December 2014 - openSUSE Factory - openSUSE Mailing Lists

[opensuse-factory] dracut takes too long to get the work done on my netbook
by jcsl 05 Dec '14

05 Dec '14

Hi. Every time I reboot my netbook after a kernel upgrade, dracut can take up to 20 minutes to finish it tasks without doing anything else. Can I remove it? I don't care if it takes longer to boot. Greetings. -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 2

[opensuse-factory] Boost 1.56 in Factory - couple failures
by Dimstar / Dominique Leuenberger 04 Dec '14

04 Dec '14

Dear Factory maintainers, Last night, boost 1.56 made it into Tumbleweed; as is almost usual by now with boost, a couple of packages (non-ring/DVD packages) break. Here a short list of the breaking ones I identified (no guarantee on completeness). Fixes for those are appreciated by all the users. Package name Devel repo -------------------------------------- avogadro KDE:Distro:Factory glom GNOME:Apps hugin graphics vegastrike games wt devel:libraries:c_c++ Not as bad as earlier boost updates :) Cheers, -- Dimstar / Dominique Leuenberger <dimstar(a)opensuse.org> -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

3 4

Re: [opensuse-factory] Wanted: Correct power-switch for ARM based Chromebook
by Dr. Werner Fink 04 Dec '14

04 Dec '14

Hi, just to be noted, that is not required to boot with openSUSE. Any nmodern Linux is enough, that is that there should be is the /sys file system and the filled /dev/input/ directory. I'd like to know the output of for n in /dev/input/event*; do udevadm info -a --name=$n done then we might catch the input device for gpio-keys.8 and the power switch therein. Werner > Le 01/10/2014 14:35, Andreas Färber a écrit : > > Hi, > Let's CC opensuse-arm for such ARM questions... > Am 30.09.2014 um 09:29 schrieb Dr. Werner Fink: > > Hi, > > just to be noted that the patch > > rules-add-lid-switch-of-ARM-based-Chromebook-as-a-power-sw.patch > > which includes the line > > SUBSYSTEM=="input", KERNEL=="event*", KERNELS=="gpio-keys.8", > > TAG+="power-switch" > > in the 70-power-switch.rules can not be fully corect. This because the > > "gpio-keys.8" > > is much to general and may cause trouble with other keyboard layouts. > > Therefore I'd like to see the output of such a Chromebook of the command: > > udevadm info -a /dev/input/by-path/*kbd > > which may give the more specific name of the power button. > > > > Werner > > Alex? Guillaume? Can any of you provide the requested information for > the Samsung Chromebook? > > From Chrome OS (kernel 3.8.11), "udevadm info -a > --name=/dev/input/by-path/*kbd" returns: > ********************************************************************** > Udevadm info starts with the device specified by the devpath and then > walks up the chain of parent devices. It prints for every device > found, all possible attributes in the udev rules key format. > A rule to match, can be composed by the attributes of the device > and the attributes from one single parent device. > > looking at device > '/devices/12ca0000.i2c/i2c-4/i2c-104/104-001e/cros-ec-keyb.3/input/input0/event0': > KERNEL=="event0" > SUBSYSTEM=="input" > DRIVER=="" > > looking at parent device > '/devices/12ca0000.i2c/i2c-4/i2c-104/104-001e/cros-ec-keyb.3/input/input0': > KERNELS=="input0" > SUBSYSTEMS=="input" > DRIVERS=="" > ATTRS{name}=="cros-ec-i2c" > ATTRS{phys}=="i2c-4-mux (chan_id 0)" > ATTRS{uniq}=="" > ATTRS{properties}=="0" > > looking at parent device > '/devices/12ca0000.i2c/i2c-4/i2c-104/104-001e/cros-ec-keyb.3': > KERNELS=="cros-ec-keyb.3" > SUBSYSTEMS=="platform" > DRIVERS=="cros-ec-keyb" > > looking at parent device '/devices/12ca0000.i2c/i2c-4/i2c-104/104-001e': > KERNELS=="104-001e" > SUBSYSTEMS=="i2c" > DRIVERS=="cros-ec-i2c" > ATTRS{name}=="cros-ec-i2c" > > looking at parent device '/devices/12ca0000.i2c/i2c-4/i2c-104': > KERNELS=="i2c-104" > SUBSYSTEMS=="i2c" > DRIVERS=="" > ATTRS{name}=="i2c-4-mux (chan_id 0)" > > looking at parent device '/devices/12ca0000.i2c/i2c-4': > KERNELS=="i2c-4" > SUBSYSTEMS=="i2c" > DRIVERS=="" > ATTRS{name}=="s3c2410-i2c" > > looking at parent device '/devices/12ca0000.i2c': > KERNELS=="12ca0000.i2c" > SUBSYSTEMS=="platform" > DRIVERS=="s3c-i2c" > ********************************************************************** > > My openSUSE SD card is currently broken, so I cannot test under openSUSE. > > > Independent of the exact GPIO key, the term "ARM based Chromebook" in > > the subject and patch name seems to be rather broad given that there's > > the original Samsung Chromebook, plus the HP Chromebook 11, plus an Acer > > Chromebook based on Tegra, plus some based on Rockchip, etc. which > > likely all use different GPIO configurations. > > Mine is a Samsung Chromebook. > > > Guillaume > -- "Having a smoking section in a restaurant is like having a peeing section in a swimming pool." -- Edward Burr

2 2

[opensuse-factory] Tumbleweed update
by Frans de Boer 04 Dec '14

04 Dec '14

Hm, the page with instructions referring to 'http://download.opensuse.org/update/tumbleweed' is incorrect. There is no such directory available. Thus, leaving tumbleweed with software lagging in versions compared to the supported main distributions. Maybe I do not understand the role of the tumbleweed/factory repositories? Are the only used for work on future releases? Not exactly what I understand of having a "rolling" release, or am I expecting to much? Regards, Frans. -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

6 10

[opensuse-factory] New Tumbleweed snapshot 20141201 released!
by Ludwig Nussel 04 Dec '14

