May 2008 - openSUSE Factory - openSUSE Mailing Lists

Fwd: Re: [opensuse-factory] Handykarte wird an USBnicht erkannt
by Michael Steinhauser 15 May '08

15 May '08

------- Forwarded message ------- From: "Michael Steinhauser" <mistr(a)online.de> To: "Ralf Prengel" <ralf.prengel(a)comline.de> Cc: Subject: Re: [opensuse-factory] Handykarte wird an USBnicht erkannt Date: Thu, 15 May 2008 12:32:44 +0200 Hi, sorry for my first post in german. I selected Data-Transfer mode on my phone. I pluged the phone by usb-cable. When I pluged the phone, nothing happened like bevor. But when i ran lsusb, my phone showed up a message about the card and the device got recognized. But only after lsusb. Here ma output after calling lsusb: Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 003: ID 0bda:8197 Realtek Semiconductor Corp. RTL8187B Wireless Adapter Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub and after some seconds: Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 004: ID 0421:04ed Nokia Mobile Phones Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 003: ID 0bda:8197 Realtek Semiconductor Corp. RTL8187B Wireless Adapter Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub dmesg brings then: usb 2-2: new full speed USB device using ohci_hcd and address 4 usb 2-2: configuration #1 chosen from 1 choice scsi8 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 4 usb-storage: waiting for device to settle before scanning usb 2-2: New USB device found, idVendor=0421, idProduct=04ed usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 2-2: Product: Nokia N95 usb 2-2: Manufacturer: Nokia usb 2-2: SerialNumber: 356962015523450 scsi 8:0:0:0: Direct-Access Nokia Nokia N95 1.0 PQ: 0 ANSI: 0 sd 8:0:0:0: [sdb] 3970048 512-byte hardware sectors (2033 MB) sd 8:0:0:0: [sdb] Write Protect is off sd 8:0:0:0: [sdb] Mode Sense: 03 00 00 00 sd 8:0:0:0: [sdb] Assuming drive cache: write through sd 8:0:0:0: [sdb] 3970048 512-byte hardware sectors (2033 MB) sd 8:0:0:0: [sdb] Write Protect is off sd 8:0:0:0: [sdb] Mode Sense: 03 00 00 00 sd 8:0:0:0: [sdb] Assuming drive cache: write through sdb: sdb1 sd 8:0:0:0: [sdb] Attached SCSI removable disk sd 8:0:0:0: Attached scsi generic sg2 type 0 usb-storage: device scan complete and is shown in the filemanager On Thu, 15 May 2008 09:26:20 +0200, Ralf Prengel <ralf.prengel(a)comline.de> wrote: > Michael Steinhauser schrieb: >> Hi, >> ich habe heute versucht, mein N95 an den Rechner anzuschliessen. Ich >> erhalte nur die Meldung aus dmesg: >> hub 2-0:1.0: unable to enumerate USB device on port 4. >> In 10.3 wurde die Karte des Gerätes als Ordner angezeigt. >> > > Which mode did you select on the phone? > whats says lsusb? > > Im using a N95 yesterday as UMTS-Modem without any problems using wvdial. > > > -- Using Opera's revolutionary e-mail client: http://www.opera.com/mail/ --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

1 0

[opensuse-factory] Handykarte wird an USBnicht erkannt
by Michael Steinhauser 15 May '08

15 May '08

Hi, ich habe heute versucht, mein N95 an den Rechner anzuschliessen. Ich erhalte nur die Meldung aus dmesg: hub 2-0:1.0: unable to enumerate USB device on port 4. In 10.3 wurde die Karte des Gerätes als Ordner angezeigt. --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

