March 2019 - openSUSE Support - openSUSE Mailing Lists

[opensuse-support] user disappeared
by Adam Mizerski 16 Apr '19

16 Apr '19

Hi, I've got an odd problem, that probably deserves a bug report, but I don't know where to start looking for evidence. I'm running openSUSE 15.0 "transactional server" on a vps. I had freenet daemon installed, running as a dedicated "freenet" user. What happened is that the "freenet" user suddenly disappeared. It's not mentioned in /etc/passwd, /etc/shadow nor /etc/group. If I do "ls -l" in /home/freenet, there are numbers instead of owner and group. Service obviously fails to start. I had a look at logs, but there's nothing alarming. Do you have any clues, what could go wrong? Recent logs for freenet service: http://susepaste.org/view/a0905f56 Systemd service file: # /etc/systemd/system/freenet.service [Unit] Description=FreeNet Service After=local-fs.target network.target time-sync.target [Service] User=freenet Type=forking WorkingDirectory=/home/freenet/Freenet/ ExecStart=/home/freenet/Freenet/run.sh start ExecStop=/home/freenet/Freenet/run.sh stop PIDFile=/home/freenet/Freenet/Freenet.pid [Install] WantedBy=multi-user.target -- Adam Mizerski

5 10

[opensuse-support] Unresponsive desktop
by Carlos E. R. 08 Apr '19

08 Apr '19

Hi, Last December I reported this problem on my laptop, and now my desktop also exhibits it. After several days running, this morning it locked as soon as I changed workspaces. I noticed kswapd0 was busy long time, and that firefox had about 10 gigs of virtual memory. The disk activity led was solid blue. I couldn't find out more, the machine froze and had to be hard rebooted. A week before it also froze, but that time I could not observe anything. -- Cheers / Saludos, Carlos E. R. (from 15.0 x86_64 at Telcontar)

9 45

[opensuse-support] After upgrade to 15.0, restore from hibernation crashes the machine.
by Carlos E. R. 05 Apr '19

05 Apr '19

Black display, keyboard light responds initially, then not. ssh from another machine says there is no route to machine (works instantly after reboot). Means that network is dead on desktop. Log: <10.6> 2019-01-10 20:20:01 Telcontar cron 27759 - - pam_unix(crond:session): session opened for user cer by (uid=0) <10.6> 2019-01-10 20:20:02 Telcontar CRON 27759 - - pam_unix(crond:session): session closed for user cer <3.6> 2019-01-10 20:23:50 Telcontar systemd 1 - - Reached target Sleep. <3.6> 2019-01-10 20:23:50 Telcontar systemd 1 - - Starting Hibernate... <0.7> 2019-01-10 20:23:50 Telcontar kernel - - - [117583.419978] PM: Hibernation mode set to 'platform' <3.6> 2019-01-10 20:23:50 Telcontar systemd-sleep 27981 - - INFO: running /usr/lib/systemd/system-sleep/grub2.sleep for hibernate <3.6> 2019-01-10 20:23:50 Telcontar systemd-sleep 27981 - - INFO: Running prepare-grub .. <3.6> 2019-01-10 20:23:50 Telcontar systemd-sleep 27981 - - 2019-01-10 20:23:50+01:00 - Hibernating the system now... <3.4> 2019-01-10 20:23:50 Telcontar systemd-sh - - - Hibernating the system now... <3.6> 2019-01-10 20:23:50 Telcontar systemd-sleep 27981 - - service: no such service upsd.service <3.6> 2019-01-10 20:23:51 Telcontar systemd-sleep 27981 - - running kernel is grub menu entry openSUSE Leap 15.0 (vmlinuz-4.12.14-lp150.12.28-default) <3.6> 2019-01-10 20:23:51 Telcontar systemd-sleep 27981 - - preparing boot-loader: selecting entry openSUSE Leap 15.0, kernel /boot/4.12.14-lp150.12.28-default <3.6> 2019-01-10 20:23:56 Telcontar systemd-sleep 27981 - - running /usr/sbin/grub2-once "openSUSE Leap 15.0" <3.6> 2019-01-10 20:23:56 Telcontar systemd-sleep 27981 - - time needed for sync: 5.2 seconds, time needed for grub: 0.2 seconds. <3.6> 2019-01-10 20:23:56 Telcontar systemd-sleep 27981 - - INFO: Done. <3.6> 2019-01-10 20:23:56 Telcontar systemd-sleep 27981 - - Suspending system... <0.6> 2019-01-10 20:23:57 Telcontar kernel - - - [117590.115929] PM: Syncing filesystems ... 2019-01-11 11:07:16+01:00 - Booting the system now ================================================================================ Linux Telcontar 4.12.14-lp150.12.28-default #1 SMP Mon Dec 3 16:46:15 UTC 2018 (b91289f) x86_64 x86_64 x86_64 GNU/Linux <3.6> 2019-01-11 11:07:18 Telcontar systemd 1 - - systemd 234 running in system mode. (+PAM -AUDIT +SELINUX -IMA +APPARMOR -SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT -GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD -IDN2 -IDN default-hierarchy=hybrid) Hibernation has worked in this machine reliably for about a decade - till 15.0 :-( -- Cheers / Saludos, Carlos E. R. (from 15.0 x86_64 at Telcontar)

