April 2019

[opensuse-support] btrfs question
by Axel Braun 29 Apr '19

29 Apr '19

Hi, and another one regarding btrfs: fstrim is regulary running, and stopping the laptop going to suspend (which I usually only notice when the battery is empty...) fstrim is obviously triggered from systemd service btrfs-trim. For a for a 40GB btrfs partition it runs more than 2h on a Kingston-SSD! The second partition is a 850GB encrypted XFS partition - fstrim does not work on encrypted partitions w/o special settings in fstab. So the runtime must be related to the btrfs partition. … [View More]

2 2

[opensuse-support] snapper question
by Axel Braun 28 Apr '19

28 Apr '19

6 15

[opensuse-support] Fonts are not displayed right. XFCE, 15.1 Beta, Nvidia.
by Carlos E. R. 22 Apr '19

22 Apr '19

For example, in the XFCE terminal (default settings, except font size=11; black background as default), the '[' has a greenish tinct, and the ']' has a violet tinct. Previously I was using noveau with another theme, the tinct colours were a bit different. Now proprietary nvidia with theme "Eazel-blue". I try different themes, same issue. YaST, letters do not look very nice. Seem wires, too thin. Same hardware, with Leap 15.0, I don't notice these things. -- Cheers / Saludos, Carlos E. R.… [View More]

3 6

[opensuse-support] Erlang packages for Pleroma instance
by Maximilian Trummer 21 Apr '19

21 Apr '19

Hello, I'm trying to set up a Pleroma instance on Leap 15.0. Unfortunately there is no guide for openSUSE yet, so I'm going by the ones for Debian and CentOS[1][2]. The requirements are as follows (Debian's and CentOS' combined in one list): postgresql postgresql-contrib elixir erlang *erlang-dev* *erlang-tools* *erlang-parsetools* *erlang-xmerl* git build-essential I've marked the packages which are not immediately obvious to find on openSUSE. Is "erlang-dev" in Debian the same as openSUSE'… [View More]

1 0

[opensuse-support] Installation of FlightGear removes nvidia rpms. Leap 15.1 Beta
by Carlos E. R. 21 Apr '19

21 Apr '19

#### YaST2 conflicts list - generated 2019-04-21 12:35:14 #### FlightGear-2017.3.1-lp151.2.6.x86_64 requires libSimGearCore.so.2017.3.1()(64bit), but this requirement cannot be provided not installable providers: libSimGearCore-2017_3_1-2017.3.1-lp151.2.3.x86_64[download.opensuse.org-oss] [ ] do not install FlightGear-2017.3.1-lp151.2.6.x86_64 [ ] break FlightGear-2017.3.1-lp151.2.6.x86_64 by ignoring some of its dependencies [ ] Following actions will be done: deinstallation of … [View More]

1 1

[opensuse-support] How is chronyd using IPv6, when I don't have IPv6?
by Carlos E. R. 21 Apr '19

21 Apr '19

2019-04-21T00:19:00.637082+02:00 Elesar chronyd[2008]: Source 2001:720:1014:a202::2 replaced with 213.251.52.234 2019-04-21T00:48:52.674097+02:00 Elesar chronyd[2008]: Source 2001:720:1014:a201::2 replaced with 2001:720:1014:a202::2 2019-04-21T01:18:44.846401+02:00 Elesar chronyd[2008]: Source 2001:720:424:1::1:15 replaced with 2001:720:1014:a201::2 2019-04-21T01:48:37.325828+02:00 Elesar chronyd[2008]: Source 2001:720:1014:a205::2 replaced with 2001:720:424:1::1:15 2019-04-21T02:18:29.433522+… [View More]

1 1

[opensuse-support] Why is ModemManager probing for modems? I don't have any. Leap 15.1 Beta.
by Carlos E. R. 21 Apr '19

21 Apr '19

2019-04-21T12:07:40.174739+02:00 Elesar ModemManager[1233]: <info> Couldn't check support for device at '/sys/devices/pci0000:00/0000:00:1c.4/0000:06:00.0': not supported by any plugin 2019-04-21T12:07:40.176824+02:00 Elesar ModemManager[1233]: <info> Couldn't check support for device at '/sys/devices/pci0000:00/0000:00:1c.5/0000:07:00.0': not supported by any plugin -- Cheers / Saludos, Carlos E. R. (from openSUSE, Leap 15.1 x86_64 (ssd-test)) -- To … [View More]

