January 2024 - openSUSE Support - openSUSE Mailing Lists

15.5, wireguard, resolve-dns.sh script not available? not needed anymore?
by cagsm 12 Apr '24

12 Apr '24

Support, a very simple 15.5 with wireguard, dynamic chaning public ipv4 addresses as endpoint hostname:port i am rather new to this, yet I am not aware if this script for tackling this situation > <https://github.com/WireGuard/wireguard-tools/blob/master/contrib/reresolve-…> is still part of the whole deal, as the wireguard-tools package rpm, does not list this file as its content on leap 15.5 is this deprecated? as maybe > <https://github.com/WireGuard/wireguard-monolithic-historical/blob/master/co…> hints? or whatever that state there means? I have just set up my wireguard with two peers total, so I will see within the next hours or days or so if this tunnel survives dns (ip) changes of the public ipv4 address (endpoint) and how this works. any experience with this on opensuse current versions? ----------- rpm -qi wireguard-tools --filesbypkg .... wireguard-tools /etc/wireguard wireguard-tools /usr/bin/wg wireguard-tools /usr/bin/wg-quick wireguard-tools /usr/lib/systemd/system/wg-quick.target wireguard-tools /usr/lib/systemd/system/wg-quick@.service wireguard-tools /usr/share/bash-completion/completions/wg wireguard-tools /usr/share/bash-completion/completions/wg-quick wireguard-tools /usr/share/doc/packages/wireguard-tools wireguard-tools /usr/share/doc/packages/wireguard-tools/README.md wireguard-tools /usr/share/licenses/wireguard-tools wireguard-tools /usr/share/licenses/wireguard-tools/COPYING wireguard-tools /usr/share/man/man8/wg-quick.8.gz wireguard-tools /usr/share/man/man8/wg.8.gz ------------- ty

3 15

VPN-Fun (this time with Wireguard)
by Axel Braun 22 Feb '24

22 Feb '24

Hi, after my recent experience with vpnc, which obviously does not support IPv6. I made another attempt with Wireguard, to connect to a IPv6 only host (DS-LITE connection). I could not get Strongswan for IPSec running. I followed the instructions of the FritzBox (6600 cable) and created a working Wireguard connection. At least it claims to work. Here is the startup protocoll: https://paste.opensuse.org/pastes/41e4656db770 So, if I'm on a IPv6 Telekom Connection and connect, it still shows Teleckm as provider (although VPN host is in via Vodafone) That means in fact it is not working! If I use an IPv4 connection it claims to work again, but same result - in fact it does not. Above log is from a IPv4 I tried to work this out with AVM support (Manufacturer of FritzBox), no success. Any ideas? Has anyone Wiresguard running (on TW)? Thanks Axel

3 19

Blank Login window fields and descriptors:
by -pj 30 Jan '24

30 Jan '24

Hi, after an update to Tumbleweed snapshot 20240125, the Login window entry field key character input and identification field listings are blank. In fact everything is blank for that matter including the user image. KDE Plasma Version: 5.27.10 KDE frameworks Version: 5.114.0 Qt Version: 5.15.12 Kernel Version: 6.7.1-1-pae (32-bit) Graphics Platform: X11 - Here's a picture of the current login window: https://paste.opensuse.org/pastes/c19b6215f700 Any thoughts on what or which package(s) caused this issue? Still able to login after entering password. -Regards

15 58

Where to report this problem, KDE or Bugzilla?
by -pj 30 Jan '24

30 Jan '24

Hi, After suspending then unsuspending the machine here. Prior open application titlebars are faded (grey in color) and path/location information on the title bar (left side) are a /barely/ legible faded grey in color as well. In order to see the active titlebar description correctly again, I have to open a new instance of the application or any application for that matter. This is going on with applications ranging from Kate to Firefox to KeepassXC. What is going on here? I am using only the default themes and colors found in the KDE desktop appearance options. Minimize and maximizing the window/s itself has no correction to the titlebars display. -Thanks

2 3

dhcpd migration to kea
by Togan Muftuoglu 28 Jan '24

28 Jan '24

Hi, As ISC has eoled dhcpd server and suggests kea instead, for the new server I am planning to switch to kea. AFAIK kea is not supporting LDAP but since I am not using it not an issue. Has any one made the migration and if so can you share the issues or experiences with kea compared to dhcpd server. Thanks Togan

