- openSUSE Support

[opensuse-support] Logout/Lock widget no longer works as it used to
by Ianseeks 12 Jun '20

12 Jun '20

Hi Since upgrade to tumbleweed:20200609, this widget is behaving completely different. I used to click the logout "button" and it would go straight into the logout process. Now it gives me a screen with choices of "Sleep Hibernate Restart Shutdown Log Out" with "Shutdown" on a 30 second timer as the default selection. Anyone know how i can get it back to the "old" way? I can't remember the name of its config file either, i remember having to edit it to stop the logout asking for confirmation. regards Ian -- opensuse:tumbleweed:20200609 Qt: 5.15.0 KDE Frameworks: 5.70.0 - KDE Plasma: 5.19.0 - kwin 5.19.0 kmail2 5.14.1 (20.04.0) - akonadiserver 5.14.1 (20.04.0) - Kernel: 5.6.14-1-default - xf86-video-nouveau: 1.0.16 -- To unsubscribe, e-mail: opensuse-support+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-support+owner(a)opensuse.org

2 7

[opensuse-support] Plasma5/kscreen losing primary resolution under Leap 15.1
by Daniel Morris 11 Jun '20

11 Jun '20

Can anyone suggest how to debug and lock my monitor configuration? I've recently bought a great AOC Q3279VWFD8 monitor to work from home (no prizes for guessing why), which can be driven at 2580x1440 @75Hz via DisplayPort from onboard Intel graphics (Core i5-2500K) with an H67M-GE/HT motherboard. Most time the monitor sleeps it wakes up at a lower resolution (typically 1920x1080, but 1024x768 for extra annoyance). Occasionally I can reconfigure it back up with System Settings -> Display & Monitor. Often I have to repeatedly trick it by powering the monitor off and on, and sometimes it can then be stepped back up to 2580x1440. Often it gets stuck at something like 1920x1080 @ 30Hz. Options are restarting Plasma or letting it go to sleep and reconfigure (not guaranteed). Looking in the journal I can find references to: kdeinit5[6968]: kscreen: Requesting missing EDID for outputs (66, 70) org_kde_powerdevil[7047]: kscreen: Requesting missing EDID for outputs (66, 70) systemsettings5[5381]: kscreen: Requesting missing EDID for outputs (66, 70) As an aside, I have a second monitor 1920x1080 to the right, via HDMI. According to the manual my motherboard will only support two outputs (of the four). The second monitor is only needed a few times a week when puzzling over accounts/spreadsheets. I've read around and the various conflicting advice and trails for multi-monitor & Plasma issues go back years. I'm at a bit of a loss to know which bit of behind the scenes magic is going wrong, as I haven't had to concern myself with this kind of setup since the CRT days! I suspect the monitor isn't replying in time with its capabilities. Here's the xrandr output (listing modes) from it working nicely: $ xrandr Screen 0: minimum 320 x 200, current 4664 x 1588, maximum 8192 x 8192 VGA-1 disconnected (normal left inverted right x axis y axis) HDMI-1 connected 1920x1080+2744+508 (normal left inverted right x axis y axis) 598mm x 336mm 1920x1080 60.00*+ 1680x1050 59.88 1280x1024 75.02 60.02 1440x900 59.90 1280x960 60.00 1280x800 59.91 1152x864 75.00 1280x720 60.00 1024x768 75.03 70.07 60.00 832x624 74.55 800x600 72.19 75.00 60.32 56.25 640x480 75.00 72.81 66.67 59.94 720x400 70.08 DP-1 disconnected (normal left inverted right x axis y axis) HDMI-2 disconnected (normal