1 0

[opensuse-support] Is thunderbird + enigmail working in Leap 15.1 Beta?
by Carlos E. R. 20 Apr '19

20 Apr '19

Hi, I added enigmail to the install on 15.1 (it was not installed by default), restarted Th, and when displaying a message that I know is PGP signed (I confirm by looking at the source), Thunderbird doesn't say anything about the signature. In fact, it removes from view the PGP inline blocks. I do not see entries in the preferences to activate PGP or PKCS. I'm compossing this, and if i click Options/sign, then the security options appear, but only for pkcs, not pgp. Also, on nntp … [View More]

2 2

[opensuse-support] Re: [opensuse-factory] New Tumbleweed snapshot 20190418 released!
by mh＠mike.franken.de 20 Apr '19

20 Apr '19

Hi *, [...] > kernel-source (5.0.7 -> 5.0.8) with this kernel the thunderbolt module is crashing leaving me without any peripheral devices. - notebook Dell Inc. XPS 13 9370/0F6P3V, BIOS 1.8.1 02/14/2019 - Thunderbolt docking station CalDigit TS3 Plus ------------------------< snip snip snip >----------------------------- Apr 19 20:27:58 thunder kernel: xhci_hcd 0000:3c:00.0: init 0000:3c:00.0 fail, -16 Apr 19 20:27:58 thunder kernel: xhci_hcd: probe of 0000:3c:00.0 failed with … [View More]error -16 Apr 19 20:27:58 thunder kernel: xhci_hcd 0000:3d:00.0: init 0000:3d:00.0 fail, -16 Apr 19 20:27:58 thunder kernel: xhci_hcd: probe of 0000:3d:00.0 failed with error -16 Apr 19 20:27:58 thunder kernel: xhci_hcd 0000:3e:00.0: init 0000:3e:00.0 fail, -16 Apr 19 20:27:58 thunder kernel: xhci_hcd: probe of 0000:3e:00.0 failed with error -16 ... Apr 19 20:29:32 thunder kernel: thunderbolt 0000:05:00.0: unexpected hop count: 1023 Apr 19 20:29:32 thunder kernel: ------------[ cut here ]------------ Apr 19 20:29:32 thunder kernel: thunderbolt 0000:05:00.0: interrupt for TX ring 0 is already enabled Apr 19 20:29:32 thunder kernel: WARNING: CPU: 7 PID: 1839 at drivers/thunderbolt/nhi.c:107 ring_interrupt_active+0x1ea/0x230 [thunderbolt] Apr 19 20:29:32 thunder kernel: Modules linked in: dca joydev pcspkr intel_wmi_thunderbolt wmi_bmof memstick thunderbolt(+) i2c_i801(+) soundcore rfkill roles mei intel_pch_thermal intel_lpss intel_soc_dts_iosf thermal(+) typec dell_wmi_descriptor battery pinctrl_sunrisepoint pinctrl_intel int3403_thermal int340x_thermal_zone int3400_thermal acpi_thermal_rel intel_hid sparse_keymap ac acpi_pad button pcc_cpufreq dm_crypt algif_skcipher af_alg crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel rtsx_pci_sdmmc mmc_core i915 i2c_algo_bit drm_kms_helper aesni_intel xhci_pci syscopyarea sysfillrect sysimgblt fb_sys_fops aes_x86_64 xhci_hcd crypto_simd cryptd glue_helper drm usbcore serio_raw rtsx_pci wmi i2c_hid video sg dm_multipath dm_mod scsi_dh_rdac scsi_dh_emc scsi_dh_alua loop efivarfs Apr 19 20:29:32 thunder kernel: CPU: 7 PID: 1839 Comm: systemd-udevd Not tainted 5.0.8-1-default #1 openSUSE Tumbleweed (unreleased) Apr 19 20:29:32 thunder kernel: Hardware name: Dell Inc. XPS 