- openSUSE Build Service

[opensuse-buildservice] Re: [opensuse-packaging] mingw cross-toolchain
by Robert Schiele 13 Mar '07

13 Mar '07

On Thu, Jan 11, 2007 at 07:40:32PM +0100, Robert Schiele wrote: > On Thu, Jan 11, 2007 at 03:42:20PM +0100, Ludwig Nussel wrote: > > Robert Schiele wrote: > > > I have packaged a cross-toolchain for Windows machines based on the latest > > > releases of the mingw gcc port. You can find everything at > > > http://pi3.informatik.uni-mannheim.de/~schiele/suse/. > > > > That's nice. Would you mind putting that into the build service? > > I can make a copy there if this is desired. Just suggest a project name. Since no project name was suggested for 6 weeks I just took CrossToolchain:mingw. Unfortunately a linker crash occurred for all 10.0 or newer distributions that cannot be reproduced on the respective systems locally. Thus binaries for these distributions are not available in the build service but have to be fetched from the URL above. Robert -- Robert Schiele Dipl.-Wirtsch.informatiker mailto:rschiele@gmail.com "Quidquid latine dictum sit, altum sonatur."

3 7

[opensuse-buildservice] build08 error
by Thomas Anders 12 Mar '07

12 Mar '07

I'm currently getting a strange error from build08: - --- snip --- build08 started "build net-snmp_5.2.4+svn.dsc" at Mon Mar 12 18:43:52 UTC 2007. Building 'net-snmp-5.2-snapshot' for project 'net-snmp' target 'Debian_Etch' arch 'i586' srcmd5 'c0045a977577acb2b06aad157930eee5' [...] Error: Device 769 (vbd) could not be connected. Hotplug scripts not working. Using config file "/var/run/bsworker_7/build/xen.conf". - --- snap --- and the build is marked as failed. Full details: https://api.opensuse.org/result/net-snmp/Debian_Etch/net-snmp-5.2-snapshot/… What's wrong? +Thomas -- Thomas Anders (thomas.anders at blue-cable.de) --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-buildservice+help(a)opensuse.org

