February 2023 - openSUSE Support - openSUSE Mailing Lists

Re: '-D' option of diff 3.9 - #ifdef directives missing
by Robert Webb 10 Feb '23

10 Feb '23

On Fri, 10 Feb 2023 14:10:35 +0100, Axel Braun <docb(a)opensuse.org> wrote: > Am Freitag, 10. Februar 2023, 00:58:01 CET schrieb Robert Webb: >> Hi, >> There has been no response to my bug report at: >> https://debbugs.gnu.org/cgi/bugreport.cgi?bug=61193 >> >> Can anyone else at least confirm this problem (on Tumbleweed)? >> The output from 'diff -D' (v3.9) is missing the '#ifdef' directives. >> Version 3.8 of diff works ok, so it may be fine on Leap. >> >> The following creates a file 'c', and diffs it with a couple lines >> deleted, using three different options. >> >> diff -v |grep diff >> seq 5 > c >> for OPT in '' '-D ZZZ' '-u' ;do >> printf '\n=== diff %s\n' "$OPT" >> sed 2,3d c |diff $OPT c - >> done > > Is this what you are looking for? > > docb@X1E:/tmp> diff -v |grep diff > *diff* (GNU *diff*utils) 3.9 > docb@X1E:/tmp> seq 5 > c > docb@X1E:/tmp> for OPT in '' '-D ZZZ' '-u' ;do >> printf '\n=== diff %s\n' "$OPT" >> sed 2,3d c |diff $OPT c - >> done > > === diff > 2,3d1 > < 2 > < 3 > > === diff -D ZZZ > 1 > 2 > 3 > 4 > 5 Thanks, Axel. Yes, it is the same as my results - no #ifdef directives. The correct output for the -D option, as from version 3.8, is: === diff -D ZZZ 1 #ifndef ZZZ 2 3 #endif /* ! ZZZ */ 4 5 > === diff -u > --- c 2023-02-10 14:08:17.055916079 +0100 > +++ - 2023-02-10 14:08:18.933093494 +0100 > @@ -1,5 +1,3 @@ > 1 > -2 > -3 > 4 > 5 I am going to add this pass/fail test to the bug report: #!/bin/bash diff -D AAAA /dev/null <(echo A) \ |cmp - <(printf '%s\n' '#ifdef AAAA' A '#endif /* AAAA */') -- Robert Webb

1 0

'-D' option of diff 3.9 - #ifdef directives missing
by Robert Webb 09 Feb '23

09 Feb '23

Hi, There has been no response to my bug report at: https://debbugs.gnu.org/cgi/bugreport.cgi?bug=61193 Can anyone else at least confirm this problem (on Tumbleweed)? The output from 'diff -D' (v3.9) is missing the '#ifdef' directives. Version 3.8 of diff works ok, so it may be fine on Leap. The following creates a file 'c', and diffs it with a couple lines deleted, using three different options. diff -v |grep diff seq 5 > c for OPT in '' '-D ZZZ' '-u' ;do printf '\n=== diff %s\n' "$OPT" sed 2,3d c |diff $OPT c - done -- Robert Webb

1 0

Problems with Gnome in Leap 15.4
by Patrick Headley 09 Feb '23

09 Feb '23

These issues only seem to be present on new installations of Leap 15.4. Upgrades from 15.3 don't seem to be affected. Using Gnome 41.8. The greeter doesn't show domain logins in the list. Under certain circumstances the names will appear, or at least the user name I use appears. Locking the screen doesn't allow the screen to turn off. Power settings are set to turn off the display after 15 minutes. When logging in after the screen has been locked, any open applications on monitor 2 move to monitor 1. Hope these issues can be resolved in Leap 15.4.

1 0

Testing 15.5 - MATE Desktop no longer there.
by Larry Len Rainey 09 Feb '23

09 Feb '23

1 0

Where to actually report a bug??
by Adam Majer 09 Feb '23

09 Feb '23

Hi all, So, welcome to a frustrating Wednesday morning. I came across a bug where there is an "Ajax error" going to http://download.opensuse.org/repositories/multimedia:/libs:/cisco-openh264/ with a popup, DataTables warning: table id=data - Ajax error. For more information about this error, please see http://datatables.net/tn/7 At this point I wanted to report a bug. Easy. There is even a Link at the bottom that says "Report issue". And that just goes to bugzilla. So now the hunt starts -- which category? The MirrorCache link said nothing about category. The only thing with "download" in the description, ends up with microfocus.com email..... Anyone know what category bugs for MirrorCache should be filed? And shouldn't this information be, at very least, part of the link? Thanks, Adam