4 14

[opensuse-support] Docking station - extending ports of HP notebooks
by Vojtěch Zeisek 04 Apr '19

04 Apr '19

Hi, I need to extend ports available on HP ProBook 650 G2 and HP X2 210 G2 (both running TW) by something like HP USB-C Travel HUB, HP USB-C Mini Dock #AC3,HP Spectre USB-C, HP USB-C mini dock or HP USB-C Universal Dock + 4.5mm and USB Dock Adapter. They are connected to the notebook via USB-C and extend ports available in the notebook. Do You have experiences with that? Is it well supported? Does it reliably work with anything You connect via the dock? I need charging of the notebook (the X2), more USB, Ethernet. I suppose ports in notebook (HDMI, USB, ...) are still working as expected. Do You use something like that? Thanks in advance, V. -- Vojtěch Zeisek Komunita openSUSE GNU/Linuxu Community of the openSUSE GNU/Linux https://www.opensuse.org/ https://trapa.cz/

2 3

[opensuse-support] 15.0 most boots halt in emergency mode
by Felix Miata 01 Apr '19

01 Apr '19

# inxi -b System: Host: i2134 Kernel: 4.12.14-lp150.12.48-default x86_64 bits: 64 Desktop: Trinity R14.0.6 Distro: openSUSE Leap 15.0 Machine: Type: Desktop System: Apple product: iMac7,1 v: 1.0 serial: QP7440XDX89 Mobo: Apple model: Mac-F42386C8 v: PVT serial: 1 UEFI: Apple v: IM71.88Z.007A.B03.0803051705 date: 03/05/08 CPU: Dual Core: Intel Core2 Duo T7700 type: MCP speed: 1794 MHz min/max: 800/2400 MHz Graphics: Device-1: Advanced Micro Devices [AMD/ATI] RV630/M76 [Mobility Radeon HD 2600 XT/2700] driver: radeon v: kernel Display: server: X.Org 1.19.6 driver: modesetting unloaded: fbdev,vesa resolution: 1920x1200~60Hz OpenGL: renderer: AMD RV630 (DRM 2.50.0 / 4.12.14-lp150.12.48-default LLVM 5.0.1) v: 3.3 Mesa 18.0.2 Network: Device-1: Broadcom Limited BCM4321 802.11a/b/g/n driver: b43-pci-bridge Device-2: Marvell 88E8058 PCI-E Gigabit Ethernet driver: sky2 Drives: Local Storage: total: 931.51 GiB used: 26.31 GiB (2.8%) Info: Processes: 156 Uptime: N/A Memory: 3.84 GiB used: 486.4 MiB (12.4%) Shell: bash inxi: 3.0.32 # journal -b | grep ailed: http://fm.no-ip.com/Tmp/SUSE/Leap/imac150-jrnl-failed-201903292030.txt full journal: http://fm.no-ip.com/Tmp/SUSE/Leap/imac150-jrnl-201903292030.txt # cat /etc/fstab: LABEL=EFI /boot/efi vfat codepage=437 0 0 LABEL=st10swapper swap swap defaults 0 0 LABEL=st10suseleap / ext4 noatime 1 1 LABEL=st10linuxnext /disks/s151 ext4 noatime 1 2 LABEL=st10susehome /home ext4 noatime 1 2 /dev/disk/by-id/ata-ST1000DM003-1SB10C_Z9A1LQPM-part2 /macsys hfsplus ro,nofail 0 0 /dev/disk/by-id/ata-ST1000DM003-1SB10C_Z9A1LQPM-part4 /home/macdata hfsplus force,uid=501,gid=100,umask=002,noatime,nofail 0 0 I don't see any clues to why this happens on most boots. Immediate Ctrl-D always triggers successful init completion. Can anyone see what I am missing to cause this? -- Evolution as taught in public schools is religion, not science. Team OS/2 ** Reg. Linux User #211409 ** a11y rocks! Felix Miata *** http://fm.no-ip.com/ -- To unsubscribe, e-mail: opensuse-support+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-support+owner(a)opensuse.org

