- openSUSE Build Service

Re: [opensuse-buildservice] OpenSuSE 10.0 - php5 Packages
by Cristian Rodriguez R. 08 Mar '07

08 Mar '07

Joerg Bingemer escribió: > Hi, > > changing this source leaded to the same errors :( > > Now I completly removed apache and php5 To have a clean start. I also > removed /etc/apache2 and all php stuff (as long yast hasn't removed it). dont forget apache2-mod_php5 ;) > What should be in my source list to make this work ? ok. add this: http://ftp-1.gwdg.de/pub/opensuse/repositories/Apache/SUSE_Linux_10.0/ http://ftp-1.gwdg.de/pub/opensuse/repositories/Apache:/Modules/Apache_SuSE_… http://ftp-1.gwdg.de/pub/opensuse/repositories/server:/php/server_apache_Su… (make sure you have the base official repos configured) install it again ;) Looks like you are attemption to use an old apache2-mod_php5 which will of course dont work.

1 0

[opensuse-buildservice] OpenSuSE 10.0 - php5 Packages
by Joerg Bingemer 08 Mar '07

08 Mar '07

Hi, I just found out about the Build Service, and already have a aproblem :( My target is to update php5 & apache2 on my OpenSuSE 10.0 Root Server. I added the following 3 sources with yast: http://software.opensuse.org/download/Apache/SUSE_Linux_10.0/ http://software.opensuse.org/download/Apache:/Modules/Apache_SuSE_Linux_10.… http://software.opensuse.org/download/server:/php/SUSE_Linux_10.0/ The updates of php5 itself are installing fine, but when I select the new Apache Version (2.2.4), yast is complaining about apache_mmn_20020903 which is not available. What am I doing wrong ? Any ideas or hints ? Best Regards Joerg --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-buildservice+help(a)opensuse.org

2 1

[opensuse-buildservice] Package overview for build repositories
by Dirk Stoecker 08 Mar '07

08 Mar '07

Hello, is there any list, where I can find out what repository contains which RPM's. When I get an dependency problem or expansion errors it would be helpful to have a look at the existing packages to find out, which one matches my needs. For now I always used rpmsearch to find that out, but this seems to be a very complicated way. A link somewhere from the package page to a complete list of available packages would be very helpful. Ciao -- http://www.dstoecker.eu/ (PGP key available) --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-buildservice+help(a)opensuse.org

3 6

[opensuse-buildservice] Other things to build then RPM's ...
by Jochen Hebbrecht 07 Mar '07

07 Mar '07

Imagine I also want to build OTHER things then RPM's. I have for example a lot of Java projects which I build with Maven. The problem is : the buildservice is using a spec file?! What can I do to build a Maven project? I could define a "dummy spec" file. %build => nothing %install mvn blabla .... .... and then just pack the WAR file in the RPM and deliver it. But that's not what I want. I want my buildscript to say: hey you! build me this using maven and deliver me a WAR file, and no RPM Is that situation possible? And what happens when you build on the Ubuntu distro? Ubuntu isn't really able to build RPM's ... --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-buildservice+help(a)opensuse.org

4 6

[opensuse-buildservice] Prefer rules for factory (xml-commons-apis / xml-commons-resolver)
by Daniel Bornkessel 07 Mar '07

07 Mar '07

Hi. Can you add two rules to the factory configuration: Prefer: xml-commons-apis Prefer: xml-commons-resolver Thanks, Daniel --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-buildservice+help(a)opensuse.org

1 0

[opensuse-buildservice] build09 has to many open files again
by Dirk Stoecker 07 Mar '07

07 Mar '07

Hello nothing more to say :-) Ciao -- http://www.dstoecker.eu/ (PGP key available) --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-buildservice+help(a)opensuse.org

3 2

[opensuse-buildservice] Build/Rpm.pm not found on SLE_10 i586
by Olly Betts 06 Mar '07

06 Mar '07

My package build is succeeding on the other platforms, but it fails on SLE_10 i586 (SLE_10 x86_64 works though). The error message sounds like it's a problem with the buildservice itself (if not, what am I doing wrong?) The full log is here: http://build.opensuse.org/package/live_build_log?package=Xapian&repository=… It ends after installing lots of packages with: [snip] Executing /sbin/conf.d/SuSEconfig.sortpasswd... Executing /sbin/conf.d/SuSEconfig.zmessages... Finished. Can't locate Build/Rpm.pm in @INC (@INC contains: /.build /usr/lib/perl5/5.8.8/i586-linux-thread-multi /usr/lib/perl5/5.8.8 /usr/lib/perl5/site_perl/5.8.8/i586-linux-thread-multi /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl /usr/lib/perl5/vendor_perl/5.8.8/i586-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.8 /usr/lib/perl5/vendor_perl .) at /.build/Build.pm line 9. BEGIN failed--compilation aborted at /.build/Build.pm line 9. Compilation failed in require at /.build/substitutedeps line 9. BEGIN failed--compilation aborted at /.build/substitutedeps line 9. md: stopping all md devices. xenbus_dev_shutdown: device/console/0: Initialising != Connected, skipping System halted. Cheers, Olly --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-buildservice+help(a)opensuse.org

2 1

[opensuse-buildservice] Build error on Build08 (Fedora 4 and 5)
by Dirk Stoecker 06 Mar '07

06 Mar '07

Hello, Build08 has an error (with Fedora 4 and 5 at least) http://build.opensuse.org/package/live_build_log?package=recover&repository… and http://build.opensuse.org/package/live_build_log?package=recover&repository… I did not trigger rebuilt, so the error should not disappear. Ciao -- http://www.dstoecker.eu/ (PGP key available) --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-buildservice+help(a)opensuse.org

3 3

[opensuse-buildservice] trivial fix for bs_sched
by Robert Schiele 02 Mar '07

02 Mar '07

Hello! Please apply the following trivial fix: Index: src/backend/bs_sched =================================================================== --- src/backend/bs_sched (revision 1377) +++ src/backend/bs_sched (working copy) @@ -713,7 +713,7 @@ $str .= "VERSION 1.0-0\n"; $str .= "LABEL $title\n"; $str .= "VENDOR openSUSE Build Service\n"; - $str .= "ARCH.x86_64 x86_64 i686 i586 i486 i386 noarch\nARCH.i686 i686 i586 i486 i386 noarch\nARCH.i586 i586 i486 i386 noarch\nDEFAULTBASE i586\n"; + $str .= "ARCH.x86_64 x86_64 i686 i586 i486 i386 noarch\nARCH.ppc64 ppc64 ppc noarch\nARCH.ppc ppc noarch\nARCH.i686 i686 i586 i486 i386 noarch\nARCH.i586 i586 i486 i386 noarch\nDEFAULTBASE i586\n"; $str .= "DESCRDIR descr\n"; $str .= "DATADIR .\n"; writestr("$extrep/.content", "$extrep/content", $str); Robert -- Robert Schiele Dipl.-Wirtsch.informatiker mailto:rschiele@gmail.com "Quidquid latine dictum sit, altum sonatur."

2 1

[opensuse-buildservice] FUSE project?
by Christoph Thiel 02 Mar '07

02 Mar '07

Hi folks, my home:cthiel1 project has quite some FUSE (and related) packages. So I thought, it might make sense to start a FUSE project. Any naming suggestions? Best, Christoph -- Christoph Thiel, Tech. Project Management, Research & Development SUSE LINUX Products GmbH, GF: Markus Rex, HRB 16746 (AG Nürnberg) --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-buildservice+help(a)opensuse.org

8 20