- openSUSE Support

Please Help for debug coredump after latest zypper dup
by Marco Calistri 24 Mar '22

24 Mar '22

Hello, What can be the cause for coredump of the wsjtx program after latest TW zypper dup? Follows the gdb output: Starting program: /home/marco/WSJT-X_build/.wsjtx/bin/wsjtx [Thread debugging using libthread_db enabled] Using host libthread_db library "/lib64/libthread_db.so.1". [New Thread 0x7ffff1fb4640 (LWP 4431)] [New Thread 0x7ffff1504640 (LWP 4432)] [New Thread 0x7ffff0cfc640 (LWP 4439)] Thread 1 "wsjtx" received signal SIGSEGV, Segmentation fault. 0x00007ffff5b96849 in malloc_consolidate (av=av@entry=0x7ffff5cfeaa0 <main_arena>) at malloc.c:4715 4715 { Many thanks! -- Marco Calistri Build: openSUSE Tumbleweed 20220317 Kernel:5.16.14-1-default Desktop: XFCE (4.16.0)

2 4

Do you see that YAST is not working?
by Marco Calistri 23 Mar '22

23 Mar '22

As per the subject! Yast not working here after latest updates. -- Marco Calistri Build: openSUSE Tumbleweed 20220317 Kernel:5.16.14-1-default Desktop: XFCE (4.16.0)

5 10

Setting up /var/tmp as a partition fails with error 32. Not understanding the issue.
by Stakanov 23 Mar '22

23 Mar '22

The disc is an SSD with the first partition raid used as /root. The rest of the disc is free. So I wanted: /var/tmp 100 GB /tmp 50 GB /swap rest of the disc (here 64 GB). Now, this should be easy. I attributed EXT4 ordered and noatimes. No problem to create /tmp and swap. But I get an error message for /var/tmp and I do not understand why: command '/bin/mount -t ext4 -o 'data=ordered,noatimes' '/dev/sdd2' '/var/tmp'' failed: stderr: mount: /var/tmp: wrong fs type, bad option, bad superblock on /dev/sdd2, missing codepage or helper program, or other error. exit code: 32 Why would this be the case? Would a RAID partiton restrict the number of primary partitions two two? (three in total?). NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINTS sda 8:0 0 232.9G 0 disk └─sda1 8:1 0 232.9G 0 part └─md127 9:127 0 232.9G 0 raid1 /srv /var /usr/local /root /opt /boot/grub2/x86_64-efi /boot/grub2/i386-pc /.snapshots / sdb 8:16 0 3.6T 0 disk └─sdb1 8:17 0 3.6T 0 part └─md0 9:0 0 3.6T 0 raid1 /home sdc 8:32 0 298.1G 0 disk ├─sdc1 8:33 0 1K 0 part └─sdc5 8:37 0 298.1G 0 part /boot/efi sdd 8:48 0 447.1G 0 disk ├─sdd1 8:49 0 232.9G 0 part │ └─md127 9:127 0 232.9G 0 raid1 /srv │ /var │ /usr/local │ /root │ /opt │ /boot/grub2/x86_64-efi │ /boot/grub2/i386-pc │ /.snapshots │ / ├─sdd2 8:50 0 100G 0 part ├─sdd3 8:51 0 50G 0 part /tmp └─sdd4 8:52 0 64.2G 0 part [SWAP] sde 8:64 0 3.6T 0 disk └─sde1 8:65 0 3.6T 0 part └─md0 9:0 0 3.6T 0 raid1 /home sdf 8:80 0 1.8T 0 disk └─sdf1 8:81 0 1.8T 0 part └─md126 9:126 0 1.8T 0 raid1 ├─md126p1 259:0 0 200G 0 part └─md126p2 259:1 0 1.6T 0 part /var/lib/libvirt sdg 8:96 0 1.8T 0 disk └─sdg1 8:97 0 1.8T 0 part └─md126 9:126 0 1.8T 0 raid1 ├─md126p1 259:0 0 200G 0 part └─md126p2 259:1 0 1.6T 0 part /var/lib/libvirt I am puzzled about the issue here. Thanks for helping me out.