13 9370/0F6P3V, BIOS 1.9.0 03/12/2019 Apr 19 20:29:32 thunder kernel: RIP: 0010:ring_interrupt_active+0x1ea/0x230 [thunderbolt] Apr 19 20:29:32 thunder kernel: Code: c7 b0 00 00 00 48 89 14 24 e8 b2 5c fa c9 48 8b 14 24 4d 89 e9 45 89 f0 48 89 e9 48 89 c6 48 c7 c7 00 3e 66 c0 e8 90 e2 a3 c9 <0f> 0b e9 1d ff ff ff 44 03 62 60 e9 6b fe ff ff 41 0f b6 47 78 d3 Apr 19 20:29:32 thunder kernel: RSP: 0018:ffffb36a0239fa80 EFLAGS: 00010082 Apr 19 20:29:32 thunder kernel: RAX: 0000000000000044 RBX: 00000000ffffffff RCX: 0000000000000006 Apr 19 20:29:32 thunder kernel: RDX: 0000000000000007 RSI: 0000000000000086 RDI: ffff9ff7ae5d6a10 Apr 19 20:29:32 thunder kernel: RBP: ffffffffc0663424 R08: 0000000000000e96 R09: 0000000000000004 Apr 19 20:29:32 thunder kernel: R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000038200 Apr 19 20:29:32 thunder kernel: R13: ffffffffc0663413 R14: 0000000000000000 R15: ffff9ff78eb65840 Apr 19 20:29:32 thunder kernel: FS: 00007f9e44be4f80(0000) GS:ffff9ff7ae5c0000(0000) knlGS:0000000000000000 Apr 19 20:29:32 thunder kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 Apr 19 20:29:32 thunder kernel: CR2: 000055ef9f621608 CR3: 000000048ca0a003 CR4: 00000000003606e0 Apr 19 20:29:32 thunder kernel: Call Trace: Apr 19 20:29:32 thunder kernel: tb_ring_start+0xbf/0x1a0 [thunderbolt] Apr 19 20:29:32 thunder kernel: tb_ctl_start+0x25/0xa0 [thunderbolt] Apr 19 20:29:32 thunder kernel: tb_domain_add+0x5b/0x140 [thunderbolt] Apr 19 20:29:32 thunder kernel: ? icm_probe+0x133/0x2b0 [thunderbolt] Apr 19 20:29:32 thunder kernel: nhi_probe+0x2aa/0x380 [thunderbolt] Apr 19 20:29:32 thunder kernel: local_pci_probe+0x41/0x90 Apr 19 20:29:32 thunder kernel: pci_device_probe+0xf4/0x170 Apr 19 20:29:32 thunder kernel: really_probe+0xf8/0x3b0 Apr 19 20:29:32 thunder kernel: driver_probe_device+0xb3/0xf0 Apr 19 20:29:32 thunder kernel: __driver_attach+0xdd/0x110 Apr 19 20:29:32 thunder kernel: ? driver_probe_device+0xf0/0xf0 Apr 19 20:29:32 thunder kernel: bus_for_each_dev+0x63/0x90 Apr 19 20:29:32 thunder kernel: bus_add_driver+0x20d/0x220 Apr 19 20:29:32 thunder kernel: ? 0xffffffffc0677000 Apr 19 20:29:32 thunder kernel: driver_register+0x6b/0xb0 Apr 19 20:29:32 thunder kernel: ? 0xffffffffc0677000 Apr 19 20:29:32 thunder kernel: nhi_init+0x2b/0x1000 [thunderbolt] Apr 19 20:29:32 thunder kernel: do_one_initcall+0x46/0x1c8 Apr 19 20:29:32 thunder kernel: ? __vunmap+0x7a/0xb0 Apr 19 20:29:32 thunder kernel: do_init_module+0x5a/0x210 Apr 19 20:29:32 thunder kernel: load_module+0x1ab4/0x1f80 Apr 19 20:29:32 thunder kernel: ? __do_sys_finit_module+0x8f/0xd0 Apr 19 20:29:32 thunder kernel: __do_sys_finit_module+0x8f/0xd0 Apr 19 20:29:32 thunder kernel: do_syscall_64+0x60/0x110 Apr 19 20:29:32 thunder kernel: entry_SYSCALL_64_after_hwframe+0x49/0xbe Apr 19 20:29:32 thunder kernel: RIP: 0033:0x7f9e454f12f9 Apr 19 20:29:32 thunder kernel: Code: 00 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 6f 4b 0c 00 f7 d8 64 89 01 48 Apr 