June 2021 - openSUSE Support - openSUSE Mailing Lists

Frequent zypper repos erro
by Marco Calistri 16 Jun '21

16 Jun '21

Since some days I get errors like this (sorry to be in my language but I'm sure you understand the issue). When it happens I delete the specific repository or disable then execute the zypper ref again. - Errore di download (curl) per 'https://download.opensuse.org/repositories/Education/openSUSE_Tumbleweed/re…': Codice di errore: Curl error 16 Messaggio di errore: - Can't provide /repodata/repomd.xml Is it a known problem at opensuse? Thanks for your attention. Regards, P.S. list opensuse-support(a)opensuse.org is still active? -- Marco Calistri Build: openSUSE Tumbleweed 20210611 Kernel:5.12.9-1-default Desktop: XFCE (4.16.0)

1 1

how many files should /var/adm/backup/rpmdb have in it?
by Felix Miata 16 Jun '21

16 Jun '21

Right now I have 5 files of more than 60000K each. Maybe the better question would be: when do older copies of Packages*.gz serve no purpose? Is there any point to keeping copies that are more than a year old? 6 months? 3 months? More than 1-2 copies regardless of age? Is there something that deletes the oldest after a certain age or number of copies? -- Evolution as taught in public schools is, like religion, based on faith, not based on science. Team OS/2 ** Reg. Linux User #211409 ** a11y rocks! Felix Miata

3 5

Frequent zypper repos erro
by Marco Calistri 14 Jun '21

14 Jun '21

Since some days I get errors like this (sorry to be in my language but I'm sure you understand the issue). When it happens I delete the specific repository or disable then execute the zypper ref again. - Errore di download (curl) per 'https://download.opensuse.org/repositories/Education/openSUSE_Tumbleweed/re…': Codice di errore: Curl error 16 Messaggio di errore: - Can't provide /repodata/repomd.xml Is it a known problem at opensuse? Thanks for your attention. Regards, -- Marco Calistri Build: openSUSE Tumbleweed 20210606 Kernel:5.12.9-1-default Desktop: XFCE (4.16.0)

2 1

Frequent zypper repos erro
by Marco Calistri 14 Jun '21

14 Jun '21

Since some days I get errors like this (sorry to be in my language but I'm sure you understand the issue). When it happens I delete the specific repository or disable then execute the zypper ref again. - Errore di download (curl) per 'https://download.opensuse.org/repositories/Education/openSUSE_Tumbleweed/re…': Codice di errore: Curl error 16 Messaggio di errore: - Can't provide /repodata/repomd.xml Is it a known problem at opensuse? Thanks for your attention. Regards, -- Marco Calistri Build: openSUSE Tumbleweed 20210606 Kernel:5.12.9-1-default Desktop: XFCE (4.16.0)

2 1

Re: Both XFCE and Upower unable to execute the "Hybrid-Sleep"
by Marco Calistri 14 Jun '21

14 Jun '21

Il 11/06/21 16:12, TomasK ha scritto: > I have had similar sounding issues - my "slightly" annoying, but > always working solution: > > sudo systemctl suspend > > Hope that helps, Tomas > > On Fri, 2021-06-11 at 15:15 -0300, Marco Calistri wrote: >> Hello, >> >> From some quite time I'm trying to enable the hybrid-sleep feature >> whenever battery level hit the critical threshold. >> >> Despite the fact that by running the command from the console it >> works perfectly, it doesn't using Upower or Xfce-power-manager. >> >> In the better cases I just obtain the Hibernate of the system. >> >> Is there anybody having a solution for this? >> >> I would like to both suspend and saving on disk my windows and tasks >> opened if the battery drops to critical charge. >> >> Thanks for your attention. >> >> Regards, Yes it works but I would like it were automatic from daemon management, you know? Without human action. Regards, -- Marco Calistri Build: openSUSE Tumbleweed 20210606 Kernel:5.12.9-1-default Desktop: XFCE (4.16.0)

1 0

Both XFCE and Upower unable to execute the "Hybrid-Sleep"
by Marco Calistri 11 Jun '21

11 Jun '21

Hello, From some quite time I'm trying to enable the hybrid-sleep feature whenever battery level hit the critical threshold. Despite the fact that by running the command from the console it works perfectly, it doesn't using Upower or Xfce-power-manager. In the better cases I just obtain the Hibernate of the system. Is there anybody having a solution for this? I would like to both suspend and saving on disk my windows and tasks opened if the battery drops to critical charge. Thanks for your attention. Regards, -- Marco Calistri Build: openSUSE Tumbleweed 20210606 Kernel:5.12.9-1-default Desktop: XFCE (4.16.0)

