May 2024 - openSUSE Support - openSUSE Mailing Lists

Sound on HP laptop not functioning properly
by Jogchum Reitsma 09 May '24

09 May '24

Hi, This weekend I have bought a HP 17-cp3076nd laptop, and installed Tumbleweed on it. I get no sound from it. If I *hover above* the speaker icon, I see the device that should be active, but if I *click* on it, the message is No devices found. If I go to System settings, there are two audio devices, and if I select the one connected to the laptop speaker, I get the Left-Right test sound OK. The selected device is, as said, visible when one hovers above the speaker icon. The device connected to the laptop speaker is an AMD Family 17h/19h HD audio controller, kernel driver in use snd_hda_intel. Which is reported to be active by lsmod. Any one an idea what goes wrong here? Thanks in advance, regards, Jogchum

2 3

Network configuration is overwritten by kernel "rd.neednet" and "ip" after boot
by Jonas Kvinge 08 May '24

08 May '24

Hi, I'm using the following kernel parameters to enable networking and SSH so the LUKS encrypted root partition can be unlocked remotely in case automatic unlocking fails: net.ifnames=0 rd.neednet=1 ip=192.168.250.20::192.168.250.200:255.255.255.0::eth0:off When the system is booted, it's supposed to use NetworkManager and switch to another IP address, but this does not happen automatically. NetworkManager is connected to a connection named "eth0", which has automatically been created, instead of the actual network connection I've added. Setting a priority on the connection does not make it switch either. I've tried adding a systemd service to reset the network address on the interface before NetworkManager is started, the service is started on boot, but it still uses the eth0 connection with the IP address set by the kernel. The service looks like this: [Unit] Description=Release Network Address Before=network-pre.target [Service] Type=oneshot ExecStart=/usr/local/bin/network-reset.sh [Install] WantedBy=network-pre.target In /usr/local/bin/network-reset.sh I've tried the following: "ip addr del 192.168.250.20 dev eth0" and "ip addr flush eth0" I've also tried "ip link set eth0 down" and "ip link set eth0 up" and various combinations of the above. Redhat has a issue for the same thing here: https://bugzilla.redhat.com/show_bug.cgi?id=1787021 But the solution at https://access.redhat.com/solutions/3017441 seem to be closed to commercial users. Jonas

2 1

Network configuration is overwritten by kernel "rd.neednet" and "ip" after boot
by Jonas Kvinge 08 May '24

08 May '24

Hi, I'm using the following kernel parameters to enable networking and SSH so the LUKS encrypted root partition can be unlocked remotely in case automatic unlocking fails: net.ifnames=0 rd.neednet=1 ip=192.168.250.20::192.168.250.200:255.255.255.0::eth0:off When the system is booted, it's supposed to use NetworkManager and switch to another IP address, but this does not happen automatically. NetworkManager is connected to a connection named "eth0", which has automatically been created, instead of the actual network connection I've added. Setting a priority on the connection does not make it switch either. I've tried adding a systemd service to reset the network address on the interface before NetworkManager is started, the service is started on boot, but it still uses the eth0 connection with the IP address set by the kernel. The service looks like this: [Unit] Description=Release Network Address Before=network-pre.target [Service] Type=oneshot ExecStart=/usr/local/bin/network-reset.sh [Install] WantedBy=network-pre.target In /usr/local/bin/network-reset.sh I've tried the following: "ip addr del 192.168.250.20 dev eth0" and "ip addr flush eth0" I've also tried "ip link set eth0 down" and "ip link set eth0 up" and various combinations of the above. Redhat has a issue for the same thing here: https://bugzilla.redhat.com/show_bug.cgi?id=1787021 But the solution at https://access.redhat.com/solutions/3017441 seem to be closed to commercial users. Jonas

1 0

15.6 rc iso - keyboard layout not respected? english only everywhere.
by cagsm 03 May '24

03 May '24

Support, apparently I am a real noob, the keyboard language layout seems to be english only. even when i chose from the initial grub2 menu a different language alltogether then it switches over to that language in the grub2 menu itself all right back with 15.5 it would then set the keyboard layout all right for the rescue system as well. but not in the 15.6rc iso. when booting into that rescue submenu entry and waiting for rescue too fire up, later right before the rescue login there is that kind of ancient style text mode menu or something where it asks me once more for language settings, and its about keyboard there i think i remember. but even selecting a nonenglish entry there it is still english after the login into root on the console. any way to acutally set a keyboard language during boot? with kernel parameters? or how does this all work? thanks for teaching a noob.

1 1

[TW] tab completion following zypper dup is fubar
by Felix Miata 02 May '24

02 May '24

A common sequence of keystroke events here on vt3: zypper dup zypper --no-refresh se -sx kernel-default kernel-longterm | egrep -v 'srcp|loading|leading' | egrep 'x86_64|noarch' # as script /usr/local/bin/zypsek time rpm -ivh /n<tab> The last line continues into the following without typing anything after <tab>: time rpm -ivh /n-bash: _comp_initialize: command not found This does not occur if after zypper zup I log out, then log back in before running the time rpm -ivh /n<tab> sequence. How can I determine what causes this strange behavior? It started to be a regular occurrence probably in excess of 6 months ago, IIRC, on every TW installation I have, and on Slowrolls. # tail -1 /usr/local/bin/zypsei zypper --no-refresh se -s -i $* | grep -Ev 'debug|devel|srcp|openSUSE-20' | egrep 'x86|noarch'| sort # zypsei pletio i+ | bash-completion | package | 2.12.0-2.2 | noarch | OSS # ls -gGd /nfs drwxr-xr-x 54 1024 Dec 24 2008 /nfs # https://paste.opensuse.org/0db16a461c88 is the last 1,000 lines of /var/log/zypper.log. -- Evolution as taught in public schools is, like religion, based on faith, not based on science. Team OS/2 ** Reg. Linux User #211409 ** a11y rocks! Felix Miata

1 0

Stop messsages from akonadi-server
by Axel Braun 02 May '24

02 May '24

Hi, akonadi spams the journal with messages like akonadiserver[2790]: org.kde.pim.akonadiserver: ItemRetrievalJob for request 18000 finished Any idea how I can stop this? Issues and errors are OK, but not one message per..fetch (or whatever that wants to tell me) Thanks Axel

1 0