June 2021 - openSUSE Support - openSUSE Mailing Lists

by Douglas McGarrett

ConvertAll is a very handy unit converter which will turn mm to inches, light years to miles. and just about anything in between. Zypper can't find it. I have downloaded a .tar.gz file. I have unzipped the tar.gz. file, but zypper can't seem to deal with that either. What must I do to install it? --doug

8 hours, 6 minutes

9
18
0 0

Verifying new Tumbleweed repository package signing keys

by Hector Sanjuan

Hello, yesterday zypper complained about new package signing keys for: [http://download.opensuse.org/repositories/openSUSE:/Tumbleweed/standard/](h… However, I could not find a place to verify that the key shown to me (and which I guess should have corresponded to one of gpg-pubkey-3dbdc284-53674dd4.asc gpg-pubkey-39db7c82-5f68629b.asc gpg-pubkey-307e3d54-5aaa90a5.asc found in the repository) was legit. Are there announcements about key rotations? Is there a secondary source where the signing keys are published other than the repo itself which is asking me about accepting its own new keys? What do "307e3d54" and "5aaa90a5" in gpg-pubkey-307e3d54-5aaa90a5.asc mean, as it does not seem to be related to the key fingerprint ? The fact that half of my repos were added with HTTP by default (1-click-installs etc) and that I could not readily verify if new keys are legit defeats a lot of the purpose of having signed packages. Regards, -- Hector

11 hours, 44 minutes

2
4
0 0

zypper repos erro

by Marco Calistri

Since some days I get errors like this (sorry to be in my language but I'm sure you understand the issue). When it happens I delete the specific repository or disable then execute the zypper ref again. - Errore di download (curl) per 'https://download.opensuse.org/repositories/Education/openSUSE_Tumbleweed/re…': Codice di errore: Curl error 16 Messaggio di errore: - Can't provide /repodata/repomd.xml Is it a known problem at opensuse? Thanks for your attention. Regards, P.S. list opensuse-support(a)opensuse.org is still active? P.S. 2 this the third message with same context I'm trying to post on the mailing list without success, are there some not compliances with it? -- Marco Calistri Build: openSUSE Tumbleweed 20210611 Kernel:5.12.9-1-default Desktop: XFCE (4.16.0)

17 hours, 14 minutes

3
3
0 0

Frequent zypper repos erro

by Marco Calistri

Since some days I get errors like this (sorry to be in my language but I'm sure you understand the issue). When it happens I delete the specific repository or disable then execute the zypper ref again. - Errore di download (curl) per 'https://download.opensuse.org/repositories/Education/openSUSE_Tumbleweed/re…': Codice di errore: Curl error 16 Messaggio di errore: - Can't provide /repodata/repomd.xml Is it a known problem at opensuse? Thanks for your attention. Regards, P.S. list opensuse-support(a)opensuse.org is still active? -- Marco Calistri Build: openSUSE Tumbleweed 20210611 Kernel:5.12.9-1-default Desktop: XFCE (4.16.0)

17 hours, 32 minutes

1
1
0 0

how many files should /var/adm/backup/rpmdb have in it?

by Felix Miata

Right now I have 5 files of more than 60000K each. Maybe the better question would be: when do older copies of Packages*.gz serve no purpose? Is there any point to keeping copies that are more than a year old? 6 months? 3 months? More than 1-2 copies regardless of age? Is there something that deletes the oldest after a certain age or number of copies? -- Evolution as taught in public schools is, like religion, based on faith, not based on science. Team OS/2 ** Reg. Linux User #211409 ** a11y rocks! Felix Miata

19 hours, 40 minutes

3
5
0 0

Frequent zypper repos erro

by Marco Calistri

Since some days I get errors like this (sorry to be in my language but I'm sure you understand the issue). When it happens I delete the specific repository or disable then execute the zypper ref again. - Errore di download (curl) per 'https://download.opensuse.org/repositories/Education/openSUSE_Tumbleweed/re…': Codice di errore: Curl error 16 Messaggio di errore: - Can't provide /repodata/repomd.xml Is it a known problem at opensuse? Thanks for your attention. Regards, -- Marco Calistri Build: openSUSE Tumbleweed 20210606 Kernel:5.12.9-1-default Desktop: XFCE (4.16.0)

2 days, 12 hours

2
1
0 0

Frequent zypper repos erro

by Marco Calistri

Since some days I get errors like this (sorry to be in my language but I'm sure you understand the issue). When it happens I delete the specific repository or disable then execute the zypper ref again. - Errore di download (curl) per 'https://download.opensuse.org/repositories/Education/openSUSE_Tumbleweed/re…': Codice di errore: Curl error 16 Messaggio di errore: - Can't provide /repodata/repomd.xml Is it a known problem at opensuse? Thanks for your attention. Regards, -- Marco Calistri Build: openSUSE Tumbleweed 20210606 Kernel:5.12.9-1-default Desktop: XFCE (4.16.0)

