July 2022 - openSUSE Support - openSUSE Mailing Lists

TAB, Delete, and Alt + TAB combo do not work in KDE????

by c. marlow

Open Suse Tumbleweed RedDragon Keyboard model K551-KR First time SUSE user! When hitting the tab key or trying to invoke ALT + TAB, or hitting the delete key above the arrow keys to delete a email in Evolution, nothing happens. Why do those keys not work on a fresh install of openSUSE? ================== Thanks, Chris Please send all off list messages to chris(a)cwm030.com

1 week, 5 days

7
36
0 0

Printing not using requested duplex setting

by Go Slowly Turtle

I am using: Operating System: openSUSE Tumbleweed 20220728 KDE Plasma Version: 5.25.3 KDE Frameworks Version: 5.96.0 Qt Version: 5.15.5 Kernel Version: 5.18.11-1-default (64-bit) Graphics Platform: X11 Processors: 4 × Intel® Core™ i7-7500U CPU @ 2.70GHz Memory: 15.5 GiB of RAM Graphics Processor: Mesa Intel® HD Graphics 620 Manufacturer: Dell Inc. Product Name: Inspiron 15-7579 I never had a problem switching between none and duplex printing until recently. Now, whenever I request duplex print mode, it now always prints single sheet mode. The printer is a Brother HL-2270DW. I have upgraded to the latest Brother drivers, created a 'new' printer to use, yet the problem persists. I tried printing under Windows 10, which works perfectly, so it does not look like a H/W problem. I have reconfigured cups and the printer using YAST. It still does not work correctly. I have looked in CUPS configuration files but found nothing I could see to be a problem. To get it to print duplex I have to go to the printer (via IP address and browser) to specifically set duplex mode. Then I have to unset it back afterwards. Alas, I am not fully conversant with printer configuring so I am at the end of what I can try. Can anyone help or has anyone had this problem and got past it? It used to work fine but no longer. Help...... -- \ ^ / 0 Turtle / v \ wame nuttauwadtuongash

2 weeks

4
5
0 0

TW printing problem: Unable to auto-configure PostScript Printer - no bidirectional I/O available!

by Axel Braun

Working on sorting out some printing issues in MicroOS Desktop, I wanted to set-up teh same configuration on a clean, fresh TW host (running in Virtualbox, but that should not matter): Installation of Brother MFC9340CDW printer driver (worked) test print - filter failed changed cups log-level to debug, and got the relevant lines: [Job 4] 192.168.1.103=192.168.1.103 [Job 4] backendWaitLoop(snmp_fd=5, addr=0x561a87426138, side_cb=0x561a86529b80) [Job 4] Unable to auto-configure PostScript Printer - no bidirectional I/O available! [Job 4] PID 7447 (/usr/lib/cups/filter/commandtops) stopped with status 1. PID 7446 (/usr/lib/cups/cgi-bin/jobs.cgi) exited with no errors. [Job 4] PID 7448 (/usr/lib/cups/backend/lpd) exited with no errors. cupsdMarkDirty(----S) cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files" [Job 4] Job stopped due to filter errors; please consult the /var/log/cups/error_log file for details. cupsdMarkDirty(---J-) (full log: https://paste.opensuse.org/39597437 ) Funny enough, the same printer works on my TW host..... .ppd files are the same, I could not spot a difference so far. Search in the net stated basically 'delete cups, gutenprint, etc and reinstall', but I feel that cant be the solution Hints anyone?

2 weeks

2
4
0 0

podman-compose

by Thomas Vatter

OpenSuse Build Service podman-compose from home:stroeder:sys project Download Package 15.4 has an Error Message: "The requested URL is no longer available on this server and there is no forwarding address. If you followed a link from a foreign page, please contact the author of this page." The URL is https://download.opensuse.org/repositories/SUSE:/SLE-15-SP4:/GA/standard/[1] The folder SLE-15-SP4: does not exist Regards Thomas Vatter Network Inventory Software Suse-Partner, RedHat-Partner www.network-inventory.eu Tel. 030-79782510 E-Mail thomas.vatter(a)network-inventory.eu -------- [1] https://download.opensuse.org/repositories/SUSE:/SLE-15-SP4:/GA/standard/

