January 2019 - openSUSE Support - openSUSE Mailing Lists

[opensuse-support] user disappeared
by Adam Mizerski 16 Apr '19

16 Apr '19

Hi, I've got an odd problem, that probably deserves a bug report, but I don't know where to start looking for evidence. I'm running openSUSE 15.0 "transactional server" on a vps. I had freenet daemon installed, running as a dedicated "freenet" user. What happened is that the "freenet" user suddenly disappeared. It's not mentioned in /etc/passwd, /etc/shadow nor /etc/group. If I do "ls -l" in /home/freenet, there are numbers instead of owner and group. Service obviously fails to start. I had … [View More]

5 10

[opensuse-support] After upgrade to 15.0, restore from hibernation crashes the machine.
by Carlos E. R. 05 Apr '19

05 Apr '19

Black display, keyboard light responds initially, then not. ssh from another machine says there is no route to machine (works instantly after reboot). Means that network is dead on desktop. Log: <10.6> 2019-01-10 20:20:01 Telcontar cron 27759 - - pam_unix(crond:session): session opened for user cer by (uid=0) <10.6> 2019-01-10 20:20:02 Telcontar CRON 27759 - - pam_unix(crond:session): session closed for user cer <3.6> 2019-01-10 20:23:50 Telcontar systemd 1 - - Reached … [View More]target Sleep. <3.6> 2019-01-10 20:23:50 Telcontar systemd 1 - - Starting Hibernate... <0.7> 2019-01-10 20:23:50 Telcontar kernel - - - [117583.419978] PM: Hibernation mode set to 'platform' <3.6> 2019-01-10 20:23:50 Telcontar systemd-sleep 27981 - - INFO: running /usr/lib/systemd/system-sleep/grub2.sleep for hibernate <3.6> 2019-01-10 20:23:50 Telcontar systemd-sleep 27981 - - INFO: Running prepare-grub .. <3.6> 2019-01-10 20:23:50 Telcontar systemd-sleep 27981 - - 2019-01-10 20:23:50+01:00 - Hibernating the system now... <3.4> 2019-01-10 20:23:50 Telcontar systemd-sh - - - Hibernating the system now... <3.6> 2019-01-10 20:23:50 Telcontar systemd-sleep 27981 - - service: no such service upsd.service <3.6> 2019-01-10 20:23:51 Telcontar systemd-sleep 27981 - - running kernel is grub menu entry openSUSE Leap 15.0 (vmlinuz-4.12.14-lp150.12.28-default) <3.6> 2019-01-10 20:23:51 Telcontar systemd-sleep 27981 - - preparing boot-loader: selecting entry openSUSE Leap 15.0, kernel /boot/4.12.14-lp150.12.28-default <3.6> 2019-01-10 20:23:56 Telcontar systemd-sleep 27981 - - running /usr/sbin/grub2-once "openSUSE Leap 15.0" <3.6> 2019-01-10 20:23:56 Telcontar systemd-sleep 27981 - - time needed for sync: 5.2 seconds, time needed for grub: 0.2 seconds. <3.6> 2019-01-10 20:23:56 Telcontar systemd-sleep 27981 - - INFO: Done. <3.6> 2019-01-10 20:23:56 Telcontar systemd-sleep 27981 - - Suspending system... <0.6> 2019-01-10 20:23:57 Telcontar kernel - - - [117590.115929] PM: Syncing filesystems ... 2019-01-11 11:07:16+01:00 - Booting the system now ================================================================================ Linux Telcontar 4.12.14-lp150.12.28-default #1 SMP Mon Dec 3 16:46:15 UTC 2018 (b91289f) x86_64 x86_64 x86_64 GNU/Linux <3.6> 2019-01-11 11:07:18 Telcontar systemd 1 - - systemd 234 running in system mode. (+PAM -AUDIT +SELINUX -IMA +APPARMOR -SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT -GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD -IDN2 -IDN default-hierarchy=hybrid) Hibernation has worked in this machine reliably for about a decade - till 15.0 :-( -- Cheers / Saludos, Carlos E. R. (from 15.0 x86_64 at Telcontar) [View Less]

4 14

[opensuse-support] Sata SSD physical sector size shown as 512bytes? And other stuff when moving root drive to new physical drive.
by cagsm 31 Jan '19

31 Jan '19

Hi list, had thought that all SSD actually had like 4kilobytes as physical sector size and only 512bytes emulation stuff. My leap 15.0 machine upgraded the hardware of the root disk to SSD from HDD. fdisk -l now shows 512/512 for both logical and physical of this root disk. With the help of gparted distro, I have migrated, copied, over the / and /home partitions from the old HDD to the new empty SSD. Created, enlarged the partition sizes, and marked the / as bootable, and then used the rescue … [View More]

2 3

[opensuse-support] Tumbleweed Libreoffice Calc 6.2.0.3 sort window gets unreadable
by Peter McD 30 Jan '19

30 Jan '19

Hi, Today's update of LibreOffice to 6.2.0.3: I tried sorting in Calc, col B and A and the sort window gets unreadable. OpenCL is not activated. Test with a fresh table, sort A and B, result: sort window gets torn. col A col B 1 a 2 b 3 c System Tumbleweed with updates as they come. Peter -- To unsubscribe, e-mail: opensuse-support+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-support+owner(a)opensuse.org

1 0

[opensuse-support] Perl problem in SpamAssassin, uninitialized value.
by Carlos E. R. 29 Jan '19

