March 2011 - openSUSE Build Service - openSUSE Mailing Lists

[opensuse-buildservice] openSUSE 10.3 runs out of maintenance
by Adrian Schröter 21 Feb '12

21 Feb '12

Hello, is usual, openeSUSE 10.3 runs out of maintenance and I will remove all repos building against it in OBS. openSUSE:10.3 project has been moved to DISCONTINUED: namespace as announced a while ago. bye adrian -- Adrian Schroeter SUSE Linux Products GmbH email: adrian(a)suse.de -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-buildservice+help(a)opensuse.org

2 2

[opensuse-buildservice] Installing on Mandriva via OBS repo
by Nicholas Peterson 20 Oct '11

20 Oct '11

Hi All, I am trying to install my program on Mandriva but can't seem to add the OBS repository. It seems that the command urpmi.addmedia doesn't work with the normal RPM PM. Someone on IRC mentioned that I could specify a different type for the repository in my OBS raw config to automatically generate a urpmi compatible repo. What do I put as the type for my Mandriva repo to make it urpmi compatible? Thanks, Nick -- Nick Peterson Programmer @ Siepel Lab Cell: (480) 600-2544 -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-buildservice+help(a)opensuse.org

7 31

Re: [opensuse-buildservice] compiler flags issue on openSUSE 11.2 (gcc4.4.1) and factory
by Di Pe 18 Oct '11

