML transformations * MFSA 2016-28/CVE-2016-1965 (bmo#1245264) Addressbar spoofing though history navigation and Location protocol property * MFSA 2016-31/CVE-2016-1966 (bmo#1246054) Memory corruption with malicious NPAPI plugin * MFSA 2016-34/CVE-2016-1974 (bmo#1228103) Out-of-bounds read in HTML parser following a failed allocation * MFSA 2016-37/CVE-2016-1977/CVE-2016-2790/CVE-2016-2791/ CVE-2016-2792/CVE-2016-2793/CVE-2016-2794/CVE-2016-2795/ CVE-2016-2796/CVE-2016-2797/CVE-2016-2798/CVE-2016-2799/ CVE-2016-2800/CVE-2016-2801/CVE-2016-2802 Font vulnerabilities in the Graphite 2 library ==== farstream ==== Version update (0.2.7 -> 0.2.8) Subpackages: farstream-data gstreamer-plugins-farstream libfarstream-0_2-5 - Update to version 0.2.8: + Add "require-encryption" parameter to ignore unencrypted packets. + Enable building static GStreamer and transmitter plugins. + Make OPUS plugin work and select it as default codec. + Bug fixes. ==== imlib2 ==== Version update (1.4.7 -> 1.4.8) - Spec cleaner run - Update to 1.4.8 * Add a Farbfeld loader (FRIGN). * Fix zlib and bz2 loader filename check. * Miscellaneous maintenance. ==== ldb ==== Subpackages: libldb1 libldb1-32bit - Require talloc 2.1.6 at build-time; (bsc#954658). ==== perl-Bootloader ==== Version update (0.907 -> 0.908) Subpackages: perl-Bootloader-YAML - Skip grub2-install on PowerNV - 0.908 ==== talloc ==== Version update (2.1.5 -> 2.1.6) Subpackages: libtalloc2 libtalloc2-32bit python-talloc python-talloc-32bit - Update to 2.1.6; (bsc#954658). + pytalloc: Add new BaseObject + pytalloc: add a _pytalloc_get_type() helper function and generate PyExc_TypeError on mismatch + talloc: add _pytalloc_get_ptr/_pytalloc_get_mem_ctx helper functions + Improve testsuite by avoiding path issues + Only set public headers field when installing as a public library + Fix a documentation typo ==== tevent ==== Subpackages: libtevent0 libtevent0-32bit - Require talloc 2.1.6 at build-time; (bsc#954658). ==== yast2-users ==== Version update (3.1.45 -> 3.1.46) - Do not include inst-sys users when cloning the configuration after the installation (bnc#965852) - 3.1.46 ==== yast2-vm ==== Version update (3.1.24 -> 3.1.25) - bsc#971054 - virtlogd is now required by libvirt and must be started automatically - 3.1.25 -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] chromium spam in journal
by Bruno Friedmann 20 Mar '16

20 Mar '16

Am I the only one to see thousand of lines like this when using chromium Mar 20 17:56:00 qt-kt.labaroche.ioda.net kernel: audit: type=1326 audit(1458492960.485:257): auid=1502 uid=1502 gid=1500 ses=1 pid=6220 comm="chromium" exe="/usr/lib64/chromium/chromium" sig=0 arch=c000003e syscall=273 compat=0 ip=0x7f04d0cdd3f4 code=0x50000 Mar 20 17:56:00 qt-kt.labaroche.ioda.net audit[6221]: SECCOMP auid=1502 uid=1502 gid=1500 ses=1 pid=6221 comm="chromium" exe="/usr/lib64/chromium/chromium" sig=0 arch=c000003e syscall=273 compat=0 ip=0x7f04d0cdd3f4 code=0x50000 the last line is repeated 4x the block is repeating for each browsing action in chromium If it's somewhat nice to see what's happening on a system, I'm qualifying this as (kill my ssd with stupid log entry :-) I know that normally systemd-journald/logger will try to pick all event. But I don't know where to disable such level of log Why should I have audit message when I deliberate turn audit off ? systemctl status auditd.service ● auditd.service - Security Auditing Service Loaded: loaded (/usr/lib/systemd/system/auditd.service; disabled; vendor preset: enabled) Active: inactive (dead) What didn't I understand, or its a mixed bug? Thanks for any suggestions. -- Bruno Friedmann Ioda-Net Sàrl www.ioda-net.ch openSUSE Member, fsfe fellowship GPG KEY : D5C9B751C4653227 irc: tigerfoot -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 2

[opensuse-factory] New Tumbleweed snapshot 20160318 released!
by Ludwig Nussel 20 Mar '16

20 Mar '16

Please note that this mail was generated by a script. The described changes are computed based on the x86_64 DVD. The full online repo contains too many changes to be listed here. Please check the known defects of this snapshot before upgrading: https://openqa.opensuse.org/tests/overview?distri=opensuse&groupid=1&versio… Packages changed: Mesa babl (0.1.14 -> 0.1.16) bind (9.10.3P3 -> 9.10.3P4) bundle-lang-common bundle-lang-gnome bundle-lang-kde emacs kiwi (7.03.59 -> 7.03.64) libqt5-qtbase libreoffice (5.1.0.3 -> 5.1.1.3) llvm mercurial (3.7.1 -> 3.7.2) nano (2.5.2 -> 2.5.3) ntp (4.2.8p4 -> 4.2.8p6) p7zip (15.09 -> 15.14) pcsc-cyberjack (3.99.5final.SP08 -> 3.99.5final.SP09) perl-IO-Socket-SSL (2.016 -> 2.024) perl-XML-XPath (1.33 -> 1.34) python-Pillow python-cryptography simple-scan (3.18.2 -> 3.19.91) tango-icon-theme udisks2 (2.1.6 -> 2.1.7) videoproto (2.3.1 -> 2.3.3) vim (7.4.1525 -> 7.4.1558) yast2 (3.1.177 -> 3.1.179) yast2-bootloader (3.1.163 -> 3.1.164) yast2-installation (3.1.172 -> 3.1.175) yast2-mail (3.1.6 -> 3.1.7) yast2-security (3.2.1 -> 3.2.2) yast2-update (3.1.36 -> 3.1.37) === Details === ==== Mesa ==== Subpackages: Mesa-32bit Mesa-devel Mesa-dri-devel Mesa-libEGL-devel Mesa-libEGL1 Mesa-libEGL1-32bit Mesa-libGL-devel Mesa-libGL1 Mesa-libGL1-32bit Mesa-libGLESv1_CM-devel Mesa-libGLESv1_CM1 Mesa-libGLESv2-2 Mesa-libGLESv2-devel Mesa-libglapi-devel Mesa-libglapi0 Mesa-libglapi0-32bit Mesa-libva libOSMesa-devel libOSMesa9 libOSMesa9-32bit libgbm-devel libgbm1 libgbm1-32bit libvdpau_nouveau libvdpau_r300 libvdpau_r600 libvdpau_radeonsi libwayland-egl-devel libwayland-egl1 libxatracker2 - n_Define-GLAPIVAR-separate-from-GLAPI.patch: Add separate definition GLAPIVAR as GLAPI doesn't have the an 'extern' for some compiler versions. This is needed for GLw (bsc#970725). - U_llvmpipe-Do-not-use-barriers-if-not-using-threads.patch * llvmpipe: Do not use barriers if not using threads; triggers on single cpu machines (like KVM in openQA) with gcc6 and latest glibc(bnc#971350) - enable llvmpipe for aarch64 (fate#320649) ==== babl ==== Version update (0.1.14 -> 0.1.16) - Update to version 0.1.16: + Improvements to half float reference, SIMD, and fast-paths, and CIE float fast paths; cleanups of fast path extensions. ==== bind ==== Version update (9.10.3P3 -> 9.10.3P4) Subpackages: bind-chrootenv bind-doc bind-utils idnkit libbind9-140 libdns162 libidnkit1 libirs141 libisc160 libisccc140 libisccfg140 liblwres141 - Security update 9.10.3-P3: * CVE-2016-1285, bsc#970072: assert failure on input parsing can cause premature exit. * CVE-2016-1286, bsc#970073: An error when parsing signature records for DNAME can lead to named exiting due to an assertion failure. * CVE-2016-2088, bsc#970074: a deliberately misconstructed packet containing multiple cookie options to cause named to terminate with an assertion failure. ==== bundle-lang-common ==== Subpackages: bundle-lang-common-cs bundle-lang-common-da bundle-lang-common-de bundle-lang-common-el bundle-lang-common-en bundle-lang-common-es bundle-lang-common-fr bundle-lang-common-hu bundle-lang-common-it bundle-lang-common-ja bundle-lang-common-pl bundle-lang-common-pt bundle-lang-common-ru bundle-lang-common-zh - Update package list. ==== bundle-lang-gnome ==== Subpackages: bundle-lang-gnome-cs bundle-lang-gnome-da bundle-lang-gnome-de bundle-lang-gnome-el bundle-lang-gnome-en bundle-lang-gnome-es bundle-lang-gnome-fr bundle-lang-gnome-hu bundle-lang-gnome-it bundle-lang-gnome-ja bundle-lang-gnome-pl bundle-lang-gnome-pt bundle-lang-gnome-ru bundle-lang-gnome-zh - Update package list. ==== bundle-lang-kde ==== Subpackages: bundle-lang-kde-cs bundle-lang-kde-da bundle-lang-kde-de bundle-lang-kde-el bundle-lang-kde-en bundle-lang-kde-es bundle-lang-kde-fr bundle-lang-kde-hu bundle-lang-kde-it bundle-lang-kde-ja bundle-lang-kde-pl bundle-lang-kde-pt bundle-lang-kde-ru bundle-lang-kde-zh - Update package list. ==== emacs ==== Subpackages: emacs-info emacs-nox emacs-x11 etags - Add patch debbugs16737.patch due user request from Arun Persaud to avoid hangs for several seconds or 10s of seconds in case of pasting large amount of text http://debbugs.gnu.org/cgi/bugreport.cgi?bug=16737#185 ==== kiwi ==== Version update (7.03.59 -> 7.03.64) Subpackages: kiwi-desc-isoboot kiwi-desc-netboot kiwi-desc-oemboot kiwi-desc-vmxboot kiwi-doc kiwi-media-requires kiwi-pxeboot kiwi-templates kiwi-tools - v7.03.64 released - Revert "Added pv kernel profile" There is no kernel-pv This reverts commit 8ca75eeee4bd7999a20ed050d9ebe4ba75607c5d. - v7.03.63 released - Use shim-install to setup EFI secure boot This fixes (bnc#968475) - Added pv kernel profile - rpm: require tar>=1.2.7 for --xattrs support tar 1.2.6 and earlier doesn't have support for the --xattrs options (which is necessary in order to build valid Docker image root filesystems). Signed-off-by: Aleksa Sarai <asarai(a)suse.com> - travis: install newest version of GNU tar from trusty source --xattrs support was added quite some time ago, but Travis doesn't seem to have a recent enough version of GNU tar. Realistically, most up-to-date systems do, so we can just install the latest version here. In order to install the latest version, we have to build it from the Ubuntu 14.04 source repo. Signed-off-by: Aleksa Sarai <asarai(a)suse.com> - modules: KIWIContainerBuilder: preserve xattrs tar doesn't preserve extended attributes by default, causing Docker images to not have any correct set-capabilities bits set on binaries such as ping. Fix this by adding the --xattrs flag to the tar command run to generate the root filesystem image. Signed-off-by: Aleksa Sarai <asarai(a)suse.com> - v7.03.62 released - v7.03.61 released - Fixed gce disk format The order of the files in the tarball is important. The first entry must be the manifest.json followed by disk.raw. In addition the style of the manifest.json has been adapted too. A space after colon seems to be required for gce to accept the data ==== libqt5-qtbase ==== Subpackages: libQt5Concurrent-devel libQt5Concurrent5 libQt5Core-devel libQt5Core-private-headers-devel libQt5Core5 libQt5DBus-devel libQt5DBus5 libQt5Gui-devel libQt5Gui-private-headers-devel libQt5Gui5 libQt5Network-devel libQt5Network5 libQt5OpenGL-devel libQt5OpenGL5 libQt5PlatformHeaders-devel libQt5PrintSupport-devel libQt5PrintSupport5 libQt5Sql-devel libQt5Sql5 libQt5Sql5-mysql libQt5Sql5-postgresql libQt5Sql5-sqlite libQt5Sql5-unixODBC libQt5Test-devel libQt5Test5 libQt5Widgets-devel libQt5Widgets5 libQt5Xml-devel libQt5Xml5 libqt5-qtbase-common-devel libqt5-qtbase-devel libqt5-qtbase-doc - Merge libqt5-qtbase-platformtheme-gtk2 back into libQt5Gui5 (bsc#969935) * align with old libQt5Gui5 where libqgtk2.so has provided ==== libreoffice ==== Version update (5.1.0.3 -> 5.1.1.3) Subpackages: libreoffice-base libreoffice-base-drivers-mysql libreoffice-branding-upstream libreoffice-calc libreoffice-calc-extensions libreoffice-draw libreoffice-filters-optional libreoffice-gnome libreoffice-icon-theme-breeze libreoffice-icon-theme-galaxy libreoffice-icon-theme-hicontrast libreoffice-icon-theme-oxygen libreoffice-icon-theme-sifr libreoffice-icon-theme-tango libreoffice-impress libreoffice-kde4 libreoffice-l10n-cs libreoffice-l10n-da libreoffice-l10n-de libreoffice-l10n-el libreoffice-l10n-en libreoffice-l10n-es libreoffice-l10n-fr libreoffice-l10n-hu libreoffice-l10n-it libreoffice-l10n-ja libreoffice-l10n-pl libreoffice-l10n-ru libreoffice-mailmerge libreoffice-math libreoffice-pyuno libreoffice-writer libreoffice-writer-extensions - Add patch to detect boost_filesystem headers: * 0002-boost-filesystem1.patch * 0003-boost-filesystem2.patch - Add patch to fix rounding bug in test on i586: * libreoffice-hotfix-disablebrokenshapetest.patch - Version update to 5.1.1.3: * Various bugfixes for the first bugfix release of 5.1 - Update patch to build on sle11 * 0001-liborcus-0.11.patch ==== llvm ==== Subpackages: libLLVM libLLVM-32bit - Use gcc for stage1 bootstrap - Add back libstdc++-devel dependency for clang since libc++ is only available for x86-64 atm. ==== mercurial ==== Version update (3.7.1 -> 3.7.2) Subpackages: mercurial-lang - update to v3.7.2 This is a regularly-scheduled bugfix release. + bundlerepo: properly handle hidden linkrev in filelog (issue4945) + bundlerepo: properly handle hidden linkrev in manifestlog (issue4945) + demandimport: add _imp to ignore list + doc: correct example concerning "hg purge" alias in man page "hgrc.5" + doc: remove deprecated option from synopsis of command help + fileset: fix copy/paste in eol() error message + help: fix typo in backgroundclose documentation + help: hg.intevation.de is new primary name of hg.intevation.de (and new cert) + help: update template examples to use reST literal syntax + hg: obtain lock when creating share from pooled repo (issue5104) + log: fix order of revisions filtered by multiple OR options (issue5100) + rebase: update working directory when aborting (issue5084) + revert: properly revert to ancestor of p2 during merge (issue5052) + revset: flatten chained 'list' operations (aka function args) (issue5072) + setup: avoid procedure related to hg.exe at setup.py --pure + ui: fix crash by non-interactive prompt echo for user name + unionrepo: properly handle hidden linkrev in revlog (issue5070) + zeroconf: forward all arguments passed to ui.configitems() wrapper ==== nano ==== Version update (2.5.2 -> 2.5.3) Subpackages: nano-lang - Update to 2.5.3 * several bugfixes fostray cursor positioning errors, many many memory leaks including file reading, using the file browser, searching for multi-byte characters, history completion, and many other places. * New features include the ability to trim whitespace from the ends of lines when justifying text, see nanorc(5) option justifytrim for deets. ==== ntp ==== Version update (4.2.8p4 -> 4.2.8p6) Subpackages: ntp-doc - CVE-2015-8158, bsc#962966: potential infinite loop in ntpq - CVE-2015-8138, bsc#963002: Zero Origin Timestamp Bypass - CVE-2015-7978, bsc#963000: Stack exhaustion in recursive traversal of restriction list. - CVE-2015-7979, bsc#962784: off-path denial of service on authenticated broadcast mode - CVE-2015-7977, bsc#962970: restriction list NULL pointer dereference - CVE-2015-7976, bsc#962802: 'ntpq saveconfig' command allows dangerous characters in filenames - CVE-2015-7975, bsc#962988: nextvar() missing length check in ntpq - CVE-2015-7974, bsc#962960: Missing key check allows impersonation between authenticated peers - CVE-2015-7973, bsc#962995: replay attack on authenticated broadcast mode - CVE-2015-5300, bsc#951629: MITM attacker can force ntpd to make a step larger than the panic threshold - update to 4.2.8p6 * fixes low- and medium-severity vulnerabilities 4.2.8p6: CVE-2015-8158 CVE-2015-8138 CVE-2015-7978 CVE-2015-7979 CVE-2015-7977 CVE-2015-7976 CVE-2015-7975 CVE-2015-7974 CVE-2015-7973 4.2.8p5: CVE-2015-5300 * bug fixes ==== p7zip ==== Version update (15.09 -> 15.14) - Update to version 15.14 * Based on 7-zip 15.14 release * Build fixes * All the fixes from 7-zip 15.14, see the included ChangeLog - Drop p7zip-CVE-2015-1038.patch, upstream. ==== pcsc-cyberjack ==== Version update (3.99.5final.SP08 -> 3.99.5final.SP09) - update to 3.99.5 Service Pack 09 * Fix USB unplug problems * removed cyberjack diag tool ==== perl-IO-Socket-SSL ==== Version update (2.016 -> 2.024) - updated to 2.024 see /usr/share/doc/packages/perl-IO-Socket-SSL/Changes 2.024 2016/02/06 - Work around issue where the connect fails on systems having only a loopback interface and where IO::Socket::IP is used as super class (default when available). Since IO::Socket::IP sets AI_ADDRCONFIG by default connect to localhost would fail on this systems. This happened at least for the tests, see https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=813796 Workaround is to explicitely set GetAddrInfoFlags to 0 if no GetAddrInfoFlags is set but the Family/Domain is given. In this case AI_ADDRCONFIG would not be useful anyway but would cause at most harm. 2.023 2016/01/30 - OpenSSL 1.0.2f changed the behavior of SSL shutdown in case the TLS connection was not fully established (commit: f73c737c7ac908c5d6407c419769123392a3b0a9). This somehow resulted in Net::SSLeay::shutdown returning 0 (i.e. keep trying) which caused an endless loop. It will now ignore this result in case the TLS connection was not yet established and consider the TLS connection closed instead. 2.022 2015/12/10 - fix stringification of IPv6 inside subjectAltNames in Utils::CERT_asHash. Thanks to Mark.Martinec[AT]ijs[DOT]si for reporting in #110253 2.021 2015/12/02 - Fixes for documentation and typos thanks to DavsX and jwilk. - Update PublicSuffx with latest version from publicsuffix.org 2.020 2015/09/20 - support multiple directories in SSL_ca_path as proposed in RT#106711 by dr1027[AT]evocat[DOT]ne. Directories can be given as array or as string with a path separator, see documentation. - typos fixed thanks to jwilk https://github.com/noxxi/p5-io-socket-ssl/pull/34 2.019 2015/09/01 - work around different behavior of getnameinfo from Socket and Socket6 by using a different wrapper depending on which module I use for IPv6. Thanks to bluhm for reporting. 2.018 2015/08/27 - RT#106687 - startssl.t failed on darwin with old openssl since server requested client certificate but offered also anon ciphers 2.017 2015/08/24 - checks for readability of files/dirs for certificates and CA no longer use - r because this is not safe when ACLs are used. Thanks to BBYRD, RT#106295 - new method sock_certificate similar to peer_certificate based on idea of Paul Evans, RT#105733 - get_fingerprint can now take optional certificate as argument and compute the fingerprint of it. Useful in connection with sock_certificate. - check for both EWOULDBLOCK and EAGAIN since these codes are different on some platforms. Thanks to Andy Grundman, RT#106573 - enforce default verification scheme if none was specified, i.e. no longer just warn but accept. If really no verification is wanted a scheme of 'none' must be explicitly specified. - support different cipher suites per SNI hosts - remove perl-IO-Socket-SSL_fix_offline.patch ==== perl-XML-XPath ==== Version update (1.33 -> 1.34) - updated to 1.34 see /usr/share/doc/packages/perl-XML-XPath/Changes 1.34 2016-03-08 MANWAR - Applied the patch to script examples/xpath (kindly provided by GREGOA). ==== python-Pillow ==== Subpackages: python-Pillow-tk - add LICENSE ==== python-cryptography ==== - fix license ==== simple-scan ==== Version update (3.18.2 -> 3.19.91) - Update to version 3.19.91: + Updated translations. - Update to version 3.19.90: + Updated translations. - Update to version 3.19.4: + Updated translations. - Update to version 3.19.3:a + Fix typo in Epson website. + Updated translations. - Update to version 3.19.2: + Make colord/packagekit support able to be explicitly disabled. - Update to version 3.19.1: + Add help about quality, brightness, contrast settings. + Fix help references to Wikipedia (currently just say Wiki). + Fix SANE capability logging commas. ==== tango-icon-theme ==== - Add tango-icon-theme-reproducible.patch to fix build-compare (fdo#94510). ==== udisks2 ==== Version update (2.1.6 -> 2.1.7) Subpackages: libudisks2-0 - Update to 2.1.7: + Allow disabling ACL. + udisksctl: Properly redirect stdout. + Catch bogus UUID changes of MDRAIDs. + Fix udiskctl help for glib 2.45. + udisks2.service.in: Add [Install] section. + Fix translator comments in udisksobjectinfo.c. + integration-test: Explicitly require UDisks 2.0 typelib. + integration-test: Fix wait_timeout/busy error messages. + integration-test: PEP-8 fixes. + integration-test: Fix Polkit.test_removable_fs. + test_polkitd.py: Fix race condition in waiting for test polkitd. + integration-test: Fix race condition in fake CD drive creation. + integration-test: Add timeout to readd_device(). + Add support for read look-ahead ATA settings (fdo#92488). - Add tarball signing. - Change group to System/Daemons. ==== videoproto ==== Version update (2.3.1 -> 2.3.3) - Update to version 2.3.3: No functional change, just squashing a build warning for new xserver. ==== vim ==== Version update (7.4.1525 -> 7.4.1558) Subpackages: gvim vim-data - Updated to revision 1558, fixes the following problems * Using "ever" for packages is confusing. * Specifying buffer number for channel not implemented yet. * MS-Windows job_start() closes wrong handle. * Compiler warning for unitinialized variable. * MS-Windows channel leaks file descriptor. * Using feedkeys() with an empty string disregards 'x' option. * Compiler warning for shadowed variable. * The feedkeys test has a one second delay. * Cannot re-use a channel for another job. * Too many feature flags for pipes, jobs and channels. * Selection with the mouse does not work in command line mode. * Too much code in eval.c. * Channel test is a bit flaky. * Missing job_info(). * job_start() with a list is not tested. * Channel log methods are not tested. * On Win32 escaping the command does not work properly. * GTK3: horizontal cursor movement in Visual selection not good. * Sticky type checking is more annoying than useful. * Getting a cterm highlight attribute that is not set results in the string "-1". * Two tests fail. * Cannot load packages early. * Cannot generate help tags in all doc directories. * ":colorscheme" does not use 'packpath'. * ":runtime" does not use 'packpath'. * Completion for :colorscheme does not use 'packpath'. * List of test targets incomplete. * "make install" changes the help tags file, causing it to differ from the repository. * Windows cannot be identified. * It is not easy to find out what windows display a buffer. ==== yast2 ==== Version update (3.1.177 -> 3.1.179) Subpackages: yast2-devel-doc - Added cfg_mail.scr from yast-mail to avoid circular dependencies with yast2-security, yast2-users and yast2-mail (FATE#319711) - 3.1.179 - Introduce PowerNV platform (boo#970582) - 3.1.178 ==== yast2-bootloader ==== Version update (3.1.163 -> 3.1.164) - include quiet in default kernel boot parameters for POWER (bsc#965347) - 3.1.164 ==== yast2-installation ==== Version update (3.1.172 -> 3.1.175) - Added automatic update during installation (FATE#319716) - 3.1.175 - System Role: align labels (FATE#317481). - System Role: pop-up if changing the role to a different one. - 3.1.174 - Moved Yast::Transfer::FileFromUrl here from yast2-update (FATE#319716). - 3.1.173 ==== yast2-mail ==== Version update (3.1.6 -> 3.1.7) - Moved cfg_mail.scr to yast2 due to circular dependencies with yast2-security and yast2-users. (FATE#319711) - 3.1.7 ==== yast2-security ==== Version update (3.2.1 -> 3.2.2) - Added support for multiple display managers (bnc#946889). - Replaced testsuite tests by rspec tests. - Removed autotools. - Updated yast2 dependency for cfg_mail.scr - 3.2.2 ==== yast2-update ==== Version update (3.1.36 -> 3.1.37) - Remove Yast::Transfer::FileFromUrl as it will be present in yast2-installation (FATE#319716). - 3.1.37 -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] Re: Plasma 5 incompatible with *-nvidiaG04-* packages (13.2)
by André Verwijs 19 Mar '16