29 Jan '19

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, I get tons of these in the log, and the "uninitialized" ones go also to the warning log. <2.6> 2019-01-28 23:40:31 Telcontar spamd 16758 - - spamd: connection from localhost [127.0.0.1]:35696 to port 783, fd 6 <2.6> 2019-01-28 23:40:31 Telcontar spamd 16758 - - spamd: setuid to cer succeeded <2.6> 2019-01-28 23:40:31 Telcontar spamd 16758 - - spamd: processing message <26edd7a4-9c65-0a7d-2d7d-289...> for cer:1000 … [View More]<2.4> 2019-01-28 23:40:32 Telcontar spamd 16758 - - Use of uninitialized value $4 in concatenation (.) or string at /usr/lib/perl5/vendor_perl/5.26.1/Mail/SpamAssassin/Plugin/URIDNSBL.pm line 1044. <2.4> 2019-01-28 23:40:32 Telcontar spamd 16758 - - Use of uninitialized value $3 in concatenation (.) or string at /usr/lib/perl5/vendor_perl/5.26.1/Mail/SpamAssassin/Plugin/URIDNSBL.pm line 1044. <2.4> 2019-01-28 23:40:32 Telcontar spamd 16758 - - Use of uninitialized value $2 in concatenation (.) or string at /usr/lib/perl5/vendor_perl/5.26.1/Mail/SpamAssassin/Plugin/URIDNSBL.pm line 1044. <2.4> 2019-01-28 23:40:32 Telcontar spamd 16758 - - dns: new_dns_packet (domain=...(.zen.spamhaus.org. type=A class=IN) failed: a domain name contains a null label <2.4> 2019-01-28 23:40:32 Telcontar spamd 16758 - - Use of uninitialized value $4 in concatenation (.) or string at /usr/lib/perl5/vendor_perl/5.26.1/Mail/SpamAssassin/Plugin/URIDNSBL.pm line 1044. <2.4> 2019-01-28 23:40:32 Telcontar spamd 16758 - - Use of uninitialized value $3 in concatenation (.) or string at /usr/lib/perl5/vendor_perl/5.26.1/Mail/SpamAssassin/Plugin/URIDNSBL.pm line 1044. <2.4> 2019-01-28 23:40:32 Telcontar spamd 16758 - - Use of uninitialized value $2 in concatenation (.) or string at /usr/lib/perl5/vendor_perl/5.26.1/Mail/SpamAssassin/Plugin/URIDNSBL.pm line 1044. <2.6> 2019-01-28 23:40:33 Telcontar spamd 16758 - - spamd: clean message (-2.5/5.0) for cer:1000 in 1.4 seconds, 11344 bytes. <2.6> 2019-01-28 23:40:33 Telcontar spamd 16758 - - spamd: result: . -2 - BAYES_00,HEADER_FROM_DIFFERENT_DOMAINS,MAILING_LIST_MULTI,RCVD_IN_DNSWL_MED,RDNS_NONE scantime=1.4,size=11344,user=cer,uid=1000,required_score=5.0,rhost=localhost,raddr=127.0.0.1,rport=35696,mid=<26edd7a4-9c65-0a7d-2d7d-289f2049cdff(a)iinet.net.au>,bayes=0.000069,autolearn=disabled <2.6> 2019-01-28 23:40:33 Telcontar spamd 3930 - - prefork: child states: BI <2.6> 2019-01-28 23:40:33 Telcontar spamd 3930 - - spamd: handled cleanup of child pid [16758] due to SIGCHLD: exit 0 <2.6> 2019-01-28 23:40:33 Telcontar spamd 3930 - - spamd: server successfully spawned child process, pid 16792 <2.6> 2019-01-28 23:40:33 Telcontar spamd 3930 - - prefork: child states: II <2.6> 2019-01-28 23:40:33 Telcontar spamd 3930 - - spamd: handled cleanup of child pid [16758] due to SIGCHLD: exit 0 <2.6> 2019-01-28 23:40:33 Telcontar spamd 3930 - - spamd: server successfully spawned child process, pid 16792 <2.6> 2019-01-28 23:40:33 Telcontar spamd 3930 - - prefork: child states: II <2.6> 2019-01-28 23:40:34 Telcontar spamd 16774 - - spamd: connection from localhost [127.0.0.1]:35702 to port 783, fd 6 <2.6> 2019-01-28 23:40:34 Telcontar spamd 16774 - - spamd: setuid to cer succeeded <2.6> 2019-01-28 23:40:34 Telcontar spamd 16774 - - spamd: processing message <5387304.rUZBsZdq...> for cer:1000 <2.4> 2019-01-28 23:40:34 Telcontar spamd 16774 - - Use of uninitialized value $4 in concatenation (.) or string at /usr/lib/perl5/vendor_perl/5.26.1/Mail/SpamAssassin/Plugin/URIDNSBL.pm line 1044, <GEN6687> line 265. <2.4> 2019-01-28 23:40:34 Telcontar spamd 16774 - - Use of uninitialized value $3 in concatenation (.) or string at /usr/lib/perl5/vendor_perl/5.26.1/Mail/SpamAssassin/Plugin/URIDNSBL.pm line 1044, <GEN6687> line 265. <2.4> 2019-01-28 23:40:34 Telcontar spamd 16774 - - Use of uninitialized value $2 in concatenation (.) or string at /usr/lib/perl5/vendor_perl/5.26.1/Mail/SpamAssassin/Plugin/URIDNSBL.pm line 1044, <GEN6687> line 265. <2.4> 2019-01-28 23:40:34 Telcontar spamd 16774 - - dns: new_dns_packet (domain=...(.zen.spamhaus.org. type=A class=IN) failed: a domain name contains a null label <2.4> 2019-01-28 23:40:34 Telcontar spamd 16774 - - Use of uninitialized value $4 in concatenation (.) or string at /usr/lib/perl5/vendor_perl/5.26.1/Mail/SpamAssassin/Plugin/URIDNSBL.pm line 1044, <GEN6687> line 265. <2.4> 2019-01-28 23:40:34 Telcontar spamd 16774 - - Use of uninitialized value $3 in concatenation (.) or string at /usr/lib/perl5/vendor_perl/5.26.1/Mail/SpamAssassin/Plugin/URIDNSBL.pm line 1044, <GEN6687> line 265. <2.4> 2019-01-28 23:40:34 Telcontar spamd 16774 - - Use of uninitialized value $2 in concatenation (.) or string at /usr/lib/perl5/vendor_perl/5.26.1/Mail/SpamAssassin/Plugin/URIDNSBL.pm line 1044, <GEN6687> line 265. <2.6> 2019-01-28 23:40:35 Telcontar spamd 16774 - - spamd: clean message (-2.5/5.0) for cer:1000 in 1.4 seconds, 11408 bytes. <2.6> 2019-01-28 23:40:35 Telcontar spamd 16774 - - spamd: result: . -2 - BAYES_00,HEADER_FROM_DIFFERENT_DOMAINS,MAILING_LIST_MULTI,MIME_QP_LONG_LINE,RCVD_IN_DNSWL_MED,RDNS_NONE scantime=1.4,size=11408,user=cer,uid=1000,required_score=5.0,rhost=localhost,raddr=127.0.0.1,rport=35702,mid=<5387304.rUZBsZdqEj(a)roadrunner.suse>,bayes=0.002213,autolearn=disabled <2.6> 2019-01-28 23:40:35 Telcontar spamd 3930 - - prefork: child states: BI <2.6> 2019-01-28 23:40:35 Telcontar spamd 3930 - - spamd: handled cleanup of child pid [16774] due to SIGCHLD: exit 0 It refers to this code: sub lookup_dnsbl_for_ip { my ($self, $pms, $obj, $ip) = @_; local($1,$2,$3,$4); $ip =~ /^(\d+)\.(\d+)\.(\d+)\.(\d+)$/; my $revip = "$4.$3.$2.$1"; <============ my $conf = $pms->{conf}; my $tflags = $conf->{tflags}; my $cfns = $pms->{uridnsbl_active_rules_nsrevipbl}; my $cfa = $pms->{uridnsbl_active_rules_arevipbl}; foreach my $rulename (keys %$cfa, keys %$cfns) { my $rulecf = $conf->{uridnsbls}->{$rulename}; # ips_only/domains_only lookups should not act on this kind of BL next if defined $tflags->{$rulename} && $tflags->{$rulename} =~ /\b(?:ips_only|domains_only)\b/; $self->lookup_single_dnsbl($pms, $obj, $rulename, $revip, $rulecf->{zone}, $rulecf->{type}); } } - -- Cheers Carlos E. R. (from 15.0 x86_64 at Telcontar) -----BEGIN PGP SIGNATURE----- iHoEARECADoWIQQZEb51mJKK1KpcU/W1MxgcbY1H1QUCXE+LRhwccm9iaW4ubGlz dGFzQHRlbGVmb25pY2EubmV0AAoJELUzGBxtjUfVIc8An03FgYIij2QPfc5/8iLM TS0DUrDMAJ0ZDrhxw5WawheYday+sHeYLEYpTw== =v4V6 -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse-support+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-support+owner(a)opensuse.org [View Less]