2 weeks

2
1
0 0

[TW] SSH No route to host

by Bob Williams

Operating system Tumbleweed; desktop KDE Plasma. I can ssh into my desktop machine from my phone (using JuiceSSH) using the local LAN address 192.168.178.48 When I try to ssh to my ISP static address, I get 'no route to host'. This also happens to a colleague trying to connect from another city (ie. from outside my LAN). I have moved my ssh port to a higher number, no longer 22. This is set in /etc/ssh/sshd_config and /etc/services. The port is forwarded to this machine in my router (Fritz!Box 7530). The higher port is opened in firewalld with protocol TCP. I get the same 'no route to host' if I disable the firewall. I am not convinced the port is really open to the world, although ssh within the LAN is working. Nmap scan report for aaa-bbb-ccc-ddd.dsl.in-addr.zen.co.uk (aaa.bbb.ccc.ddd) Host is up (0.0060s latency). Not shown: 995 filtered tcp ports (no-response) PORT STATE SERVICE 113/tcp closed ident 873/tcp open rsync 1080/tcp closed socks 5060/tcp open sip 8089/tcp open unknown When I visit https://www.whatsmyip.org/port-scanner/ and ask it to scan my ssh port number it times out, whereas for comparison it confirms 873 immediately. SSH from elsewhere into this machine used to work (running Leap, but I doubt that makes a difference). Have I forgotten a setting somewhere? Are there other tests to run? Bob -- Bob Williams No HTML please. Plain text preferred. https://useplaintext.email/

2 weeks, 2 days

6
17
0 0

15.4, python-urlgrabber always failing? kde updater still showing it and failing it?

by cagsm

Support, what happen? a grep for this package in zypp//history log file brings up only stuff from 2021 back leap 15.3 I guess still rpm shows rpm -qi python-urlgrabber Name : python-urlgrabber Version : 3.9.1 Release : 1.37 Architecture: noarch Install Date: Wed 28 Apr 2021 07:59:09 PM CEST Group : Development/Languages/Python Size : 304495 License : LGPL-2.1 Signature : RSA/SHA256, Sat 26 May 2018 07:45:08 PM CEST, Key ID 70af9e8139db7c82 Source RPM : python-urlgrabber-3.9.1-1.37.src.rpm Build Date : Sat 26 May 2018 07:45:01 PM CEST Build Host : sheep10 Relocations : (not relocatable) Packager : https://www.suse.com/ Vendor : SUSE LLC <https://www.suse.com/> URL : http://urlgrabber.baseurl.org Summary : A high-level cross-protocol url-grabber Description : A high-level cross-protocol url-grabber for python supporting HTTP, FTP and file locations. Features include keepalive, byte ranges, throttling, authentication, proxies and more. Distribution: SUSE Linux Enterprise 15 and the kde software updater in the tray clock area shows one update, SLE-15.4-2022-2487 (1) and it can not be applied always returns with this package update popup and then fail. across reboots across everything error message in small fail window can be copied: the to be installed patch:openSUSE-SLE-15.4-2022-2487-1.noarch conflicts with 'python-urlgrabber.noarch rpm -aq | grep -i grabber python-urlgrabber-3.9.1-1.37.noarch what now? oddly though zypper ref and zypper lu dont show this stuff at all. ty