19 Mar '16

update: packages work great with Leap :) why not with TW, not sure... -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

Re: [opensuse-factory] What's happening to Virtualbox guest addons?
by Ken Schneider 19 Mar '16

19 Mar '16

On 03/19/2016 06:37 AM, Howard Guo wrote: > Hi fellow tumbleweed users. > > After having upgraded to the latest snapshot, my tumbleweed virtual > machine again fails to light up display. According to system journal, > vboxadd service failed with error “/var/lib/VBoxGuestAditions/config not > found”, and it does not help to reinstall guest addon packages. > > Does anyone have a remedy? > > Kind regards, > > Howard > Run this as root: /usr/lib/virtualbox/vboxdrv.sh setup -- Ken linux since 1994 S.u.S.E./openSUSE since 1996 -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] What's happening to Virtualbox guest addons?
by Howard Guo 19 Mar '16

19 Mar '16

Hi fellow tumbleweed users. After having upgraded to the latest snapshot, my tumbleweed virtual machine again fails to light up display. According to system journal, vboxadd service failed with error “/var/lib/VBoxGuestAditions/config not found”, and it does not help to reinstall guest addon packages. Does anyone have a remedy? Kind regards, Howard

1 0

[opensuse-factory] New Tumbleweed snapshot 20160317 released!
by Ludwig Nussel 18 Mar '16