18 Oct '11

OK, did that but halts before it can finish the configure. Is there another way to access the logs? an alternative solution would be: ln -s /usr/include/et/com_err.h /usr/include/com_err.h that's how I got it to work on my own box. But I could not do that in the build service because I was getting permission denied errors. Thanks # # %configure # cat config.log # %{__make} %{?_smp_mflags} # # %install # #%{__rm} -rf %{buildroot} #not needed # %{__make} DESTDIR=%{buildroot} install # Using BUILD_ROOT=/abuild/root_8/.mount Using BUILD_ARCH=x86_64:i686:i586:i486:i386 Doing xen build in /dev/abuild/8_root build22 started "build msktutil.spec" at Fri Apr 16 22:36:06 UTC 2010. Building msktutil for project 'home:dipe' repository 'openSUSE_11.2' arch 'x86_64' srcmd5 'b92ec11f13803a767e9d68f94555f1b4' processing specfile /abuild/root_8/.build-srcdir/msktutil.spec ... running changelog2spec --target rpm --file /abuild/root_8/.build-srcdir/msktutil.spec init_buildsystem --cachedir /var/cache/build --prepare --clean --rpmlist /abuild/root_8/.build.rpmlist /abuild/root_8/.build-srcdir/msktutil.spec build rpmlint-Factory ... preinstalling aaa_base... preinstalling acl... preinstalling attr... preinstalling bash... preinstalling coreutils... preinstalling diffutils... preinstalling filesystem... preinstalling fillup... preinstalling glibc... preinstalling grep... preinstalling insserv... preinstalling libacl... preinstalling libattr... preinstalling libbz2-1... preinstalling libgcc44... preinstalling libxcrypt... preinstalling m4... preinstalling libncurses5... preinstalling pam... preinstalling permissions... preinstalling libreadline6... preinstalling rpm... preinstalling sed... preinstalling tar... preinstalling zlib... preinstalling libselinux1... preinstalling liblzma0... preinstalling libcap2... preinstalling libpcre0... preinstalling libpopt0... preinstalling libelf1... preinstalling liblua5_1... preinstalling util-linux... preinstalling perl-base... preinstalling libdb-4_5... preinstalling libsepol1... preinstalling libblkid1... preinstalling libuuid1... copying packages... reordering...done booting XEN kernel ... xm create -c /var/run/bsworker_8/build/xen.conf name=build:8_root memory=750 disk=phy:/dev/abuild/8_root,hda1,w disk=phy:/dev/abuild/8_swap,hda2,w extra=quiet init=/.build/build panic=1 console=ttyS0 Using config file "/var/run/bsworker_8/build/xen.conf". Started domain build:8_root PCI: Fatal: No config space access function found i8042.c: No controller found. doing fast boot FATAL: Module ext4 not found. Creating device nodes with udev Boot logging started on /dev/xvc0(/dev/console) at Fri Apr 16 22:36:29 2010 Waiting for device /dev/hda1 to appear: ok fsck 1.41.1 (01-Sep-2008) [/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a /dev/hda1 /dev/hda1: clean, 2561/1826816 files, 185686/7296000 blocks fsck succeeded. Mounting root device read-only. Mounting root /dev/hda1 mount -o ro,defaults -t ext3 /dev/hda1 /root mount: can't find /root/proc in /etc/fstab or /etc/mtab 2nd stage started in virtual machine machine type: x86_64 swapon on /dev/hda2 swapon: /dev/hda2: found swap v1 signature string for 4 KiB PAGE_SIZE swapon: /dev/hda2: pagesize=4096, swapsize=2097152000, devsize=2097152000 mount: none already mounted or //proc busy mount: according to mtab, none is already mounted on /proc logging output to //.build.log... processing specfile /.build-srcdir/msktutil.spec ... init_buildsystem --cachedir /var/cache/build --repository zypp:// /.build-srcdir/msktutil.spec build rpmlint-Factory ... running aaa_base preinstall script running aaa_base postinstall script Updating etc/sysconfig/language... Updating etc/sysconfig/backup... Updating etc/sysconfig/boot... Updating etc/sysconfig/kernel... Updating etc/sysconfig/suseconfig... Updating etc/sysconfig/clock... Updating etc/sysconfig/proxy... Updating etc/sysconfig/windowmanager... Updating etc/sysconfig/sysctl... Updating etc/sysconfig/cron... Updating etc/sysconfig/news... Updating etc/sysconfig/shutdown... Updating etc/passwd...unchanged Updating etc/group...unchanged Updating etc/shadow...new initializing rpm db... installing filesystem-11.2-12.2 installing pcre-7.9.0-2.3.1 installing terminfo-base-5.6-91.2 installing glibc-2.10.1-10.4 installing audit-libs-1.7.13-4.2 installing fillup-1.42-245.3 installing gdbm-1.8.3-373.7 installing glibc-locale-2.10.1-10.4 installing keyutils-libs-1.2-109.2 installing libattr-2.4.44-2.2 installing libbz2-1-1.0.5-36.6 installing libcap2-2.16-4.2 installing libdb-4_5-4.5.20-98.4 installing libelf1-0.142-3.7 installing libgmp3-4.3.1-2.2 installing libltdl7-2.2.6-47.7 installing liblua5_1-5.1.4-6.2 installing liblzma0-4.999.9beta-2.2 installing libpopt0-1.13-4.2 installing libselinux1-2.0.80-5.2 installing libsepol1-2.0.36-2.2 installing libxcrypt-3.0.2-3.2 installing net-tools-1.60-734.1 installing patch-2.5.9.122-2.1 installing perl-base-5.10.0-72.5 installing zlib-1.2.3-140.2 installing libncurses5-5.6-91.2 installing libpcre0-7.9.0-2.3.1 installing attr-2.4.44-2.2 installing file-5.03-2.2 installing libacl-2.2.48-2.2 installing libreadline6-6.0-18.3 installing libzio-0.99-3.2 installing perl-5.10.0-72.5 installing acl-2.2.48-2.2 installing bash-4.0-18.3 installing build-compare-2009.10.14-2.2.3 installing brp-check-suse-1.0-23.2 installing build-2009.09.23-2.2 installing insserv-1.13.0-2.2 installing libcom_err2-1.41.9-3.1 installing libgcc44-4.4.1_20090817-2.3.4 installing libgomp44-4.4.1_20090817-2.3.4 installing libuuid1-2.16-4.5.1 installing bzip2-1.0.5-36.6 installing cracklib-2.8.13-2.2 installing libmpfr1-2.4.1-3.2 installing libopenssl0_9_8-0.9.8k-3.4 installing less-436-3.2 installing info-4.13a-3.2 installing libcom_err-devel-1.41.9-3.1 installing cpio-2.10-4.2 installing diffutils-2.8.7-145.2 installing findutils-4.4.0-46.2 installing gawk-3.1.6-26.2 installing gzip-1.3.12-100.4 installing libblkid1-2.16-4.5.1 installing libstdc++44-4.4.1_20090817-2.3.4 installing libtool-2.2.6-47.7 installing m4-1.4.13-2.2 installing make-3.81-130.2 installing sed-4.1.5-130.2 installing tar-1.21-4.2 installing binutils-2.19.51-10.26.4 installing grep-2.5.4-4.2 installing texinfo-4.13a-3.2 installing pam-1.1.0-3.2 installing login-3.40-2.1 installing autoconf-2.63-5.2 installing libgmpxx4-4.3.1-2.2 installing gettext-runtime-0.17-65.2 installing coreutils-7.1-3.2 installing linux-kernel-headers-2.6.31-3.4 post linux-kernel-headers-2.6.31-3.4 /var/tmp/rpm-tmp.w3dgsM 1 installing automake-1.11-6.2 installing sysvinit-2.86-215.2 installing timezone-2009p-1.1.1 WARNING: Not updating /etc/localtime with new zone file installing libppl7-0.10.2-5.2 installing cvs-1.12.12-155.2 installing cyrus-sasl-2.1.23-3.1 installing krb5-1.7-6.1 installing psmisc-22.7-8.2 installing groff-1.18.1.1-172.173.2 Updating etc/sysconfig/suseconfig... installing libldap-2_4-2-2.4.17-5.3 installing glibc-devel-2.10.1-10.4 installing gettext-tools-0.17-65.2 installing libppl_c2-0.10.2-5.2 installing man-2.5.2-22.2 Updating etc/sysconfig/cron... installing aaa_base-11.2-43.45.1 Updating etc/sysconfig/language... Updating etc/sysconfig/backup... Updating etc/sysconfig/boot... Updating etc/sysconfig/kernel... Updating etc/sysconfig/suseconfig... Updating etc/sysconfig/clock... Updating etc/sysconfig/proxy... Updating etc/sysconfig/windowmanager... Updating etc/sysconfig/sysctl... Updating etc/sysconfig/cron... Updating etc/sysconfig/news... Updating etc/sysconfig/shutdown... Updating etc/passwd...unchanged Updating etc/group...unchanged Updating etc/shadow...unchanged installing cyrus-sasl-devel-2.1.23-3.1 installing keyutils-devel-1.2-109.2 installing libbz2-devel-1.0.5-36.6 installing libstdc++44-devel-4.4.1_20090817-2.3.4 installing zlib-devel-1.2.3-140.2 installing libcloog0-0.15.7+ppl-2.2 installing netcfg-11.1-2.2 