19 20:29:32 thunder kernel: RSP: 002b:00007ffe963329f8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 Apr 19 20:29:32 thunder kernel: RAX: ffffffffffffffda RBX: 000055ef9f63b100 RCX: 00007f9e454f12f9 Apr 19 20:29:32 thunder kernel: RDX: 0000000000000000 RSI: 00007f9e4566689d RDI: 0000000000000006 Apr 19 20:29:32 thunder kernel: RBP: 0000000000000000 R08: 0000000000000000 R09: 000055ef9f60e930 Apr 19 20:29:32 thunder kernel: R10: 0000000000000006 R11: 0000000000000246 R12: 00007f9e4566689d Apr 19 20:29:32 thunder kernel: R13: 0000000000020000 R14: 000055ef9f615980 R15: 000055ef9f63b100 Apr 19 20:29:32 thunder kernel: ---[ end trace 56ff5a7b4c34381f ]--- Apr 19 20:29:32 thunder kernel: ------------[ cut here ]------------ Apr 19 20:29:32 thunder kernel: thunderbolt 0000:05:00.0: interrupt for RX ring 0 is already enabled Apr 19 20:29:32 thunder kernel: WARNING: CPU: 7 PID: 1839 at drivers/thunderbolt/nhi.c:107 ring_interrupt_active+0x1ea/0x230 [thunderbolt] Apr 19 20:29:32 thunder kernel: Modules linked in: dca joydev pcspkr intel_wmi_thunderbolt wmi_bmof memstick thunderbolt(+) i2c_i801(+) soundcore rfkill roles mei intel_pch_thermal intel_lpss intel_soc_dts_iosf thermal(+) typec dell_wmi_descriptor battery pinctrl_sunrisepoint pinctrl_intel int3403_thermal int340x_thermal_zone int3400_thermal acpi_thermal_rel intel_hid sparse_keymap ac acpi_pad button pcc_cpufreq dm_crypt algif_skcipher af_alg crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel rtsx_pci_sdmmc mmc_core i915 i2c_algo_bit drm_kms_helper aesni_intel xhci_pci syscopyarea sysfillrect sysimgblt fb_sys_fops aes_x86_64 xhci_hcd crypto_simd cryptd glue_helper drm usbcore serio_raw rtsx_pci wmi i2c_hid video sg dm_multipath dm_mod scsi_dh_rdac scsi_dh_emc scsi_dh_alua loop efivarfs Apr 19 20:29:32 thunder kernel: CPU: 7 PID: 1839 Comm: systemd-udevd Tainted: G W 5.0.8-1-default #1 openSUSE Tumbleweed (unreleased) Apr 19 20:29:32 thunder kernel: Hardware name: Dell Inc. XPS 13 9370/0F6P3V, BIOS 1.9.0 03/12/2019 Apr 19 20:29:32 thunder kernel: RIP: 0010:ring_interrupt_active+0x1ea/0x230 [thunderbolt] Apr 19 20:29:32 thunder kernel: Code: c7 b0 00 00 00 48 89 14 24 e8 b2 5c fa c9 48 8b 14 24 4d 89 e9 45 89 f0 48 89 e9 48 89 c6 48 c7 c7 00 3e 66 c0 e8 90 e2 a3 c9 <0f> 0b e9 1d ff ff ff 44 03 62 60 e9 6b fe ff ff 41 0f b6 47 78 d3 Apr 19 20:29:32 thunder kernel: RSP: 0018:ffffb36a0239fa80 EFLAGS: 00010082 Apr 19 20:29:32 thunder kernel: RAX: 0000000000000044 RBX: 00000000ffffffff RCX: 0000000000000006 Apr 19 20:29:32 thunder kernel: RDX: 0000000000000007 RSI: 0000000000000086 RDI: ffff9ff7ae5d6a10 Apr 19 20:29:32 thunder kernel: RBP: ffffffffc066342c R08: 0000000000000eca R09: 0000000000000004 Apr 19 20:29:32 thunder kernel: R10: 0000000000000000 R11: 0000000000000001 R12: 000000000003827c Apr 19 20:29:32 thunder kernel: R13: ffffffffc0663413 R14: 0000000000000000 R15: ffff9ff78eb653c0 Apr 19 20:29:32 thunder kernel: FS: 00007f9e44be4f80(0000) GS:ffff9ff7ae5c0000(0000) knlGS:0000000000000000 