3 weeks, 1 day

5
6
0 0

Leap 15.3 update received 7/18

by mark neidorff

3 weeks, 1 day

7
13
0 0

MirrorCache redirects to wrong servers

by Maximilian Trummer

I have set my zypper to use the new MirrorCache redirector. I'm using the european servers: >https://en.opensuse.org/MirrorCache#Setting_up_MirrorCache_for_your_machine >mirrorcache-eu.opensuse.org has European mirrors only First, I'm being redirected to >https://ftp.kddilabs.jp/Linux/packages/opensuse/debug/tumbleweed/repo/oss/ why? As far as I know, Japan is not in Europe. Then I get redirected to >http://ftp-srv2.kddilabs.jp/Linux/packages/opensuse/debug/tumbleweed/repo/o… which throws an exception because of the https -> http downgrade: > Retrieving repository 'openSUSE-Tumbleweed-Debug' metadata > ...................................................................[error] > Repository 'openSUSE-Tumbleweed-Debug' is invalid. > [repo-debug|https://mirrorcache-eu.opensuse.org/debug/tumbleweed/repo/oss/] > Valid metadata not found at specified URL> > History: > - Download (curl) error for 'https://mirrorcache-eu.opensuse.org/debug/tumbleweed/repo/oss/repodata/1c92…': > Error code: Unsupported protocol or redirect (Location: > http://ftp-srv2.kddilabs.jp/Linux/packages/opensuse/debug/tumbleweed/rep > o/oss/repodata/1c92b1536363bed4d5cc8f1d8d54becf1105301e326033601cf10168a3 > 00da41-primary.xml.gz) Error message: Redirect to protocol "http" not > supported or disabled in libcurl> > - Can't provide > ./repodata/1c92b1536363bed4d5cc8f1d8d54becf1105301e326033601cf10168a300da4 > 1-primary.xml.gz> > Please check if the URIs defined for this repository are pointing to a valid > repository I have tried manually downloading the package index it with cURL: >$ curl -O -v https://mirrorcache-eu.opensuse.org/debug/tumbleweed/repo/oss/repodata/1c92… This redirects me to a the japanese host on https (not http). So why am I being redirected to a japanese server, and why is zypper redirected to http, but not cURL? regards

3 weeks, 2 days

3
4
0 0

Please help on a gcc error

by Marco Calistri

Hi, I'm trying to compile a program from source I stuck on these errors and so far I have been able to find the root cause: [87%] Linking CXX executable record_time_signal/usr/lib64/gcc/x86_64-suse-linux/12/../../../../x86_64-suse-linux/bin/ld: cannot find -ludev: File or directory does not existcollect2: error: ld returned 1 exit statusgmake [6]: *** [CMakeFiles / record_time_signal.dir / build.make: 132: record_time_signal] Error 1gmake [5]: *** [CMakeFiles / Makefile2: 1309: CMakeFiles / record_time_signal.dir / all] Error 2gmake [4]: *** [Makefile: 156: all] Error 2gmake [3]: *** [CMakeFiles / wsjtx-install.dir / build.make: 78: wsjtx-prefix / src / wsjtx-stamp / wsjtx-build] Error 2gmake [2]: *** [CMakeFiles / Makefile2: 305: CMakeFiles / wsjtx-install.dir / all] Error 2gmake [1]: *** [CMakeFiles / Makefile2: 390: CMakeFiles / install.dir / rule] Error 2gmake: *** [Makefile: 267: install] Error 2 Is there anybody here that could provide me some suggestions? Thanks in advance! Regards, -- Marco Calistri Build: openSUSE Tumbleweed 20220719 Kernel: 5.18.11-1-default - XFCE: (4.16.0)