warning: /etc/HOSTNAME created as /etc/HOSTNAME.rpmnew installing permissions-2009.10.07.1653-2.1 Updating etc/sysconfig/security... installing libopenssl-devel-0.9.8k-3.4 installing krb5-devel-1.7-6.1 installing post-build-checks-1.0-66.1 installing cpp44-4.4.1_20090817-2.3.4 installing pam-modules-11.2-4.1 installing util-linux-2.16-4.5.1 installing rpm-4.7.1-6.7.3 Updating etc/sysconfig/services... installing cpp-4.4-4.2 installing openldap2-devel-2.4.17-5.3 installing rpmlint-mini-1.0-219.3 installing gcc44-4.4.1_20090817-2.3.4 installing rpmlint-Factory-1.0-51.1 installing gcc-4.4-4.2 installing gcc44-c++-4.4.1_20090817-2.3.4 installing gcc-c++-4.4-4.2 removing nis flags from //etc/nsswitch.conf... now finalizing build dir... Starting SuSEconfig, the SuSE Configuration Tool... Running in full featured mode. Reading /etc/sysconfig and updating the system... Executing /sbin/conf.d/SuSEconfig.groff... Executing /sbin/conf.d/SuSEconfig.permissions... Finished. ----------------------------------------------------------------- I have the following modifications for msktutil.spec: 4c4 < Release: 1 --- > Release: 43.1 ----------------------------------------------------------------- ----- building msktutil.spec (user abuild) ----------------------------------------------------------------- ----------------------------------------------------------------- + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --define 'disturl obs://build.opensuse.org/home:dipe/openSUSE_11.2/b92ec11f13803a767e9d68f945…' /usr/src/packages/SOURCES/msktutil.spec Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.vXH1X7 + umask 022 + cd /usr/src/packages/BUILD + cd /usr/src/packages/BUILD + rm -rf msktutil-0.4 + /usr/bin/bzip2 -dc /usr/src/packages/SOURCES/msktutil-0.4.tar.bz2 + /bin/tar -xvvf - /bin/tar: Record size = 8 blocks drwxr-xr-x jknight/jknight 0 2010-03-16 05:12 msktutil-0.4/ -rw-r--r-- jknight/jknight 6323 2010-03-16 05:12 msktutil-0.4/msktconf.cpp -rw-r--r-- jknight/jknight 10736 2010-03-16 05:12 msktutil-0.4/msktkrb5.cpp -rw-r--r-- jknight/jknight 5470 2010-03-16 05:12 msktutil-0.4/krb5wrap.h -rw-r--r-- jknight/jknight 18011 2010-03-16 05:12 msktutil-0.4/LICENSE -rw-r--r-- jknight/jknight 1894 2010-03-16 05:12 msktutil-0.4/README -rwxr-xr-x jknight/jknight 152439 2010-03-16 05:12 msktutil-0.4/configure -rw-r--r-- jknight/jknight 10414 2010-03-16 05:12 msktutil-0.4/msktutil.interactive -rw-r--r-- jknight/jknight 3274 2010-03-16 05:12 msktutil-0.4/configure.in drwxr-xr-x jknight/jknight 0 2010-03-16 05:12 msktutil-0.4/debian/ -rw-r--r-- jknight/jknight 648 2010-03-16 05:12 msktutil-0.4/debian/control -rwxr-xr-x jknight/jknight 2178 2010-03-16 05:12 msktutil-0.4/debian/rules -rw-r--r-- jknight/jknight 2009 2010-03-16 05:12 msktutil-0.4/debian/changelog -rw-r--r-- jknight/jknight 651 2010-03-16 05:12 msktutil-0.4/debian/postinst -rw-r--r-- jknight/jknight 340 2010-03-16 05:12 msktutil-0.4/debian/cron-daily.sh -rw-r--r-- jknight/jknight 643 2010-03-16 05:12 msktutil-0.4/debian/copyright -rw-r--r-- jknight/jknight 1197 2010-03-16 05:12 msktutil-0.4/Makefile.in -rw-r--r-- jknight/jknight 5931 2010-03-16 05:12 msktutil-0.4/msktname.cpp -rw-r--r-- jknight/jknight 25907 2010-03-16 05:12 msktutil-0.4/msktutil.cpp -rw-r--r-- jknight/jknight 2403 2010-03-16 05:12 msktutil-0.4/config.h.in -rw-r--r-- jknight/jknight 27478 2010-03-16 05:12 msktutil-0.4/msktldap.cpp -rw-r--r-- jknight/jknight 12406 2010-03-16 05:12 msktutil-0.4/msktutil.M -rw-r--r-- jknight/jknight 9043 2010-03-16 05:12 msktutil-0.4/msktutil.h -rw-r--r-- jknight/jknight 1330 2010-03-16 05:12 msktutil-0.4/INSTALL -rw-r--r-- jknight/jknight 2978 2010-03-16 05:12 msktutil-0.4/ChangeLog -rw-r--r-- jknight/jknight 7846 2010-03-16 05:12 msktutil-0.4/msktpass.cpp -rw-r--r-- jknight/jknight 6816 2010-03-16 05:12 msktutil-0.4/krb5wrap.cpp + STATUS=0 + '[' 0 -ne 0 ']' + cd msktutil-0.4 + /bin/chmod -Rf a+rX,u+w,g-w,o-w . + exit 0 Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.eZpFOg + umask 022 + cd /usr/src/packages/BUILD + /bin/rm -rf /usr/src/packages/BUILDROOT/msktutil-0.4-43.1.x86_64 ++ dirname /usr/src/packages/BUILDROOT/msktutil-0.4-43.1.x86_64 + /bin/mkdir -p /usr/src/packages/BUILDROOT + /bin/mkdir /usr/src/packages/BUILDROOT/msktutil-0.4-43.1.x86_64 + cd msktutil-0.4 + CXXFLAGS=' -I/usr/include/et' + export CXXFLAGS + RPM_OPT_FLAGS='-fmessage-length=0 -O2 -Wall -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -I/usr/include/et' + export RPM_OPT_FLAGS + CFLAGS='-fmessage-length=0 -O2 -Wall -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables' + export CFLAGS + CXXFLAGS=' -I/usr/include/et' + export CXXFLAGS + FFLAGS='-fmessage-length=0 -O2 -Wall -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables' + export FFLAGS + ./configure --host=x86_64-unknown-linux-gnu --build=x86_64-unknown-linux-gnu --target=x86_64-suse-linux --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib64 --libexecdir=/usr/lib --localstatedir=/var --sharedstatedir=/usr/com --mandir=/usr/share/man --infodir=/usr/share/info checking for x86_64-unknown-linux-gnu-g++... no checking for x86_64-unknown-linux-gnu-c++... no checking for x86_64-unknown-linux-gnu-gpp... no checking for x86_64-unknown-linux-gnu-aCC... no checking for x86_64-unknown-linux-gnu-CC... no checking for x86_64-unknown-linux-gnu-cxx... no checking for x86_64-unknown-linux-gnu-cc++... no checking for x86_64-unknown-linux-gnu-cl.exe... no checking for x86_64-unknown-linux-gnu-FCC... no checking for x86_64-unknown-linux-gnu-KCC... no checking for x86_64-unknown-linux-gnu-RCC... no checking for x86_64-unknown-linux-gnu-xlC_r... no checking for x86_64-unknown-linux-gnu-xlC... no checking for g++... g++ checking for C++ compiler default output file name... a.out checking whether the C++ compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C++ compiler... yes checking whether g++ accepts -g... yes checking for install... /usr/bin/install checking for cat... /bin/cat checking for rm... /bin/rm checking for cp... /bin/cp checking for echo... /bin/echo checking for sed... /usr/bin/sed checking for mkdir... /bin/mkdir checking how to run the C++ preprocessor... g++ -E checking for grep that handles long lines and -e... /usr/bin/grep checking for egrep... /usr/bin/grep -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking krb5.h usability... yes checking krb5.h presence... yes checking for krb5.h... yes checking com_err.h usability... yes checking com_err.h presence... no configure: WARNING: com_err.h: accepted by the compiler, rejected by the preprocessor! configure: WARNING: com_err.h: proceeding with the compiler's result checking for com_err.h... yes checking heim_err.h usability... no checking heim_err.h presence... no checking for heim_err.h... no checking heimdal/heim_err.h usability... no checking heimdal/heim_err.h presence... no checking for heimdal/heim_err.h... no checking sasl.h usability... no checking sasl.h presence... no checking for sasl.h... no checking sasl/sasl.h usability... yes checking sasl/sasl.h presence... yes checking for sasl/sasl.h... yes checking for krb5_init_context in -lkrb5... yes checking for ldap_initialize in -lldap... yes checking whether com_err.h needs extern "C"... configure: error: Couldn't get error_message to work. error: Bad exit status from /var/tmp/rpm-tmp.eZpFOg (%build) RPM build errors: Bad exit status from /var/tmp/rpm-tmp.eZpFOg (%build) System halted. On Fri, Apr 16, 2010 at 1:52 PM, Marcus Meissner <meissner(a)suse.de> wrote: > On Fri, Apr 16, 2010 at 08:19:22AM -0700, Di Pe wrote: >> ran it again but still the same error, >> >> any other ideas? > > Can you add a > cat config.log > > after the configure and mail me the full log? > > Ciao, Marcus > -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-buildservice+help(a)opensuse.org

