December 2021 - openSUSE Support - openSUSE Mailing Lists

how to prevent /etc/profile.d/ files from returning
by David T-G 13 Apr '22

13 Apr '22

Hi, all -- I'm running Leap 15.2 (and this has been happening for a while), and after a round of updates I have to go back to /etc/profile.d and wipe out files that I don't want (alias.bash + ls.bash in particular). Different from adding my own run commands to profile.local.sh thereunder, I want to NOT get the stock stuff. Is there any way to keep them from being dropped again so that I don't have to deal with this over and over? *sigh* TIA & HAND :-D -- David T-G See http://justpickone.org/davidtg/email/ See http://justpickone.org/davidtg/tofu.txt

7 14

problems making nvidia video driver work
by Patrick Shanahan 09 Feb '22

09 Feb '22

have been using nvidia cards (and others) forever and had few problems, but maybe getting old is now a problem. have a new dell desktop i7-11700 with onboard intel RodketLake-S GT1 [UHD Graphicks 750] and nVidia GA104 [GeForce rTX 3060 Ti] I entered the bios and configured using the NVidia card rather than Auto. I have installed: kernel-firmware-nvidia 20211027-1.1 libnvidia-container1 1.1.1-4.1 (extra) libnvidia-egl-wayland1 1.1.7-3.1 (recommended) nvidia-computeG05 470.86-49.2 nvidia-gfxG05-kmp-default 470.86_k5.15.1_8-49.4 nvidia-glG05 470.86-49.2 nvidia-texture-tools 2.1.2-2.3 (extra) x11-video-nvidiaG05 470.86-49.2 reboot to runlevel #3 with nomodeset added to kernel boot parameters as root issue: systemctl isolate graphical prompt returns to tty screen but tty7 is blank with blinking cursor upper left I even installed kernel-source packages and tried the "Hard Way" which I used to use, but failed with msg that kernel-source not configured ??? I have spent much tooo much time trying on my own to resolve this. PLEASE help tks, -- (paka)Patrick Shanahan Plainfield, Indiana, USA @ptilopteri http://en.opensuse.org openSUSE Community Member facebook/ptilopteri Photos: http://wahoo.no-ip.org/piwigo paka @ IRCnet freenode What sort of day was it? A day like all days, filled with those events that alter and illuminate our times... all things are as they were then, but were you there?

9 24

KMail Leap 15.3 - unread mails
by Axel Braun 06 Jan '22

06 Jan '22

Hi, I have one PC that still runs Leap, and since the update to Leap 15.3 the number of unread mails as shown in the Kmail overview is some random number that does not match the real number of unread mails (which is usually Zero): [1] Selecting 'Mark read' from the context menu does not work, neither does akonadictl fsck/ vacuum fix the problem. DB backend is Postgres. Any idea what else to try? Cheers Axel -------- [1] Bild1

3 3

TW: Strange messages from Kernel.....
by Axel Braun 31 Dec '21

31 Dec '21

Hi, since some time I receive every now and then strange messages from teh kernel: Message from syslogd@X1E at Dec 21 08:09:04 ... kernel:[22896.715276][ C0] Uhhuh. NMI received for unknown reason 20 on CPU 0. Message from syslogd@X1E at Dec 21 08:09:04 ... kernel:[22896.715282][ C0] Do you have a strange power saving mode enabled? Message from syslogd@X1E at Dec 21 08:09:04 ... kernel:[22896.715283][ C0] Dazed and confused, but trying to continue The Laptop - ThinkPad X1 Extreme running TW - was on low power last night, hibernated, and on shore power since 30 minutes. Power settings are 'standard'. However, my impression is, that on battery mode the Laptop consumes more power than usual. Was there a change in powermanagement recently? Expected: ~ 15W Actual: ~25W It takes 25W with Nvidia Card enabed, according to prime -select, nvidia card is turend off OK, these are already 2 questions, but from the same area. Cheers Axel

