June 2021 - openSUSE Support - openSUSE Mailing Lists

Chronyc not resyncs after the system resumes
by Marco Calistri 20 Jun '21

20 Jun '21

Hello, I face a little boring issue with my chronyc: Whenever I resume my system after it went in stand-by, it misses the synchronization with the NTP sources: chronyc sources MS Name/IP address Stratum Poll Reach LastRx Last sample =============================================================================== ^? 162.159.200.123 0 6 0 - +0ns[ +0ns] +/- 0ns ^? ntp27.kashra-server.com 0 6 0 - +0ns[ +0ns] +/- 0ns ^? ec2-52-67-171-238.sa-eas> 0 6 0 - +0ns[ +0ns] +/- 0ns ^? a.ntp.br 0 6 0 - +0ns[ +0ns] +/- 0ns ^? c.ntp.br 0 6 0 - +0ns[ +0ns] +/- 0ns ^? Time100.Stupi.SE 0 6 0 - +0ns[ +0ns] +/- 0ns then I need to force it to sync again: sudo chronyc burst 4/4; sudo chronyc makestep [sudo] password di root: 200 OK 200 OK chronyc sources MS Name/IP address Stratum Poll Reach LastRx Last sample =============================================================================== ^? 162.159.200.1 0 6 0 - +0ns[ +0ns] +/- 0ns ^- ntp27.kashra-server.com 2 6 0 203 +8663us[+8663us] +/- 158ms ^- ec2-52-67-171-238.sa-eas> 3 6 0 204 +8338us[+8338us] +/- 248ms ^* a.ntp.br 2 6 0 205 +267us[-3618us] +/- 9661us ^- c.ntp.br 2 6 0 204 -4523us[-4523us] +/- 31ms ^- Time100.Stupi.SE Are there any additional parameters I need to set into the chronyc configuration file in order to avoid to force syncing manually? Thanks and regards, -- Marco Calistri Build: openSUSE Tumbleweed 20210618 Kernel:5.12.10-1-default Desktop: XFCE (4.16.0)

1 0

dracut build fails installing pci_stub [Solved?]
by J Leslie Turriff 19 Jun '21

19 Jun '21

I recently added an nVidia geForce 2060 RTX card for . Afterwards, I decided to dedicate it to a Windows virtual machine, so I wanted to disable the nVidia drivers and switch to the vfio-pci driver, as described in "VGA PCI Passthrough guide on openSuSE Leap 42-2" (https://forums.opensuse.org/showthread.php/522015-VGA-PCI-Passthrough-guide…). Now when I try to rebuild my boot-loader with | dracut --force /boot/initrd 5.3.18-lp152.75-default the build fails with | dracut-install: ERROR: installing 'pci_stub' | dracut: FAILED: /usr/lib/dracut/dracut-install -D /var/tmp/dracut.2XbEWb/initramfs -N i2o_scsi| nvidia|nvidia_drm|nvidia-modeset| nvidia-uvm --kerneldir /lib/modules/5.3.18-lp152.75-default/ -m pci_stub vfio vfio_iommu_type1 vfio_pci vfio_virqfd kvm vm_intel and I'm not sure what to do to recover from this. And I forgot to add this link to the log output: https://paste.opensuse.org/3218884 And then I found this, which might be the solution, though it says it's for Tumbleweed: https://www.reddit.com/r/VFIO/comments/cigpb5/dracut_broke_my_passthrough/ Leslie -- openSUSE Leap 15.2 x86_64

2 1

korganizer and google calendar
by Ronald Edmister 19 Jun '21

19 Jun '21

I have been attempting to link my kontact software with a google calendar acct. and i make it through the user name but then instead of coming back for a password entry it gives me an error of 'couldn't sign you in - this browser or app may not be secure' This is on a dell laptop with a fresh install of opensuse 15.3

1 0

dracut build fails installing pci_stub
by J Leslie Turriff 19 Jun '21

19 Jun '21

I recently added an nVidia geForce 2060 RTX card for . Afterwards, I decided to dedicate it to a Windows virtual machine, so I wanted to disable the nVidia drivers and switch to the vfio-pci driver, as described in "VGA PCI Passthrough guide on openSuSE Leap 42-2" (https://forums.opensuse.org/showthread.php/522015-VGA-PCI-Passthrough-guide…). Now when I try to rebuild my boot-loader with | dracut --force /boot/initrd 5.3.18-lp152.75-default the build fails with | dracut-install: ERROR: installing 'pci_stub' | dracut: FAILED: /usr/lib/dracut/dracut-install -D /var/tmp/dracut.2XbEWb/initramfs -N i2o_scsi| nvidia|nvidia_drm|nvidia-modeset|nvidia-uvm --kerneldir /lib/modules/5.3.18-lp152.75-default/ -m pci_stub vfio vfio_iommu_type1 vfio_pci vfio_virqfd kvm vm_intel and I'm not sure what to do to recover from this. And I forgot to add this link to the log output: https://paste.opensuse.org/3218884 Leslie -- openSUSE Leap 15.2 x86_64

