- openSUSE Support

Re: Zypper rebuilding initrd for non-installed kernels after updates (Tumbleweed)
by Manfred Hollstein 10 Apr '22

10 Apr '22

Hi Rodney, On Sun, 10 Apr 2022, 14:36:03 +0200, Rodney Baker wrote: > I all. I've noticed that after doing a zypper dup on Tumbleweed, if a rebuild > of initrd is triggered by the update, it is rebuilding initrd for multiple > superseded kernel versions that are no longer installed. > > [I'm usually rebuilding the kernel after a kernel update because I have a > module that I need that is not yet included in the mainline kernel tree (I > have no idea of the status of that).] this is probably the reason... When you remove any distribution/update supplied kernel, do you also remove the out-of-line kernel's module of your own? Take a look at /lib/modules and get rid of all directories for which you don't have a kernel anymore. HTH, cheers. l8er manfred

1 0

Re: Leap-15.3 update: lib.so.6(GLIBC_2.34)(64bit) missing
by Ben T. Fender 09 Apr '22

09 Apr '22

Thank you, that was it, I had a Tumbleweed in there somehow 5 | multimedia_proaudio | Geekos DAW (openSUSE_Tumbleweed) | Yes | (r ) Yes | No | https://download.opensuse.org/repositories/multimedia:/proaudio/openSUSE_Tu… ..probably one of them susesoftware one-clicks that ask if you want the repo added. Dumped it, problem gone. Corollary, what are Leap users SUPPOSED to update with, Yast or zypper? I use Yast on Leap & zypper on TW. On Sat, 09 Apr 2022 01:42:25 +0200 dominique(a)leuenberger.net wrote: > On 2022-04-09 01:34, Ben T. Fender wrote: > > all of approximately one dozen conflicts revolve around > > a single > > > > "nothing provides 'lib.so.6(GLIBC_2.34)(64bit)' needed by..." > > > > just so it gets noticed > > That reeks of an invalid repo added to your system > > Leap does not have glibc 2.34 and anything linked against it does but > target leap. > > Check your trips (zypper lr -u) and ensure they are actually for leap > > Cheers, > Dominique

3 2

Leap-15.3 update: lib.so.6(GLIBC_2.34)(64bit) missing
by Ben T. Fender 08 Apr '22

08 Apr '22

all of approximately one dozen conflicts revolve around a single "nothing provides 'lib.so.6(GLIBC_2.34)(64bit)' needed by..." just so it gets noticed

1 0

apropos broken for everyone on 15.3?
by Felix Miata 08 Apr '22

08 Apr '22

# apropos label label: nothing appropriate. # apropos e2label e2label: nothing appropriate. # apropos kernel kernel: nothing appropriate. # apropos apropos apropos: nothing appropriate. # apropos mkfs mkfs: nothing appropriate. # apropos edit edit: nothing appropriate. # inxi -S System: Host: 00srv Kernel: 5.3.18-150300.59.60-default arch: x86_64 bits: 64 Console: pty pts/0 Distro: openSUSE Leap 15.3 It used to work. :( -- Evolution as taught in public schools is, like religion, based on faith, not based on science. Team OS/2 ** Reg. Linux User #211409 ** a11y rocks! Felix Miata

3 2

Re: [Leap 15.4] zypper dup fails
by Bob Williams 08 Apr '22

08 Apr '22

On Fri, 08 Apr 2022 10:20:43 +0200 Freek de Kruijf wrote: > Op vrijdag 8 april 2022 10:07:05 CEST schreef Bob Williams: > > I am running Leap 15.4 Beta. I have just tried to do a zypper dup, > > which failed due to > > > > error: unpacking of archive failed on file > > /usr/share/bash-completion/completions/nvme: cpio: File from package > > already exists as a directory in system error: > > nvme-cli-bash-completion-2.0~7-150400.1.2.x86_64: install failed > > error: nvme-cli-bash-completion-2.0~5-150400.1.2.x86_64: erase > > skipped ( 24/385) Installing: > > nvme-cli-bash-completion-2.0~7-150400.1.2.x86_64 > > ........................................................................... > > ................[error] Installation of > > nvme-cli-bash-completion-2.0~7-150400.1.2.x86_64 failed: Error: > > Subprocess failed. Error: RPM failed: Command exited with status 1. > > > > The running system is installed on an nvme partition, btrfs with > > snapshotting enabled. > > > > I accepted the abort option, but wonder what would happen if I'd > > chosen to ignore the error. Or is there another way to resolve this? > > > > Regards > > Bob > > > > -- > > Bob Williams > > Did have the same problem. Removed the packet > nvme-cli-bash-completion and installed it again, which went OK. > Many thanks, Freek, that worked perfectly. Regards Bob -- Bob Williams