3 6

[opensuse-support] zypper search in repo
by Peter Suetterlin 28 Jan '19

28 Jan '19

Hi, I just wanted to see what I have in my private repository, and launched zypper search -s -r Selfcompiled It just ignores ignores the '-r' and lists packages from *all* enabled repos. Which is some 50000 :(( Is it too late and I'm doing something wrong, or is the latest zypper broken? -- To unsubscribe, e-mail: opensuse-support+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-support+owner(a)opensuse.org

1 1

[opensuse-support] YaST "boot loader" module error
by Carlos E. R. 28 Jan '19

28 Jan '19

Hi, I get a popup (paste fails, hand copy): Probing LUKS failed Unexpected situation found in the system. Click below to see more details (English only) Continue despite the error [continue][abort][details] Details gives another popup: command '/sbin/udevadm info '/dev/disk/by-uuid/39334baa-94...." failed: stderr: Unknown device, --name=, --path=, or absolute path in /dev/ or /sys expected. exit code: 4 Ideas? (I do have the save_y2logs output to report a bug) There is no /dev/disk/… [View More]

4 6

[opensuse-support] What happened to "cloneconfig" (kernel sources make)
by Carlos E. R. 28 Jan '19

28 Jan '19

Hi, I tried this, which had been working for a decade at least and is documented: Telcontar:~ # cd /usr/src/linux Telcontar:/usr/src/linux # make cloneconfig make[1]: *** No rule to make target 'cloneconfig'. Stop. make: *** [Makefile:569: cloneconfig] Error 2 Telcontar:/usr/src/linux # What? The documentation still says to use it: /usr/share/doc/packages/kernel-source-4.12.14-lp150.12.45/README.SUSE: «In addition, the running kernel exposes a gzip compressed version of its … [View More]