3 5

[opensuse-buildservice] Virtualizing OBS worker build environment with OpenVZ or LXC
by Ville.Seppanen＠tieto.com 13 Jun '11

13 Jun '11

Greetings, Is there any work being done for OpenVZ, LXC or other OS-level virtualization support for the build environment in OBS? I am doing my Master's thesis on extending OBS to the cloud. Seeing that Amazon Web Services uses Xen for virtualization (and thus does not support Xen/KVM inside it), and that building without a sandboxed environment is not safe, OpenVZ and LXC would seem promising. There's also much talk about using these technologies in AWS, so I would see it possible. Best Regards, Ville Seppänen Tieto Corporation -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-buildservice+help(a)opensuse.org

4 4

[opensuse-buildservice] getbinarylist and Transfer-Encoding header
by Marcus Hüwe 26 May '11

26 May '11

Hi, there seems to be a problem with the getbinarylist call (view=cpio) and the "Transfer-Encoding" header (depending on the "length" of the request?). I just tried the following curl calls: curl -o out.cpio -v -sS \ "https://api.opensuse.org/public/build/openSUSE:Factory/standard/x86_64/_rep… -e "print 'b'x3616")" and curl -o out.cpio -v -sS \ "https://api.opensuse.org/public/build/openSUSE:Factory/standard/x86_64/_rep… -e "print 'b'x3617")" The response of the first request still includes the "Transfer-Encoding" header but the response of the second request has no "Transfer-Encoding" header. Now consider the following call: curl http://<local obs>/build/<remote project>/<repo>/<arch>/_repository?view=cpio&<long query> This leads to a "crash" in bs_srcserver (the ajax process dies because the response has neither a "Transfer-Encoding" nor a "Content-Length" header). Any ideas why the "Transfer-Encoding" header gets swallowed? Marcus Ps. is this the same bug to which a comment in "worker_getbinaries" refers? -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-buildservice+help(a)opensuse.org

3 3

[opensuse-buildservice] Buil failor, cdbs ubuntu
by peer 10 May '11

10 May '11

Hi, The package cdbs keeps failing on me. I try to backport it from Debian and / or Ubuntu 10.10 to Ubuntu 10.04. Was always working, but now it fails or it fails for one architecture (something one sometimes the other arch...). https://build.opensuse.org/package/show?package=cdbs3&project=home%3Aopen-s… I need some help cause pretty some packages depends on a newer version of cdbs. Thanks in advance, ~P -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-buildservice+help(a)opensuse.org

9 41

[opensuse-buildservice] How to build i686 only package in BuildService?
by Michal Vyskocil 01 Apr '11

01 Apr '11

Hi, there's a bug#682 in icedtea bugzilla, that JRE fails to run on i586 machine with guarantee(VM_Version::supports_cmov()) failed: illegal instruction. After reading the code it seems JIT emits cmov* instructions, so the produced native code cannot run on i586 processors. I think the most clean way how to fix this in openSUSE is build our openjdk (and Sun Java as well?) as i686 only packages as Fedora and RedHat already does. However it seems like pretty challenging in a BuildService, because the only one package with i686 version I'm aware is glibc, but this approach seems not usable for openjdk, where only i686 and not i586 version is needed. So how can be only i686 rpm packages produced in a buildservice? [1] http://icedtea.classpath.org/bugzilla/show_bug.cgi?id=682 Regards Michal Vyskocil

6 10

[opensuse-buildservice] Options to use 'mknod' in OBS?
by Troy Telford 31 Mar '11

31 Mar '11

I'm working with a bit of legacy code that's apparently writing files manually for an initial ramdisk (initrd). In its makefile, it's using 'mknod -m 660 tty1 c 4 1' This causes issues with OBS, as mknod doesn't work for non-root users, IIRC. I know OBS executes builds as user 'abuild', and it makes sense to me to have a nonprivileged user doing the build. Since running builds as root is verboten, what options do I have to build this package with OBS? (Note: I am using my own OBS server/build nodes, not build.opensuse.org) -- Troy Telford -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-buildservice+help(a)opensuse.org

2 1

[opensuse-buildservice] build service down?
by Mathias Homann 31 Mar '11

31 Mar '11

hi, was there some planned outage for today? Web frontend is down, osc can't connect, etc etc. bye, MH -- gpg key fingerprint: 5F64 4C92 9B77 DE37 D184 C5F9 B013 44E7 27BD 763C () ascii ribbon campaign against HTML e-mail /\ www.asciiribbon.org -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-buildservice+help(a)opensuse.org

10 12

[opensuse-buildservice] Re: [PATCH] [appliance] <darix> dl9pf: shouldn't haveged be started on it before it tries to build the key? - !
by Michael Schroeder 30 Mar '11

30 Mar '11

On Wed, Mar 30, 2011 at 12:31:23PM +0200, OBS build-service wrote: > From: Jan-Simon Möller <jsmoeller(a)linuxfoundation.org> > > Signed-off-by: Jan-Simon Möller <jsmoeller(a)linuxfoundation.org> > --- > dist/obsstoragesetup | 2 +- > 1 files changed, 1 insertions(+), 1 deletions(-) > > diff --git a/dist/obsstoragesetup b/dist/obsstoragesetup > index 4fd0a62..9715052 100755 > --- a/dist/obsstoragesetup > +++ b/dist/obsstoragesetup > @@ -12,7 +12,7 @@ > # Start-Before: mysql sshd > # Should-Start: xendomains > # Should-Stop: $none > -# Required-Start: $network boot.lvm > +# Required-Start: $network boot.lvm haveged > # Required-Stop: $null Doesn't that belong to Should-Start? Cheers, Michael. -- Michael Schroeder mls(a)suse.de SUSE LINUX Products GmbH, GF Markus Rex, HRB 16746 AG Nuernberg main(_){while(_=~getchar())putchar(~_-1/(~(_|32)/13*2-11)*13);} -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-buildservice+help(a)opensuse.org

3 2

[opensuse-buildservice] rsync publishing?
by Troy Telford 29 Mar '11

29 Mar '11

I'm not sure of OBS does this; I've got my own OBS instance (actually, several, but...) What I'd like to be able to do is have OBS push 'published' files out to an external rsync mirror at a different site, rather than having an external periodic rsync script. Is this possible? Does OBS allow me to push packages from the download repository to an external source? Thanks. -- Troy Telford -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-buildservice+help(a)opensuse.org

2 2

[opensuse-buildservice] osc build
by Matwey V. Kornilov 29 Mar '11

29 Mar '11

Hi, I have a trouble with 'osc build'. I run local obs and I use openSUSE.org:* repos (which are at the main api server). When I try to 'osc build' a package from my local obs, it fails to download packages and says "Error: No more mirrors to try.". It was able to download packages from main api-server several month ago but now it can't. my osc is 0.130.1 and 0.125.5. my obs is 2.1.6. -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-buildservice+help(a)opensuse.org

2 1

[opensuse-buildservice] Have choice - Debian 5.0 - svgalib
by Claudio Freire 29 Mar '11

29 Mar '11

I'm getting this for Debian 5.0 repos: have choice for svgalibg1 | svgalib-dummyg1 needed by libsdl1.2debian-alsa: libsvga1 svgalibg1 It's tied to dependency with libsdl1.2-dev, I'll work around it by adding to the dependencies explicitly, but I read on the FAQ that I should let you guys know so it can be resolved for all. -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-buildservice+help(a)opensuse.org

2 6

[opensuse-buildservice] Making kernel module for kernels in HEAD
by Roger Oberholtzer 28 Mar '11