18 Mar '16

Please note that this mail was generated by a script. The described changes are computed based on the x86_64 DVD. The full online repo contains too many changes to be listed here. Please check the known defects of this snapshot before upgrading: https://openqa.opensuse.org/tests/overview?distri=opensuse&groupid=1&versio… Packages changed: MozillaFirefox (44.0.2 -> 45.0) a2ps alpine attica-qt5 (5.19.0 -> 5.20.0) autoyast2 (3.1.116 -> 3.1.118) baloo5 (5.19.0 -> 5.20.0) binutils blog (2.17 -> 2.18) bluez-qt (5.19.0 -> 5.20.0) breeze5-icons (5.19.0 -> 5.20.0) btrfsmaintenance (0.1.2 -> 0.2) btrfsprogs build (20151105 -> 20160304) busybox clamav (0.99 -> 0.99.1) cmake (3.4.3 -> 3.5.0) cpio cups (2.1.0 -> 2.1.3) cups-backends cups-filters (1.4.0 -> 1.8.2) ddd digikam dnsmasq drbd drbd-utils (8.9.5 -> 8.9.6) efivar (0.21 -> 0.23) emacs extra-cmake-modules (5.19.0 -> 5.20.0) fontconfig frameworkintegration (5.19.0 -> 5.20.0) fvwm2 gcolor2 gd git (2.7.2 -> 2.7.3) google-noto-fonts gpg2 (2.1.10 -> 2.1.11) gtk2 (2.24.29 -> 2.24.30) ibus-pinyin icewm installation-images-openSUSE (14.232 -> 14.235) karchive (5.19.0 -> 5.20.0) kauth (5.19.0 -> 5.20.0) kbookmarks (5.19.0 -> 5.20.0) kcmutils (5.19.0 -> 5.20.0) kcodecs (5.19.0 -> 5.20.0) kcompletion (5.19.0 -> 5.20.0) kconfig (5.19.0 -> 5.20.0) kconfigwidgets (5.19.0 -> 5.20.0) kcoreaddons (5.19.0 -> 5.20.0) kcrash (5.19.0 -> 5.20.0) kdbusaddons (5.19.0 -> 5.20.0) kdeclarative (5.19.0 -> 5.20.0) kded (5.19.0 -> 5.20.0) kdelibs4support (5.19.0 -> 5.20.0) kdesignerplugin (5.19.0 -> 5.20.0) kdesu (5.19.0 -> 5.20.0) kdewebkit (5.19.0 -> 5.20.0) kdnssd-framework (5.19.0 -> 5.20.0) kdoctools (5.19.0 -> 5.20.0) kemoticons (5.19.0 -> 5.20.0) kernel-source (4.4.3 -> 4.5.0) kfilemetadata5 (5.19.0 -> 5.20.0) kglobalaccel (5.19.0 -> 5.20.0) kguiaddons (5.19.0 -> 5.20.0) khtml (5.19.0 -> 5.20.0) ki18n (5.19.0 -> 5.20.0) kiconthemes (5.19.0 -> 5.20.0) kidletime (5.19.0 -> 5.20.0) kimageformats (5.19.0 -> 5.20.0) kinit (5.19.0 -> 5.20.0) kio (5.19.0 -> 5.20.0) kitemmodels (5.19.0 -> 5.20.0) kitemviews (5.19.0 -> 5.20.0) kjobwidgets (5.19.0 -> 5.20.0) kjs (5.19.0 -> 5.20.0) kjsembed (5.19.0 -> 5.20.0) kmediaplayer (5.19.0 -> 5.20.0) knewstuff (5.19.0 -> 5.20.0) knotifications (5.19.0 -> 5.20.0) knotifyconfig (5.19.0 -> 5.20.0) kpackage (5.19.0 -> 5.20.0) kparts (5.19.0 -> 5.20.0) kpeople5 (5.19.0 -> 5.20.0) kplotting (5.19.0 -> 5.20.0) kpty (5.19.0 -> 5.20.0) kross (5.19.0 -> 5.20.0) krunner (5.19.0 -> 5.20.0) kservice (5.19.0 -> 5.20.0) ktexteditor (5.19.0 -> 5.20.0) ktextwidgets (5.19.0 -> 5.20.0) kunitconversion (5.19.0 -> 5.20.0) kwallet (5.19.0 -> 5.20.0) kwidgetsaddons (5.19.0 -> 5.20.0) kwindowsystem (5.19.0 -> 5.20.0) kxmlgui (5.19.0 -> 5.20.0) kxmlrpcclient5 (5.19.0 -> 5.20.0) ldb libKF5ModemManagerQt (5.19.0 -> 5.20.0) libKF5NetworkManagerQt (5.19.0 -> 5.20.0) libcaca libdmapsharing (2.9.32 -> 2.9.34) libfastjson (0.99.0 -> 0.99.2) libinput (1.2.0 -> 1.2.1) libjpeg-turbo (1.4.0 -> 1.4.2) libjpeg62-turbo liborcus (0.9.2 -> 0.11.0) libpsl (0.12.0 -> 0.13.0) libreoffice libsrtp (1.5.3 -> 1.5.4) libstorage (2.25.35 -> 2.25.36) libvirt-python (1.3.1 -> 1.3.2) llvm (3.7.0 -> 3.8.0) lvm2 mc (4.8.15 -> 4.8.16) mediastreamer2 (2.12.0 -> 2.12.1) mozilla-nspr (4.11 -> 4.12) mozilla-nss (3.21 -> 3.21.1) obs-service-set_version ocfs2-tools oniguruma opencc (1.0.3 -> 1.0.3.1) orc (0.4.24 -> 0.4.25) perl-Capture-Tiny (0.30 -> 0.36) perl-Date-Manip (6.52 -> 6.53) perl-DateTime (1.21 -> 1.25) perl-DateTime-TimeZone (1.95 -> 1.96) perl-Devel-StackTrace (2.00 -> 2.01) perl-MIME-Types (2.12 -> 2.13) perl-Net-DNS (1.04 -> 1.05) perl-Perl-Tidy (20150815 -> 20160302) perl-RPC-XML (0.78 -> 0.79) perl-Readonly (2.00 -> 2.01) perl-XML-LibXML (2.0123 -> 2.0124) perl-XML-XPath (1.31 -> 1.33) pesign-obs-integration pfstools php5 (5.6.18 -> 5.6.19) plasma-framework (5.19.0 -> 5.20.0) plasma5-desktop postgresql94 (9.4.5 -> 9.4.6) postgresql94-libs (9.4.5 -> 9.4.6) pstoedit python-Pillow (3.1.0 -> 3.1.1) python-lxml (3.4.4 -> 3.5.0) python-packaging (15.3 -> 16.5) python-requests python3 (3.4.3 -> 3.5.1) python3-base (3.4.3 -> 3.5.1) python3-doc (3.4.3 -> 3.5.1) rsyslog (8.16.0 -> 8.17.0) ruby-common rubygem-cheetah (0.4.0 -> 0.5.0) sac samba (4.3.5 -> 4.3.6) solid (5.19.0 -> 5.20.0) sonnet (5.19.0 -> 5.20.0) source-highlight sqlite3 (3.11.0 -> 3.11.1) squid (3.5.13 -> 3.5.15) sunpinyin (2.0.4+git20150706.cf18102 -> 2.0.4+git20160225.844ad0f) systemd talloc tcl (8.6.4 -> 8.6.5) texlive (6.2.0 -> 6.2.1) texlive-specs-m (2014.100.svn34069 -> 2015.104.svn37789) threadweaver (5.19.0 -> 5.20.0) tk (8.6.4 -> 8.6.5) tomcat tracker (1.6.1 -> 1.6.2) tracker-extras (1.6.1 -> 1.6.2) vim (7.4.1421 -> 7.4.1525) virtualbox (5.0.14 -> 5.0.16) vsftpd xf86-video-intel yast2 (3.1.176 -> 3.1.177) yast2-drbd (3.1.19 -> 3.1.20) yast2-installation (3.1.171 -> 3.1.172) yast2-iscsi-client (3.1.25 -> 3.1.26) yast2-network (3.1.143 -> 3.1.144) yast2-storage (3.1.79 -> 3.1.82) === Details === ==== MozillaFirefox ==== Version update (44.0.2 -> 45.0) Subpackages: MozillaFirefox-translations-common - update to Firefox 45.0 (boo#969894) * requires NSPR 4.12 / NSS 3.21.1 * Instant browser tab sharing through Hello * Synced Tabs button in button bar * Tabs synced via Firefox Accounts from other devices are now shown in dropdown area of Awesome Bar when searching * Introduce a new preference (network.dns.blockDotOnion) to allow blocking .onion at the DNS level * Tab Groups (Panorama) feature removed * MFSA 2016-16/CVE-2016-1952/CVE-2016-1953 Miscellaneous memory safety hazards * MFSA 2016-17/CVE-2016-1954 (bmo#1243178) Local file overwriting and potential privilege escalation through CSP reports * MFSA 2016-18/CVE-2016-1955 (bmo#1208946) CSP reports fail to strip location information for embedded iframe pages * MFSA 2016-19/CVE-2016-1956 (bmo#1199923) Linux video memory DOS with Intel drivers * MFSA 2016-20/CVE-2016-1957 (bmo#1227052) Memory leak in libstagefright when deleting an array during MP4 processing * MFSA 2016-21/CVE-2016-1958 (bmo#1228754) Displayed page address can be overridden * MFSA 2016-22/CVE-2016-1959 (bmo#1234949) Service Worker Manager out-of-bounds read in Service Worker Manager * MFSA 2016-23/CVE-2016-1960/ZDI-CAN-3545 (bmo#1246014) Use-after-free in HTML5 string parser * MFSA 2016-24/CVE-2016-1961/ZDI-CAN-3574 (bmo#1249377) Use-after-free in SetBody * MFSA 2016-25/CVE-2016-1962 (bmo#1240760) Use-after-free when using multiple WebRTC data channels * MFSA 2016-26/CVE-2016-1963 (bmo#1238440) Memory corruption when modifying a file being read by FileReader * MFSA 2016-27/CVE-2016-1964 (bmo#1243335) Use-after-free during XML transformations * MFSA 2016-28/CVE-2016-1965 (bmo#1245264) Addressbar spoofing though history navigation and Location protocol property * MFSA 2016-29/CVE-2016-1967 (bmo#1246956) Same-origin policy violation using perfomance.getEntries and history navigation with session restore * MFSA 2016-30/CVE-2016-1968 (bmo#1246742) Buffer overflow in Brotli decompression * MFSA 2016-31/CVE-2016-1966 (bmo#1246054) Memory corruption with malicious NPAPI plugin * MFSA 2016-32/CVE-2016-1970/CVE-2016-1971/CVE-2016-1975/ CVE-2016-1976/CVE-2016-1972 WebRTC and LibVPX vulnerabilities found through code inspection * MFSA 2016-33/CVE-2016-1973 (bmo#1219339) Use-after-free in GetStaticInstance in WebRTC * MFSA 2016-34/CVE-2016-1974 (bmo#1228103) Out-of-bounds read in HTML parser following a failed allocation * MFSA 2016-35/CVE-2016-1950 (bmo#1245528) Buffer overflow during ASN.1 decoding in NSS (fixed by requiring 3.21.1) * MFSA 2016-36/CVE-2016-1979 (bmo#1185033) Use-after-free during processing of DER encoded keys in NSS (fixed by requiring 3.21.1) * MFSA 2016-37/CVE-2016-1977/CVE-2016-2790/CVE-2016-2791/ CVE-2016-2792/CVE-2016-2793/CVE-2016-2794/CVE-2016-2795/ CVE-2016-2796/CVE-2016-2797/CVE-2016-2798/CVE-2016-2799/ CVE-2016-2800/CVE-2016-2801/CVE-2016-2802 Font vulnerabilities in the Graphite 2 library - Remove B_CNT from symbols.zip filename to reduce build-compare noise ==== a2ps ==== - Reduce build-compare noise, no timestamps a2ps-buildcompare.patch ==== alpine ==== Subpackages: pico - Remove timestamp from binary alpine-timestamp.patch ==== attica-qt5 ==== Version update (5.19.0 -> 5.20.0) Subpackages: attica-qt5-devel libKF5Attica5 - Update to 5.20.0 (boo#970856) * For more details please see: https://www.kde.org/announcements/kde-frameworks-5.20.0.php ==== autoyast2 ==== Version update (3.1.116 -> 3.1.118) Subpackages: autoyast2-installation - Check uptime instead of system time while waiting for systemd services to be restarted (bsc#956730) - 3.1.118 - Fixed crash if the general/mode section has not been defined. (bnc#968080) - 3.1.117 ==== baloo5 ==== Version update (5.19.0 -> 5.20.0) Subpackages: baloo5-devel baloo5-file baloo5-imports baloo5-kioslaves baloo5-tools libKF5Baloo5 libKF5BalooEngine5 - Update to 5.20.0 (boo#970856) * For more details please see: https://www.kde.org/announcements/kde-frameworks-5.20.0.php ==== binutils ==== Subpackages: binutils-devel - Update binutils-2.26-branch.diff, updates to branch head. (swo#19739) (swo#19775) ==== blog ==== Version update (2.17 -> 2.18) - Do not use privata glibc API (boo#967437) but implement missing shared memory mkstemp() - Remove patch remove-bad-symbol-use.patch - remove-bad-symbol-use.patch: Remove bad use of internal glibc interface (bnc#967437) ==== bluez-qt ==== Version update (5.19.0 -> 5.20.0) Subpackages: bluez-qt-devel bluez-qt-imports bluez-qt-udev libKF5BluezQt6 - Update to 5.20.0 (boo#970856) * For more details please see: https://www.kde.org/announcements/kde-frameworks-5.20.0.php ==== breeze5-icons ==== Version update (5.19.0 -> 5.20.0) - Update to 5.20.0 (boo#970856) * Many new icons * Add virtualbox mimetype icons and some other missing mimetypes * Add synaptic and octopi icon support * Fix cut icon (kde#354061) * Fix name of audio-headphones.svg (+=d) * Rating icons with smaller margin (1px) * For more details please see: https://www.kde.org/announcements/kde-frameworks-5.20.0.php ==== btrfsmaintenance ==== Version update (0.1.2 -> 0.2) - version 0.2 - updated documentation - support debian-like configuration paths - no hardcoded paths to external utilities - fixed logger name typos for 'journal' target - defrag fixes (sysconfig, find arguments) - version 0.1.2 - change default config for trim: off - journal loggin should work (fixed a typo) - version 0.1.1 - fix typo and make journal logging target work - cron refresh: remove bashism - cron refresh: remove debugging messages - post installation must create the cron links (bsc#904518) - Removed patches: * btrfsmaintenance-0.1-fix-bashisms.patch - fix bashism in btrfsmaintenance-refresh-cron.sh script - add patches: * btrfsmaintenance-0.1-fix-bashisms.patch - add COPYING, README.md - add config option to specify log target (stdout, or journal) - clean spec - add Url tag - fix sysconfig file Path: tags - initial import 0.1 ==== btrfsprogs ==== Subpackages: libbtrfs0 - hide min/max macros clashing with gcc 6 (bnc#966257) (0001-btrfs-progs-libbtrfs-remove-max-min-macros-from-API.patch) ==== build ==== Version update (20151105 -> 20160304) Subpackages: build-mkbaselibs build-mkdrpms - add switch to enable VM console input - add --vm-user option to run kvm as non-root - Implement experimental obscpio unpacking - Use fallocate -p for a fast zero-fill, correctly truncate. - PowerVM backend - Make --ignoreignore only ignore ignores from the project config - aggregate patches fields - Fail simpleimage build when integration scripts fail - mkdrpms: do not create debuginfo/source deltas Kiwi: - Support new Kiwi v8 (experimental) - Make sure kiwi is called in UTF-8 locale - Kiwi appliance: support "replaces" attribute and handle it as buildignore - KIWI profile support - Support a way to map urls to OBS project/repos Debian: - Support lintian when OBS_DCH_RELEASE set - Add support for debbuild's eval and .debmacros ==== busybox ==== - Disable build timestamp ==== clamav ==== Version update (0.99 -> 0.99.1) - Update to version 0.99.1 * hwp5.x: fix for streams without names * libclamav: yara: avoid unaliged access to 64bit variable * patch by Mark Allan to add show-progress option to freshclam. * added 'CustomXML' as trigger for likely OOXML * ClamAV 0.99.1 beta1 release. * add scanning options for scanning xml-based documents (MSXML, OOXML, HWPML) and HWP3 * add dconfs for XDP, MBR, GPT, APM, OOXML, MSXML, and HWP formats * hwp: scan decompressed data on limits exceeded * Fix for signature name length<3 in .ign & .ign2 CVD files. * Change RTF file magic from '{\rtf' to '{\rt' * zeroing out buffer at allocation to avoid writing uninitialized bytes to a file * adding check for compressed input stream * clean up and boost accuracy to detecting OOXML documents * Fix crash when using pcre statistics due to inconsistent memory management function calls * adding check to verify a valid number of rounds for rijndael aes encryption/decryption * fixing edge case revealed by unit testing * let html be scanned raw when --scan-html=no is in effect. * fix crash due to memory overlay with crafted 7z files. * fixing off by one OOB write in htmlnorm * fixing autoit OOB bufferread * sigtool: adding support for decoding cdb sigs * fix embedded http links. * fix regression crash on sid 1005597703 due to uninitialzed (i.e., garbage initialized) structure. * corrects mso stream prefix value for big endian processors. * ooxml_hwp: add support for filetyping and preclassification * hwpole2: new filetype and handler for hwp embedded ole2 files * fixing possible oob dereference when parsing mbox files * adding explicit wwunpack oob checks * fixing edge case where a null terminator was unintentionally written into an adjacent buffer. * hwpml: use msxml_parser callback scanner for binary data * msxml_parser: add callback-based scanning mechanism * HWPML: added hwpml_keys for hwpml parsing * add HMPML filetype, tab fixes in filetype.c * Hwp3.x: inflate compressed segment and offset tracking * Hwp3.x file header parsing and preclass * pcre: fixed minimum pcre version check * fix detection of libcheck without pkg-config file * add HWP5 filetype tracking to preclassification * add HWP 3.x internal filetypes * add hwp5 contents to preclass set * proper identification of HWP file format * strengthen file typing for OOXML. * normalization of whitelist signatures * github issue #9 - wrong length & offset. ==== cmake ==== Version update (3.4.3 -> 3.5.0) - update to 3.5.0 * Find modules for Boost, FLEX, GTest, GTK2, PNG, TIFF, and XercesC now provide imported targets. * The FindOpenMP module learned to support Clang. * Support was added for the ARM Compiler (arm.com) with compiler id ?ARMCC?. * The ?cmake(1)? ?-E time? command now properly passes arguments with spaces or special characters through to the child process. This may break scripts that worked around the bug with their own extra quoting or escaping. Full changelog at https://cmake.org/cmake/help/v3.5/release/3.5.html - Update macros to allow redefinition of builddir not to be build (found 1 upstream that already has build with actually some distributed files) ==== cpio ==== - Recommend mt_st as it is not hard dependency - fix typos in the description - add 'Require: mt_st' in order not to surprise users by the missing 'mt' binary - Disable mt building: this binary from mt_st package offers advanced capabilities with the same functionality. - Enable rmt building: 'dump' package no longer include it, besides cpio code base for rmt is more fresh. - Reflect those changes in the package description. ==== cups ==== Version update (2.1.0 -> 2.1.3) Subpackages: cups-client cups-devel cups-libs cups-libs-32bit - Version upgrade to 2.1.3: CUPS 2.1.3 fixes some issues in the scheduler, sample drivers, and user commands. A detailed list of changes can be found in the CHANGES.txt file. Changes include (excerpt): * The scheduler should not exit under memory pressure (<rdar://problem/23255001>) * Fixed some issues in ipptool for skipped tests (<rdar://problem/24137160>) * The "lp -H resume" command did not reset the "job-state-reasons" attribute value (STR #4752) * The scheduler did not allow access to resource files (icons, etc.) when the web interface was disabled (STR #4755) - Version upgrade to 2.1.2: CUPS 2.1.2 fixes an issue in the 2.1.1 source archives which actually contained a current 2.2 snapshot. There are no other changes. - Version upgrade to 2.1.1: CUPS 2.1.1 fixes a number of USB and IPP printing issues, addresses some error reporting and hardening issues in the scheduler, and updates some localizations. A detailed list of changes can be found in the CHANGES.txt file. Changes include (excerpt): * Security hardening fixes (<rdar://problem/23131948>, <rdar://problem/23132108>, <rdar://problem/23132353>, <rdar://problem/23132803>, <rdar://problem/23133230>, <rdar://problem/23133393>, <rdar://problem/23133466>, <rdar://problem/23133833>, <rdar://problem/23133998>, <rdar://problem/23134228>, <rdar://problem/23134299>, <rdar://problem/23134356>, <rdar://problem/23134415>, <rdar://problem/23134506>, <rdar://problem/23135066>, <rdar://problem/23135122>, <rdar://problem/23135207>, <rdar://problem/23144290>, <rdar://problem/23144358>, <rdar://problem/23144461>) * The cupsGetPPD* functions did not work with IPP printers (STR #4725) * Some older HP LaserJet printers need a delayed close when printing using the libusb-based USB backend (STR #4549) * The libusb-based USB backend did not unload the kernel usblp module if it was preventing the backend from accessing the printer (STR #4707) * Current Primera printers were incorrectly reported as Fargo printers (STR #4708) * The IPP backend did not always handle jobs getting canceled at the printer (<rdar://problem/22716820>) * Added USB quirk for Canon MP530 (STR #4730) * The scheduler did not deliver job notifications for jobs submitted to classes (STR #4733) * Changing the printer-is-shared value for a remote queue did not produce an error (STR #4738) * The IPP backend incorrectly included the job-password attribute in Validate-Job requests (<rdar://problem/23531939>) ==== cups-backends ==== - Since cups-filters version 1.6.0 the beh backend is provided by the