4 6

pipewire not providing sound for me
by Patrick Shanahan 27 Dec '21

27 Dec '21

Tumbleweed 20211223 Just noticed when trying to play a youtube video on firefox that I no longer have any sound. I see that pulseaudio is now pipewire but that does not mean much to me. It does seem that sound have failed very recently, last several days. speaker-test -c2 -l5 -twav fails speaker-test -c8 -l5 -twav -D plug:surround71 provides "Front Left" and "Front Right" from my attached speakers speaker-test -c2 -l5 -twav -D hdmi:CARD=NVidia,DEV=1 provides "Front Left" and "Front Right" from my second display (TV). the system tray audio speaker button displays a diagonal red line indicating mute but mute is not selected. does this provide information which will help solve my provlem? tks, -- (paka)Patrick Shanahan Plainfield, Indiana, USA @ptilopteri http://en.opensuse.org openSUSE Community Member facebook/ptilopteri Photos: http://wahoo.no-ip.org/piwigo paka @ IRCnet oftc What sort of day was it? A day like all days, filled with those events that alter and illuminate our times...

6 11

Sound Problem in Leap 15.3
by Robin Klitscher 26 Dec '21

26 Dec '21

This multi-boot machine runs three separate instances of openSUSE - Leap 15.3 (default); Leap 15.2 (deprecated); Tumbleweed (for fun) Each installation uses the KDE Plasma desktop Recently – I can’t say exactly when but in the last few days – I‘ve lost sound in the 15.3 default installation. 15.2 and Tumbleweed remain OK. In each of the three cases including 15.3, KDE’s Audio module in System Settings reports “built-in audio” (from the motherboard), with output analogue stereo. Oddly, perhaps, the Yast sound module shows the soundcard as “not configured” in all three.* What I don’t get is how sound can work without configuring the sound card through YAST in two of the installations but not the third. More particularly, I can’t see what might have changed in the 15.3 installation to stop it working, where it worked until recently. Any suggestions? Preferably in words of one syllable, since I’m a bear of very little brain. ……………….. *Any attempt to recover the situation by configuring the card through YAST in the 15.3 installation returns “An error occurred during the installation of Comet Lake PCH cAVS. The kernel module snd-sof-pci for sound support could not be loaded. This can be caused by incorrect module parameters, including invalid IO or IRQ parameters.” -- Robin K Wellington "Harbour City" New Zealand

1 1

Plasma root dolphin alert colors
by Ben T. Fender 21 Dec '21

21 Dec '21

I don't know if this is a plasma or a suse issue... When user launches dolphin-su a little alert appears, which is a useful flag but I used to have an even better one that could not be just clicked OFF and forgotten. I used to set, as root, a background color of reddish orange so that when any user called dolphin-su that window would be in root's colours. UNFORTUNATELY this feature is now dead, dolphin-su shows up indistinguishably dressed in user colors :-(

3 9

No network at first startup, but network if rebooted. Tumbleweed.
by Stakanov 21 Dec '21

21 Dec '21

I have following issue but I do not know were I can find useful logs to understand what is going on. My machine is a very standard Gigabyte Mainboard with integrated Ethernet. Only one NIC is present on the system. The issue started about 3 month ago, I always wanted to investigate but I am too annoyed now, so I really want to solve it. Take a typical start up: the machine is on a dlan Ethernet were a Devolo 1200 (with a small OpenWRT like OS running on it) is managing the Ethernet interface. When I start up, the system (with wicked as network setup, there is no WLAN on the machine) boots fine. But when arriving at the Plasma desktop you have no network. If you try to restart networking services (e.g. sudo rcnetwork restart) it does but you do not have network. I also tried to restart every wicked service in yast but no network and no error log. But if you simply reboot the machine all works as expected. Now I tried this also without a graphical user session, it is the same, so the issue is IMO not bound to Plasma. I thought it might be that this is a timeout with the dlan being in energy saving at the first bood and awaken at the second. But wouldn't wicked wait until the interface has an address? Wouldn't it complain logging clearly in journalctl? Anybody else in the past encountered such an issue? Thank you in advance.