04 Dec '14

Changed packages: ==== libdirectfb-1_7-6 ==== - Update baselibs.conf: we build libdirectfb-1_7-6. ==== PackageKit ==== Version update (1.0.1 -> 1.0.3) Subpackages: PackageKit-backend-zypp PackageKit-browser-plugin PackageKit-gstreamer-plugin PackageKit-gtk3-module libpackagekit-glib2-18 typelib-1_0-PackageKitGlib-1_0 - Update to version 1.0.3: + Libraries: glib: Add support for reinstallation and downgrades. + Backends: - hif: . Add support for reinstall and downgrade. . Use hif_context_set_vendor_cache_dir() to be smarter about the vendor cache. . Use repo loader provided by the context. - zypp: . Improve progress status. . Propagate install errors to PK. . Remap 'recommended' patches to 'BUGFIX'. + New Features: Add reinstall and downgrade support to pkcon. - Drop PackageKit-zypp-progress-info.patch: Fixed upstream. ==== PackageKit-Qt-devel ==== Version update (0.9.2 -> 0.9.5) Subpackages: libpackagekitqt4-0 - Update to version 0.9.5: + New Features: Add operator== to bitfield. + Bugfixes: - Deprecate ::packageIcon methods. - Disable namespacing and classes names on the generated interfaces. - Don't assume the target is packagekitqt5. - Fix compilation due to not-set cmake variable. - Fix documentation. - Fix QPK include dir in cmake module. - Properly export cmake targets. - Remove daemon proxy conection to changed(). - Remove RoleUpgradeSystem as it's not supported in 0.9.x anymore. - Remove the metatype registration for Transaction types. - Support RPATH by default. - Use GNUInstallDirs to determine most of used variables. - Use "PackageKit" as the include namespace rather than the library name. - Drop PackageKit-Qt-ff-7248b030c0.patch and 0001-Use-GNUInstallDirs-to-determine-most-of-used-variabl.patch: Fixed upstream/No longer needed. ==== libSDL_ttf-2_0-0 ==== - Remove self-obsoletes ==== akonadi-runtime ==== Subpackages: libakonadiprotocolinternals-devel libakonadiprotocolinternals1 - fix bashisms in post/postun scripts ==== apache2 ==== Subpackages: apache2-devel apache2-doc apache2-example-pages apache2-prefork apache2-utils - small improvement of ssl instructions [bnc#891813] ==== autoyast2 ==== Version update (3.1.66 -> 3.1.68) Subpackages: autoyast2-installation - Fixed too small dialog for autoyast profile location. (bnc#897321) - 3.1.68 - Fixed UI in partition configuration. (bnc#901904; bnc#901739) - 3.1.67 ==== bc ==== - Clean up with spec-cleaner - Add ncurses-devel as it is inherited from readline - Explicitely pass without-libedit if we decide to switch for it at some point ==== btrfsprogs ==== Version update (3.17 -> 3.17.2) Subpackages: libbtrfs0 - version 3.17.2 - check improvements - add ability to replace missing dir item/dir indexes - fix missing inode items - create missing root dirid - corrupt block: enhancements for testing fsck - zero-log: able to reset a fs with bogus log tree pointer (bko#72151) - package mkinitrd scripts conditionally (bsc#893577) - spec: minor updates - version 3.17.1 - fi df: argument handling - fix linking with libbtrfs - replace: better error reporting - fi show: fixed stall if run concurrently with balance - check: fixed argument parsing for --subvol-extents - fi df: SI prefixes corrected - Added patches: * fix-doc-build-on-SLE11SP3.diff - Removed patches: * 0042-btrfs-progs-fix-linking-with-libbtrfs.patch * 0043-btrfs-progs-libbtrfs-make-exported-headers-compatibl.patch - Modified patches: * 0011-btrfs-progs-Enhance-the-command-btrfs-filesystem-df.patch * 0012-btrfs-progs-Add-helpers-functions-to-handle-the-prin.patch * 0019-btrfs-progs-add-original-df-and-rename-disk_usage-to.patch ==== calibre ==== Version update (2.11.0 -> 2.12.0) - Update to version 2.12.0: * Edit Book: Automatically complete the closing tag in HTML/XML files when typing </ * Edit Book: Implement auto-indent, now when pressing the Enter key to start a new line, the new line's indentation is automatically created Driver for the Verso E71b ebook reader * Redesigned the 'Add a custom news source' dialog to make it easier to use, with a more powerful python editor * Make translations of the User Manual available in many different languages (fully or partially translated). Click the 'Change Language' link in the sidebar of the manual to change the language * Edit Book: Search & Replace function mode: Add a new function annotation (replace.file_order) to control what order multiple files are processed in, when doing Replace All. See the User Manual for details. * Bugfixes * Additional news sources. * For details, see http://calibre-ebook.com/whats-new ==== caribou ==== Version update (0.4.15 -> 0.4.16) Subpackages: caribou-common caribou-gtk-module-common caribou-gtk2-module caribou-gtk3-module libcaribou0 typelib-1_0-Caribou-1_0 - Update to version 0.4.16: + Stop using deprecated accessibility events ("focus:*"). + bgo#739837: Allow label overwrite in keyboard layout. + bgo#739716: Add more keys to label_map. + bgo#739711: Escape key does not work in us layout. + bgo#739526: Some buttons do not have a label. + bgo#722634: [regression] build failure: ImportError: No module named 'caribou_settings'. + Updated translations. ==== clamav ==== Version update (0.98.4 -> 0.98.5) - Version 0.98.5: * Support for the XDP file format and extracting, decoding, and scanning PDF files within XDP files. * Addition of shared library support for LLVM versions 3.1 - 3.5 for the purpose of just-in-time(JIT) compilation of ClamAV bytecode signatures. * Enhancements to the clambc command line utility to assist ClamAV bytecode signature authors by providing introspection into compiled bytecode programs. * Resolution of many of the warning messages from ClamAV compilation. * Improved detection of malicious PE files. * Security fix for ClamAV crash when using 'clamscan -a'. * Security fix for ClamAV crash when scanning maliciously crafted yoda's crypter files (bnc#906077, CVE-2013-6497). * ClamAV 0.98.5 now works with OpenSSL in FIPS compliant mode (bnc#904207). * Fix server socket setup code in clamd (bnc#903489). - Change updateclamconf to prefer the state of the old config file even for commented-out options (bnc#903719). ==== colord ==== Version update (1.2.4 -> 1.2.6) Subpackages: libcolord2 libcolorhug2 - Update to version 1.2.6: + New Features: - Allowing compile using mingw. - Make the ArgyllCMS sensor driver optional. - libcolord: . Add cd_it8_get_xyz_for_rgb(). . Add cd_it8_utils_calculate_gamma(). . Add cd_spectrum_get_resolution(). . Add