May 2008 - openSUSE Factory - openSUSE Mailing Lists

[opensuse-factory] Re: Problem printing with CUPs to network printers on openSUSE 11.0 beta2
by Peter Nixon 20 May '08

20 May '08

On Sat 17 May 2008, Carlos E. R. wrote: > The Saturday 2008-05-17 at 13:10 +0300, Peter Nixon wrote: > > Is anyone else having issues printing to network printers (I have not > > tried local ones) with cups on 11.0 beta (Same problem on beta 1 and 2) > > > > I have tried defining the remote printer as a raw socket, lpd port and > > ipp and I get a very similar error in each case. Same configuration > > works fine on 10.3 and I can happily access the print servers IPP queue > > status page etc with http so its not a networking issue: > > If it works with 10.3 and not 11.0 beta, you should be asking this in the > factory list, not here. Most of the experts are there. OK. CCing to the factory list. > > W [17/May/2008:11:18:30 +0300] [Job 1] This document does not conform to > > the Adobe Document Structuring Conventions and may not print correctly! > > Were you printing a PDF? If so, it is bad. No. Its worse. That was the log of trying to print a test page from yast! > > E [17/May/2008:11:18:31 +0300] PID 9420 (/usr/lib64/cups/backend/lpd) > > stopped with status 1! > > I [17/May/2008:11:18:31 +0300] Hint: Try setting the LogLevel to "debug" > > to find out more. > > Do so. Here is the log if trying to print a single line text document from kate: ==> /var/log/cups/access_log <== localhost - - [19/May/2008:10:50:28 +0300] "POST /printers/ HTTP/1.1" 200 112 CUPS-Get-Printers successful-ok localhost - - [19/May/2008:10:50:28 +0300] "POST /printers/ HTTP/1.1" 200 254 CUPS-Get-Printers successful-ok localhost - - [19/May/2008:10:50:28 +0300] "POST /classes/ HTTP/1.1" 200 224 CUPS-Get-Classes successful-ok localhost - - [19/May/2008:10:50:28 +0300] "POST /printers/ HTTP/1.1" 200 112 CUPS-Get-Default successful-ok localhost - - [19/May/2008:10:50:28 +0300] "POST /printers/ HTTP/1.1" 200 371 Get-Printer-Attributes successful-ok ==> /var/log/cups/error_log <== D [19/May/2008:10:50:28 +0300] cupsdAcceptClient: 7 from localhost (Domain) D [19/May/2008:10:50:28 +0300] cupsdCloseClient: 7 D [19/May/2008:10:50:28 +0300] cupsdAcceptClient: 7 from localhost (Domain) D [19/May/2008:10:50:28 +0300] cupsdReadClient: 7 POST /printers/ HTTP/1.1 D [19/May/2008:10:50:28 +0300] cupsdAuthorize: No authentication data provided. D [19/May/2008:10:50:28 +0300] CUPS-Get-Printers D [19/May/2008:10:50:28 +0300] cupsdProcessIPPRequest: 7 status_code=0 (successful-ok) D [19/May/2008:10:50:28 +0300] cupsdCloseClient: 7 D [19/May/2008:10:50:28 +0300] cupsdAcceptClient: 7 from localhost (Domain) D [19/May/2008:10:50:28 +0300] cupsdReadClient: 7 POST /printers/ HTTP/1.1 D [19/May/2008:10:50:28 +0300] cupsdAuthorize: No authentication data provided. D [19/May/2008:10:50:28 +0300] CUPS-Get-Printers D [19/May/2008:10:50:28 +0300] cupsdProcessIPPRequest: 7 status_code=0 (successful-ok) D [19/May/2008:10:50:28 +0300] cupsdCloseClient: 7 D [19/May/2008:10:50:28 +0300] cupsdAcceptClient: 7 from localhost (Domain) D [19/May/2008:10:50:28 +0300] cupsdReadClient: 7 POST /classes/ HTTP/1.1 D [19/May/2008:10:50:28 +0300] cupsdAuthorize: No authentication data provided. D [19/May/2008:10:50:28 +0300] CUPS-Get-Classes D [19/May/2008:10:50:28 +0300] cupsdProcessIPPRequest: 7 status_code=0 (successful-ok) D [19/May/2008:10:50:28 +0300] cupsdCloseClient: 7 D [19/May/2008:10:50:28 +0300] cupsdAcceptClient: 7 from localhost (Domain) D [19/May/2008:10:50:28 +0300] cupsdReadClient: 7 POST /printers/ HTTP/1.1 D [19/May/2008:10:50:28 +0300] cupsdAuthorize: No authentication data provided. D [19/May/2008:10:50:28 +0300] CUPS-Get-Default D [19/May/2008:10:50:28 +0300] cupsdProcessIPPRequest: 7 status_code=0 (successful-ok) D [19/May/2008:10:50:28 +0300] cupsdCloseClient: 7 D [19/May/2008:10:50:28 +0300] cupsdAcceptClient: 7 from localhost (Domain) D [19/May/2008:10:50:28 +0300] cupsdReadClient: 7 POST /printers/ HTTP/1.1 D [19/May/2008:10:50:28 +0300] cupsdAuthorize: No authentication data provided. D [19/May/2008:10:50:28 +0300] Get-Printer-Attributes ipp://localhost:631/printers/lp2 D [19/May/2008:10:50:28 +0300] cupsdProcessIPPRequest: 7 status_code=0 (successful-ok) D [19/May/2008:10:50:28 +0300] cupsdCloseClient: 7 ==> /var/log/cups/access_log <== localhost - - [19/May/2008:10:50:31 +0300] "POST / HTTP/1.1" 200 198 Get-Printer-Attributes successful-ok localhost - - [19/May/2008:10:50:31 +0300] "GET /ppd/lp2.ppd HTTP/1.1" 200 10693 - - ==> /var/log/cups/error_log <== D [19/May/2008:10:50:31 +0300] cupsdAcceptClient: 7 from localhost (Domain) D [19/May/2008:10:50:31 +0300] cupsdReadClient: 7 POST / HTTP/1.1 D [19/May/2008:10:50:31 +0300] cupsdAuthorize: No authentication data provided. D [19/May/2008:10:50:31 +0300] Get-Printer-Attributes ipp://localhost/printers/lp2 D [19/May/2008:10:50:31 +0300] cupsdProcessIPPRequest: 7 status_code=0 (successful-ok) D [19/May/2008:10:50:31 +0300] cupsdReadClient: 7 GET /printers/lp2.ppd HTTP/1.1 D [19/May/2008:10:50:31 +0300] cupsdAuthorize: No authentication data provided. ==> /var/log/cups/access_log <== localhost - - [19/May/2008:10:50:31 +0300] "POST /printers/lp2 HTTP/1.1" 200 207345 Print-Job successful-ok ==> /var/log/cups/error_log <== D [19/May/2008:10:50:31 +0300] cupsdAcceptClient: 9 from localhost (Domain) D [19/May/2008:10:50:31 +0300] cupsdReadClient: 9 POST /printers/lp2 HTTP/1.1 D [19/May/2008:10:50:31 +0300] cupsdAuthorize: No authentication data provided. D [19/May/2008:10:50:31 +0300] Print-Job ipp://localhost/printers/lp2 D [19/May/2008:10:50:31 +0300] print_job: auto-typing file... D [19/May/2008:10:50:31 +0300] add_job: requesting-user-name="peter" D [19/May/2008:10:50:31 +0300] Adding default job-sheets values "none,none"... I [19/May/2008:10:50:31 +0300] [Job 11] Adding start banner page "none". D [19/May/2008:10:50:31 +0300] Discarding unused job-created event... I [19/May/2008:10:50:31 +0300] [Job 11] Adding job file of type application/postscript. I [19/May/2008:10:50:31 +0300] [Job 11] Adding end banner page "none". I [19/May/2008:10:50:31 +0300] [Job 11] Queued on "lp2" by "peter". D [19/May/2008:10:50:31 +0300] [Job 11] hold_until = 0 D [19/May/2008:10:50:31 +0300] Discarding unused printer-state-changed event... D [19/May/2008:10:50:31 +0300] [Job 11] job-sheets=none,none D [19/May/2008:10:50:31 +0300] [Job 11] banner_page = 0 D [19/May/2008:10:50:31 +0300] [Job 11] argv[0]="lp2" D [19/May/2008:10:50:31 +0300] [Job 11] argv[1]="11" D [19/May/2008:10:50:31 +0300] [Job 11] argv[2]="peter" D [19/May/2008:10:50:31 +0300] [Job 11] argv[3]="Untitled" D [19/May/2008:10:50:31 +0300] [Job 11] argv[4]="1" D [19/May/2008:10:50:31 +0300] [Job 11] argv[5]="multiple-document-handling=separate-documents-collated-copies orientation-requested=3 job-uuid=urn:uuid:48c8de80-251a-3d62-4381-a07556b8b7d1" D [19/May/2008:10:50:31 +0300] [Job 11] argv[6]="/var/spool/cups/d00011-001" D [19/May/2008:10:50:31 +0300] [Job 11] envp[0]="CUPS_CACHEDIR=/etc/cups/yes" D [19/May/2008:10:50:31 +0300] [Job 11] envp[1]="CUPS_DATADIR=/usr/share/cups" D [19/May/2008:10:50:31 +0300] [Job 11] envp[2]="CUPS_DOCROOT=/usr/share/doc/packages/cups" D [19/May/2008:10:50:31 +0300] [Job 11] envp[3]="CUPS_FONTPATH=/usr/share/cups/fonts" D [19/May/2008:10:50:31 +0300] [Job 11] envp[4]="CUPS_REQUESTROOT=/var/spool/cups" D [19/May/2008:10:50:31 +0300] [Job 11] envp[5]="CUPS_SERVERBIN=/usr/lib64/cups" D [19/May/2008:10:50:31 +0300] [Job 11] envp[6]="CUPS_SERVERROOT=/etc/cups" D [19/May/2008:10:50:31 +0300] [Job 11] envp[7]="CUPS_STATEDIR=/var/run/cups" D [19/May/2008:10:50:31 +0300] [Job 11] envp[8]="PATH=/usr/lib64/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin" D [19/May/2008:10:50:31 +0300] [Job 11] envp[9]="SERVER_ADMIN=root(a)linux.site" D [19/May/2008:10:50:31 +0300] [Job 11] envp[10]="SOFTWARE=CUPS/1.3.7" D [19/May/2008:10:50:31 +0300] [Job 11] envp[11]="TMPDIR=/var/spool/cups/tmp" D [19/May/2008:10:50:31 +0300] [Job 11] envp[12]="USER=root" D [19/May/2008:10:50:31 +0300] [Job 11] envp[13]="CUPS_SERVER=/var/run/cups/cups.sock" D [19/May/2008:10:50:31 +0300] [Job 11] envp[14]="CUPS_ENCRYPTION=IfRequested" D [19/May/2008:10:50:31 +0300] [Job 11] envp[15]="IPP_PORT=631" D [19/May/2008:10:50:31 +0300] [Job 11] envp[16]="CHARSET=utf-8" D [19/May/2008:10:50:31 +0300] [Job 11] envp[17]="LANG=en_US.UTF8" D [19/May/2008:10:50:31 +0300] [Job 11] envp[18]="PPD=/etc/cups/ppd/lp2.ppd" D [19/May/2008:10:50:31 +0300] [Job 11] envp[19]="RIP_MAX_CACHE=8m" D [19/May/2008:10:50:31 +0300] [Job 11] envp[20]="CONTENT_TYPE=application/postscript" D [19/May/2008:10:50:31 +0300] [Job 11] envp[21]="DEVICE_URI=lpd://10.11.11.200:631/lp2" D [19/May/2008:10:50:31 +0300] [Job 11] envp[22]="PRINTER=lp2" D [19/May/2008:10:50:31 +0300] [Job 11] envp[23]="FINAL_CONTENT_TYPE=printer/lp2" I [19/May/2008:10:50:31 +0300] [Job 11] Started filter /usr/lib64/cups/filter/pstops (PID 4373) I [19/May/2008:10:50:31 +0300] [Job 11] Started filter /usr/lib64/cups/filter/foomatic-rip (PID 4374) I [19/May/2008:10:50:31 +0300] [Job 11] Started backend /usr/lib64/cups/backend/lpd (PID 4375) D [19/May/2008:10:50:31 +0300] Discarding unused job-state-changed event... D [19/May/2008:10:50:31 +0300] cupsdProcessIPPRequest: 9 status_code=0 (successful-ok) D [19/May/2008:10:50:31 +0300] cupsdCloseClient: 9 D [19/May/2008:10:50:31 +0300] [Job 11] Page = 595x842; 18,36 to 577,806 D [19/May/2008:10:50:31 +0300] [Job 11] slow_collate=0, slow_duplex=0, slow_order=0 D [19/May/2008:10:50:31 +0300] [Job 11] Before copy_comments - %!PS-Adobe-1.0 D [19/May/2008:10:50:31 +0300] [Job 11] %!PS-Adobe-1.0 D [19/May/2008:10:50:31 +0300] [Job 11] %%BoundingBox: 0 0 595 842 D [19/May/2008:10:50:31 +0300] [Job 11] %%Creator: Qt 3.3.8b D [19/May/2008:10:50:31 +0300] [Job 11] %%Title: Untitled D [19/May/2008:10:50:31 +0300] [Job 11] %%CreationDate: Mon May 19 10:50:31 2008 D [19/May/2008:10:50:31 +0300] [Job 11] %%Orientation: Portrait D [19/May/2008:10:50:31 +0300] [Job 11] %%Pages: 1 D [19/May/2008:10:50:31 +0300] [Job 11] %%DocumentFonts: NimbusMonL-Regu D [19/May/2008:10:50:31 +0300] [Job 11] Before copy_prolog - D [19/May/2008:10:50:31 +0300] [Job 11] Before copy_setup - %%BeginSetup D [19/May/2008:10:50:32 +0300] [Job 11] foomatic-rip version $Revision$ running... D [19/May/2008:10:50:32 +0300] [Job 11] Parsing PPD file ... D [19/May/2008:10:50:32 +0300] [Job 11] *cupsFilter: "application/vnd.cups-postscript 0 foomatic-rip" D [19/May/2008:10:50:32 +0300] [Job 11] Added option ColorSpace D [19/May/2008:10:50:32 +0300] [Job 11] Added option PageSize D [19/May/2008:10:50:32 +0300] [Job 11] Added option PageRegion D [19/May/2008:10:50:32 +0300] [Job 11] Added option ImageableArea D [19/May/2008:10:50:32 +0300] [Job 11] Added option PaperDimension D [19/May/2008:10:50:32 +0300] [Job 11] Added option InputSlot D [19/May/2008:10:50:32 +0300] [Job 11] Added option Resolution D [19/May/2008:10:50:32 +0300] [Job 11] Added option HalftoningAlgorithm D [19/May/2008:10:50:32 +0300] [Job 11] Added option Font D [19/May/2008:10:50:32 +0300] [Job 11] D [19/May/2008:10:50:32 +0300] [Job 11] Parameter Summary D [19/May/2008:10:50:32 +0300] [Job 11] ----------------- D [19/May/2008:10:50:32 +0300] [Job 11] D [19/May/2008:10:50:32 +0300] [Job 11] Spooler: cups D [19/May/2008:10:50:32 +0300] [Job 11] Printer: lp2 D [19/May/2008:10:50:32 +0300] [Job 11] Shell: /bin/sh D [19/May/2008:10:50:32 +0300] [Job 11] PPD file: /etc/cups/ppd/lp2.ppd D [19/May/2008:10:50:32 +0300] [Job 11] ATTR file: D [19/May/2008:10:50:32 +0300] [Job 11] Printer model: HP LaserJet Foomatic/laserjet (recommended) D [19/May/2008:10:50:32 +0300] [Job 11] Job title: Untitled D [19/May/2008:10:50:32 +0300] [Job 11] File(s) to be printed: D [19/May/2008:10:50:32 +0300] [Job 11] <STDIN> D [19/May/2008:10:50:32 +0300] [Job 11] D [19/May/2008:10:50:32 +0300] [Job 11] GhostScript extra search path ('GS_LIB'): /usr/share/cups/fonts D [19/May/2008:10:50:32 +0300] [Job 11] Pondering option 'multiple-document-handling=separate-documents-collated-copies' D [19/May/2008:10:50:32 +0300] [Job 11] Unknown option multiple-document-handling=separate-documents-collated-copies. D [19/May/2008:10:50:32 +0300] [Job 11] Pondering option 'orientation-requested=3' D [19/May/2008:10:50:32 +0300] [Job 11] Unknown option orientation-requested=3. D [19/May/2008:10:50:32 +0300] [Job 11] Pondering option 'job-uuid=urn:uuid:48c8de80-251a-3d62-4381-a07556b8b7d1' D [19/May/2008:10:50:32 +0300] [Job 11] Unknown option job-uuid=urn:uuid:48c8de80-251a-3d62-4381-a07556b8b7d1. D [19/May/2008:10:50:32 +0300] [Job 11] D [19/May/2008:10:50:32 +0300] [Job 11] ================================================ D [19/May/2008:10:50:32 +0300] [Job 11] D [19/May/2008:10:50:32 +0300] [Job 11] File: <STDIN> D [19/May/2008:10:50:32 +0300] [Job 11] D [19/May/2008:10:50:32 +0300] [Job 11] ================================================ D [19/May/2008:10:50:32 +0300] [Job 11] D [19/May/2008:10:50:32 +0300] [Job 11] Reading PostScript input ... D [19/May/2008:10:50:32 +0300] [Job 11] --> This document is DSC-conforming! D [19/May/2008:10:50:32 +0300] [Job 11] D [19/May/2008:10:50:32 +0300] [Job 11] ----------- D [19/May/2008:10:50:32 +0300] [Job 11] Found: %%BeginProlog D [19/May/2008:10:50:32 +0300] [Job 11] Found: %%EndProlog D [19/May/2008:10:50:32 +0300] [Job 11] D [19/May/2008:10:50:32 +0300] [Job 11] ----------- D [19/May/2008:10:50:32 +0300] [Job 11] Found: %%BeginSetup D [19/May/2008:10:50:32 +0300] [Job 11] Found: %%BeginFeature: *PageRegion A4 D [19/May/2008:10:50:32 +0300] [Job 11] Option: PageRegion=A4 --> Option will be set by PostScript interpreter D [19/May/2008:10:50:32 +0300] [Job 11] Found: %%BeginFeature: *InputSlot Default D [19/May/2008:10:50:32 +0300] [Job 11] Option: InputSlot=Default --> Setting option D [19/May/2008:10:50:32 +0300] [Job 11] Found: %% FoomaticRIPOptionSetting: InputSlot=Default D [19/May/2008:10:50:32 +0300] [Job 11] Option: InputSlot=Default --> Setting option D [19/May/2008:10:50:32 +0300] [Job 11] Found: %%BeginFeature: *Resolution 300x300dpi D [19/May/2008:10:50:32 +0300] [Job 11] Option: Resolution=300x300dpi --> Option will be set by PostScript interpreter D [19/May/2008:10:50:32 +0300] [Job 11] Before page loop - %%Page: 1 1 D [19/May/2008:10:50:32 +0300] [Job 11] Copying page 1... D [19/May/2008:10:50:32 +0300] [Job 11] pagew = 559.0, pagel = 770.0 D [19/May/2008:10:50:32 +0300] [Job 11] bboxx = 0, bboxy = 0, bboxw = 595, bboxl = 842 D [19/May/2008:10:50:32 +0300] [Job 11] PageLeft = 18.0, PageRight = 577.0 D [19/May/2008:10:50:32 +0300] [Job 11] PageTop = 806.0, PageBottom = 36.0 D [19/May/2008:10:50:32 +0300] [Job 11] PageWidth = 595.0, PageLength = 842.0 D [19/May/2008:10:50:32 +0300] [Job 11] Wrote 1 pages... D [19/May/2008:10:50:32 +0300] PID 4373 (/usr/lib64/cups/filter/pstops) exited with no errors. D [19/May/2008:10:50:32 +0300] [Job 11] Found: %%EndSetup D [19/May/2008:10:50:32 +0300] [Job 11] Inserting PostScript code for CUPS' page accounting D [19/May/2008:10:50:32 +0300] [Job 11] D [19/May/2008:10:50:32 +0300] [Job 11] ----------- D [19/May/2008:10:50:32 +0300] [Job 