- openSUSE Support

Leap 15.2 jupyter-qtconsole is not working
by michael.kasimir＠gmx.de 25 Jun '21

25 Jun '21

Hi all, today I tried to start jupyter-qtconsole on my system but it could not be launched. Package version python-qtconsole-4.7.4-lp152.1.1.src.rpm If I run it in the terminal the following errormessages are occuring: $ jupyter-qtconsole Kind regards Michael Be Free, Be Linux

1 0

Sound Problem after Tumbleweed update
by Go Slowly Turtle 23 Jun '21

23 Jun '21

Can someone help me to diagnose a problem with sound on my laptop? My system (after update) is:- Operating System: openSUSE Tumbleweed 20210620 KDE Plasma Version: 5.22.1 KDE Frameworks Version: 5.83.0 Qt Version: 5.15.2 Kernel Version: 5.12.10-1-default (64-bit) Graphics Platform: Wayland Processors: 4 × Intel® Core™ i7-7500U CPU @ 2.70GHz Memory: 15.5 GiB of RAM Graphics Processor: Mesa DRI Intel® HD Graphics 620 The problem is that when I play music (through VLC media player or audacity) everything is fine until I plug in earphones. When the earphones connect, there is only silence. The 'phones worked fine until a recent update. PulseAudio Control (Volume Control), shows output and under 'Output Devices' tab when I switch from headphones to speakers, I hear music. Back to headphones, silence. I ran alsa-info.sh when playing through speakers, then connected the headphones and ran alsa-info.sh again. ************** Output: 6c6 < !!Script ran on: Wed Jun 23 15:40:01 UTC 2021 --- > !!Script ran on: Wed Jun 23 15:42:05 UTC 2021 403c403 < Amp-Out vals: [0x4e 0x4e] --- > Amp-Out vals: [0x00 0x00] 416c416 < Amp-Out vals: [0x00 0x00] --- > Amp-Out vals: [0x57 0x57] 513c513 < Amp-Out vals: [0x00 0x00] --- > Amp-Out vals: [0x80 0x80] 593c593 < Pin-ctls: 0x20: IN VREF_HIZ --- > Pin-ctls: 0x21: IN VREF_50 642c642 < Amp-Out vals: [0x80 0x80] --- > Amp-Out vals: [0x00 0x00] 648c648 < Pin-ctls: 0xc0: OUT HP --- > Pin-ctls: 0x00: 767c767 < crw-rw----+ 1 root audio 116, 2 Jun 23 11:39 /dev/snd/pcmC0D0p --- > crw-rw----+ 1 root audio 116, 2 Jun 23 11:41 /dev/snd/pcmC0D0p 829c829 < Mono: Playback 78 [90%] [-6.75dB] [on] --- > Mono: Playback 87 [100%] [0.00dB] [on] 835,836c835,836 < Front Left: Playback 0 [0%] [-65.25dB] [off] < Front Right: Playback 0 [0%] [-65.25dB] [off] --- > Front Left: Playback 87 [100%] [0.00dB] [on] > Front Right: Playback 87 [100%] [0.00dB] [on] 854,855c854,855 < Front Left: Playback 87 [100%] [0.00dB] [on] < Front Right: Playback 87 [100%] [0.00dB] [on] --- > Front Left: Playback 0 [0%] [-65.25dB] [off] > Front Right: Playback 0 [0%] [-65.25dB] [off] 937,938c937,938 < value.0 0 < value.1 0 --- > value.0 87 > value.1 87 946,947c946,947 < dbvalue.0 -6525 < dbvalue.1 -6525 --- > dbvalue.0 0 > dbvalue.1 0 953,954c953,954 < value.0 false < value.1 false --- > value.0 true > value.1 true 964,965c964,965 < value.0 87 < value.1 87 --- > value.0 0 > value.1 0 973,974c973,974 < dbvalue.0 0 < dbvalue.1 0 --- > dbvalue.0 -6525 > dbvalue.1 -6525 980,981c980,981 < value.0 true < value.1 true --- > value.0 false > value.1 false 1105c1105 < value 78 --- > value 87 1113c1113 < dbvalue.0 -675 --- > dbvalue.0 0 1139c1139 < value false --- > value true ********************* It seems that a number of values get set to zero on plugging in the headphones. Anyone have a way to fix the problem? -- \ ^ / 0 Turtle / v \ wame nuttauwadtuongash

