June 2019 - openSUSE Support - openSUSE Mailing Lists

[opensuse-support] Cannot complete registration with openSUSEforums
by JigsTheorem 13 Jun '20

13 Jun '20

Hi all I have a problem with Leap 15.1 and went to sign up with openSUSE forums. I received a validation email, which contained neatly ordered garbage but no validation code. The sender of this email is the webmaster from microfocus, but an email to that address just bounces. I have since discovered that openSUSE and microfocus are no longer associated. So, given that the validation process is broken, how do I get signed up to the forums? Regards JT -- To unsubscribe, e-mail: opensuse-support+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-support+owner(a)opensuse.org

8 14

[opensuse-support] broke zypper...
by mike 29 Jun '19

29 Jun '19

Hi, Just tried updating tumbleweed to the latest snapshot when it hung while installing btrfsmaintenance, so Cntrl-C 'd it (this has happened before).... Then zypper failed with zypper:error while loading shared libraries: libzypp.so.1709 no such file or directory... Is there a fix for this? Everything seems to work fine, but I'm sure I will need zypper !!!! Thanks, mike ps. I have no drives using the btrfs -- To unsubscribe, e-mail: opensuse-support+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-support+owner(a)opensuse.org

5 10

[opensuse-support] systemd-timesyncd failure (with solution)
by Peter Suetterlin 27 Jun '19

27 Jun '19

Hi list, just noticed my time was off - and found systemd-timesynced wasn't running woodstock:~ # systemctl status systemd-timesyncd.service ● systemd-timesyncd.service - Network Time Synchronization Loaded: loaded (/usr/lib/systemd/system/systemd-timesyncd.service; enabled; vendor preset: disabled) Active: failed (Result: exit-code) since Tue 2019-06-25 16:04:16 WEST; 11s ago Docs: man:systemd-timesyncd.service(8) Process: 4615 ExecStart=/usr/lib/systemd/systemd-timesyncd (code=exited, status=238/STATE_DIRECTORY) Main PID: 4615 (code=exited, status=238/STATE_DIRECTORY) If you experience the same, Arch Wiki[1] had the solution: # rm -rf /var/lib/systemd/timesync # rm -rf /var/lib/private/systemd/timesync After that it starts again. [1] https://wiki.archlinux.org/index.php/Systemd-timesyncd#systemd-timesyncd_fa… -- To unsubscribe, e-mail: opensuse-support+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-support+owner(a)opensuse.org

4 7

[opensuse-support] Tumbleweed: powermanagement on notebook always assumes low battery state
by mh＠mike.franken.de 26 Jun '19

26 Jun '19

Hi *, starting with the latest Tumbleweed snapshot 20190623, KDE powermanagement seems to assume a permanent low battery state on my notebook. The screen is switched off and the system is hibernated after the elapsed time, that has been configured for low battery state. For "on battery" and "on ac power" both settings are off. According to the powermanagement tray applet, there is enough battery for many hours, though, when the display is switched off and after a while the notebook is going to hibernate. Notebook is a DELL XPS 13 9370 docked to a Thunderbolt CalDigit TS3 Plus. An external monitor is connected to the Thunderbolt Dock via DisplayPort. I already opened a bug report, but perhaps someone here has the same problem or - even better - a solution :) Bye. Michael. -- Michael Hirmke -- To unsubscribe, e-mail: opensuse-support+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-support+owner(a)opensuse.org