cd_spectrum_get_value_raw(). . Add cd_spectrum_normalize_max(). . Add cd_spectrum_set_value(). + Bugfixes: - libcolord: . Allow a SPECTRAL_START_NM value of zero. . Always replace CCSS spectral data of the same ID. . Deep copy the spectral data when using cd_spectrum_dup(). . Fix using cd_it8_add_spectrum() where the spectra have no ID values. . Never allow duplicate CCSS IDs for small wavelength ranges. . Only set SPECTRAL_NORM when the normalisation is enabled. . Return correct values when no LUMINANCE_XYZ_CDM2 is specified. . Use double precision for SPECTRAL_START_NM and SPECTRAL_END_NM. . When using cd_it8_add_spectrum() replace any with the same ID. - Changes from version 1.2.5: + New Features: - Add a branding-less ColorHug2 figure. - Add the calculate-ccmx subcommand to cd-it8. - Install the now-useful cd-it8 helper. + Bugfixes: - Drop nb.po, its superfluous with nb_NO.po around. - Fix a crash in the session helper while calibrating. - Remove the private cd-find-broken tool. - Add argyllcms BuildRequires and Requires. ==== cups ==== Subpackages: cups-client cups-devel cups-libs cups-libs-32bit - Refresh and/or clean up the systemd units that belong to CUPS (cups.service cups.socket cups.path) via RPM posttrans scriplet in a generic way via "systemctl --force reenable" (bnc#904215). An enabled systemd unit may need a refresh via "systemctl --force reenable" after updating a package when the new package had installed a changed systemd unit file. A disabled systemd unit also may need a refresh via "systemctl --force reenable" but then it is again disabled. A systemd unit may become obsolete by updating a package when the new package does no longer provide a unit file. In this case "systemctl --force reenable" removes the unit. In any case currently running services are not stopped even when the new package does no longer provide the unit file because a RPM package update must not automatically disrupt (stop or restart) running services. ==== desktop-data-openSUSE ==== - Remove package-manager.desktop again, yast2-packager now provides yast2-packager.desktop which handles rpm files again - optimize update_rpm script and fix git URL ==== digikam ==== Version update (4.4.0 -> 4.5.0) Subpackages: digikam-doc kipi-plugins kipi-plugins-acquireimage kipi-plugins-geolocation libkface-devel libkgeomap-devel libmediawiki-devel libmediawiki1 - add obsoletes for libkface2 and libkgeomap1 - add digikam-4.5.0-reenable-libs.patch to use some internal libraries not yet available as extra packages (libkface, libkgeomap, libmediawiki) - update to 4.5.0 kde#172295 digiKam has a hard dependency on Jasper library kde#267789 Make face detection (kface) and geo tagging (kmap) optional features kde#306767 ICONVIEW : thumb focus is lost after renaming kde#315574 CORE : bad performance when Tag-related Sidebars (Tag management / Filter) are open kde#326718 Clear text button on file rename does nothing kde#326945 When build digikam from git and package libpgf is installed, no way to use internal digikam libpgf kde#337422 EXIF thumbnail date information not updated when writing metadata to image kde#337737 MYSQL : settings and installation windows freeze when valid mariadb/mysql db connection is available kde#338407 Import not showing image thumbnails for certain Canon cameras kde#339154 digiKam goes into infinite loop when working with tags/captions information tab templates kde#339180 cmake and/or compiler pick up libkgeomap header files from previous version kde#339524 Identity class miss d private container to improve binary compatibility kde#339806 Compiler error: ambiguous reference to ratio variable kde#339903 Select 'recent' albums containing MOV or .xcf(Gimp) files. Immediate crash occurs. kde#340030 KIPI-plugins can not be deactivated on non-English locales kde#340141 White Balance: Unable to specify exposure compensation > x.5 kde#340186 GROUP : Wallet icon for grouped photos is conceptually confusing kde#340295 make fails on imagedescedittab.cpp has no member named 'textEdit' kde#340439 No auto-rotation/flip Images after download kde#340443 Advanced slideshow shows not all pictures under certain conditions kde#340487 Add Album Category as a search criteria kde#340581 Ratings with rating == 0 cannot be selected on the left sidebar kde#340476 Floating Cards brings digiKam with non-English locales to crash and missing parameter text kde#340811 Wrap album caption - remove upstream patches: - kde#89156.patch - digikam-4.4.0-fix-libkexiv2-version-for-AltLangStrEdit-textEdit.patch ==== ding ==== - Remove redundant tags/sections from specfile (cf. packaging guidelines) ==== elfutils ==== Subpackages: libasm1 libdw1 libelf1 libelf1-32bit - Update homepage URL and improve RPM group classification ==== flac ==== Subpackages: flac-devel libFLAC++6 libFLAC8 libFLAC8-32bit - A couple of security fixes: * flac-fix-CVE-2014-8962.patch: arbitrary code execution by a stack overflow (CVE-2014-8692, bnc#906831) * flac-fix-CVE-2014-9028.patch: Heap overflow via specially crafted .flac files (CVE-2014-9028, bnc#907016) ==== gnutls ==== Version update (3.2.18 -> 3.2.20) Subpackages: libgnutls-devel libgnutls-openssl27 libgnutls28 libgnutls28-32bit - Updated to 3.2.20 (released 2014-11-10) * * libgnutls: Removed superfluous random generator refresh on every call of gnutls_deinit(). That reduces load and usage of /dev/urandom. * * libgnutls: Corrected issue in export of ECC parameters to X9.63 format. Reported by Sean Burford [GNUTLS-SA-2014-5]. (CVE-2014-8564 bnc#904603) - Updated to 3.2.19 (released 2014-10-13) * * libgnutls: Fixes in the transparent import of PKCS #11 certificates. Reported by Joseph Peruski. * * libgnutls: Fixed issue with unexpected non-fatal errors resetting the handshake's hash buffer, in applications using the heartbeat extension or DTLS. Reported by Joeri de Ruiter. * * libgnutls: fix issue in DTLS retransmission when session tickets were in use; reported by Manuel P�gouri�-Gonnard. * * libgnutls: Prevent abort() in library if getrusage() fails. Try to detect instead which of RUSAGE_THREAD and RUSAGE_SELF would work. * * guile: new 'set-session-server-name!' procedure; see the manual for details. ==== grep ==== Version update (2.20 -> 2.21) - GNU grep 2.21 - Improvements: * performance improved for searching files containing holes, on platforms where lseek's SEEK_DATA flag works efficiently. * performance improved for rejecting data that cannot match even the