- openSUSE Support

[opensuse-support] Network on Realtek RTL8125 not working
by Jogchum Reitsma 14 Nov '20

14 Nov '20

Ha, Today my son's new Gigabyte Aorus motherboard, with AMD Ryzen 5900 CPU, arrived. Pushing Leap 15.2 on it was a no-brainer, except for the networking interface. The board has a Realtek RTL8125, which is - I did some googling - not supported by the installed kernel (5.3). In 5.9 it should be, I read (https://forums.opensuse.org/showthread.php/540275-How-to-get-ethernet-worki…; which discusses the situation with Tumbleweed). Is it possible to get that kernel for Leap 15.2, and if so, where do I find that? Or another kernel for Leap, which supports this chip? I see https://download.opensuse.org/repositories/home:/Sauerland:/hardware/openSU… Would that one be safe to install, and to get things working? If not, I understand that I have to build my own kernel, something I've never done before.So I would think I run in some difficulties on that road. Any advice appreciated! regards, Jogchum

2 2

[opensuse-support] Re: [opensuse-updates] openSUSE-SU-2020:1906-1: important: Security update for the Linux Kernel
by Ralph 13 Nov '20

13 Nov '20

Hello! That's sloppy. This kernel install done with yast2 fails with a nvidia card, apparently doesn't like the signing key but then doesn't auto-prompt to update/install a mok... Ralph On Fri, 13 Nov 2020 15:14:43 +0100 (CET) opensuse-security(a)opensuse.org wrote: > openSUSE Security Update: Security update for the Linux Kernel > ______________________________________________________________________________ > > Announcement ID: openSUSE-SU-2020:1906-1 > Rating: important > References: #1055014 #1055186 #1061843 #1065600 #1065729 > #1066382 #1077428 #1129923 #1134760 #1149032 > #1152489 #1163592 #1164648 #1166146 #1166166 > #1167030 #1170415 #1174748 #1174969 #1175052 > #1175306 #1175749 #1175898 #1176354 #1176485 > #1176713 #1177086 #1177281 #1177353 #1177410 > #1177411 #1177470 #1177739 #1177749 #1177750 > #1177754 #1177755 #1177765 #1177766 #1177799 > #1177801 #1177814 #1177817 #1177854 #1177855 > #1177856 #1177861 #1178002 #1178079 #1178123 > #1178166 #1178173 #1178175 #1178176 #1178177 > #1178183 #1178184 #1178185 #1178186 #1178190 > #1178191 #1178246 #1178255 #1178307 #1178330 > #1178393 #1178395 #1178461 #1178579 #1178581 > #1178584 #1178585 > Cross-References: CVE-2020-14351 CVE-2020-16120 CVE-2020-25285 > CVE-2020-25656 CVE-2020-25668 CVE-2020-25704 > CVE-2020-8694 > Affected Products: > openSUSE Leap 15.2 > ______________________________________________________________________________ > > An update that solves 7 vulnerabilities and has 65 fixes is > now available. > > Description: > > > > The openSUSE Leap 15.2 kernel was updated to receive various > security and bugfixes. >

1 1

[opensuse-support] Request: KSnapshot Package for openSUSE Leap 15.2 ff
by michael.kasimir＠gmx.de 13 Nov '20

13 Nov '20

Hi, within this e-mail I would like to inquire, if the following package for openSUSE Leap 15.2 ff can be made available: https://software.opensuse.org/package/ksnapshot[1] There is no official package available for openSUSE Leap 15.2 Mit freundlichen Grüßen / Kind regards Michael Kasimir Be Free, Be Linux -------- [1] https://software.opensuse.org/package/ksnapshot

4 3

[opensuse-support] bridge game?
by Doug McGarrett 13 Nov '20

13 Nov '20

Is there a bridge game in the repos? If so, how to access it? If not, anybody want to comment on Proton Mail Bridge, available in rpm format? --doug

2 2

[opensuse-support] Re: [Leap 15] Running a script at startup automatically
by Bob Williams 12 Nov '20

