August 2023 - openSUSE Support - openSUSE Mailing Lists

[oS-support] update conflict with
by Carlos E. R. 31 Aug '23

31 Aug '23

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 When trying to update Leap 15.5 today I get a conflict: Laicolasse:~ # zypper patch Retrieving repository 'google-chrome' metadata ..................................................................................................................[done] Building repository 'google-chrome' cache .......................................................................................................................[done] Retrieving repository 'Update repository of openSUSE Backports' metadata ........................................................................................[done] Building repository 'Update repository of openSUSE Backports' cache .............................................................................................[done] Retrieving repository 'Update repository with updates from SUSE Linux Enterprise 15' metadata ...................................................................[done] Building repository 'Update repository with updates from SUSE Linux Enterprise 15' cache ........................................................................[done] Loading repository data... Reading installed packages... Resolving package dependencies... Problem: the installed WebKit2GTK-4.1-lang-2.38.6-150400.4.42.4.noarch requires 'WebKit2GTK-4.1 = 2.38.6', but this requirement cannot be provided not installable providers: libwebkit2gtk-4_1-0-2.38.6-150400.4.39.1.x86_64[repo-oss] Solution 1: deinstallation of WebKit2GTK-4.1-lang-2.38.6-150400.4.42.4.noarch Solution 2: do not install patch:openSUSE-SLE-15.5-2023-3419-1.noarch Solution 3: break WebKit2GTK-4.1-lang-2.38.6-150400.4.42.4.noarch by ignoring some of its dependencies Choose from above solutions by number or cancel [1/2/3/c/d/?] (c): d Problem: the installed WebKit2GTK-4.1-lang-2.38.6-150400.4.42.4.noarch requires 'WebKit2GTK-4.1 = 2.38.6', but this requirement cannot be provided not installable providers: libwebkit2gtk-4_1-0-2.38.6-150400.4.39.1.x86_64[repo-oss] Detailed information: the to be installed WebKit2GTK-4.1-lang-2.38.6-150400.4.42.4.noarch requires 'WebKit2GTK-4.1 = 2.38.6', but this requirement cannot be provided the installed WebKit2GTK-4.1-lang-2.38.6-150400.4.42.4.noarch requires 'WebKit2GTK-4.1 = 2.38.6', but this requirement cannot be provided the to be installed patch:openSUSE-SLE-15.5-2023-3419-1.noarch conflicts with 'libwebkit2gtk-4_1-0.x86_64 < 2.40.5-150400.4.45.3' provided by the to be installed libwebkit2gtk-4_1-0-2.38.6-150400.4.39.1.x86_64 the to be installed patch:openSUSE-SLE-15.5-2023-3419-1.noarch conflicts with 'libwebkit2gtk-4_1-0.x86_64 < 2.40.5-150400.4.45.3' provided by the to be installed libwebkit2gtk-4_1-0-2.38.6-150400.4.42.4.x86_64 the to be installed patch:openSUSE-SLE-15.5-2023-3419-1.noarch conflicts with 'libwebkit2gtk-4_1-0.x86_64 < 2.40.5-150400.4.45.3' provided by the installed libwebkit2gtk-4_1-0-2.38.6-150400.4.42.4.x86_64 Solution 1: deinstallation of WebKit2GTK-4.1-lang-2.38.6-150400.4.42.4.noarch Solution 2: do not install patch:openSUSE-SLE-15.5-2023-3419-1.noarch Solution 3: break WebKit2GTK-4.1-lang-2.38.6-150400.4.42.4.noarch by ignoring some of its dependencies Choose from above solutions by number or cancel [1/2/3/c/d/?] (c): 2 Resolving dependencies... Resolving package dependencies... Nothing to do. Laicolasse:~ # - -- Cheers Carlos E. R. (from openSUSE Leap 15.5 at Laicolasse) -----BEGIN PGP SIGNATURE----- iHoEARECADoWIQQZEb51mJKK1KpcU/W1MxgcbY1H1QUCZPC9NBwccm9iaW4ubGlz dGFzQHRlbGVmb25pY2EubmV0AAoJELUzGBxtjUfVbuMAnjqzQYDUl58cggLpJyvd zVn8UniwAJ0VWZrRpvBWcOzWHf+EYMUew6uyHA== =Pe2y -----END PGP SIGNATURE-----

3 4

Latest Chrome update
by Mark D. Neidorff 28 Aug '23

28 Aug '23

I installed the latest Google Chrome update into 15.4 and found the following: Google Chrome and Thunderbird can not be open at the same time (seems to be a video problem because the screen is corner to corner black. I guess that it is redundant, but I get a black screen when I open a second Chrome window. Any ideas on resolving this, besides reverting Thank you, Mark -- The biggest mistake you can make is to be right.