3 weeks, 4 days

4
5
0 0

AW: Postgis Installation

by Locher Stefan DFR IT AG

Hello I'm trying to get to work Postgis on our SLES 15.3 server with postgres 14 , but somehow I'm not able to find the correct packages My Server: SUSE Linux Enterprise Server 15 SP3 I added following Repo for Zypper: zypper addrepo https://download.opensuse.org/repositories/Application:/Geo/openSUSE_Leap_1… svudm00021:~ # zypper in postgresql14-postgis Loading repository data... Reading installed packages... Resolving package dependencies... Problem: nothing provides 'postgresql14-server = 14.4' needed by the to be installed postgresql14-postgis-3.2.1-lp153.17.2.x86_64 Solution 1: do not install postgresql14-postgis-3.2.1-lp153.17.2.x86_64 Solution 2: break postgresql14-postgis-3.2.1-lp153.17.2.x86_64 by ignoring some of its dependencies ==> On my second server I have executed the installation earlier on and was able to install it with the same repo i+ | postgresql14 | Basic Clients and Utilities for PostgreSQL | package i+ | postgresql14-contrib | Contributed Extensions and Additions to PostgreSQL | package i+ | postgresql14-llvmjit | Just-in-time compilation support for PostgreSQL | package i+ | postgresql14-postgis | Geographic Information Systems Extensions to PostgreSQL | package i+ | postgresql14-server | The Programs Needed to Create and Run a PostgreSQL Server | package i+ | postgresql14-server-devel | PostgreSQL server development header files and utilities | package the exact Version of postgres and Postgis on the second Server is 14.2 svudm00022:/etc/zypp # zypper se -v postgresql14-postgis Loading repository data... Warning: Repository 'Online updates for openSUSE Leap 15.3 (standard)' appears to be outdated. Consider using a different mirror or server. Reading installed packages... S | Name | Type | Version | Arch | Repository ---+----------------------------------+------------+------------------+--------+----------------------------------------------------------------------------------------------- i+ | postgresql14-postgis | package | 3.2.1-lp153.14.2 | x86_64 | Applications related to the earth (GIS, Mapping, geodesy, GPS, astronomy) (openSUSE_Leap_15.3 name: postgresql14-postgis can you suggest me what is the correct procedure to install postgis? How should I proceed? Regards Stefan _________________________________ KANTON AARGAU Departement Finanzen und Ressourcen Stefan Locher Fachspezialist Data Engineering & BI Informatik Aargau Technologie- & Lösungsentwicklung Hintere Bahnhofstrasse 8, 5000 Aarau Telefon +41 62 835 10 41 stefan.locher(a)ag.ch _________________________________ -----Ursprüngliche Nachricht----- Von: Axel Braun <axel.braun(a)gmx.de> Gesendet: Dienstag, 24. Mai 2022 20:23 An: buildservice(a)lists.opensuse.org Cc: Locher Stefan DFR IT AG <Stefan.Locher(a)ag.ch> Betreff: Re: Postgis Installation Hello Stefan, I feel this is more a question for support@ rather than buildservice@ Am Freitag, 13. Mai 2022, 09:05:37 CEST schrieb Locher Stefan DFR IT AG: > Hello Build Service > I want to install Postgis on SUSE SLE15 from > https://download.opensuse.org/repositories/Application:/Geo/openSUSE_Leap_15 > .2/Application:Geo.repo - Which SP of SLES 15? - Leap 15.2 is out of maintenance. Consider using a more up-to-date version > On the other Server we have Version 3.2.0 > > i+ | postgresql14-postgis | package | 3.2.0-lp152.1.1 | x86_64 | (System > Packages) name: postgresql14-postgis > > but now this Package seems not to exist anymore. > We only find 3.2.1 It was updated end of Feb (see changes file) > postgresql14-postgis | srcpackage | 3.2.1-lp152.14.2 | noarch | > Applications related to the earth (GIS, Mapping, geodesy, GPS, astronomy) > (openSUSE_Leap_15.2) name: postgresql14-postgis > > The installation breaks on > > Problem: nothing provides 'postgresql14-server = 14.2' needed by the to be > installed postgresql14-postgis-3.2.1-lp152.14.2.x86_64 Solution 1: do not > install postgresql14-postgis-3.2.1-lp152.14.2.x86_64 Solution 2: break > postgresql14-postgis-3.2.1-lp152.14.2.x86_64 by ignoring some of its > dependencies > > Which seems not yet available for SLES15 The build is currently broken for Leap 15.2 and 15.3 (x86_64) as OBS cant resolve a choice: have choice for libosg.so.161()(64bit) needed by libSFCGAL1: libOpenSceneGraph158 libOpenSceneGraph161, have choice for libosgDB.so.161() (64bit) needed by libSFCGAL1: libOpenSceneGraph158 libOpenSceneGraph161 (can be resolved by 'Prefer:' -> Maintainer) > How can we find the older Postgis rpm? Unless you branch it and revert to 3.2.0 probably nowhere. Why not upgrading to the latest version? Best, Axel

3 weeks, 4 days

2
1
0 0

2022

2021

2020

2019

2018

openSUSE Support July 2022