28 Mar '11

OBS has been making kernel modules for me for quite a while. It works great making them for openSUSE 11.2/3/4, or an update. I now find that I need to make the drivers for the kernel in HEAD (e.g., http://download.opensuse.org/repositories/Kernel:/HEAD/openSUSE_11.2). Since I cannot select that as a build repo, I am unsure how/if I can get OBS to make packages based on the kernel found there. If it is possible, can anyone suggest where I might find info or a sample of this usage? If it is not possible, can anyone suggest a manageable alternative? Yours sincerely, Roger Oberholtzer OPQ Systems / Ramböll RST Office: Int +46 10-615 60 20 Mobile: Int +46 70-815 1696 roger.oberholtzer(a)ramboll.se ________________________________________ Ramböll Sverige AB Krukmakargatan 21 P.O. Box 17009 SE-104 62 Stockholm, Sweden www.rambollrst.se -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-buildservice+help(a)opensuse.org

4 7

[opensuse-buildservice] BuildService API error: unknown element: releasetarget
by Cristian Rodríguez 28 Mar '11

28 Mar '11

Hi: Running the following command: # osc mbranch -c timezone Results in error: BuildService API error: unknown element: releasetarget Any hint about it ? -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-buildservice+help(a)opensuse.org

2 1

[opensuse-buildservice] .ymp files for repos?
by Greg KH 25 Mar '11

25 Mar '11

A long time ago the build service used to create .ymp file for repositories. However, I don't seem to be able to find them anymore, is that not the case? Or is it an option to enable that I'm missing somewhere? As an example, I can't find a .ymp file anywhere under: http://download.opensuse.org/repositories/openSUSE:/Tumbleweed:/Testing/ Am I blind? thanks, greg k-h -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-buildservice+help(a)opensuse.org

4 5

[opensuse-buildservice] Re: [PATCH] [appliance] Chown all directories on appliance change.
by Adrian Schröter 24 Mar '11

24 Mar '11

Am Mittwoch, 23. März 2011, 23:23:13 schrieb OBS build-service: > From: Jan-Simon Möller <jsmoeller(a)linuxfoundation.org> > > Signed-off-by: Jan-Simon Möller <jsmoeller(a)linuxfoundation.org> > --- > dist/obsstoragesetup | 2 +- > 1 files changed, 1 insertions(+), 1 deletions(-) > > diff --git a/dist/obsstoragesetup b/dist/obsstoragesetup > index eae6e93..ca7c7a9 100755 > --- a/dist/obsstoragesetup > +++ b/dist/obsstoragesetup > @@ -258,7 +258,7 @@ case "$1" in > [ -d /obs/info ] || mkdir /obs/info > [ -d /obs/projects ] || mkdir /obs/projects > [ -d /obs/workers ] || mkdir /obs/workers > - chown obsrun.obsrun /obs/{,log,run,build,events,jobs,info,projects,workers} > + chown -R obsrun:obsrun /obs/{,build,db,events,info,jobs,log,projects,remotecache,repos,repos_sync,run,sources,trees,upload,workers} Uh, isn't that a bit too agressive ? Someone might have done a chown to root to be sure that OBS does not touch certain binaries anymore. Actually the entire chown should not be needed, the appliances should have always the same userid. If that is not the case we have a bug ... > else > echo "Setup local storage" > if [ -e /obs -a ! -L /obs ]; then > -- Adrian Schroeter SUSE Linux Products GmbH email: adrian(a)suse.de -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-buildservice+help(a)opensuse.org

4 4

[opensuse-buildservice] New kernel module build failures
by Roger Oberholtzer 23 Mar '11

23 Mar '11

Some of my device drivers have stop building on OBS (e.g., openSUSE 11.2, 11,3). The log from OBS says this: Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.2QBwE1 + umask 022 + cd /usr/src/packages/BUILD + /bin/rm -rf /usr/src/packages/BUILDROOT/vmic_enable-0.10-10.2.i386 ++ dirname /usr/src/packages/BUILDROOT/vmic_enable-0.10-10.2.i386 + /bin/mkdir -p /usr/src/packages/BUILDROOT + /bin/mkdir /usr/src/packages/BUILDROOT/vmic_enable-0.10-10.2.i386 + cd vmic_enable-0.10 + for flavor in debug default desktop pae xen + rm -rf obj/debug + cp -r source obj/debug + make -C /usr/src/linux-obj/i586/debug modules M=/usr/src/packages/BUILD/vmic_enable-0.10/obj/debug make: Entering directory `/usr/src/linux-2.6.31.5-0.1-obj/i386/debug' Makefile:23: *** mixed implicit and normal rules. Stop. make: Leaving directory `/usr/src/linux-2.6.31.5-0.1-obj/i386/debug' error: Bad exit status from /var/tmp/rpm-tmp.2QBwE1 (%build) All the other repos seem to build as expected. The modules have a Kbuild file, like this: obj-m := vmic_enable.o and a source file. The packages are old, the error is new. Did I miss some change? Yours sincerely, Roger Oberholtzer OPQ Systems / Ramböll RST Office: Int +46 10-615 60 20 Mobile: Int +46 70-815 1696 roger.oberholtzer(a)ramboll.se ________________________________________ Ramböll Sverige AB Krukmakargatan 21 P.O. Box 17009 SE-104 62 Stockholm, Sweden www.rambollrst.se -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-buildservice+help(a)opensuse.org

5 19

[opensuse-buildservice] disable parallel builds via meta data
by peer 23 Mar '11

23 Mar '11

Hi, Parallel building seems to be enabled for Ubuntu / Debian. Debian itself doesn't use parallel building afaik and I do experience some problems with it on obs. Wouldn't it be possible to add a feature which allows to disable parallel builds via packages meta data so one doesn´t have to change any broken packages imported from debian or buntu but can simply fix it by modifying the meta data? Thanks in advance, ~P -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-buildservice+help(a)opensuse.org

4 6

[opensuse-buildservice] Install path for .svg icons
by Volker Poplawski 22 Mar '11

22 Mar '11

Hi everybody, what's the best/official place for installing a .svg application icon? Referenced in the application's .desktop file. (/usr/share/icons/ as install path is rejected by the /usr/lib/rpm/brp-desktop script) Regards ....Volker -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-buildservice+help(a)opensuse.org

3 2

[opensuse-buildservice] Superseeding SRs in webui
by Dominique Leuenberger a.k.a DimStar 22 Mar '11

22 Mar '11

Hi, something I constantly run into when using webui is the fact that there is no warning / message that there is an older SR pending for a package with the option to superseed the previous one (as osc does). This typically leaves to 2 SRs against one package where in worst case the target project might end up accepting the wrong one (in case the submitter forgets to retract the old request). Are there any plans to implement this on webui as well? Dominique -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-buildservice+help(a)opensuse.org

1 0

[opensuse-buildservice] Prefer vs Support vs Keep vs Substitute
by Jon Nelson 22 Mar '11