1 0

rmt-cli mirror custom tumbleweed repo fails with gpg no public key error
by G McAlister 27 Jan '24

27 Jan '24

I use the repository mirroring tool (rmt) to maintain local copies of leap repositories (currently 15.4 and 15.5). I am trying to add the tumbleweed repositories to my local set but the rmt-server-mirror service fails with the following in the logs: Jan 26 10:06:40 rmt rmt-cli[1357]: WARN: GPG command: gpg --homedir /tmp/rmt-mirror-gpg20240126-1357-11gdkuz --no-default-keyring --keyring /tmp/rmt-mirror-gpg20240126-1357-11gdkuz/keyring --verify /tmp/d20240126-1357-oemuy5/repodata/repomd.xml.asc /tmp/d20240126-1357-oemuy5/repodata/repomd.xml 2>&1 Jan 26 10:06:40 rmt rmt-cli[1357]: WARN: GPG output: gpg: Signature made Wed Oct 11 10:51:21 2023 BST Jan 26 10:06:40 rmt rmt-cli[1357]: gpg: using RSA key 35A2F86E29B700A4 Jan 26 10:06:40 rmt rmt-cli[1357]: gpg: Can't check signature: No public key Jan 26 10:06:40 rmt rmt-cli[1357]: WARN: The following errors occurred while mirroring: Jan 26 10:06:40 rmt rmt-cli[1357]: WARN: Repository 'tw_update' (tw_update): Error while mirroring metadata: GPG signature verification failed. Jan 26 10:06:40 rmt rmt-cli[1357]: WARN: Mirroring completed with errors. The relevant lines from rmt-cli repos custom list are: | tw_non-oss | tw_non-oss | http://download.opensuse.org/tumbleweed/repo/non-oss/ | Not Mandatory | Mirror | 2024-01-26 10:06:39 UTC | | tw_oss | tw_oss | http://download.opensuse.org/tumbleweed/repo/oss/ | Not Mandatory | Mirror | 2024-01-26 10:06:36 UTC | | tw_update | tw_update | http://download.opensuse.org/update/tumbleweed/ | Not Mandatory | Mirror | | I have tried importing the public keys but, as the log message says, the gpg check is made using an ephemeral keyring and no others. Any thoughts on this?