cups-filters RPM as /usr/lib/cups/backend/beh which is a C re-write of the beh backend written in Perl that is still provided here but now named /usr/lib/cups/backend/beh.pl to avoid that cups-backends conflicts with cups-filters. ==== cups-filters ==== Version update (1.4.0 -> 1.8.2) Subpackages: cups-filters-cups-browsed cups-filters-foomatic-rip cups-filters-ghostscript - Version upgrade to 1.8.2 * Allow disabling dependencies on Ghostscript and Foomatic (Bug #1342). * cups-browsed: Optionally generate also local queues pointing to remote raw queues. Usually only queues pointing to remote queues with PPD/driver are created (Debian bug #814020, Debian bug #756724). - Version upgrade to 1.8.1 * cups-browsed: Do not disable queues which still have jobs (and therefore cannot be removed) when avahi-daemon goes away, the print server is most probably still available and printing can be continued. Especially important on mobile devices where avahi-daemon is shut down when the print dialog is closed (and the job(s) still printing). - Version upgrade to 1.8.0 * COPYING: Replaced the COPYING file by a file in Debian format, derived from Debian's file but updated and corrected. * braille: Added info about additional packages needed for Braille printing to the README file. * braille: Let the Braille filters use lou_translate of liblouis if the more sophisticated file2brl of liblouisutdml is not installed. This is decided on at run time, so later installation of liblouisutdml will let the filters automatically switch to file2brl. * braille: Allow to build with Braille support also if liblouis is not installed at build time. * braille: Added checks for the presence of helper tools, to get clear messages in the CUPS error_log if something is missing. * Fixed copyright headers of files inherited from CUPS or derived from CUPS, pointing to COPYING as license info file, removing Apple exceptions, removing hints that a missing license info file can be found at www.cups.org, and removing "$Id" SVN file ID placeholders. * Updated COPYING file for missing implicitclass and beh backends. - Version upgrade to 1.7.0 * cups-browsed: Added possibility to trigger the auto shutdown by the queues of cups-browsed being without jobs. Before auto shutdown was only possible when all queues have gone away. This allows auto shutdown on mobile devices where avahi-daemon is also used for other things than printing. - Version upgrade to 1.6.0 * cups-browsed: Fixed use of CUPS domain socket, both detection during build process and permission check at runtime. * foomatic-rip: Fixed buffer overflow when reading environment variables CUPS_FONTPATH, CUPS_DATADIR, and GS_LIB (Bug [#1336]). * beh: Introduced beh, the Backend Error Handler, a wrapper backend to make handling of backend errors more configurable. This backend is a C re-write of the beh backend written in Perl which was part of the former foomatic-filters package. Several people asked for beh getting moved to cups-filters. * braille: Make image printing working also if ImageMagick generates formatted images without header. * braille: If the user does not select a Braille translation, let the embosser do the translation. * cups-browsed: Added version info to help screen and start-up in debug mode, call help screen also via "--version" option. * cups-browsed: Minor improvements in help screen and man page. - Version upgrade to 1.5.0 * cups-browsed: Allow use of an alternative configuration file via the "-c" command line option. * cups-browsed: Allow supplying configuration settings via the command line using the "-o" command line option. * cups-browsed: Command line help via the "-h" or "--help" command line option. ==== ddd ==== - Remove timestamps from binaries ddd-buildcompare.patch ==== digikam ==== Subpackages: digikam-lang digikam-libs digikam-plugin-color digikam-plugin-decorate digikam-plugin-enhance digikam-plugin-fxfilters digikam-plugin-transform kipi-plugins kipi-plugins-acquireimage kipi-plugins-geolocation kipi-plugins-lang - add _constraints file to set min disk space for ppc64le build ==== dnsmasq ==== - Add gpg signature ==== drbd ==== Subpackages: drbd-kmp-default - Remove timstamp from binaries Add patch drbd-buildcompare.patch ==== drbd-utils ==== Version update (8.9.5 -> 8.9.6) - fate#320495. Support ha resource agent of drbd9. Add patch support-drbd9-ra.patch - bsc#955177, fence when another node pacemaker shutdown. add patch fence-after-pacemaker-down.patch - Update to v8.9.6 * Call "drbdsetup resize" only as often as necessary on "drbdadm resize" * Disconnect connection first on single path deletion from connection * Add unfence-peer handler * Fix "drbdadm adjust" for proxy configurations ==== efivar ==== Version update (0.21 -> 0.23) - Update to 0.23 - Add efivar-nvme-rename.patch and efivar-nvme-no-kernel-header.patch to work around the missing kernel header. - Add efivar-no-static.patch to remove efivar-static since it causes build failure and we don't really need it. - Remove efivar-fix-initializer.patch since it's already in 0.23. - Remove _smp_mflags since the Makefile doesn't work well with the flag. - Add efivar-0.21-gcc6.diff to fix strict-aliasing issue. - Build with -Wno-nonnull as efivar tests nonnull args for zero and that breaks with its use of -Werror. ==== emacs ==== Subpackages: emacs-info emacs-nox emacs-x11 etags - Add small shell extension in emacs wrapper script to disable the AT bridge if not available ==== extra-cmake-modules ==== Version update (5.19.0 -> 5.20.0) Subpackages: extra-cmake-modules-doc - Update to 5.20.0 (boo#970856) * For more details please see: https://www.kde.org/announcements/kde-frameworks-5.20.0.php ==== fontconfig ==== Subpackages: fontconfig-32bit fontconfig-devel - Add fontconfig-locale_c.utf8.patch to recognize C.UTF-8 locale, patch from Debian. ==== frameworkintegration ==== Version update (5.19.0 -> 5.20.0) Subpackages: frameworkintegration-devel frameworkintegration-plugin libKF5Style5 - Update to 5.20.0 (boo#970856) * Remove possible file-name in KDEPlatformFileDialog::setDirectory() * Don't filter by name if we have mime types * For more details please see: https://www.kde.org/announcements/kde-frameworks-5.20.0.php ==== fvwm2 ==== - Clean up with spec-cleaner - Remove 'system.fvwm2rc_' seems not to be used - Fix module 'Command' see (boo#966650) ==== gcolor2 ==== - drop build time from png file to fix build-compare ==== gd ==== Subpackages: libgd3 libgd3-32bit - add missing config/getver.pl [bsc#965190] ==== git ==== Version update (2.7.2 -> 2.7.3) Subpackages: git-core git-cvs git-daemon git-email git-gui git-svn git-web gitk - git 2.7.3: * "git show 'HEAD:Foo[BAR]Baz'" did not interpret the argument as a rev, i.e. the object named by the the pathname with wildcard characters in a tree object. * "git rev-parse --git-common-dir" used in the worktree feature misbehaved when run from a subdirectory. * The "v(iew)" subcommand of the interactive "git am -i" command was broken in 2.6.0 timeframe when the command was rewritten in C. * "git merge-tree" used to mishandle "both sides added" conflict with its own "create a fake ancestor file that has the common parts of what both sides have added and do a 3-way merge" logic; this has been updated to use the usual "3-way merge with an empty blob as the fake common ancestor file" approach used in the rest of the system. * The documentation did not clearly state that the 'simple' mode is now the default for "git push" when push.default configuration is not set. * Test adjustments for GNU grep, obsoleting git-2.7.1-fix-tests-grep-2.23.patch * "git config section.var value" to set a value in per-repository configuration file failed when it was run outside any repository, but didn't say the reason correctly. ==== google-noto-fonts ==== Subpackages: google-noto-fonts-doc noto-sans-fonts - Add NotoSansCJK.ttc.zip and ship all CJK fonts in a single ttc file and an single subpackage, this will save a lot of disk space. - Specify file permissions in defattr, some zip files are shipping files with incorrect permissions. ==== gpg2 ==== Version update (2.1.10 -> 2.1.11) - GnuPG 2.1.11: * gpg: New command --export-ssh-key to replace the gpgkey2ssh tool. * gpg: Allow to generate mail address only keys with --gen-key. * gpg: "--list-options show-usage" is now the default. * gpg: Make lookup of DNS CERT records holding an URL work. * gpg: Emit PROGRESS status lines during key generation. * gpg: Don't check for ambigious or non-matching key specification in the config file or given to --encrypt-to. This feature will return in 2.3.x. * gpg: Lock keybox files while updating them. * gpg: Fix possible keyring corruption. (bug#2193) * gpg: Fix regression of "bkuptocard" sub-command in --edit-key and remove "checkbkupkey" sub-command introduced with 2.1. (bug#2169) * gpg: Fix internal error in gpgv when using default keyid-format. * gpg: Fix --auto-key-retrieve to work with dirmngr.conf configured keyservers. (bug#2147). * agent: New option --pinentry-timeout. * scd: Fix regression for generating RSA keys on card. * dirmmgr: All configured keyservers are now searched. * dirmngr: Install CA certificate for hkps.pool.sks-keyservers.net. Use this certiticate even if --hkp-cacert is not used. * gpgtar: Add actual encryption code. gpgtar does now fully replace gpg-zip. * gpgtar: Fix filename encoding problem on Windows. * Print a warning if a GnuPG component is using an older version of gpg-agent, dirmngr, or scdaemon. - disable running test which no longer work - remove 0001-gpg-Improve-the-keyblock-cache-s-transparency.patch is now upstream - the PIE options are implemented in the upstream build, and spec code broke the build. The only remaining broken executable was gpgsplit, which was removed from the package ==== gtk2 ==== Version update (2.24.29 -> 2.24.30) Subpackages: gtk2-data gtk2-devel gtk2-immodule-amharic gtk2-immodule-inuktitut gtk2-immodule-thai gtk2-immodule-vietnamese gtk2-immodule-xim gtk2-tools gtk2-tools-32bit libgtk-2_0-0 libgtk-2_0-0-32bit typelib-1_0-Gtk-2_0 - Update to version 2.24.30: + Win32: Build fixes. + X11: Support Randr 1.5 monitor information. + Bugs fixed: bgo#722815, bgo#612611, bgo#699652, bgo#698652, bgo#758893. + Updated translations. - Drop gtk2-Deliver-GdkModifierType-during-drag-motion.patch and gtk2-randr-1.5-monitor-support.patch: Fixed upstream. ==== ibus-pinyin ==== - Add ibus-pinyin-default-full.patch: Set ibus-pinyin engine to full pinyin as default when dconf data not exist.(bnc#955325) ==== icewm ==== Subpackages: icewm-config-upstream icewm-default icewm-lite - Disable image centering, with scaling now working it keeps aspect ration with centering enabled: * icewm-preferences.patch - Update prefferences patch to point to correct wallpaper on the disk based on openSUSE/SLE branding package - Add back icewm menu as it is used by us * icewm-susemenu.patch - Add patch to fix icewm session desktop files * icewm-session-desktop.patch ==== installation-images-openSUSE ==== Version update (14.232 -> 14.235) - Remove uga grub2 module - 14.235 - Added modprobe for fuse so that hmcdrv can actually work - 14.234 - Also allow desktop-specific mimeapps.list files - 14.233 ==== karchive ==== Version update (5.19.0 -> 5.20.0) Subpackages: karchive-devel libKF5Archive5 - Update to 5.20.0 (boo#970856) * For more details please see: https://www.kde.org/announcements/kde-frameworks-5.20.0.php ==== kauth ==== Version update (5.19.0 -> 5.20.0) Subpackages: kauth-devel libKF5Auth5 - Update to 5.20.0 (boo#970856) * Fix kded5 dead lock when a program using kauth exits * For more details please see: https://www.kde.org/announcements/kde-frameworks-5.20.0.php ==== kbookmarks ==== Version update (5.19.0 -> 5.20.0) Subpackages: kbookmarks-devel libKF5Bookmarks5 - Update to 5.20.0 (boo#970856) * For more details please see: https://www.kde.org/announcements/kde-frameworks-5.20.0.php ==== kcmutils ==== Version update (5.19.0 -> 5.20.0) Subpackages: kcmutils-devel libKF5KCMUtils5 - Update to 5.20.0 (boo#970856) * For more details please see: https://www.kde.org/announcements/kde-frameworks-5.20.0.php ==== kcodecs ==== Version update (5.19.0 -> 5.20.0) Subpackages: kcodecs-devel libKF5Codecs5 - Update to 5.20.0 (boo#970856) * For more details please see: https://www.kde.org/announcements/kde-frameworks-5.20.0.php ==== kcompletion ==== Version update (5.19.0 -> 5.20.0) Subpackages: kcompletion-devel libKF5Completion5 - Update to 5.20.0 (boo#970856) * For more details please see: https://www.kde.org/announcements/kde-frameworks-5.20.0.php ==== kconfig ==== Version update (5.19.0 -> 5.20.0) Subpackages: kconf_update5 kconfig-devel libKF5ConfigCore5 libKF5ConfigGui5 - Update to 5.20.0 (boo#970856) * KConfigIniBackend: Fix expensive detach in lookup * For more details please see: https://www.kde.org/announcements/kde-frameworks-5.20.0.php ==== kconfigwidgets ==== Version update (5.19.0 -> 5.20.0) Subpackages: kconfigwidgets-devel libKF5ConfigWidgets5 - Update to 5.20.0 (boo#970856) * For more details please see: https://www.kde.org/announcements/kde-frameworks-5.20.0.php ==== kcoreaddons ==== Version update (5.19.0 -> 5.20.0) Subpackages: kcoreaddons-devel libKF5CoreAddons5 - Update to 5.20.0 (boo#970856) * Fix Kdelibs4 config migration for Windows * Add API to get Frameworks runtime version info * KRandom: Don't use up 16K of /dev/urandom to seed rand() (kde#359485) * For more details please see: https://www.kde.org/announcements/kde-frameworks-5.20.0.php - Use %mime_database_post(un) macros ==== kcrash ==== Version update (5.19.0 -> 5.20.0) Subpackages: kcrash-devel libKF5Crash5 - Update to 5.20.0 (boo#970856) * For more details please see: https://www.kde.org/announcements/kde-frameworks-5.20.0.php ==== kdbusaddons ==== Version update (5.19.0 -> 5.20.0) Subpackages: kdbusaddons-devel kdbusaddons-tools libKF5DBusAddons5 - Update to 5.20.0 (boo#970856) * For more details please see: https://www.kde.org/announcements/kde-frameworks-5.20.0.php ==== kdeclarative ==== Version update (5.19.0 -> 5.20.0) Subpackages: kdeclarative-components kdeclarative-devel libKF5CalendarEvents5 libKF5Declarative5 libKF5QuickAddons5 - Update to 5.20.0 (boo#970856) * Don't call null object pointer (kde#347962) * For more details please see: https://www.kde.org/announcements/kde-frameworks-5.20.0.php ==== kded ==== Version update (5.19.0 -> 5.20.0) Subpackages: kded-devel - Update to 5.20.0 (boo#970856) * Make it possible to compile with -DQT_NO_CAST_FROM_ASCII * For more details please see: https://www.kde.org/announcements/kde-frameworks-5.20.0.php ==== kdelibs4support ==== Version update (5.19.0 -> 5.20.0) Subpackages: kdelibs4support-devel libKF5KDELibs4Support5 - Update to 5.20.0 (boo#970856) * Fix session management for KApplication based applications (kde#354724, boo#955280) * For more details please see: https://www.kde.org/announcements/kde-frameworks-5.20.0.php - Drop upstreamed fix-session-saving.patch ==== kdesignerplugin ==== Version update (5.19.0 -> 5.20.0) Subpackages: kdesignerplugin-devel kdesignerplugin-lang - Update to 5.20.0 (boo#970856) * For more details please see: https://www.kde.org/announcements/kde-frameworks-5.20.0.php ==== kdesu ==== Version update (5.19.0 -> 5.20.0) Subpackages: kdesu-devel libKF5Su5 - Update to 5.20.0 (boo#970856) * For more details please see: https://www.kde.org/announcements/kde-frameworks-5.20.0.php ==== kdewebkit ==== Version update (5.19.0 -> 5.20.0) Subpackages: kdewebkit-devel libKF5WebKit5 - Update to 5.20.0 (boo#970856) * For more details please see: https://www.kde.org/announcements/kde-frameworks-5.20.0.php ==== kdnssd-framework ==== Version update (5.19.0 -> 5.20.0) Subpackages: kdnssd-framework-devel libKF5DNSSD5 - Update to 5.20.0 (boo#970856) * For more details please see: https://www.kde.org/announcements/kde-frameworks-5.20.0.php ==== kdoctools ==== Version update (5.19.0 -> 5.20.0) Subpackages: kdoctools-devel kdoctools-lang - Update to 5.20.0 (boo#970856) * Use unicode characters for callouts * For more details please see: https://www.kde.org/announcements/kde-frameworks-5.20.0.php ==== kemoticons ==== Version update (5.19.0 -> 5.20.0) Subpackages: kemoticons-devel libKF5Emoticons5 - Update to 5.20.0 (boo#970856) * For more details please see: https://www.kde.org/announcements/kde-frameworks-5.20.0.php ==== kernel-source ==== Version update (4.4.3 -> 4.5.0) Subpackages: kernel-default kernel-default-devel kernel-devel kernel-docs kernel-macros kernel-syms - Disable relax relocations for x86 loader (bsc#970239). - commit a92e8a7 - ALSA: usb-audio: Add sanity checks for endpoint accesses (CVE-2016-2184,bsc#971125). - ALSA: usb-audio: Fix NULL dereference in create_fixed_stream_quirk() (CVE-2016-2184,bsc#971125). - commit 8336511 - Update to 4.5-final. - commit 3c4edc5 - Linux 4.4.5. - Refresh patches.suse/stack-unwind. - commit 09dee88 - Update s390x config files: Bump NR_CPUS to 256 It was set to 256 in the SLES kernel 2 years ago already. - commit 43cf630 - config: armv7hl: Enable DRM_ROCKCHIP Firefly-RK3288 is among the boards that this will benefit. - commit 2a3d0e4 - Update to 4.5-rc7. - commit 924f2b7 - Update config files: Modularize NF_REJECT_IPV4/V6 There is no reason why these helper modules should be built-in when the rest of netfilter is built as modules. - commit c81fe72 - Update config files. (vanillas) - commit 0c1f87e - Linux 4.4.4 (bnc#910440 bnc#968396 bnc#969064 boo#955096 boo#961263 boo#961887 boo#967938 bsc#962535 bsc#966137). - Delete patches.drivers/0001-bcache-Add-a-cond_resched-call-to-gc.patch. - Delete patches.drivers/0002-bcache-BUG-clear-BCACHE_DEV_UNLINK_DONE-flag-when-at.patch. - Delete patches.drivers/0003-bcache-fix-a-livelock-in-btree-lock.patch. - Delete patches.drivers/0004-bcache-unregister-reboot-notifier-when-bcache-fails-.patch. - Delete patches.drivers/0005-fix-a-leak-in-bch_cached_dev_run.patch. - Delete patches.drivers/ALSA-hda-Apply-clock-gate-workaround-to-Skylake-too. - Delete patches.drivers/bcache-fix-writeback-thread-incomplete-stripes-starvation.patch. - Delete patches.drivers/drm-i915-shut-up-gen8-SDE-irq-dmesg-noise. - Delete patches.drivers/drm-radeon-Add-a-common-function-for-DFS-handling. - Delete