first part of a nontrivial pattern. * performance improved for very long strings in patterns. * If a file contains data improperly encoded for the current locale, and this is discovered before any of the file's contents are output, grep now treats the file as binary. * -P no longer reports an error and exits when given invalid UTF-8 data. Instead, it considers the data to be non-matching. - Bug fixes: * fix issues in multibyte locales * grep -F -x -o no longer prints an extra newline for each match. * grep in a non-UTF8 multibyte locale could mistakenly match in the middle of a multibyte character when using a '^'-anchored alternate in a pattern, leading it to print non-matching lines. * grep -F Y no longer fails to match in non-UTF8 multibyte locales * grep -E rejected unmatched ')', instead of treating it like '\)'. - Changes in behavior: * The GREP_OPTIONS environment variable is now obsolescent * In locales with multibyte character encodings other than UTF-8, grep -P now reports an error and exits instead of misbehaving. * When searching binary data, grep now may treat non-text bytes as line terminators. This can boost performance significantly. * grep -z no longer automatically treats the byte '\200' as binary data. ==== gstreamer-plugins-bad ==== Subpackages: libgstbadbase-1_0-0 libgstbadvideo-1_0-0 libgstbasecamerabinsrc-1_0-0 libgstcodecparsers-1_0-0 libgstgl-1_0-0 libgstmpegts-1_0-0 libgstphotography-1_0-0 libgsturidownloader-1_0-0 - Enable pkgconfig(libchromaprint) BuildRequires, build chromaprint plugin. ==== libgtkimageview0 ==== - Allow building with newer gdk-pixbuf: gtkimageview is legacy and will not be ported to the new API. + Remove -DGDK_PIXBUF_DISABLE_DEPRECATED and -Werror from CFLAGS. ==== hwinfo ==== Version update (21.9 -> 21.10) Subpackages: hwinfo-devel - fixed distclean target in Makefile - 21.10 ==== icedtea-web-javadoc ==== Version update (1.5.1 -> 1.5.2) - Update to 1.5.2 * NetX - RH1095311, PR574 - References class sun.misc.Ref removed in OpenJDK 9 - fixed, and so buildable on JDK9 - RH1154177 - decoded file needed from cache - fixed NPE in https dialog - empty codebase behaves as "." - Remove patch: icedtea-web-1.5.1-java9.patch * Upstreamed in this version ==== inkscape ==== Subpackages: inkscape-extensions-dia inkscape-extensions-extra inkscape-extensions-fig inkscape-extensions-gimp inkscape-extensions-skencil inkscape-lang - make inkscape-split-extensions-extra script more robust (comments, 'as' keyword, leading/trailing whitespace) ==== iso-codes ==== Version update (3.56 -> 3.57) - Update to version 3.57: + Updated translations for ISO 639-3, ISO 639-5 and ISO 3166-2. ==== java-1_8_0-openjdk-plugin ==== Version update (1.5.1 -> 1.5.2) - Update to 1.5.2 * NetX - RH1095311, PR574 - References class sun.misc.Ref removed in OpenJDK 9 - fixed, and so buildable on JDK9 - RH1154177 - decoded file needed from cache - fixed NPE in https dialog - empty codebase behaves as "." - Remove patch: icedtea-web-1.5.1-java9.patch * Upstreamed in this version ==== akonadi ==== Subpackages: akregator blogilo kaddressbook kalarm kdepim4 kjots kmail knode knotes kontact korganizer ktimetracker ktnef libkdepim4 - Fix BuildRequires of libkgapi-devel ==== kernel-default ==== Version update (3.17.2 -> 3.17.4) Subpackages: kernel-default-devel - drm/radeon: report disconnected for LVDS/eDP with PX if ddc fails (bnc#904417). - commit 2d23787 - Linux 3.17.4 (bnc#665315 bnc#903748 bnc#904289). - Refresh patches.xen/xen3-patch-3.17. - Delete patches.drivers/0010-ALSA-hda-Add-mute-LED-control-for-Lenovo-Ideapad-Z56.patch. - Delete patches.drivers/Input-synaptics-add-min-max-quirk-for-Lenovo-T440s. - Delete patches.drivers/quirk-for-Lenovo-Yoga-3-no-rfkill-switch. - commit d50009e - Linux 3.17.3 (bnc#900786). - Refresh patches.xen/xen3-patch-2.6.24. - Delete patches.fixes/iwlwifi-dvm-drop-non-VO-frames-when-flushing. - commit 76fe48f - hp_accel: Add support for HP ZBook 15 (bnc#905329). - commit 5caf82d - ALSA: hda - Add mute LED control for Lenovo Ideapad Z560 (bnc#665315). - commit ed2f271 - ALSA: hda/realtek - Change EAPD to verb control (bnc#905068). - ALSA: hda/realtek - Restore default value for ALC668 (bnc#905068). - ALSA: hda/realtek - Update Initial AMP for EAPD control (bnc#905068). - ALSA: hda/realtek - Update restore default value for ALC283 (bnc#905068). - ALSA: hda/realtek - Update restore default value for ALC282 (bnc#905068). - ALSA: hda/realtek - Use tables for batch COEF writes/updtes (bnc#905068). - ALSA: hda/realtek - Add alc_update_coef*_idx() helper (bnc#905068). - ALSA: hda/realtek - Use alc_write_coef_idx() in alc269_quanta_automake() (bnc#905068). - ALSA: hda/realtek - Optimize alc888_coef_init() (bnc#905068). - commit 757f42b ==== kernel-desktop ==== Version update (3.17.2 -> 3.17.4) Subpackages: kernel-desktop-devel - drm/radeon: report disconnected for LVDS/eDP with PX if ddc fails (bnc#904417). - commit 2d23787 - Linux 3.17.4 (bnc#665315 bnc#903748 bnc#904289). - Refresh patches.xen/xen3-patch-3.17. - Delete patches.drivers/0010-ALSA-hda-Add-mute-LED-control-for-Lenovo-Ideapad-Z56.patch. - Delete patches.drivers/Input-synaptics-add-min-max-quirk-for-Lenovo-T440s. - Delete patches.drivers/quirk-for-Lenovo-Yoga-3-no-rfkill-switch. - commit d50009e - Linux 3.17.3 (bnc#900786). - Refresh patches.xen/xen3-patch-2.6.24. - Delete patches.fixes/iwlwifi-dvm-drop-non-VO-frames-when-flushing. - commit 76fe48f - hp_accel: Add support for HP ZBook 15 (bnc#905329). - commit 5caf82d - ALSA: hda - Add mute LED control for Lenovo Ideapad Z560 (bnc#665315). - commit ed2f271 - ALSA: hda/realtek - Change EAPD to verb control (bnc#905068). - ALSA: hda/realtek - Restore default value for ALC668 (bnc#905068). - ALSA: hda/realtek - Update Initial AMP for EAPD control (bnc#905068). - ALSA: hda/realtek - Update restore default value for ALC283 (bnc#905068). - ALSA: hda/realtek - Update restore default value for ALC282 (bnc#905068). - ALSA: hda/realtek - Use tables for batch COEF writes/updtes (bnc#905068). - ALSA: hda/realtek - Add alc_update_coef*_idx() helper (bnc#905068). - ALSA: hda/realtek - Use alc_write_coef_idx() in alc269_quanta_automake() (bnc#905068). - ALSA: hda/realtek - Optimize alc888_coef_init() (bnc#905068). - commit 757f42b ==== kernel-docs ==== Version update (3.17.2 -> 3.17.4) - drm/radeon: report disconnected for LVDS/eDP with PX if ddc fails (bnc#904417). - commit 2d23787 - Linux 3.17.4 (bnc#665315 bnc#903748 bnc#904289). - Refresh