left inverted right x axis y axis) HDMI-3 disconnected (normal left inverted right x axis y axis) DP-2 connected primary 2560x1440+0+0 (normal left inverted right x axis y axis) 725mm x 428mm 2560x1440 59.95 + 74.97* 1920x1080 60.00 60.00 50.00 59.94 1920x1080i 60.00 50.00 59.94 1280x1440 59.91 1680x1050 59.95 1280x1024 75.02 60.02 1440x900 59.89 1280x960 60.00 1280x720 60.00 60.00 50.00 59.94 1024x768 75.03 70.07 60.00 832x624 74.55 800x600 72.19 75.00 60.32 56.25 720x576 50.00 50.00 50.00 720x480 60.00 60.00 59.94 59.94 59.94 640x480 75.00 72.81 66.67 60.00 59.94 59.94 720x400 70.08 2560x1440_74.97 74.89 DP-3 disconnected (normal left inverted right x axis y axis) And here's xrandr output when not working nicely: $ xrandr Screen 0: minimum 320 x 200, current 4664 x 1588, maximum 8192 x 8192 VGA-1 disconnected (normal left inverted right x axis y axis) HDMI-1 connected 1920x1080+2744+508 (normal left inverted right x axis y axis) 598mm x 336mm 1920x1080 60.00*+ 1680x1050 59.88 1280x1024 75.02 60.02 1440x900 59.90 1280x960 60.00 1280x800 59.91 1152x864 75.00 1280x720 60.00 1024x768 75.03 70.07 60.00 832x624 74.55 800x600 72.19 75.00 60.32 56.25 640x480 75.00 72.81 66.67 59.94 720x400 70.08 DP-1 disconnected (normal left inverted right x axis y axis) HDMI-2 disconnected (normal left inverted right x axis y axis) HDMI-3 disconnected (normal left inverted right x axis y axis) DP-2 connected primary 1920x1080+0+0 (normal left inverted right x axis y axis) 725mm x 428mm 1920x1080 60.00* 60.00 50.00 59.94 1920x1080i 60.00 50.00 59.94 1280x1440 59.91 1680x1050 59.95 1280x1024 75.02 60.02 1440x900 59.89 1280x960 60.00 1280x720 60.00 60.00 50.00 59.94 1024x768 75.03 70.07 60.00 832x624 74.55 800x600 72.19 75.00 60.32 56.25 720x576 50.00 50.00 50.00 720x480 60.00 60.00 59.94 59.94 59.94 640x480 75.00 72.81 66.67 60.00 59.94 59.94 720x400 70.08 DP-3 disconnected (normal left inverted right x axis y axis) Between it being bad I tried the following (having created a modeline from cvt when it was previously good - and modelines seem odd in the days of panels/non-CRT, but I haven't been paying attention): $ xrandr --newmode "2560x1440_74.97" 397.00 2560 2760 3040 3520 1440 1443 1448 1506 -hsync +vsync $ xrandr --addmode DP-2 2560x1440_74.97 $ xrandr --output DP-2 --mode 2560x1440_74.97 xrandr: Configure crtc 0 failed # put up with it to do some critical email # made a coffee & swapped a 3D print # powered monitor up and reset several times # switched on second monitor # mashed the keyboard/wiggled mouse/switched off and on again # jumped to VT1 and got prompt mirrored on both monitors # reconfigured successfully with System Settings -> Display & Monitor I'm expecting at least another 10 weeks of working from home, and this is getting really irritating. Help! Ta. Daniel -- To unsubscribe, e-mail: opensuse-support+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-support+owner(a)opensuse.org

4 9

[opensuse-support] when rosegarden 20.06 in TW?
by ksusup＠trixtar.org 07 Jun '20

07 Jun '20

Just curious, I'm using 19.06 with which I have the fewest problems but 20.06 is supposedly a huge bugfix and feature-expander ciao -- To unsubscribe, e-mail: opensuse-support+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-support+owner(a)opensuse.org

1 0

[opensuse-support] locate package containing missing file?
by Felix Miata 07 Jun '20