2 2

Resume often fails with Nvidia graphics
by Bjoern Voigt 23 Jan '24

23 Jan '24

In the last months I often had the issue, that resume from hibernate fails. This is probably caused by a configuration issue with my Nvidia GeForce GTX 1050 Ti, but I am not sure. The configuration follows the recommendations in the NVIDIA-Linux-x86_64-545.29.02/README.txt file, chapter "Chapter 21. Configuring Power Management Support". I use the Nvidia RPM drivers 545.29.06 from nvidia-tumbleweed. # cat /etc/modprobe.d/nvidia.conf options nvidia NVreg_PreserveVideoMemoryAllocations=1 NVreg_TemporaryFilePath=/var/tmp The "dmesg" output shows a message "PreserveVideoMemoryAllocations module parameter is set. System Power Management attempted without driver procfs suspend interface. Please refer to the 'Configuring Power Management Support' section in the driver README." during resume. # dmesg -T [Wed Jan 10 16:43:51 2024] PM: Using 3 thread(s) for decompression [Wed Jan 10 16:43:51 2024] PM: Loading and decompressing image data (1118391 pages)... [Wed Jan 10 16:43:51 2024] PM: Image loading progress: 0% [Wed Jan 10 16:43:53 2024] PM: Image loading progress: 10% [Wed Jan 10 16:43:54 2024] PM: Image loading progress: 20% [Wed Jan 10 16:43:55 2024] PM: Image loading progress: 30% [Wed Jan 10 16:43:56 2024] PM: Image loading progress: 40% [Wed Jan 10 16:43:57 2024] PM: Image loading progress: 50% [Wed Jan 10 16:43:58 2024] PM: Image loading progress: 60% [Wed Jan 10 16:43:59 2024] PM: Image loading progress: 70% [Wed Jan 10 16:44:01 2024] PM: Image loading progress: 80% [Wed Jan 10 16:44:02 2024] PM: Image loading progress: 90% [Wed Jan 10 16:44:03 2024] PM: Image loading progress: 100% [Wed Jan 10 16:44:03 2024] PM: Image loading done [Wed Jan 10 16:44:03 2024] PM: hibernation: Read 4473564 kbytes in 11.29 seconds (396.24 MB/s) [Wed Jan 10 16:44:03 2024] PM: Image successfully loaded [Wed Jan 10 16:44:03 2024] printk: Suspending console(s) (use no_console_suspend to debug) [Wed Jan 10 16:44:03 2024] NVRM: GPU 0000:01:00.0: PreserveVideoMemoryAllocations module parameter is set. System Power Management attempted without driver procfs suspend interface. Please refer to the 'Configuring Power Management Support' section in the driver README. [Wed Jan 10 16:44:03 2024] nvidia 0000:01:00.0: PM: pci_pm_freeze(): nv_pmops_freeze+0x0/0x20 [nvidia] returns -5 [Wed Jan 10 16:44:03 2024] nvidia 0000:01:00.0: PM: dpm_run_callback(): pci_pm_freeze+0x0/0xc0 returns -5 [Wed Jan 10 16:44:03 2024] nvidia 0000:01:00.0: PM: failed to quiesce async: error -5 [Wed Jan 10 16:44:03 2024] PM: hibernation: Failed to load image, recovering. [Wed Jan 10 16:44:03 2024] PM: hibernation: Basic memory bitmaps freed [Wed Jan 10 16:44:03 2024] OOM killer enabled. [Wed Jan 10 16:44:03 2024] Restarting tasks ... done. [Wed Jan 10 16:44:03 2024] PM: hibernation: resume failed (-5) # systemctl list-dependencies systemd-hibernate.service systemd-hibernate.service ○ ├─nvidia-hibernate.service ○ ├─nvidia-resume.service ● ├─system.slice ○ └─sleep.target # systemctl status nvidia-hibernate.service ○ nvidia-hibernate.service - NVIDIA system hibernate actions Loaded: loaded (/usr/lib/systemd/system/nvidia-hibernate.service; enabled; preset: disabled) Active: inactive (dead) # systemctl status nvidia-resume.service ○ nvidia-resume.service - NVIDIA system resume actions Loaded: loaded (/usr/lib/systemd/system/nvidia-resume.service; enabled; preset: disabled) Active: inactive (dead) Any ideas? Björn

1 1

Latest zypper dup turned off all rear usb ports:
by -pj 22 Jan '24

22 Jan '24

I just zypper dup this morning on openSUSE Tumbleweed. Then I powercycled, logged into KDE - no mouse connectivity. Moved usb mouse to front usb port on the desktop now mouse is picked up and works. What happened here and how can this be fixed?

2 4

[slowroll] ## packages are going to be [downgraded,reinstalled]
by Felix Miata 22 Jan '24

22 Jan '24

This seems to be pretty routine here: # zypper -v dup ... The following 2 packages are going to be upgraded: ... The following 42 packages are going to be downgraded: ... The following 24 packages are going to be reinstalled: ... The following NEW package is going to be installed: ... The following 8 packages are going to be REMOVED: ... 2 packages to upgrade, 42 to downgrade, 1 new, 24 to reinstall, 8 to remove. Overall download size: 1.3 MiB. Already cached: 26.2 MiB. After the operation, 14.5 MiB will be freed. Continue? [y/n/v/...? shows all options] (y): Is this routine for most people running Slowroll, both lots of downgrades, and lots of reinstallations? It seems rather like churning more than upgrading. -- Evolution as taught in public schools is, like religion, based on faith, not based on science. Team OS/2 ** Reg. Linux User #211409 ** a11y rocks! Felix Miata

1 0

openSUSE KDE Live Rescue links failing:
by -pj 17 Jan '24

17 Jan '24

Hi, I do not know better where to report this right now. https://en.opensuse.org/openSUSE:Tumbleweed_installation#LiveCDs/Rescue_CD is unable to complete provide download for the following: KDE Live CD - i686 .iso *and* it's GPG signed sha-256. Is this because the 32 bit is not being maintained? Is there a i686 Live KDE Rescue CD available at another location? Where is the best place to locate checksums to verify these particular sha.256 files? Is the main Live DVD a better solution (for troubleshooting) generally since it provides network connection capability?😕 Thanks

2 1