December 2012 - openSUSE Factory - openSUSE Mailing Lists

[opensuse-factory] glibc update w/ arch change i586->i686? (Tumbleweed)
by Achim Gratz 17 Dec '12

17 Dec '12

I'm running Tumbleweed, but this update really comes from 12.2. Yesterday zypper offered to update glibc with an architecture change from i586->i686. After that update, no locale definitions were present except for the builtin C/POSIX. I've manually reverted to i586 and that cleared up the problem (like the missing /usr/lib/locale directory). Of course if I attempt another dup, I'll get the same offer again: --8<---------------cut here---------------start------------->8--- The following packages are going to change architecture: glibc i586 -> i686 glibc-debuginfo i586 -> i686 glibc-devel i586 -> i686 glibc-extra i586 -> i686 glibc-locale i586 -> i686 glibc-locale-debuginfo i586 -> i686 6 packages will change arch. Overall download size: 9.9 MiB. After the operation, 91.8 MiB will be freed. --8<---------------cut here---------------end--------------->8--- Note the part about the 91.8 MiB that will be freed after the update -- most likely the locale data, but I can't find another (noarch?) package that looks like it would have it. The architecture change itself doesn't seem to be a problem or the system wouldn't be booting, so is there something else missing or must be re-installed? Zypper verify comes back empty. Regards, Achim. -- +<[Q+ Matrix-12 WAVE#46+305 Neuron microQkb Andromeda XTk Blofeld]>+ SD adaptations for Waldorf Q V3.00R3 and Q+ V3.54R2: http://Synth.Stromeko.net/Downloads.html#WaldorfSDada -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

5 9

[opensuse-factory] Will the built 3.7.x kernel builds be put into factory and replace the version 3.6.3x builds.
by doiggl＠velocitynet.com.au 16 Dec '12

16 Dec '12

Hello Will the built 3.7.x kernel builds[1] be put into factory[2] and replace the version 3.6.3x builds. Just wondering if it will be included in milestone 3 or 4 for 12.3. Havent seen it used in any openqa tests[eg boot] http://openqa.opensuse.org/results/?sort=-mtime&hours=24&match= Cheers Glenn [1]https://build.opensuse.org/package/show?package=kernel-source&project=Ker… [2]https://build.opensuse.org/package/show?package=kernel-source&project=ope… -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] On openSUSE 12.3 M2 -- openSUSE greeter opens introduction to kde4 shows openSUSE 11.3 uses KDE 4.4 as its KDE desktop
by Roman Bysh 15 Dec '12

15 Dec '12

Hello List mates, Can the openSUSE greeter be fixed and updated to KDE 4.10 instead of openSUSE 11.3 KDE 4.4? It's about time. Yes? Here's the link https://bugzilla.novell.com/show_bug.cgi?id=774509 Cheers! Roman --------------------------------------------------------------- openSUSE -- Get it! Discover it! Share it! --------------------------------------------------------------- http://linuxcounter.net/ #179293 -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] Bash : T'weed : setlocale: LC_NUMERIC
by ellanios82 14 Dec '12

14 Dec '12

Hello List - after recent large upgrade, konsole bash prints message : ................... -bash: warning: setlocale: LC_NUMERIC: cannot change locale (en_US.UTF-8): No such file or directory ....................... best regards Ellan -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

3 3

[opensuse-factory] Status: Distribution
by Stephan Kulow 14 Dec '12

14 Dec '12

Hi, We had a big problem here this week, so we're a bit late with the Milestone2 (I learned my part and will include the SUSE christmas party in the schedule next year :). But build 260 looks good even though openqa struggles with it. Unfortunately M2 will come with kernel 3.6, possibly we roll out 3.7.0 as maintenance update, but the raw diff to M1 is pretty impressive: http://paste.opensuse.org/76701742 Greetings, Stephan -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 1

[opensuse-factory] Introducing Haskell Platform to Factory
by Peter Trommler 14 Dec '12

