May 2015 - openSUSE Factory - openSUSE Mailing Lists

[opensuse-factory] Tumbleweed - Review of the week (2015/20)
by Dominique Leuenberger / DimStar 19 May '15

19 May '15

Dear Tumbleweed users and hackers, Week 20 has been a very busy one, and we only got you very few snapshots this week. The update comes a bit later, but it manages to include also the change that was just released on the weekend. There are two big changes that happened this week: * Ruby has been updated to version 2.2 and is now the default ruby version inside Tumbleweed. * KDE Plasma 5 is the new default, replacing KDE 4 in Tumbleweed. We understand that this is controversal to some of the users, and others very much welcome the change. Please ensure to constructively report your issues to the KDE Team (either here on list for dicscussion or by means of bug reports at https://bugzilla.opensuse.org) The currently larger change being prepared is a switch of the compiler to GCC 5.0. There are still packages failing that are part of the core set (See https://build.opensuse.org/project/show/openSUSE:Factory:Staging:A ) Once all this has been solved, I'm sure we'll also see this change happen for Tumbleweed. -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

4 4

[opensuse-factory] Wallpaper
by ianseeks 19 May '15

19 May '15

Hi I'm still trying to get my head around Plasma so you'll have to excuse my ignorance. If i right click on the "desktop" (is it still a desktop?) and select "Desktop Settings". If i go to change the "Wallpaper" to either "Desktop" or "Folder View", what am i laying the wallpaper on if its not already a desktop? regards Ian -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] Unlocking kwallet when loggin into Plasma 5.3?
by Johannes Kastl 18 May '15

18 May '15

Hi everyone, I have used a patched version of pam-config together with pam_kwallet to allow unlocking my kwallet on login. Does anyone have an idea if something similar and working is available for Plasma 5.3? I am not sure if I just misconfigured something, but I am being asked to unlock my kwallet three times after logging in. I would accept being asked once, but getting asked for each and every script I autostart is annyoing... Thanks in advance! Johannes

2 1

[opensuse-factory] Tumbleweed Plasma 5.3 closed unexpectedly
by Tom Wekell 18 May '15

18 May '15

Hi all- Am I the only one? I have this problem on two machines. After the Saturday zypper dup, I get a login box but the desktop fails to start. The first notification is krunner closed unexpectedly executable: krunner PID Signal: Aborted (6) This is followed in short order by 3 repeats of: We are sorry Plasma closed unexpectedly. Executable: plasmashell PID Signal: Aborted. I am left with the wallpaper and no menus, no keystrokes save <Ctrl><Esc> to see processes. I set aside my /kde4 directory.--no change I created a new user. -- no change How do I troubleshoot this problem? Thanks Tom -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

3 7

[opensuse-factory] Keeping track/Forecasting disk usage
by Uzair Shamim 18 May '15

18 May '15

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256 Hi all, I was wondering if anyone knew of a program I could use to keep track of disk usage as well as gather some extra information like how long the disk would fill up at its current rate (based on say the usage over the past week)? Really any interesting disk monitoring tools/scripts would be welcome, I am looking to add to my arsenal :) - -- Regards, Uzair Shamim -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iQIcBAEBCAAGBQJVWUgfAAoJEM66EOTZRH6+MegQAJpmSXR367gCff0q9QTD9/t/ L+4lEIVvjoERSOlpgd3uQ14Esp9t2u+ki8Tjtarwfk2EgxNCxiC+XQoD+kab1Lxr et7hYuXOcK22EmjFiXz8YsnPZpSY5fMt3oBARjR5qbhKvYWK0XcZ970lSxCP3gA6 D5rfFlr1RTd7icwVWwyp3EyBT4eLZCW7CBodZ/kRSup+Yk53R8hboTgQQ7if5ZDR jyqEkwtkSL5fXzwxXLNoHPDahDxMAngYj8y0DsOD1RoOC1o3N0erdnDKdhyhCzgn UEDu6hpjjSFZDjANWukTudzKTlX9rw7j7fVja4jSbwItHv1RYpZ7lgd5KLkMxnok WjVKydaUCd65PiHYei/uEGisil3WVSBuhQQew3Q2xqTFDAdQcvagHwwWqvFs4Qh9 AXB8T4IQHB/CLQm5LSg715zr6a5S57dfF9RCM1rCC2L+w2GpAfoUORjbQVBiAWmL ZBZDjP3dhKPhhCQDuiwxK6smQfUuUshQ+7Rb4fLhdL5PXBC5IQpOq8n1mPwbjtFj avh9JUvCNJpS+xwMhf5/AHpoj2mn17UaZJcTCfoLeo+7bDF2NH6Aptb8lBeQwU3J 75RG/O7xMKO9nQswrmJbnAeW9BdeA60ZRsIOyQM4Z0oF+Kuj5qPDOmisqet6I3/G gA0WyU0FT/nsHazZxP03 =MLWo -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 2

