Hi,
I've got an odd problem, that probably deserves a bug report, but I
don't know where to start looking for evidence.
I'm running openSUSE 15.0 "transactional server" on a vps. I had freenet
daemon installed, running as a dedicated "freenet" user.
What happened is that the "freenet" user suddenly disappeared. It's not
mentioned in /etc/passwd, /etc/shadow nor /etc/group. If I do "ls -l" in
/home/freenet, there are numbers instead of owner and group. Service
obviously fails to start.
I had a look at logs, but there's nothing alarming.
Do you have any clues, what could go wrong?
Recent logs for freenet service: http://susepaste.org/view/a0905f56
Systemd service file:
# /etc/systemd/system/freenet.service
[Unit]
Description=FreeNet Service
After=local-fs.target network.target time-sync.target
[Service]
User=freenet
Type=forking
WorkingDirectory=/home/freenet/Freenet/
ExecStart=/home/freenet/Freenet/run.sh start
ExecStop=/home/freenet/Freenet/run.sh stop
PIDFile=/home/freenet/Freenet/Freenet.pid
[Install]
WantedBy=multi-user.target
--
Adam Mizerski
Hi list,
had thought that all SSD actually had like 4kilobytes as physical
sector size and only 512bytes emulation stuff.
My leap 15.0 machine upgraded the hardware of the root disk to SSD
from HDD. fdisk -l now shows 512/512 for both logical and physical of
this root disk.
With the help of gparted distro, I have migrated, copied, over the /
and /home partitions from the old HDD to the new empty SSD. Created,
enlarged the partition sizes, and marked the / as bootable, and then
used the rescue system of Leap 15.0 bootmedia to mount all that stuff,
addtl proc sys and dev ans --rbind and then chroot into the system.
Then added some grub2 stuff to make the mbr bootinfo be written again
and at the end mkinitrd.
All went basically fine (using /dev/disk/by-uuid/ mostly everywhere in
/etc/default/grub and in /etc/fstab ).
I basically followed the suse.com KB articles:
<https://www.suse.com/de-de/support/kb/doc/?id=7018639>
<https://www.suse.com/de-de/support/kb/doc/?id=7018126>
But now I am wondering if I need to consider more stuff when making
the switch from HDD to SSD, or did I do bascially just fine?
fdisk shows as 512/512 as stated above and the bootlogging (dmesg -e
or journalctl -b ) show some weird stuff for this new SSD early during
bootup with those ata.1 lines printing some drivenotready or something
I can look up later to be precise.
This error didnt show when using the HDD. Now I wonder if my SSD is
too new for the sata chipset of the rather oldish motherboard or if
something else is missing.
Everything is working as AHCI according to bios and settings but I
never mess much with this.
Any hints into this?
TY.
--
To unsubscribe, e-mail: opensuse-support+unsubscribe(a)opensuse.org
To contact the owner, e-mail: opensuse-support+owner(a)opensuse.org
Hi,
Today's update of LibreOffice to 6.2.0.3:
I tried sorting in Calc, col B and A and the sort window gets unreadable.
OpenCL is not activated.
Test with a fresh table, sort A and B, result: sort window gets torn.
col A col B
1 a
2 b
3 c
System Tumbleweed with updates as they come.
Peter
--
To unsubscribe, e-mail: opensuse-support+unsubscribe(a)opensuse.org
To contact the owner, e-mail: opensuse-support+owner(a)opensuse.org
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Hi,
I get tons of these in the log, and the "uninitialized" ones go also to
the warning log.
<2.6> 2019-01-28 23:40:31 Telcontar spamd 16758 - - spamd: connection from localhost [127.0.0.1]:35696 to port 783, fd 6
<2.6> 2019-01-28 23:40:31 Telcontar spamd 16758 - - spamd: setuid to cer succeeded
<2.6> 2019-01-28 23:40:31 Telcontar spamd 16758 - - spamd: processing message <26edd7a4-9c65-0a7d-2d7d-289...> for cer:1000
<2.4> 2019-01-28 23:40:32 Telcontar spamd 16758 - - Use of uninitialized value $4 in concatenation (.) or string at /usr/lib/perl5/vendor_perl/5.26.1/Mail/SpamAssassin/Plugin/URIDNSBL.pm line 1044.