11] New page: 1 1 D [19/May/2008:10:50:32 +0300] [Job 11] Inserting option code into "PageSetup" section. D [19/May/2008:10:50:32 +0300] [Job 11] D [19/May/2008:10:50:32 +0300] [Job 11] Found: %%BeginPageSetup D [19/May/2008:10:50:32 +0300] [Job 11] Found: %%BeginFeature: *HalftoningAlgorithm Standard D [19/May/2008:10:50:32 +0300] [Job 11] Option: HalftoningAlgorithm=Standard --> Option will be set by PostScript interpreter D [19/May/2008:10:50:32 +0300] [Job 11] Found: %%EndPageSetup D [19/May/2008:10:50:32 +0300] [Job 11] End of page header D [19/May/2008:10:50:32 +0300] [Job 11] Flushing FIFO. D [19/May/2008:10:50:32 +0300] [Job 11] D [19/May/2008:10:50:32 +0300] [Job 11] Starting renderer D [19/May/2008:10:50:32 +0300] [Job 11] JCL: <job data> D [19/May/2008:10:50:32 +0300] [Job 11] D [19/May/2008:10:50:32 +0300] [Job 11] renderer PID kid4=4382 D [19/May/2008:10:50:32 +0300] [Job 11] renderer command: gs -q -dBATCH -dPARANOIDSAFER -dQUIET -dNOPAUSE -sDEVICE=laserjet -sOutputFile=- - | perl -p -0033 -e " s/^&l\d+[aA]/$&/; " D [19/May/2008:10:50:32 +0300] [Job 11] Starting process 4383: "foomatic-gswrapper -q -dBATCH -dPARANOIDSAFER -dQUIET -dNOPAUSE -sDEVICE=laserjet -sOutputFile=- - |..." ==> /var/log/cups/access_log <== localhost - - [19/May/2008:10:50:32 +0300] "POST /printers/ HTTP/1.1" 200 254 CUPS-Get-Printers successful-ok localhost - - [19/May/2008:10:50:32 +0300] "POST /classes/ HTTP/1.1" 200 224 CUPS-Get-Classes successful-ok localhost - - [19/May/2008:10:50:32 +0300] "POST /printers/ HTTP/1.1" 200 112 CUPS-Get-Default successful-ok localhost - - [19/May/2008:10:50:32 +0300] "POST / HTTP/1.1" 200 372 Get-Jobs successful-ok localhost - - [19/May/2008:10:50:32 +0300] "POST /printers/ HTTP/1.1" 200 254 CUPS-Get-Printers successful-ok localhost - - [19/May/2008:10:50:32 +0300] "POST /classes/ HTTP/1.1" 200 224 CUPS-Get-Classes successful-ok localhost - - [19/May/2008:10:50:32 +0300] "POST /printers/ HTTP/1.1" 200 112 CUPS-Get-Default successful-ok localhost - - [19/May/2008:10:50:32 +0300] "POST / HTTP/1.1" 200 372 Get-Jobs successful-ok ==> /var/log/cups/error_log <== D [19/May/2008:10:50:32 +0300] cupsdAcceptClient: 9 from localhost (Domain) D [19/May/2008:10:50:32 +0300] cupsdReadClient: 9 POST /printers/ HTTP/1.1 D [19/May/2008:10:50:32 +0300] cupsdAuthorize: No authentication data provided. D [19/May/2008:10:50:32 +0300] CUPS-Get-Printers D [19/May/2008:10:50:32 +0300] cupsdProcessIPPRequest: 9 status_code=0 (successful-ok) D [19/May/2008:10:50:32 +0300] cupsdCloseClient: 9 D [19/May/2008:10:50:32 +0300] cupsdAcceptClient: 9 from localhost (Domain) D [19/May/2008:10:50:32 +0300] cupsdReadClient: 9 POST /classes/ HTTP/1.1 D [19/May/2008:10:50:32 +0300] cupsdAuthorize: No authentication data provided. D [19/May/2008:10:50:32 +0300] CUPS-Get-Classes D [19/May/2008:10:50:32 +0300] cupsdProcessIPPRequest: 9 status_code=0 (successful-ok) D [19/May/2008:10:50:32 +0300] cupsdCloseClient: 9 D [19/May/2008:10:50:32 +0300] cupsdAcceptClient: 9 from localhost (Domain) D [19/May/2008:10:50:32 +0300] cupsdReadClient: 9 POST /printers/ HTTP/1.1 D [19/May/2008:10:50:32 +0300] cupsdAuthorize: No authentication data provided. D [19/May/2008:10:50:32 +0300] CUPS-Get-Default D [19/May/2008:10:50:32 +0300] cupsdProcessIPPRequest: 9 status_code=0 (successful-ok) D [19/May/2008:10:50:32 +0300] cupsdCloseClient: 9 D [19/May/2008:10:50:32 +0300] cupsdAcceptClient: 9 from localhost (Domain) D [19/May/2008:10:50:32 +0300] cupsdReadClient: 9 POST / HTTP/1.1 D [19/May/2008:10:50:32 +0300] cupsdAuthorize: No authentication data provided. D [19/May/2008:10:50:32 +0300] Get-Jobs ipp://localhost:631/printers/lp2 D [19/May/2008:10:50:32 +0300] cupsdProcessIPPRequest: 9 status_code=0 (successful-ok) D [19/May/2008:10:50:32 +0300] cupsdCloseClient: 9 D [19/May/2008:10:50:32 +0300] cupsdAcceptClient: 9 from localhost (Domain) D [19/May/2008:10:50:32 +0300] cupsdReadClient: 9 POST /printers/ HTTP/1.1 D [19/May/2008:10:50:32 +0300] cupsdAuthorize: No authentication data provided. D [19/May/2008:10:50:32 +0300] CUPS-Get-Printers D [19/May/2008:10:50:32 +0300] cupsdProcessIPPRequest: 9 status_code=0 (successful-ok) D [19/May/2008:10:50:32 +0300] cupsdCloseClient: 9 D [19/May/2008:10:50:32 +0300] cupsdAcceptClient: 9 from localhost (Domain) D [19/May/2008:10:50:32 +0300] cupsdReadClient: 9 POST /classes/ HTTP/1.1 D [19/May/2008:10:50:32 +0300] cupsdAuthorize: No authentication data provided. D [19/May/2008:10:50:32 +0300] CUPS-Get-Classes D [19/May/2008:10:50:32 +0300] cupsdProcessIPPRequest: 9 status_code=0 (successful-ok) D [19/May/2008:10:50:32 +0300] cupsdCloseClient: 9 D [19/May/2008:10:50:32 +0300] cupsdAcceptClient: 9 from localhost (Domain) D [19/May/2008:10:50:32 +0300] cupsdReadClient: 9 POST /printers/ HTTP/1.1 D [19/May/2008:10:50:32 +0300] cupsdAuthorize: No authentication data provided. D [19/May/2008:10:50:32 +0300] CUPS-Get-Default D [19/May/2008:10:50:32 +0300] cupsdProcessIPPRequest: 9 status_code=0 (successful-ok) D [19/May/2008:10:50:32 +0300] cupsdCloseClient: 9 D [19/May/2008:10:50:32 +0300] cupsdAcceptClient: 9 from localhost (Domain) D [19/May/2008:10:50:32 +0300] cupsdReadClient: 9 POST / HTTP/1.1 D [19/May/2008:10:50:32 +0300] cupsdAuthorize: No authentication data provided. D [19/May/2008:10:50:32 +0300] Get-Jobs ipp://localhost:631/printers/lp2 D [19/May/2008:10:50:32 +0300] cupsdProcessIPPRequest: 9 status_code=0 (successful-ok) D [19/May/2008:10:50:32 +0300] cupsdCloseClient: 9 D [19/May/2008:10:50:33 +0300] [Job 11] foomatic-gswrapper: gs '-sstdout=%stderr' '-dBATCH' '-dPARANOIDSAFER' '-dQUIET' '-dNOPAUSE' '-sDEVICE=laserjet' '-sOutputFile=%stdout' '-_' D [19/May/2008:10:50:33 +0300] [Job 11] D [19/May/2008:10:50:33 +0300] [Job 11] Closing renderer D [19/May/2008:10:50:33 +0300] Discarding unused job-progress event... D [19/May/2008:10:50:33 +0300] [Job 11] Process 4383 ending: "foomatic-gswrapper -q -dBATCH -dPARANOIDSAFER -dQUIET -dNOPAUSE -sDEVICE=laserjet -sOutputFile=- - |..." D [19/May/2008:10:50:33 +0300] [Job 11] KID3 exited with status 0 D [19/May/2008:10:50:33 +0300] [Job 11] tail process done writing data to STDOUT D [19/May/2008:10:50:33 +0300] [Job 11] KID4 exited with status 0 D [19/May/2008:10:50:33 +0300] [Job 11] Renderer exit stat: 0 D [19/May/2008:10:50:33 +0300] [Job 11] KID4 finished D [19/May/2008:10:50:33 +0300] [Job 11] KID3 finished D [19/May/2008:10:50:33 +0300] [Job 11] Renderer process finished D [19/May/2008:10:50:33 +0300] [Job 11] D [19/May/2008:10:50:33 +0300] [Job 11] Closing foomatic-rip. D [19/May/2008:10:50:33 +0300] Discarding unused printer-state-changed event... D [19/May/2008:10:50:33 +0300] Discarding unused printer-state-changed event... D [19/May/2008:10:50:33 +0300] PID 4374 (/usr/lib64/cups/filter/foomatic-rip) exited with no errors. D [19/May/2008:10:50:33 +0300] [Job 11] Connected to 10.11.11.200:631 (IPv4) (local port 1023)... D [19/May/2008:10:50:33 +0300] [Job 11] lpd_command 02 lp2 D [19/May/2008:10:50:33 +0300] [Job 11] Sending command string (5 bytes)... D [19/May/2008:10:50:33 +0300] [Job 11] Reading command status... D [19/May/2008:10:50:33 +0300] Discarding unused printer-state-changed event... D [19/May/2008:10:50:33 +0300] [Job 11] lpd_command returning 13 E [19/May/2008:10:50:33 +0300] PID 4375 (/usr/lib64/cups/backend/lpd) stopped with status 1! D [19/May/2008:10:50:33 +0300] [Job 11] File 0 is complete. I [19/May/2008:10:50:33 +0300] [Job 11] Backend returned status 1 (failed) D [19/May/2008:10:50:33 +0300] Discarding unused printer-state-changed event... D [19/May/2008:10:50:33 +0300] Discarding unused printer-stopped event... I [19/May/2008:10:50:33 +0300] Saving printers.conf... D [19/May/2008:10:50:33 +0300] Discarding unused job-stopped event... ==> /var/log/cups/page_log <== lp2 peter 11 [19/May/2008:10:50:33 +0300] 1 1 - localhost ==> /var/log/cups/access_log <== localhost - - [19/May/2008:10:50:37 +0300] "POST /printers/ HTTP/1.1" 200 254 CUPS-Get-Printers successful-ok localhost - - [19/May/2008:10:50:37 +0300] "POST /classes/ HTTP/1.1" 200 224 CUPS-Get-Classes successful-ok localhost - - [19/May/2008:10:50:37 +0300] "POST /printers/ HTTP/1.1" 200 112 CUPS-Get-Default successful-ok localhost - - [19/May/2008:10:50:37 +0300] "POST / HTTP/1.1" 200 372 Get-Jobs successful-ok ==> /var/log/cups/error_log <== D [19/May/2008:10:50:37 +0300] cupsdAcceptClient: 11 from localhost (Domain) D [19/May/2008:10:50:37 +0300] cupsdReadClient: 11 POST /printers/ HTTP/1.1 D [19/May/2008:10:50:37 +0300] cupsdAuthorize: No authentication data provided. D [19/May/2008:10:50:37 +0300] CUPS-Get-Printers D [19/May/2008:10:50:37 +0300] cupsdProcessIPPRequest: 11 status_code=0 (successful-ok) D [19/May/2008:10:50:37 +0300] cupsdCloseClient: 11 D [19/May/2008:10:50:37 +0300] cupsdAcceptClient: 11 from localhost (Domain) D [19/May/2008:10:50:37 +0300] cupsdReadClient: 11 POST /classes/ HTTP/1.1 D [19/May/2008:10:50:37 +0300] cupsdAuthorize: No authentication data provided. D [19/May/2008:10:50:37 +0300] CUPS-Get-Classes D [19/May/2008:10:50:37 +0300] cupsdProcessIPPRequest: 11 status_code=0 (successful-ok) D [19/May/2008:10:50:37 +0300] cupsdCloseClient: 11 D [19/May/2008:10:50:37 +0300] cupsdAcceptClient: 11 from localhost (Domain) D [19/May/2008:10:50:37 +0300] cupsdReadClient: 11 POST /printers/ HTTP/1.1 D [19/May/2008:10:50:37 +0300] cupsdAuthorize: No authentication data provided. D [19/May/2008:10:50:37 +0300] CUPS-Get-Default D [19/May/2008:10:50:37 +0300] cupsdProcessIPPRequest: 11 status_code=0 (successful-ok) D [19/May/2008:10:50:37 +0300] cupsdCloseClient: 11 D [19/May/2008:10:50:37 +0300] cupsdAcceptClient: 11 from localhost (Domain) D [19/May/2008:10:50:37 +0300] cupsdReadClient: 11 POST / HTTP/1.1 D [19/May/2008:10:50:37 +0300] cupsdAuthorize: No authentication data provided. D [19/May/2008:10:50:37 +0300] Get-Jobs ipp://localhost:631/printers/lp2 D [19/May/2008:10:50:37 +0300] cupsdProcessIPPRequest: 11 status_code=0 (successful-ok) D [19/May/2008:10:50:37 +0300] cupsdCloseClient: 11 -- Peter Nixon http://peternixon.net/ --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