14 Dec '12

To complete a feature request to add haskell packages to Factory I will submit haskell-platform and its depending packages to Factory. [see https://features.opensuse.org/314446] Haskell Platform is a selected set of stable Haskell tools an library that helps getting started programming in Haskell quickly. See [www.haskell.org/platform] for details. Haskell Platform makes two releases a year. I am looking forward to having Haskell Platform in Factory! Peter The following packages are part of Haskell Platform: alex cabal-install ghc-async ghc-cgi ghc-fgl ghc-GLUT ghc-haskell-src ghc-html ghc-HTTP ghc-HUnit ghc-mtl ghc-network ghc-OpenGL ghc-parallel ghc-parsec ghc-primitve ghc-QuickCheck ghc-random ghc-regex-base ghc-regex-compat ghc-regex-posix ghc-rpm-macros ghc-split ghc-stm ghc-syb ghc-text ghc-transformers ghc-vector ghc-xhtml ghc-zlib happy haskell-platform hscolour -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] nfsserver not being enabled
by Sid Boyce 14 Dec '12

14 Dec '12

Apologies for the late reply, my smoothwall firewall box died as I was trying to send this and I've had to hunt around and build another PC and reinstall smoothwall. I have had to start nfsserver.service and rpcbind.service manually. # systemctl enable nfsserver.service nfsserver.service is not a native service, redirecting to /sbin/chkconfig. Executing /sbin/chkconfig nfsserver on insserv: FATAL: service portmap has to be enabled to use service nfsserver insserv: Service boot.localfs has to exists for service boot.crypto insserv: Service syslog has to exists for service ntp insserv: Service network is missed in the runlevels 2 to use service webmin insserv: Service boot.rootfsck has to exists for service boot.localnet insserv: Service boot.cleanup has to exists for service apparmor insserv: exiting now! /sbin/insserv failed, exit code 1 # ps fax|grep nfs 5122 ? S< 0:00 \_ [nfsd4] 5123 ? S< 0:00 \_ [nfsd4_callbacks] 5124 ? S 0:00 \_ [nfsd] 5125 ? S 0:00 \_ [nfsd] 5134 ? S 0:00 \_ [nfsd] 5135 ? S 0:00 \_ [nfsd] 6088 pts/1 S+ 0:00 | \_ grep --color=auto nfs # ps fax|grep rpc 5096 ? S< 0:00 \_ [rpciod] 859 ? Ss 0:00 /sbin/rpcbind -w -f 6115 pts/1 S+ 0:00 | \_ grep --color=auto rpc 5112 ? Ss 0:00 /usr/sbin/rpc.idmapd 5116 ? Ss 0:00 /usr/sbin/rpc.mountd 5119 ? Ss 0:00 /usr/sbin/rpc.statd --no-notify I shall submit a bug later. Regards Sid. -- Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support Senior Staff Specialist, Cricket Coach Microsoft Windows Free Zone - Linux used for all Computing Tasks -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 1

[opensuse-factory] Get zypper into Tumbleweed?
by Achim Gratz 13 Dec '12

13 Dec '12

As the subject says: would it be possible to get zypper from Factory into Tumbleweed? Regards, Achim. -- +<[Q+ Matrix-12 WAVE#46+305 Neuron microQkb Andromeda XTk Blofeld]>+ SD adaptations for Waldorf Q V3.00R3 and Q+ V3.54R2: http://Synth.Stromeko.net/Downloads.html#WaldorfSDada -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 4

[opensuse-factory] tumbleweed - whining & complaining!!
by ellanios82 12 Dec '12

12 Dec '12

Hello List tumbleweed __________ "The Tumbleweed project provides a *rolling updates* version of openSUSE containing the latest stable versions of all software instead of relying on rigid periodic release cycles. The project does this for users that want the newest, but stable software" { http://en.opensuse.org/Tumbleweed } ............ - having got ones knickers in a dreadful twist today [unable log-on as user, unable use konsole etc.] . . . just wondering whether the lightening speed upgrades & downgrades, are not leaving junior SuSErs of limited ability [ like yours-truly ] slightly mystified by the elusive wish for "the newest, but stable software" ?? ............ thanks best regards Ellan -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

4 5

[opensuse-factory] zypper dup on Tumbleweed
by ellanios82 12 Dec '12

12 Dec '12

Hello List - maybe an accident of timing . . . today zypper dup on Tumbleweed has provided me a fair helping of cold-sweat - unable to log-on as user . . . unable to get cursor on Konsole . . . unable to use 'tar' to try re-install backup fortunately, all well now . . . maybe an accident of timing :) .......... best regards Ellan -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 2