3 3

Charset problem in Tumbleweed installer
by Bjoern Voigt 28 Aug '23

28 Aug '23

The current version of the openSUSE Tumbleweed network installer ISO (openSUSE-Tumbleweed-NET-x86_64-Snapshot20230823-Media.iso) shows an encoding error. The automatic partitioning shows a "?" instead of the "ü" in the German "für" word. Björn

1 0

WebKit2GTK-4.0-lang-2.38.6-150400.4.42.4.noarch requires 'WebKit2GTK-4.0 = 2.38.6', but this requirement cannot be provided
by Till Dörges 25 Aug '23

25 Aug '23

Hello all, on several fully patched standard openSUSE Leap 15.4 systems I'm seeing the above error when running 'zypper up -t patch'. The error is mentioned here https://bugzilla.opensuse.org/show_bug.cgi?id=1210985#c9 but it looks a bit like some dependencies were messed up (rather than a mirror sync issue). Does anybody have any more insight? --- snip --- os154:~ # lsb_release -d Description: openSUSE Leap 15.4 os154:~ # zypper ref [...] All repositories have been refreshed. os154:~ # zypper up -t patch [...] Problem: the installed WebKit2GTK-4.0-lang-2.38.6-150400.4.42.4.noarch requires 'WebKit2GTK-4.0 = 2.38.6', but this requirement cannot be provided not installable providers: libwebkit2gtk-4_0-37-2.36.0-150400.2.13.x86_64[openSUSE-Leap] libwebkit2gtk-4_0-37-2.36.3-150400.4.3.1.x86_64[repo-sle-update] libwebkit2gtk-4_0-37-2.36.4-150400.4.6.2.x86_64[repo-sle-update] libwebkit2gtk-4_0-37-2.36.5-150400.4.9.1.x86_64[repo-sle-update] libwebkit2gtk-4_0-37-2.36.7-150400.4.12.1.x86_64[repo-sle-update] libwebkit2gtk-4_0-37-2.36.8-150400.4.15.1.x86_64[repo-sle-update] libwebkit2gtk-4_0-37-2.38.2-150400.4.22.1.x86_64[repo-sle-update] libwebkit2gtk-4_0-37-2.38.3-150400.4.25.1.x86_64[repo-sle-update] libwebkit2gtk-4_0-37-2.38.5-150400.4.34.2.x86_64[repo-sle-update] libwebkit2gtk-4_0-37-2.38.6-150400.4.39.1.x86_64[repo-sle-update] Solution 1: deinstallation of WebKit2GTK-4.0-lang-2.38.6-150400.4.42.4.noarch Solution 2: do not install patch:openSUSE-SLE-15.4-2023-3419-1.noarch Solution 3: break WebKit2GTK-4.0-lang-2.38.6-150400.4.42.4.noarch by ignoring some of its dependencies Choose from above solutions by number or cancel [1/2/3/c/d/?] (c): --- snp --- Thanks and regards -- Till -- Dipl.-Inform. Till Dörges doerges(a)pre-sense.de PRESENSE Technologies GmbH Nagelsweg 41, D-20097 HH Geschäftsführer/Managing Directors AG Hamburg, HRB 107844 Till Dörges, Jürgen Sander USt-IdNr.: DE263765024 Dieses Jahr sind wir wieder auf der *it-sa* in Nürnberg: 10.-12. Oktober 2023, Halle 7, Stand 227 https://www.itsa365.de/de-de/companies/p/presense-technologies-gmbh Wir freuen uns auf Ihren Besuch!

2 1

dolphinsu delay
by JJM de Faber 25 Aug '23

25 Aug '23

When using dolphin as root (dolphinsu) there is always a delay of 30 seconds before an action takes place. It doesn't mather what action,delete,rename or whatever. Is this intentional or an error in my config ? Where is it defined ?

6 11

Fwd: Re: dolphinsu delay
by JJM de Faber 23 Aug '23

23 Aug '23

On 2023-08-23 15:19, Andrei Borzenkov wrote: > On Wed, Aug 23, 2023 at 4:13 PM JJM de Faber<hans.defaber(a)gmail.com> wrote: >> When using dolphin as root (dolphinsu) there is always a delay of 30 >> seconds before an action takes place. >> >> It doesn't mather what action,delete,rename or whatever. >> >> Is this intentional or an error in my config ? >> > It probably tries to contact something and times out. You could strace > it to see what happens. > >> Where is it defined ? I have no expertise with strace and debugging dbus logins. I did something different, i did a fresh install of Leap 15.5 on a empty partition. It gives exactly the same problem. I created a textfile, started dolphinsu and opened the textfile with kate it toke a bit more than 20 seconds when the empty textfile apears. It happens only the very first command after start of dolphinsu, the second command starts immediately. It looks like a bug.

1 0

moving /home content over to a different disk - how to?
by cagsm 23 Aug '23

23 Aug '23

Support, trying to move the content of (almost whole) /home over to a different physical disk. I only have remote access and can only ssh into the machine. Doesnt this get me into trouble of some? locked? files of this user i am sshing with into the users account on this machine? can I su - and then still unmount whole /home and move it over to a different partition on a different disk? what tools do do this best? like rsync? some kind of mirror parameters? any hints appreciated. thanks for having me.