patches.drivers/drm-radeon-Don-t-hang-in-radeon_flip_work_func-on-di. - Delete patches.drivers/drm-radeon-Fix-off-by-one-errors-in-radeon_vm_bo_set. - Delete patches.drivers/drm-radeon-Fix-slow-audio-over-DP-on-DCE8. - Delete patches.drivers/drm-radeon-call-hpd_irq_event-on-resume. - Delete patches.drivers/drm-radeon-cleaned-up-VCO-output-settings-for-DP-aud. - Delete patches.drivers/drm-radeon-fix-DP-audio-support-for-APU-with-DCE4.1-. - Delete patches.drivers/drm-radeon-hold-reference-to-fences-in-radeon_sa_bo_. - Delete patches.drivers/drm-radeon-pm-adjust-display-configuration-after-pow. - Delete patches.drivers/drm-radeon-properly-byte-swap-vce-firmware-setup. - Delete patches.drivers/drm-radeon-use-post-decrement-in-error-handling. - Delete patches.fixes/drm-Fix-drm_vblank_pre-post_modeset-regression-from. - Delete patches.fixes/drm-Fix-treatment-of-drm_vblank_offdelay-in-drm_vbla. - Delete patches.fixes/drm-No-Op-redundant-calls-to-drm_vblank_off-v2. - Delete patches.fixes/drm-Prevent-vblank-counter-bumps-1-with-active-vblan. - Delete patches.fixes/drm-nouveau-display-Enable-vblank-irqs-after-display. - Delete patches.fixes/genirq-Validate-action-before-dereferencing-it-in-ha.patch. - Delete patches.fixes/sd-Optimal-I-O-size-is-in-bytes-not-sectors. - Delete patches.fixes/tcp-do-not-drop-syn_recv-on-all-icmp-reports.patch. - Update config files. - commit b719bbe - Refresh patches.drivers/0001-bcache-Add-a-cond_resched-call-to-gc.patch. - Refresh patches.drivers/0002-bcache-BUG-clear-BCACHE_DEV_UNLINK_DONE-flag-when-at.patch. - Refresh patches.drivers/0003-bcache-fix-a-livelock-in-btree-lock.patch. - Refresh patches.drivers/0004-bcache-unregister-reboot-notifier-when-bcache-fails-.patch. - Refresh patches.drivers/0005-fix-a-leak-in-bch_cached_dev_run.patch. Update upstream status. - commit 859059c - Refresh patches.suse/xen-pv-devmem_is_allowed.patch. - commit a55dde2 - Disable access to lowmem in a Xen PV guest (bnc#964342). - commit e7a0da2 - tcp: do not drop syn_recv on all icmp reports (bnc#969064). - commit 1ed9fdd - radeon: r100: Silence 'may be used uninitialized' warnings (boo#955096,boo#967938). - drm/radeon/pm: adjust display configuration after powerstate (boo#955096,boo#967938). - drm/radeon: Don't hang in radeon_flip_work_func on disabled crtc. (v2) (boo#955096,boo#967938). - drm/radeon/pm: Handle failure of drm_vblank_get (boo#955096,boo#967938). - drm/radeon: use post-decrement in error handling (boo#955096,boo#967938). - drm/radeon: hold reference to fences in radeon_sa_bo_new (boo#955096,boo#967938). - drm/radeon: fix DP audio support for APU with DCE4.1 display engine (boo#955096,boo#967938). - drm/radeon: Add a common function for DFS handling (boo#955096,boo#967938). - drm/radeon: cleaned up VCO output settings for DP audio (boo#955096,boo#967938). - drm/radeon: only init fbdev if we have connectors (boo#955096,boo#967938). - drm/radeon: Ensure radeon bo is unreserved in radeon_gem_va_ioctl (boo#955096,boo#967938). - drm/radeon: properly byte swap vce firmware setup (boo#955096,boo#967938). - drm/radeon: Fix off-by-one errors in radeon_vm_bo_set_addr (boo#955096,boo#967938). - drm/radeon: fix dp link rate selection (v2) (boo#955096,boo#967938). - drm/radeon: only increment sync_seq when a fence is really emitted (boo#955096,boo#967938). - drm/radeon: Fix "slow" audio over DP on DCE8+ (boo#955096,boo#967938). - drm/radeon: Use unlocked gem unreferencing (boo#955096,boo#967938). - drm/radeon: call hpd_irq_event on resume (boo#955096,boo#967938). - commit 803bd2e - config: ARM64: Remove hardcoded console setting Proper way would be to derive it from the ACPI or Device tree chosen output. - commit ad7dbb8 - rpm/kernel-binary.spec.in: Obsolete xen-kmp (fate#315712, bsc#968253) - commit 0e7c4d5 - Copy packaging changes from master to the packaging branch - commit 0a2490d - Update to 4.5-rc6. - commit b239884 ==== kfilemetadata5 ==== Version update (5.19.0 -> 5.20.0) Subpackages: kfilemetadata5-devel - Update to 5.20.0 (boo#970856) * KFileMetadata can now query and store information about the original email a saved file may have been an attachment of * For more details please see: https://www.kde.org/announcements/kde-frameworks-5.20.0.php ==== kglobalaccel ==== Version update (5.19.0 -> 5.20.0) Subpackages: kglobalaccel-devel kglobalaccel5 libKF5GlobalAccel5 libKF5GlobalAccelPrivate5 - Update to 5.20.0 (boo#970856) * For more details please see: https://www.kde.org/announcements/kde-frameworks-5.20.0.php ==== kguiaddons ==== Version update (5.19.0 -> 5.20.0) Subpackages: kguiaddons-devel libKF5GuiAddons5 - Update to 5.20.0 (boo#970856) * For more details please see: https://www.kde.org/announcements/kde-frameworks-5.20.0.php ==== khtml ==== Version update (5.19.0 -> 5.20.0) Subpackages: khtml-devel libKF5KHtml5 - Update to 5.20.0 (boo#970856) * Fix cursor updating in view * Limit string memory use * KHTML java applet viewer: repair broken DBus call to kpasswdserver * For more details please see: https://www.kde.org/announcements/kde-frameworks-5.20.0.php ==== ki18n ==== Version update (5.19.0 -> 5.20.0) Subpackages: ki18n-devel libKF5I18n5 - Update to 5.20.0 (boo#970856) * Use portable import macro for nl_msg_cat_cntr * Skip looking up . and .. to find the translations for an application * Restrict _nl_msg_cat_cntr use to GNU gettext implementations * Add KLocalizedString::languages() * Place Gettext calls only if catalog has been located * For more details please see: https://www.kde.org/announcements/kde-frameworks-5.20.0.php ==== kiconthemes ==== Version update (5.19.0 -> 5.20.0) Subpackages: kiconthemes-devel libKF5IconThemes5 - Update to 5.20.0 (boo#970856) * Make sure variable is being initialized * For more details please see: https://www.kde.org/announcements/kde-frameworks-5.20.0.php ==== kidletime ==== Version update (5.19.0 -> 5.20.0) Subpackages: kidletime-devel libKF5IdleTime5 - Update to 5.20.0 (boo#970856) * For more details please see: https://www.kde.org/announcements/kde-frameworks-5.20.0.php ==== kimageformats ==== Version update (5.19.0 -> 5.20.0) - Update to 5.20.0 (boo#970856) * For more details please see: https://www.kde.org/announcements/kde-frameworks-5.20.0.php ==== kinit ==== Version update (5.19.0 -> 5.20.0) Subpackages: kinit-devel - Update to 5.20.0 (boo#970856) * kdeinit: Prefer loading libraries from RUNPATH * Implement "Qt5 TODO: use QUrl::fromStringList" * For more details please see: https://www.kde.org/announcements/kde-frameworks-5.20.0.php ==== kio ==== Version update (5.19.0 -> 5.20.0) Subpackages: kio-core kio-devel - Update to 5.20.0 (boo#970856) * Fix KIO app-slave connection breaking if appName contains a '/' (kde#357499) * Try multiple authentication methods in case of failures * help: fix mimeType() on get() * KOpenWithDialog: show mimetype name and comment in "Remember" checkbox text (kde#110146) * A series of changes to avoid a directory relist after a file rename in more cases (kde#359596) * http: rename m_iError to m_kioError * kio_http: read and discard body after a 404 with errorPage=false * kio_http: fix mimetype determination when URL ends with '/' * FavIconRequestJob: add accessor hostUrl() so that konqueror can find out what the job was for, in the slot * FavIconRequestJob: fix job hanging when aborting due to favicon too big * FavIconRequestJob: fix errorString(), it only had the URL * KIO::RenameDialog: restore preview support, add date and size labels (kde#356278) * KIO::RenameDialog: refactor duplicated code * Fix wrong path-to-QUrl conversions * Use kf5.kio in the category name to match other categories * For more details please see: https://www.kde.org/announcements/kde-frameworks-5.20.0.php ==== kitemmodels ==== Version update (5.19.0 -> 5.20.0) Subpackages: kitemmodels-devel libKF5ItemModels5 - Update to 5.20.0 (boo#970856) * KLinkItemSelectionModel: Add new default constructor * KLinkItemSelectionModel: Make the linked selection model settable * KLinkItemSelectionModel: Handle changes to the selectionModel model * KLinkItemSelectionModel: Don't store model locally * KSelectionProxyModel: Fix iteration bug * Reset KSelectionProxyModel state when needed * Add a property indicating whether the models form a connected chain * KModelIndexProxyMapper: Simplify logic of connected check * For more details please see: https://www.kde.org/announcements/kde-frameworks-5.20.0.php ==== kitemviews ==== Version update (5.19.0 -> 5.20.0) Subpackages: kitemviews-devel libKF5ItemViews5 - Update to 5.20.0 (boo#970856) * For more details please see: https://www.kde.org/announcements/kde-frameworks-5.20.0.php ==== kjobwidgets ==== Version update (5.19.0 -> 5.20.0) Subpackages: kjobwidgets-devel libKF5JobWidgets5 - Update to 5.20.0 (boo#970856) * For more details please see: https://www.kde.org/announcements/kde-frameworks-5.20.0.php ==== kjs ==== Version update (5.19.0 -> 5.20.0) Subpackages: kjs-devel libKF5JS5 libKF5JSApi5 - Update to 5.20.0 (boo#970856) * Limit string memory use * For more details please see: https://www.kde.org/announcements/kde-frameworks-5.20.0.php ==== kjsembed ==== Version update (5.19.0 -> 5.20.0) Subpackages: kjsembed-devel libKF5JsEmbed5 - Update to 5.20.0 (boo#970856) * For more details please see: https://www.kde.org/announcements/kde-frameworks-5.20.0.php ==== kmediaplayer ==== Version update (5.19.0 -> 5.20.0) Subpackages: kmediaplayer-devel libKF5MediaPlayer5 - Update to 5.20.0 (boo#970856) * For more details please see: https://www.kde.org/announcements/kde-frameworks-5.20.0.php ==== knewstuff ==== Version update (5.19.0 -> 5.20.0) Subpackages: knewstuff-devel libKF5NewStuff5 - Update to 5.20.0 (boo#970856) * Show a warning if there's an error in the Engine * For more details please see: https://www.kde.org/announcements/kde-frameworks-5.20.0.php ==== knotifications ==== Version update (5.19.0 -> 5.20.0) Subpackages: knotifications-devel libKF5Notifications5 - Update to 5.20.0 (boo#970856) * For more details please see: https://www.kde.org/announcements/kde-frameworks-5.20.0.php ==== knotifyconfig ==== Version update (5.19.0 -> 5.20.0) Subpackages: knotifyconfig-devel libKF5NotifyConfig5 - Update to 5.20.0 (boo#970856) * For more details please see: https://www.kde.org/announcements/kde-frameworks-5.20.0.php ==== kpackage ==== Version update (5.19.0 -> 5.20.0) Subpackages: kpackage-devel - Update to 5.20.0 (boo#970856) * Let KDocTools stay optional on KPackage * For more details please see: https://www.kde.org/announcements/kde-frameworks-5.20.0.php ==== kparts ==== Version update (5.19.0 -> 5.20.0) Subpackages: kparts-devel libKF5Parts5 - Update to 5.20.0 (boo#970856) * For more details please see: https://www.kde.org/announcements/kde-frameworks-5.20.0.php ==== kpeople5 ==== Version update (5.19.0 -> 5.20.0) Subpackages: kpeople5-devel - Update to 5.20.0 (boo#970856) * Fix deprecated API usage * Add actionType to the declarative plugin * Reverse the filtering logic in PersonsSortFilterProxyModel * Make the QML example slightly more usable * Add actionType to the PersonActionsModel * For more details please see: https://www.kde.org/announcements/kde-frameworks-5.20.0.php ==== kplotting ==== Version update (5.19.0 -> 5.20.0) Subpackages: kplotting-devel libKF5Plotting5 - Update to 5.20.0 (boo#970856) * For more details please see: https://www.kde.org/announcements/kde-frameworks-5.20.0.php ==== kpty ==== Version update (5.19.0 -> 5.20.0) Subpackages: kpty-devel libKF5Pty5 - Update to 5.20.0 (boo#970856) * For more details please see: https://www.kde.org/announcements/kde-frameworks-5.20.0.php ==== kross ==== Version update (5.19.0 -> 5.20.0) Subpackages: kross-devel - Update to 5.20.0 (boo#970856) * For more details please see: https://www.kde.org/announcements/kde-frameworks-5.20.0.php ==== krunner ==== Version update (5.19.0 -> 5.20.0) - Update to 5.20.0 (boo#970856) * For more details please see: https://www.kde.org/announcements/kde-frameworks-5.20.0.php ==== kservice ==== Version update (5.19.0 -> 5.20.0) Subpackages: kservice-devel - Update to 5.20.0 (boo#970856) * Simplify code, reduce pointer dereferences, container-related improvements * Add kmimeassociations_dumper test program, inspired by bug 359850 * Fix chromium/wine apps not loading on some distributions (kde#213972) * For more details please see: https://www.kde.org/announcements/kde-frameworks-5.20.0.php ==== ktexteditor ==== Version update (5.19.0 -> 5.20.0) Subpackages: ktexteditor-devel - Update to 5.20.0 (boo#970856) * Fix highlighting of all occurences in ReadOnlyPart * Don't iterate over a QString as if it was a QStringList * Properly initialize static QMaps * Prefer toDisplayString(QUrl::PreferLocalFile) * Support surrogate character sending from input method * Do not crash on shutdown when text animation is still running * For more details please see: https://www.kde.org/announcements/kde-frameworks-5.20.0.php ==== ktextwidgets ==== Version update (5.19.0 -> 5.20.0) Subpackages: ktextwidgets-devel libKF5TextWidgets5 - Update to 5.20.0 (boo#970856) * For more details please see: https://www.kde.org/announcements/kde-frameworks-5.20.0.php ==== kunitconversion ==== Version update (5.19.0 -> 5.20.0) Subpackages: kunitconversion-devel libKF5UnitConversion5 - Update to 5.20.0 (boo#970856) * For more details please see: https://www.kde.org/announcements/kde-frameworks-5.20.0.php ==== kwallet ==== Version update (5.19.0 -> 5.20.0) Subpackages: kwallet-devel kwallet-tools kwalletd5 libKF5Wallet5 libkwalletbackend5-5 - Update to 5.20.0 (boo#970856) * Make sure KDocTools is looked-up * Don't pass a negative number to dbus, it asserts in libdbus * Clean cmake files * KWallet::openWallet(Synchronous): don't time out after 25 seconds * For more details please see: https://www.kde.org/announcements/kde-frameworks-5.20.0.php ==== kwidgetsaddons ==== Version update (5.19.0 -> 5.20.0) Subpackages: kwidgetsaddons-devel libKF5WidgetsAddons5 - Update to 5.20.0 (boo#970856) * For more details please see: https://www.kde.org/announcements/kde-frameworks-5.20.0.php ==== kwindowsystem ==== Version update (5.19.0 -> 5.20.0) Subpackages: kwindowsystem-devel libKF5WindowSystem5 - Update to 5.20.0 (boo#970856) * Support _NET_WM_BYPASS_COMPOSITOR (kde#349910) * For more details please see: https://www.kde.org/announcements/kde-frameworks-5.20.0.php ==== kxmlgui ==== Version update (5.19.0 -> 5.20.0) Subpackages: kxmlgui-devel libKF5XmlGui5 - Update to 5.20.0 (boo#970856) * Use non-native Language name as fallback * Fix session management broken since KF5 / Qt5 (kde#354724, boo#955280) * Shortcut schemes: support globally installed schemes * Use Qt's qHash(QKeySequence) when building against Qt 5.6+ * Shortcut schemes: fix bug where two KXMLGUIClients with the same name overwrite each other's scheme file * kxmlguiwindowtest: add shortcuts dialog, for testing the shortcut schemes editor * Shortcut schemes: improve usability by changing texts in GUI * Shortcut schemes: improve scheme list combo (automatic size, don't clear on unknown scheme) * Shortcut schemes: don't prepend the guiclient name to the filename * Shortcut schemes: create dir before trying to save a new shortcut scheme * Shortcut schemes: restore layout margin, it looks very cramped otherwise * Fix memory leak in KXmlGui startup hook * For more details please see: https://www.kde.org/announcements/kde-frameworks-5.20.0.php - Drop upstreamed fix-session-saving.patch ==== kxmlrpcclient5 ==== Version update (5.19.0 -> 5.20.0) Subpackages: kxmlrpcclient5-devel libKF5XmlRpcClient5 - Update to 5.20.0 (boo#970856) * For more details please see: https://www.kde.org/announcements/kde-frameworks-5.20.0.php ==== ldb ==== Subpackages: libldb1 libldb1-32bit - Add ldb-python3.5-fix-soabi_name.patch: Do not change x86_64 to x86-64 when building with python 3.5. ==== libKF5ModemManagerQt ==== Version update (5.19.0 -> 5.20.0) Subpackages: libKF5ModemManagerQt-devel libKF5ModemManagerQt6 - Update to 5.20.0 (boo#970856) * For more details please see: https://www.kde.org/announcements/kde-frameworks-5.20.0.php ==== libKF5NetworkManagerQt ==== Version update (5.19.0 -> 5.20.0) Subpackages: libKF5NetworkManagerQt-devel libKF5NetworkManagerQt6 - Update to 5.20.0 (boo#970856) * For more details please see: https://www.kde.org/announcements/kde-frameworks-5.20.0.php ==== libcaca ==== - Require imlib2-loaders in caca-utils package. All of the utilities fail to load any image without the dependency. ==== libdmapsharing ==== Version update (2.9.32 -> 2.9.34) - Update to version 2.9.34: + Move g_object_unref of server inside conditional. + Remove extra g_object_unref in dacp-share.c. + Initialize the share_bitwise_t share member. - Changes from version 2.9.33: + Use soup_session_new() instead of deprecated soup_session_new_async(). + Always set base URI path. + Use new SoupServer API to create DMAPShare server. + Require libsoup 2.48.0. + Add to dmap-mdns-browser-dnssd.c the ability to lookup host name using mDNS. + Fix compile error. + First pass cleaning up dmap-mdns-browser-dnssd.c. + dns-sd browser: extract name out of, e.g., Foo\032Bar._daap._tcp.local. + Set GError when DNSServiceBrowse fails. ==== libfastjson ==== Version update (0.99.0 -> 0.99.2) - update to 0.99.2 * new API: json_object_get_member_count() * make comaptible with autoconf < 2.64 * 0.99.1 was not released ==== libinput ==== Version update (1.2.0 -> 1.2.1) Subpackages: libinput-devel libinput-udev libinput10 - Update to version 1.2.1: * One fix for touchpads: we added a patch in 1.2 to look at relative finger positions during gestures to decide whether a gesture would be a pinch or a swipe gesture. This caused some two-finger scrolls to be detected as pinch gesture (fdo#94264). The patch added in this release fixes this issue. ==== libjpeg-turbo ==== Version update (1.4.0 -> 1.4.2) Subpackages: libjpeg8 libjpeg8-32bit libturbojpeg0 - Update to version 1.4.2 + Crash fixes + clang compatibility fixes + See the included ChangeLog.txt for the details - Drop libjpeg-turbo-1.4.0-int32.patch, not needed anymore. - Drop libjpeg-turbo-remove-test.patch, fixed upstream. ==== libjpeg62-turbo ==== Subpackages: libjpeg62 libjpeg62-devel - Update to version 1.4.2 + Crash fixes + clang compatibility fixes + See the included ChangeLog.txt