Re: [opensuse-factory] Kwallet - Kmail - agghh
by ianseeks 18 May '15

18 May '15

On Monday 18 May 2015 17:40:01 Wolfgang Bauer wrote: > Am Montag, 18. Mai 2015, 14:55:40 schrieb ianseeks: > Kmail does not automatically go and get mail even those its configured to > do > > so it waits for the interval check time then it asks for Kwallet access. > > If > > don't wait for kmail to process the time intercal and i press <Check Mail> > > it then asks for Kwallet password. > > Well, KMail is still KDE4 based, so you have to have KDE4's wallet > configured properly. > But if it worked before the upgrade, that should be the case I suppose. i had to create a new user because of a kded problem killed access to my previous user i used for mailing lists. So when i moved as much of the email structure across to the new user (so i still had my history) i recreated the kmail user accounts and thats when kwallet decided to make istself known. I googled a way to stop it and had to edit the kwalletrc file to set enabled to no and now its gone away. > > Question is, how can i get either get rid of kwallet or make it remember > > the password. I've tried using kwallet manager but it does not allow me > > to update as it, "Sorry, the system security policy didn't allow you to > > save the changes." > > That sounds like the cause of your problem. > Is your user session registered properly with logind? > loginctl should tell. It doesn;t show any errors > Maybe you have a wrong PAM configuration too? > Please check whether there are .rpmnew files in /etc/pam.d/, and also check > that you are not using the deprecated pam_unix2.so any more. > I'm not sure whether this could cause such a problem though. I've never touched pam at all, just used what comes out of the box but there is a rpmnew in the directory dated 25 Sept 2014 > > Is there a page somewhere stating what we should do if we have the > > confusing mix of Kde4 and Plasma 5 apps etc? > > I'm not aware of one, but the mix should actually be ok. So its just that some of the menu entries are pointing to the wrong version? > Kind Regards, > Wolfgang Thanks -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] Kwallet - Kmail - agghh
by ianseeks 18 May '15

18 May '15

Hi I'm one of those that did a "zypper dup" to get Plasma 5.3 and this could be a symptom of where KDE4/Plasma5 apps are all mixed up. A couple of queries here.. Kmail does not automatically go and get mail even those its configured to do so it waits for the interval check time then it asks for Kwallet access. If don't wait for kmail to process the time intercal and i press <Check Mail> it then asks for Kwallet password. Question is, how can i get either get rid of kwallet or make it remember the password. I've tried using kwallet manager but it does not allow me to update as it, "Sorry, the system security policy didn't allow you to save the changes." Is there a page somewhere stating what we should do if we have the confusing mix of Kde4 and Plasma 5 apps etc? Thanks -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 1

[opensuse-factory] Plasma 5.3 - Configure Desktop - can't use functions that require root
by ianseeks 18 May '15

18 May '15

HI Tried a few things in "Configure Desktop" that require root password to apply e.g. tried to change KDM login theme but when you press <Apply>, you get this message "Unable to authenticate/execute the action: (code 4)". I could launch Yast from "Configure Desktop" as it correctly prompts for password. I have logged a bug report regards Ian -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

3 4

[opensuse-factory] SuSEFirewall2, libvirtd and opening ports with restrictions
by Johannes Kastl 18 May '15

18 May '15

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi everyone, as I happen to try this on my tumbleweed machine, I am asking on this list. But I think the basics apply to 13.{1,2} as well. I know I can add 'special' iptables rules in /etc/sysconfig/SuSEFirewall2 for the EXT firewall zone like this: > FW_SERVICES_ACCEPT_EXT="192.168.178.2,tcp,22" This would allow only the host 192.168.178.2 to reach the machine via ssh. ############################ Question: ############################ How do I add such a special rule when I want to open the port on the virtual interfaces that libvirt uses? I have setup libvirt with a nat network, which uses virbr0. As soon as a VM is startet, another interface vnet0 appears. So basically I want to open a port on whichever of these two interfaces is the right one. Assuming that INT, EXT and DMZ are used otherwise, I know I could create an additional zone (for each of the interfaces) > FW_ZONES="libvirt" FW_DEV_libvirt="vnet0" > FW_SERVICES_ACCEPT_libvirt="192.168.2.2,tcp,22" I would also have to set FW_ROUTE to yes, otherwise the VM does not get a connection to the hosts network and no route to the whole wide world. But: This does not work in my setup. I restarted SuSEfirewall2 and libvirt services, rebooted the VM, but no, no open port. If I stop SuSEfirewall2, then the port can be reached, i.e. the ssh service is not the problem. Any hints? Is there something I'm missing? Some error in my thinking? ############################ Related question: ############################ Also, is there a way to re-add the libvirt firewall rules when SuSEfirewall2 is restarted/reloaded? Thanks in advance! Johannes -----BEGIN PGP SIGNATURE----- Comment: Using GnuPG with SeaMonkey - http://www.enigmail.net/ iEYEARECAAYFAlVOEWMACgkQzi3gQ/xETbKxpQCfTJyGZp3mEe8/zhVzON5rOTE5 S+kAnA6NmtZXXUlsKB9E5tsr4yJlH4Nm =m23+ -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

6 15

[opensuse-factory] Latest snapshot burped due to hard drive error
by John Bowling 18 May '15

18 May '15

Latest snapshot (downloaded on 5/15/2014) burped on drive error during install, but gave no informative info I could do anything about, but pointed to a report. I sent that separatly. I then tried 13.1 and got another burp. 12.2 also burped, but gave me an informative text message in a window that spell out out the drive and what the problem was. I removed that drive and then the snapshot installed correctly. Between the problem with the drive, and trying to figure out the new Kde4 it has taken all day to get back to working order. Kde4 is initially majorly different in appearance and how to set it up to be useful. Especially when I had no warning of the changes. It would be far better to do what 12.2 did with the drive glitch than what the snapshot did. One major good upgrade is in the mounting and access to USB removables. No more allowing only a few seconds to click on the box when it is inserted. -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0