2 1

[opensuse-buildservice] Webclient
by Dirk Stoecker 12 Mar '07

12 Mar '07

Hello, When Removing a package from a project and afterwards displaying the project monitor an exception occurs: Error Details: Errorcode: 500 Message: undefined method `code' for nil:NilClass Exception from Webclient: ActionView::TemplateError: undefined method `code' for nil:NilClass Stack Trace: On line #51 of app/views/project/monitor.rhtml 48: # sane default - TODO: fix this in the controller 49: status = 'unknown' 50: status = @statushash[repo][arch][packname] 51: case status.code 52: when 'failed' 53: @failed[packname] = true 54: when 'expansion error' #{RAILS_ROOT}/app/views/project/monitor.rhtml:51:in `_run_rhtml_project_monitor' #{RAILS_ROOT}/app/views/project/monitor.rhtml:46:in `_run_rhtml_project_monitor' #{RAILS_ROOT}/app/views/project/monitor.rhtml:45:in `_run_rhtml_project_monitor' #{RAILS_ROOT}/app/views/project/monitor.rhtml:40:in `_run_rhtml_project_monitor' /usr/lib64/ruby/gems/1.8/gems/actionpack-1.12.3/lib/action_view/base.rb:314:in `compile_and_render_template' /usr/lib64/ruby/gems/1.8/gems/actionpack-1.12.3/lib/action_view/base.rb:290:in `render_template' /usr/lib64/ruby/gems/1.8/gems/actionpack-1.12.3/lib/action_view/base.rb:249:in `render_file' /usr/lib64/ruby/gems/1.8/gems/actionpack-1.12.3/lib/action_controller/base.rb:699:in `render_file' /usr/lib64/ruby/gems/1.8/gems/actionpack-1.12.3/lib/action_controller/base.rb:621:in `render_with_no_layout' /usr/lib64/ruby/gems/1.8/gems/actionpack-1.12.3/lib/action_controller/layout.rb:243:in `render_without_benchmark' /usr/lib64/ruby/gems/1.8/gems/actionpack-1.12.3/lib/action_controller/benchmarking.rb:53:in `render' /usr/lib64/ruby/1.8/benchmark.rb:293:in `measure' /usr/lib64/ruby/gems/1.8/gems/actionpack-1.12.3/lib/action_controller/benchmarking.rb:53:in `render' /usr/lib64/ruby/gems/1.8/gems/actionpack-1.12.3/lib/action_controller/base.rb:911:in `perform_action_without_filters' /usr/lib64/ruby/gems/1.8/gems/actionpack-1.12.3/lib/action_controller/filters.rb:368:in `perform_action_without_benchmark' /usr/lib64/ruby/gems/1.8/gems/actionpack-1.12.3/lib/action_controller/benchmarking.rb:69:in `perform_action_without_rescue' /usr/lib64/ruby/1.8/benchmark.rb:293:in `measure' /usr/lib64/ruby/gems/1.8/gems/actionpack-1.12.3/lib/action_controller/benchmarking.rb:69:in `perform_action_without_rescue' /usr/lib64/ruby/gems/1.8/gems/actionpack-1.12.3/lib/action_controller/rescue.rb:82:in `perform_action' /usr/lib64/ruby/gems/1.8/gems/actionpack-1.12.3/lib/action_controller/base.rb:381:in `process_without_filters' /usr/lib64/ruby/gems/1.8/gems/actionpack-1.12.3/lib/action_controller/filters.rb:377:in `process_without_session_management_support' /usr/lib64/ruby/gems/1.8/gems/actionpack-1.12.3/lib/action_controller/session_management.rb:117:in `process' /usr/lib64/ruby/gems/1.8/gems/rails-1.1.4/lib/dispatcher.rb:38:in `dispatch' /usr/lib64/ruby/gems/1.8/gems/rails-1.1.4/lib/fcgi_handler.rb:150:in `process_request' /usr/lib64/ruby/gems/1.8/gems/rails-1.1.4/lib/fcgi_handler.rb:54:in `process!' /usr/lib64/ruby/1.8/fcgi.rb:612:in `each_cgi' /usr/lib64/ruby/1.8/fcgi.rb:609:in `each_cgi' /usr/lib64/ruby/gems/1.8/gems/rails-1.1.4/lib/fcgi_handler.rb:53:in `process!' /usr/lib64/ruby/gems/1.8/gems/rails-1.1.4/lib/fcgi_handler.rb:23:in `process!' /srv/www/opensuse/webclient/current/public/dispatch.fcgi:24 Ciao -- http://www.dstoecker.eu/ (PGP key available) --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-buildservice+help(a)opensuse.org

2 1

[opensuse-buildservice] Cannot use `build` tool to build openssh-4.4p1-24 rpm on SuSE10.2
by Hung Lin 12 Mar '07

12 Mar '07

Hi, I tried to create openssh-4.4p1-24 rpm on SuSE10.2 machine. I used the `build` tool and here's the command I ran: test124:~/suse_build/openssh-4.4p1-24 # build --rpms /mnt/10.2/ openssh.spec logging output to /var/tmp/build-root/.build.log... test124 started "build openssh.spec" at Mon Mar 12 12:11:47 EDT 2007. Using BUILD_ROOT=/var/tmp/build-root Using BUILD_RPMS=/mnt/10.2/ Using BUILD_ARCH=i586:i486:i386 processing specfile /root/suse_build/openssh-4.4p1-24/openssh.spec... init_buildsystem openssh.spec ... expanding package dependencies... expansion error have choice for syslog needed by openct: syslogd syslog-ng It seems it cannot resolve the dependencies of the required rpms. The thing I don't understand is that I removed all packages in "usedforbuild" line and ran the same command again, it still showed the same error messages. I tried to use `build` tool to build hello-2.1.1-343 and it works fine. Thank you very much for your time. Hung Lin Software Engineer NexTone Communications, Inc. -- Network Without Limits -- --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-buildservice+help(a)opensuse.org

2 1

[opensuse-buildservice] How to install the Build Service on a local server?
by Jochen Hebbrecht 09 Mar '07

09 Mar '07

Hello, I'm searching for some information to install the Build Service on a local server. We want to do some tests with it, as we're planning to use it as our own buildtool. I have found the source code, but not a way to install it. According to kblin: [08:55] <kblin> yes, there should be instructions for that on the wiki somewhere Unfortunately, I can't find that specific Wiki page ... :-( ... Also Google doesn't provide me extra information. Can somebody give me a tip where to find the information to install it? --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-buildservice+help(a)opensuse.org

4 6

[opensuse-buildservice] WebClient: Blocked state - show blocking packages
by Pavol Rusnak 09 Mar '07