4 8

[opensuse-support] Where are the printer profiles?
by Carlos E. R. 28 Jan '19

28 Jan '19

I get these errors in the cups log, and a popup error when I print: E [18/Jan/2019:10:08:31 +0100] cp1510n_ps: File \"/Library/Printers/hp/Profiles/sRGB_A.icc\" not available: No such file or directory E [18/Jan/2019:10:08:31 +0100] cp1510n_ps: File \"/Library/Printers/hp/Profiles/CMYK_A.icc\" not available: No such file or directory E [18/Jan/2019:10:08:31 +0100] cp1510n_ps: File \"/Library/Printers/hp/Profiles/Gray_A.icc\" not available: No such file or directory It is not the first time I … [View More]

2 5

[opensuse-support] systemd warns of a bug
by Carlos E. R. 28 Jan '19

28 Jan '19

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 I see this warning on the log: <3.4> 2019-01-28 00:00:04 Telcontar systemd 1 - - Configuration file /usr/lib/systemd/system/ipmiseld.service is marked executable. Please remove executable permission bits. Proceeding anyway. Indeed, it is: Telcontar:~ # l /usr/lib/systemd/system/ipmiseld.service - -rwxr-xr-x 1 root root 163 Apr 23 2018 /usr/lib/systemd/system/ipmiseld.service* Telcontar:~ # Is it worth a bugzilla? - -- Cheers … [View More]

2 2

[opensuse-support] What means this error?
by Carlos E. R. 27 Jan '19

27 Jan '19

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, I get this in the warning log: <3.4> 2019-01-23 15:35:26 Telcontar systemd 1 - - nss-lookup.target: Dependency Before=nss-lookup.target dropped The file contains: Telcontar:~ # cat /usr/lib/systemd/system/nss-lookup.target # This file is part of systemd. # # systemd is free software; you can redistribute it and/or modify it # under the terms of the GNU Lesser General Public License as published by # the Free Software … [View More]

1 0

[opensuse-support] Correct usage of pam-config
by Bob Williams 27 Jan '19

27 Jan '19

I'm trying to set up a Yubikey Neo smartcard for two-factor authorisation on my laptop. System: openSUSE Leap 15.0 Desktop: KDE Plasma I have installed pam_yubico from the Main repository, and can see pam_yubico.so in /lib64/security. But when I try to add it to /etc/pam.d/common-auth, it fails: europa:~ # pam-config -a --pam_yubico /etc/pam.d/common-auth-pc: Unknown module pam_yubico.so, ignored! I could edit /etc/pam.d/common-auth directly, but the file contains warnings against this: #%… [View More]

2 3

[opensuse-support] Problem encountered, Community help needed
by Fraser_Bell 26 Jan '19

26 Jan '19

As you all may be aware, an IRC debate is usually held during the campaign phase of the openSUSE Board Elections. While we would like to have at least one during this campaign, we are having a bit of a problem finding someone to organize and Moderate the debate. Part of the problem is that the Moderator needs to be fluent in English. Also, we on the Elections Team are already loaded with work. So, we need a qualified openSUSE Member to step up and take care of this for us. It will take … [View More]

1 0

[opensuse-support] An Impossible Task: Are You Prepared?
by Fraser_Bell 26 Jan '19

26 Jan '19

IMPORTANT: DO NOT REPLY ON THIS LIST!!! IMPORTANT: DO NOT REPLY ON THIS LIST!!! Replies or comments should be made on the openSUSE Project Mailing List. ================ With only 8 days left to get your openSUSE Membership approved so you can vote in the openSUSE Board Elections, our "Meet the Candidates" series of openSUSE News Articles comes to an end with this final installment. Now it is up to you: Begin the almost impossible task of choosing between these Quality openSUSE … [View More]

1 0

[opensuse-support] 2018-2019 openSUSE Board Elections: Meet Nathan Wolf
by Fraser_Bell 26 Jan '19

26 Jan '19

IMPORTANT: DO NOT REPLY ON THIS LIST!!! IMPORTANT: DO NOT REPLY ON THIS LIST!!! Replies or comments should be made on the openSUSE Project Mailing List. ================ Only 9 days left to get your openSUSE Membership approved so you can vote in the openSUSE Board Elections. Here is the 6th installment in the "Meet Your openSUSE Board Elections Candidates" series at openSUSE News. Nathan Wolf aka futureboy and CubicleNate <url>https://news.opensuse.org/2019/01/26/2018-2019-… [View More]

1 0

[opensuse-support] Broken "pin" command in 15.0
by Carlos E. R. 25 Jan '19

25 Jan '19

cer@Telcontar:~> pin Gray_A.icc /usr/bin/pin: command substitution: line 89: unexpected EOF while looking for matching `"' /usr/bin/pin: command substitution: line 90: syntax error: unexpected end of file *** pin found no ARCHIVES_"".gz file in /var/lib/pin/ pin will copy the files, please enter root password : Password: File ARCHIVES.gz does exist. The offending lines are: [ -f /etc/SuSE-release ] && USED_VERSION="`grep VERSION /etc/SuSE-release | cut -f3 -d " "`" … [View More]

3 9

[opensuse-support] openSUSE Board: Making a Run for it.
by Fraser_Bell 25 Jan '19