2 4

[opensuse-support] geogebra doesn't start with TW
by Jogchum Reitsma 25 Jun '19

25 Jun '19

Hi, Running Tumbleweed, today's snapshot, geogebra refuses to start. As is for some months now. The log says: ========================================================================================== jun. 23, 2019 4:39:06 P.M. STDOUT: DEBUG: geogebra.common.i.o.z[-1]: Number of registered views = 1 * class geogebra.b.x jun. 23, 2019 4:39:06 P.M. STDOUT: DEBUG: geogebra.i.w.c[-1]: problem with getting GGT... jun. 23, 2019 4:39:06 P.M. STDOUT: DEBUG: geogebra.common.i.o.z[-1]: Number of registered views = 2 * class geogebra.b.x * class geogebra.gui.n.a jun. 23, 2019 4:39:06 P.M. STDERR: java.lang.ClassCastException: class jdk.internal.loader.ClassLoaders$AppClassLoader cannot be cast to class java.net.URLClassLoader (jdk.internal.loader.ClassLoaders$AppClassLoader and java.net.URLClassLoader are in module java.base of loader 'bootstrap') jun. 23, 2019 4:39:06 P.M. STDERR: at geogebra.j.b.a(Unknown Source) jun. 23, 2019 4:39:06 P.M. STDERR: at geogebra.j.g.<init>(Unknown Source) jun. 23, 2019 4:39:06 P.M. STDERR: at geogebra.i.a.a(Unknown Source) jun. 23, 2019 4:39:06 P.M. STDERR: at geogebra.i.a.<init>(Unknown Source) jun. 23, 2019 4:39:06 P.M. STDERR: at geogebra.i.a.<init>(Unknown Source) jun. 23, 2019 4:39:06 P.M. STDERR: at geogebra.gui.a.a.a(Unknown Source) jun. 23, 2019 4:39:06 P.M. STDERR: at geogebra.gui.a.a.a(Unknown Source) jun. 23, 2019 4:39:06 P.M. STDERR: at geogebra.gui.a.a.a(Unknown Source) jun. 23, 2019 4:39:06 P.M. STDERR: at geogebra.gui.a.a.a(Unknown Source) jun. 23, 2019 4:39:06 P.M. STDERR: at geogebra.gui.a.a.a(Unknown Source) jun. 23, 2019 4:39:06 P.M. STDERR: at geogebra.GeoGebra.a(Unknown Source) jun. 23, 2019 4:39:06 P.M. STDERR: at geogebra.GeoGebra.a(Unknown Source) jun. 23, 2019 4:39:06 P.M. STDERR: at geogebra.GeoGebra.main(Unknown Source) ==================================================================================== Is there something I can do to start geogebra? System is an AMD Ryzen, 16 GB mem. Any help will be greatly appreciated! Jogchum -- To unsubscribe, e-mail: opensuse-support+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-support+owner(a)opensuse.org

2 3

[opensuse-support] After update, no FF connection through privoxy although seemingly set up correctly. Complains about SSL too long
by stakanov 24 Jun '19

24 Jun '19

Firefox worked flawlessly via privoxy in 15.0. After update via net with repos, the new install works but not with privoxy activated. Everything gives obviously "page not found". Starting firefox in Safe mode does not change this, but: Secure Connection Failed An error occurred during a connection to p.p. SSL received a record that exceeded the maximum permissible length. Error code: SSL_ERROR_RX_RECORD_TOO_LONG is the answer to https//p.p. I checked if privoxy is running and no apparent problem: sudo systemctl status privoxy ● privoxy.service - Privoxy Web Proxy With Advanced Filtering Capabilities Loaded: loaded (/usr/lib/systemd/system/privoxy.service; enabled; vendor preset: disabled) Active: active (running) since Mon 2019-06-24 01:27:44 CEST; 5h 35min ago Process: 10819 ExecReload=/bin/kill -HUP $MAINPID (code=exited, status=0/ SUCCESS) Main PID: 1753 (privoxy) Tasks: 1 (limit: 4915) CGroup: /system.slice/privoxy.service └─1753 /usr/sbin/privoxy --chroot --pidfile /run/privoxy.pid --user privoxy /etc/config giu 24 01:27:43 roadrunner cp[1739]: /usr/bin/cp: impossibile eseguire stat di '/etc/resolv.conf': File o direct> giu 24 01:27:44 roadrunner systemd[1]: Started Privoxy Web Proxy With Advanced Filtering Capabilities. giu 24 01:28:19 roadrunner.suse systemd[1]: Reloading Privoxy Web Proxy With Advanced Filtering Capabilities. giu 24 01:28:19 roadrunner.suse systemd[1]: Reloaded Privoxy Web Proxy With Advanced Filtering Capabilities. giu 24 01:28:38 roadrunner.suse systemd[1]: Reloading Privoxy Web Proxy With Advanced Filtering Capabilities. giu 24 01:28:38 roadrunner.suse systemd[1]: Reloaded Privoxy Web Proxy With Advanced Filtering Capabilities. giu 24 01:56:03 roadrunner.suse systemd[1]: Reloading Privoxy Web Proxy With Advanced Filtering Capabilities. giu 24 01:56:03 roadrunner.suse systemd[1]: Reloaded Privoxy Web Proxy With Advanced Filtering Capabilities. giu 24 06:38:47 roadrunner.suse systemd[1]: Reloading Privoxy Web Proxy With Advanced Filtering Capabilities. giu 24 06:38:47 roadrunner.suse systemd[1]: Reloaded Privoxy Web Proxy With Advanced Filtering Capabilities. That was the output, I checked to make sure this is not resolv.conf related: sudo netconfig update -f did run without error, entries seem to be correct. Without setting FF to use privoxy pages load normaly in one user, but in a second user account, it does not load as expected. In this very user, when trying e.g. to set privoxy systemwide via KDE, privoxy gives "not being used". If forcing with manual settings this gives: Impossibile raggiungere il sito La pagina web all'indirizzo https://www.privoxy.org/config/ potrebbe essere temporaneamente non disponibile oppure è stata permanentemente spostata a un nuovo indirizzo web. ERR_TUNNEL_CONNECTION_FAILED Why would this be a tunnel? Somewhere must be an old setting that blocks all. Could anybody give me some hint how to sort this out? _________________________________________________________________ ________________________________________________________ Ihre E-Mail-Postf�cher sicher & zentral an einem Ort. Jetzt wechseln und alte E-Mail-Adresse mitnehmen! https://www.eclipso.de -- To unsubscribe, e-mail: opensuse-support+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-support+owner(a)opensuse.org