for the details - Drop libjpeg-turbo-1.4.0-int32.patch, not needed anymore. ==== liborcus ==== Version update (0.9.2 -> 0.11.0) - Version update to 0.11.0: * Use mdds 1.0 * Use ixion 0.11 * Use python3 instead of python2 ==== libpsl ==== Version update (0.12.0 -> 0.13.0) - libpsl 0.13.0: * Use tests.txt as PSL test file by default * Slightly shorter DAFSA array when sorting input * Check for python 2.7+ in configure.ac * Fix python3 incompatibilities in make_dafsa.py ==== libreoffice ==== Subpackages: libreoffice-base libreoffice-base-drivers-mysql libreoffice-branding-upstream libreoffice-calc libreoffice-calc-extensions libreoffice-draw libreoffice-filters-optional libreoffice-gnome libreoffice-icon-theme-breeze libreoffice-icon-theme-galaxy libreoffice-icon-theme-hicontrast libreoffice-icon-theme-oxygen libreoffice-icon-theme-sifr libreoffice-icon-theme-tango libreoffice-impress libreoffice-kde4 libreoffice-l10n-cs libreoffice-l10n-da libreoffice-l10n-de libreoffice-l10n-el libreoffice-l10n-en libreoffice-l10n-es libreoffice-l10n-fr libreoffice-l10n-hu libreoffice-l10n-it libreoffice-l10n-ja libreoffice-l10n-pl libreoffice-l10n-ru libreoffice-mailmerge libreoffice-math libreoffice-pyuno libreoffice-writer libreoffice-writer-extensions - Add patch to build with liborcus 0.11 * 0001-liborcus-0.11.patch - Use mdds-1.0 * 0001-mdds-1.0.patch - Appdatastore is everywhere - Add upstreamed patches to fix patch application on sle11: * 0001-Fix-patch-to-apply-on-SLE11-just-some-unknown-patch-.patch * 0001-Update-etonyek-patch-to-apply-with-sle11-patch.patch * 0001-Fix-python2-build-of-pyuno-with-older-py2-versions.patch - Localy disable the services test that SEGVs on sle11 * libreoffice-disable-services-check.patch - Do not bother with kde integration on SLE12 ==== libsrtp ==== Version update (1.5.3 -> 1.5.4) - Update to 1.5.4: * Use BE byte ordering of RTCP trailer. * Allow zero length payload on unprotect. ==== libstorage ==== Version update (2.25.35 -> 2.25.36) Subpackages: libstorage-ruby libstorage6 - Add PowerNV support (boo#970582) - 2.25.36 ==== libvirt-python ==== Version update (1.3.1 -> 1.3.2) - Update to 1.3.2 - Add all new APIs and constants in libvirt 1.3.2 ==== llvm ==== Version update (3.7.0 -> 3.8.0) Subpackages: libLLVM libLLVM-32bit - Comment out glibc-2.23-libcxx.patch until glibc 2.23 actually hits the Factory. - Update to llvm 3.8.0 * See http://llvm.org/releases/3.8.0/docs/ReleaseNotes.html and http://llvm.org/releases/3.8.0/tools/clang/docs/ReleaseNotes.html - Fold lldb build into llvm and disable python support - Drop clang-disable-ada-extension.patch, libcxxabi-exceptions.patch and cmake-host-triple.patch - Add revert-cmake-soname.patch to fix soname handling - Add glibc-2.23-libcxx.patch to fix test failures with glibc 2.23 ==== lvm2 ==== Subpackages: device-mapper device-mapper-32bit - not output error message inside retry loops to avoid noisy error message being output inside retry loops in case of remove failure because device busy. (bsc#940298 boo#957059) add: libdm-iface-not-output-error-message-inside-retry-loop.patch ==== mc ==== Version update (4.8.15 -> 4.8.16) Subpackages: mc-lang - Update to 4.8.16: Core Support for ash + bugfixes for bash, fish (#2742) Find file: empty file name matches any file name (#3593) Find file: empty value of "Content" is used instead of "Search for content" checkbox to disable search for content (#3594) Listbox: don't wraparound on mouse scroll (#3554) Internals: Listbox: various fixups (#3569: #3562, #3563, #3565, #3161) Split MSG_ACTION into MSG_ACTION and MSG_NOTIFY (#3566) VFS Support lzip compression format (#2673, #1541) Support lz4 compression format (#3523) patchfs: support xz compression (#3443) Update uc1541 version (#3527) Add mc.ext patterns for initramfs / initrd (#3115) Editor Add golang syntax (MidnightCommander?/mc#84) Update Puppet syntax (MidnightCommander?/mc#86) Misc Code cleanup (#3555, #3547, #3587) Better subshell documentation (#3556) Fixes to the English man pages by Denys Vlasenko Fixes Insufficient quoting in mc.menu (#2947) Broken ./configure --without-internal-edit (#3601) Memory leaks (#3547, #3561, #3567, #3572) No preallocation if appending during file copy (#3577) Cannot set mini-format for "brief" listing type (#3588) Info panel: incorrect inode information in some cases (#3214) Info panel: wrong device name with symbolic link (#3412) Info panel: buffer overflow (#3582) Regression: match filename, not full path in mc.ext (#3578) Broken case insensitive search in non-unicode locale (#3491) Error message prefixed with no sense "0:" (#3269) mcedit: buffer overflow (#3579) mcedit: "Lower case selection" command in User Menu (#3586) mcedit: close on ctrl-g (#3557) mcview: "Not found" result isn't reported in some cases (#3543) VFS: isofs doesn't show .dotfiles (#3537) VFS: isofs: cannot copy file from iso when Joliet without RockRidge? is used (#2851) VFS: extfs/unzip: enter into zip file fails with "inconsistent extfs archive" (#3433) VFS: SFTP: various bugs (#3581) VFS: FISH: provide major/minor info for block/char devices (#3599) Bashism in gitfs+ extfs helper (#3379) Non-portable invocation of man (#3509) mc-wrapper leaves MC_USER set (#3550) Broken silent opening of files in background (#3574) Run identify on JPEGs even if exif is not installed (#3568) - rebased a bunch of patches ==== mediastreamer2 ==== Version update (2.12.0 -> 2.12.1) Subpackages: libmediastreamer_base6 libmediastreamer_voip6 - Update to 2.12.1: * Fix crash in MKV recorder. * Fix I-frame request when starting MKV recording. - Use tarball signing. ==== mozilla-nspr ==== Version update (4.11 -> 4.12) Subpackages: mozilla-nspr-devel - update to version 4.12 * added a PR_GetEnvSecure function, which attempts to detect if the program is being executed with elevated privileges, and returns NULL if detected. It is recommended to use this function in general purpose library code. * fixed a memory allocation bug related to the PR_*printf functions * exported API PR_DuplicateEnvironment, which had already been added in NSPR 4.10.9 * added support for FreeBSD aarch64 * several minor correctness and compatibility fixes ==== mozilla-nss ==== Version update (3.21 -> 3.21.1) Subpackages: libfreebl3 libsoftokn3 mozilla-nss-certs mozilla-nss-devel mozilla-nss-tools - update to NSS 3.21.1 (bmo#969894) * required for Firefox 45.0 * MFSA 2016-35/CVE-2016-1950 (bmo#1245528) Buffer overflow during ASN.1 decoding in NSS (fixed by requiring 3.21.1) * MFSA 2016-36/CVE-2016-1979 (bmo#1185033) Use-after-free during processing of DER encoded keys in NSS (fixed by requiring 3.21.1) ==== obs-service-set_version ==== - Update to version 0.5.3: + Use old version from testing data instead of hardcoding + Fix replacement of empty tags + Fix empty version checks for debian/changelog + fix when switching from .dev to non-dev version ==== ocfs2-tools ==== - Add bnc#96864-ocfs2console-fix-starting-failure.patch ==== oniguruma ==== - remove ruby build requires. seems unused. ==== opencc ==== Version update (1.0.3 -> 1.0.3.1) Subpackages: libopencc2 opencc-data - update version 1.0.3.1 ==== orc ==== Version update (0.4.24 -> 0.4.25) Subpackages: liborc-0_4-0 liborc-0_4-0-32bit - Update to version 0.4.25: + compiler: also prefer the backup function when no target, instead of trying to use emulation which is usually slower. + executor: fix load of parameters smaller than 64 bits, fixing crashes on ldresnearb and friends in emulated code. + test-limits: improve test without target. + Only check for Android's liblog on Android targets, so we don't accidentally pick up another liblog that may exist elsewhere. + Don't require libtool for uninstalled setups (-uninstalled pkg-config file). + Make -Bsymbolic check in configure work with clang. + Coverity code analyser fixes. + docs: update generated opcode tables. + Add orc_version_string() function and make orcc check the liborc that is being picked up to make sure the right lib is being used. ==== perl-Capture-Tiny ==== Version update (0.30 -> 0.36) - updated to 0.36 see /usr/share/doc/packages/perl-Capture-Tiny/Changes 0.36 2016-02-28 21:36:57-05:00 America/New_York [Docs] - Fixed typos. 0.34 2016-02-18 23:26:13-05:00 America/New_York [Fixed] - Removed spurious JSON::PP dependency added by a broken Dist::Zilla plugin. 0.32 2016-02-18 10:12:02-05:00 America/New_York [Docs] - Changed internal formatting of documentation [Changes] - No functional changes from 0.31 0.31 2016-02-14 07:33:50-07:00 America/Mazatlan (TRIAL RELEASE) [Fixed] - Application of layers to handles during and after capture now attempts to more accurately duplicate the original layers, including potential duplicate layers. Because of the unusual ways that layers are ordered and applied, exact duplication is not guaranteeed, but this should be better that what Capture::Tiny did before. - Avoids a hard crash on Windows with Perl < 5.20 if a fork occurs in a capture block. Also documented the risks and lack of support for forks in capture blocks. ==== perl-Date-Manip ==== Version update (6.52 -> 6.53) - updated to 6.53 see /usr/share/doc/packages/perl-Date-Manip/Changes ==== perl-DateTime ==== Version update (1.21 -> 1.25) - updated to 1.25 see /usr/share/doc/packages/perl-DateTime/Changes 1.25 2016-03-06 - DateTime->from_object would die if given a DateTime::Infinite object. Now it returns another DateTime::Infinite object. Reported by Greg Oschwald. RT [#112712]. 1.24 2016-02-29 - The last release partially broke $dt->time. If you passed a value to use as unit separator, this was ignored. Reported by Sergiy Zuban. RT #112585. 1.23 2016-02-28 - Make all DateTime::Infinite objects return the system's representation of positive or negative infinity for any method which returns a number of string representation (year(), month(), ymd(), iso8601(), etc.). Previously some of these methods could return "Nan", "-Inf--Inf--Inf", and other confusing outputs. Reported by Greg Oschwald. RT #110341. 1.22 2016-02-21 (TRIAL RELEASE) - Fixed several issues with the handling of non-integer values passed to from_epoch(). This method was simply broken for negative values, which would end up being incremented by a full second, so for example -0.5 became 0.5. The method did not accept all valid float values. Specifically, it did not accept values in scientific notation. Finally, this method now rounds all non-integer values to the nearest millisecond. This matches the precision we can expect from Perl itself (53 bits) in most cases. Patch by Christian Hansen. GitHub #11. ==== perl-DateTime-TimeZone ==== Version update (1.95 -> 1.96) - updated to 1.96 see /usr/share/doc/packages/perl-DateTime-TimeZone/Changes 1.96 2016-03-15 - This release is based on version 2016b of the Olson database. This release includes contemporary changes for Russia, Haiti, and Palestine. ==== perl-Devel-StackTrace ==== Version update (2.00 -> 2.01) - updated to 2.01 see /usr/share/doc/packages/perl-Devel-StackTrace/Changes 2.01 2016-03-02 - Fixed the frames method when it is called with arguments. Previously this did not work if it was called before the method was called as a reader. Fixed by Mark Fowler. PR #8. ==== perl-MIME-Types ==== Version update (2.12 -> 2.13) - updated to 2.13 see /usr/share/doc/packages/perl-MIME-Types/ChangeLog version 2.13: Mon 7 Mar 15:48:28 CET 2016 Fixes: - not all information was extracted from the Apache tables. [Thomas Eckardt] ==== perl-Net-DNS ==== Version update (1.04 -> 1.05) - updated to 1.05 see /usr/share/doc/packages/perl-Net-DNS/Changes ==== perl-Perl-Tidy ==== Version update (20150815 -> 20160302) - updated to 20160302 see /usr/share/doc/packages/perl-Perl-Tidy/CHANGES 2016 03 02 - RT #112534. Corrected a minor problem in which an unwanted newline was placed before the closing brace of an anonymous sub with a signature, if it was in a list. Thanks to Dmytro Zagashev. - Corrected a minor problem in which occasional extra indentation was given to the closing brace of an anonymous sub in a list when the -lp parameter was set. 2016 03 01 - RT #104427. Added support for signatures. - RT #111512. Changed global warning flag $^W = 1 to use warnings; Thanks to Dmytro Zagashev. - RT #110297, added support for new regexp modifier /n Thanks to Dmytro Zagashev. - RT #111519. The -io (--indent-only) and -dac (--delete-all-comments) can now both be used in one pass. Thanks to Dmitry Veltishev. - Patch to avoid error message with 'catch' used by TryCatch, as in catch($err){ [#] do something } Thanks to Nick Tonkin. - RT #32905, UTF-8 coding is now more robust. Thanks to qsimpleq and Dmytro for patches. - RT #106885. Added string bitwise operators ^. &. |. ~. ^.= &.= |.= - Fixed RT #107832 and #106492, lack of vertical alignment of two lines when -boc flag (break at old commas) is set. This bug was inadvertantly introduced in previous bug fix RT #98902. - Some common extensions to Perl syntax are handled better. In particular, the following snippet is now foratted cleanly: method deposit( Num $amount) { $self->balance( $self->balance + $amount ); } A new flag -xs (--extended-syntax) was added to enable this, and the default is to use -xs. In previous versions, and now only when -nxs is set, this snippet of code generates the following error message: "syntax error at ') {', didn't see one of: case elsif for foreach given if switch unless until when while" ==== perl-RPC-XML ==== Version update (0.78 -> 0.79) - update to 0.79 Test clean-up/fixes to address CPAN test failures. Should address problems with having IO::Socket::IP acting in place of IO::Socket::INET and also address some issues with a dynloader bug being triggered by t/70_compression_detect.t. - possibly obsoleting RPC-XML-0.60-rev127.dif - add RPC-XML-0.78-reproducible.diff to remove date from build result ==== perl-Readonly ==== Version update (2.00 -> 2.01) - updated to 2.01 see /usr/share/doc/packages/perl-Readonly/Changes 2.01 2016-02-24T16:01:12Z - Disallow initialization of Readonly variables by assignment allowed by Perl prototype changes in v5.16. Assignment initialization of scalars sets scalar variables to undef and lists and hashes initialized by assignment are not read only. ==== perl-XML-LibXML ==== Version update (2.0123 -> 2.0124) - updated to 2.0124 see /usr/share/doc/packages/perl-XML-LibXML/Changes 2.0124 2016-02-27 - Fix XML::LibXML::Text->attributes() to return an empty list in list context. - https://rt.cpan.org/Ticket/Display.html?id=112470 - Thanks to Rob Dixon for the report. ==== perl-XML-XPath ==== Version update (1.31 -> 1.33) - updated to 1.33 see /usr/share/doc/packages/perl-XML-XPath/Changes 1.33 2016-03-02 MANWAR - Fixed issue RT #112584 (use of /d modifier in transliteration operator). 1.32 2016-02-23 MANWAR - Applied the following patches kindly provided by GREGOA: https://anonscm.debian.org/cgit/pkg-perl/packages/libxml-xpath-perl.git/tre… https://anonscm.debian.org/cgit/pkg-perl/packages/libxml-xpath-perl.git/tre… https://anonscm.debian.org/cgit/pkg-perl/packages/libxml-xpath-perl.git/tre… ==== pesign-obs-integration ==== - Add aarch64 support since pesign also build on aarch64 ==== pfstools ==== Subpackages: libpfs2 pfscalibration pfstmo - Disable pfscalign subpackage to fix build. It depends on non-free opencv - Disable opencv support because it depends on non-free part. ==== php5 ==== Version update (5.6.18 -> 5.6.19) Subpackages: apache2-mod_php5 php5-bcmath php5-bz2 php5-calendar php5-ctype php5-curl php5-dba php5-devel php5-dom php5-exif php5-fastcgi php5-ftp php5-gd php5-gettext php5-gmp php5-iconv php5-imap php5-json php5-ldap php5-mbstring php5-mcrypt php5-mysql php5-odbc php5-openssl php5-pdo php5-pear php5-pear-Archive_Tar php5-pgsql php5-shmop php5-snmp php5-sockets php5-sqlite php5-suhosin php5-sysvsem php5-sysvshm php5-tidy php5-tokenizer php5-wddx php5-xmlreader php5-xmlwriter php5-xsl php5-zip php5-zlib - updated to 5.6.19: This is a security release in which several security bugs were fixed. ==== plasma-framework ==== Version update (5.19.0 -> 5.20.0) Subpackages: plasma-framework-components plasma-framework-private - Update to 5.20.0 (boo#970856) * IconItem: Don't overwrite source when using QIcon::name() * ContainmentInterface: Fix use of QRect right() and bottom() * Remove effectively duplicate code path for handling QPixmaps * Add API docs for IconItem * Fix stylesheet (kde#359345) * Don't wipe window mask on every geometry change when compositing is active and no mask has been set * Applet: Don't crash on remove panel (kde#345723) * Theme: Discard pixmap cache when changing theme (kde#359924) * IconItemTest: Skip when grabToImage fails * IconItem: Fix changing color of svg icons loaded from icon theme * Fix svg iconPath resolving in IconItem * If path is passed, pick the tail (kde#359902) * Add properties configurationRequired and reason * Move contextualActionsAboutToShow to Applet * ScrollViewStyle: Do not use margins of the flickable item * DataContainer: Fix slot checks before connect/disconnect * ToolTip: Prevent multiple geometry changes while changing contents * SvgItem: Don't use Plasma::Theme from rendering thread * AppletQuickItem: Fix finding own attached layout (kde#358849) * Smaller expander for the taskbar * ToolTip: Stop show timer if hideTooltip is called (kde#358894) * Disable animation of icons in plasma tooltips * Drop animations from tooltips * Default theme follows color scheme * Fix IconItem not loading non-theme icons with name (kde#359388) * Prefer other containments than desktop in containmentAt() * WindowThumbnail: Discard glx pixmap in stopRedirecting() (kde#357895) * Remove the legacy applets filter * ToolButtonStyle: Don't rely on an outside ID * Don't assume we find a corona (kde#359026) * Calendar: Add proper back/forward buttons and a "Today" button (kde#336124, kde#348362, kde#358536) * For more details please see: https://www.kde.org/announcements/kde-frameworks-5.20.0.php - Drop upstreamed patches: 0001-Theme-Discard-pixmap-cache-when-changing-theme.patch 0001-if-path-is-passed-pick-the-tail.patch fix-IconItem-regression.patch kde357895.patch - Added loosen-up-kactivities-requirement.patch -- require kactivities 5.19.0, as we can't update kactivities5 to 5.20.0 before