Apr 19 20:29:32 thunder kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 Apr 19 20:29:32 thunder kernel: CR2: 000055ef9f621608 CR3: 000000048ca0a003 CR4: 00000000003606e0 Apr 19 20:29:32 thunder kernel: Call Trace: Apr 19 20:29:32 thunder kernel: tb_ring_start+0xbf/0x1a0 [thunderbolt] Apr 19 20:29:32 thunder kernel: tb_ctl_start+0x2f/0xa0 [thunderbolt] Apr 19 20:29:32 thunder kernel: tb_domain_add+0x5b/0x140 [thunderbolt] Apr 19 20:29:32 thunder kernel: ? icm_probe+0x133/0x2b0 [thunderbolt] Apr 19 20:29:32 thunder kernel: nhi_probe+0x2aa/0x380 [thunderbolt] Apr 19 20:29:32 thunder kernel: local_pci_probe+0x41/0x90 Apr 19 20:29:32 thunder kernel: pci_device_probe+0xf4/0x170 Apr 19 20:29:32 thunder kernel: really_probe+0xf8/0x3b0 Apr 19 20:29:32 thunder kernel: driver_probe_device+0xb3/0xf0 Apr 19 20:29:32 thunder kernel: __driver_attach+0xdd/0x110 Apr 19 20:29:32 thunder kernel: ? driver_probe_device+0xf0/0xf0 Apr 19 20:29:32 thunder kernel: bus_for_each_dev+0x63/0x90 Apr 19 20:29:32 thunder kernel: bus_add_driver+0x20d/0x220 Apr 19 20:29:32 thunder kernel: ? 0xffffffffc0677000 Apr 19 20:29:32 thunder kernel: driver_register+0x6b/0xb0 Apr 19 20:29:32 thunder kernel: ? 0xffffffffc0677000 Apr 19 20:29:32 thunder kernel: nhi_init+0x2b/0x1000 [thunderbolt] Apr 19 20:29:32 thunder kernel: do_one_initcall+0x46/0x1c8 Apr 19 20:29:32 thunder kernel: ? __vunmap+0x7a/0xb0 Apr 19 20:29:32 thunder kernel: do_init_module+0x5a/0x210 Apr 19 20:29:32 thunder kernel: load_module+0x1ab4/0x1f80 Apr 19 20:29:32 thunder kernel: ? __do_sys_finit_module+0x8f/0xd0 Apr 19 20:29:32 thunder kernel: __do_sys_finit_module+0x8f/0xd0 Apr 19 20:29:32 thunder kernel: do_syscall_64+0x60/0x110 Apr 19 20:29:32 thunder kernel: entry_SYSCALL_64_after_hwframe+0x49/0xbe Apr 19 20:29:32 thunder kernel: RIP: 0033:0x7f9e454f12f9 Apr 19 20:29:32 thunder kernel: Code: 00 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 6f 4b 0c 00 f7 d8 64 89 01 48 Apr 19 20:29:32 thunder kernel: RSP: 002b:00007ffe963329f8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 Apr 19 20:29:32 thunder kernel: RAX: ffffffffffffffda RBX: 000055ef9f63b100 RCX: 00007f9e454f12f9 Apr 19 20:29:32 thunder kernel: RDX: 0000000000000000 RSI: 00007f9e4566689d RDI: 0000000000000006 Apr 19 20:29:32 thunder kernel: RBP: 0000000000000000 R08: 0000000000000000 R09: 000055ef9f60e930 Apr 19 20:29:32 thunder kernel: R10: 0000000000000006 R11: 0000000000000246 R12: 00007f9e4566689d Apr 19 20:29:32 thunder kernel: R13: 0000000000020000 R14: 000055ef9f615980 R15: 000055ef9f63b100 Apr 19 20:29:32 thunder kernel: ---[ end trace 56ff5a7b4c343820 ]--- Apr 19 20:29:32 thunder kernel: thunderbolt 0000:05:00.0: ICM firmware is in wrong mode: 15 ------------------------< snip snip snip >----------------------------- Any idea? TIA. Bye. Michael. -- Michael Hirmke -- To unsubscribe, e-mail: opensuse-support+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-support+owner(a)opensuse.org [View Less]