4 4

[TW] boot can't find / on mdraid1
by Felix Miata 06 Feb '23

06 Feb '23

sda3 and nvme0n1p3 both contain exactly the same kernel and initrd. When booting via Grub2-efi on nvme0n1p3 (ESP), boot succeeds. :) # grep -A3 RAID custom.cfg menuentry "RAID md3 TW curkernel" { search --no-floppy --set=root --hint-bios=hd0,gpt3 --label pi3p03res linux /boot/vmlinuz-tw root=LABEL=1md11root3 noresume ipv6.disable=1 net.ifnames=0 mitigations=auto video=1440x900@60 initrd /boot/initrd-tw # cat /proc/cmdline BOOT_IMAGE=/boot/vmlinuz-tw root=LABEL=1md11root3 rd.hostonly=0 noresume ipv6.disable=1 net.ifnames=0 mitigations=auto video=1440x900@60 rd.auto=1 rd.timeout=99 rd.shell 3 When booting via Grub1 on sda1, /dev/disk/by-label/1md11root3 never times out, so no boot, and no rdsosreport.txt, unless I remember rd.timeout=. :( # grep root3 /disks/boot1/grub/menu.lst | head -1 kernel /boot/vmlinuz-tw root=LABEL=1md11root3 rd.hostonly=0 noresume ipv6.disable=1 net.ifnames=0 mitigations=auto consoleblank=0 vga=791 video=1440x900@60 3 systemd.debug-shell=1 In the emergency shell, lsmod shows neither raid1 nor md_mod got loaded. If I butcher a boot from ESP by making the root= invalid, but with rd.timeout=### getting me into the rescue shell, raid1 is the 3rd listed module, while md_mod shows up in the middle shortly before nvme. Adding to cmdline modules_load=md_mod,raid1 get them loaded, by doesn't cause any apparent improvement. I can't tell if there's anything helpful in rdsosreport.txt: https://paste.opensuse.org/pastes/de99a98a9def # lsinitrd initrd | egrep 'efi|ata|raid|md_mod|mdadm' mdraid -rw-rw-r-- 49 Feb 5 23:17 etc/cmdline.d/90mdraid.conf -rw-r--r-- 954 Feb 10 2015 etc/mdadm.conf -rwxr-xr-x 156 Jan 25 10:55 usr/lib/dracut/hooks/cleanup/99-mdraid-needshutdown.sh -rwxr-xr-x 701 Jan 25 10:55 usr/lib/dracut/hooks/pre-mount/10-mdraid-waitclean.sh -rw-r--r-- 230 Feb 2 04:30 usr/lib/modprobe.d/50-blacklist-pata_acpi.conf -rw-r--r-- 69 Feb 2 04:30 usr/lib/modprobe.d/70-softdep-ata_piix.conf -rw-r--r-- 7668 Dec 10 16:31 usr/lib/modules/6.0.12-1-default/kernel/crypto/async_tx/async_raid6_recov.ko.zst -rw-r--r-- 6245 Dec 10 16:31 usr/lib/modules/6.0.12-1-default/kernel/crypto/async_tx/raid6test.ko.zst drwxr-xr-x 0 Feb 5 23:17 usr/lib/modules/6.0.12-1-default/kernel/drivers/ata -rw-r--r-- 14431 Dec 10 16:31 usr/lib/modules/6.0.12-1-default/kernel/drivers/ata/ata_piix.ko.zst -rw-r--r-- 36881 Dec 10 16:31 usr/lib/modules/6.0.12-1-default/kernel/drivers/md/raid1.ko.zst -rw-r--r-- 5433 Dec 10 16:31 usr/lib/modules/6.0.12-1-default/kernel/drivers/pinctrl/intel/pinctrl-lakefield.ko.zst drwxr-xr-x 0 Feb 5 23:17 usr/lib/modules/6.0.12-1-default/kernel/fs/efivarfs -rw-r--r-- 12198 Dec 10 16:31 usr/lib/modules/6.0.12-1-default/kernel/fs/efivarfs/efivarfs.ko.zst drwxr-xr-x 0 Feb 5 23:17 usr/lib/modules/6.0.12-1-default/kernel/lib/raid6 -rw-r--r-- 87902 Dec 10 16:31 usr/lib/modules/6.0.12-1-default/kernel/lib/raid6/raid6_pq.ko.zst -rw-r--r-- 512 Jan 4 12:39 usr/lib/systemd/system/mdadm-grow-continue@.service -rw-r--r-- 241 Jan 4 12:39 usr/lib/systemd/system/mdadm-last-resort@.service -rw-r--r-- 179 Jan 4 12:39 usr/lib/systemd/system/mdadm-last-resort@.timer -rwxr-xr-x 18608 Feb 2 15:06 usr/lib/udev/ata_id -rw-r--r-- 2456 Jan 4 12:39 usr/lib/udev/rules.d/63-md-raid-arrays.rules -rw-r--r-- 1358 Feb 5 23:17 usr/lib/udev/rules.d/64-md-raid-assembly.rules -rwxr-xr-x 623888 Jan 4 12:39 usr/sbin/mdadm -rwxr-xr-x 503 Jan 25 10:55 usr/sbin/mdraid-cleanup -rwxr-xr-x 1862 Jan 25 10:55 usr/sbin/mdraid_start # grep /etc/fstab # selected/relevant lines LABEL=pny5p03res /boot ext2 noatime,noauto 0 0 LABEL=realboot1r1 /disks/boot1 ext2 noatime,nofail 0 0 LABEL=1md11root3 / ext4 noatime 0 1 LABEL=1md15home /home ext4 noatime 0 2 LABEL=realboot1r2 /disks/boot2 ext2 noatime,noauto 0 0 # cat mdadm.conf # relevant lines HOMEHOST <ignore> DEVICE containers partitions ARRAY /dev/md3 metadata=1.0 UUID=b094eaa5:ab63fb5c:f6bcaadf:aecea6f4 ARRAY /dev/md7 metadata=1.0 UUID=99e63933:08e751a8:696eaad0:1fad1e7e # lsblk -f # relevant lines NAME FSTYPE FSVER LABEL UUID FSAVAIL FSUSE% MOUNTPOINTS ├─sdb11 linux_raid_member 1.0 srv10:mdroot3 b094eaa5-ab63-fb5c-f6bc-aadfaecea6f4 │ └─md122 ext4 1.0 1md11root3 ab936b4e-dada-48de-9a45-ae6d2b47c5a6 9.8G 37% / ├─sdb15 linux_raid_member 1.0 srv10:md-home 99e63933-08e7-51a8-696e-aad01fad1e7e │ └─md127 ext4 1.0 1md15home 2e3de98b-ed32-4224-8761-a954d2e0ae27 101.1G 29% /home # cat /etc/dracut.conf.d/*.conf | grep -v ^# persistent_policy="by-label" add_drivers+=" ata_piix libata raid1 md_mod nvme scsi_mod " compress="xz" hostonly="yes" mdadmconf="yes" omit_drivers+=" i18n uefi-lib encryptfs btrfs iscsi lvm lvm2 dmraid plymouth resume sata_sil usb_storage " # lsinitrd initrd | egrep 'ata_piix|libata|raid1|md_mod|nvme|scsi_mod' -rw-r--r-- 1 root root 69 Feb 2 04:30 usr/lib/modprobe.d/70-softdep-ata_piix.conf -rw-r--r-- 1 root root 14431 Dec 10 16:31 usr/lib/modules/6.0.12-1-default/kernel/drivers/ata/ata_piix.ko.zst -rw-r--r-- 1 root root 36881 Dec 10 16:31 usr/lib/modules/6.0.12-1-default/kernel/drivers/md/raid1.ko.zst drwxr-xr-x 3 root root 0 Feb 6 01:11 usr/lib/modules/6.0.12-1-default/kernel/drivers/nvme drwxr-xr-x 2 root root 0 Feb 6 01:11 usr/lib/modules/6.0.12-1-default/kernel/drivers/nvme/host -rw-r--r-- 1 root root 124109 Dec 10 16:31 usr/lib/modules/6.0.12-1-default/kernel/drivers/nvme/host/nvme-core.ko.zst -rw-r--r-- 1 root root 40703 Dec 10 16:31 usr/lib/modules/6.0.12-1-default/kernel/drivers/nvme/host/nvme.ko.zst # lsmod | egrep 'nvme|ata|mdadm|md_mod|raid' raid1 57344 10 md_mod 204800 7 raid1 nvme 61440 10 nvme_core 172032 11 nvme # df -h | egrep ' /$|boot' /dev/md126 18G 6.6G 9.8G 41% / /dev/nvme0n1p3 386M 204M 182M 53% /boot /dev/sda3 388M 282M 86M 77% /disks/boot1 # ls /dev/md* /dev/md118 /dev/md119 /dev/md120 /dev/md121 /dev/md122 /dev/md123 /dev/md124 /dev/md125 /dev/md126 /dev/md127 /dev/md: srv10:md-home srv10:md-isos srv10:md-pub srv10:md-srv srv10:md-tmp srv10:md-usrl srv10:mdroot1 srv10:mdroot2 srv10:mdroot3 srv10:mdroot4 # Why aren't libata, ata_pii2 or scsi_mod loading? Why aren't the md3 & md7 device names from /etc/mdadm.conf found in /dev/? What am I not seeing or doing that needs doing for boot from sda3 to find the md3 / filesystem? On the disk pair containing all RAID devices, 15.4's /boot/ directory on / contains all customary files, and boots normally from Grub1 on sda3. The primary difference is TW has an empty /boot/ on the / filesystem due to the presence of sda3 which gets mounted there and contains the boot files. Both use the exact same /etc/mdadm.conf file content. -- Evolution as taught in public schools is, like religion, based on faith, not based on science. Team OS/2 ** Reg. Linux User #211409 ** a11y rocks! Felix Miata