25 Jan '19

IMPORTANT: DO NOT REPLY ON THIS LIST!!! IMPORTANT: DO NOT REPLY ON THIS LIST!!! Replies or comments should be made on the openSUSE Project Mailing List. ================ Only 10 days left to get your openSUSE Membership approved so you can vote in the openSUSE Board Elections. Here is the 5th installment in the "Meet Your openSUSE Board Elections Candidates" series at openSUSE News. Meet Vinzenz Vietzke aka vinzv: <url>https://news.opensuse.org/2019/01/25/2018-2019-opensuse-… [View More]

1 0

[opensuse-support] vmware player no longer runs under Leap 15.0, library problems.
by Carlos E. R. 24 Jan '19

24 Jan '19

Telcontar:~ # vmplayer /usr/lib/vmware/bin/vmware-modconfig: Relink `/usr/lib64/libssh.so.4' with `/lib64/librt.so.1' for IFUNC symbol `clock_gettime' Telcontar:~ # I'm not sure of the version, as it doesn't run I can't ask. Could be version 12. The current version refuses to run. -- Cheers / Saludos, Carlos E. R. (from 15.0 x86_64 at Telcontar)

2 2

[opensuse-support] 2018-2019 openSUSE Board Election Candidates Update
by Fraser_Bell 24 Jan '19

24 Jan '19

IMPORTANT: DO NOT REPLY ON THIS LIST!!! IMPORTANT: DO NOT REPLY ON THIS LIST!!! Replies or comments should be made on the openSUSE Project Mailing List. ================ Only 11 days left to get your openSUSE Membership approved so you can vote in the openSUSE Board Elections. Here is the 4th installment in the "Meet Your openSUSE Board Elections Candidates" series at openSUSE News. Meet Sébastien Poher aka sogal: <url>https://news.opensuse.org/2019/01/24/2018-2019-opensuse-… [View More]

1 0

[opensuse-support] Only A Week and a Half left to Get Approved
by Fraser_Bell 23 Jan '19

23 Jan '19

IMPORTANT: DO NOT REPLY ON THIS LIST!!! IMPORTANT: DO NOT REPLY ON THIS LIST!!! Replies or comments should be made on the openSUSE Project Mailing List. ================ About 1.5 weeks left to get your openSUSE Membership approved so you can vote in the openSUSE Board Elections. Here is the 3rd installment in the "Meet Your openSUSE Board Elections Candidates" series at openSUSE News. Meet Incumbent Sarah Julia Kriesch: <url>https://news.opensuse.org/2019/01/23/2018-2019-… [View More]

1 0

[opensuse-support] 2FA for crypted disk
by Wolfgang Rosenauer 22 Jan '19

22 Jan '19

Hi, as I understand from searching around it should be possible to do something like 2FA for crypto devices (LUKS). Or at least some challenge response. I've got a Yubikey and I found an Ubuntu howto. Because this is a bit of a risky implementation when my crypted home partition is not accessible anymore I'm a bit hesitant to experiment like I do typically. Therefore: Does anyone have a pointer to an HOWTO which works for openSUSE Tumbleweed? Thanks, Wolfgang -- To unsubscribe, e-mail: … [View More]

5 8

[opensuse-support] Plasma Desktop Window Rules
by Bob Williams 22 Jan '19

22 Jan '19

openSUSE Leap 15.0 with KDE Plasma desktop. I have six virtual desktops and like certain programs to default to certain desktops. With KDE apps it's easy to define in System Settings > Window Management > Window Rules. I have one program that won't behave, however. Syncthing-GTK always opens on the current virtual desktop. Under the 'Window matching' tab, I currently have Window class (application): Exact Match syncthing-gtk Window role: Exact match mainwindow Window types: Normal … [View More]

4 6

[opensuse-support] Libre Office calc is always maximized, can not resize
by Carlos E. R. 22 Jan '19

22 Jan '19

Hi, Well, that's it, I can not resize the window. I right click on the panel entry, and "resize" is grayed out, and "unmaximize" does nothing. XFCE on 15.0 Default LO version. -- Cheers / Saludos, Carlos E. R. (from 15.0 x86_64 at Telcontar)

3 7

[opensuse-support] 2nd installment in "Meet Your openSUSE Board Elections Candidates" series
by Fraser_Bell 22 Jan '19

22 Jan '19

IMPORTANT: DO NOT REPLY ON THIS LIST!!! IMPORTANT: DO NOT REPLY ON THIS LIST!!! Replies or comments should be made on the openSUSE Project Mailing List. ================ Less than 2 weeks left until Ballots open. Here is article #2 in the "Meet Your Candidates" series of articles are being published on openSUSE News. <url>https://news.opensuse.org/2019/01/22/21530/</url> <url>https://en.opensuse.org/openSUSE:Board_election</url> -- -Gerry Makaro … [View More]

1 0

[opensuse-support] Incorrect date handling in Libre Office calc
by Carlos E. R. 21 Jan '19

21 Jan '19

Also, I have a column of dates that were entered as text by the originator of the page (XLS format): 03/12/2018 03/12/2018 03/12/2018 Previously, I would simply do a search and replace on the range, replacing every '/' with '/', and they were converted instantly to dates. But now I get this instead: 03/12/18 03/12/18 03/12/18 03/12/18 03/12/18 04/12/18 04/12/18 07/12/18 07/12/18 10/12/18 10/12/18 13/12/2018 17/12/2018 17/12/2018 17/12/2018 18/12/2018 21/12/… [View More]