22 Mar '11

What is the difference between Support and Keep? Like, let's say I have a package FOO that I'd like to always be installed in the build environment, *if* it is available. If it is not available, block all other builds until it *is* available, but do not block FOO itself. How do I do that? Is there a way to configure a project with more than one repository with different configurations (such as, when using repo A, substitute foo for bar)? -- Jon -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-buildservice+help(a)opensuse.org

2 3

[opensuse-buildservice] Solving source service misconceptions
by Sascha Peilicke 21 Mar '11

21 Mar '11

Hi y'all, as it occured several times already, there seem to be some misconceptions about source services for the Build Service. Recently, it seemed to became fashionable to replace each and every package tarball with a download service pointing to some URL. As by most commit messages, people seem to be believe that some magic update logic will happen once upstream releases a new tarball. Just to make this clear, this won't happen! The only thing that changes is that the source tarball is not stored alongside your spec but downloaded on-demand instead (speak, with every rebuild). And it is not (yet) cached and you still have to update stuff (by changing that URL). As a packager, you have to download the tarball anyways because you want to look at new documentation files or update your local patches. However, this may make sense if you use it together with some more source services (like re-packaging or checksum checks), but I consider it unfriendly to change someone else's packages to use source services without asking. Please don't do that. -- Mit freundlichen Grüßen, Sascha Peilicke http://saschpe.wordpress.com

3 2

[opensuse-buildservice] Conflict in branch
by Claudio Freire 17 Mar '11

17 Mar '11

Hi, I have this branch of the pgadmin3 project: https://build.opensuse.org/package/show?package=pgadmin3&project=home%3Akla… It was ok, until recently there seems to have been a conflicting change in the parent project since the status changed to broken: conflict in pgadmin3.spec I have no access to the osc tool currently, only the web ui - how can I resolve the conflict from there? I can't even get a description of the conflicting changes. -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-buildservice+help(a)opensuse.org

2 2

[opensuse-buildservice] Someone broke my deb builds
by Stephan Kleine 17 Mar '11

17 Mar '11

Hi guys. Someone changed something between 2011-03-02 17:11:55 and 2011-02-23 19:38:19 that broke all my deb builds for one package. Package in question: security:OpenVAS:UNSTABLE:v4/libopenvas Why it wasn't me who fucked it up: 1. As you can see the latest version (4.0.2) is on d.o.o so it must have been build properly at one point in time. 2. Now it is broken albeight I didn't change a thing (config or source). 3. If you check out an older revision - that built fine - you'll notice that it is broken too now (I tried with r11-9). Please have a look at this. regards, Stephan -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-buildservice+help(a)opensuse.org

4 7

[opensuse-buildservice] openSUSE_11.4 repo for devel:tools
by Adam Mizerski 17 Mar '11

17 Mar '11

Will someone create it? -- Adam "etamPL" Mizerski -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-buildservice+help(a)opensuse.org

3 2

[opensuse-buildservice] download on demand?
by Robert Xu 16 Mar '11

16 Mar '11

Hi, I know it's been mentioned before, but I seem to have lost the email about it... Can anyone post the patch for it/how to use it again? -- later, Robert Xu -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-buildservice+help(a)opensuse.org

2 3

[opensuse-buildservice] Local obs scheduler and sync from remote
by Christian Daudt 16 Mar '11

16 Mar '11

Hi, I have a couple of questions on local-obs sync from remote obs (I have a project on local obs linked to a project on remote obs). First: sometimes the scheduler gets stuck for quite a while, and from the logs it seems that it is downloading from the remote obs. If there's a lot to download this can take > 20 minutes. During this time, all job processing seems to halt. Is that the case and if so, is there a way to avoid it? All of the local-only projects get stuck along, when they don't depend at all on what's being downloaded. 2nd: I see the same 'getting data for project' logs in the different schedulers (from remote obs) - is it cached locally on the 1st download, or does each sched re-download the same version of the same pkgs? The only way I see right now to avoid this problem is to setup 2 local obs, with one acting effectively as a cache for the remote downloads. I'm hoping there's a less draconian solution... Thanks, Christian. -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-buildservice+help(a)opensuse.org

1 0

[opensuse-buildservice] Missing icon in WEB UI
by Kyrill Detinov 15 Mar '11

15 Mar '11

Tuesday 15 March 2011 Hello. In package > Users linked icon "Inherited from project" is missing. Link to icon is https://static.opensuse.org/hosts/build2.o.o/images/icons/project.png Not Found The requested URL /hosts/build2.o.o/images/icons/project.png was not found on this server. -- WBR Kyrill -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-buildservice+help(a)opensuse.org

1 0

[opensuse-buildservice] RFC/proposal for "osc ls -r/-R" command line inconsitency
by Adrian Schröter 15 Mar '11

15 Mar '11

Hi, please comment on this. I personally run often into a osc CLI inconsitency that the list/ls comand is using -R for revision listings, while other commands like diff, rdiff, submitrequest are using -r for revision. -r for list command is "repository" which is usually ignored on source listings. I like to proposed change switch -r and -R in list command to have this consistent. In addition to that we could maybe do a backward compatibly check that when -r and -b is used for binary listings that -r is still used as repository parameter. any comments on this ? adrian -- Adrian Schroeter SUSE Linux Products GmbH email: adrian(a)suse.de -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-buildservice+help(a)opensuse.org

3 3

[opensuse-buildservice] Driver-Update-Disk generation
by Johannes Weberhofer 15 Mar '11

15 Mar '11

Hi! is there a way to create a driver-update-disk directly via obs? I found some related information in the mailing-lists, but I did not find out whether it works now. Best regards, Johannes -- Johannes Weberhofer Weberhofer GmbH, Austria, Vienna -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-buildservice+help(a)opensuse.org

2 1

[opensuse-buildservice] Problem with 2 packages that use nautilus-python
by Angelos Tzotsos 14 Mar '11

14 Mar '11

Hi all, There seems to be a problem in openSUSE 11.4 with nautilus-python. I am creating packages for 2 projects that use it (TortoiseHG, RabbitVCS) and both of them fail to start and block Nautilus from starting up in 11.4 only. https://build.opensuse.org/project/monitor?project=home%3Atzotsos%3Avcs If I try to import nautilus from a python console I get an error that there is not such a module. I found the following links about the issue: https://bugzilla.gnome.org/show_bug.cgi?id=633171 http://bugzilla-attachments.gnome.org/attachment.cgi?id=178235 and then I found a new version of nautilus-python: http://projects.gnome.org/nautilus-python/ So I branched the package from GNOME:Apps and updated to the new version. The problem is that even with the new version I still get the same errors, which probably means it is not patched yet, or there is something I am missing. Could someone please take a look on this issue? Is there someone from GNOME:Apps around to help? Regards, Angelos -- Angelos Tzotsos Remote Sensing Laboratory National Technical University of Athens http://users.ntua.gr/tzotsos -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-buildservice+help(a)opensuse.org

1 0

[opensuse-buildservice] Experimenting with the cpanspec service
by Greg Freemyer 12 Mar '11