1 0

meet.opensuse.org does not work
by Carlos E. R. 22 Jun '21

22 Jun '21

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 How do I report that https://meet.opensuse.org/ is not working for me? My camera doesn't work. It worked early March. The camera works fine on other tools, like vlc or WhatsApp. Same issue with https://meet.jit.si/. I don't see a contact link in any of the two. - -- Cheers Carlos E. R. (from 15.1 x86_64 at Telcontar) -----BEGIN PGP SIGNATURE----- iHoEARECADoWIQQZEb51mJKK1KpcU/W1MxgcbY1H1QUCYIHa3hwccm9iaW4ubGlz dGFzQHRlbGVmb25pY2EubmV0AAoJELUzGBxtjUfV+DoAn36+4ToqGmcLLKBayRVc p1MxVJCRAJ4n3qbS8+KOcMKqySQL7mnFmp1ejA== =eQu5 -----END PGP SIGNATURE-----

5 12

KMail broken since Plasma 5.22/framework 5.83
by Axel Braun 21 Jun '21

21 Jun '21

Hi This is more a heads-up resp. request for confirmation: Since one of the latest TW updates - I guess to Plasma 5.22 - KMail does not display all mails anymore: - It shows 25 unread mails, but I find only 8 marked as unread (although 25 is correct) - it does not show a single mail from yesterday (where the PC was off) - akonadictl fsck/vacuum did not fix it - neither did restarting everything Anyone experiencing the same issue? Cheers Axel

3 3

Tumbleweed - mtp problems
by mh＠mike.franken.de 20 Jun '21

20 Jun '21

Hi *, when connecting my Samsung S9 via USB-C to my DELL XPS13 notebook, it doesn't show up in the removable devices applet. Instead the applet tells me "no removable devices". Opening dolphin, the smartphone is shown in the devices section, though. From there I can open the folders on either the internal storage or the additional card and also access pictures taken by the smartphone camera below the DCIM folder. But I can't - manage the device via the removable devices applet, - test or configure the smartphone camera in the "digital camera" settings in systemsettings (I get messages like "can't claim USB device" when I try it), Enable autmatic mounting of removable media ist off in system settings. I also uninstalled all gvfs packages, because I suspected them to be the culprit. I am sure, this all worked at least up to last October. I am not sure, when it stopped working - I use this feature only when I'm on vacation. Actually the latest Tumbleweed snapshot is installed on this notebook. Any idea? TIA. Bye. Michael.

1 0

Chronyc not resyncs after the system resumes
by Marco Calistri 20 Jun '21

20 Jun '21

Hello, I face a little boring issue with my chronyc: Whenever I resume my system after it went in stand-by, it misses the synchronization with the NTP sources: chronyc sources MS Name/IP address Stratum Poll Reach LastRx Last sample =============================================================================== ^? 162.159.200.123 0 6 0 - +0ns[ +0ns] +/- 0ns ^? ntp27.kashra-server.com 0 6 0 - +0ns[ +0ns] +/- 0ns ^? ec2-52-67-171-238.sa-eas> 0 6 0 - +0ns[ +0ns] +/- 0ns ^? a.ntp.br 0 6 0 - +0ns[ +0ns] +/- 0ns ^? c.ntp.br 0 6 0 - +0ns[ +0ns] +/- 0ns ^? Time100.Stupi.SE 0 6 0 - +0ns[ +0ns] +/- 0ns then I need to force it to sync again: sudo chronyc burst 4/4; sudo chronyc makestep [sudo] password di root: 200 OK 200 OK chronyc sources MS Name/IP address Stratum Poll Reach LastRx Last sample =============================================================================== ^? 162.159.200.1 0 6 0 - +0ns[ +0ns] +/- 0ns ^- ntp27.kashra-server.com 2 6 0 203 +8663us[+8663us] +/- 158ms ^- ec2-52-67-171-238.sa-eas> 3 6 0 204 +8338us[+8338us] +/- 248ms ^* a.ntp.br 2 6 0 205 +267us[-3618us] +/- 9661us ^- c.ntp.br 2 6 0 204 -4523us[-4523us] +/- 31ms ^- Time100.Stupi.SE Are there any additional parameters I need to set into the chronyc configuration file in order to avoid to force syncing manually? Thanks and regards, -- Marco Calistri Build: openSUSE Tumbleweed 20210618 Kernel:5.12.10-1-default Desktop: XFCE (4.16.0)