patches.xen/xen3-patch-3.17. - Delete patches.drivers/0010-ALSA-hda-Add-mute-LED-control-for-Lenovo-Ideapad-Z56.patch. - Delete patches.drivers/Input-synaptics-add-min-max-quirk-for-Lenovo-T440s. - Delete patches.drivers/quirk-for-Lenovo-Yoga-3-no-rfkill-switch. - commit d50009e - Linux 3.17.3 (bnc#900786). - Refresh patches.xen/xen3-patch-2.6.24. - Delete patches.fixes/iwlwifi-dvm-drop-non-VO-frames-when-flushing. - commit 76fe48f - hp_accel: Add support for HP ZBook 15 (bnc#905329). - commit 5caf82d - ALSA: hda - Add mute LED control for Lenovo Ideapad Z560 (bnc#665315). - commit ed2f271 - ALSA: hda/realtek - Change EAPD to verb control (bnc#905068). - ALSA: hda/realtek - Restore default value for ALC668 (bnc#905068). - ALSA: hda/realtek - Update Initial AMP for EAPD control (bnc#905068). - ALSA: hda/realtek - Update restore default value for ALC283 (bnc#905068). - ALSA: hda/realtek - Update restore default value for ALC282 (bnc#905068). - ALSA: hda/realtek - Use tables for batch COEF writes/updtes (bnc#905068). - ALSA: hda/realtek - Add alc_update_coef*_idx() helper (bnc#905068). - ALSA: hda/realtek - Use alc_write_coef_idx() in alc269_quanta_automake() (bnc#905068). - ALSA: hda/realtek - Optimize alc888_coef_init() (bnc#905068). - commit 757f42b ==== kernel-devel ==== Version update (3.17.2 -> 3.17.4) Subpackages: kernel-macros kernel-source - drm/radeon: report disconnected for LVDS/eDP with PX if ddc fails (bnc#904417). - commit 2d23787 - Linux 3.17.4 (bnc#665315 bnc#903748 bnc#904289). - Refresh patches.xen/xen3-patch-3.17. - Delete patches.drivers/0010-ALSA-hda-Add-mute-LED-control-for-Lenovo-Ideapad-Z56.patch. - Delete patches.drivers/Input-synaptics-add-min-max-quirk-for-Lenovo-T440s. - Delete patches.drivers/quirk-for-Lenovo-Yoga-3-no-rfkill-switch. - commit d50009e - Linux 3.17.3 (bnc#900786). - Refresh patches.xen/xen3-patch-2.6.24. - Delete patches.fixes/iwlwifi-dvm-drop-non-VO-frames-when-flushing. - commit 76fe48f - hp_accel: Add support for HP ZBook 15 (bnc#905329). - commit 5caf82d - ALSA: hda - Add mute LED control for Lenovo Ideapad Z560 (bnc#665315). - commit ed2f271 - ALSA: hda/realtek - Change EAPD to verb control (bnc#905068). - ALSA: hda/realtek - Restore default value for ALC668 (bnc#905068). - ALSA: hda/realtek - Update Initial AMP for EAPD control (bnc#905068). - ALSA: hda/realtek - Update restore default value for ALC283 (bnc#905068). - ALSA: hda/realtek - Update restore default value for ALC282 (bnc#905068). - ALSA: hda/realtek - Use tables for batch COEF writes/updtes (bnc#905068). - ALSA: hda/realtek - Add alc_update_coef*_idx() helper (bnc#905068). - ALSA: hda/realtek - Use alc_write_coef_idx() in alc269_quanta_automake() (bnc#905068). - ALSA: hda/realtek - Optimize alc888_coef_init() (bnc#905068). - commit 757f42b ==== kernel-syms ==== Version update (3.17.2 -> 3.17.4) - drm/radeon: report disconnected for LVDS/eDP with PX if ddc fails (bnc#904417). - commit 2d23787 - Linux 3.17.4 (bnc#665315 bnc#903748 bnc#904289). - Refresh patches.xen/xen3-patch-3.17. - Delete patches.drivers/0010-ALSA-hda-Add-mute-LED-control-for-Lenovo-Ideapad-Z56.patch. - Delete patches.drivers/Input-synaptics-add-min-max-quirk-for-Lenovo-T440s. - Delete patches.drivers/quirk-for-Lenovo-Yoga-3-no-rfkill-switch. - commit d50009e - Linux 3.17.3 (bnc#900786). - Refresh patches.xen/xen3-patch-2.6.24. - Delete patches.fixes/iwlwifi-dvm-drop-non-VO-frames-when-flushing. - commit 76fe48f - hp_accel: Add support for HP ZBook 15 (bnc#905329). - commit 5caf82d - ALSA: hda - Add mute LED control for Lenovo Ideapad Z560 (bnc#665315). - commit ed2f271 - ALSA: hda/realtek - Change EAPD to verb control (bnc#905068). - ALSA: hda/realtek - Restore default value for ALC668 (bnc#905068). - ALSA: hda/realtek - Update Initial AMP for EAPD control (bnc#905068). - ALSA: hda/realtek - Update restore default value for ALC283 (bnc#905068). - ALSA: hda/realtek - Update restore default value for ALC282 (bnc#905068). - ALSA: hda/realtek - Use tables for batch COEF writes/updtes (bnc#905068). - ALSA: hda/realtek - Add alc_update_coef*_idx() helper (bnc#905068). - ALSA: hda/realtek - Use alc_write_coef_idx() in alc269_quanta_automake() (bnc#905068). - ALSA: hda/realtek - Optimize alc888_coef_init() (bnc#905068). - commit 757f42b ==== kernel-xen ==== Version update (3.17.2 -> 3.17.4) Subpackages: kernel-xen-devel - drm/radeon: report disconnected for LVDS/eDP with PX if ddc fails (bnc#904417). - commit 2d23787 - Linux 3.17.4 (bnc#665315 bnc#903748 bnc#904289). - Refresh patches.xen/xen3-patch-3.17. - Delete patches.drivers/0010-ALSA-hda-Add-mute-LED-control-for-Lenovo-Ideapad-Z56.patch. - Delete patches.drivers/Input-synaptics-add-min-max-quirk-for-Lenovo-T440s. - Delete patches.drivers/quirk-for-Lenovo-Yoga-3-no-rfkill-switch. - commit d50009e - Linux 3.17.3 (bnc#900786). - Refresh patches.xen/xen3-patch-2.6.24. - Delete patches.fixes/iwlwifi-dvm-drop-non-VO-frames-when-flushing. - commit 76fe48f - hp_accel: Add support for HP ZBook 15 (bnc#905329). - commit 5caf82d - ALSA: hda - Add mute LED control for Lenovo Ideapad Z560 (bnc#665315). - commit ed2f271 - ALSA: hda/realtek - Change EAPD to verb control (bnc#905068). - ALSA: hda/realtek - Restore default value for ALC668 (bnc#905068). - ALSA: hda/realtek - Update Initial AMP for EAPD control (bnc#905068). - ALSA: hda/realtek - Update restore default value for ALC283 (bnc#905068). - ALSA: hda/realtek - Update restore default value for ALC282 (bnc#905068). - ALSA: hda/realtek - Use tables for batch COEF writes/updtes (bnc#905068). - ALSA: hda/realtek - Add alc_update_coef*_idx() helper (bnc#905068). - ALSA: hda/realtek - Use alc_write_coef_idx() in alc269_quanta_automake() (bnc#905068). - ALSA: hda/realtek - Optimize alc888_coef_init() (bnc#905068). - commit 757f42b ==== kmix ==== - fix bashisms in kmixremote script - add patches: * kmix-4.14.3-fix-bashisms.patch ==== kmod ==== Version update (18 -> 19) Subpackages: kmod-compat libkmod2 - Move include files out of pkg/ into a normal subdir of includedir. - Update to kmod 19 * Fix missing CLOEXEC in library * Fix error message while opening kmod's index * static-nodes: when writing in tmpfiles format, indicate that creation of static nodes should only happen at boot. This is used and required by systemd-217+. ==== libjpeg-turbo ==== Subpackages: libjpeg8 libjpeg8-32bit libturbojpeg0 - security update CVE-2014-9092 [bnc#906761] * added libjpeg-turbo-CVE-2014-9092.patch ==== libjpeg62 ==== Subpackages: libjpeg62-devel - security update CVE-2014-9092 [bnc#906761] * added libjpeg-turbo-CVE-2014-9092.patch ==== libksba8 ==== Version update (1.3.1 -> 1.3.2) - libksba 1.3.2 [boo#907074] [CVE-2014-9087] This version contains a security update which fixes a buffer overflow in OID to string conversion code that can be triggered by a specially crafted S/MIME message or ECC based OpenPGP data. Users of GnuPG 2.x should install this version and restart the dirmgr process. * Fixed a buffer overflow in ksba_oid_to_str. - verify source signature ==== libqmi-glib1 ==== Subpackages: libqmi-tools - fix bashisms in qmi-network script - add patches: * libqmi-1.10.2-fix-bashisms.patch ==== libqt4 ==== Subpackages: libqt4-32bit libqt4-devel libqt4-linguist libqt4-qt3support libqt4-qt3support-32bit libqt4-sql libqt4-sql-32bit libqt4-sql-sqlite libqt4-sql-sqlite-32bit libqt4-x11 libqt4-x11-32bit - Update use-freetype-default.diff to use same method as with libqt5-qtbase package: Qt itself already does runtime check whether subpixel rendering is available, but only when FT_CONFIG_OPTION_SUBPIXEL_RENDERING is defined. Thus it is enough to only remove that condition ==== libqt4-sql-mysql ==== Subpackages: libqt4-sql-mysql-32bit libqt4-sql-postgresql libqt4-sql-postgresql-32bit libqt4-sql-unixODBC libqt4-sql-unixODBC-32bit - Update use-freetype-default.diff to use same method as with libqt5-qtbase package: Qt itself already does runtime check whether subpixel rendering is available, but only when FT_CONFIG_OPTION_SUBPIXEL_RENDERING is defined. Thus it is enough to only remove that condition - The -devel subpackage requires Mesa-devel, not only at build time - Fixed compilation on SLE_11_SP3 by making it build against Mesa-devel on that system ==== lxsession ==== Version update (0.5.1 -> 0.5.2) - New upstream version 0.5.2 * Use <binarytarget>_CPPFLAGS instead of <binarytarget>_CFLAGS * If .c files are in CLEANFILES then .stamp files should be there too * Fix FSF address (fix #697) * Fix lock in lxsession-default and add lock_manager option in lxsession-default (fix #705) * Fix gtk3 compilation, and merge patches #454 and #453 * Add .c files generated by vala, to be able to pass --enable flags * Create lock file to prevent more than one logout dialog (patch from Martin Thornton #456) * Added ESCAPE key to close the lxsession-logout menu * Add some environment variables for LXQt and Qt * Fix duplicate lxpolkit invocation by setting Hidden=true in lxpolkit.desktop. * Correctly connect and emit signals for lxsession-db (should really fix #692) * Translation updates * patches removed since now in upstream code + lxsession-0.5.1-duplicate-lxpolkit-invocation-fix.patch + lxsession-0.5.1-lxsession-db-SF692-fix.patch * Raise VALAC version requirement, it doesn't compile with 0.14, needs 0.16 * Applied spec-clean ==== libncurses5 ==== Subpackages: libncurses5-32bit libncurses6 ncurses-devel ncurses-utils tack terminfo terminfo-base - Do not use new symbol versioning as some common symbols are missed - Add ncurses patch 20141115 + improve description of limits for color values and color pairs in curs_color.3x (prompted by patch by Tim van der Molen). + add VERSION file, using first field in that to record the ABI version used for configure --with-libtool --disable-libtool-version + add configure options for applying the ".map" and ".sym" files to the ncurses, form, menu and panel libraries. + add ".map" and ".sym" files to show exported symbols, e.g., for symbol-versioning. - Add ncurses patch 20141101 + improve strict compiler-warnings by adding a cast in TRACE_RETURN and making a new TRACE_RETURN1 macro for cases where the cast does not apply. ==== iscsiuio ==== Subpackages: open-iscsi open-isns - Fixed spec file: db-devel < 5, to fix SLE 12 and SP3 builds - Fix isns server to allow legal registration sequence, including portal group (bsc#905670) ==== pesign ==== - Add pesign-fix-import-sig-check.patch to fix the signature size check while importing a signature - Amend the spec file with spec-cleaner ==== plasma-addons ==== Subpackages: plasma-addons-akonadi plasma-addons-kimpanel plasma-addons-lancelot plasma-addons-marble - fix bashisms in post/postun scripts ==== pm-utils ==== - Added fix-99Zgrub-resume.patch: fix removal of set boot entry on resume in 99Zgrub (boo#856391) ==== privoxy ==== Version update (3.0.21 -> 3.0.22) - Privoxy 3.0.22 [boo#907675] - Bug fixes: - Fixed a memory leak when rejecting client connections - Fixed an immediate-use-after-free bug and two additional unconfirmed use-after-free complaints - Actually show the FORCE_PREFIX value on the show-status page. - Properly deal with Keep-Alive headers with timeout= parameters - Not using any filter files no longer results in warning messages unless an action file is referencing header taggers or filters. - Fixed a bug that prevented Privoxy from reusing some reusable connections. - General improvements: - Introduced NO-REQUEST-TAG and NO-RESPONSE-TAG. - Add support for the 'PATCH' method as defined in RFC5789. - Reject requests with unsupported Expect header values. - Normalize the HTTP-version in forwarded requests and responses. - Server 'Keep-Alive' headers are no longer forwarded. - Change declared template file encoding to UTF-8. - Do not pass rejected keep-alive timeouts to the server. - CGI templates no longer enforce new windows for some links. - Documentation improvements - Build system improvements - Action file improvements: - The pattern 'promotions.' is no longer being blocked. - Various updated filter rules and exceptions. - Filter file improvements & bug fixes: - Decrease the chances that js-annoyances creates invalid JavaScript. - Let the msn filter hide 'related' ads again. - Prevent img-reorder from messing up img tags with empty src attributes. - add source URL - fix self-obsoletion - clean up spec file ==== python-dnspython ==== - fix build on SLE11 ==== quota ==== Version update (4.01_git201405011753 -> 4.02) Subpackages: quota-nfs - Version bump to 4.02 release * Mostly few trivial fixes. - Properly run all systemd calls on services ==== sblim-sfcb ==== - fix bashisms in scripts - add patches: * sblim-sfcb-1.4.8-fix-bashisms.patch ==== strace ==== Version update (4.8 -> 4.9) - Update to strace 4.9: * Changes in behavior * Disabled OABI support on ARM EABI systems by default, added --enable-arm-oabi option to enable it at configure time. * Improvements * Added experimental -k option to print stack trace after each traced syscall. * Added -w option to produce stats on syscall latency. (addresses Debian bug #457497). * Added ARC architecture support. * Added PTRACE_GETREGS API support on PowerPC. * Enhanced Bionic libc and musl libc support. * Enhanced tracing of x86 personality processes on x86_64 and x32. * Enhanced tracing of ARM personality processes on AArch64. * Enhanced 32/64bit personality detection on PowerPC. * Implemented decoding of add_key, ioprio_get, ioprio_set, kexec_load, keyctl, renameat2, and request_key syscalls. * Robustified decoding of select, pselect, and io_submit syscalls. * Enhanced decoding of delete_module, fanotify_init, fanotify_mark, fcntl, setdomainname, sethostname, setns, and sync_file_range syscalls. * Enhanced decoding of signal bitmasks. * Enhanced decoding of file descriptors. * Enhanced siginfo_t decoding. * Enhanced PF_NETLINK decoding. * Updated CLOCK_* constants (addresses Fedora bug #1088455). * Added new syscall entries to match Linux 3.16. * Bug fixes * Added shmat and shmdt to the set of memory mapping related syscalls. * Fixed detaching from stopped processes. * Fixed fanotify_mark decoding on 32bit architectures. * Fixed offset decoding in preadv and pwritev syscalls. * Fixed select decoding for glibc in _FORTIFY_SOURCE mode. * Fixed decoding of epoll_ctl syscall with EPOLL_CTL_DEL argument. * Fixed build when <sys/ptrace.h> and <linux/ptrace.h> conflict (addresses Fedora bug #993384). * Miscellaneous corrections in the manual page. (Addresses Debian bug #725987). - Remove obsolete patches: * strace-4.7.diff * strace-linux-ptrace-h.patch * strace-ppc64le.patch * strace_cid_03ef0b2.patch ==== suspend ==== - remove mkinitrd scripts, mkinitrd is no longer used and it seems to work with dracut already (bsc#893574) ==== systemd-rpm-macros ==== - Mark /etc/rpm/macros.systemd as configuration file - Apply then delete patch systemd-daemon-reload-before-service-restart.patch - Add orignal systemd macros as well (boo#807164) ==== tar ==== - compile in ACLs, Xattr and selinux support [boo#906413] ==== libwrap0 ==== Subpackages: libwrap0-32bit tcpd-devel - Cleanup with spec-cleaner - Remove obsolete sections of provides from 2k6 - Remove static library ==== thai-fonts ==== Version update (0.6.0 -> 0.6.1) - updated to 0.6.1: * New font: Laksaman (Sarabun derivative). * Split fontconfig files to allow individual fonts installation. * LaTeX options for setting default fonts. ==== usbutils ==== Version update (007 -> 008) - Update to usbutils 008 * most important change is that lsusb switched to use the udev hardware database instead of the usb.ids file * lsusb: Reports if USB2.0 port is on L1 state * lsusb: Reports devices that support BESL on USB2.0 * dump_ccid_device: fix a typo * lsusb: fix incorrect printf() for CAPS * lsusb-t: handle problem if there is no usb bus list * Ignore invalid string descriptors * usb-devices: hexadecimal bInterfaceNumber handling ==== vm-install ==== Version update (0.8.32 -> 0.8.34) - bnc#906248 - opensuse 13.2 i586 bit not installable as xen pv-guest - Add i686 arch for kernel/initrd lookup - Remove unused ia64 code - Version 0.8.34 - bnc#886623 - vm-install: GtkWarning: IA__gtk_widget_event: assertion 'WIDGET_REALIZED_FOR_EVENT (widget, event)' failed gtk.main() - Version 0.8.33 ==== wine ==== Version update (1.7.31 -> 1.7.32) Subpackages: wine-32bit - Updated to 1.7.32 development snapshot - New version of the Mono engine. - A few more functions implemented in MSHTML. - Improved support for restoring display mode. - Font metrics improvements in DirectWrite. - Various bug fixes. - updated winetricks to current version ==== yast2 ==== Version update (3.1.110 -> 3.1.111) Subpackages: yast2-devel-doc - remove support for the unmaintained GTK UI plugin (bnc#901511) - 3.1.111 ==== yast2-auth-server ==== Version update (3.1.11 -> 3.1.12) - bnc#897441 - Yast2 Certificate module are broken - 3.1.12 ==== yast2-country ==== Version update (3.1.13 -> 3.1.14) Subpackages: yast2-country-data - More intuitive order when navigating with the tab key in the timezone selection screen (bnc#872341). - 3.1.14 ==== yast2-ftp-server ==== Version update (3.1.6 -> 3.1.7) - AutoYaST import: Initialize the correct ftpserver which will be used for configuration. (bnc#907354) - 3.1.7 ==== yp-tools ==== Version update (2.14 -> 3.0.1) - Filter libc.so.6(GLIBC_PRIVATE) from the requires of libnss_nis6: we consciously use glibc internas. - Do not install libtool archives. - fix bashism in match_printcap script - Update to version 3.0.1 - Use very short timeout for clnt_create() - Update to version 3.0 - fix xdrfile-test.c on 32bit - Update to version 2.99.8 - Enhance libnis for ypserv - Update to version 2.99.7 - Rework nss_nis6 dependencys (RPM handles glibc provides very special) - Some fixes to yp_prot.h for ypserv - Update to version 2.99.6 - Finish libnis library - Add nss_nis6 plugin for glibc - Update to version 2.99.5 - Implement v3 protocol for ypset - Enhance libnis library - Update to version 2.99.4 - fixes last IPv4 only code (except ypset) - Update to version 2.99.3 - fixes some bugs to build ypbind - Update to version 2.99.2 - ypwhich speaks now ypbind v3 protocol - Add seperate libnis library - Update to version 2.99.1 - port to TI-RPC - ypwhich and ypset can now use IPv6 to speak with ypbind ==== ypbind ==== Version update (1.38 -> 2.0) - Update to ypbind-2.0 - final release with IPv6 support - Update to ypbind-1-99.5 - disable workaround which could lead to a crash - Update to ypbind-1.99.4 - ypbind protocol v3 fully implemented - Update to ypbind-1.99.3 - build against libnis/ti-rpc - register with ypbind protocol version 3, too - Update to ypbind-1.99.2 - add check for localhost/IPv6 ==== ypserv ==== Version update (2.32.1 -> 3.0) - Update to version 3.0 - evyerthing is now ported - Update to version 2.99.3 - Implement -p option for ypserv - Update to version 2.99.2 - At least everything compiles now - Update to version 2.99.1 - Start porting to use ti-rpc interfaces for IPv6 support ==== libzmq4 ==== - Split the curve-keygen binary to separate subpkg bnc#907584 * Add conflicts to new supackage Removed packages: bundle-lang-common-ar libkface2 > libkgeomap1 Added packages: libchromaprint0 libkface3 > libkgeomap2 libnis1 zeromq-tools -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] Default theme for KDE:Framework5/Plasma5/Workspace5
by Freek de Kruijf 03 Dec '14