1 0

dracut build fails installing pci_stub
by J Leslie Turriff 19 Jun '21

19 Jun '21

I recently added an nVidia geForce 2060 RTX card for . Afterwards, I decided to dedicate it to a Windows virtual machine, so I wanted to disable the nVidia drivers and switch to the vfio-pci driver, as described in "VGA PCI Passthrough guide on openSuSE Leap 42-2" (https://forums.opensuse.org/showthread.php/522015-VGA-PCI-Passthrough-guide…). Now when I try to rebuild my boot-loader with | dracut --force /boot/initrd 5.3.18-lp152.75-default the build fails with | dracut-install: ERROR: installing 'pci_stub' | dracut: FAILED: /usr/lib/dracut/dracut-install -D /var/tmp/dracut.2XbEWb/initramfs -N i2o_scsi| nvidia|nvidia_drm|nvidia-modeset|nvidia-uvm --kerneldir /lib/modules/5.3.18-lp152.75-default/ -m pci_stub vfio vfio_iommu_type1 vfio_pci vfio_virqfd kvm vm_intel and I'm not sure what to do to recover from this. Leslie -- openSUSE Leap 15.2 x86_64

1 0

Wayland, persistend switch
by JJM de Faber 18 Jun '21

18 Jun '21

Using: Tumbleweed up to date with KDE. Using at login a wayland selection is not persistend after reboot. How and where can I configure this selection in a permanent way. ??? Thanks, Hans

2 2

Wrong download link on website!
by Christof Hanke 17 Jun '21

17 Jun '21

Hello, I'm not sure if this is the right list. But maybe someone knows what to do... I'm installing Leap15.3 right now, but the download link on www.opensuse.org is broken. I just checked for the Network image. The download link points to https://download.opensuse.org/distribution/leap/15.3/iso/openSUSE-Leap-15.3… but all I could find was this on a mirror (I just checked this one): https://ftp.gwdg.de/pub/opensuse/distribution/leap/15.3/iso/openSUSE-Leap-1… It seems to work fine, but a broken link on the download page is a bit embarassing. Could someone check this? Cheers, Christof

2 7

ConvertAll
by Douglas McGarrett 17 Jun '21

17 Jun '21

ConvertAll is a very handy unit converter which will turn mm to inches, light years to miles. and just about anything in between. Zypper can't find it. I have downloaded a .tar.gz file. I have unzipped the tar.gz. file, but zypper can't seem to deal with that either. What must I do to install it? --doug

9 20

Verifying new Tumbleweed repository package signing keys
by Hector Sanjuan 16 Jun '21

16 Jun '21

Hello, yesterday zypper complained about new package signing keys for: [http://download.opensuse.org/repositories/openSUSE:/Tumbleweed/standard/](h… However, I could not find a place to verify that the key shown to me (and which I guess should have corresponded to one of gpg-pubkey-3dbdc284-53674dd4.asc gpg-pubkey-39db7c82-5f68629b.asc gpg-pubkey-307e3d54-5aaa90a5.asc found in the repository) was legit. Are there announcements about key rotations? Is there a secondary source where the signing keys are published other than the repo itself which is asking me about accepting its own new keys? What do "307e3d54" and "5aaa90a5" in gpg-pubkey-307e3d54-5aaa90a5.asc mean, as it does not seem to be related to the key fingerprint ? The fact that half of my repos were added with HTTP by default (1-click-installs etc) and that I could not readily verify if new keys are legit defeats a lot of the purpose of having signed packages. Regards, -- Hector

2 4

zypper repos erro
by Marco Calistri 16 Jun '21

16 Jun '21

Since some days I get errors like this (sorry to be in my language but I'm sure you understand the issue). When it happens I delete the specific repository or disable then execute the zypper ref again. - Errore di download (curl) per 'https://download.opensuse.org/repositories/Education/openSUSE_Tumbleweed/re…': Codice di errore: Curl error 16 Messaggio di errore: - Can't provide /repodata/repomd.xml Is it a known problem at opensuse? Thanks for your attention. Regards, P.S. list opensuse-support(a)opensuse.org is still active? P.S. 2 this the third message with same context I'm trying to post on the mailing list without success, are there some not compliances with it? -- Marco Calistri Build: openSUSE Tumbleweed 20210611 Kernel:5.12.9-1-default Desktop: XFCE (4.16.0)

3 3