4 5

Leap-15.5-h264-simplescreenrecorder
by bent fender 23 Aug '23

23 Aug '23

SSR-0.4.4-bp155.1.12 is complaining that H264 is not installed but everything with 'h264' OR 'codec' in it IS installed.

2 3

Lost Tumbleweed sound
by bent fender 23 Aug '23

23 Aug '23

I had two Asus Xonar sound cards: a main battlewagon Xonar-STX-II and a standby also ePCI Xonar which apparently uses a usb chip and so lists under lsusb but not lspci. The former one finally crapped out so it's gone in the recyle bin. The transgender USB one lists under Leap-15.5 and TW the same way but no sound works in TW and PAVU control goes into perpetual "Establishing connection to pulse audio. PLease wait." (Pulse is installed to both updated systems). What can I do? ============================================ Leap-15.5 # aplay --list-devices **** List of PLAYBACK Hardware Devices **** card 1: CARD [XONAR SOUND CARD], device 0: USB Audio [USB Audio] Subdevices: 0/1 Subdevice #0: subdevice #0 card 1: CARD [XONAR SOUND CARD], device 1: USB Audio [USB Audio #1] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: CARD [XONAR SOUND CARD], device 2: USB Audio [USB Audio #2] Subdevices: 1/1 Subdevice #0: subdevice #0 tw # aplay --list-devices **** List of PLAYBACK Hardware Devices **** card 0: CARD [XONAR SOUND CARD], device 0: USB Audio [USB Audio] Subdevices: 0/1 Subdevice #0: subdevice #0 card 0: CARD [XONAR SOUND CARD], device 1: USB Audio [USB Audio #1] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: CARD [XONAR SOUND CARD], device 2: USB Audio [USB Audio #2] Subdevices: 1/1 Subdevice #0: subdevice #0 Leap-15.5 # lsusb Bus 007 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 011 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 010 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 002: ID 13b1:003e Linksys AE6000 802.11a/b/g/n/ac Wireless Adapter [MediaTek MT7610U] Bus 006 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 009 Device 002: ID 046d:c062 Logitech, Inc. M-UAS144 [LS1 Laser Mouse] Bus 009 Device 001: ID 1d6b: 0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 008 Device 002: ID 2f68:0082 Hoksi Technology DURGOD Taurus K320 Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 004 Device 002: ID 0b05:180f ASUSTek Computer, Inc. XONAR SOUND CARD Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub TW # lsusb Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 011 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 010 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 002: ID 13b1:003e Linksys AE6000 802.11a/b/g/n/ac Wireless Adapter [MediaTek MT7610U] Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 009 Device 002: ID 046d:c062 Logitech, Inc. M-UAS144 [LS1 Laser Mouse] Bus 009 Device 001: ID 1d6b: 0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 002: ID 2f68:0082 Hoksi Technology DURGOD Taurus K320 Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 008 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 007 Device 002: ID 0b05:180f ASUSTek Computer, Inc. XONAR SOUND CARD Bus 007 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 006 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

2 7

LC_ in TW environment
by Felix Miata 22 Aug '23

22 Aug '23

This arose because I recently have been seeing unexpected characters replacing box drawing characters in MC and various utility output, e.g. systemd-analyze critical-chain # set | grep LC_ | wc -m 1950 # set | grep LC_ makes what amounts to a lot of litter, apparently including few or no line feeds. On a vtty login: # locale LANG=POSIX LC_CTYPE=en_US.UTF-8 LC_NUMERIC="POSIX" LC_TIME="POSIX" LC_COLLATE="POSIX" LC_MONETARY="POSIX" LC_MESSAGES="POSIX" LC_PAPER="POSIX" LC_NAME="POSIX" LC_ADDRESS="POSIX" LC_TELEPHONE="POSIX" LC_MEASUREMENT="POSIX" LC_IDENTIFICATION="POSIX" LC_ALL= # In Plasma in XTerm or Konsole: # locale LANG=POSIX LC_CTYPE=POSIX LC_NUMERIC="POSIX" LC_TIME="POSIX" LC_COLLATE="POSIX" LC_MONETARY="POSIX" LC_MESSAGES="POSIX" LC_PAPER="POSIX" LC_NAME="POSIX" LC_ADDRESS="POSIX" LC_TELEPHONE="POSIX" LC_MEASUREMENT="POSIX" LC_IDENTIFICATION="POSIX" LC_ALL= # 1-why the difference? 2-is there a "correct" set of values for someone who reads, writes and understands only English? 3-Do root's default values normally differ from other users? 4-what initializes the values? 5-what's an ideal or optimal way to deviate from any of the defaults: A: per user? B: globally? -- Evolution as taught in public schools is, like religion, based on faith, not based on science. Team OS/2 ** Reg. Linux User #211409 ** a11y rocks! Felix Miata

5 6