3 2

[opensuse-factory] Beta 2 and external USB HD
by Basil Chupin 15 May '08

15 May '08

I have an external USB HD attached. The HD is partitioned into a Linux and a Windows (NTFS) partition. When I switch on this HD, Beta2 does not recognise the Windows partition and comes up with an error message, "Mount: wrong fs type, bad option, bad superblock on /dev/sdd5, missing codepage or helper program, or other error In [sic] some cases useful useful info is found in syslog - try dmesg | tail or so". This problem has not occurred in 10.3 or earlier versions. I haven't tried doing the "dmesg | tail or so" thingie. But as I type this, I repeatedly keep getting on my screen the normal menu(s) which come up when a USB device is plugged in - which I then have to Cancel, but it keeps coming back. Nice. Any ideas why the Windows partition is not recognised, and how can this be recitifed? Ciao. PS Just had a look at dmesg | tail and found this: ntf8 is no longer supported use nls=utf8 Now, what has this got to do with me?! I just have a USB external HD and switch it on so why am I expected to "use nls=utf8" - somewhere, but I don't where. -- If you want to know what a man is like, take a look at how he treats his inferiors not his equals. --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

2 5

[opensuse-factory] libzypp.so.418()(64bit) missing..
by Oddball 14 May '08

14 May '08

Hi, conflicts text added. ignore the dutch text, just replace the words by those familiar to you. -- Enjoy your time around, Oddball (Now or never...) Besturingssysteem: Linux 2.6.25-19-default x86_64 Current user: oddball@AMD64x2-sfn1 System: openSUSE 11.0 (x86_64) Beta2 KDE: 4.0.3 (KDE 4.0.3) "release 18.2" #### YaST2 conflicts list - generated 2008-05-13 09:22:20 #### niets levert libzypp.so.418()(64bit) nodig door zypper-0.11.2-5.x86_64 [ ] zypper-0.11.2-5.x86_64 niet installeren niets levert libzypp.so.418()(64bit) nodig door zypper-0.11.2-5.x86_64 [ ] De volgende acties zullen uitgevoerd worden: libzypp-4.21.1-3.x86_64 niet installeren yast2-qt-pkg-2.16.40-6.x86_64 niet installeren [ ] De volgende acties zullen uitgevoerd worden: kde4-opensuse-updater-0.7.12-3.x86_64 niet installeren deïnstallatie van zypper-0.11.0-9.x86_64 deïnstallatie van kde4-opensuse-updater-0.7.1-3.4.x86_64 niets levert libzypp.so.418()(64bit) nodig door zypper-0.11.2-5.x86_64 [ ] De volgende acties zullen uitgevoerd worden: suseRegister-1.2-117.noarch niet installeren deïnstallatie van zypper-0.11.0-9.x86_64 deïnstallatie van kde4-opensuse-updater-0.7.1-3.4.x86_64 deïnstallatie van suseRegister-1.2-113.noarch [ ] De volgende acties zullen uitgevoerd worden: satsolver-tools-0.0.32-4.x86_64 niet installeren yast2-qt-pkg-2.16.40-6.x86_64 niet installeren yast2-installation-2.16.44-2.noarch niet installeren niets levert libzypp.so.418()(64bit) nodig door zypper-0.11.2-5.x86_64 [ ] De volgende acties zullen uitgevoerd worden: yast2-registration-2.16.2-7.noarch niet installeren deïnstallatie van suseRegister-1.2-113.noarch deïnstallatie van kde4-opensuse-updater-0.7.1-3.4.x86_64 deïnstallatie van yast2-registration-2.16.2-2.noarch [ ] yast2-ncurses-pkg-2.16.10-4.x86_64 niet installeren #### YaST2 conflicts list END ###

8 22

[opensuse-factory] yast2 broken in gnome
by Putrycz, Erik 14 May '08

14 May '08

iitm50ws1106:/var/log/YaST2 # /sbin/YaST2 Usage - y2controlcenter-gnome [-h] Options: -h : hide on start Useful if you want to autostart the control-center singleton so it can get all it's slow loading done Also the ntp configuration never starts... Erik. --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