07 Jun '20

Plasma is missing window decorations since upgrade TW from 20200326 to 20200604: # journalctl -b | grep aile Jun 06 12:48:32 fi965 kernel: acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM Jun 06 16:48:49 fi965 systemd[1]: haveged.service: Failed with result 'exit-code'. Jun 06 16:49:22 fi965 nscd[838]: 838 stat failed for file `/etc/services'; will try again later: No such file or directory Jun 06 16:49:24 fi965 smartd[829]: Device: /dev/sdc [SAT], Failed SMART usage Attribute: 190 Airflow_Temperature_Cel. Jun 06 16:48:44 fi965 kwin_x11[1420]: kf5.kconfig.core: "\"fsrestore1\" - conversion of \"641,641,0,0\" to QRect failed" Jun 06 16:48:44 fi965 kwin_x11[1420]: kf5.kconfig.core: "\"fsrestore2\" - conversion of \"0,0,0,0\" to QRect failed" Jun 06 16:48:47 fi965 org_kde_powerdevil[1479]: powerdevil: org.kde.powerdevil.backlighthelper.brightness failed # cat .xsession-errors /etc/X11/xim: Checking whether an input method should be started. sourcing /etc/sysconfig/language to get the value of INPUT_METHOD INPUT_METHOD is not set or empty (no user selected input method). Trying to start a default input method for the locale en_US.UTF-8 ... There is no default input method for the current locale. Dummy input method "none" (do not use any fancy input method by default) xrdb: colon missing on line 1, ignoring line /home/user/.bashrc: line 6: warning: setlocale: LC_TIME: cannot change locale (en_DK.utf8): No such file or directory /home/user/.bash_profile: line 6: warning: setlocale: LC_TIME: cannot change locale (en_DK.utf8) gpg-connect-agent: no gpg-agent running in this session gpg-connect-agent: no gpg-agent running in this session dbus-update-activation-environment: warning: error sending to systemd: org.freedesktop.DBus.Error.InvalidArgs: Invalid environment assignments Could not open kded5 using a library: Cannot load library libkdeinit5_kded5: (libkdeinit5_kded5: cannot open shared object file: No such file or directory) xsettingsd: Loaded 0 settings from /home/user/.config/xsettingsd/xsettingsd.conf xsettingsd: Created window 0x1a00001 on screen 0 with timestamp 82263 xsettingsd: Selection _XSETTINGS_S0 is owned by 0x0 xsettingsd: Took ownership of selection _XSETTINGS_S0 xsettingsd: Reloading configuration xsettingsd: Loaded 10 settings from /home/user/.config/xsettingsd/xsettingsd.conf xsettingsd: Reloading configuration xsettingsd: Loaded 10 settings from /home/user/.config/xsettingsd/xsettingsd.conf xsettingsd: Reloading configuration xsettingsd: Loaded 10 settings from /home/user/.config/xsettingsd/xsettingsd.conf xsettingsd: Reloading configuration xsettingsd: Loaded 10 settings from /home/user/.config/xsettingsd/xsettingsd.conf xsettingsd: Reloading configuration xsettingsd: Loaded 0 settings from /home/user/.config/xsettingsd/xsettingsd.conf xsettingsd: Reloading configuration xsettingsd: Loaded 10 settings from /home/user/.config/xsettingsd/xsettingsd.conf xsettingsd: Reloading configuration xsettingsd: Loaded 10 settings from /home/user/.config/xsettingsd/xsettingsd.conf xsettingsd: Reloading configuration xsettingsd: Loaded 10 settings from /home/user/.config/xsettingsd/xsettingsd.conf # locate libkdeinit5_kded5 # which libkdeinit4_kded5 which: no libkdeinit4_kded5 in (/sbin:/usr/sbin:/usr/local/sbin:/root/bin:/usr/local/bin:/usr/bin:/bin:/opt/kde3/bin) # Like trying to prove a nullity, if a file is *missing*, how does one determine the path that's supposed to contain it, much less the name of the package that's supposed to provide it, so as to be able to try to get it installed (correctly)? -- Evolution as taught in public schools is religion, not science. Team OS/2 ** Reg. Linux User #211409 ** a11y rocks! Felix Miata *** http://fm.no-ip.com/ -- To unsubscribe, e-mail: opensuse-support+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-support+owner(a)opensuse.org