1 0

cups HP printer not working - Busy - "Waiting for the printer to become available."
by michael.kasimir＠gmx.de 10 Jun '21

10 Jun '21

Hi all, Busy - "Waiting for the printer to become available." I cannot get HP printer 2100 Series to run. For beginning analysis I tried the obvious: $ lsusb Bus 003 Device 002: ID 8087:8000 Intel Corp. Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 002: ID 0424:5534 Standard Microsystems Corp. Hub Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 006: ID 04f2:b3ca Chicony Electronics Co., Ltd Bus 001 Device 005: ID 03f0:581d Hewlett-Packard lt4112 Gobi 4G Module Network Device Bus 001 Device 009: ID 046d:c077 Logitech, Inc. M105 Optical Mouse Bus 001 Device 004: ID 8087:07dc Intel Corp. Bus 001 Device 002: ID 0424:2134 Standard Microsystems Corp. Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub $ $ sudo cat /etc/cups/printers.conf | egrep -i 'model|device' [sudo] password for root: MakeModel HP LaserJet 2100 - CUPS+Gutenprint v5.2.14 DeviceURI usb://HP/LaserJet%202100%20Series MakeModel HP LaserJet P3005 - CUPS+Gutenprint v5.2.14 DeviceURI hp:/usb/HP_LaserJet_P3005?serial=CNF1T65817 MakeModel HP LaserJet 2100 - CUPS+Gutenprint v5.2.14 DeviceURI usb://HP/LaserJet%202100%20Series $ $ lpstat -t -v -r -H scheduler is running system default destination: HP-LaserJet-2100-Series device for HP-LaserJet-2100-Series: usb://HP/LaserJet%202100%20Series device for HP-LaserJet-P3005: hp:/usb/HP_LaserJet_P3005?serial=CNF1T65817 device for hplaserjet2100series: usb://HP/LaserJet%202100%20Series HP-LaserJet-2100-Series accepting requests since Thu 10 Jun 2021 12:50:25 CEST HP-LaserJet-P3005 accepting requests since Thu 10 Dec 2020 16:12:28 CET hplaserjet2100series accepting requests since Fri 04 Jun 2021 17:30:42 CEST printer HP-LaserJet-2100-Series now printing HP-LaserJet-2100-Series-155. enabled since Thu 10 Jun 2021 12:50:25 CEST Waiting for the printer to become available. printer HP-LaserJet-P3005 disabled since Thu 10 Dec 2020 16:12:28 CET - Unplugged or turned off printer hplaserjet2100series disabled since Fri 04 Jun 2021 17:30:42 CEST - Unplugged or turned off HP-LaserJet-2100-Series-155 mick 29696 Thu 10 Jun 2021 12:50:25 CEST device for HP-LaserJet-2100-Series: usb://HP/LaserJet%202100%20Series device for HP-LaserJet-P3005: hp:/usb/HP_LaserJet_P3005?serial=CNF1T65817 device for hplaserjet2100series: usb://HP/LaserJet%202100%20Series scheduler is running /run/cups/cups.sock $ $ lpq HP-LaserJet-2100-Series is ready and printing Rank Owner Job File(s) Total Size active mick 155 Anschreiben_A.docx 29696 bytes $ What I found interesting is: scheduler is running I didn't start a scheduler and had no idea to kill the scheduler. I see here, the document ''Anschreiben_A.docx'' is in queue. Hope someone can help... Kind regards Michael Be Free, Be Linux

4 4

Re: zypper patch about to uninstall half (all?) of leap 15.3 installation?
by Bob Williams 09 Jun '21

09 Jun '21

On Tue, 8 Jun 2021 17:39:46 +0200 Marcus Meissner wrote: > HI, > > Update ... this is still work in progress, I hope I will get through > most of the issues this week. > > Ciao, Marcus Will you announce the completion of the work, so that we know when we can use zypper patch again? Bob -- Bob Williams System: Linux 5.3.18-lp152.50-default Desktop: KDE Frameworks: 5.71.0, Qt: 5.12.7 and Plasma: 5.18.5 https://useplaintext.email/

3 4

Re: laptop microphone stopped working - solution found
by Matthew 09 Jun '21

09 Jun '21

2 1

YaST2 Partitioner in Leap 15.3: Create New Partition Table is Missing
by Ali 09 Jun '21

09 Jun '21

Hi, In YaST2 Partitioner of Leap 15.2, by selecting modify for a disk an option appears to "Create New Partition Table". This is very useful especially in AutoYaST. However in Leap 15.3, there is no longer such an option. When a disk is selected, clicking the edit button no longer presents an option to create a new partition table; it just allows to create a filesystem on the whole disk. Is this change intentional? Thanks, Ali

1 1