03 Dec '14

I am starting a discussion here about the default theme for KDE:Framework5 / Plasma5 / Workspace5. The current default theme is apparently derived from the upstream theme Breese. However this theme shows the list of folders in KMail, and possibly other lists as well, with quite some spacing between the lines. The consequence is that this list does not fit on my screen, whereas it does fit on my screen when using the Oxygen theme. There is already a bug report about this on bugs.kde.org, but the reaction is WONTFIX. Having that in mind, the openSUSE community needs to discuss the default for the KDE Workspace theme, being it derived from this Breese theme or from an alternative which gives us more lines on our screen. I also started a bug report in openSUSE's bugzilla. http://bugzilla.opensuse.org/show_bug.cgi?id=908091 -- fr.gr. Freek de Kruijf -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 2

[opensuse-factory] Internal compiler error when running make oldconfig && make prepare
by Roman Bysh 03 Dec '14

03 Dec '14

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hello everybody, I just ran: cd /usr/src/linux then make oldconfig && make prepare HOSTCC scripts/basic/fixdep gcc: internal compiler error: Bus error (program as) Please submit a full bug report, with preprocessed source if appropriate. See <http://bugs.opensuse.org/> for instructions. scripts/Makefile.host:118: recipe for target 'scripts/basic/fixdep' failed make[1]: *** [scripts/basic/fixdep] Error 4 Makefile:475: recipe for target 'scripts_basic' failed make: *** [scripts_basic] Error 2 When submitting bug would this be submitted under gcc48? Is any one else getting this error in openSUSE 13.2? - -- Cheers! Roman - ----------------------------------------- | openSUSE | | Open Minds Open Sources Open Future | - ----------------------------------------- http://linuxcounter.net/ #179293 -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 Comment: Using GnuPG with Thunderbird - http://www.enigmail.net/ iQIcBAEBAgAGBQJUen7LAAoJEAwC6tvrxPmQs/8P/3qvAwv7PmqHFT7d8Pa4S6MH afXZEFwnX+Xzs7ufnsQ/r2LWAhdqUbkKhFG1YgtAxGJeqtOPPst+mso6GWwU1HpX x725hQ6YN/Y+VYKATMcvNYH9f3QQjTBVf2hh/moCyos0gtbMNB0OI/dG4sCrU8s5 VHeGk5jEswViBj523gBWZHK1Z6unuG2Jjbe/oywbv56BiLMQt1GeB0jhnVxjtaoD Msi8BTCNm10E5TSv+wG91lcexopaLYcEh6/BD49F+ajIP/KAoLr9QOdhj11vU9/v ODl2kEmOIoFNnl71Uvw4c5yZ3ZsHffBuhXAE1xfk/52yaituQ+HKpIPs/7VOwANZ 19oQhdvN8jdiR/k/nMh2XNCWoJLQW4McwNkWNvd87jlnswgtaYi8fiCa66smtwZO kFyaZKQAyTda4mFdt4g6W9uZm4zuYqVnTgWIho7eKzfEkuf2Jb4cp/yWLIHNv6X6 Bpie6hHHbHo7FH/ElZR7U4wis+KkTZZRNajpsCfLC6oFLnaZyuWcuhraxcH9LEuW KDapZvAbcxY6g4DQYIzU+C75NjwTi6DDJvHQJQQ5T7fK+n1YivYQ3RxlfXWbva8i LxZgJtYup+jPwifcZm4xMNvfRxmkMES3mDRADrN1M92zDPYXIinOzNxAoauOu5a6 pPfBQxUVNoRh+ocARoj1 =vaCi -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

11 34

[opensuse-factory] the yast-team is looking for someone to maintain the yast apparmor module
by Per Jessen 03 Dec '14

03 Dec '14

https://features.opensuse.org/318216 I find it a very odd idea to use FATE to announce dropping a yast module unless someones picks it up, but the YaST team lead disagrees. > Description: > The current Yast AppArmor configuration tool has been written by > Immunix guys, but nobody understands the technology and even worse, > nobody understands and nobody is able to maintain the current code as > it has been developed in a very strange way in Perl. > We want to drop this module or we will gladly hand it over to anyone. > > Business case (Partner benefit): > openSUSE.org: Old unmaintained code, technology is not known in the > Yast team, nobody is able to take care about it. -- Per Jessen, Zürich (4.6°C) http://www.dns24.ch/ - free dynamic DNS, made in Switzerland. -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] [RFC] improve tty/serial console login prompt with network infromation
by Matwey V. Kornilov 02 Dec '14

02 Dec '14

Hi, I run a few virtual machines for development and experiments, of course I create and kill them all the time. Also I sometimes plays with ARM JeOSes, constantly trying to fix the things on my BeagleBone Black. Usually it looks like dd_rescue new image onto sd, boot the system, and dispose sd card. Common issue here, that initially I see the boot process of the newly deployed operating system through the console, serial console in case of ARM board, or 'virtual' text tty console in case of virtual machine manager. It usually ends up with the things kind of the following: Starting Network Manager Script Dispatcher Service... [ OK ] Started Network Manager Script Dispatcher Service. [ OK ] Started X Display Manager. [ OK ] Created slice user-490.slice. Starting User Manager for UID 490... Welcome to openSUSE Factory "Harlequin" - Kernel 3.18.0-rc6-5-default (ttyO0). linux login: And in most cases, the first step here is to login to find the current IP address. I would like to see something like the following instead: [ OK ] Started X Display Manager. [ OK ] Created slice user-490.slice. Starting User Manager for UID 490... Welcome to openSUSE Factory "Harlequin" - Kernel 3.18.0-rc6-5-default (ttyO0). lo: link/loopback inet 127.0.0.1/8 eth0: link/ether c8:a0:30:af:5d:96 inet 192.168.185.23/24 linux login: I.e. I would like to see IP addresses before login prompt, like CoreOS does. As cloud computing services and virtualization grow nowadays I think this can be suitable and useful for almost all users. -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

3 2

[opensuse-factory] When will PostgreSQL 9.4 will be added to factory..??
by André Verwijs 01 Dec '14

01 Dec '14

When will PostgreSQL 9.4 will be added to factory..?? ok true, not yet supported with Pgadmin3, but this needs a serious update to .... -- ______________________________________________________________________________________ My Twitter Page: http://twitter.com/OpenSimFan My Facebook page (be my friend, please ) http://www.facebook.com/andre.verwijs My Google+ page (follow me please ) André Verwijs - Google+ <https://plus.google.com/111310545842863442992/posts> -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 1

[opensuse-factory] Tumbleweed = crawl-weed?
by Frans de Boer 01 Dec '14

01 Dec '14

Pardon the subject, but one can read that I am not very impressed by Tumbleweed having packages from beginning of this year until sometime July/August and promote them as being new. Example: GCC-4.9.0 RC2?? We have 4.9.2 and nasm 2.10.x while 2.11.06 is already out for some time?? I switched to Tumbleweed because it should hold newer packages then the already many outdated ones in 13.2. Well, some are newer, many are not really new. I switched also because I am using LFS (Linux From Scratch) and found no problems with packages newer then most in any of the current opensuse distributions. Can we expect really newer packages - not lagging more then say a month - or just forget about Tumbleweed as being cutting-edge? Regards, Frans. -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

4 3