4 5

[opensuse-support] accessing download.opensuse.org via ipv6 does not work
by Hendrik Woltersdorf 02 Jun '20

02 Jun '20

Hi, I have problems updating my openSUSE Tumbleweed installation using zypper, because my dual stack system prefers ipv6 over ipv4 and access over ipv6 does not work: traceroute6 download.opensuse.org traceroute to download.opensuse.org (2620:113:80c0:8::13), 30 hops max, 80 byte packets 1 2003:c8:7f3b:6800:eadf:70ff:fe34:ac7a (2003:c8:7f3b:6800:eadf:70ff:fe34:ac7a) 0.859 ms 0.844 ms 0.796 ms 2 2003:0:8701:2800::1 (2003:0:8701:2800::1) 18.536 ms 18.673 ms 18.417 ms 3 2003:0:1304:802a::1 (2003:0:1304:802a::1) 27.225 ms 26.979 ms 26.760 ms 4 2003:0:1304:802a::2 (2003:0:1304:802a::2) 27.144 ms 26.949 ms 27.334 ms 5 ae2-2001.nbg30.core-backbone.com (2a01:4a0:0:2001::1) 30.033 ms 30.062 ms 29.797 ms 6 2a01:4a0:1338:f0::2 (2a01:4a0:1338:f0::2) 30.497 ms 30.017 ms 29.699 ms 7 * * * 8 * * * ... (no more answers) I can work around this problem by inserting the ipv4 address into /etc/hosts. Is anyone else seeing this issue? And who or what do I blame? Hendrik -- To unsubscribe, e-mail: opensuse-support+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-support+owner(a)opensuse.org

3 3

[opensuse-support] Fonts quality after update to libfreetype6 2.10 in Leap 15.1?
by Andrei Borzenkov 30 May '20

30 May '20

Anyone noticed the difference? There are forum posts and I was hit by this issue as well. To me it looks certainly worse and I was not able to get the same look with libfreetype6 2.10 and I had with 2.9. I attached two screenshots to https://bugzilla.opensuse.org/show_bug.cgi?id=1172148 of the same terminal content using two different library versions. If anyone has suggestion how to get the same result with 2.10 as I had with 2.9 I am grateful. I never configured anythjing explicitly, it is default Xfce installation without any customization. I do not actually know how to customize fonts (or, better said, I cannot predict what effect changing individual parameters would have). For now I locked libfreetype6, but with 15.2 not far away ... Interesting that I do not see the same effect in TW, so it could be something specific to Leap (may be some other libraries that do not work correctly with new libfreetype6). -- To unsubscribe, e-mail: opensuse-support+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-support+owner(a)opensuse.org

7 12

[opensuse-support] LANG=POSIX instead of wanted en_US.UTF-8
by Vojtěch Zeisek 27 May '20