2 3

[opensuse-support] I managed to crash gimp two times with the same photo save.
by Carlos E. R. 21 Jan '19

21 Jan '19

Hi, I scanned a document at 600dpi, then used "save/export clean" to jpg, and gimp crashed silently. The file was saved, though. I opened gimp again, scanned the same document without changing any setting, did "save/export clean" to another jpg file, and it crashed again. So I repeated a third time, but this time I started gimp from the terminal, to try see some message... but it did not crash. So I have no info... gimp-2.8.22-lp150.3.8.x86_64 -- Cheers / Saludos, Carlos E. R. (from … [View More]

1 0

[opensuse-support] Meet Your openSUSE Board Elections Candidates
by Fraser_Bell 21 Jan '19

21 Jan '19

IMPORTANT: DO NOT REPLY ON THIS LIST!!! IMPORTANT: DO NOT REPLY ON THIS LIST!!! Replies or comments should be made on the openSUSE Project Mailing List. ================ Two weeks left until Ballots open. A "Meet Your Candidates" series of articles are being published on openSUSE News. <url>https://news.opensuse.org/2019/01/21/2018-2019-opensuse-board-elections-mee…</url> <url>https://en.opensuse.org/openSUSE:Board_election</url> -- -Gerry Makaro openSUSE … [View More]

1 0

[opensuse-support] resolution change - resize and reposition windows
by mh＠mike.franken.de 20 Jan '19

20 Jan '19

Hi *, is there a feature in plasma5 or a tool that is able to reposition and resize windows relative to a resolution change of the root display? I had the problem, that after switching between my internal notebook screen and my external monitor plasma itself (except for the widgets) resized its elements properly, but all my running windows are too big or too small and have the wrong position. Though I switched off the notebook screen via xrandr in the sddm config scripts and also in kscreen, … [View More]

3 3

[opensuse-support] open ecard
by Wolfgang Rosenauer 19 Jan '19

19 Jan '19

Hi, has anyone got open ecard (supporting German ID) running on openSUSE (Leap 15.0 in my case)? https://www.openecard.org/startseite/ The Java application is simply telling me that it cannot start the application context and suggests that my smart card service is not running. Interestingly my HBCI chipcard works flawlessly and my card reader service is actually started. Any hints? Thanks, Wolfgang

3 4

[opensuse-support] Does NFS allow different encodings to be used on server/client side?
by Rainer Hantsch 18 Jan '19

18 Jan '19

Hello. While I use iso-8859-1 in my systems, my friend uses utf-8. This is actually no big issue when using rsync (as it can convert filenames on the fly), but now I wanted to use KODI on my FireTV stick. KODI appears to use only UTF8 when using its built-in nfs-client, or it has a bug and ignores the configured character set. Anyway, Kodi does not show German Umlauts therefore. Can I configure the kernel-nfs on my server to do something similar to rsync by using "--iconv=iso-8859-1,utf-… [View More]

4 10

[opensuse-support] ImageWriter
by mike 17 Jan '19

17 Jan '19

Trying to write an iso to a usb drive. Starting Imagewriter, usb drive shows for selection of drive to write to. Clicking on the correct ISO file imagewriter responds with- Sorry I can't write this iso. You need to use another program to write it to a DVD. OK so what the..........I selected the USB drive....bug ? Tumbleweed with latest updates. &… [View More]

10 23

[opensuse-support] nvidia 390.87 build fails with kernel-default-4.20.0-1.5.x86_64
by Patrick Shanahan 17 Jan '19

17 Jan '19

cannot compile kernel module for nvidia 390.87 (last for my card) with new kernel kernel-default-4.20.0-1.5.x86_64 sh ./NVIDIA-Linux-x86_64-390.87.run -aqs --install-libglvnd --no-drm /var/log/nvidia-installer.log is here: http://wahoo.no-ip.org/~paka/nvidia-installer.log tks, -- (paka)Patrick Shanahan Plainfield, Indiana, USA @ptilopteri http://en.opensuse.org openSUSE Community Member facebook/ptilopteri Registered Linux User #207535 @… [View More]

1 0

[opensuse-support] After upgrading to 15.0, I find rpmsave files identical to the original
by Carlos E. R. 15 Jan '19

15 Jan '19

I found these two: Telcontar:~ # diff -s /etc/fonts/conf.d/10-rendering-options.conf.rpmsave /etc/fonts/conf.d/10-rendering-options.conf Files /etc/fonts/conf.d/10-rendering-options.conf.rpmsave and /etc/fonts/conf.d/10-rendering-options.conf are identical Telcontar:~ # diff -s /etc/fonts/conf.d/58-family-prefer-local.conf.rpmsave /etc/fonts/conf.d/58-family-prefer-local.conf Files /etc/fonts/conf.d/58-family-prefer-local.conf.rpmsave and /etc/fonts/conf.d/58-family-prefer-local.conf are … [View More]

3 7

[opensuse-support] Ready! Set! GO!!!
by Fraser_Bell 15 Jan '19

15 Jan '19

IMPORTANT: DO NOT REPLY ON THIS LIST!!! IMPORTANT: DO NOT REPLY ON THIS LIST!!! Replies or comments should be made on the openSUSE Project Mailing List. ================ *... and they're off!* <url>https://news.opensuse.org/2019/01/15/and-the-race-is-on-2018-2019-opensuse-…</url> <url>https://en.opensuse.org/openSUSE:Board_election#2018-2019_openSUSE_Board_Ca…</url> -- -Gerry Makaro openSUSE Board Elections Committee (election-officials **at** openSUSE.org) … [View More]