12 Nov '20

Thanks, I'll try that. Sorry I haven't replied sooner. Small problem of my ISP blacklisting opensuse.org for the past 48 hours. BTW This opensuse Leap 15.2 -- Bob Williams System: Linux 5.3.18-lp152.47-default Desktop: KDE Frameworks: 5.71.0, Qt: 5.12.7 and Plasma: 5.18.5 https://useplaintext.email/

2 2

[opensuse-support] LLVM-question
by Axel Braun 12 Nov '20

12 Nov '20

Hi, while uppdating an older TW installation I noticed that libLLVM Versions 7-11 are installed.... (LLVM is a compiler infrastructure designed for compile-time, link-time, runtime, and idle-time optimization of programs from arbitrary programming languages) Is there a reason why older versions are installed? How can I find out which older versions are obsolete? Thanks Axel -- To unsubscribe, e-mail: opensuse-support+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-support+owner(a)opensuse.org

3 3

[opensuse-support] [Leap 15] Running a script at startup automatically
by Bob Williams 11 Nov '20

11 Nov '20

I have a script which starts a multimedia server: /home/bob/Serviio/serviio-2.1/bin/serviio.sh When run in a terminal, it works as expected. When the script is added to Settings > System Settings > Startup and Shutdown > Autostart > Script File, it doesn't. The file is owned by bob and is executable. What voodoo am I missing? -- Bob Williams System: Linux 5.3.18-lp152.47-default Desktop: KDE Frameworks: 5.71.0, Qt: 5.12.7 and Plasma: 5.18.5 https://useplaintext.email/

4 3

[opensuse-support] apache.log entries stopped 48 hours ago
by Felix Miata 09 Nov '20

09 Nov '20

My WAN IP changed recently. I know not when. I updated my DNS service to the new IP several hours ago, but my web site is still timing out, as is trying to reach it via my router's WAN IP. Update never took more than a few minutes to propagate before. Could something have changed in apache2 that didn't take effect right away? Last zypper up was 03 November @05:09. Apache2 log entries stopped 6 November @00:14. Last apache2 entry I see in zypper's history was on 2 November @23:33. # systemctl status apache2 ● apache2.service - The Apache Webserver Loaded: loaded (/usr/lib/systemd/system/apache2.service; enabled; vendor preset: disabled) Active: active (running) since Tue 2020-11-03 03:35:01 EST; 4 days ago Main PID: 1098 (httpd-prefork) Status: "Total requests: 0; Current requests/sec: 0; Current traffic: 0 B/sec" Tasks: 11 I called my ISP, who claimed no blame, not blocking port 80. I reset my router, and see nothing awry in its settings, or an available update. Where should I look to troubleshoot this? -- Evolution as taught in public schools, like religion, is based on faith, not on science. Team OS/2 ** Reg. Linux User #211409 ** a11y rocks! Felix Miata *** http://fm.no-ip.com/ -- To unsubscribe, e-mail: opensuse-support+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-support+owner(a)opensuse.org

2 3

[opensuse-support] LaTeX compilation fails with 'mktexfmt [ERROR]: -user mode but path setup is -sys type, bailing out.' - Possible bug?
by Johannes Foerster 09 Nov '20

