August 2024 - openSUSE Support - openSUSE Mailing Lists

sftp broken in konqueror
by eddie 22 Oct '24

22 Oct '24

I installed Leap 15.5 today. I have several computers and communicate/transfer files between them using sftp in konqueror. I have submitted a bug report but I was wondering if anyone else has this problem and found a workaround or simple solution. My current workaround is to install the 15.4 files for konqueror and dolphin.

6 7

IR keymap rc-tevii-nec not found
by Peter Münster 03 Sep '24

03 Sep '24

Hi, After the last "zypper up" and a reboot, my remote control does not work anymore. This is the related error message: "kernel: rc_core: IR keymap rc-tevii-nec not found" I use Leap 15.5 with a custom kernel 6.8.8-lp155.9.1-default. And yesterday, during the update, /boot/initrd-6.8.8-lp155.9.1-default has been updated. I guess, that the problem is related to this file, because nothing has changed in /lib/modules/6.8.8-lp155.9.1-default. Before the update, I used to have this line in the journal: "kernel: Registered IR keymap rc-tevii-nec" How could I get back the keymap please? TIA for any hints, -- Peter

2 3

Install ubuntu package
by Christian Schmitz 01 Sep '24

01 Sep '24

Hello everyone: For work reason I need install a software package that only come on .deb package. https://www.renesas.com/us/en/software-tool/go-configure-software-hub#downl… I try the install .deb file with Alien and dpkg with no sucess. dpkg and Alien install fail requiring elemental libraries like libc6 that is installed (i check it) In the apendix you have the details. Best regards Christian #################################################### # Apendix 1 (commands try) Commands try: #alien -r go-configure......deb #alien -i go-configure......deb #alien -i --scripts go-configure-sw-hub-v6.44.001-ubuntu-22.04-amd64.deb #dpkg i go-configure.... For details: #######################################################33 # Apendix 2 commands results # #######################################################33 # Try 1 # alien -r --scripts go-configure-sw-hub-v6.44.001-ubuntu-22.04-amd64.deb Package build failed. Here's the log of the command (cd go-configure-sw-hub-6.44; rpmbuild --buildroot='/home/wolf/Descargas/go-configure-sw-hub-6.44' -bb --target x86_64 'go-configure-sw-hub-6.44-2.spec'): Construyendo las plataformas de destino: x86_64 Construyendo para el destino x86_64 Procesando archivos: go-configure-sw-hub-6.44-2.x86_64 error: File not found: /home/wolf/Descargas/go-configure-sw-hub-6.44/usr/local/go-configure-sw-hub/share/application-notes/an-cm-265/an-cm-265-0-100.gp5 RPM build errors: File not found: /home/wolf/Descargas/go-configure-sw-hub-6.44/usr/local/go-configure-sw-hub/share/application-notes/an-cm-265/an-cm-265-0-100.gp5 #########################################################3 # Try 2 # alien -i --scripts go-configure-sw-hub-v6.44.001-ubuntu-22.04-amd64.deb dpkg --no-force-overwrite -i go-configure-sw-hub-v6.44.001-ubuntu-22.04-amd64.deb (Leyendo la base de datos ... 1859 ficheros o directorios instalados actualmente.) Preparando para desempaquetar go-configure-sw-hub-v6.44.001-ubuntu-22.04-amd64.deb ... Desempaquetando go-configure-sw-hub (6.44-1) sobre (6.44-1) ... dpkg: problemas de dependencias impiden la configuración de go-configure-sw-hub: go-configure-sw-hub depende de libasound2 (>= 1.0.17); sin embargo: El paquete `libasound2' no está instalado. go-configure-sw-hub depende de libc6 (>= 2.35); sin embargo: El paquete `libc6' no está instalado. go-configure-sw-hub depende de libcgraph6; sin embargo: El paquete `libcgraph6' no está instalado. go-configure-sw-hub depende de libcups2 (>= 1.4.0); sin embargo: El paquete `libcups2' no está instalado. go-configure-sw-hub depende de libdbus-1-3 (>= 1.9.14); sin embargo: El paquete `libdbus-1-3' no está instalado. go-configure-sw-hub depende de libdrm2 (>= 2.3.1); sin embargo: El paquete `libdrm2' no está instalado. go-configure-sw-hub depende de libegl1; sin embargo: El paquete `libegl1' no está instalado. go-configure-sw-hub depende de libexpat1 (>= 2.0.1); sin embargo: El paquete `libexpat1' no está instalado. go-configure-sw-hub depende de libfontconfig1 (>= 2.12.6); sin embargo: El paquete `libfontconfig1' no está instalado. go-configure-sw-hub depende de libfreetype6 (>= 2.9.1); sin embargo: El paquete `libfreetype6' no está