2 2

Got this in todays Tumbleweed update
by Larry Len Rainey 04 Feb '23

04 Feb '23

4 5

error message from pipewire - should I raise a bug or what does it complain about?
by Stakanov 02 Feb '23

02 Feb '23

> feb 02 01:34:57 linux.fritz.box pipewire[2585]: spa.v4l2: '/dev/video0' > VIDIOC_ENUM_FRAMESIZES: ioctl not appropriate for the device This error is in the logs about two times during one session and always after a boot. Not understanding what it complains about I wanted to ask what it is actually complaining about... Do I have a hardware error, a mainboard problem, a soundcard issue or a graphics problem? If anybody knows and can tell me how to fix the issue I will be grateful. S.

1 0

Re: how to firmwareupdate samsung nvme ssm (ssd) via already installed opensuse?
by cagsm 02 Feb '23

02 Feb '23

On Wed, Feb 1, 2023 at 6:12 PM Manfred Schwarb <manfred99(a)gmx.ch> wrote: > > Am 01.02.23 um 17:49 schrieb cagsm: > > Support, > > > > there is some new firmware update for some samsung ssd (nvme ssm pcie > > based) that is built into this system i use. I dont have windows to > > upgrade that nvme samsung device and i can not really move this device > > over to a windows machine and attempt the firmware update there. > > > > you don't need something fancy: > > > #---firmware from https://www.samsung.com/semiconductor/minisite/ssd/download/tools/ > #---first unmount SSD before proceeding > sudo mount -o loop /root/Firmware/Samsung_SSD_980_PRO_5B2QGXA7.iso /mnt > > destdir="/var/tmp/fwupdate" # not on SSD, of course! > mkdir "$destdir" > cd "$destdir" > gzip -dc /mnt/initrd | cpio -idvm --no-absolute-filenames > > #---create chroot env: > mount --bind /proc $destdir/proc > mount --bind /dev $destdir/dev > mount --bind /sys $destdir/sys > mount --bind /run $destdir/run > > env SHELL=/bin/sh chroot "$destdir" > > #---inside chroot: > cd root/fumagician > ./fumagician > exit > > #---cleanup afterwards, umount etc. thanks for these instructions, I kind of used an ubuntu usb key to boot this machine offline and then managed to upgrade the firmware there similar to your commands, only not inside chroot it seems. inside chroot it didnt detect any samsung devices. outside of the jail with sudo it did find the samsung nvme though. the firmware update process was more like a brief glimpse of text or so, and it didnt really print out if successful or if it did anything at all. only after the boot into opensuse did it show that the nvme is now on the new firmware release. thanks again.