7 10

TLP 1.4 defaults changed lead to laptop sound and/or nvidia optimus problems [SOLUTION]
by Mykola Krachkovsky 20 Dec '21

20 Dec '21

Hi, This is not a question or bugreport, just information for some people that might be unaware or wondering. With TLP 1.4 (from snapshot 20211210 or later) there are some new defaults: SOUND_POWER_SAVE_ON_AC=1 (was 0) [1] and RUNTIME_PM_DRIVER_DENYLIST="mei_me nouveau radeon" (was "amdgpu mei_me nouveau nvidia pcieport radeon") [2] for my laptop with nvidia optimus and binary proprietary driver these changes lead to 2 problems: 1. Even though NVidia dGPU runtime_status was suspended and there was a 0% in powertop, in reality it was always powered on — hardware LED, temperature. And I couldn't switch it off (I'm using Linux PM, not bbswitch). Not sure why tlp broke all power management of NVidia GPU, maybe will check it later. 2. Before each audio usage there was cracking sound and snd_hda_intel power_save was 1 even when AC is on. Documentation [3] says "Power saving mode may cause slight clicks" but for me they aren't slight but **very** audible and unpleasant. So restoring those values to 1.3 defaults (/etc/tlp.conf or /etc/tlp.d/) fixed things for me. [1] https://github.com/linrunner/TLP/issues/495 [2] https://github.com/linrunner/TLP/issues/488 [3] https://linrunner.de/tlp/settings/audio.html -- Kind regards, Mykola Krachkovsky -- Найкращі побажання, Микола Крачковський

1 0

Getty randomly disabled?
by Marco Calistri 19 Dec '21

19 Dec '21

Why is this happening? (¹) Is it a sort of new feature? How to correct since it never occurred before? To restart my keyboard I need to input: "pkill agetty" (¹)dic 16 16:40:09 localhost systemd[1]: getty(a)tty1.service: Deactivated successfully. Regards, -- Marco Calistri Build: openSUSE Tumbleweed 20211214 Kernel:5.15.7-1-default Desktop: XFCE (4.16.0)

2 2

New computer challenges
by mark neidorff 19 Dec '21

19 Dec '21

5 9

Which video package do I install?
by mark neidorff 17 Dec '21

17 Dec '21

4 6

can installing Kernel:/stable/standard on 15.2 be done?
by Felix Miata 15 Dec '21

15 Dec '21

Trying to install Kernel:/stable/standard kernel on 15.2 nothing provides kmod-zstd needed by kernel-default-5.15.8. <https://software.opensuse.org/search?utf8=%E2%9C%93&baseproject=openSUSE%3A…> returns nothing. What needs to be enabled to allow a newer kernel than 15.2 provides for support of Intel Rocket Lake UHD 730 graphics? -- Evolution as taught in public schools is, like religion, based on faith, not based on science. Team OS/2 ** Reg. Linux User #211409 ** a11y rocks! Felix Miata

2 2

too many packages!
by Ben T. Fender 15 Dec '21

15 Dec '21

I find that too many packages get installed because they are in a pattern or are 'required' by one or another! Would like to see an installation mode that invites users to select 'user-level' applications and then install ONLY those with all depends. The first such application would needs be install a huge load of chained depends but in the end nothing would get installed that the user didn't ask for or that wasn't a dependency for what s/he asked for. I would start with Firefox Rosegarden Qsynth Qjackctl ZynnAddSubFx Thunderbird Seamonkey Sylpheed gftp Google-Earth-Pro Audacity Sonic-Visualizer kdenlive Simple Screeen Recoder Vlc Gimp Spectacle Nedit and the usual utis like kfind kdf Dolphin Dolphin SU Konsole Kcalc I just drew up this list by looking at the icons on the side-panels of my desktop. There are very few progs that I have any interest in that are not here or that are not 'strict' dependencies. Case in point being LibreOffice, a GREAT package but I just don't do any of that, yet it frequently hogs a lot of update bandwith!

