Hi Group,
I'm new to package and the OBS so am working through the tutorial. I
might be dim but it took me a while to work this out:
Step one and two relate to the package page of the web client.... For
step three you need to go back to the user's OBS home page!
I'm not sure what the convetion is for these changes.... in the
meantime I've edited step three of the tutorial.
http://en.opensuse.org/Build_Service/Tutorial#Step_Three_-_Add_Repositories
HTH?
Mark
---------------------------------------------------------------------
To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org
For additional commands, e-mail: opensuse-buildservice+help(a)opensuse.org
I noticed that if an OBS package has an _aggregate file AND a normal
spec file, then the spec file is ignored.
Any reason why you can't do a normal build and an _aggregate link
together at the same time in the same package?
This would seem like a logical thing to do when your goal is simply to
aggregate the "normal" RPM's requirements into your project, so your
repository is transitively closed.
-Archie
--
Archie L. Cobbs
---------------------------------------------------------------------
To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org
For additional commands, e-mail: opensuse-buildservice+help(a)opensuse.org
Hi,
repoview not listed on
Filename: repositories/openSUSE:/Tools/SLE_10/openSUSE:Tools.repo
Client IP address: 213.146.121.138
Found 8 mirrors: 3 country, 2 region, 2 elsewhere
Mirrors in the same country (DE):
http://widehat.opensuse.org/repositories/openSUSE:/Tools/SLE_10/openSUSE:To… (score 100)
http://ftp5.gwdg.de/pub/opensuse/repositories/openSUSE:/Tools/SLE_10/openSU… (score 100)
Kind regards
Chris
---------------------------------------------------------------------
To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org
For additional commands, e-mail: opensuse-buildservice+help(a)opensuse.org
Hi
I use OBS web interface to build csharp-obexftp rpm, with obexftp
0.22, i build all distro with success, now with the new obexftp
release, 0.23, i just change the version number and rpm date/coment in
the spec file, all are build with success expect for all Suse distro.
I had try to google the problem and most often time, it is a corupted
rpm problem (requist) or phyton devel pckg, or gcc problem.
Something has changing in Suse VM images ?
The full output of the build is here :
http://monoport.com/29647
For user who have a OBS account, project is here :
https://build.opensuse.org/package/show?package=csharp-obexftp&project=home…
On the project page we see all 0.23 success and 0.22 success with fail for 0.23.
Any help or answer is really welcome, thank's
--
Cordially.
Small Eric Quotations of the days:
---------------------------------------------------------------------------
If one day one reproaches you that your work is not a work of
professional, say you that:
Amateurs built the arch of Noah, and professionals the Titanic.
---------------------------------------------------------------------------
Few people are done for independence, it is the privilege of the powerful ones.
---------------------------------------------------------------------------
No key was wounded during the drafting of this message.
---------------------------------------------------------------------
To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org
For additional commands, e-mail: opensuse-buildservice+help(a)opensuse.org
Hello list,
I installed the following RPM offered on the BuildService:
- kdesvn-0.14.1-8.1.x86_64.rpm
- kdesvn-kiosvn-0.14.1-8.1.x86_64.rpm
Unfortunately, this version of kdesvn is broken and crashes with a
SIGSEGV when you try and access a working copy created with the svn
1.5.0 client with it.
According to the kdesvn author, this problem has been fixed in kdesvn
0.14.4. To quote him:
> In latest version of kdesvn (0.14.4) this problem is fixed (misuse of
> subversion lib) but I didn't build it for opensuse this moment.
Could you please consider building new RPMs for version 0.14.4 ?
(I'm interested in x86_64 builds for OpenSuSE 10.3, if this matters).
TIA
Cheers. Bye.
Ph. A.