2 2

[opensuse-factory] inode size 256 cause a pain
by Tamas Sarga 20 May '08

20 May '08

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, I installed openSUSE 11 beta3 to my machine next to a 10.3. I set up bootloader to install grub of 11 to the root partition of it. My grub in the MBR already had an other linux entry. When I tried to boot I chose other linux in the MBR's grub menu, than I got root (hd0,1) Filesystem type is ext2fs partition type 0x83 configfile /boot/grub/menu.lst error 2: bad file or directory type ~From the release notes I got a clue that inode size changed, so I reinstalled 11 with 128 inode size of the / partition, and everything went well. What is the positive side of change of the inode size? The negative side I've seen already ;) The release notes only complain compatibility issues about few ext3 tools for example win's extfs, doesn't say that you have to install new grub to the MBR. Should I submit a bug report? Cheers, Tamas Sarga -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.4-svn0 (GNU/Linux) Comment: Using GnuPG with SUSE - http://enigmail.mozdev.org iD8DBQFILr7XsuVyj8v2Zy4RAsNkAJwPjep0no4mkqAhQWNkeygk6emzYwCgj2as tb+6Z02fNe+C2zmUOmkNyiE= =mA6F -----END PGP SIGNATURE----- --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

4 4

[opensuse-factory] new factory snapshot
by Stephan Kulow 19 May '08

19 May '08

Hi, http://ftp.suse.com/pub/projects/FactoryLiveCDs/ has new live cds as of today. Please note that it also has the first experimental release of live usb images. |plugin in usb stick |check dmesg output about the device name (e.g. sdc) |umount all possibly automounted file systems |bzip2 -cd <download>.raw.bz2 | dd of=/dev/<device_name> bs=4096 Please note that installing from an USB stick has his problems as yast recognizes the stick as hard disk, which has to be worked around by the user. As usual: if you find bugs with it, note the date of the snapshot in the bug report. Greetings, Stephan --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

6 11

[opensuse-factory] Can't config a printer via Yast
by Kevin Valko 19 May '08

19 May '08

Trying to set up a network (SMB) printer via Yast, using the latest factory packages... I can configure the settings, Yast confirms the connection to my SMB printer is valid when I click the button (in subsequent testing I even garbled the name of the SMB printer and my login credentials, just to see if it was actually testing, and it reported an error in both cases, so I know that it is communicating with my networked system), I proceed to the next screen and set things like the printer driver etc., but upon clicking Next, it returns me to the main screen, without my printer queue showing. I can do this a dozen times in a row. No error message or dialog displays, I just have no printer available. Could be that I'm being obtuse and overlooking something when configing, but regardless, just dumping me back to the initial screen without an error message or dialog is either a bug, or bad design. And since KDE 4.x lacks a printer config, I have no way of setting up my printer. FWIW, had no issues with network printing in 10.3, in that I know my printer is supported and I was able to print through the same SMB system via the network. Am I missing something, or is this a known issue...? Thanks in advance for any pointers or advice... Cheers, KV --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

3 2

[opensuse-factory] OS 11.0 beta3 problems
by Michael Born 19 May '08

19 May '08

Hello developers. I installed beta3 64bit on two computers (see below) and experienced the following problems. (I used the "minimal server"- Installation on PC1 and KDE4 for PC2) 1. Booting the beta3 DVD I tested the (F9)-speech feature. Then I selected language->german and started the installation. The installation started in textmode. When I did not press F9 in the beginning the installation would start in graphics mode. (tested on PC2) 2. YAST -> software installation (in the installation process and on the installed system): - No installed software is listed on the first screen (the installed packages should be listed). - seen on both PC1 and PC2 - When searching for a software package no activity/busy-sign is visible (so I don't know if YAST started searching, is still searching or did crash) - seen on both PC1 and PC2 - Selecting an installed package and clicking on the "files" tab shows "0 Files" (experienced this with the VirtualBox std and debug kernel drivers) - seen on PC2 3. VirtualBox doesn't work out of the box. I installed "VirtualBox-ose" with YAST. When I started VB, setup a VM and tried to start this VM, VB complained that the kernel driver was not installed. It suggested to me to run "/etc/init.d/vboxdrv setup". That shut down the VB driver and restarted it. Now I got a different error message - I have to belong to the group vboxusers. After joining the group I could install WinXP in my VM. - seen on PC2 Cheers Michael PC1: AMD Phenom 9600BE ASUS M2A-VM-HDMI BIOS 1603 (with the latest 1705 BIOS no installation - not even with "safe settings" - buggy BIOS) 2x1GB PC800 A-DATA 6GB IDE hdd Seagate SATA DVD-ROM Samsung PC2: Intel X3350 ASUS P5B Deluxe 4x1GB PC800 TakeMS 320GB SATA hdd Samsung SATA DVD-RW LiteON --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