1 0

[Leap 15.4] zypper dup fails
by Bob Williams 08 Apr '22

08 Apr '22

I am running Leap 15.4 Beta. I have just tried to do a zypper dup, which failed due to error: unpacking of archive failed on file /usr/share/bash-completion/completions/nvme: cpio: File from package already exists as a directory in system error: nvme-cli-bash-completion-2.0~7-150400.1.2.x86_64: install failed error: nvme-cli-bash-completion-2.0~5-150400.1.2.x86_64: erase skipped ( 24/385) Installing: nvme-cli-bash-completion-2.0~7-150400.1.2.x86_64 ...........................................................................................[error] Installation of nvme-cli-bash-completion-2.0~7-150400.1.2.x86_64 failed: Error: Subprocess failed. Error: RPM failed: Command exited with status 1. The running system is installed on an nvme partition, btrfs with snapshotting enabled. I accepted the abort option, but wonder what would happen if I'd chosen to ignore the error. Or is there another way to resolve this? Regards Bob -- Bob Williams

1 0

partclone missing support for exfat?
by Jason Wong 04 Apr '22

04 Apr '22

Hello I'm using openSUSE Leap 15.3 and have installed partclone 0.3.11-bp153.1.14. According to the documentation (man and readme) it supports exfat, however partclone.exfat does not exist. Not sure whether it is relevant but I had already installed the "exfat" stuff before installing partclone: i+ | exfatprogs | package | 1.0.4-3.3.1 i+ | fuse-exfat | package | 1.2.8-bp153.1.17 tia -- Jason Wong

4 4

[Leap 15.4] Virtualbox vboxconfig file missing
by Bob Williams 01 Apr '22

01 Apr '22

I'm using openSUSE Leap 15.4 Beta I have installed Virtualbox, added myself to the vboxusers group, and can start Virtualbox. It sees my VMs, but won't start them, telling me to run # /sbin/vboxconfig first. But this command is not found, and I can confirm that there is not a file called vboxconfig in /sbin Any suggestions, please? Bob -- Bob Williams

2 2

Problems with websites not reachable
by Freek de Kruijf 26 Mar '22

26 Mar '22

Most likely, since one of the last upgrades of Tumbleweed, I am having problems connecting with several websites. All opensuse.org websites {forums,downloads,www}, to mention a number are unreachable. They give a timeout in Firefox. When I try to connect from my telephone with Firefox to one of these sites, I get a connection. Also when I use Leap 15.3 the connection gets established. I can connect to other websites, but also other websites are unreachable. Anyone else having this problem? Could it be an IPv6 problem? -- fr.gr. member openSUSE Freek de Kruijf

5 12

Tumbleweed :Non possible recovery upgrade Was: Tumbleweed rescue upgrade: Product problem during update initialisation
by Peter Fodrek,ml.-súkromne 24 Mar '22

24 Mar '22

Dear SUSE experts, I have damaged Tumbleweed system with following mount (older karnel boots but crashees when loading init processs not to find /bin/sh or /bin/init) /dev/sdb1 mounted as /boot/efi /dev/sdb2 and /dev/sdb7 used as swap /dev/sdb3 mounted as / /dev/sdb4 mounted as /home /dev/sdb5 mounted as /boot /dev/sdb6 mounted as /var/log /dev/sdb8 mounted as /usr /dev/sdb19 mounted as /mnt/spolocny Upgrade crashes at initialization new install with not formatted partitions of original system crashes when downloading packages this can be mitigated by changing one of several "inter partition links" via using simple correcting cd /mnt/var/cache/zypp mv packages packagesOLD ln -s /mnt/home/packages . in terminal but then some packages do not install correctly. Most of incorrectly are docs and gettext *.mo files for applications but some are critical like grub, dracut, ruby, yast or zypper. After install there is not possible to upgrade due to sdb3 is listed as none system at boot even if it is correctly mounted in the terminal. Is there any possiblity to recover system or am I forced to format /dev/sdv3 at least and do clean install, yet Thank you for any help I look forward hearing from your Yours faithfully Peter

1 0