2 days, 13 hours

2
1
0 0

Re: Both XFCE and Upower unable to execute the "Hybrid-Sleep"

by Marco Calistri

Il 11/06/21 16:12, TomasK ha scritto: > I have had similar sounding issues - my "slightly" annoying, but > always working solution: > > sudo systemctl suspend > > Hope that helps, Tomas > > On Fri, 2021-06-11 at 15:15 -0300, Marco Calistri wrote: >> Hello, >> >> From some quite time I'm trying to enable the hybrid-sleep feature >> whenever battery level hit the critical threshold. >> >> Despite the fact that by running the command from the console it >> works perfectly, it doesn't using Upower or Xfce-power-manager. >> >> In the better cases I just obtain the Hibernate of the system. >> >> Is there anybody having a solution for this? >> >> I would like to both suspend and saving on disk my windows and tasks >> opened if the battery drops to critical charge. >> >> Thanks for your attention. >> >> Regards, Yes it works but I would like it were automatic from daemon management, you know? Without human action. Regards, -- Marco Calistri Build: openSUSE Tumbleweed 20210606 Kernel:5.12.9-1-default Desktop: XFCE (4.16.0)

2 days, 14 hours

1
0
0 0

Both XFCE and Upower unable to execute the "Hybrid-Sleep"

by Marco Calistri

Hello, From some quite time I'm trying to enable the hybrid-sleep feature whenever battery level hit the critical threshold. Despite the fact that by running the command from the console it works perfectly, it doesn't using Upower or Xfce-power-manager. In the better cases I just obtain the Hibernate of the system. Is there anybody having a solution for this? I would like to both suspend and saving on disk my windows and tasks opened if the battery drops to critical charge. Thanks for your attention. Regards, -- Marco Calistri Build: openSUSE Tumbleweed 20210606 Kernel:5.12.9-1-default Desktop: XFCE (4.16.0)

5 days, 11 hours

1
0
0 0

cups HP printer not working - Busy - "Waiting for the printer to become available."

by michael.kasimir＠gmx.de

Hi all, Busy - "Waiting for the printer to become available." I cannot get HP printer 2100 Series to run. For beginning analysis I tried the obvious: $ lsusb Bus 003 Device 002: ID 8087:8000 Intel Corp. Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 002: ID 0424:5534 Standard Microsystems Corp. Hub Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 006: ID 04f2:b3ca Chicony Electronics Co., Ltd Bus 001 Device 005: ID 03f0:581d Hewlett-Packard lt4112 Gobi 4G Module Network Device Bus 001 Device 009: ID 046d:c077 Logitech, Inc. M105 Optical Mouse Bus 001 Device 004: ID 8087:07dc Intel Corp. Bus 001 Device 002: ID 0424:2134 Standard Microsystems Corp. Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub $ $ sudo cat /etc/cups/printers.conf | egrep -i 'model|device' [sudo] password for root: MakeModel HP LaserJet 2100 - CUPS+Gutenprint v5.2.14 DeviceURI usb://HP/LaserJet%202100%20Series MakeModel HP LaserJet P3005 - CUPS+Gutenprint v5.2.14 DeviceURI hp:/usb/HP_LaserJet_P3005?serial=CNF1T65817 MakeModel HP LaserJet 2100 - CUPS+Gutenprint v5.2.14 DeviceURI usb://HP/LaserJet%202100%20Series $ $ lpstat -t -v -r -H scheduler is running system default destination: HP-LaserJet-2100-Series device for HP-LaserJet-2100-Series: usb://HP/LaserJet%202100%20Series device for HP-LaserJet-P3005: hp:/usb/HP_LaserJet_P3005?serial=CNF1T65817 device for hplaserjet2100series: usb://HP/LaserJet%202100%20Series HP-LaserJet-2100-Series accepting requests since Thu 10 Jun 2021 12:50:25 CEST HP-LaserJet-P3005 accepting requests since Thu 10 Dec 2020 16:12:28 CET hplaserjet2100series accepting requests since Fri 04 Jun 2021 17:30:42 CEST printer HP-LaserJet-2100-Series now printing HP-LaserJet-2100-Series-155. enabled since Thu 10 Jun 2021 12:50:25 CEST Waiting for the printer to become available. printer HP-LaserJet-P3005 disabled since Thu 10 Dec 2020 16:12:28 CET - Unplugged or turned off printer hplaserjet2100series disabled since Fri 04 Jun 2021 17:30:42 CEST - Unplugged or turned off HP-LaserJet-2100-Series-155 mick 29696 Thu 10 Jun 2021 12:50:25 CEST device for HP-LaserJet-2100-Series: usb://HP/LaserJet%202100%20Series device for HP-LaserJet-P3005: hp:/usb/HP_LaserJet_P3005?serial=CNF1T65817 device for hplaserjet2100series: usb://HP/LaserJet%202100%20Series scheduler is running /run/cups/cups.sock $ $ lpq HP-LaserJet-2100-Series is ready and printing Rank Owner Job File(s) Total Size active mick 155 Anschreiben_A.docx 29696 bytes $ What I found interesting is: scheduler is running I didn't start a scheduler and had no idea to kill the scheduler. I see here, the document ''Anschreiben_A.docx'' is in queue. Hope someone can help... Kind regards Michael Be Free, Be Linux

6 days, 16 hours

4
4
0 0

2021

2020

2019

2018

openSUSE Support June 2021