Plasma 5.6.0 ==== plasma5-desktop ==== - Added use-correct-kf5-var.patch: honour toplist CMakeLists requirement for KF5, instead of pulling it in from FindKF5 module ==== postgresql94 ==== Version update (9.4.5 -> 9.4.6) Subpackages: postgresql94-contrib postgresql94-docs postgresql94-server - Security and bugfix release 9.4.6: * *** IMPORTANT *** Users of version 9.4 will need to reindex any jsonb_path_ops indexes they have created, in order to fix a persistent issue with missing index entries. * Fix infinite loops and buffer-overrun problems in regular expressions (CVE-2016-0773, bsc#966436). * Fix regular-expression compiler to handle loops of constraint arcs (CVE-2007-4772). * Prevent certain PL/Java parameters from being set by non-superusers (CVE-2016-0766, bsc#966435). * Fix many issues in pg_dump with specific object types * Prevent over-eager pushdown of HAVING clauses for GROUPING SETS * Fix deparsing error with ON CONFLICT ... WHERE clauses * Fix tableoid errors for postgres_fdw * Prevent floating-point exceptions in pgbench * Make \det search Foreign Table names consistently * Fix quoting of domain constraint names in pg_dump * Prevent putting expanded objects into Const nodes * Allow compile of PL/Java on Windows * Fix "unresolved symbol" errors in PL/Python execution * Allow Python2 and Python3 to be used in the same database * Add support for Python 3.5 in PL/Python * Fix issue with subdirectory creation during initdb * Make pg_ctl report status correctly on Windows * Suppress confusing error when using pg_receivexlog with older servers * Multiple documentation corrections and additions * Fix erroneous hash calculations in gin_extract_jsonb_path() - For the full release notse, see: http://www.postgresql.org/docs/9.4/static/release-9-4-6.html - PL/Perl still needs to be linked with rpath, so that it can find libperl.so at runtime. bsc#578053, postgresql-plperl-keep-rpath.patch ==== postgresql94-libs ==== Version update (9.4.5 -> 9.4.6) Subpackages: libecpg6 libpq5 libpq5-32bit postgresql94-devel - Security and bugfix release 9.4.6: * *** IMPORTANT *** Users of version 9.4 will need to reindex any jsonb_path_ops indexes they have created, in order to fix a persistent issue with missing index entries. * Fix infinite loops and buffer-overrun problems in regular expressions (CVE-2016-0773, bsc#966436). * Fix regular-expression compiler to handle loops of constraint arcs (CVE-2007-4772). * Prevent certain PL/Java parameters from being set by non-superusers (CVE-2016-0766, bsc#966435). * Fix many issues in pg_dump with specific object types * Prevent over-eager pushdown of HAVING clauses for GROUPING SETS * Fix deparsing error with ON CONFLICT ... WHERE clauses * Fix tableoid errors for postgres_fdw * Prevent floating-point exceptions in pgbench * Make \det search Foreign Table names consistently * Fix quoting of domain constraint names in pg_dump * Prevent putting expanded objects into Const nodes * Allow compile of PL/Java on Windows * Fix "unresolved symbol" errors in PL/Python execution * Allow Python2 and Python3 to be used in the same database * Add support for Python 3.5 in PL/Python * Fix issue with subdirectory creation during initdb * Make pg_ctl report status correctly on Windows * Suppress confusing error when using pg_receivexlog with older servers * Multiple documentation corrections and additions * Fix erroneous hash calculations in gin_extract_jsonb_path() - For the full release notse, see: http://www.postgresql.org/docs/9.4/static/release-9-4-6.html - PL/Perl still needs to be linked with rpath, so that it can find libperl.so at runtime. bsc#578053, postgresql-plperl-keep-rpath.patch ==== pstoedit ==== - Add reproducible.patch to make build-compare work ==== python-Pillow ==== Version update (3.1.0 -> 3.1.1) Subpackages: python-Pillow-tk - ignore make check errors ppc64 architecture as upstream issue https://github.com/python-pillow/Pillow/issues/1204 - update to version 3.1.1 with security fixes: * Fixed an integer overflow in Resample.c causing writes in the Python heap. * Fixed a buffer overflow in PcdDecode.c causing a segfault when opening PhotoCD files. CVE-2016-TBD * Fixed a buffer overflow in FliDecode.c causing a segfault when opening FLI files. CVE-2016-0775 (fixes bsc#965582) * Fixed a buffer overflow in TiffDecode.c causing an arbitrary amount of memory to be overwritten when opening a specially crafted invalid TIFF file. CVE-2016-0740 (fixes bsc#965579) ==== python-lxml ==== Version update (3.4.4 -> 3.5.0) - update to version 3.5.0: * Unicode string results failed XPath queries in PyPy. * LP#1497051: HTML target parser failed to terminate on exceptions and continued parsing instead. * Deprecated API usage in doctestcompare. - changes from version 3.5.0b1: * cleanup_namespaces() accepts a new argument keep_ns_prefixes that does not remove definitions of the provided prefix-namespace mapping from the tree. * cleanup_namespaces() accepts a new argument top_nsmap that moves definitions of the provided prefix-namespace mapping to the top of the tree. * LP#1490451: Element objects gained a cssselect() method as known from lxml.html. Patch by Simon Sapin. * API functions and methods behave and look more like Python functions, which allows introspection on them etc. One side effect to be aware of is that the functions now bind as methods when assigned to a class variable. A quick fix is to wrap them in staticmethod() (as for normal Python functions). * ISO-Schematron support gained an option error_finder that allows passing a filter function for picking validation errors from reports. * LP#1243600: Elements in lxml.html gained a classes property that provides a set-like interface to the class attribute. Original patch by masklinn. * LP#1341964: The soupparser now handles DOCTYPE declarations, comments and processing instructions outside of the root element. Patch by Olli Pottonen. * LP#1421512: The docinfo of a tree was made editable to allow setting and removing the public ID and system ID of the DOCTYPE. Patch by Olli Pottonen. * LP#1442427: More work-arounds for quirks and bugs in pypy and pypy3. * lxml.html.soupparser now uses BeautifulSoup version 4 instead of version 3 if available. * Memory errors that occur during tree adaptations (e.g. moving subtrees to foreign documents) could leave the tree in a crash prone state. * Calling process_children() in an XSLT extension element without an output_parent argument failed with a TypeError. Fix by Jens Tr�ger. * GH#162: Image data in HTML data URLs is considered safe and no longer removed by lxml.html.clean JavaScript cleaner. * GH#166: Static build could link libraries in wrong order. * GH#172: Rely a bit more on libxml2 for encoding detection rather than rolling our own in some cases. Patch by Olli Pottonen. * GH#159: Validity checks for names and string content were tightened to detect the use of illegal characters early. Patch by Olli Pottonen. * LP#1421921: Comments/PIs before the DOCTYPE declaration were not serialised. Patch by Olli Pottonen. * LP#659367: Some HTML DOCTYPE declarations were not serialised. Patch by Olli Pottonen. * LP#1238503: lxml.doctestcompare is now consistent with stdlib's doctest in how it uses + and - to refer to unexpected and missing output. * Empty prefixes are explicitly rejected when a namespace mapping is used with ElementPath to avoid hiding bugs in user code. * Several problems with PyPy were fixed by switching to Cython 0.23. ==== python-packaging ==== Version update (15.3 -> 16.5) - update to 16.5: * Fix a regression in parsing requirements with whitespaces between the comma separators. * Fix a regression in parsing requirements like ``foo (==4)``. * Fix a bug where ``packaging.requirements:Requirement`` was overly strict when matching legacy requirements. * Add a function that implements the name canonicalization from PEP 503. * Implement requirement specifiers from PEP 508. * Relicense so that packaging is available under *either* the Apache License, Version 2.0 or a 2 Clause BSD license. * Support installation of packaging when only distutils is available. * Fix ``==`` comparison when there is a prefix and a local version in play. (:issue:`41`). * Implement environment markers from PEP 508. - Adjust Requires according to requires.txt ==== python-requests ==== - update no-default-cacert.patch to simply pass empty CA path - urllib3-ssl-default-context.patch: patch bundled urllib3 to behave correctly with regard to empty CA path passed - change urllib3 fallback requirements to Recommends - use ca-certificates in SLE as well - recommend ca-certificates-mozilla to have a basic certificate set ==== python3 ==== Version update (3.4.3 -> 3.5.1) Subpackages: python3-curses python3-dbm python3-tk - Add Python-3.5.1-fix_lru_cache_copying.patch Fix copying the lru_cache() wrapper object. Fixes deep-copying lru_cache regression, which worked on previous versions of python but fails on python 3.5. This fixes a bunch of packages in devel:languages:python3. See: https://bugs.python.org/issue25447 - update to 3.5.1 * bugfix-only release, dozens of bugs fixed - Drop upstreamed Python-3.5.0-_Py_atomic_xxx-symbols.patch - "Python3" to "Python 3" in summary * This seems cleaner and fixes and rpmlint warning - Add python3-3.5.0-_Py_atomic_xxx-symbols.patch This fixes a build error for many packages that use the Python, C-API. This patch is already accepted upstream and is slated to appear in python 3.5.1. - update to 3.5.0 * see python3-base.changes for details - update list of tests ==== python3-base ==== Version update (3.4.3 -> 3.5.1) - Add Python-3.5.1-fix_lru_cache_copying.patch Fix copying the lru_cache() wrapper object. Fixes deep-copying lru_cache regression, which worked on previous versions of python but fails on python 3.5. This fixes a bunch of packages in devel:languages:python3. See: https://bugs.python.org/issue25447 - update to 3.5.1 * bugfix-only release, dozens of bugs fixed - Drop upstreamed Python-3.5.0-_Py_atomic_xxx-symbols.patch - "Python3" to "Python 3" in summary * This seems cleaner and fixes and rpmlint warning - Add Python-3.5.0-_Py_atomic_xxx-symbols.patch This fixes a build error for many packages that use the Python, C-API. This patch is already accepted upstream and is slated to appear in python 3.5.1. - update to 3.5.0 * coroutines with async/await syntax * matrix multiplication operator `@` * unpacking generalizations * new modules `typing` and `zipapp` * type annotations * .pyo files replaced by custom suffixes for optimization levels in __pycache__ * support for memory BIO in ssl module * performance improvements in several modules * and many more - removals and behavior changes * deprecated `__version__` is removed * support for .pyo files was removed * system calls are auto-retried on EINTR * bare generator expressions in function calls now cause SyntaxError (change "f(x for x in i)" to "f((x for x in i))" to fix) * removed undocumented `format` member of private `PyMemoryViewObject` struct * renamed `PyMemAllocator` to `PyMemAllocatorEx` - redefine %dynlib macro to reflect that modules now have arch+os as part of name - module `time` is now built-in - dropped upstreamed patches: python-3.4.1-fix-faulthandler.patch python-3.4.3-test-conditional-ssl.patch python-fix-short-dh.patch (also dropped dh2048.pem required for this patch) - updated patch Python-3.3.0b2-multilib.patch to Python-3.5.0-multilib.patch - python-ncurses-6.0-accessors.patch taken from python 2 to fix build failure with new gcc + ncurses ==== python3-doc ==== Version update (3.4.3 -> 3.5.1) - Add Python-3.5.1-fix_lru_cache_copying.patch Fix copying the lru_cache() wrapper object. Fixes deep-copying lru_cache regression, which worked on previous versions of python but fails on python 3.5. This fixes a bunch of packages in devel:languages:python3. See: https://bugs.python.org/issue25447 - Build the docs in .qch format as well - update to 3.5.1 * bugfix-only release, dozens of bugs fixed - Drop upstreamed Python-3.5.0-_Py_atomic_xxx-symbols.patch - "Python" to "Python 3" in summary - Add python-Sphinx version requirement (1.2) - update to 3.5.0 * see python3-base.changes for details ==== rsyslog ==== Version update (8.16.0 -> 8.17.0) - rsyslog 8.17.0: * improve json variable performance * new experimental feature: lookup table suport * new feature: dynamic statistics counters * new contributed plugin: omampq1 for AMQP 1.0-compliant brokers * new set of UTC-based $now family of variables ($now-utc, $year-utc, ...) * simplified locking when accessing message and local variables * new global parameter "debug.unloadModules" * timestamp handling: guard against invalid dates * imfile: add "trimlineoverbytes" input paramter * ommongodb: add support for extended json format for dates * omjournal: add support for templates * imuxsock: add "ruleset" input parameter * imptcp: performance improvements * improve interface definition in some modules, e.g. mmanon, mmsequence * rsgtutil: dump mode improvements + auto-detect signature file type + ability to dump hash chains for log extraction files * bugfix: unixtimestamp date format was incorrectly computed (leap year) * bugfix: date-ordinal date format was incorrectly computed (leap year) * bugfix: some race when shutting down input module threads * bugfix tcpflood: did not handle connection drops correct in TLS case * bugfix: abort if global parameter value was wrong * bugfix omkafka: fix potential NULL pointer addressing * bugfix impstats: @cee cookie was prefixed to wrong fromat (json vs. cee) * bugfix imfile: fix race during startup that could lead to some duplication * bugfix: potential loss of single message at queue shutdown * bugfix: potential deadlock with heavy variable access * bugfix ommysql: on some platforms, serverport parameter had no effect * bugfix omelasticsearch: invalid pointer dereference * bugfix omhiredis: serverport config parameter did not reliably work * bugfix rsgtutil: -h command line option did not work * bugfix lexer: hex numbers were not properly represented * bugfix TLS syslog: intermittent errors while sending data * bugfix imfile: abort on startup if no slash was present in file name param * bugfix rsgtutil: fixed abort when using short command line options * bugfix rsgtutil: invalid computation of log record extraction file * bugfix build system: KSI components could only be build if in default path ==== ruby-common ==== - Since rubygems 2.5.0 the default version in the gem bin stub changed from '>= 0' to '>= 0.a'. This was done to allow prerelease versions. Our patching script didn't take the '.a' into account and generated version fields like '= 0.10.1.a' instead of the expected '= 0.10.1'. This fix accounts for the '.a'. ==== rubygem-cheetah ==== Version update (0.4.0 -> 0.5.0) - updated to version 0.5.0 see installed CHANGELOG 0.5.0 (2015-12-18) - ----------------- * Added chroot option for executing in different system root. * Added ENV overwrite option. * Allowed to specify known exit codes that are not errors. * Documented how to execute in different working directory. * Allowed passing nil as :stdin to be same as :stdout and :strerr. * Converted parameters for command to strings with `.to_s`. * Adapted testsuite to new rspec. * Updated documentation with various fixes. * Dropped support for Ruby 1.9.3. * Added support for Ruby 2.1 and 2.2. - adapt to new rubygem packaging - updated to version 0.4.0 * Implemented incremental logging. The input and both outputs of the executed command are now logged one-by-line by the default recorder. A custom recorder can record them on even finer granularity. * Dropped support of Ruby 1.8.7. * Added support of Ruby 2.0.0. * Internal code improvements. - use gem2rpm-opensuse instead to get better result - Removed the rpmlintrc file. We should make gem2rpm to produce RPMs that pass rpmlint, not fix its bugs after the fact. - Regenerated the .spec file using gem2rpm. - Updated to version 0.3.0. - Attempted to fix rpmlint warnings produced by OBS. - Packaged version 0.2.0. ==== sac ==== - Add the jpackages-tools under conditional so we build on all distros ==== samba ==== Version update (4.3.5 -> 4.3.6) Subpackages: libdcerpc-binding0 libdcerpc-binding0-32bit libdcerpc0 libdcerpc0-32bit libgensec0 libgensec0-32bit libndr-krb5pac0 libndr-krb5pac0-32bit libndr-nbt0 libndr-nbt0-32bit libndr-standard0 libndr-standard0-32bit libndr0 libndr0-32bit libnetapi0 libnetapi0-32bit libregistry0 libsamba-credentials0 libsamba-credentials0-32bit libsamba-hostconfig0 libsamba-hostconfig0-32bit libsamba-passdb0 libsamba-passdb0-32bit libsamba-util0 libsamba-util0-32bit libsamdb0 libsamdb0-32bit libsmbclient-devel libsmbclient-raw0 libsmbclient-raw0-32bit libsmbclient0 libsmbconf0 libsmbconf0-32bit libsmbldap0 libsmbldap0-32bit libtevent-util0 libtevent-util0-32bit libwbclient0 libwbclient0-32bit samba-32bit samba-client samba-client-32bit samba-doc samba-libs samba-libs-32bit samba-winbind samba-winbind-32bit - Update to 4.3.6. + Getting and setting Windows ACLs on symlinks can change permissions on link target; CVE-2015-7560; (bso#11648); (bsc#968222). + Fix Out-of-bounds read in internal DNS server; CVE-2016-0771; (bso#11128); (bso#11686); (bsc#968223). ==== solid ==== Version update (5.19.0 -> 5.20.0) Subpackages: libKF5Solid5 solid-devel solid-imports solid-tools - Update to 5.20.0 (boo#970856) * For more details please see: https://www.kde.org/announcements/kde-frameworks-5.20.0.php ==== sonnet ==== Version update (5.19.0 -> 5.20.0) Subpackages: libKF5SonnetCore5 libKF5SonnetUi5 sonnet-devel - Update to 5.20.0 (boo#970856) * Don't disable language detection just because a language is set * Disable automatic disabling of automatic spelling by default * Fix TextBreaks * Fix Hunspell dictionary search paths missing '/' (kde#359866) * Add <app dir>/../share/hunspell to dictionary search path * For more details please see: https://www.kde.org/announcements/kde-frameworks-5.20.0.php ==== source-highlight ==== Subpackages: libsource-highlight4 - Add use-lessopen.patch: use lessopen.sh instead of lesspipe in src-hilite-lesspipe.sh, since our less package ships with lessopen.sh. ==== sqlite3 ==== Version update (3.11.0 -> 3.11.1) Subpackages: libsqlite3-0 