5 8

New TW Snapshot breaks Wireless Mouse
by Marco Calistri 15 Dec '21

15 Dec '21

As per the subject: dic 15 09:45:26 localhost pulseaudio[2467]: GetManagedObjects() failed: org.freedesktop.DBus.Error.TimedOut: Failed to activate service 'org.bluez': timed out (service_start_timeout=25000ms) dic 15 09:45:48 localhost Thunar[2986]: thunar-volman: Tipo di dispositivo USB "usb" non supportato. dic 15 09:45:48 localhost Thunar[3005]: thunar-volman: Tipo di dispositivo di input "/dev/input/event3" non supportato. dic 15 09:45:48 localhost Thunar[3009]: thunar-volman: Tipo di dispositivo USB "usbhid" non supportato. dic 15 09:45:48 localhost Thunar[3013]: thunar-volman: Tipo di dispositivo USB "usbhid" non supportato. Thanks for reading! -- Marco Calistri Build: openSUSE Tumbleweed 20211212 Kernel:5.15.7-1-default Desktop: XFCE (4.16.0)

1 1

Fwd: Weird dns (?) cache behavior
by Cristiano Guadagnino 15 Dec '21

15 Dec '21

Hi Christian Il giorno mar 14 dic 2021 alle ore 21:37 Christian Boltz <opensuse(a)cboltz.de> ha scritto: > Hello, > > In your first mail, you wrote that you get a (cached) HTTP 301 redirect. > > HTTP redirects happen at the HTTP level, so your DNS server is innocent. > Yes, that's what I suspected, too. > I'd guess your firefox has the redirect in its content cache - after > all, a 301 means "Moved Permanently". > Try to delete the website content cache. > Thank you Christian, this finally worked!! I did not think Firefox would cache even redirects! Technically, it is not part of the site content, it is governed by the .htaccess file which is part of the http server configuration. And frankly this type of caching seems quite aggressive to me. It could very well bite casual users, too. BTW, I learned something new today, and finally fixed the behavior of my Firefox (and I'm sure I'll be able to fix Falkon in much the same way). For those following this thread, you may be interested in knowing how I cleared the contents cache in Firefox. Here is the page with instructions <https://support.mozilla.org/en-US/kb/how-clear-firefox-cache>. It also instructs you on how to clear the cache automatically every time Firefox closes. Hope this helps. Bye Cris

1 0

Weird dns (?) cache behavior
by Cristiano Guadagnino 14 Dec '21

14 Dec '21

Hi all, I am facing a weird network behavior on my Tumbleweed box. I noticed it long ago but I just thought I was doing something wrong. Anyway... I'll try to cut it short. Yesterday I was updating some remote virtual server, connecting to a domain and adding Let's Encrypt certificates. The server had been inaccessible from the internet up to that moment, and I was used to connect to it through a vpn connection which made it visible under its LAN IP 192.168.1.43. After doing my thing, I tried to connect to it through the new domain name (the VPN was disconnected). The server hosts a Wordpress installation, which almost always replies with an HTTP 301 to canonicalize the url. Here comes the weird part: Firefox (which I had almost always used before) tried to connect to the old 192.168.1.43 IP as soon as it received the 301. After fighting for half a day with rewrite rules on the server, it occurred to me that *maybe* it was a caching problem on the client side. Actually, wget and curl both do the right thing: they are redirected to the expected canonicalized URL. I tried with Falkon, which I had seldomly used with the old IP to access the server. Falkon also exhibits the caching problem, although less extensively than FIrefox (some URL forms do work, other get redirected to the old IP). Finally, I tried with Chromium, which I never used at all. It worked perfectly. To make sure I was not dreaming, I installed the "HTTP Header Live" addon in Firefox to actually see what was going on. The result left me stunned: after receiving HTTP 301, Firefox shows a redirect to https://192.168.1.43, and the redirect is dated Monday, 06 december 2021 *always*. Needless to say, doing the same thing with curl/wget reports the correct redirect URL and current date/time. I tried innumerable times to flush the DNS cache, I even stopped completely the nscd service. BTW, the fact that each application behaves differently hints at an application-level caching (I even proceeded to flush Firefox internal DNS cache), but why are they behaving this way? I have this same consistent behavior *now*, after closing/reopening the various applications innumerable times, even after several system reboots. How can this be possible. What is going on under the hood? Please help me shed some light on this behavior. Thank you in advance Cris [image: cloudHQ] <https://www.free-email-tracker.com> Powered by cloudHQ <https://www.free-email-tracker.com>