<2.4> 2019-01-28 23:40:32 Telcontar spamd 16758 - - Use of uninitialized value $3 in concatenation (.) or string at /usr/lib/perl5/vendor_perl/5.26.1/Mail/SpamAssassin/Plugin/URIDNSBL.pm line 1044.
<2.4> 2019-01-28 23:40:32 Telcontar spamd 16758 - - Use of uninitialized value $2 in concatenation (.) or string at /usr/lib/perl5/vendor_perl/5.26.1/Mail/SpamAssassin/Plugin/URIDNSBL.pm line 1044.
<2.4> 2019-01-28 23:40:32 Telcontar spamd 16758 - - dns: new_dns_packet (domain=...(.zen.spamhaus.org. type=A class=IN) failed: a domain name contains a null label
<2.4> 2019-01-28 23:40:32 Telcontar spamd 16758 - - Use of uninitialized value $4 in concatenation (.) or string at /usr/lib/perl5/vendor_perl/5.26.1/Mail/SpamAssassin/Plugin/URIDNSBL.pm line 1044.
<2.4> 2019-01-28 23:40:32 Telcontar spamd 16758 - - Use of uninitialized value $3 in concatenation (.) or string at /usr/lib/perl5/vendor_perl/5.26.1/Mail/SpamAssassin/Plugin/URIDNSBL.pm line 1044.
<2.4> 2019-01-28 23:40:32 Telcontar spamd 16758 - - Use of uninitialized value $2 in concatenation (.) or string at /usr/lib/perl5/vendor_perl/5.26.1/Mail/SpamAssassin/Plugin/URIDNSBL.pm line 1044.
<2.6> 2019-01-28 23:40:33 Telcontar spamd 16758 - - spamd: clean message (-2.5/5.0) for cer:1000 in 1.4 seconds, 11344 bytes.
<2.6> 2019-01-28 23:40:33 Telcontar spamd 16758 - - spamd: result: . -2 - BAYES_00,HEADER_FROM_DIFFERENT_DOMAINS,MAILING_LIST_MULTI,RCVD_IN_DNSWL_MED,RDNS_NONE scantime=1.4,size=11344,user=cer,uid=1000,required_score=5.0,rhost=localhost,raddr=127.0.0.1,rport=35696,mid=<26edd7a4-9c65-0a7d-2d7d-289f2049cdff(a)iinet.net.au>,bayes=0.000069,autolearn=disabled
<2.6> 2019-01-28 23:40:33 Telcontar spamd 3930 - - prefork: child states: BI
<2.6> 2019-01-28 23:40:33 Telcontar spamd 3930 - - spamd: handled cleanup of child pid [16758] due to SIGCHLD: exit 0
<2.6> 2019-01-28 23:40:33 Telcontar spamd 3930 - - spamd: server successfully spawned child process, pid 16792
<2.6> 2019-01-28 23:40:33 Telcontar spamd 3930 - - prefork: child states: II
<2.6> 2019-01-28 23:40:33 Telcontar spamd 3930 - - spamd: handled cleanup of child pid [16758] due to SIGCHLD: exit 0
<2.6> 2019-01-28 23:40:33 Telcontar spamd 3930 - - spamd: server successfully spawned child process, pid 16792
<2.6> 2019-01-28 23:40:33 Telcontar spamd 3930 - - prefork: child states: II
<2.6> 2019-01-28 23:40:34 Telcontar spamd 16774 - - spamd: connection from localhost [127.0.0.1]:35702 to port 783, fd 6
<2.6> 2019-01-28 23:40:34 Telcontar spamd 16774 - - spamd: setuid to cer succeeded
<2.6> 2019-01-28 23:40:34 Telcontar spamd 16774 - - spamd: processing message <5387304.rUZBsZdq...> for cer:1000
<2.4> 2019-01-28 23:40:34 Telcontar spamd 16774 - - Use of uninitialized value $4 in concatenation (.) or string at /usr/lib/perl5/vendor_perl/5.26.1/Mail/SpamAssassin/Plugin/URIDNSBL.pm line 1044, <GEN6687> line 265.
<2.4> 2019-01-28 23:40:34 Telcontar spamd 16774 - - Use of uninitialized value $3 in concatenation (.) or string at /usr/lib/perl5/vendor_perl/5.26.1/Mail/SpamAssassin/Plugin/URIDNSBL.pm line 1044, <GEN6687> line 265.