2 1

how to firmwareupdate samsung nvme ssm (ssd) via already installed opensuse?
by cagsm 02 Feb '23

02 Feb '23

Support, there is some new firmware update for some samsung ssd (nvme ssm pcie based) that is built into this system i use. I dont have windows to upgrade that nvme samsung device and i can not really move this device over to a windows machine and attempt the firmware update there. i found some older discussions and even runthroughs about this matter, as apparently samsung does offer linux based iso images that apply the firmware for people outside the windows world. but they dont use these fancy fwupd or those tools and apis, but their own specialties and proprietary way to talk to the device. but all from a linux bootable iso. but apparently that linux is dated and old and has all sorts of problems from needing an intel based storage controllers for sata for example and ps2 keyboard layers only and all weird stuff. > <https://blog.quindorian.org/2021/05/firmware-update-samsung-ssd-in-linux.ht…> and similar links and discussions what runlevel or special way to boot the system would be best to be able to run these linux console tools and to not block the nvme device at all after some simple basic bootup of opensuse 15.4? maybe some safe mode or fallback in the opensuse grub2 menu? the original iso on an usb key cant be booted on this dang machine it can disable secureboot but the samsung linux will never show any screen output and never goes anywhere beyond a black screen. this machine also apparently can only uefi, but no csm or bios way to boot. additionally I also read about nvme-cl tool and even found some github project on collecting or sharing samsung firmware in .bin files but I wonder where they get those from as I never found any inside iso or the initrds etc. > <https://github.com/lolyinseo/samsung-nvme-firmware/tree/main/980%20PRO/Sams…> > <https://github.com/lolyinseo/samsung-nvme-firmware> ty.

2 2

Fwd: how to firmwareupdate samsung nvme ssm (ssd) via already installed opensuse?
by Manfred Schwarb 01 Feb '23

01 Feb '23

once again hit the wrong button, sorry. -------- Weitergeleitete Nachricht -------- Betreff: Re: how to firmwareupdate samsung nvme ssm (ssd) via already installed opensuse? Datum: Wed, 1 Feb 2023 18:12:19 +0100 Von: Manfred Schwarb <manfred99(a)gmx.ch> An: cagsm <cumandgets0mem00f(a)gmail.com> Am 01.02.23 um 17:49 schrieb cagsm: > Support, > > there is some new firmware update for some samsung ssd (nvme ssm pcie > based) that is built into this system i use. I dont have windows to > upgrade that nvme samsung device and i can not really move this device > over to a windows machine and attempt the firmware update there. > you don't need something fancy: #---firmware from https://www.samsung.com/semiconductor/minisite/ssd/download/tools/ #---first unmount SSD before proceeding sudo mount -o loop /root/Firmware/Samsung_SSD_980_PRO_5B2QGXA7.iso /mnt destdir="/var/tmp/fwupdate" # not on SSD, of course! mkdir "$destdir" cd "$destdir" gzip -dc /mnt/initrd | cpio -idvm --no-absolute-filenames #---create chroot env: mount --bind /proc $destdir/proc mount --bind /dev $destdir/dev mount --bind /sys $destdir/sys mount --bind /run $destdir/run env SHELL=/bin/sh chroot "$destdir" #---inside chroot: cd root/fumagician ./fumagician exit #---cleanup afterwards, umount etc. > i found some older discussions and even runthroughs about this matter, > as apparently samsung does offer linux based iso images that apply the > firmware for people outside the windows world. but they dont use these > fancy fwupd or those tools and apis, but their own specialties and > proprietary way to talk to the device. but all from a linux bootable > iso. > > but apparently that linux is dated and old and has all sorts of > problems from needing an intel based storage controllers for sata for > example and ps2 keyboard layers only and all weird stuff. > >> <https://blog.quindorian.org/2021/05/firmware-update-samsung-ssd-in-linux.ht…> > and similar links and discussions > > what runlevel or special way to boot the system would be best to be > able to run these linux console tools and to not block the nvme device > at all after some simple basic bootup of opensuse 15.4? maybe some > safe mode or fallback in the opensuse grub2 menu? > > the original iso on an usb key cant be booted on this dang machine it > can disable secureboot but the samsung linux will never show any > screen output and never goes anywhere beyond a black screen. this > machine also apparently can only uefi, but no csm or bios way to boot. > > additionally I also read about nvme-cl tool and even found some github > project on collecting or sharing samsung firmware in .bin files but I > wonder where they get those from as I never found any inside iso or > the initrds etc. > >> <https://github.com/lolyinseo/samsung-nvme-firmware/tree/main/980%20PRO/Sams…> >> <https://github.com/lolyinseo/samsung-nvme-firmware> > > ty.

1 0