instalado. go-configure-sw-hub depende de libgcc-s1 (>= 4.0); sin embargo: El paquete `libgcc-s1' no está instalado. go-configure-sw-hub depende de libgl1; sin embargo: El paquete `libgl1' no está instalado. go-configure-sw-hub depende de libglib2.0-0 (>= 2.26.0); sin embargo: El paquete `libglib2.0-0' no está instalado. go-configure-sw-hub depende de libgssapi-krb5-2 (>= 1.17); sin embargo: El paquete `libgssapi-krb5-2' no está instalado. go-configure-sw-hub depende de libgvc6; sin embargo: El paquete `libgvc6' no está instalado. go-configure-sw-hub depende de libnspr4 (>= 2:4.9-2~); sin embargo: El paquete `libnspr4' no está instalado. go-configure-sw-hub depende de libnss3 (>= 2:3.22); sin embargo: El paquete `libnss3' no está instalado. go-configure-sw-hub depende de libstdc++6 (>= 12); sin embargo: El paquete `libstdc++6' no está instalado. go-configure-sw-hub depende de libudev1 (>= 183); sin embargo: El paquete `libudev1' no está instalado. go-configure-sw-hub depende de libx11-6; sin embargo: El paquete `libx11-6' no está instalado. go-configure-sw-hub depende de libx11-xcb1 (>= 2:1.7.5); sin embargo: El paquete `libx11-xcb1' no está instalado. go-configure-sw-hub depende de libxcb-cursor0 (>= 0.0.99); sin embargo: El paquete `libxcb-cursor0' no está instalado. go-configure-sw-hub depende de libxcb-glx0; sin embargo: El paquete `libxcb-glx0' no está instalado. go-configure-sw-hub depende de libxcb-icccm4 (>= 0.4.1); sin embargo: El paquete `libxcb-icccm4' no está instalado. go-configure-sw-hub depende de libxcb-image0 (>= 0.2.1); sin embargo: El paquete `libxcb-image0' no está instalado. go-configure-sw-hub depende de libxcb-keysyms1 (>= 0.4.0); sin embargo: El paquete `libxcb-keysyms1' no está instalado. go-configure-sw-hub depende de libxcb-randr0 (>= 1.12); sin embargo: El paquete `libxcb-randr0' no está instalado. go-configure-sw-hub depende de libxcb-render-util0; sin embargo: El paquete `libxcb-render-util0' no está instalado. go-configure-sw-hub depende de libxcb-render0; sin embargo: El paquete `libxcb-render0' no está instalado. go-configure-sw-hub depende de libxcb-shape0; sin embargo: El paquete `libxcb-shape0' no está instalado. go-configure-sw-hub depende de libxcb-shm0 (>= 1.10); sin embargo: El paquete `libxcb-shm0' no está instalado. go-configure-sw-hub depende de libxcb-sync1; sin embargo: El paquete `libxcb-sync1' no está instalado. go-configure-sw-hub depende de libxcb-xfixes0; sin embargo: El paquete `libxcb-xfixes0' no está instalado. go-configure-sw-hub depende de libxcb-xkb1; sin embargo: El paquete `libxcb-xkb1' no está instalado. go-configure-sw-hub depende de libxcb1 (>= 1.9.2); sin embargo: El paquete `libxcb1' no está instalado. go-configure-sw-hub depende de libxcomposite1 (>= 1:0.4.5); sin embargo: El paquete `libxcomposite1' no está instalado. go-configure-sw-hub depende de libxdamage1 (>= 1:1.1); sin embargo: El paquete `libxdamage1' no está instalado. go-configure-sw-hub depende de libxext6; sin embargo: El paquete `libxext6' no está instalado. go-configure-sw-hub depende de libxfixes3; sin embargo: El paquete `libxfixes3' no está instalado. go-configure-sw-hub depende de libxi6; sin embargo: El paquete `libxi6' no está instalado. go-configure-sw-hub depende de libxkbcommon-x11-0 (>= 0.5.0); sin embargo: El paquete `libxkbcommon-x11-0' no está instalado. go-configure-sw-hub depende de libxkbcommon0 (>= 0.5.0); sin embargo: El paquete `libxkbcommon0' no está instalado. go-configure-sw-hub depende de libxkbfile1 (>= 1:1.1.0); sin embargo: El paquete `libxkbfile1' no está instalado. go-configure-sw-hub depende de libxrandr2; sin embargo: El paquete `libxrandr2' no está instalado. go-configure-sw-hub depende de libxrender1; sin embargo: El paquete `libxrender1' no está instalado. go-configure-sw-hub depende de libxshmfence1; sin embargo: El paquete `libxshmfence1' no está instalado. go-configure-sw-hub depende de libxtst6; sin embargo: El paquete `libxtst6' no está instalado. go-configure-sw-hub depende de zlib1g (>= 1:1.2.11); sin embargo: El paquete `zlib1g' no está instalado. dpkg: error al procesar el paquete go-configure-sw-hub (--install): problemas de dependencias - se deja sin configurar Se encontraron errores al procesar: go-configure-sw-hub Unable to install at /usr/lib/perl5/vendor_perl/5.40.0/Alien/Package/Deb.pm line 97. -- Be Free, Be Linux