09 Mar '07

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hello! Is it possible to extend Blocked state in Project Status Monitor so it also shows which packages are blocking the build? Adding title to link should be sufficient, i.e. changing this: <td id="pkg:repo:arch" class="status_blocked"> <a href="/package/live_build_log?...">blocked</a> </td> into this: <td id="pkg:repo:arch" class="status_blocked"> <a href="/package/live_build_log?..." title="blocked by pkg1, pkg2">blocked</a> </td> - -- Best Regards / S pozdravom, Pavol RUSNAK SUSE LINUX, s.r.o Package Maintainer Lihovarska 1060/12 PGP 0xA6917144 19000 Praha 9, CR prusnak[at]suse.cz http://www.suse.cz -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.6 (GNU/Linux) Comment: Using GnuPG with SUSE - http://enigmail.mozdev.org iD8DBQFF7Ue5ASE5C6aRcUQRAnuKAKDKTs8iUuOBEsbc0H4CjkdhAg4fmwCeKte+ 3lUdWa44MgMbtqOmEHYPGBU= =EnIl -----END PGP SIGNATURE----- --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-buildservice+help(a)opensuse.org

3 4

[opensuse-buildservice] many random build failures in BuildService
by Stanislav Brabec 09 Mar '07

09 Mar '07

Hallo. Reviewing BuildService fail logs, I see about 5% of builds ending by random false failure. Triggering them to rebuild causes another failures in dependent packages and so on, so the rebuild cycle increases to several days and lot of manual triggering. For detail see: http://build.opensuse.org/project/monitor?project=GNOME%3AUNSTABLE All uni-arch failures are false ones. I see following failure types: http://build.opensuse.org/package/live_build_log?repository=openSUSE_10.2&a… Everything builds correctly (including final "exit 0") but status is set to "failed". http://build.opensuse.org/package/live_build_log?repository=openSUSE_10.2&a… reordering...done Error: Device 769 (vbd) could not be connected. Hotplug scripts not working. Using config file "/var/run/bsworker_4/build/xen.conf". http://build.opensuse.org/package/live_build_log?repository=openSUSE_10.2&a… build on build07/5 did not create a logfile -- Best Regards / S pozdravem, Stanislav Brabec software developer --------------------------------------------------------------------- SUSE LINUX, s. r. o. e-mail: sbrabec(a)suse.cz Lihovarská 1060/12 tel: +420 284 028 966 190 00 Praha 9 fax: +420 284 028 951 Czech Republic http://www.suse.cz/ --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-buildservice+help(a)opensuse.org

1 0

[opensuse-buildservice] openSUSE download redirector wiki page
by Christoph Thiel 09 Mar '07

09 Mar '07

Hey everyone, FYI: To gather all the information on the openSUSE download redirector framework, I'v just started http://en.opensuse.org/Build_Service/Redirector Best, Christoph -- Christoph Thiel, Tech. Project Management, Research & Development SUSE LINUX Products GmbH, GF: Markus Rex, HRB 16746 (AG Nürnberg) --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-buildservice+help(a)opensuse.org

1 0

[opensuse-buildservice] broken selections in kate,kwrite, quanta and perhaps more
by Jacob Caudill 09 Mar '07

09 Mar '07

I am running the latest kde packages from the build server as of march 8th. not sure which package is responsible, but in kate, kwrite, quanta, and perhaps others, selections are not behaving as they should. this can be seen by opening a text file, clicking anywhere in the file then holding shift and clicking anywhere else. also when you double/triple click before, after, or in a space of a line of text, it jumps to the start of the file instead of selecting the line. i just talked with the kdedevs and they seem to think its a problem with the suse packages OR the issue has already been fixed in the svn because they could not reproduce the bug Yaloki also tested this and saw the same behavior -- keep up the good work, Jacob Caudill Jake(a)SupportOSS.org www.SpinInk.net --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-buildservice+help(a)opensuse.org

2 1

[opensuse-buildservice] How is a buildenvironment defined?
by Jochen Hebbrecht 08 Mar '07

08 Mar '07

Is there a site/place where I can see what a minimal Suse 10.2 for example contains? And what if I want Perl 5.8.7 on it? How can I define that? Doing it in the .spec file? Buildrequires perl = 5.8.7 Is it already in the buildenvironment then? (before the actual build gets started) Or is RPM installing it for you? And what if Perl 5.8.7 doesn't exist? The build gets failed? --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-buildservice+help(a)opensuse.org

8 14