5 19

[opensuse-support] How can I get nvidia.ko installed in 15.0?
by Carlos E. R. 01 Apr '19

01 Apr '19

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 startx complains it could not modprobe nvidia.ko. The module does not exist. Telcontar:~ # rpm -ql nvidia-gfxG03-kmp-default | less /etc/modprobe.d/nvidia-default.conf /lib/modules/4.12.14-lp150.11-default /lib/modules/4.12.14-lp150.11-default/updates /lib/modules/4.12.14-lp150.11-default/updates/nvidia.ko <-- /usr/lib/nvidia ... But it is not there. Why? Telcontar:~ # l /lib/modules/4.12.14-lp150.11-default/updates total 8 drwxr-xr-x 2 root root 4096 Oct 12 15:55 ./ drwxr-xr-x 3 root root 4096 Mar 29 12:42 ../ Telcontar:~ # I look into the rpm with mc, and the file is not there. How can I then create it? How can I find why it was not created? There is nothing in the log. [...] I install the rpm manually. I get this: Telcontar:/data/storage_c/repositorios_zypp/15_0/download.nvidia.com-leap/x86_64 # rpm --install --force nvidia-gfxG03-kmp-default-340.107_k4.12.14_lp150.11-lp150.12.1.x86_64.rpm make: *** /usr/src/linux-obj/x86_64/default: No such file or directory. Stop. make: *** /usr/src/linux-obj/x86_64/default: No such file or directory. Stop. /usr/src/kernel-modules/nvidia-340.107-default / NVIDIA: calling KBUILD... make[1]: *** /lib/modules//source: No such file or directory. Stop. NVIDIA: left KBUILD. nvidia.ko failed to build! make: *** [Makefile:192: nvidia.ko] Error 1 / install: cannot stat '/usr/src/kernel-modules/nvidia-340.107-default/nvidia.ko': No such file or directory depmod: WARNING: could not open modules.order at /lib/modules/4.12.14-lp150.11-default: No such file or directory depmod: WARNING: could not open modules.builtin at /lib/modules/4.12.14-lp150.11-default: No such file or directory Modprobe blacklist files have been created at /etc/modprobe.d to prevent Nouveau from loading. This can be reverted by deleting /etc/modprobe.d/nvidia-*.conf. .... then it goes on with dracut. As you can see, the make procedure failed, yet YaST said nothing and continues with dracut, making one think that everything was alright. The local problem is here: Telcontar:/data/storage_c/repositorios_zypp/15_0 # Telcontar:/usr/src/linux-obj/x86_64 # l default lrwxrwxrwx 1 root root 47 Mar 28 19:39 default -> ../../linux-4.12.14-lp151.22-obj/x86_64/default Telcontar:/usr/src/linux-obj/x86_64 # Installation of the 15.0 kernel after removing 15.1 kernel did not make the correct link. - -- Cheers Carlos E. R. (from 42.2 x86_64 "Malachite" at Telcontar) -----BEGIN PGP SIGNATURE----- iHoEARECADoWIQQZEb51mJKK1KpcU/W1MxgcbY1H1QUCXJ5PxRwccm9iaW4ubGlz dGFzQHRlbGVmb25pY2EubmV0AAoJELUzGBxtjUfVIWAAniZ5TAdnHmB2wtHPA1Fi HK5WI1jkAJsEpVixYpqELfpEW8T51x5cepyEnQ== =3IXb -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse-support+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-support+owner(a)opensuse.org