27 May '20

Hello, on relatively simple minimal installation (small web server in VM) on Leap 15.1 I try to install GitLab, but it complains: Environment variable LANG specifies a non-UTF-8 locale. GitLab requires UTF-8 encoding to function properly. Please check your locale settings. So I checked settings: # locale LANG=POSIX LC_CTYPE=en_US.UTF-8 LC_NUMERIC="POSIX" LC_TIME="POSIX" LC_COLLATE="POSIX" LC_MONETARY="POSIX" LC_MESSAGES="POSIX" LC_PAPER="POSIX" LC_NAME="POSIX" LC_ADDRESS="POSIX" LC_TELEPHONE="POSIX" LC_MEASUREMENT="POSIX" LC_IDENTIFICATION="POSIX" LC_ALL= # localectl status System Locale: LANG=en_US.UTF-8 VC Keymap: us X11 Layout: n/a # cat /etc/locale.conf LANG=en_US.UTF-8 # echo $LANG POSIX I changed all LC_* variables to en_US.UTF-8 in YaST /etc/sysconfig Editor, so it seems to be correct in /etc/sysconfig/language but there is no change in the above outputs. Not even after reboot. ;-) It seems it helps if I manually export LANG='en_US.UTF-8', but this seems bit weird to me. I'd have to do such export after every boot. GitLab is the first application to complain, everything else works well, no problems with locales, encodings or so. But still, I wonder how to properly set locales to en_US.UTF-8...? I'd expect YaST to do the job. Yours, -- Vojtěch Zeisek https://trapa.cz/ Komunita openSUSE GNU/Linuxu Community of the openSUSE GNU/Linux https://www.opensuse.org/

2 4

Re: [External] Re: [opensuse-support] HONEYWELL : COTS : [urgent] : Information required on security-related patches under opensuse
by Marcus Meissner 26 May '20

26 May '20

On Tue, May 26, 2020 at 01:05:19PM +0000, Kumar, Dhanalakshmi wrote: > Hi Marcus , > > Could you please let us know the latest version of GNU compiler collection. The upstream GCC Project release is 10.1 On openSUSE Leap 15.1, SUSE Linux Enterprise 12 and 15 the latest is: gcc9 93.1 openSUSE Leap 15.1: https://lists.opensuse.org/opensuse-updates/2020-05/msg00151.html SUSE Linux Enterprise 15: http://lists.suse.com/pipermail/sle-updates/2020-May/014649.html SUSE Linux Enterprise 12: http://lists.suse.com/pipermail/sle-updates/2020-May/014747.html Ciao, Marcus > > > Thanks and Stay Secure, > Dhanalakshmi Kumar > Vulnerability Management > Tata Consultancy Services | Contracted to Honeywell > Desk: +91-6746778032 > Email: Dhanalakshmi.Kumar(a)Honeywell.com Disclaimer Notice Please do not email any confidential or privileged information that may violate export control rules as I'm NOT authorized to view Export Controlled Data. > > > > -----Original Message----- > From: Kumar, Dhanalakshmi > Sent: Tuesday, May 19, 2020 7:15 PM > To: Marcus Meissner <meissner(a)suse.de> > Cc: opensuse-support(a)opensuse.org; DL-INTVULMGMT <DL-INTVULMGMT(a)Honeywell.com>; B&FApps_VulnerabilityManagement <B&FApps_VulnerabilityManagement(a)Honeywell.com> > Subject: RE: [External] Re: [opensuse-support] HONEYWELL : COTS : [urgent] : Information required on security-related patches under opensuse > Importance: High > > Hi Marcus , > > Could you please let us know the latest version of GNU compiler collection. > > > > Thanks and Stay Secure, > Dhanalakshmi Kumar > Vulnerability Management > Tata Consultancy Services | Contracted to Honeywell > Desk: +91-6746778032 > Email: Dhanalakshmi.Kumar(a)Honeywell.com Disclaimer Notice Please do not email any confidential or privileged information that may violate export control rules as I'm NOT authorized to view Export Controlled Data. > > > > -----Original Message----- > From: Marcus Meissner <meissner(a)suse.de> > Sent: Tuesday, May 19, 2020 7:05 PM > To: Kumar, Dhanalakshmi <Dhanalakshmi.Kumar(a)Honeywell.com> > Cc: opensuse-support(a)opensuse.org; DL-INTVULMGMT <DL-INTVULMGMT(a)Honeywell.com>; B&FApps_VulnerabilityManagement <B&FApps_VulnerabilityManagement(a)Honeywell.com> > Subject: [External] Re: [opensuse-support] HONEYWELL : COTS : [urgent] : Information required on security-related patches under opensuse > > Hi, > > Not sure if you were really looking for openSUSE. > > openSUSE security patches are being mailed out via our opensuse-security-announce list: > > https://lists.opensuse.org/opensuse-security-announce/ > > For SUSE Linux Enterprise, our security landing page is at https://www.suse.com/support/security/ > and links to either mailing lists, webui form to see advisories, per-CVE pages, and also OVAL and CVRF datafeeds. > > Ciao, Marcus for SUSE Security > > On Tue, May 19, 2020 at 12:00:30PM +0000, Kumar, Dhanalakshmi wrote: > > Hi Team, > > > > We recognize your time is valuable so tell us the best way to learn about and obtain the latest security patches or software revisions/upgrades of your product : > > > > Option #1: On a monthly basis, Honeywell can send an email inquiring if new security patches are available. > > Option #2: Provide Honeywell with an annual release schedule and we will contact you upon each release date. > > Option #3: Notify Honeywell with the information related to the patch/version when such becomes available. > > Option #4: Suggest alternate methods that your company uses to inform customers about software patches or revisions. > > Option # 5: Provide us the website URL from where we can get the new version release information as well as release notes as a monthly basis. > > > > > > Your action :: > > > > * Please revert us with an option# > > > > * Please fill up the table with the latest information available > > > > > > > > Product Name > > > > Honeywell installed version > > > > Latest Market version in website > > > > Release Date of Latest Market version > > > > Website URL > > > > End Of Support of the Honeywell installed version GNU COMPILER > > COLLECTION > > GCC-9-1.6 > > ? > > > > ? > > > > ? > > > > ? > > > > > > We want to stay in touch to obtain new security patches or software revisions that Honeywell can implement accordingly. Keeping Honeywell systems secure and up to date are a major priority for the Honeywell Information Technology organization. > > > > If there is someone else in your company that we should contact, please inform us. > > > > We look forward to your response to the above options and if you have > > any questions, contact us by replying to this email or > > DL-INTVULMGMT(a)Honeywell.com<mailto:DL-INTVULMGMT@Honeywell.com> > -- Marcus Meissner,SUSE LINUX GmbH; Maxfeldstrasse 5; D-90409 Nuernberg; Zi. 3.1-33,+49-911-740 53-432,,serv=loki,mail=wotan,type=real <meissner(a)suse.de> -- To unsubscribe, e-mail: opensuse-support+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-support+owner(a)opensuse.org