1 1

Tumbleweed: lm-sensors installed and working, but fanspeed plasma object and other sensor object do not work
by Stakanov 22 Mar '22

22 Mar '22

lm-sensors and the setup including the new directory is installed and working. I had to reinstall my TW, before all worked error free. But now, no plasmoid seems to "see" the sensors. When I however go to CLI and do as normal user: entropy@silversurfer:~> sensors fam15h_power-pci-00c4 Adapter: PCI adapter power1: 60.33 W (crit = 95.06 W) amdgpu-pci-0300 Adapter: PCI adapter vddgfx: 6.00 mV fan1: 2300 RPM (min = 0 RPM, max = 5400 RPM) edge: +59.0°C (crit = +110.0°C, hyst = -273.1°C) (emerg = +115.0°C) junction: +60.0°C (crit = +105.0°C, hyst = -273.1°C) (emerg = +110.0°C) mem: +0.0°C (crit = +105.0°C, hyst = -273.1°C) (emerg = +110.0°C) slowPPT: 14.00 W (cap = 105.00 W) it8728-isa-0228 Adapter: ISA adapter in0: 1.20 V (min = +0.00 V, max = +3.06 V) in1: 1.49 V (min = +0.00 V, max = +3.06 V) in2: 2.02 V (min = +0.00 V, max = +3.06 V) in3: 1.97 V (min = +0.00 V, max = +3.06 V) in4: 1.96 V (min = +0.00 V, max = +3.06 V) in5: 660.00 mV (min = +0.00 V, max = +3.06 V) in6: 2.22 V (min = +0.00 V, max = +3.06 V) 3VSB: 3.29 V (min = +0.00 V, max = +6.12 V) Vbat: 3.14 V fan1: 992 RPM (min = 10 RPM) fan2: 1057 RPM (min = 0 RPM) fan3: 0 RPM (min = 0 RPM) fan4: 0 RPM (min = 0 RPM) fan5: 0 RPM (min = 0 RPM) temp1: +48.0°C (low = +127.0°C, high = +127.0°C) sensor = thermistor temp2: +50.0°C (low = +127.0°C, high = +127.0°C) sensor = thermal diode temp3: +27.0°C (low = +0.0°C, high = +90.0°C) sensor = Intel PECI intrusion0: ALARM k10temp-pci-00c3 Adapter: PCI adapter temp1: +27.4°C (high = +70.0°C) (crit = +80.0°C, hyst = +77.0°C) Three fans as expected (cpu and 2 PWR system ones) All sensors are there, but none is seen. Could this be a permissions issue? Any hint why the plasmoids do not have access to the existing values of lm- sensors? I have also reinstalled all sensor related plasmoid from the web again, but nothing, included reboot. Thankful for some clue about this. Again: ANY sensor is seen of the above in plasma.

2 2

Re: How do to get Windows back in the grub menu? [SOLVED]
by Freek de Kruijf 18 Mar '22

18 Mar '22

Op vrijdag 18 maart 2022 02:28:19 CET schreef u: > On Thu, Mar 17, 2022, 19:10 Freek de Kruijf <freek(a)opensuse.org> wrote: > > The situation is such that I can not boot any of the systems on the > > storage > > device. I can only boot from the USB device and I have access to that > > device, > > but I need an entry in the BIOS to boot from that device. > > > > The only option I see and will try, if there is no other way, is to > > (re)install Windows. Hopefully I can use a recover option of the Windows > > installation iso to get that entry in the BIOS. > > . > > I did not follow this thread in full, apologies if I am out of sync. > > If you enable EFI/UEFI in bios + secure boot - save + reboot and enter the > boot menu - bios might see you windows boot/recovery partition and allow > you boot from there. > > Hope that helps, > Tomas I tried all options in the BIOS to get back the Boot Option in the BIOS to boot from the storage device (SSD), but got none. As a last resort I am trying to install Windows 10 on the partition it was on. I do not do much with this OS, so it is not a big deal. I hope this also reinstates the entry in the BIOS to boot from the storage device. Fingers crossed. It all did not work, so I finally cleared the whole disk and installed Windows 10. After that I got an entry in the Boot Options to boot Windows. Now I am installing Tumbleweed and Leap 15.4 again. This succeeded. All in all the problem was caused by not having the USB stick with the iso file in the USB port, which did not show a Boot Option for USB in the BIOS with UEFI, only in the Legacy I found a USB entry, so I used that to install Leap 15.4. Trying to get Windows boot again I choose the BIOS configuration to reset to factory settings. -- fr.gr. member openSUSE Freek de Kruijf