2 2

[opensuse-support] X server dies after resuming from hibernation
by mh＠mike.franken.de 31 Mar '19

31 Mar '19

Hi *, sometimes, but not always my X server dies after the system has successfully resumed from hibernation. It is restarted then, so I can login, but of course my previous session is lost. Xorg.log.old contains: ------------------------< snip snip snip >----------------------------- ... [ 65043.707] (II) AIGLX: Suspending AIGLX clients for VT switch [ 65050.192] (II) AIGLX: Resuming AIGLX clients after VT switch [ 65050.212] (EE) modeset(0): failed to set mode: Invalid argument [ 65050.212] (EE) Fatal server error: [ 65050.212] (EE) EnterVT failed for screen 0 [ 65050.212] (EE) [ 65050.212] (EE) Please consult the The X.Org Foundation support at http://wiki.x.org for help. [ 65050.212] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information. [ 65050.212] (EE) [ 65050.216] (II) AIGLX: Suspending AIGLX clients for VT switch [ 65050.266] (EE) Server terminated with error (1). Closing log file. ------------------------< snip snip snip >----------------------------- journal says: ------------------------< snip snip snip >----------------------------- org.a11y.Bus[2632]: XIO: fatal IO error 11 (Resource temporarily unavailable) on X server ":0" org.a11y.Bus[2632]: after 23769 requests (23769 known processed) with 0 events remaining. ------------------------< snip snip snip >----------------------------- - openSUSE Tumbleweed with latest snapshot - Linux thunder 5.0.3-1-default #1 SMP Fri Mar 22 17:30:35 UTC 2019 (2a31831) x86_64 x86_64 x86_64 GNU/Linux - notebook Dell Inc. XPS 13 9370/0F6P3V, BIOS 1.8.1 02/14/2019 - Thunderbolt docking station CalDigit TS3 Plus - my monitor is connected to the display port connector of this docking station Any idea, what might be causing this? TIA. Bye. Michael. -- Michael Hirmke -- To unsubscribe, e-mail: opensuse-support+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-support+owner(a)opensuse.org

1 0

[opensuse-support] 42.3 Newmoon 28.3.1 from network repo useless
by Felix Miata 30 Mar '19

30 Mar '19

Does it work for anyone? I installed the rpm with zypper, but clicking anywhere in the UI causes a segfault: ###!!! ABORT: X_CreatePixmap: BadAlloc (insufficient resources for operation); 4 requests ago: file /home/abuild/rpmbuild/BUILD/UXP-PM28.3.1_Release/toolkit/xre/nsX11ErrorHandler.cpp, line 135 Segmentation fault (core dumped) Do all or any of the instructions on http://linux.palemoon.org/help/installation/ apply when installing the rpm? -- Evolution as taught in public schools is religion, not science. Team OS/2 ** Reg. Linux User #211409 ** a11y rocks! Felix Miata *** http://fm.no-ip.com/ -- To unsubscribe, e-mail: opensuse-support+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-support+owner(a)opensuse.org