09 Nov '20

Dear reader, I want to clarify whether this is a bug I should report or just some minor issue I could not resolve on my own. I decided to do this according to [0]. The system I'm using is an installation of openSUSE Tumbleweed with the transactional-update role/pattern from the Kubic project. It is rather fresh - installation medium was the Tumbleweed NET variant 20201024 snapshot. > cat /etc/os-release NAME="openSUSE Tumbleweed" # VERSION="20201107" ID="opensuse-tumbleweed" ID_LIKE="opensuse suse" VERSION_ID="20201107" PRETTY_NAME="openSUSE Tumbleweed" ANSI_COLOR="0;32" CPE_NAME="cpe:/o:opensuse:tumbleweed:20201107" BUG_REPORT_URL="https://bugs.opensuse.org" HOME_URL="https://www.opensuse.org/" DOCUMENTATION_URL="https://en.opensuse.org/Portal:Tumbleweed" LOGO="distributor-logo" I intended to use lualatex(1) from the TeXLive distribution. > latexmk --version Latexmk, John Collins, 17 Apr. 2020. Version 4.69a > lualatex --version This is LuaHBTeX, Version 1.12.0 (TeX Live 2020/TeX Live for SUSE Linux) Execute 'luahbtex --credits' for credits and version details. [snip] Though when I try to compile my document via latexmk(1) I recieve the following error message: mktexfmt [ERROR]: -user mode but path setup is -sys type, bailing out. and latexmk(1) aborts. The compilation fails. Then I did some research which returned [1-2]. Digging deeper I checked the output of the commands suggested in [2]#c4 (i.e. comment 4 of [2]): > kpsewhich language.dat /etc/texmf/tex/generic/config/language.dat > kpsewhich language.dat.lua /etc/texmf/tex/generic/config/language.dat.lua > kpsewhich language.def /etc/texmf/tex/generic/config/language.def > LANG=C sh -c 'find /usr/share/texmf/ -name language.dat.lua \ -or -name language.def \ -or -name language.dat | xargs ls -gl' lrwxrwxrwx 1 root 59 Aug 25 20:05 /usr/share/texmf/tex/generic/config/language.dat -> ../../../../../../etc/texmf/tex/generic/config/language.dat lrwxrwxrwx 1 root 63 Aug 25 20:05 /usr/share/texmf/tex/generic/config/language.dat.lua -> ../../../../../../etc/texmf/tex/generic/config/language.dat.lua lrwxrwxrwx 1 root 59 Aug 25 20:05 /usr/share/texmf/tex/generic/config/language.def -> ../../../../../../etc/texmf/tex/generic/config/language.def > LANG=C ls -l /run/texlive/ ls: cannot access '/run/texlive/': No such file or directory The symptoms look all the same. Then I followed [2]c#13 and ran: > sudo -i # umask 0022 # mkdir /run/texlive # touch /run/texlive/run-{hypen,fmtutil.{language,refresh}} # /usr/share/texmf/texconfig/update I do not have the output of that anymore but it told me that my TeXLive installation was broken and I should try reinstalling certain texlive packages. I figured this might be due to the transactional role (Kubic) and did the same as above but now inside a shell on a rw snapshot via: # transactional-update -d shell This finished successfully. Bug after a reboot the symptoms were still the same. So this workaround did not fix it for me. Can anyone help me trying to fix it or give any suggestions? Is this a bug I should report? This would be my first. Any particular suggestions for reporting it? Thanks in advance and kind regards, Johannes References: [0] - https://en.opensuse.org/index.php?title=openSUSE:Submitting_bug_reports&old… [1] - https://forums.opensuse.org/showthread.php/528778 [2] - https://bugzilla.opensuse.org/show_bug.cgi?id=1074128 -- To unsubscribe, e-mail: opensuse-support+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-support+owner(a)opensuse.org

1 0

[opensuse-support] Request: android-tools Package for openSUSE Leap 15.2 ff
by michael.kasimir＠gmx.de 08 Nov '20

08 Nov '20

Hi, I had started this request in January, 7th 2020: https://lists.opensuse.org/opensuse-support/2020-01/msg00023.html[1] which has been solved by Axel. After upgrading to Leap 15.2 now the problem is, there are no repos available. So, within this e-mail I would like to inquire, if the following package for openSUSE Leap 15.2 ff can be made available: 1) android-tools https://software.opensuse.org/download.html?project=hardware&package=androi… Unfortunately the offered packages are only available for openSUSE Tumbleweed. On the other hand, the second necessary package: 2) android-udev-rules https://software.opensuse.org/download.html?project=hardware&package=androi… is available in different versions as *.src.rpm source package for openSUSE Leap 15.2 ff. I would appreciate to get an answer about this question and any possible further assistance. With kind regards M -------- [1] https://lists.opensuse.org/opensuse-support/2020-01/msg00023.html

2 3