August 2015 - openSUSE Factory - openSUSE Mailing Lists

[opensuse-factory] Duplicates
by ianseeks 07 Aug '15

07 Aug '15

Hi Anyone getting an increase in duplicated emails over the last few days or so? regards ian -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

5 5

[opensuse-factory] Distortet or even black screen after resuming from hibernation
by mh＠mike.franken.de 06 Aug '15

06 Aug '15

Hi *, I didn't get any reaction on this question, yet, so I try it again :) Sorry for that, but hibernating/resuming is an essential feature for me. >Changed packages: >==== Mesa ==== >Version update (10.5.7 -> 10.6.1) >Subpackages: Mesa-32bit Mesa-devel Mesa-dri-devel Mesa-libEGL-devel >Mesa-libEGL1 Mesa-libEGL1-32bit Mesa-libGL-devel Mesa-libGL1 >Mesa-libGL1-32bit Mesa-libGLESv1_CM-devel Mesa-libGLESv1_CM1 Mesa-libGLESv2-2 >Mesa-libGLESv2-devel Mesa-libglapi-devel Mesa-libglapi0 Mesa-libglapi0-32bit >libOSMesa-devel libOSMesa9 libOSMesa9-32bit libgbm-devel libgbm1 >libgbm1-32bit libvdpau_nouveau libvdpau_r300 libvdpau_r600 libvdpau_radeonsi >libwayland-egl-devel libwayland-egl1 libxatracker2 >- adjust libdrm dependencies >- Update to version 10.6.1 > * This release includes core mesa and glsl patches (amonst which > a Dota2 Reborn bugfix) affecting all dri drivers, nouveau specific Are there any known problems with these nouveau patches and some NVidia cards? My card: 01:00.0 VGA compatible controller: NVIDIA Corporation GT218 [GeForce 210] (rev a2) (prog-if 00 [VGA controller]) Subsystem: ZOTAC International (MCO) Ltd. Device 2177 Flags: bus master, fast devsel, latency 0, IRQ 28 Memory at f6000000 (32-bit, non-prefetchable) [size=16M] Memory at e0000000 (64-bit, prefetchable) [size=256M] Memory at f0000000 (64-bit, prefetchable) [size=32M] I/O ports at e000 [size=128] Expansion ROM at f7000000 [disabled] [size=512K] Capabilities: [60] Power Management version 3 Capabilities: [68] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [78] Express Endpoint, MSI 00 Capabilities: [b4] Vendor Specific Information: Len=14 <?> Capabilities: [100] Virtual Channel Capabilities: [128] Power Budgeting <?> Capabilities: [600] Vendor Specific Information: ID=0001 Rev=1 Len=024 <?> Kernel driver in use: nouveau Kernel modules: nouveau After resuming from hibernation, I see a distortet or even black screen. Never observed this before. In the log I get: [...] kernel: nouveau [ VOLT][0000:01:00.0] GPU voltage: 900000uv kernel: nouveau [ PTHERM][0000:01:00.0] fan management: automatic kernel: nouveau [ CLK][0000:01:00.0] --: core 405 MHz shader 810 MHz memory 405 MHz kernel: nouveau [ DRM] resuming client object trees... kernel: nouveau [ DRM] resuming display... kernel: nouveau [ DRM] resuming console... [...] kernel: nouveau E[plasmashell[2264]] fail set_domain kernel: nouveau E[plasmashell[2264]] validating bo list kernel: nouveau E[plasmashell[2264]] validate: -22 kernel: nouveau E[plasmashell[2264]] fail set_domain kernel: nouveau E[plasmashell[2264]] validating bo list kernel: nouveau E[plasmashell[2264]] validate: -22 kernel: nouveau E[ PGR][0000:01:00.0] magic set 0: kernel: nouveau E[ PGR][0000:01:00.0] 0x00408604: 0x2008180f kernel: nouveau E[ PGR][0000:01:00.0] 0x00408608: 0x0005fa20 kernel: nouveau E[ PGR][0000:01:00.0] 0x0040860c: 0x40000432 kernel: nouveau E[ PGR][0000:01:00.0] 0x00408610: 0x3ce00000 kernel: nouveau E[ PGR][0000:01:00.0] TRAP_TEXTURE - TP0: LINEAR_MISMATCH kernel: nouveau E[ PGR][0000:01:00.0] ch 9 [0x003f518000 plasmashell[2264]] subc 3 class 0x8597 mthd 0x0f04 data 0x3f800000 kernel: nouveau E[ PFB][0000:01:00.0] trapped read at 0x00203f3000 on channel 0x0003f518 [plasmashell[2264]] PGRAPH/TEXTURE/00 reason: PAGE_NOT_PRESENT kernel: nouveau E[ PGR][0000:01:00.0] magic set 0: kernel: nouveau E[ PGR][0000:01:00.0] 0x00408604: 0x2008140f kernel: nouveau E[ PGR][0000:01:00.0] 0x00408608: 0x00204f70 kernel: nouveau E[ PGR][0000:01:00.0] 0x0040860c: 0x40000432 kernel: nouveau E[ PGR][0000:01:00.0] 0x00408610: 0x4f700000 kernel: nouveau E[ PGR][0000:01:00.0] TRAP_TEXTURE - TP0: FAULT kernel: nouveau E[ PGR][0000:01:00.0] ch 9 [0x003f518000 plasmashell[2264]] subc 3 class 0x8597 mthd 0x108c data 0x204faaf3 kernel: nouveau E[ PFB][0000:01:00.0] trapped read at 0x002041f000 on channel 0x0003f518 [plasmashell[2264]] PGRAPH/TEXTURE/00 reason: PAGE_NOT_PRESENT kernel: nouveau E[ PGR][0000:01:00.0] magic set 0: kernel: nouveau E[ PGR][0000:01:00.0] 0x00408604: 0x20094705 kernel: nouveau E[ PGR][0000:01:00.0] 0x00408608: 0x002041f0 kernel: nouveau E[ PGR][0000:01:00.0] 0x0040860c: 0x40000432 kernel: nouveau E[ PGR][0000:01:00.0] 0x00408610: 0x41f00000 kernel: nouveau E[ PGR][0000:01:00.0] TRAP_TEXTURE - TP0: FAULT kernel: nouveau E[ PGR][0000:01:00.0] ch 9 [0x003f518000 plasmashell[2264]] subc 3 class 0x8597 mthd 0x0f04 data 0xbaf9a934 kernel: nouveau E[ PGR][0000:01:00.0] magic set 0: kernel: nouveau E[ PGR][0000:01:00.0] 0x00408604: 0x20087e0f kernel: nouveau E[ PGR][0000:01:00.0] 0x00408608: 0x00205981 kernel: nouveau E[ PGR][0000:01:00.0] 0x0040860c: 0x40000432 kernel: nouveau E[ PGR][0000:01:00.0] 0x00408610: 0x59500000 kernel: nouveau E[ PGR][0000:01:00.0] TRAP_TEXTURE - TP0: FAULT kernel: nouveau E[ PGR][0000:01:00.0] ch 9 [0x003f518000 plasmashell[2264]] subc 3 class 0x8597 mthd 0x1b0c data 0x1000f010 kernel: nouveau E[ PFB][0000:01:00.0] trapped read at 0x0020598100 on channel 0x0003f518 [plasmashell[2264]] PGRAPH/TEXTURE/00 reason: PAGE_NOT_PRESENT kernel: nouveau E[ PGR][0000:01:00.0] magic set 0: kernel: nouveau E[ PGR][0000:01:00.0] 0x00408604: 0x2008530a kernel: nouveau E[ PGR][0000:01:00.0] 0x00408608: 0x00204f68 kernel: nouveau E[ PGR][0000:01:00.0] 0x0040860c: 0x40000432 kernel: nouveau E[ PGR][0000:01:00.0] 0x00408610: 0x4f200000 kernel: nouveau E[ PGR][0000:01:00.0] TRAP_TEXTURE - TP0: FAULT kernel: nouveau E[ PGR][0000:01:00.0] ch 9 [0x003f518000 plasmashell[2264]] subc 3 class 0x8597 mthd 0x1b0c data 0x1000f010 [...] This happens with kernel 4.0.5-3 and also with 4.0.5-1! Any idea? Thx! Bye. Michael. -- Michael Hirmke -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