1 0

[opensuse-support] Trying to use the 15.1 kernel on 15.0
by Carlos E. R. 28 Mar '19

28 Mar '19

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Content-ID: <alpine.LSU.2.21.1903282012470.4036(a)Telcontar.valinor> Hi, As mentioned previously, I have a problem with hibernation, and I need to try if a more advanced kernel solves the problem. So I have installed the 15.1 kernel on 15.0 (instead of trying the TW kernel), and the 15.1 NVidia driver. So this is what I installed: x11-video-nvidiaG03-340.107-lp151.12.2.x86_64 2019-03-28T19:42:17 CET nvidia-computeG03-340.107-lp151.12.2.x86_64 2019-03-28T19:42:13 CET nvidia-glG03-340.107-lp151.12.2.x86_64 2019-03-28T19:42:09 CET nvidia-uvm-gfxG03-kmp-default-340.107_k4.12.14_lp151.22-lp151.12.25.x86_64 2019-03-28T19:41:00 CET nvidia-gfxG03-kmp-default-340.107_k4.12.14_lp151.22-lp151.12.26.x86_64 2019-03-28T19:39:49 CET kernel-syms-4.12.14-lp151.22.9.x86_64 2019-03-28T19:39:47 CET kernel-default-devel-4.12.14-lp151.22.9.x86_64 2019-03-28T19:39:46 CET kernel-default-4.12.14-lp151.22.9.x86_64 2019-03-28T19:39:12 CET cer@Telcontar:~> uname -a Linux Telcontar 4.12.14-lp151.22-default #1 SMP Thu Feb 28 15:45:32 UTC 2019 (25279f0) x86_64 x86_64 x86_64 GNU/Linux cer@Telcontar:~> Graphic crashes - as I half feared: cer@Telcontar:~> startx xauth: file /home/cer/.serverauth.3927 does not exist X.Org X Server 1.19.6 Release Date: 2017-12-20 X Protocol Version 11, Revision 0 Build Operating System: openSUSE SUSE LINUX Current Operating System: Linux Telcontar 4.12.14-lp151.22-default #1 SMP Thu Feb 28 15:45:32 UTC 2019 (25279f0) x86_64 Kernel command line: BOOT_IMAGE=/vmlinuz-4.12.14-lp151.22-default root=UUID=ac173013-18ad-4c4e-921e-fd2ecfb56495 resume=/dev/disk/by-label/ssd-swap splash=verbose Build Date: 14 March 2019 12:00:00PM Current version of pixman: 0.34.0 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/home/cer/.local/share/xorg/Xorg.0.log", Time: Thu Mar 28 19:57:18 2019 (==) Using config file: "/etc/X11/xorg.conf" (==) Using config directory: "/etc/X11/xorg.conf.d" (==) Using system config directory "/usr/share/X11/xorg.conf.d" xf86EnableIOPorts: failed to set IOPL for I/O (Operation not permitted) (EE) Fatal server error: (EE) no screens found(EE) (EE) Please consult the The X.Org Foundation support at http://wiki.x.org for help. (EE) Please also check the log file at "/home/cer/.local/share/xorg/Xorg.0.log" for additional information. (EE) GA Arbitration: Cannot restore default device.