<2.4> 2019-01-28 23:40:34 Telcontar spamd 16774 - - Use of uninitialized value $2 in concatenation (.) or string at /usr/lib/perl5/vendor_perl/5.26.1/Mail/SpamAssassin/Plugin/URIDNSBL.pm line 1044, <GEN6687> line 265.
<2.4> 2019-01-28 23:40:34 Telcontar spamd 16774 - - dns: new_dns_packet (domain=...(.zen.spamhaus.org. type=A class=IN) failed: a domain name contains a null label
<2.4> 2019-01-28 23:40:34 Telcontar spamd 16774 - - Use of uninitialized value $4 in concatenation (.) or string at /usr/lib/perl5/vendor_perl/5.26.1/Mail/SpamAssassin/Plugin/URIDNSBL.pm line 1044, <GEN6687> line 265.
<2.4> 2019-01-28 23:40:34 Telcontar spamd 16774 - - Use of uninitialized value $3 in concatenation (.) or string at /usr/lib/perl5/vendor_perl/5.26.1/Mail/SpamAssassin/Plugin/URIDNSBL.pm line 1044, <GEN6687> line 265.
<2.4> 2019-01-28 23:40:34 Telcontar spamd 16774 - - Use of uninitialized value $2 in concatenation (.) or string at /usr/lib/perl5/vendor_perl/5.26.1/Mail/SpamAssassin/Plugin/URIDNSBL.pm line 1044, <GEN6687> line 265.
<2.6> 2019-01-28 23:40:35 Telcontar spamd 16774 - - spamd: clean message (-2.5/5.0) for cer:1000 in 1.4 seconds, 11408 bytes.
<2.6> 2019-01-28 23:40:35 Telcontar spamd 16774 - - spamd: result: . -2 - BAYES_00,HEADER_FROM_DIFFERENT_DOMAINS,MAILING_LIST_MULTI,MIME_QP_LONG_LINE,RCVD_IN_DNSWL_MED,RDNS_NONE scantime=1.4,size=11408,user=cer,uid=1000,required_score=5.0,rhost=localhost,raddr=127.0.0.1,rport=35702,mid=<5387304.rUZBsZdqEj(a)roadrunner.suse>,bayes=0.002213,autolearn=disabled
<2.6> 2019-01-28 23:40:35 Telcontar spamd 3930 - - prefork: child states: BI
<2.6> 2019-01-28 23:40:35 Telcontar spamd 3930 - - spamd: handled cleanup of child pid [16774] due to SIGCHLD: exit 0
It refers to this code:
sub lookup_dnsbl_for_ip {
my ($self, $pms, $obj, $ip) = @_;
local($1,$2,$3,$4);
$ip =~ /^(\d+)\.(\d+)\.(\d+)\.(\d+)$/;
my $revip = "$4.$3.$2.$1"; <============
my $conf = $pms->{conf};
my $tflags = $conf->{tflags};
my $cfns = $pms->{uridnsbl_active_rules_nsrevipbl};
my $cfa = $pms->{uridnsbl_active_rules_arevipbl};
foreach my $rulename (keys %$cfa, keys %$cfns) {
my $rulecf = $conf->{uridnsbls}->{$rulename};
# ips_only/domains_only lookups should not act on this kind of BL
next if defined $tflags->{$rulename} &&
$tflags->{$rulename} =~ /\b(?:ips_only|domains_only)\b/;
$self->lookup_single_dnsbl($pms, $obj, $rulename,
$revip, $rulecf->{zone}, $rulecf->{type});
}
}
- --
Cheers
Carlos E. R.
(from 15.0 x86_64 at Telcontar)
-----BEGIN PGP SIGNATURE-----
iHoEARECADoWIQQZEb51mJKK1KpcU/W1MxgcbY1H1QUCXE+LRhwccm9iaW4ubGlz
dGFzQHRlbGVmb25pY2EubmV0AAoJELUzGBxtjUfVIc8An03FgYIij2QPfc5/8iLM
TS0DUrDMAJ0ZDrhxw5WawheYday+sHeYLEYpTw==
=v4V6
-----END PGP SIGNATURE-----
--
To unsubscribe, e-mail: opensuse-support+unsubscribe(a)opensuse.org
To contact the owner, e-mail: opensuse-support+owner(a)opensuse.org
Hi,
I just wanted to see what I have in my private repository, and launched
zypper search -s -r Selfcompiled
It just ignores ignores the '-r' and lists packages from *all* enabled repos.