1 1

[opensuse-support] user disappeared
by Adam Mizerski 16 Apr '19

16 Apr '19

Hi, I've got an odd problem, that probably deserves a bug report, but I don't know where to start looking for evidence. I'm running openSUSE 15.0 "transactional server" on a vps. I had freenet daemon installed, running as a dedicated "freenet" user. What happened is that the "freenet" user suddenly disappeared. It's not mentioned in /etc/passwd, /etc/shadow nor /etc/group. If I do "ls -l" in /home/freenet, there are numbers instead of owner and group. Service obviously fails to start. I had … [View More]

5 10

[opensuse-support] Virtualbox on TW does not start
by Axel Braun 08 Apr '19

08 Apr '19

Hi, after some weeks, and being on TW 20190401, I was about to create a new Virtual Box for testing. The new box cant be started, as it claims that 'Kernel driver not installed (rc=-1908)' suplibOsInit what: 3 VERR_VM_DRIVER_NOT_INSTALLED (-1908) - The support driver is not installed. On linux, open returned ENOENT. T520:/home/docb # zypper se -i virtualbox S | Name | Zusammenfassung | Typ ---+-----------------------------+----------------------… [View More]

3 3

[opensuse-support] Hundreds of coredumps, fast.
by Carlos E. R. 08 Apr '19

08 Apr '19

I saw this in the log, just after it had finished happening: <3.6> 2019-04-08 13:56:17 Telcontar systemd 1 - - Started Process Core Dump (PID 6572/UID 0). <3.6> 2019-04-08 13:56:17 Telcontar systemd-coredump 6573 - - Resource limits disable core dumping for process 6571 (single). <1.2> 2019-04-08 13:56:17 Telcontar systemd-coredump 6573 - - Process 6571 (single) of user 1000 dumped core. <3.6> 2019-04-08 13:56:32 Telcontar systemd 1 - - Started Process Core Dump (… [View More]

1 0

[opensuse-support] Unresponsive desktop
by Carlos E. R. 08 Apr '19

08 Apr '19

Hi, Last December I reported this problem on my laptop, and now my desktop also exhibits it. After several days running, this morning it locked as soon as I changed workspaces. I noticed kswapd0 was busy long time, and that firefox had about 10 gigs of virtual memory. The disk activity led was solid blue. I couldn't find out more, the machine froze and had to be hard rebooted. A week before it also froze, but that time I could not observe anything. -- Cheers / Saludos, Carlos E. R. (… [View More]

9 45

[opensuse-support] Permission on USB
by Christian Schmitz 08 Apr '19

08 Apr '19

Hi everyone: I have a opensuse tumbleweed, and i use the chip programmer PICKIT2, PICKIT3 via usb. Sometimes at boot the permission are right 664 but when the programmer is replugged or rebooted the permissions are only root 600. I suspect that i have a problem with udev rules file atached. If i check for conflict with any other rule GREP only find manufacturer id match with: /etc/udev/rules.d/010_mchp_tools.rules DMESG say that is discovered as usb HID Best Regards. Christian Info extra:… [View More]

3 2

[opensuse-support] Bug 1131689 - keepassxc: Recent upgrade makes it unusable due to changing established keybindings
by Manfred Hollstein 06 Apr '19

06 Apr '19

Hi there, in case you feel messed around by the recent update (it was an upgrade actually!) of package "keepassxc", please look at <https://bugzilla.opensuse.org/show_bug.cgi?id=1131689> and vote your opinion. Cheers. l8er manfred

2 3

[opensuse-support] After upgrade to 15.0, restore from hibernation crashes the machine.
by Carlos E. R. 05 Apr '19