12 Mar '11

All, Does the cpanspec service in OBS work? == details I thought I'd try out the cpanspec service. Looking at the parameters it needs, it seems easy enough: https://build.opensuse.org/package/view_file?file=cpanspec.service&package=… But when I try it I get: === Source processing is currently broken: service cpanspec failed: defined(%hash) is deprecated at /usr/lib/perl5/vendor_perl/5.12.1/Pod/POM/Node.pm line 82. (Maybe you should just omit the defined()?) Failed to get http://www.cpan.org/modules/02packages.details.txt.gz: 500 Can't connect to www.cpan.org:80 (Bad hostname 'www.cpan.org') === Those look like pretty fundamental issues unrelated to my package. Thanks for feedback Greg -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-buildservice+help(a)opensuse.org

2 4

[opensuse-buildservice] Account blocked
by Gerrit Beine 12 Mar '11

12 Mar '11

Hi, my build service account is blocked. The message is: Your login capability is locked. Please contact your system administrator. Someone told me in IRC that I've done something wrong and for that I'm banned. What can I do to reactivate my account? Best regards Gerrit Beine -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-buildservice+help(a)opensuse.org

1 0

[opensuse-buildservice] OBS2.1, bs_admin dump-cache does not work
by Jeff_Glanz＠Dell.com 10 Mar '11

10 Mar '11

Distribution: OBS2.1 bs_admin -dump-cache does not work with the new :full.solv file structure. I'm also unser if -rescan-repoistory is working as expected. Here's the specific error: host:/usr/lib/obs/server> sudo -u obsrun -- /usr/lib/obs/server/bs_admin --dump-cache Project standard i586 can't open /srv/obs/build/Project/standard/i586/:full.cache: No such file or directory at /usr/lib/obs/server/bs_admin line 284 Thanks - Jeff Glanz PG Build team Dell Computers, Round Rock, Texas -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-buildservice+help(a)opensuse.org

2 1

[opensuse-buildservice] Wrong ubuntu version in prjconf?
by Gerd Fleischer 10 Mar '11

10 Mar '11

Hi, in Ubuntu 10.10 osc meta prjconf shows %define ubuntu_version 10 <== should this be 1010? Macros: %opensuse_bs 1 %ubuntu_version 1010 For the other ubuntus its 910, 1004 ... Regards, Gerd -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-buildservice+help(a)opensuse.org

2 1

[opensuse-buildservice] osc build and issues with gpg key
by Mariusz Fik 09 Mar '11

09 Mar '11

I wanted to work on some package from Contrib. During local build i get following errors: Verifying integrity of cached packages using keys from openSUSE:Factory, openSUSE:Factory:Contrib error: rpmts_HdrFromFdno: Header V3 RSA/SHA256 Signature, key ID 3dbdc284: BAD /var/tmp/osbuild- packagecache/openSUSE:Factory/standard/i586/aaa_base-11.5-60.1.i586.rpm : error reading package header error: rpmts_HdrFromFdno: Header V3 RSA/SHA256 Signature, key ID 3dbdc284: BAD /var/tmp/osbuild- packagecache/openSUSE:Factory/standard/i586/libuuid1-2.19-6.1.i586.rpm : error reading package header error: rpmts_HdrFromFdno: Header V3 RSA/SHA256 Signature, key ID 3dbdc284: BAD /var/tmp/osbuild- packagecache/openSUSE:Factory/standard/i586/libtalloc2-2.0.1-21.2.i586.rpm : error reading package header error: rpmts_HdrFromFdno: Header V3 RSA/SHA256 Signature, key ID 3dbdc284: BAD /var/tmp/osbuild- packagecache/openSUSE:Factory/standard/i586/gawk-3.1.6-34.17.i586.rpm : error reading package header I use osc-0.130.1-30.1 from openSUSE:Tools How can I solve it? -- Pozdrawiam / Best regards, Mariusz Fik openSUSE Community Member

2 1

[opensuse-buildservice] Re: [PATCH] Reverting Sascha's unicode attempt. This made 'osc submit' always fail with uncaught exception: Fatal error: Start tag expected, '<' not found at :1.
by Marcus Hüwe 08 Mar '11

08 Mar '11

Hi, On 2011-03-07 18:02:50 +0100, OBS osc wrote: > From: Juergen Weigert <jw(a)suse.de> > > --- > osc/core.py | 7 ++++++- > 1 files changed, 6 insertions(+), 1 deletions(-) > > diff --git a/osc/core.py b/osc/core.py > index ccc1a06..560a36e 100644 > --- a/osc/core.py > +++ b/osc/core.py > @@ -3512,7 +3512,12 @@ def create_submit_request(apiurl, > orev or show_upstream_rev(apiurl, src_project, src_package), > targetxml, > options_block, > - cgi.escape(unicode(message, "utf8"))) > + cgi.escape(message)) > + > + # Don't do cgi.escape(unicode(message, "utf8"))) above. > + # Promoting the string to utf8, causes the post to explode with: > + # uncaught exception: Fatal error: Start tag expected, '<' not found at :1. > + # I guess, my original workaround was not that bad. > Hmm can you please provide the exact commandline of the failing osc command? At the moment I fail to see what's wrong with a simple "cgi.escape(message)" (without the unicode stuff). Marcus -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-buildservice+help(a)opensuse.org

2 2

[opensuse-buildservice] Add Scientific Linux to OBS
by Stephan Kleine 08 Mar '11

08 Mar '11

Hi guys, could Scientific Linux 6 please get added to OBS? Reasoning is that RHEL6 is basically useless since it is missing loads of - devel packages and CentOS isn't that healthy anymore (sadly) apparently. regards, Stephan -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-buildservice+help(a)opensuse.org

10 18

[opensuse-buildservice] Mandrive x86_64 missing libmesaglut3-devel
by Claudio Freire 08 Mar '11

08 Mar '11

I got "nothing provides libMesaglut3-devel" on the x86_64 arch in mandriva (see this project: https://build.opensuse.org/package/show?package=vegastrike&project=home%3Ak… ). The package doesn't directly specify libmesaglut3-devel, so I bet it's a dependency of some of the requirements, which do include freeglut3. After googling around, I found this, which seems related: http://forum.mandriva.com/en/viewtopic.php?f=73&t=115581 I wouldn't want to distribute my own libmesaglut3-devel (by adding it to the project), so maybe the 1.2mdv version can be added to the build service's repo? -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-buildservice+help(a)opensuse.org

1 0

[opensuse-buildservice] Howto decline an accepted request?
by Lars Vogdt 08 Mar '11

08 Mar '11

Hi OBS-Masters My fault, I know. But I have the following problem: I want to decline a submitrequest[1] but misleadingly clicked on the "accept" instead of the "decline" button. (Usability guys, please keep an endless space between those two buttons. ;-) Now I like to know if it is possible to decline an accepted submitrequest or what is the expected workflow in such a case? With kind regards, Lars -- [1]: https://build.opensuse.org/request/show/63523 -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-buildservice+help(a)opensuse.org

2 1

[opensuse-buildservice] locking a project and making it readonly
by Anas Nashif 07 Mar '11