1 0

[opensuse-support] Alcor Cardreader does not work
by Axel Braun 24 May '20

24 May '20

Hi, my laptop (runnung TW) is equipped with an Alcor cardreader: X1E:/home/docb # opensc-tool --list-readers # Detected readers (pcsc) Nr. Card Features Name 0 No Alcor Micro AU9560 00 00 journalctl lists when scanning for the device: systemd[1]: Started PC/SC Smart Card Daemon. pcscd[11070]: 00000000 ccid_usb.c:1264:ControlUSB() control failed (1/4): -7 LIBUSB_ERROR_TIMEOUT When inserting a card, it is not recognized: X1E:/home/docb # pcsc_scan Using reader plug'n play mechanism Scanning present readers... 0: Alcor Micro AU9560 00 00 Thu May 21 14:41:04 2020 Reader 0: Alcor Micro AU9560 00 00 Event number: 0 Card state: Card removed, (not detecting the inserted card) Journalctl: kernel: do_IRQ: 1.34 No irq handler for vector I found in the Arch wiki some hints that this may work: https://wiki.archlinux.org/index.php/Smartcards Is this a kernel configuration issue? Thanks Axel -- To unsubscribe, e-mail: opensuse-support+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-support+owner(a)opensuse.org

2 5

[opensuse-support] Opensuse mirrors in kazakhstan?
by Nikita Stepanov 22 May '20

22 May '20

-- To unsubscribe, e-mail: opensuse-support+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-support+owner(a)opensuse.org

3 2