2 2

openSUSE Leap 15.3 - here: diff-pdf-0.5-lp153.15.96.x86_64.rpm package not provided
by michael.kasimir＠gmx.de 18 Mar '22

18 Mar '22

Hello all, my system showed a necessary update for $ sudo zypper up The following package is going to be upgraded: diff-pdf 1 package to upgrade. *Continue? [y/n/v/...? shows all options] (y): *y not found] File './x86_64/diff-pdf-0.5-lp153.15.96.x86_64.rpm' not found on medium 'https:// download.opensuse.org/repositories/Publishing/openSUSE_Leap_15.3/' *Abort, retry, ignore? [a/r/i/...? shows all options] (a): *a Problem occurred during or after installation or removal of packages: Installation has been aborted as directed. Unfortunately I could not find this package diff-pdf-0.5-lp153.15.96.x86_64.rpm on openSUSE build. Does anybody know where to find it? Many greetings Michael Be Free, Be Linux

3 2

How do to get Windows back in the grub menu?
by Freek de Kruijf 17 Mar '22

17 Mar '22

I have a Dell laptop with Windows 10 and I installed Tumbleweed next to it and got a grub menu in which I could select which one to start. After installation of Leap 15.4 beta, next to Tumbleweed and Windows 10 I only got Leap 15.4 and Tumbleweed in the grub menu. I tried in both openSUSE systems to run "yast bootloader", but no Windows. I found a recipe to get other bootable systems in grub by running the command os-prober and update-grub, however os-prober does not show any sign of windows. So update-grub will not add Windows in the menu. How do I get Windows 10 back in grub? Also the Bios does not show an entry to boot Windows. -- fr.gr. member openSUSE Freek de Kruijf

5 7

Tumbleweed rescue upgrade: Product problem during update initialisation
by Peter Fodrek,ml.-súkromne 17 Mar '22

17 Mar '22

Dear openSUSE experts, I would like to rescue damaged tumbleweed instalation via upgrade from bootobale usb due to damaged are shim, glibc and rpm database at least. Chroot form SystemRecuseCD/SystemRecue is not possible to use After settings with only one popup window due to not popssible grub2 config read (error in script), there is everything ok. When upgrade is initialising it crashhed with no method path available in to remove product Tumblewwed 202105..in /mounts/imp001/usr/share/YaST2/lib/y2packager/resolvable.rb script on line 132. Maybe it is due to I was to used packager repository from openSuse build service repository in the past. Is there any solution to remove product from selection if trying to edit product list is not allowed in the installer,please? Something like moveing files from /etc/zypp/repos.d for packages will be helpfull to me, too. Or is there any other recomended solution,please? I look forward hearing from you Yours faithfully Peter Fodrek,j.r.

9 15

Newest version of Musescore for Leap 15.3
by Freek de Kruijf 16 Mar '22

16 Mar '22

Hi list, Is it possible to have the highest version of Musescore in Leap 15.3? I have a musescore file made with the highest version which does not load in Leap 15.3 with the provided version. -- fr.gr. member openSUSE Freek de Kruijf

4 4

[Leap 15.3] Reinstallation question
by Bob Williams 14 Mar '22

14 Mar '22

This machine has Leap 15.3 installed on a 250GB M2 NVME drive. This is very wasteful of space, and I'd like to repartition the drive and then reinstall Leap 15.3 in a smaller partition. I plan to use BTRFS with snapshotting enabled. I'm thinking 50GB would be ample. /home is on a separate rotating rust device. I'd like to get the system back to its current state as quickly as possible, so my work plan is: 1) Reinstall Leap 15.3 from appropriate media (I have a DVD), reformatting the M2 NVME drive at this stage. 2) Upgrade the new installation (I believe this happens concurrently during installation nowadays?) 3) Reinstall all my current applications. To do step 3) what do I need to copy from the current installation? something in /etc/zypp I believe? TIA Bob -- Bob Williams System: Linux 5.3.18-lp152.50-default Desktop: KDE Frameworks: 5.71.0, Qt: 5.12.7 and Plasma: 5.18.5 https://useplaintext.email/

5 12