2 1

[opensuse-factory] Can't install nvida or realtek kernel modules with 2.6.25.3-2 kernel
by Dave Plater 14 May '08

14 May '08

Hi, I cannot install either NVIDIA-Linux-x86-169.12-pkg1.run or realtek-linux-audiopack-5.01 with the factory kernel, I've also had no joy with the 2.6.25.2-2 kernel but downgrading to 2.6.24.1-6 again solves the problem and both work. Is this a bug to report or have I missed something. The last part of the failed nvidia installer log is as follows:- /usr/src/linux-2.6.25.3-2/include/linux/scatterlist.h: In function ‘sg_vir t’: /usr/src/linux-2.6.25.3-2/include/linux/scatterlist.h:199: warning: pointer of type ‘void *’ used in arithmetic In file included from /tmp/selfgz26719/NVIDIA-Linux-x86-169.12-pkg1/usr/src/ nv/nv-linux.h:109, from /tmp/selfgz26719/NVIDIA-Linux-x86-169.12-pkg1/usr/src/ nv/nv-vm.c:14: /usr/src/linux-2.6.25.3-2/include/linux/highmem.h: In function ‘zero_user_ segments’: /usr/src/linux-2.6.25.3-2/include/linux/highmem.h:134: warning: pointer of t ype ‘void *’ used in arithmetic /usr/src/linux-2.6.25.3-2/include/linux/highmem.h:134: warning: pointer of t ype ‘void *’ used in arithmetic /usr/src/linux-2.6.25.3-2/include/linux/highmem.h:134: warning: pointer of t ype ‘void *’ used in arithmetic /usr/src/linux-2.6.25.3-2/include/linux/highmem.h:134: warning: pointer of t ype ‘void *’ used in arithmetic /usr/src/linux-2.6.25.3-2/include/linux/highmem.h:137: warning: pointer of t ype ‘void *’ used in arithmetic /usr/src/linux-2.6.25.3-2/include/linux/highmem.h:137: warning: pointer of t ype ‘void *’ used in arithmetic /usr/src/linux-2.6.25.3-2/include/linux/highmem.h:137: warning: pointer of t ype ‘void *’ used in arithmetic /usr/src/linux-2.6.25.3-2/include/linux/highmem.h:137: warning: pointer of t ype ‘void *’ used in arithmetic /tmp/selfgz26719/NVIDIA-Linux-x86-169.12-pkg1/usr/src/nv/nv-vm.c: In functio n ‘nv_set_page_attrib_uncached’: /tmp/selfgz26719/NVIDIA-Linux-x86-169.12-pkg1/usr/src/nv/nv-vm.c:64: warning : ‘change_page_attr’ is deprecated (declared at include2/asm/cacheflush. h:27) /tmp/selfgz26719/NVIDIA-Linux-x86-169.12-pkg1/usr/src/nv/nv-vm.c: In functio n ‘nv_set_page_attrib_cached’: /tmp/selfgz26719/NVIDIA-Linux-x86-169.12-pkg1/usr/src/nv/nv-vm.c:79: warning : ‘change_page_attr’ is deprecated (declared at include2/asm/cacheflush. h:27) /tmp/selfgz26719/NVIDIA-Linux-x86-169.12-pkg1/usr/src/nv/nv-vm.c: In functio n ‘nv_flush_caches’: /tmp/selfgz26719/NVIDIA-Linux-x86-169.12-pkg1/usr/src/nv/nv-vm.c:364: error: implicit declaration of function ‘global_flush_tlb’ make[4]: *** [/tmp/selfgz26719/NVIDIA-Linux-x86-169.12-pkg1/usr/src/nv/nv-vm .o] Error 1 make[3]: *** [_module_/tmp/selfgz26719/NVIDIA-Linux-x86-169.12-pkg1/usr/src/ nv] Error 2 make[2]: *** [sub-make] Error 2 NVIDIA: left KBUILD. nvidia.ko failed to build! make[1]: *** [module] Error 1 make: *** [module] Error 2 -> Error. ERROR: Unable to build the NVIDIA kernel module. ERROR: Installation has failed. Please see the file '/var/log/nvidia-installer.log' for details. You may find suggestions on fixing installation problems in the README available on the Linux driver download page at www.nvidia.com. Regards Dave P --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