2 1

[opensuse-factory] Beta2: bootloader talks to you (please test)
by Steffen Winterfeldt 19 May '08

19 May '08

Hi, as of beta2, the graphical bootloader (the one on the install media) supports speech output via pc-speaker. That is, it reads all menu items to you. This feature is mainly there to aid visual impaired people. It's still experimental and I'd like to get your feedback whether it works or not on your machine. To try it, simply press F9. (In the worst case, your machine will freeze at this point.) Please report positive (if any) and negative results. Thanks, Steffen --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

5 7

[opensuse-factory] applydeltaiso in coolo's repo for 10.3
by Volker Kuhlmann 19 May '08

19 May '08

The applydeltaiso from about a month ago fails on the beta3 KDE delta iso x86_64. There's a new one out yesterday for x86_64 (the i586 is missing - Stephan?). Installing it by update won't work though as the version numbers have gone backwards: '%{NAME}-%{VERSION}-%{RELEASE}\t%{ARCH}\t%{BUILDTIME:date}\t%{DISTRIBUTION}\n' deltarpm-3.4-66.3 x86_64 Fri 16 May 2008 20:11:32 UTC home:coolo / openSUSE_10.3 deltarpm-3.4-66.3 x86_64 Fri 16 May 2008 20:11:32 UTC home:coolo / openSUSE_10.3 deltarpm-3.4-67.1 i586 Tue 29 Apr 2008 20:14:13 UTC home:coolo / openSUSE_10.3 deltarpm-3.4-67.1 x86_64 Tue 29 Apr 2008 20:10:53 UTC home:coolo / openSUSE_10.3 deltarpm-3.4-67.1 x86_64 Tue 29 Apr 2008 20:10:53 UTC home:coolo / openSUSE_10.3 The other related packages there have increasing version numbers. Volker -- Volker Kuhlmann is list0570 with the domain in header http://volker.dnsalias.net/ Please do not CC list postings to me. --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

2 3

[opensuse-factory] next sync
by Peter Czanik 19 May '08

19 May '08

Hello, When does the next factory sync come? There are some important PPC related bugs fixed I want to double check, but there wasn't a factory sync for almost a week now :-( Bye, CzP --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

1 0

[opensuse-factory] Beta versions ?
by Erik Jakobsen 19 May '08

19 May '08

Hi. Where can I find Betaversions ? --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

2 2

[opensuse-factory] beta 3 can't configure samba with swat
by Michael Steinhauser 19 May '08

19 May '08

I tried to configure samba with swat but it fails to do any changes. I can enter changes in swat but when i press "apply", everything is lost. It's the same behavior in opera and firefox. --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

2 1

[opensuse-factory] Include pcspkr as a module so we can disable it
by John M. Anderson 19 May '08

19 May '08

Some of us are very annoyed by the pc speaker when working in console and I think it'd be nice to just compile the pcspkr module in as a module that way it can be removed easily. Here is the bug report on this that was posted for 10.3: https://bugzilla.novell.com/show_bug.cgi?id=340657 --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

1 0

[opensuse-factory] factory == beta3?
by Andreas Klein 18 May '08

18 May '08

Hi, can you please annouce, when factory is Beta3? Will there be an snapshot like it was done for Beta1? Bye, -- Andreas Klein Andreas.C.Klein(a)physik.uni-wuerzburg.de --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

6 6

[opensuse-factory] B3 on R51
by James Tremblay 18 May '08

18 May '08

Guys, B3 is unbelievable, I downloaded the DVD ran the install as an upgrade from B1 and boom minutes later all is GOOOOOOD! I prefer Thunderbird over Evolution, went to software management looked up thunderbird click the install icon and it simply installed. The new gnome software management is incredibly easy to understand and works without a hitch so far. The new desktop effects management is also a mind blowingly easy to use and understand update. over the last several hours I have been impressed more times than I can count. You are an amazing team! -- James Tremblay aka, SLEducator Director of Technology Newmarket School District Newmarket NH 03857 Founder http://en.opensuse.org/education "Let's make a difference!" Registered Linux user #440182 CNE 3,4,5 CLP 9 CLE in training ;) --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

1 0

[opensuse-factory] Monitor support
by Robert Lewis 18 May '08

18 May '08

Any chance that I can talk SUSE into supporting the Samsung Synmaster 930B ? Ubuntu shows it in their list. --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

3 3

[opensuse-factory] Beta 3
by Robert Lewis 17 May '08

17 May '08

My keyboard (a MS ergonomic type) and mouse is not recognized at install time. It is a PS2 type and this has been an ongoing issue with almost every beta since 9.?. For some reason once the final shipping version surfaces then the PS2 keyboard works for me. Sort of discourages me from participating in the beta testing. I just found out that if I pull the PS2 type keyboard out and substitute a remote USB wireless keyboard and mouse that I can install the system. Even with the USB keyboard, if I select to verify the install DVD it loads the kernel (took keyboard request) but when it gets to an OK prompt after loading the kernel then the keyboard no longer works so I can't click on OK. However, the installation is working and I am impressed by the speed and simplicity of the install. Good job! I suspect once the install is complete I will be able to go back to the PS2 keyboard. Bob --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

1 0

[opensuse-factory] sux
by Robert Lewis 17 May '08

17 May '08

Anyone know why sux no longer works in SUSE 11 beta 2? It has always been with us in the past. Bob --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

6 6

[opensuse-factory] No console screens on 11.0 beta 3
by Jogchum Reitsma 17 May '08

17 May '08

When booting runlevel 5, after the graphical login screen comes up, the other ttys (01 - 06) remain black, no login prompt or cursor. Maybe this is a configuration thing, but I wouldn't know what. System is a Acer 1710 laptop, I add a compresses hwinfo.txt.