Which is some 50000 :((
Is it too late and I'm doing something wrong, or is the latest zypper broken?
--
To unsubscribe, e-mail: opensuse-support+unsubscribe(a)opensuse.org
To contact the owner, e-mail: opensuse-support+owner(a)opensuse.org
Hi,
I get a popup (paste fails, hand copy):
Probing LUKS failed
Unexpected situation found in the system.
Click below to see more details (English only)
Continue despite the error
[continue][abort][details]
Details gives another popup:
command '/sbin/udevadm info '/dev/disk/by-uuid/39334baa-94...." failed:
stderr:
Unknown device, --name=, --path=, or absolute path in /dev/ or /sys expected.
exit code:
4
Ideas?
(I do have the save_y2logs output to report a bug)
There is no /dev/disk/by-uuid/39334ba*, it corresponds to a disk that is not currently connected:
cer@Telcontar:~> grep 39334ba /etc/crypttab
cr_OldDatum /dev/disk/by-uuid/39334baa-941f-42ab-a0a4-7c20a427aff2 none noauto
cer@Telcontar:~>
cer@Telcontar:~> grep cr_OldDatum /etc/fstab
/dev/mapper/cr_OldDatum /data/OldDatum xfs noauto,nofail,lazytime 1 5
cer@Telcontar:~>
--
Cheers / Saludos,
Carlos E. R.
(from 15.0 x86_64 at Telcontar)
Hi,
I tried this, which had been working for a decade at least and is documented:
Telcontar:~ # cd /usr/src/linux
Telcontar:/usr/src/linux # make cloneconfig
make[1]: *** No rule to make target 'cloneconfig'. Stop.
make: *** [Makefile:569: cloneconfig] Error 2
Telcontar:/usr/src/linux #
What?
The documentation still says to use it:
/usr/share/doc/packages/kernel-source-4.12.14-lp150.12.45/README.SUSE:
«In addition, the running kernel exposes a gzip compressed version of its
configuration file as /proc/config.gz. The kernel sources can be
configured based on /proc/config.gz with ``make cloneconfig''.»
So, what should I use instead to get the same result? Perhaps copy /proc/config.gz to /usr/src/linux and expand it?
--
Cheers / Saludos,
Carlos E. R.
(from 15.0 x86_64 at Telcontar)
I get these errors in the cups log, and a popup error when I print:
E [18/Jan/2019:10:08:31 +0100] cp1510n_ps: File \"/Library/Printers/hp/Profiles/sRGB_A.icc\" not available: No such file or directory
E [18/Jan/2019:10:08:31 +0100] cp1510n_ps: File \"/Library/Printers/hp/Profiles/CMYK_A.icc\" not available: No such file or directory
E [18/Jan/2019:10:08:31 +0100] cp1510n_ps: File \"/Library/Printers/hp/Profiles/Gray_A.icc\" not available: No such file or directory
It is not the first time I see that error, but I do not remember what package should contain them, and google doesn't find them.
However, printing works.
--
Cheers / Saludos,
Carlos E. R.
(from 15.0 x86_64 at Telcontar)
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
I see this warning on the log:
<3.4> 2019-01-28 00:00:04 Telcontar systemd 1 - - Configuration file
/usr/lib/systemd/system/ipmiseld.service is marked executable. Please
remove executable permission bits. Proceeding anyway.
Indeed, it is:
Telcontar:~ # l /usr/lib/systemd/system/ipmiseld.service
- -rwxr-xr-x 1 root root 163 Apr 23 2018 /usr/lib/systemd/system/ipmiseld.service*
Telcontar:~ #
Is it worth a bugzilla?
- --
Cheers
Carlos E. R.
(from 15.0 x86_64 at Telcontar)
-----BEGIN PGP SIGNATURE-----
iHoEARECADoWIQQZEb51mJKK1KpcU/W1MxgcbY1H1QUCXE5Cuxwccm9iaW4ubGlz
dGFzQHRlbGVmb25pY2EubmV0AAoJELUzGBxtjUfVILcAnj5dprj8loj83dYLdjHN
DPTcb3wSAJ9VQ4zm7EAFoiP2OXO40R0gJQn/SQ==
=7y5l
-----END PGP SIGNATURE-----
--
To unsubscribe, e-mail: opensuse-support+unsubscribe(a)opensuse.org
To contact the owner, e-mail: opensuse-support+owner(a)opensuse.org