7 22

[opensuse-factory] can't install vmware-guest-kmp-desktop in tumbleweed: "nothing provides kernel-uname-r"
by Carlos E. R. 06 Aug '15

06 Aug '15

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, I get this: Tumbleweed:~ # zypper install vmware-guest-kmp-desktop Loading repository data... Reading installed packages... Resolving package dependencies... Problem: nothing provides kernel-uname-r = 4.0.5-3-desktop needed by vmware-guest-kmp-desktop-9.10.0_k4.0.5_3-2.2.x86_64 Solution 1: do not install vmware-guest-kmp-desktop-9.10.0_k4.0.5_3-2.2.x86_64 Solution 2: break vmware-guest-kmp-desktop-9.10.0_k4.0.5_3-2.2.x86_64 by ignoring some of its dependencies Choose from above solutions by number or cancel [1/2/c] (c): c Tumbleweed:~ # cat /etc/os-release NAME=openSUSE VERSION="20150802 (Tumbleweed)" VERSION_ID="20150802" PRETTY_NAME="openSUSE 20150802 (Tumbleweed) (x86_64)" ID=opensuse ANSI_COLOR="0;32" CPE_NAME="cpe:/o:opensuse:opensuse:20150802" BUG_REPORT_URL="https://bugs.opensuse.org" HOME_URL="https://opensuse.org/" ID_LIKE="suse" Tumbleweed:~ # Tumbleweed:~ # uname -a Linux Tumbleweed 4.1.3-2-desktop #1 SMP PREEMPT Wed Jul 29 09:47:55 UTC 2015 (41613e2) x86_64 x86_64 x86_64 GNU/Linux Tumbleweed:~ # Without those tools, I can't resize the virtual machine or copy-paste between host and guest. But I don't know what esactly is the package it is missing: "kernel-uname-r = 4.0.5-3-desktop" Maybe... the vmware-guest-kmp-desktop package is built against kernel 4.0.5-3-desktop, which is old, the current one is 4.1.3-2-desktop :-? Bug? Worth a report? - -- Cheers, Carlos E. R. -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.22 (GNU/Linux) iEYEARECAAYFAlXC0mYACgkQtTMYHG2NR9VxxACggP1R99sowcpRACVHIBHGr6SE zjAAnRfENitK2RXn6ElxobTzVetq2Mvv =BIZd -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

4 3

[opensuse-factory] Leap Freeze Point
by Douglas DeMaio 06 Aug '15

06 Aug '15

Hi all, this story was published yesterday - https://news.opensuse.org/2015/08/05/the-weekly-review-tumbleweed-and-leap/… A few takeaway items you might all be interested in regarding Leap. 61 upgraded packages were in the last snapshot and about a handful were fixes made for Leap. The roadmap for Leap will likely be published next week. It looks like the release of Leap will be on Nov. 4 at 14:00 UTC, but some other things need to happen before we confirm Nov. 4 officially as the release date. An important date that can be mentioned about Leap right now is Sept. 20. This is the tentatively the freeze point for items to be included in the Leap Beta. Artwork for Leap like Grub, Plymouth or other items can be submitted through github by cloning the Leap-42.1 branch in openSUSE branding and submit a pull request to @sysrich. A branch was also started for Tumbleweed, so anyone wanting to advance the visual appearance of both openSUSE distributions is welcome (links in the article). All the best Doug -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] snapperd
by ianseeks 06 Aug '15

06 Aug '15

hi I understand that "snapperd" is only for btrfs but its launched daily and hourly by cron even though i don't use btrfs. If this a failure of the installation process that adds these cron jobs? (i also have the bluetooth service automatically started even though i do not have any bluetooth system on my machine - i think i've dealt with that via kcm-systemd) Do we have a Plasma tool to manage crontab (there used to be a kcron if i remember correctly) ? regards Ian -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