1 1

[opensuse-support] disable zypper snapshots?
by Peter Suetterlin 22 Jun '19

22 Jun '19

I wonder if there is a simple option to have a 'zypper dup' *not* create snapshots before and after the update. The update I just did (20190607->20190617) again was close to a full reinstall (3.4GB download), and despite 15GB free at start it ran out of space during the %postinstall scripts. The last big one (compiler/libc change) I could only perform by starting it, and then, from a second terminal, immediately manually delete the pre snapshot... I was skimming through snapper and zypper configs, but didn't find a solution. Was I blind, or does it really not exist? (The question is general, but especially relevant for Tumbleweed systems) -- To unsubscribe, e-mail: opensuse-support+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-support+owner(a)opensuse.org

2 2

[opensuse-support] changes in sftp chroot behavior between openSUSE 42.3 and 15.x
by Martin Sluka 21 Jun '19

21 Jun '19

Hello all, after upgrading from openSUSE Leap 42.3 to 15.1 we noticed that the SFTP accounts we set up for some webspaces do no longer work, e.g.: Jun 21 10:50:31 it-708 sshd[22545]: fatal: bad ownership or modes for chroot directory "/srv/www/vhosts/aktive/htdocs" I guess this is caused by your removal of [openssh-7.2p2-sftp_homechroot.patch] during the change * Do Jan 11 2018 pcerny(a)suse.com - Update to vanilla 7.6p1 …, which removed the following feature: | ChrootDirectory […] | In the special case when only sftp is used, not ssh nor scp, it | is possible to use ChrootDirectory %h or ChrootDirectory | /some/path/%u. The file system containing this directory must be | mounted with options nodev and either nosuid or noexec. The owner | of the directory should be the user. The ownership of the other | components of the path must fulfill the usual conditions. No adi- | tional files are required to be present in the directory. I wonder if the removal of this feature was intended (and why) or if this is maybe just an unwanted side effect of some refactoring. Any hints? Regards Martin --· Mensa in Deutschland e. V. Martin H. Sluka mailto:root@mensa.de -- To unsubscribe, e-mail: opensuse-support+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-support+owner(a)opensuse.org

1 0

[opensuse-support] fwiw: dl speeds just normalized
by Patrick Shanahan 15 Jun '19

15 Jun '19

normal dl speeds are back. -- (paka)Patrick Shanahan Plainfield, Indiana, USA @ptilopteri http://en.opensuse.org openSUSE Community Member facebook/ptilopteri Registered Linux User #207535 @ http://linuxcounter.net Photos: http://wahoo.no-ip.org/piwigo paka @ IRCnet freenode -- To unsubscribe, e-mail: opensuse-support+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-support+owner(a)opensuse.org

2 1

[opensuse-support] Tumbleweed USA extremely slow mirror?
by Steven Hess 15 Jun '19

15 Jun '19

Hi all I'm trying to pull down the latest Tumbleweed update via zypper -v dup I am getting almost no download speed. Going and looking at US mirrors I see there are almost none. Mirror brain is routing me to one that is seems slow to be useful. This is not my normal situation. Usually DL speed is just fine. As this Tumbleweed update is almost 1.5GB this could take weeks. What am I doing wrong if anything? Steven -- ____________ Apply appropriate technology. Use what works without prejudice. Steven L Hess ARS KC6KGE DM05gd22 Owner Flex-1500 and Flex-3000 Flex-6300, FT-857D, FT-817ND 927.0875Mhz and 441.125 analog 441.575 DMR &, 441.600 Fusion Repeaters Taft Ca. openSUSE Tumbleweed KDE Plasma with Packman -- To unsubscribe, e-mail: opensuse-support+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-support+owner(a)opensuse.org

5 5

2023

2022

2021

2020

2019

2018

openSUSE Support June 2019