4 5

My issues with installation images
by odyx ravo 13 Dec '21

13 Dec '21

--Hi, I'm relatively new to the linux world, And i like openSUSE, And i really want to use it for my everyday life(Currently i'm using debian testing), But i'm having a hard time trying to understand why would openSUSE chose to put a practically useless live images, Instead of a complete live images like all the major distributions, A live images that you can try the distro from and eventually installing the system from them, Instead of trying with them and knowing -as the download page state- that the live images doesn't reflect the real OS because they are incomplete.. And if i want to install the OS i have to download another image file.. I really hope that the openSUSE team would take this into consideration --AH.. And it would be really useful if the team can add torrent files to download from(Again like the major distributions(and this is not because the other distributions are better, It's just because it's very handy to have torrent files sometimes)), Because after i clicked download, The mirror link that was automatically chosen for me was downloading at 70kbps, andi found out about it after i woke up.. --much respect and love.

1 0

automount executable encrypted disk in Leap 15.3
by Rick Smegal 12 Dec '21

12 Dec '21

Hail, A disk that was encrypted in Leap 15.2 was not automatically available after a new installation of 15.3. I can access the encrypted container dev/sd1 with cryptsetup -v luksOpen /dev/sda1 cr_sda1 (r,w only). I would like to know what the clean and 'proper' way is to have this disk mount at boot (with user r,w,x) within the Leap 15.3 framework. I have the contents backed up. Rick

2 1

Re: New computer challenges
by Patrick Shanahan 12 Dec '21

12 Dec '21

* mark neidorff <mark(a)neidorff.com> [12-11-21 15:58]: > So, you use the onboard graphics rather than the NVIDIA graphics? If that > works, it is fine with me. So, how do I now get the Intel graphics to do the > display work? > > Many thanks, > > Mark > > On 12/11/2021 3:29 PM Patrick Shanahan <paka(a)opensuse.org> wrote: > > > * Patrick Shanahan <paka(a)opensuse.org> [12-11-21 15:22]: > ... > > just returned: > Dell x7-11700 > 32GB > GeForce RTX 3060 8GB > 500G SSD > 1T Spinning Rust > > > no problem getting windoz to run with either graphics, nvidia or intel, > but absolutely no success running any graphical interface using nvidia > card. > > on openSUSE Tumbleweed > intel graphics ran fine on Tumbleweed > > > and really wanted to succeed. price was great > > plug in the video cable to the onboard graphics adapter rather than the nvidia card. ps: list traffic unless specifically requested otherwise *should* be conducted on the list as other may be interested. I responded "on list". -- (paka)Patrick Shanahan Plainfield, Indiana, USA @ptilopteri http://en.opensuse.org openSUSE Community Member facebook/ptilopteri Photos: http://wahoo.no-ip.org/piwigo paka @ IRCnet oftc What sort of day was it? A day like all days, filled with those events that alter and illuminate our times...