1 0

[opensuse-support] Tumbleweed - Plymouth: No splash screen on boot
by mh＠mike.franken.de 14 Jan '19

14 Jan '19

Hi, I didn't care in the past for the missing plymouth boot screen on all of my Tumbleweed clients, but lately I installed a new notebook with an encrpyted root partition. Now I'd like to see the splash screen and escpecially the graphical password prompt for the encrypted root partition. I followed a lot of hints from the internet, but didn't succeed - no boot splash at all. I get a splash screen during shutdown now, though. What did I do: - reinstalled all plymouth packages - modfied … [View More]

3 5

[opensuse-support] Tumbleweed - unable to connect Apple Thunderbolt Display to Lenovo Thinkpad P52
by Robert Munteanu 14 Jan '19

14 Jan '19

Hi, I am having problems with connecting my laptop to an Apple Thunderbolt Display [1]. The P52 has two Thunderbolt over USB-C ports and I am connecting it to the Apple Display using an Apple adapter. A colleague has validated that the display works with a Macbook using a similar adapter. I am using the 'Discrete Graphics' setting and using the proprietary nvidia driver version 410.93. I have checked the following: - in the BIOS Thunderbolt assist is disabled ( should not be necessary … [View More]_and_ it is reported to brick the laptop [2] ) - in the BIOS I have set the security level to 'none' - in Gnome the 'Thunderbolt' panel displays 'Thunderbolt could not be detected' - xrandr -q does not return any connected displays $ xrandr -q Screen 0: minimum 8 x 8, current 3840 x 2160, maximum 32767 x 32767 DP-0 disconnected (normal left inverted right x axis y axis) DP-1 disconnected (normal left inverted right x axis y axis) HDMI-0 disconnected (normal left inverted right x axis y axis) DP-2 connected primary 3840x2160+0+0 (normal left inverted right x axis y axis) 344mm x 193mm 3840x2160 60.00*+ DP-3 disconnected (normal left inverted right x axis y axis) DP-4 disconnected (normal left inverted right x axis y axis) - tbtadm devices returns no entries. However, tbtadm topology does recognize the host $ tbtadm topology Controller 0 └─ Details: ├─ Name: P52, Lenovo └─ Security level: SL0 (none) In case it helps, here's the lspci -vt output $ sudo lspci -vt -[0000:00]-+-00.0 Intel Corporation 8th Gen Core Processor Host Bridge/DRAM Registers +-01.0-[01]--+-00.0 NVIDIA Corporation GP107GLM [Quadro P2000 Mobile] | \-00.1 NVIDIA Corporation GP107GL High Definition Audio Controller +-04.0 Intel Corporation Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor Thermal Subsystem +-08.0 Intel Corporation Xeon E3-1200 v5/v6 / E3-1500 v5 / 6th/7th Gen Core Processor Gaussian Mixture Model +-12.0 Intel Corporation Cannon Lake PCH Thermal Controller +-14.0 Intel Corporation Cannon Lake PCH USB 3.1 xHCI Host Controller +-14.2 Intel Corporation Cannon Lake PCH Shared SRAM +-14.3 Intel Corporation Wireless-AC 9560 [Jefferson Peak] +-15.0 Intel Corporation Device a368 +-16.0 Intel Corporation Cannon Lake PCH HECI Controller +-16.3 Intel Corporation Device a363 +-1b.0-[02]-- +-1b.4-[03]----00.0 Intel Corporation Device 7360 +-1c.0-[04-6e]----00.0-[05-6e]--+-00.0-[06]----00.0 Intel Corporation JHL7540 Thunderbolt 3 NHI [Titan Ridge 4C 2018] | +-01.0-[07-39]-- | +-02.0-[3a]----00.0 Intel Corporation JHL7540 Thunderbolt 3 USB Controller [Titan Ridge 4C 2018] | \-04.0-[3b-6e]-- +-1c.7-[70]----00.0 Realtek Semiconductor Co., Ltd. RTS525A PCI Express Card Reader +-1d.0-[71]----00.0 Samsung Electronics Co Ltd NVMe SSD Controller SM981/PM981 +-1e.0 Intel Corporation Device a328 +-1f.0 Intel Corporation Device a30e +-1f.3 Intel Corporation Cannon Lake PCH cAVS +-1f.4 Intel Corporation Cannon Lake PCH SMBus Controller +-1f.5 Intel Corporation Cannon Lake PCH SPI Controller \-1f.6 Intel Corporation Ethernet Connection (7) I219-LM At this point I have no idea where to go next. Thunderbolt support should be there (both hardware and software) . All of the above listings have been taken with the display connected. Any ideas on how to debug or fix this would be appreciated. Thanks! Robert [1]: https://en.wikipedia.org/wiki/Apple_Thunderbolt_Display [2]: https://forums.lenovo.com/t5/ThinkPad-P-and-W-Series-Mobile/Lenovo-P52-bric… -- To unsubscribe, e-mail: opensuse-support+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-support+owner(a)opensuse.org [View Less]

2 6

[opensuse-support] LibreOffice cannot be started by normal user but no problem by root
by H Zeng 13 Jan '19

13 Jan '19

Hi there, I had posted a startup problem with LibreOffice recently. But mistakenly, I had posted it in a hijacking way. Thanks to Carlos for pointing out this and providing me some ideas along with other people. So I start a new thread because I need further help on this issue and here are something new I found on my problem. And the direction to solve the problem seems changed. For reference, following is the links to the posts in the hijacked thread: [1] https://lists.opensuse.org/… [View More]