libsqlite3-0-32bit sqlite3-devel sqlite3-doc - Fix sqlite-fts5-link.patch: link libsqlite3.so with libm instead of the sqlite3 binary: the library is the actual user of log(). - Add sqlite3-link-binary-with-libsqlite3.patch: dyamically link /usr/bin/sqlite3 to libsqlite3 instead of statically using it. - Move autoreconf call to build section, where it belongs. - Enable FTS5 support. - Add sqlite-fts5-link.patch to link to math library because FTS5 code uses log(). - SQLite 3.11.1: * Fix an FTS5 issue in which the 'optimize' command could cause index corruption. * Fix a buffer overread that might occur if FTS5 is used to query a corrupt database file. * Increase the maximum "scope" value for the spellfix1 extension from 6 to 30. - explicitly enable readline support - run spec-cleaner ==== squid ==== Version update (3.5.13 -> 3.5.15) - Changes to squid-3.5.15 (23 Feb 2016): * Bug 3870: assertion failed: String.cc: 'len_ + len <65536' in ESI::CustomParser * Fix multiple assertion on String overflows * Fix unit test errors on MacOS * Better handling of huge response headers. Fewer incorrect "Bug #3279" messages. * Log noise reduction for eCAP - Changes to squid-3.5.14 (16 Feb 2016): * Bug 4437: Fix Segfault on Certain SSL Handshake Errors * Bug 4431: C code is not compiled with CFLAGS * Bug 4418: FlexibleArray compile error with GCC 6 * Bug 4378: assertion failed: DestinationIp.cc:60: 'checklist->conn() && checklist->conn()->clientConnection != NULL' * Fix invalid FTP connection handling on blocked content * Fix handling of shared memory left over by Squid crashes or bugs * Fix mgr:config report 'qos_flows mark' output * Fix compile error in CPU affinity * Fix %un logging external ACL username * Avoid more certificate validation memory leaks * ... and some documentation updates ==== sunpinyin ==== Version update (2.0.4+git20150706.cf18102 -> 2.0.4+git20160225.844ad0f) - update to version 2.0.4+git20160225.844ad0f: + Fixed SunPinyinLookupTable::cursor_up() + slm/thread: be more tolerant when looking up a float + SLM-train.mk: publish SLM*_TEXT_FILE instead of TSLM*_TEXT_FILE. - libsunpinyin3 should requires sunpinyin-data, or the input method can't be used ==== systemd ==== Subpackages: libsystemd0 libsystemd0-32bit libudev-devel libudev1 libudev1-32bit systemd-32bit systemd-bash-completion systemd-logger systemd-sysvinit udev - Add upstream patch 0001-core-exclude-.slice-units-from-systemctl-isolate.patch this fixes forced logouts on isolate target aka changing runlevel (boo#966535) ==== talloc ==== Subpackages: libtalloc2 libtalloc2-32bit python-talloc python-talloc-32bit - Add talloc-python3.5-fix-soabi_name.patch: Do not change x86_64 to x86-64 when building with python 3.5. ==== tcl ==== Version update (8.6.4 -> 8.6.5) - New version 8.6.5: * (bug)[d87cb1] Proper tailcall from compiled ensembles * (bug)[879a07] Incomplete chars @ buffer ends * (bug)[894da1] Hang flushing blocking channels * (enhance)[b9d043] Default use of gzip transfer encoding => http 2.8.9 * ** POTENTIAL INCOMPATIBILITY *** * (bug)[9dd1bd] destructor [self] after failed constructor * (bug)[0f42ff] [tailcall] combined with [next] * (bug)[c11a51] http: race condition in -accept option * (enhance) More pure lists from compiled [list] * (enhancement) Relax memdebug constraint on extensions * (bug)[268b23] crash in traced [expr] * (bug)[478c44] Memleak in zlib compresion errors * (bug)[e770d9] Higher baud on serial channels * (update) Update Unicode data to 8.0 * ** POTENTIAL INCOMPATIBILITY *** * (bug)[a4cb3f] compiled [lreplace] handling of end * (enhance) Use Unicode SendMessageTimeout() => registry 1.3.1 * (TIP 412) msgcat dynamic locale change and package private locale => msgcat 1.6.0 * (bug)[a0ece9] crash in traced [expr] * (TIP 436) [info object isa] favors 'false' over error => TclOO 1.0.4 * (bug)[b1534b][9bad63] writes beyond buffer bounds * (bug)[a3309d] Memleak in compiled [unset a($i)] * (bug)[57945b] lock in forking/multi-threading * (bug)[3e7eca] Allocation overflow in expr parsing * (bug) Correct problems found in Coverity audit * (bug)[00189c] MSVC 14: semi-static UCRT support * (bug)[0df7a1] Tolerate getcwd() failures * (bug)[1115587][a3c350][d7ea9f][0e0e15][187d7f] Many fixes and improvements to regexp engine from Postgres * (enhance) hash lookup microoptimization * (bug)[e0a7b3] Input buffer draining & file events * (bug)[219866] Cygwin support error (yorick,nijtmans) => platform 1.0.14 * (bug)[1080042][8f2450] More regexp from Postgres * (bug)[4a0c16] [clock] react to msgcat locale change * (bug)[261a8a] Overflow segfault in I/O translation * (bug)[40f628] ListObjReplace callers fail to detect max * (enhance)[32c574] Improve list growth performance * (bug)[c9eb6b] tolerate unset ::env(TZ) * (TIP 440) tcl_platform(engine) -- Tcl implementation * (bug)[25842c] stream [zlib deflate] fails with 0 input * (bug)[3d96b7][593baa][cf74de] crashes in OO teardown * (bug)[9b4702] [info exists env(missing)] kills trace ==== texlive ==== Version update (6.2.0 -> 6.2.1) - Fix version template to get version of libtexlua52 right - Split off shared libraries and the development headers for synctex, lua52, and luajit as separate packages. - new perl-biber also requires perl module Text::Roman - Let texlive-ps2pk Obsoletes texlive-ps2pkm (boo#965472) - Also enforce fmtutil.pl to use FHS as then it will find mktexlsr.pl boo#965151 - Fix bug boo#965151 that is wrong perl syntax - Make it build even on Leap with old perl 5.18.2 - On older systems the linpoppler is somewhat to old - Be aware that LuaJIT does not build on all architectures - Update to TeXLive 2015 (timestamp 20150521 revision 26946) * Remove the now included patches biber-decode.diff biber-noreadonly.diff biblatex-biber-1.8.tar.xz source-asymptote-gs9.15.dif * Readd patch biber-certs.dif as we do not ship perls Motilla:CA * Add upstream patches biber-perl-unicode-normalize.dif biber-skip-bibtex-forms.dif * Add patch source-missed-scripts.dif to work around missed symbolic linked scripts * Adopted the following patches biber-perl-5.18.2.dif becomes biber-perl-5.22.dif biblatex-encoding.dif source-configure.dif source-dvipng.dif source-dviutils.dif source-lacheck.dif source-overflow.dif source-warns.dif source-x11r7.dif source.dif ==== texlive-specs-m ==== Version update (2014.100.svn34069 -> 2015.104.svn37789) - Handle even more unknown shebangs of scripts - Patch bbold_bbold11.dif move from texlive-specs-c to texlive-specs-b - Let texlive-ps2pk-bin Obsoletes texlive-ps2pkm-bin (boo#965472) - Add both texlive.infra and texlive.infra.doc as these provides some perl module files used by fmtutil.pl - Also enforce fmtutil.pl to use FHS as then it will find mktexlsr.pl boo#965151 - Make sure that mktexlsr.pl knows about mktex group - Fix bug boo#965151 that is wrong perl syntax - Update to TeXLive 2015 (timestamp 20150521 revision 26946) * Allow boot strapping by adding BuildIgnore for texlive * Modify kpathsea_cnf.dif * Remove leipzig.moves * Modify luaotfload_varfonts.dif * Modify musixtex_various.dif * Modify tetex_scripts.dif * Modify tex4ht_env.dif * Modify texconfig_scripts.dif ==== threadweaver ==== Version update (5.19.0 -> 5.20.0) Subpackages: libKF5ThreadWeaver5 threadweaver-devel - Update to 5.20.0 (boo#970856) * For more details please see: https://www.kde.org/announcements/kde-frameworks-5.20.0.php ==== tk ==== Version update (8.6.4 -> 8.6.5) - New version 8.6.5: * (bug)[e4ed00] [$text index "1.0 display wordstart"] crash * (bug)[562118] Unicode support of "wordstart" modifier * (bug)[06c3fc] PNG alpha error corrupted output file * (bug)[dece63] various mem corruptions in images * (bug)[53f8fc] panedwindow geometry management * (bug)[1641721] tk_getOpenFile symlink display doubled * (bug)[d7bad5][2368195][3592454][1714535][1292219][3592454] panedwindow fixes * (bug)[805cff] Tk_ConfigureWidget() segfault * (bug)[3f179a] Text widget crash with elided text * (bug)[2886436] Stop [$text delete] acting before start index * (bug)[1236306] TraverseToMenu error bound to toplevel destroy * (bug)[00189c] MSVC 14: semi-static UCRT support * (bug)[cc0ba3] PNG read buffer overflow * (bug)[1501749] Crash embedded window delete bound to <Map> * (license) Replace icons that lacked clear free license * (bug)[46c83f] Win: tk_getOpenFile -initialdir * (new feature)[TIP 437] New panedwindow options * (bug)[1669632] [text] autoseparator placement * (bug)[2262711] [text] RE search Unicode+elided * (bug)[1815161] [$text count -ypixels] needs management * (bug)[1520118] Document spinbox validate expectations * (bug)[1414025] $entry insertion cursor visibility * (bug) PNG rendering on El Capitan * (bug)[2160206] menubutton panic * (bug)[220854] Display trailing TAB in entry * (bug)[542199] double click on lone char in entry * (bug)[297442d] strict motif binding on <Control-underscore> * (bug)[3601604] $listbox -takefocus * (bug)[1997299] [text] tag borderwidth leak * (bug)[1739605] [text see] misbehavior * (bug)[ff8a1e] Never-mapped [text] performance * (bug)[1700065] Report errors from -textvariable write trace * (bug)[793909] -textvariable handle undefined namespace * (bug)[2f78c7] crash with [text] and [tablelist] * (bug)[1288433,3102228] <<ListboxSelect>> misfires * (bug)[1510538] initial scrollbar width * (bug)[1305128] event not received by scrollbar * (bug)[1927212] Mousewheel/scrollbar bindings * (bug)[2049429] get more $text options from database * (TIP 441) New option [listbox ... -justify] * (bug) OBOE in ttk::notebook options parsing * (enhance) [option readile] expects utf-8 file * (bug) crash in [$text delete] ==== tomcat ==== Subpackages: tomcat-admin-webapps tomcat-el-3_0-api tomcat-jsp-2_3-api tomcat-lib tomcat-servlet-3_1-api tomcat-webapps - update changes file for CVE information - Fixed CVEs: - CVE-2015-5346 (bnc#967814) in 8.0.32 - CVE-2015-5351 (bnc#967812) in 8.0.32 - CVE-2016-0706 (bnc#967815) in 8.0.32 - CVE-2016-0714 (bnc#967964) in 8.0.32 - CVE-2016-0763 (bnc#967966) in 8.0.32 - CVE-2015-5345 (bnc#967965) in 8.0.30 - CVE-2015-5174 (bnc#967967) in 8.0.27 ==== tracker ==== Version update (1.6.1 -> 1.6.2) Subpackages: libtracker-common-1_0 libtracker-control-1_0-0 libtracker-miner-1_0-0 libtracker-sparql-1_0-0 tracker-devel tracker-miner-files typelib-1_0-Tracker-1_0 typelib-1_0-TrackerControl-1_0 typelib-1_0-TrackerMiner-1_0 - Update to version 1.6.2: + Include embedded copy of sqlite. + tracker-extract: Fix small memory leak. + libtracker-data: Silence a CRITICAL. + Updated translations. ==== tracker-extras ==== Version update (1.6.1 -> 1.6.2) Subpackages: nautilus-extension-tracker-tags tracker-gui - Update to version 1.6.2: + Include embedded copy of sqlite. + tracker-extract: Fix small memory leak. + libtracker-data: Silence a CRITICAL. + Updated translations. ==== vim ==== Version update (7.4.1421 -> 7.4.1525) Subpackages: gvim vim-data - Switch back to GTK+2 because GTK+3 interface seems to be slower. - Updated to revision 1525, fixes the following problems * Statusline highlighting is sometimes wrong. * "J" fails if there are not enough lines. * Channel output to file not implemented yet. * Channel test is a bit flaky. * Channel with disconnected in/out/err is not supported. * Channel test: Waiting for a file to appear doesn't work. * Cannot write channel err to a buffer. * On a high resolution screen the toolbar icons are too small. - Updated to revision 1510, fixes the following problems * Crash when starting a job fails. * Keeping both a variable for a job and the channel it refers to is a hassle. * Channel test fails on AppVeyor. - Updated to revision 1506, fixes the following problems * No error message when :packadd does not find anything. * Garbage collection with an open channel is not tested. * Writing last-but-one line of buffer to a channel isn't implemented yet. * Crash when using ch_getjob(). * No test for reading last-but-one line. * When channel log is enabled get too many "looking for messages" log entries. * Job cannot read from a file. - Updated to revision 1498, fixes the following problems * ":loadplugin" is not optimal, some people find it confusing. * Not using key when result from hangul_string_convert() is NULL. * "inline" is not supported by old MSVC. * Compiler warning for unused function. * Visual-block shift breaks multi-byte characters. * No command line completion for ":packadd". * Wrong callback invoked for zero-id messages. * clr_history() does not work properly. * Crash when built with GUI but it's not active. * Cursor drawing problem with GTK 3. * Error for locked item when using json_decode(). - Updated to revision 1485, fixes the following problems * When using hangulinput with utf-8 a CSI character is misintepreted. * Function arguments marked as unused while they are not. * Test_reltime is flaky, it depends on timing. * ":loadplugin" doesn't take care of ftdetect files. * No test for ":loadplugin". * Cannot add a pack direcory without loading a plugin. * "timeout" option not supported on ch_eval*(). * A one-time callback is not used for a raw channel. * Channel "err-io" value "out" is not supported. * Job input from buffer is not implemented. - Updated to revision 1474, fixes the following problems * Sort test doesn't test with "1" argument. * Channel test sometimes fails, especially on OS/X. * Coverity reports missing restore. * Missing out-of-memory check. And Coverity warning. * Can't build without the autocommand feature. * Compiler warnings without the float feature. - Updated to revision 1467, fixes the following problems * Error when reading fails uses wrong errno. Keeping channel open after job stops results in test failing. * The "out-io" option for jobs is not implemented yet. * When encoding JSON, turning NaN and Infinity into null without giving an error is not useful. * JSON encoding doesn't handle surrogate pair. * Can't get buffer number of a channel. * Using empty name instead of no name for channel buffer. * Memory corruption when 'encoding' is not utf-8. * Crash when using json_decode(). * Memory leak when using ch_read(). * JSON tests fail if 'encoding' is not utf-8. * Json encoding still fails when encoding is not utf-8. * Vim hangs when a channel has a callback but isn't referenced. * Test 87 fails with Python 3.5. * Opening a channel with select() is not done properly. * When a JSON channel has a callback it may never be cleared. * When the argument of sort() is zero or empty it fails. ==== virtualbox ==== Version update (5.0.14 -> 5.0.16) Subpackages: virtualbox-guest-kmp-default virtualbox-guest-tools virtualbox-guest-x11 virtualbox-host-kmp-default virtualbox-qt - Version bump to 5.0.16 (released 2016-03-04 by Oracle) This is a maintenance release. The following items were fixed and/or added for Linux hosts: VMM: fixed a problem which could lead to a wrong guest behavior on AMD CPUs (tickets #14831 and #15186) GUI: prevent a crash during startup under rare conditions GUI: position off-screen windows to be fully visible again on relaunch GUI: hide the VT-x/AMD-V checkbox if raw-mode is not supported (usually Mac OS X hosts; bug #15178) PC speaker passthrough: new experimental feature, available on Linux host only Audio: properly handle default audio device changes (Windows hosts) USB: serveral fixes for the xHCI controller (e.g. for webcam passthrough) BIOS: fixed int15/AH=83/AL=00 function (4.2.0 regression) iPXE: enable the HTTP download protocol on non-Linux hosts (bug #13628) Shared folders: fixed a failure to load the saved state under certain circumstances (bug #6314) Guest Control: added support for (cached) Active Directory authentication in case the domain controller is not reachable (anymore) Serial ports: raised the number of serial ports per VM from 2 to 4 (bug #9109) SDK: make the Python webservice API binding work again (5.0 regression) Seamless mode: fixed a crash under certain circumstances (bug #15106) Linux hosts: fixed the /sbin/rcvboxdrv script as well as the missing shebang in two scripts (bugs #15055 and #15057) Linux hosts: properly uninstall Python files installed by the .run installer Windows Additions: fixed guest property enumeration of logged-in users Windows Additions: fixed sporadical failure of the graphics driver in Windows 10 guests (bug #14409) Windows Additions: under rare circumstances no mouse movement events were delivered to the guest ==== vsftpd ==== - Fix memory leaks in ls.c bnc#968138 * Add patch vsftpd-ls-memleak.patch * Update patch vsftpd-path-normalize.patch - Fix wildcard ? matching bnc#969411 * Update patch vsftpd-2.3.4-sqb.patch ==== xf86-video-intel ==== - U_tools-intel-virtual-output-Check-for-DRI3-more-carefully.patch Fix intel intel-virtual-output: check more carefully for DRI3 (boo#968598). ==== yast2 ==== Version update (3.1.176 -> 3.1.177) Subpackages: yast2-devel-doc - Added ProductFeatures.SetOverlay,ClearOverlay for System Roles (FATE#317481) - 3.1.177 ==== yast2-drbd ==== Version update (3.1.19 -> 3.1.20) - bsc#971508, many syntax change after drbdv8.4 - Syntax change: support md-flushes in disk section - Syntax change: protocol option move to net section - Syntax change: move al-extents/verify-alg from syncer section to disk/net section. - Syntax change: Support options section in conf, but no UI. - Fix gsub search in in ruby agent - Version 3.1.20 - Replace ag_drbd with new generated one by rubygem-racc 1.4.14 ==== yast2-installation ==== Version update (3.1.171 -> 3.1.172) - Added a System Role step in the installation (FATE#317481). - 3.1.172 ==== yast2-iscsi-client ==== Version update (3.1.25 -> 3.1.26) - show correct error message if host name isn't found (bsc#959292) - 3.1.26 ==== yast2-network ==== Version update (3.1.143 -> 3.1.144) - bnc#920089 - fix by Damir Porobic - fixed layout of dialog for new route definition - 3.1.144 ==== yast2-storage ==== Version update (3.1.79 -> 3.1.82) - disallow to continue with workflow when no root filesystem is assigned (bsc#967971) - 3.1.82 - Adapted the proposal settings dialog to offer encryption in a more intuitive way (fate#320418) - 3.1.81 - Removed support for flexible partitioning proposal, a feature not used in SLE or openSUSE since years (fate#320111) - 3.1.80 -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 1