1 0

Re: gs unable to open shared library on TW
by Adam Mizerski 11 Dec '21

11 Dec '21

W dniu 10.12.2021 o 13:07, Jogchum Reitsma pisze: > Op 09-12-2021 om 12:31 schreef Adam Mizerski: >> W dniu 09.12.2021 o 12:20, Jogchum Reitsma pisze: >>> Hi, >>> >>> When I try to run gs, it says >>> >>> gs: error while loading shared libraries: libpcre2-8.so.0: failed to >>> map segment from shared object >>> >>> libpcre2-8.so.0 is present on the system, as a link to >>> libpcre2-8.so.0.10.4 >>> in both /usr/lib and /usr/lib64 >>> >>> There is also a variant in /usr/local/lib64, this time linking to >>> libpcre2-8.so.0.8.0 >>> >>> Any idea how I can get gs to life back again? >>> >>> regards, Jogchum >>> >> >> Anything in /usr/local is something you had to install manually. > > If by "install manually" you mean installed outside yast2, that is not > entirely true: cuda, for example, is installed by yast in /usr/local. > But maybe I misunderstand what you mean. Well, you're right, that cuda from official nvidia rpm repository installs files into /usr/local. But it should not. According to "Filesystem Hierarchy Standard" chapter "4.9. /usr/local : Local hierarchy" (https://refspecs.linuxbase.org/FHS_3.0/fhs/ch04s09.html) "The /usr/local hierarchy is for use by the system administrator when installing software locally. It needs to be safe from being overwritten when the system software is updated." So you understood correctly, but cuda breaks the rule. > >> There is a conflict between libpcre in /usr/local/lib64 and >> /usr/lib64. You should: >> 1) investigate how did you get those libraries in /usr/local > It is from a pcre2 installation,NOT installed through yast or zypper. No > idea why, it's from October 2019. >> 2) remove the conflicting libraries from /usr/local > > I'll remove the who pcre2 thing, I suppose. > > Thanks! > I'm glad I could help. Please reply to the mailing list.

1 0

susepaste-screenshot
by Marco Calistri 11 Dec '21

11 Dec '21

Hello, Today I noticed that zypper wish to install susepaste and susepaste-screenshot. The first is working ok but whenever I try to upload a picture by using susepaste-screenshot I get back the error: "Paste failed :-(" Here a syntax example I used: susepaste-screenshot --all -t "Test" Would like to know if are there any particular/additional settings to add in order to be able to use this script. Many Thanks. -- Marco Calistri Build: openSUSE Tumbleweed 20211208 Kernel:5.15.6-1-default Desktop: XFCE (4.16.0)

2 2

AutoMySQLBackup alternatives?
by Vojtěch Zeisek 11 Dec '21

11 Dec '21

Hi, I'm used to use https://sourceforge.net/projects/automysqlbackup/ for rotating MySQL/MariaDB backups. Although it hasn't changes for ages, it's simple, it works perfectly, so seemingly no need to change. It's packaged in two home projects in OBS, so fine. But I just wonder what others use to get rotating MySQL/MariaDB backups? Requirements are just simple thing doing the backups in dedicated directory, so no need for any advanced functions. -- Vojtěch Zeisek https://trapa.cz/ Komunita openSUSE GNU/Linuxu Community of the openSUSE GNU/Linux https://www.opensuse.org/

2 2

unbound and Tumbleweed. Unbound service fails to start, complaining about a permission problem
by Stakanov 11 Dec '21