(EE) Server terminated with error (1). Closing log file. V ^Cxinit: giving up xinit: unable to connect to X server: Connection refused xinit: unexpected signal 2 - ------------------------------------------------------------------------------------------- xinit failed. /usr/bin/Xorg is not setuid, maybe that's the reason? If so either use a display manager (strongly recommended) or adjust /etc/permissions.local and run "chkstat --system --set" afterwards cer@Telcontar:~> (I had to press ctrl-c to stop to get back the prompt) The "/home/cer/.local/share/xorg/Xorg.0.log" is attached. I don't see why it crashes, except that it says "Failed to initialize the NVIDIA kernel module.", but not why. It says to see syslog. The relevant portion is this: <10.6> 2019-03-28 19:56:54 Telcontar login - - - LOGIN ON tty2 BY cer <3.6> 2019-03-28 19:56:55 Telcontar systemd 1 - - Started Clamav antivirus Deamon. <3.6> 2019-03-28 19:56:55 Telcontar systemd 1 - - Starting Amavisd-new Virus Scanner interface... <3.6> 2019-03-28 19:56:56 Telcontar systemd 1 - - Started Amavisd-new Virus Scanner interface. <3.6> 2019-03-28 19:56:56 Telcontar systemd 1 - - Starting Postfix Mail Transport Agent... <3.6> 2019-03-28 19:56:56 Telcontar echo 3820 - - Starting mail service (Postfix) <3.6> 2019-03-28 19:56:58 Telcontar systemd 1 - - Started Postfix Mail Transport Agent. <3.6> 2019-03-28 19:56:58 Telcontar systemd 1 - - Started Command Scheduler. <3.6> 2019-03-28 19:56:58 Telcontar systemd 1 - - Reached target Multi-User System. <3.6> 2019-03-28 19:56:58 Telcontar systemd 1 - - Starting Plays a welcome sound when target multi-user is reached... <9.6> 2019-03-28 19:56:58 Telcontar cron 3917 - - (CRON) INFO (RANDOM_DELAY will be scaled with factor 31% if used.) <3.6> 2019-03-28 19:56:58 Telcontar systemd 1 - - Starting Update UTMP about System Runlevel Changes... <9.6> 2019-03-28 19:56:58 Telcontar cron 3917 - - (CRON) INFO (running with inotify support) <3.6> 2019-03-28 19:56:58 Telcontar systemd 1 - - Started Update UTMP about System Runlevel Changes. <3.6> 2019-03-28 19:56:58 Telcontar Mine - - - Saying hello world. <3.6> 2019-03-28 19:56:58 Telcontar systemd 1 - - Started Plays a welcome sound when target multi-user is reached. <3.6> 2019-03-28 19:57:45 Telcontar systemd 1 - - Starting Console Mouse manager... <1.6> 2019-03-28 19:57:45 Telcontar 3982 - - *** info [daemon/startup.c(136)]: <1.6> 2019-03-28 19:57:45 Telcontar 3982 - - Started gpm successfully. Entered daemon mode. <3.6> 2019-03-28 19:57:45 Telcontar systemd 1 - - Started Console Mouse manager. <4.6> 2019-03-28 19:58:14 Telcontar systemd-logind 1537 - - New session 3 of user cer. I started gpm in order to paste the error log in text mode, so I know the instant startx failed. - -- Cheers Carlos E. R. (from 15.0 x86_64 at Telcontar) -----BEGIN PGP SIGNATURE----- iHoEARECADoWIQQZEb51mJKK1KpcU/W1MxgcbY1H1QUCXJ0eTxwccm9iaW4ubGlz dGFzQHRlbGVmb25pY2EubmV0AAoJELUzGBxtjUfVYwEAn0V1QbWK2sEl6AOWq5fi ES2DYnRAAJwJIeDJQ5i2JjHvQhdqPPt0gaLIQA== =Wm5R -----END PGP SIGNATURE-----