05 Apr '19

Black display, keyboard light responds initially, then not. ssh from another machine says there is no route to machine (works instantly after reboot). Means that network is dead on desktop. Log: <10.6> 2019-01-10 20:20:01 Telcontar cron 27759 - - pam_unix(crond:session): session opened for user cer by (uid=0) <10.6> 2019-01-10 20:20:02 Telcontar CRON 27759 - - pam_unix(crond:session): session closed for user cer <3.6> 2019-01-10 20:23:50 Telcontar systemd 1 - - Reached … [View More]target Sleep. <3.6> 2019-01-10 20:23:50 Telcontar systemd 1 - - Starting Hibernate... <0.7> 2019-01-10 20:23:50 Telcontar kernel - - - [117583.419978] PM: Hibernation mode set to 'platform' <3.6> 2019-01-10 20:23:50 Telcontar systemd-sleep 27981 - - INFO: running /usr/lib/systemd/system-sleep/grub2.sleep for hibernate <3.6> 2019-01-10 20:23:50 Telcontar systemd-sleep 27981 - - INFO: Running prepare-grub .. <3.6> 2019-01-10 20:23:50 Telcontar systemd-sleep 27981 - - 2019-01-10 20:23:50+01:00 - Hibernating the system now... <3.4> 2019-01-10 20:23:50 Telcontar systemd-sh - - - Hibernating the system now... <3.6> 2019-01-10 20:23:50 Telcontar systemd-sleep 27981 - - service: no such service upsd.service <3.6> 2019-01-10 20:23:51 Telcontar systemd-sleep 27981 - - running kernel is grub menu entry openSUSE Leap 15.0 (vmlinuz-4.12.14-lp150.12.28-default) <3.6> 2019-01-10 20:23:51 Telcontar systemd-sleep 27981 - - preparing boot-loader: selecting entry openSUSE Leap 15.0, kernel /boot/4.12.14-lp150.12.28-default <3.6> 2019-01-10 20:23:56 Telcontar systemd-sleep 27981 - - running /usr/sbin/grub2-once "openSUSE Leap 15.0" <3.6> 2019-01-10 20:23:56 Telcontar systemd-sleep 27981 - - time needed for sync: 5.2 seconds, time needed for grub: 0.2 seconds. <3.6> 2019-01-10 20:23:56 Telcontar systemd-sleep 27981 - - INFO: Done. <3.6> 2019-01-10 20:23:56 Telcontar systemd-sleep 27981 - - Suspending system... <0.6> 2019-01-10 20:23:57 Telcontar kernel - - - [117590.115929] PM: Syncing filesystems ... 2019-01-11 11:07:16+01:00 - Booting the system now ================================================================================ Linux Telcontar 4.12.14-lp150.12.28-default #1 SMP Mon Dec 3 16:46:15 UTC 2018 (b91289f) x86_64 x86_64 x86_64 GNU/Linux <3.6> 2019-01-11 11:07:18 Telcontar systemd 1 - - systemd 234 running in system mode. (+PAM -AUDIT +SELINUX -IMA +APPARMOR -SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT -GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD -IDN2 -IDN default-hierarchy=hybrid) Hibernation has worked in this machine reliably for about a decade - till 15.0 :-( -- Cheers / Saludos, Carlos E. R. (from 15.0 x86_64 at Telcontar) [View Less]

4 14

[opensuse-support] Docking station - extending ports of HP notebooks
by Vojtěch Zeisek 04 Apr '19

04 Apr '19

Hi, I need to extend ports available on HP ProBook 650 G2 and HP X2 210 G2 (both running TW) by something like HP USB-C Travel HUB, HP USB-C Mini Dock #AC3,HP Spectre USB-C, HP USB-C mini dock or HP USB-C Universal Dock + 4.5mm and USB Dock Adapter. They are connected to the notebook via USB-C and extend ports available in the notebook. Do You have experiences with that? Is it well supported? Does it reliably work with anything You connect via the dock? I need charging of the notebook (… [View More]

2 3

[opensuse-support] ??firewall?? problem
by Patrick Shanahan 03 Apr '19

03 Apr '19

my local server is running Leap 42.2 all local machines may connect to the server, except one, 192.168.1.10 192.168.1.10 is my main workstation and connected fine until 08:36am this morning local time -4 utc. no software change nor noted system abnormality, except the open ssh windows on 192.168.1.10 froze, would not accept input. ping fails both ways. stopping SuSEfirewall2 on the server allows connection and ping succeedes both ways server -> 192.168.1.10 and 192.168.1.10 -> server (… [View More]

5 36

[opensuse-support] 15.0 most boots halt in emergency mode
by Felix Miata 01 Apr '19