11 Dec '21

Unbound cannot start because of an apparent permission issue. Output is: × unbound.service - Unbound recursive Domain Name Server Loaded: loaded (/usr/lib/systemd/system/unbound.service; enabled; vendor preset: disabled) Active: failed (Result: exit-code) since Tue 2021-12-07 08:14:54 CET; 1h 25min ago Process: 1937 ExecStartPre=/usr/bin/sudo -u unbound /usr/sbin/unbound- anchor -a /var/lib/unbound/root.key -c /etc/unbound/icannbundle.pem (code=exited, status=0/SUCCESS) Process: 1993 ExecStartPre=/usr/sbin/unbound-checkconf (code=exited, status=0/SUCCESS) Process: 1994 ExecStart=/usr/sbin/unbound -d $UNBOUND_OPTIONS (code=exited, status=1/FAILURE) Main PID: 1994 (code=exited, status=1/FAILURE) CPU: 25ms Dec 07 08:14:54 silversurfer sudo[1937]: pam_kwallet5(sudo:session): pam_kwallet5: pam_sm_close_session Dec 07 08:14:54 silversurfer sudo[1937]: pam_kwallet5(sudo:setcred): pam_kwallet5: pam_sm_setcred Dec 07 08:14:54 silversurfer unbound-checkconf[1993]: [1638861294] unbound- checkconf[1993:0] warning: Explicit port randomisation disabled, ignoring outgoing-port-permit and outgoing-port-avoid configuration options Dec 07 08:14:54 silversurfer unbound-checkconf[1993]: [1638861294] unbound- checkconf[1993:0] warning: Explicit port randomisation disabled, ignoring outgoing-port-permit and outgoing-port-avoid configuration options Dec 07 08:14:54 silversurfer unbound-checkconf[1993]: unbound-checkconf: no errors in /etc/unbound/unbound.conf Dec 07 08:14:54 silversurfer systemd[1]: Started Unbound recursive Domain Name Server. Dec 07 08:14:54 silversurfer unbound[1994]: [1638861294] unbound[1994:0] error: Could not open /etc/unbound/unbound.conf: Permission denied Dec 07 08:14:54 silversurfer unbound[1994]: [1638861294] unbound[1994:0] fatal error: Could not read config file: /etc/unbound/unbound.conf. Maybe try unbound -dd, it stays on the commandline to see more errors, or unbound- checkconf Dec 07 08:14:54 silversurfer systemd[1]: unbound.service: Main process exited, code=exited, status=1/FAILURE Dec 07 08:14:54 silversurfer systemd[1]: unbound.service: Failed with result 'exit-code'. So the event is here: > Process: 1994 ExecStart=/usr/sbin/unbound -d $UNBOUND_OPTIONS (code=exited, > status=1/FAILURE) And it seems to be a permission issue: > Dec 07 08:14:54 silversurfer unbound[1994]: [1638861294] unbound[1994:0] > error: Could not open /etc/unbound/unbound.conf: Permission denied Dec 07 > 08:14:54 silversurfer unbound[1994]: [1638861294] unbound[1994:0] fatal > error: Could not read config file: /etc/unbound/unbound.conf. Maybe try > unbound -dd, it stays on the commandline to see more errors, or > unbound-checkconf running unbound with -dd as sudo on CLI gives no further hints, same output. So, is this a packaging issue / pam issue that should be reported? Do the users have all to be part of the unbound group? (Would make any sense to me). Or do I have to put explicitly root to user of the unbound group? Permission of /etc/unbound/unbound.conf are (default, I erased my own setup and de and then reinstalled the package) as follows: entropy@silversurfer:~> ls -l /etc/unbound/ totale 24 drwxr-xr-x 1 root unbound 32 7 dic 09.53 conf.d drwxr-xr-x 1 root unbound 30 7 dic 09.53 keys.d drwxr-xr-x 1 root unbound 44 7 dic 09.53 local.d -rw-r----- 1 root unbound 21947 22 apr 2018 unbound.conf should unbound.conf be readable to unbound user? What is wrong here. Any help appreciated.

4 15

gs unable to open shared library on TW
by Jogchum Reitsma 09 Dec '21

09 Dec '21

Hi, When I try to run gs, it says gs: error while loading shared libraries: libpcre2-8.so.0: failed to map segment from shared object libpcre2-8.so.0 is present on the system, as a link to libpcre2-8.so.0.10.4 in both /usr/lib and /usr/lib64 There is also a variant in /usr/local/lib64, this time linking to libpcre2-8.so.0.8.0 Any idea how I can get gs to life back again? regards, Jogchum

2 1