--
*Philippe Andersson*
Unix System Administrator
IBA Particle Therapy |
Tel: +32-10-475.983
Fax: +32-10-487.707
eMail: pan(a)iba-group.com
<http://www.iba-worldwide.com>
The contents of this e-mail message and any attachments are intended solely for
the recipient (s) named above. This communication is intended to be and to
remain confidential and may be protected by intellectual property rights. Any
use of the information contained herein (including but not limited to, total or
partial reproduction, communication or distribution of any form) by persons
other than the designated recipient(s) is prohibited. Please notify the sender
immediately by e-mail if you have received this e-mail by mistake and delete
this e-mail from your system. E-mail transmission cannot be guaranteed to be
secure or error-free. Ion Beam Applications does not accept liability for any
such errors. Thank you for your cooperation.
Hi,
when I try to do a fresh install of obs 1.0, I get the following error:
#### YaST2 conflicts list - generated 2008-06-28 03:49:31 ####
obs-server-1.0.0-4.1.noarch[20080628-031724] kann aufgrund fehlender Abh344ngigkeiten nicht installiert werden
Es sind keine installierbaren Anbieter von repoview verf374gbar f374r
obs-server-1.0.0-4.1.noarch[20080628-031724]
Konfliktl366sung:
( ) obs-server nicht installieren
( ) Anforderung wird hier ignoriert
#### YaST2 conflicts list END ###
I have all repos integrated as described in
http://en.opensuse.org/Build_Service/Build_Service_Installation_Tutorial/SL…
Where to get the missing package repoview?
--
With best regards,
Carsten Hoeger
Hi all,
I've linked a package (tomboy) from the openSuSE 11:0 project, in order
to try building it with a patch that may fix a bug I entered in
bugzilla. I was clicking on the package flags to disable the SLE_10
build of my package (only testing with openSuSE 11.0 for this package),
and I accidentally clicked in the wrong place. What I wanted was
everything in the table to be default, except "SLE_10/All Arch." which
would be disabled. When I try and change anything there now I get the
message
ERROR: Your flag configuration seems to be too complex to be saved
through this interface. Please use OSC.
However, I can't find any information on how to use OSC to fix these
flags. Can anyone help out?
Cheers,
KEv.
--
Kevin James
Applied Technology Senior Strategist
Novell Global Enablement
------------------------
Novell, Inc.
http://www.novell.com
---------------------------------------------------------------------
To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org
For additional commands, e-mail: opensuse-buildservice+help(a)opensuse.org
Hi,
can not import src package.
admin@atlas:~/MyObs/SIT:perl> osc importsrcpkg
/srv/ftp/pub/sles10/extras/rpm/src/perl-IO-Socket-INET6-2.51-1.SIT.src.rpm
warning: rpmts_HdrFromFdno: Header V3 DSA signature: NOKEY, key ID 55f4b686
Traceback (most recent call last):
File "/usr/bin/osc", line 12, in <module>
r = babysitter.run(osccli)
File "/usr/lib/python2.5/site-packages/osc/babysitter.py", line 33, in run
return prg.main()
File "/usr/lib/python2.5/site-packages/osc/cmdln.py", line 256, in main
return self.cmd(args)
File "/usr/lib/python2.5/site-packages/osc/cmdln.py", line 279, in cmd
retval = self.onecmd(argv)
File "/usr/lib/python2.5/site-packages/osc/cmdln.py", line 395, in onecmd
return self._dispatch_cmd(handler, argv)
File "/usr/lib/python2.5/site-packages/osc/cmdln.py", line 1070, in
_dispatch_cmd
return handler(argv[0], opts, *args)
File "/usr/lib/python2.5/site-packages/osc/commandline.py", line 2057,
in do_importsrcpkg
rpm_data = data_from_rpm(srpm, 'Name:', 'Summary:', '%description')
File "/usr/lib/python2.5/site-packages/osc/core.py", line 3089, in
data_from_rpm
header = ts.hdrFromFdno(file.fileno())
_rpm.error: public key not available
where should this public key be placed ?
Thanks
Chris
---------------------------------------------------------------------
To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org
For additional commands, e-mail: opensuse-buildservice+help(a)opensuse.org