4 15

Re: [opensuse-factory] Stability of Tumbleweed
by Richard Brown 06 Aug '15

06 Aug '15

On 5 August 2015 at 13:36, gargamel 704 <gargamel704(a)hotmail.de> wrote: > The UEFI issue not only affects installing from an USB stick! > > 1. I also tried to install in legacy mode which resulted in a very unstable > system (not sure why). > 2. When I tried to update (zypper dup) the system did hang during booting. > This alone make the issue much more severe than not being able to produce > boot sticks capable of booting in UEFI mode! > > There is a bug report for the UEFI issue in bugzilla, but there is no > visible/communicated progress on the matter. The only UEFI issue I've found is only related to USB sticks I'm talking to you from a Tumbleweed machine running UEFI (no Legacy) 2 out of 3 of my regular machines are UEFI only, and haven't had any problems on any recent snapshots So, what are the symptoms I should be experiencing? > The dependency issues are annoying but not a big issue as they usually get > sorted out quickly after flagging an issue. > One thing that has now been broken for months (at least until a couple of > days ago, not sure about the current state): The java repo. zypper complains > about broken link groups in the packages. I know I've said this before but I'll say it again If you are using additional repos, you are NOT using Tumbleweed You're using Tumbleweed with additional Repos, and the responsibility for any issues caused by those additional repos can not, and should not, be put on the shoulders of Tumbleweed This is especially dangerous when you realise most additional repos are Devel repos, which, by design and definition, should contain BROKEN things before being submitted to Tumbleweed. They're untested, they're not guaranteed to work, don't blame Tumbleweed when an additional repo has a dependency problem. Wherever possible, stick to using just Tumbleweed If you need more packages in Tumbleweed that exist in some repo somewhere, encourage the maintainer to submit them to Tumbleweed and maintain them properly. > > Suggestion: What about automating dependency issue reporting in zypper and > yast? I think we would see then probably a lot more of these reports. No, because it sounds like at least one of your dependency problem is at least partially your own fault by using non-standard repos. > Regarding the being part of the problem thing: You're completely right > there. However reporting bugs should be made very easy and non-disruptive. > KDE has for instance its own reporting tool that I used in the past for > reporting issues. The eclipse IDE also has such a tool. All o those tools > largely work without me having to do much except clicking "report bug" and I > really think this is the best approach for this. I'm sorry, but I don't buy that argument. Not everything is fixed by tooling, sometimes some people just have to do stuff Besides, the official link for reporting bugs on Tumbleweed makes the whole process pretty darn simple: http://bugzilla.opensuse.org/enter_bug.cgi?product=openSUSE+Factory&format=… from https://en.opensuse.org/openSUSE:Submitting_bug_reports -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

4 3

[opensuse-factory] No mouse under vmware player
by Carlos E. R. 05 Aug '15

05 Aug '15

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, Just installed Build0017 Tumbleweed under vmware guest, and the mouse does not respond (it works fine on other guests). There are no "/var/log/Xorg.*" files, so I don't know how to find out what the problem is, unless they are on some other place. I tried to change the default windomanager, gdm, to something else; but zypper can not find wdm nor lightdm. What else can I install? I have both gnome and xfce installed, but without mouse I can't choose. - -- Cheers, Carlos E. R. -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.22 (GNU/Linux) iEYEARECAAYFAlXCgakACgkQtTMYHG2NR9VL8ACfVnrCrMfbIkF7CSZDbSh+wQIm 1qoAn1Nesyh8l3hKiSEz9VkTodHp3Cqt =smj5 -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 1

[opensuse-factory] Removing old packages from Tumbleweed
by Freek de Kruijf 05 Aug '15

05 Aug '15

I only use "zypper up" to update Tumbleweed, because I also have other repositories like Education and KDE:Extra and obviously Packman. A "zypper dup" would install packages from the "dupped" repository, where I want to keep them from the other repositories. The drawback is apparently that obsolete packages are not removed. So I found a lot of packages using "zypper se -is" having (System Packages) as their origin, which means they are no longer available in a repository. A lot of these packages have numbers in their names which are increased in packages with the same name and are also installed, so these can be removed. I use "zypper rm -u" to remove them. Other packages had versions that were lower than the installed packages, so I downgraded these packages. Currently I do not have any package with an indication (System Packages). This is just for your information to keep your Tumbleweed system neat. -- fr.gr. member openSUSE Freek de Kruijf -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

3 4

[opensuse-factory] Chromium does not load
by C. Brouerius van Nidek 05 Aug '15

05 Aug '15

After the last update from my Tumblewood system Chromium does not load. Using konsole I get the following information: /usr/lib64/chromium/chromium: error while loading shared libraries: libffmpeg.so: cannot open shared object file: No such file or directory What is wrong and how do I repair it? -- Linux User 183145 using KDE4 and LXDE on a Pentium IV , powered by openSUSE 20150802 (x86_64) Kernel: 4.1.3-2-desktop KDE Development Platform: 4.14.10 17:07pm up 0:04, 2 users, load average: 0.99, 1.70, 0.81 -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

3 2

Re: [opensuse-factory] New Tumbleweed snapshot 20150802 released!
by deoren 05 Aug '15

05 Aug '15

On 8/4/2015 8:09 AM, Ludwig Nussel wrote: > Changed packages: It wasn't listed here, but xf86-input-libinput was updated from '0.11.0-1.2' to '0.12.0-1.1'. I'm happy to report that this is the first release in a long time which did not result in extreme mouse lag in VMware Workstation 11 until I removed or disabled '/etc/X11/xorg.conf.d/90-libinput.conf'. I compared the old file (which I renamed to *.disabled) and the new and diff reported no changes, so presumably the fix lies elsewhere. -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0