07 Mar '11

Hi, Is there an easy way to lock a project and prevent and changes to it? I am basically looking for a way to prevent changes for a short period of time, something like 'emergency moderation' disallowing any of the maintainers to directly change or accept requests targeting the project... Ideas? Anas-- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-buildservice+help(a)opensuse.org

2 1

[opensuse-buildservice] Can't access to my repository
by Mauro Parra 07 Mar '11

07 Mar '11

Hello, I branched a package like this: home:mpmiranda:branches:network:ldap:OpenLDAP:RE23 applied some patches, and everything went just fine. I need the packages, and I tried to get them from my download repository, without success: http://download.opensuse.org/repositories/home:/mpmiranda:/branches:/networ… why is this happening? How I can expose this repo to a Novell's customer? Best, M -- Saludos, Mauro Parra-Miranda Consultor Senior Novell - mparra(a)novell.com openSUSE Developer - mauro(a)openSUSE.org BB PIN - 22600AE9 -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-buildservice+help(a)opensuse.org

3 2

[opensuse-buildservice] How do I merge back into my own package.
by Paul Elliott 06 Mar '11

06 Mar '11

At drawing board I have crazy idea. Plan: branch my own package. implement idea. if failure, delete branch, hope noone noticed it. Back to drawing board. if success merge branch back into main package. Since I own both the branch and the main package, do I have to create a request to myself and accept it? Or is there a way I can directly merge one of my own branches back? osc help does not seem to show the command. I can not find the documentation on this? Thank You. -- Paul Elliott 1(512)837-1096 pelliott(a)BlackPatchPanel.com PMB 181, 11900 Metric Blvd Suite J http://www.free.blackpatchpanel.com/pme/ Austin TX 78758-3117

2 1

Re: [opensuse-buildservice] Question about _services in OBS
by Claudio Freire 05 Mar '11

05 Mar '11

On Sat, Mar 5, 2011 at 5:34 PM, Robert Xu <robxu9(a)gmail.com> wrote: > > Nope. Just Gtk2-Unique-0.05.tar.gz. > The _service file just shows what services you're using. If you use the file as input to other services, though, you'll need the _service:download_url prefix. In spec files, the bare unprefixed name is fine. -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-buildservice+help(a)opensuse.org

1 0

[opensuse-buildservice] Question about _services in OBS
by Sascha Manns 05 Mar '11

05 Mar '11

Hello Mates, today i've tried out the Services and added a "Download a File from URL" Service. I've filled out the host and the Target and now i have a _service and a _service:download_url:Gtk2-Unique-0.05.tar.gz. How must i handle this for building a local Package? Must i add "_service:download_url:Gtk2-Unique-0.05.tar.gz" as Source? Have we on any place a good Documentation about the Services? cu Sascha -- Sincerely Yours Sascha Manns open-slx Community & Support Agent openSUSE Membership Comitee openSUSE Marketing Team Blog: http://saigkill.wordpress.com German Community Portal: http://community.open-slx.de -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-buildservice+help(a)opensuse.org

3 2

[opensuse-buildservice] Reading "dependson" output
by Cristian Morales Vega 05 Mar '11

05 Mar '11

gnome-mplayer depends on MPlayer, which depends on mpg123, which in the last update no longer depends on openal and neither buildrequires SDL_sound: $ osc dependson gnome-mplayer ... meta change changed keys: added MPlayer/libmpg123-0 added MPlayer/libmpg123-0/libSDL_sound-1_0-1 added MPlayer/libmpg123-0/libSDL_sound-1_0-1/libmikmod-devel added MPlayer/libmpg123-0/libSDL_sound-1_0-1/libspeexdsp1 added MPlayer/libmpg123-0/libSDL_sound-1_0-1/physfs added MPlayer/libmpg123-0/libSDL_sound-1_0-1/physfs-devel added MPlayer/libmpg123-0/libSDL_sound-1_0-1/physfs-devel/readline-devel added MPlayer/libmpg123-0/libSDL_sound-1_0-1/speex-devel added MPlayer/libmpg123-0/libSDL_sound-devel added MPlayer/libmpg123-0/libmikmod added MPlayer/libmpg123-0/libspeex1 added MPlayer/libmpg123-0/libtalloc2 added MPlayer/libopenal1-soft md5sum libmpg123-0 removed libmpg123-0/libSDL_sound-1_0-1 removed libmpg123-0/libSDL_sound-1_0-1/libmikmod-devel removed libmpg123-0/libSDL_sound-1_0-1/libspeexdsp1 removed libmpg123-0/libSDL_sound-1_0-1/physfs removed libmpg123-0/libSDL_sound-1_0-1/physfs-devel removed libmpg123-0/libSDL_sound-1_0-1/physfs-devel/readline-devel removed libmpg123-0/libSDL_sound-1_0-1/speex-devel removed libmpg123-0/libSDL_sound-devel removed libmpg123-0/libmikmod removed libmpg123-0/libspeex1 removed libmpg123-0/libtalloc2 removed libopenal1-soft How exactly should I read this?? Any documentation? -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-buildservice+help(a)opensuse.org

1 0

[opensuse-buildservice] Add -preempt (amd64) kernel flavor packages into xUbuntu_10.04
by Roman Valov 04 Mar '11

04 Mar '11

Hello, I want to request some packages that should be added into xUbuntu_10.04. Packages: linux-image-preempt_2.6.32.21.22_amd64.deb linux-image-2.6.32-21-preempt_2.6.32-21.32_amd64.deb linux-headers-preempt_2.6.32.21.22_amd64.deb linux-headers-2.6.32-21-preempt_2.6.32-21.32_amd64.deb They're located in the pool/universe repository of the installation cd, unlike other kernel flavors that are localted in main. I also should note that all next versions of this kernel flavor are also located in main repository on archive.ubuntu.com server. Regards, Roman. -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-buildservice+help(a)opensuse.org

1 0

[opensuse-buildservice] using ccache for OBS
by Malcolm Fernandes 04 Mar '11

04 Mar '11

Hi, Is it possible to use ccache for OBS builds. I know that 'osc' has the ability, but I would like to configure it for all builds done via the OBS. I'm using a local OBS instance. If it is possible, what needs to be done? Could not find any configurable parameters in BSConfig.pm or anything related on the OBS web pages. Thanks, Mal -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-buildservice+help(a)opensuse.org

3 5

[opensuse-buildservice] Intermittent trouble using the recompress service
by Claudio Freire 03 Mar '11

03 Mar '11

I got the following error: service recompress failed: /lxc.tmp/inner.sh: line 4: unexpected EOF while looking for matching `"' /lxc.tmp/inner.sh: line 5: syntax error: unexpected end of file Trying to recompress a tar.bz2 file using the "recompress" service in this package: https://build.opensuse.org/package/show?package=vegastrike-extra&project=ho… I clicked "run services now" again, and it worked, so it seems the problem is intermittent. Just a heads up. -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-buildservice+help(a)opensuse.org

2 1