1 0

dracut build fails installing pci_stub [Solved?]
by J Leslie Turriff 19 Jun '21

19 Jun '21

I recently added an nVidia geForce 2060 RTX card for . Afterwards, I decided to dedicate it to a Windows virtual machine, so I wanted to disable the nVidia drivers and switch to the vfio-pci driver, as described in "VGA PCI Passthrough guide on openSuSE Leap 42-2" (https://forums.opensuse.org/showthread.php/522015-VGA-PCI-Passthrough-guide…) Now when I try to rebuild my boot-loader with | dracut --force /boot/initrd 5.3.18-lp152.75-default the build fails with | dracut-install: ERROR: installing 'pci_stub' | dracut: FAILED: /usr/lib/dracut/dracut-install -D /var/tmp/dracut.2XbEWb/initramfs -N i2o_scsi| nvidia|nvidia_drm|nvidia-modeset| nvidia-uvm --kerneldir /lib/modules/5.3.18-lp152.75-default/ -m pci_stub vfio vfio_iommu_type1 vfio_pci vfio_virqfd kvm vm_intel and I'm not sure what to do to recover from this. And I forgot to add this link to the log output: https://paste.opensuse.org/3218884 And then I found this, which might be the solution, though it says it's for Tumbleweed: https://www.reddit.com/r/VFIO/comments/cigpb5/dracut_broke_my_passthrough/ Leslie -- openSUSE Leap 15.2 x86_64

2 1

korganizer and google calendar
by Ronald Edmister 19 Jun '21

19 Jun '21

I have been attempting to link my kontact software with a google calendar acct. and i make it through the user name but then instead of coming back for a password entry it gives me an error of 'couldn't sign you in - this browser or app may not be secure' This is on a dell laptop with a fresh install of opensuse 15.3

1 0

dracut build fails installing pci_stub
by J Leslie Turriff 19 Jun '21

19 Jun '21

I recently added an nVidia geForce 2060 RTX card for . Afterwards, I decided to dedicate it to a Windows virtual machine, so I wanted to disable the nVidia drivers and switch to the vfio-pci driver, as described in "VGA PCI Passthrough guide on openSuSE Leap 42-2" (https://forums.opensuse.org/showthread.php/522015-VGA-PCI-Passthrough-guide…) Now when I try to rebuild my boot-loader with | dracut --force /boot/initrd 5.3.18-lp152.75-default the build fails with | dracut-install: ERROR: installing 'pci_stub' | dracut: FAILED: /usr/lib/dracut/dracut-install -D /var/tmp/dracut.2XbEWb/initramfs -N i2o_scsi| nvidia|nvidia_drm|nvidia-modeset|nvidia-uvm --kerneldir /lib/modules/5.3.18-lp152.75-default/ -m pci_stub vfio vfio_iommu_type1 vfio_pci vfio_virqfd kvm vm_intel and I'm not sure what to do to recover from this. And I forgot to add this link to the log output: https://paste.opensuse.org/3218884 Leslie -- openSUSE Leap 15.2 x86_64

1 0

dracut build fails installing pci_stub
by J Leslie Turriff 19 Jun '21

19 Jun '21

I recently added an nVidia geForce 2060 RTX card for . Afterwards, I decided to dedicate it to a Windows virtual machine, so I wanted to disable the nVidia drivers and switch to the vfio-pci driver, as described in "VGA PCI Passthrough guide on openSuSE Leap 42-2" (https://forums.opensuse.org/showthread.php/522015-VGA-PCI-Passthrough-guide…) Now when I try to rebuild my boot-loader with | dracut --force /boot/initrd 5.3.18-lp152.75-default the build fails with | dracut-install: ERROR: installing 'pci_stub' | dracut: FAILED: /usr/lib/dracut/dracut-install -D /var/tmp/dracut.2XbEWb/initramfs -N i2o_scsi| nvidia|nvidia_drm|nvidia-modeset|nvidia-uvm --kerneldir /lib/modules/5.3.18-lp152.75-default/ -m pci_stub vfio vfio_iommu_type1 vfio_pci vfio_virqfd kvm vm_intel and I'm not sure what to do to recover from this. Leslie -- openSUSE Leap 15.2 x86_64

1 0