1 0

[opensuse-support] Tumbleweed kernel 5.x: kdump can't be loaded
by mh＠mike.franken.de 27 Mar '19

27 Mar '19

Hi *, starting with kernel 5.x on my Tumbleweed machines kdump can't be loaded any longer with "kexec_load failed: Permission denied". Excerpt from my journal: ------------------------< snip snip snip >----------------------------- load.sh[1742]: kexec_file_load failed: Permission denied kernel: ima: impossible to appraise a kernel image without a file descriptor; try using kexec_file_load syscall. load.sh[1742]: kexec_load failed: Permission denied load.sh[1742]: entry = 0x4ade9c730 flags = 0x3e0001 load.sh[1742]: nr_segments = 8 load.sh[1742]: segment[0].buf = 0x1e207e0 load.sh[1742]: segment[0].bufsz = 0x70 load.sh[1742]: segment[0].mem = 0x4a2000000 load.sh[1742]: segment[0].memsz = 0x1000 load.sh[1742]: segment[1].buf = 0x1e28820 load.sh[1742]: segment[1].bufsz = 0x168 load.sh[1742]: segment[1].mem = 0x4a2001000 load.sh[1742]: segment[1].memsz = 0x1000 load.sh[1742]: segment[2].buf = 0x7f22cc853010 load.sh[1742]: segment[2].bufsz = 0x1252c74 load.sh[1742]: segment[2].mem = 0x4aadad000 load.sh[1742]: segment[2].memsz = 0x1253000 load.sh[1742]: segment[3].buf = 0x7f22cdaaa410 load.sh[1742]: segment[3].bufsz = 0x7cdae0 load.sh[1742]: segment[3].mem = 0x4ac000000 load.sh[1742]: segment[3].memsz = 0x1e4d000 load.sh[1742]: segment[4].buf = 0x1e1a420 load.sh[1742]: segment[4].bufsz = 0x457c load.sh[1742]: segment[4].mem = 0x4ade97000 load.sh[1742]: segment[4].memsz = 0x5000 load.sh[1742]: segment[5].buf = 0x1e13070 load.sh[1742]: segment[5].bufsz = 0x70e0 load.sh[1742]: segment[5].mem = 0x4ade9c000 load.sh[1742]: segment[5].memsz = 0x9000 load.sh[1742]: segment[6].buf = 0x1e11f80 load.sh[1742]: segment[6].bufsz = 0xc00 load.sh[1742]: segment[6].mem = 0x4adea5000 load.sh[1742]: segment[6].memsz = 0x4000 load.sh[1742]: segment[7].buf = 0x7f22cc7fb010 load.sh[1742]: segment[7].bufsz = 0x57000 load.sh[1742]: segment[7].mem = 0x4adea9000 load.sh[1742]: segment[7].memsz = 0x57000 kdump[24916]: FAILED to load kdump kernel: /sbin/kexec -p /boot/vmlinuz-5.0.2-1-default --append="quiet no_console_suspend consoleblank=0 systemd.log_target=kmsg log_buf_len=1M printk.devkmsg=on elevator=deadline sysrq=yes reset_devices acpi_no_memhotplug cgroup_disable=memory nokaslr numa=off irqpoll nr_cpus=1 root=kdump rootflags=bind rd.udev.children-max=8 disable_cpu_apicid=0 panic=1" --initrd=/boot/initrd-5.0.2-1-default-kdump , Result: kexec_load failed: Permission denied entry = 0x4ade9c730 flags = 0x3e0001 nr_segments = 8 segment[0].buf = 0x1e207e0 segment[0].bufsz = 0x70 segment[0].mem = 0x4a2000000 segment[0].memsz = 0x1000 segment[1].buf = 0x1e28820 segment[1].bufsz = 0x168 segment[1].mem = 0x4a2001000 segment[1].memsz = 0x1000 segment[2].buf = 0x7f22cc853010 segment[2].bufsz = 0x1252c74 segment[2].mem = 0x4aadad000 segment[2].memsz = 0x1253000 segment[3].buf = 0x7f22cdaaa410 segment[3].bufsz = 0x7cdae0 segment[3].mem = 0x4ac000000 segment[3].memsz = 0x1e4d000 segment[4].buf = 0x1e1a420 systemd[1]: kdump.service: Main process exited, code=exited, status=255/EXCEPTION systemd[1]: kdump.service: Failed with result 'exit-code'. systemd[1]: Failed to start Load kdump kernel and initrd. ------------------------< snip snip snip >----------------------------- Any idea what to do to get kdump back? TIA. Bye. Michael. -- Michael Hirmke -- To unsubscribe, e-mail: opensuse-support+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-support+owner(a)opensuse.org

2 7