01 Apr '19

# inxi -b System: Host: i2134 Kernel: 4.12.14-lp150.12.48-default x86_64 bits: 64 Desktop: Trinity R14.0.6 Distro: openSUSE Leap 15.0 Machine: Type: Desktop System: Apple product: iMac7,1 v: 1.0 serial: QP7440XDX89 Mobo: Apple model: Mac-F42386C8 v: PVT serial: 1 UEFI: Apple v: IM71.88Z.007A.B03.0803051705 date: 03/05/08 CPU: Dual Core: Intel Core2 Duo T7700 type: MCP speed: 1794 MHz min/max: 800/2400 MHz Graphics: Device-1: Advanced Micro Devices [AMD/ATI] RV630/M76 [… [View More]

5 19

[opensuse-support] How can I get nvidia.ko installed in 15.0?
by Carlos E. R. 01 Apr '19

01 Apr '19

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 startx complains it could not modprobe nvidia.ko. The module does not exist. Telcontar:~ # rpm -ql nvidia-gfxG03-kmp-default | less /etc/modprobe.d/nvidia-default.conf /lib/modules/4.12.14-lp150.11-default /lib/modules/4.12.14-lp150.11-default/updates /lib/modules/4.12.14-lp150.11-default/updates/nvidia.ko <-- /usr/lib/nvidia ... But it is not there. Why? Telcontar:~ # l /lib/modules/4.12.14-lp150.11-default/updates total 8 drwxr-xr-x 2 … [View More]root root 4096 Oct 12 15:55 ./ drwxr-xr-x 3 root root 4096 Mar 29 12:42 ../ Telcontar:~ # I look into the rpm with mc, and the file is not there. How can I then create it? How can I find why it was not created? There is nothing in the log. [...] I install the rpm manually. I get this: Telcontar:/data/storage_c/repositorios_zypp/15_0/download.nvidia.com-leap/x86_64 # rpm --install --force nvidia-gfxG03-kmp-default-340.107_k4.12.14_lp150.11-lp150.12.1.x86_64.rpm make: *** /usr/src/linux-obj/x86_64/default: No such file or directory. Stop. make: *** /usr/src/linux-obj/x86_64/default: No such file or directory. Stop. /usr/src/kernel-modules/nvidia-340.107-default / NVIDIA: calling KBUILD... make[1]: *** /lib/modules//source: No such file or directory. Stop. NVIDIA: left KBUILD. nvidia.ko failed to build! make: *** [Makefile:192: nvidia.ko] Error 1 / install: cannot stat '/usr/src/kernel-modules/nvidia-340.107-default/nvidia.ko': No such file or directory depmod: WARNING: could not open modules.order at /lib/modules/4.12.14-lp150.11-default: No such file or directory depmod: WARNING: could not open modules.builtin at /lib/modules/4.12.14-lp150.11-default: No such file or directory Modprobe blacklist files have been created at /etc/modprobe.d to prevent Nouveau from loading. This can be reverted by deleting /etc/modprobe.d/nvidia-*.conf. .... then it goes on with dracut. As you can see, the make procedure failed, yet YaST said nothing and continues with dracut, making one think that everything was alright. The local problem is here: Telcontar:/data/storage_c/repositorios_zypp/15_0 # Telcontar:/usr/src/linux-obj/x86_64 # l default lrwxrwxrwx 1 root root 47 Mar 28 19:39 default -> ../../linux-4.12.14-lp151.22-obj/x86_64/default Telcontar:/usr/src/linux-obj/x86_64 # Installation of the 15.0 kernel after removing 15.1 kernel did not make the correct link. - -- Cheers Carlos E. R. (from 42.2 x86_64 "Malachite" at Telcontar) -----BEGIN PGP SIGNATURE----- iHoEARECADoWIQQZEb51mJKK1KpcU/W1MxgcbY1H1QUCXJ5PxRwccm9iaW4ubGlz dGFzQHRlbGVmb25pY2EubmV0AAoJELUzGBxtjUfVIWAAniZ5TAdnHmB2wtHPA1Fi HK5WI1jkAJsEpVixYpqELfpEW8T51x5cepyEnQ== =3IXb -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse-support+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-support+owner(a)opensuse.org [View Less]

2 2

Main

Development

Information

Community

Social Media

Other

openSUSE Support