8 11

NetworkManager dispatcher script does not finish when going to sleep
by mh＠mike.franken.de 27 Aug '24

27 Aug '24

Hi *, starting with the last two NetworkManager versions, my dispatcher script does not finish when going to sleep. It finishes on resume, though, causing some strange effects. It's runtime is 1 or 2 seconds only, so this is not a problem of hitting the dispatcher timeout. Anyway in this case it wouldn't continue after resume, I believe. Any idea, what is happening here, and how to avoid it? TIA. Bye. Michael.

4 30

journalctl day before yesterday
by mh＠mike.franken.de 23 Aug '24

23 Aug '24

Hi *, how do I specify the day before yesterday for journalctl output? journalctl --all --since=yesterday --until=today gives all entries from midnight to midnight yesterday. journalctl --all --since=-3d --until=-2d seems to output all entries between 72 hours and 48 hours back from actual time. And I don't want to enter an exact date, because I'd like to create aliases for this. TIA. Bye. Michael.

2 7

howto for ca-certificates package?
by mh＠mike.franken.de 22 Aug '24

22 Aug '24

Hi *, is there some howto for the ca-certificates package - not for the general purpose, which is clear, but for the handling. It contains two systemd services, but no timer unit. How should the service units be treated? TIA. Bye. Michael.

2 2

NTFS mount command
by JJM de Faber 22 Aug '24

22 Aug '24

What is the correct and most recent mount command for ntfs ? ntfs-3g or mount -t ntfs . What is the difference between this two ?