3 17

[opensuse-support] 2018-2019 openSUSE Board Elections Race Heats Up
by Fraser_Bell 10 Jan '19

10 Jan '19

IMPORTANT: DO NOT REPLY ON THIS LIST!!! IMPORTANT: DO NOT REPLY ON THIS LIST!!! Replies or comments should be made on the openSUSE Project Mailing List. Six Impressive Candidates Step Up for the 2018-2019 Board Elections <url>https://news.opensuse.org/2019/01/10/six-impressive-candidates-step-up-for-…</url> <url>https://en.opensuse.org/openSUSE:Board_election</url> -- -Gerry Makaro openSUSE Board Elections Committee (election-officials **at** openSUSE.org) … [View More]

1 0

[opensuse-support] gdb debuginfo hint not working
by Matthias Brugger 09 Jan '19

09 Jan '19

Hi all, I'm trying to debug a coredump and I get the following message(s) in gdb: # gdb /usr/bin/perl my-coredump Reading symbols from /usr/bin/perl...Missing separate debuginfo for /usr/bin/perl Try: zypper install -C "debuginfo(build-id)=f5c0216c2b10d8e820097e6230026e83fc9906b4" (no debugging symbols found)...done. [...] So I tried: # sudo zypper install -C "debuginfo(build-id)=f5c0216c2b10d8e820097e6230026e83fc9906b4" Loading repository data... Reading installed packages... No provider of '… [View More]

3 5

[opensuse-support] Network watchdog
by Peter Suetterlin 09 Jan '19

09 Jan '19

Hi List, Last november, my remote home server went offline. When I finally could access it physically, the machine was all fine, just the connection to the outside world had been dead. A simple 'systemctl restart network' did bring it back (it's a wicked-managed dhcp connection). Now I wonder if there is some daemon existing that regularly checks if the outside connection is properly working and, if not, restarts the network. I'd have expected systemctl to do something like that. Or is it … [View More]

6 14

[opensuse-support] Two Candidates Officially Running for Election
by Fraser_Bell 09 Jan '19

09 Jan '19

IMPORTANT: DO NOT REPLY ON THIS LIST!!! IMPORTANT: DO NOT REPLY ON THIS LIST!!! Replies or comments should be made on the openSUSE Project Mailing List. Two Candidates have been qualified and are in the running for the openSUSE Board, which has three vacancies to fill. More Candidates are required, so please step up if you qualify. <url>https://news.opensuse.org/2019/01/09/first-two-candidates-for-the-2018-2019…</url> -- from: The Elections Committee: M. Edwin Zakaria Ish … [View More]

1 0

[opensuse-support] zypper ps reveals dirty system that cannot be corrected ???
by Patrick Shanahan 08 Jan '19

08 Jan '19

4 5

[opensuse-support] backintime-qt4-1.1.24-1.2.noarch is failing
by Patrick Shanahan 07 Jan '19

07 Jan '19

backintime-qt4 fails with following since early December 2018: Traceback (most recent call last): File "/usr/share/backintime/qt4/app.py", line 30, in <module> import qt4tools File "/usr/share/backintime/qt4/qt4tools.py", line 21, in <module> from PyQt4.QtGui import QFont, QFileDialog, QListView, QAbstractItemView, \ ModuleNotFoundError: No module named 'PyQt4.sip' who to contact, file bug report, or ??? was away for a month so didin't notice. tks, -… [View More]

1 1

[opensuse-support] Simple enabling of bluetooth activation on start
by Mykola Krachkovsky 07 Jan '19

07 Jan '19

Hi, I'm using bluetooth mouse for a quite time and only now solved the problem (mostly because never searched for solution seriously): bluetooth isn't activated in SDDM (and I think other DM too) at start and became active only after first login. SDDM just does nothing to bluetooth (which is totally ok to me) and at start bluetooth is off. If I'll login in tty and call `bluetoothctl power on` mouse activates as expected. bluetoothd man isn't very helpful, as it only states there is `/etc/… [View More]

1 0

[opensuse-support] Is openSUSE Worth This to You?
by Fraser_Bell 04 Jan '19

04 Jan '19

IMPORTANT: DO NOT REPLY ON THIS LIST!!! IMPORTANT: DO NOT REPLY ON THIS LIST!!! Replies or comments should be made on the openSUSE Project Mailing List. If you really are interested in the health of openSUSE and the openSUSE Project, there are some things you should be doing. <url>https://news.opensuse.org/2019/01/04/no-candidates-board-might-be-forced-to…</url> Get your openSUSE Membership, it is important for a Healthy Project. <url>https://en.opensuse.org/openSUSE:… [View More]

1 0

[opensuse-support] report bug to "packager" identified only by home:whatsmyname?
by Felix Miata 01 Jan '19

01 Jan '19

I want to use a package found only on software search in http://download.opensuse.org/repositories/home:/deltafox/openSUSE_Tumblewee… but rpm -qi shows vendor only as Distribution: home:deltafox / openSUSE_Tumbleweed How do I find out how to contact "deltafox", whose connect page https://connect.opensuse.org/pg/profile/deltafox provides no data and doesn't used either of his names in a B.O.O. email address? I tried to find an osc way to do this, but no luck. No deltafox in any IRC nicklists … [View More]

2 1