6 8

[opensuse-factory] cpio Files ?
by Günther J. Niederwimmer 14 May '08

14 May '08

Hello, what is the different from a 10.3 rpm and a 11.0 rpm ? I can open on a 10.3 System, the 10.3 rpm's Files with mc (CONTENTS.cpio) ;). After Update the cpio / mc rpm from Factory (with build) I can open from Factory the *.src.rpm file, But I have a error when I open from Factory the rpm Files (CONTENTS.cpio), bad end of File ? Have I to do any other updates? On a Beta2 System I have no Problem to open a rpm from 11.0 ? -- mit freundlichen Grüßen / best Regards Günther J. Niederwimmer --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

5 6

[opensuse-factory] wrong system time if no NTP (local hwclock)
by Felix Miata 14 May '08

14 May '08

1 /etc/adjtime from my 10.2 server: 0.000101 1204753900 0.000000 1204753900 LOCAL /etc/adjtime from the Factory box I was using today: 0.000234 1210343800 0.000000 1210343800 LOCAL Both are multiboot systems with the hardware clock set to local (GMT-0400) time. Why are they different? 2 I've searched Bugzilla, and don't seem to have found anything open on point, unless https://bugzilla.novell.com/show_bug.cgi?id=384254 is it, in which case it needs a much better summary. (No manual entry for nscd). I have NTP (and NSCD) set to start only in runlevels 3 & 5, since in 1 & 2 there is no network. /etc/sysconfig/clock contains HWCLOCK="--localtime", SYSTOHC="yes", TIMEZONE="America/New_York", DEFAULT_TIMEZONE="US/Eastern". When I boot to runlevel 2, the system time has the time zone offset doubled. When GMT is noon, and localtime is 08:00, the system time booted to Factory is 04:00, even though hwclock and hwclock --localtime both correctly show 08:00. Only after upping runlevel to 3 or 5, which starts NTP, is the system time correct. Surely I'm not the only one seeing this. System was last updated around 00:00 local on 09 May. Anyone know which Bugzilla bug this is, and how one would tell? I'm thinking 384254 could be it, because https://bugzilla.novell.com/show_bug.cgi?id=385296#c5 was duped to it, and following the instruction there seems to have eliminated the problem of wrong clock unless NTP is running. But, 384254 is about as clear as mud regarding what it is actually about. -- ". . . . in everything, do to others what you would have them do to you . . . ." Matthew 7:12 NIV Team OS/2 ** Reg. Linux User #211409 Felix Miata *** http://fm.no-ip.com/ --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

5 5

[opensuse-factory] webpin
by Günther J. Niederwimmer 13 May '08

13 May '08

Hello, is webpin broken ? only rpm's are found on 10.3 OSS ? -- mit freundlichen Grüßen / best Regards Günther J. Niederwimmer --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

1 0

[opensuse-factory] Display problem on NVIDIA FX 5200 DVI
by Joachim Reichelt 13 May '08

13 May '08

On an old FX Quadro card the display is unreadable using the DVI port. The pixels of e.g. "|" looks like: * * * * * * * * * * * * * * * * * * * * on the VGA port all is o.k. hwinfo: Unique ID: rdCR.gV6QWt3XSCC Hardware Class: framebuffer Model: "NVIDIA NV34 Board - p162-1n " Vendor: "NVIDIA Corporation" Device: "NV34 Board - p162-1n " SubVendor: "NVIDIA" nVidia Corporation NV34 [GeForce FX 5200] -- Joachim --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

1 0