3 2

Kmail data reset
by Ianseeks 19 Aug '24

19 Aug '24

Hi I'm posting this on kdepim-users as well. Is there a way to remove all data for kmail for a user? I'm having all sorts of issues on one login. I don't know if I have a configuration error somewhere or a broken install. I'm using IMAP with postgresql as the backend (i've also tried mysql and the same things happen) I have tried removing the akonadi folder and let everything rebuild and its fine for about 5 minutes. 1. Everytime the "Interval Checking" kicks off (every 5 mins) I get a lot of repeat emails delivered to the inbox. 2. Most of the repeated emails are duplicates and greyed out in the inbox and cannot be accessed in order to delete them. Applying filters works on them though to move them from my IMAP folder to the Local Folders. 3. I deleted all the emails from my internet provider so its just using the local data store to produce these greyed out duplicate emails. 4. I have tried creating a new user and setting it up to acccess the same email account and this fails with exactly the same issue as new emails come in. 5. I have one other login (my personal one) and its not started to happen there as yet. I don't want to reinstall "Kmail/Kontact" in case it screws up this account too. The only difference between the account is I use "Kontact" with the working one and just Kmail with the broken ones. Does anyone have any ideas where I'm going wrong? regards Ian openSUSE Tumbleweed 20240816 kwin 6.1.4 kmail2 6.1.2 (24.05.2) - akonadiserver 6.1.2 (24.05.2) - Kernel: 6.10.4-1- default - kernel-firmware-radeon 20240809

1 1

[Leap 15.6] Docker-Compose 2.22 Broken
by Walddys Emmanuel Dorrejo Céspedes 16 Aug '24

16 Aug '24

Hello, I have close to two month with this bad packages: Name : docker-compose Version : 2.22.0-bp156.1.11 Here is the bugzilla with more infor https://bugzilla.suse.com/show_bug.cgi?id=1227185 Summary: When execute `podman compose` or `docker-compose` which is the binary that `podman compose` execute after being called, I got a infinite number of the line: ``` Tools:~ # podman compose Run compose workloads via an external provider such as docker-compose or podman-compose Description: This command is a thin wrapper around an external compose provider such as docker-compose or podman-compose. This means that podman compose is executing another tool that implements the compose functionality but sets up the environment in a way to let the compose provider communicate transparently with the local Podman socket. The specified options as well the command and argument are passed directly to the compose provider. The default compose providers are docker-compose and podman-compose. If installed, docker-compose takes precedence since it is the original implementation of the Compose specification and is widely used on the supported platforms (i.e., Linux, Mac OS, Windows). If you want to change the default behavior or have a custom installation path for your provider of choice, please change the compose_provider field in containers.conf(5). You may also set PODMAN_COMPOSE_PROVIDER environment variable. Usage: podman compose [options] Examples: podman compose -f nginx.yaml up --detach podman --log-level=debug compose -f many-images.yaml pull >>>> Executing external compose provider "/usr/bin/docker-compose". Please refer to the documentation for details. <<<< ``` Until it crash: ``` >>>> Executing external compose provider "/usr/bin/docker-compose". Please refer to the documentation for details. <<<< ``` Thank you.

2 2

[Leap 15.6] Can't limit container (podman) resources
by Walddys Emmanuel Dorrejo Céspedes 15 Aug '24

15 Aug '24

Hello, I am installing a gitlab rootless container in leap 15.6, but is falling to run: ``` podman run -d \ --replace \ --pull=newer \ --label "io.containers.autoupdate=registry" \ --restart unless-stopped \ --cpus 8 \ --memory 16g \ --name gitlab \ --hostname git.ind.local \ -v config:/etc/gitlab \ -v log:/var/log/gitlab \ -v data:/var/opt/gitlab \ -p 127.0.0.1:3500:80 \ -p 2222:22 \ --shm-size 256m \ docker.io/gitlab/gitlab-ee:latest ``` Getting this error: ``` Error: runc: runc create failed: unable to start container process: error during container init: error setting cgroup config for procHooks process: openat2 /sys/fs/cgroup/user.slice/user-35107.slice/user@35107.service/user.slice/libpod-a8d798bfbffe2391618b942d732d741ca37f2199b9a65cc6390ce96ace9f63a2.scope/memory.swap.max: no such file or directory: OCI runtime attempted to invoke a command that was not found ``` What can I do to make it work?, and there is some more limitations in leap 15.6

1 0