2 1

[opensuse-factory] I had a hard crash, possibly related to hibernation
by Carlos E. R. 17 May '08

17 May '08

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, I had been using factory all day. I tried hibernation, worked, thawing, worked... then I tried Yast to install some packages; I went out of the room for a minute and when I came back it was hard crashed. The screen was frozen, keyboard and mouse non operative (not even the leds). Had to hard reset. When I rebooted there was nothing at all in the logs. I had to rebuild the rpm database, it was corrupted in the crash. I use hibernation several times a day in version 10.3 with no problems (not in this class, anyway). Sometimes I keep the machine running for weeks continuously, there is no hardware problem here. Video is NVidia, but I'm using the open driver. This seems a software crash... I have no hard clue to it yet, but I'm suspecting something related to hibernation or triggered by it. - -- Cheers / Saludos, Carlos E. R. (from 11.0-factory) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.9 (GNU/Linux) Comment: Using GnuPG with SUSE - http://enigmail.mozdev.org iEYEARECAAYFAkgt5awACgkQU92UU+smfQXUFgCfTT5HOSMZLiCB+fjH+QvA4RgQ 4XcAn2tF5pi5KEgTs+gVKLxba0m86j8U =I4mL -----END PGP SIGNATURE----- --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

3 3

[opensuse-factory] IcedTea update problem
by Michal Vyskocil 17 May '08

17 May '08

Hi, the next icedtea (and a next openjdk, which will be released soon) update will fails, because it contains a fix for bnc#388578, which moves a directory %{libdir}/jvm-exports/java-1.7.0-icedtea to java-1.7.0-icedtea-%{version} and the java-1.7.0-icedtea will be a symlink on it. This situation is not permitted by rpm for upgrade, so the upgrade will fails with something like this error: unpacking of archive failed on file /usr/lib64/jvm-exports/java-1.7.0-icedtea: cpio: rename failed - Is a directory The icedtea and openjdk was not in a any of released product, so we've decided to apply a simply fix, which breaks an update. You should yust reinstall the package(s) to fix this error. Best Regards Michal Vyskocil --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

3 2

[opensuse-factory] Beta2 and mounting /tmp via tmpfs
by Jan Ritzerfeld 17 May '08

17 May '08

Hey, using 10.3, I added two lines to /etc/fstab, effectively moving /tmp and /var/tmp to ram via tmpfs: tmpfs /tmp tmpfs defaults,nosuid,noexec,nodev 0 0 tmpfs /var/tmp tmpfs defaults,nosuid,noexec,nodev 0 0 Using 11.0 Beta2 and the same lines on /etc/fstab, I can successfully mount /tmp and /var/tmp. However, on a reboot, they do not get automatically mounted---in contrast to 10.3. Any ideas? Gruß Jan -- You cannot strengthen the weak by weakening the strong. --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

1 1

[opensuse-factory] Banshee and Totem crash at watching video
by Kevin Dupuy 17 May '08

17 May '08

IN Beta 3, both Totem and Banshee crash as soon as I open a video. These, BTW, are videos that are playable in Totem and Banshee (an Ogg and an .AVI) In the console I'm getting the same error, so I wanted to share them with the list and hope you can advise me on how to proceed. -- Kevin "Yo" Dupuy | Public Mail <kevin.dupuy(a)opensuse.org> | Yo.media: 225-590-5961 Swift Change for a Green Future: Kat Swift for President www.VoteSwift.org kevin@linux:~/Desktop> totem --debug ALSA lib control.c:909:(snd_ctl_open_noupdate) Invalid CTL front:0 ALSA lib control.c:909:(snd_ctl_open_noupdate) Invalid CTL front:0 ALSA lib control.c:909:(snd_ctl_open_noupdate) Invalid CTL front:0 ALSA lib control.c:909:(snd_ctl_open_noupdate) Invalid CTL front:0 ALSA lib control.c:909:(snd_ctl_open_noupdate) Invalid CTL front:0 ALSA lib control.c:909:(snd_ctl_open_noupdate) Invalid CTL front:0 ALSA lib control.c:909:(snd_ctl_open_noupdate) Invalid CTL front:0 ALSA lib control.c:909:(snd_ctl_open_noupdate) Invalid CTL front:0 The program 'totem' received an X Window System error. This probably reflects a bug in the program. The error was 'BadAlloc (insufficient resources for operation)'. (Details: serial 50 error_code 11 request_code 140 minor_code 19) (Note to programmers: normally, X errors are reported asynchronously; that is, you will receive the error a while after causing it. To debug your program, run it with the --sync command line option to change this behavior. You can then get a meaningful backtrace from your debugger if you break on the gdk_x_error() function.)

1 0

[opensuse-factory] Beta3 on vmware: no hard disks found
by Marc Ensenbach 16 May '08

16 May '08

Hello, when trying to install Beta3 (x86_64) on a vmware machine, I get the error message "No hard disks were found for the installation" and the installation fails. This seems strange to me since on the same machine Beta2 was installable without problems. Can anyone reproduce this? Cheers, Marc --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

4 4

[opensuse-factory] Feature request: open-vm-tools as part of the release
by Sunny 16 May '08

16 May '08

Hi, I always try new test releases in a VMware virtual machines. The current opensuse 11.0 alpha 2 fails to compile the supplied vmware-tools modules, as the VMware package does not support 2.6.24 kernels. VMWare have open-sourced the tools here: http://open-vm-tools.sourceforge.net/ I have tried to build from these sources, and the modules build OK and integrated in 10.0 alpha2. So, I suggest that an rpm is build out of these sources, and included as standard with any opensuse release, so it can flawlessly be used in virtual machines. Is there a better place than this mailing list to post such a feature request? Like bugzilla, or something else? Cheers -- Svetoslav Milenov (Sunny) Even the most advanced equipment in the hands of the ignorant is just a pile of scrap. --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

6 12

Re: [opensuse-factory] factory to beta3 and other
by ¡ElCheVive! 16 May '08

16 May '08

2008/5/16 Putrycz, Erik <Erik.Putrycz(a)nrc-cnrc.gc.ca>: > Is there a simple way to upgrade from factory to beta3 and in the future > to the final release? > I'm not sure I always will want to live in factory land. > > Erik. If you are using the factory, you're already in beta3......and in "the future" you only have to change the repositories regards, Luiz --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

1 0

[opensuse-factory] kde related-bugs - notify on bugs.kde.org?
by Roberto Mannai 16 May '08

16 May '08

Hi all just a tip: should I notify the bug: https://bugzilla.novell.com/show_bug.cgi?id=384171 to the KDE bug tracking system (http://bugs.kde.org/)? Or is this superfluous? Ciao Rob --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

2 1