May 2020 - openSUSE Support - openSUSE Mailing Lists

[opensuse-support] KOrganizer: Meeting requests off by one hour
by mh＠mike.franken.de 25 Aug '20

25 Aug '20

Hi *, I already filed a bug report, but I wanted to ask, if I am the only one facing this problem: Not exactly sure, when this started, but in the last few days I observed, that meeting requests are off by one day, when sent from KOrganizer/Kontact. This does not happen for example with Evolution. To reproduce: Schedule a meeting for today with some attendees, look at the mail that was sent, you'll find a "corrected" date to yesterday. The meeting request arrives in the attendees' mailboxes with this "corrected" date. I was in serious trouble, because all my vacation requests to my company had the wrong date 8-( Thx andy bye. Michael. -- Michael Hirmke -- To unsubscribe, e-mail: opensuse-support+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-support+owner(a)opensuse.org

1 2

[opensuse-support] Cannot complete registration with openSUSEforums
by JigsTheorem 13 Jun '20

13 Jun '20

Hi all I have a problem with Leap 15.1 and went to sign up with openSUSE forums. I received a validation email, which contained neatly ordered garbage but no validation code. The sender of this email is the webmaster from microfocus, but an email to that address just bounces. I have since discovered that openSUSE and microfocus are no longer associated. So, given that the validation process is broken, how do I get signed up to the forums? Regards JT -- To unsubscribe, e-mail: opensuse-support+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-support+owner(a)opensuse.org

8 14

[opensuse-support] Plasma5/kscreen losing primary resolution under Leap 15.1
by Daniel Morris 11 Jun '20

11 Jun '20

Can anyone suggest how to debug and lock my monitor configuration? I've recently bought a great AOC Q3279VWFD8 monitor to work from home (no prizes for guessing why), which can be driven at 2580x1440 @75Hz via DisplayPort from onboard Intel graphics (Core i5-2500K) with an H67M-GE/HT motherboard. Most time the monitor sleeps it wakes up at a lower resolution (typically 1920x1080, but 1024x768 for extra annoyance). Occasionally I can reconfigure it back up with System Settings -> Display & Monitor. Often I have to repeatedly trick it by powering the monitor off and on, and sometimes it can then be stepped back up to 2580x1440. Often it gets stuck at something like 1920x1080 @ 30Hz. Options are restarting Plasma or letting it go to sleep and reconfigure (not guaranteed). Looking in the journal I can find references to: kdeinit5[6968]: kscreen: Requesting missing EDID for outputs (66, 70) org_kde_powerdevil[7047]: kscreen: Requesting missing EDID for outputs (66, 70) systemsettings5[5381]: kscreen: Requesting missing EDID for outputs (66, 70) As an aside, I have a second monitor 1920x1080 to the right, via HDMI. According to the manual my motherboard will only support two outputs (of the four). The second monitor is only needed a few times a week when puzzling over accounts/spreadsheets. I've read around and the various conflicting advice and trails for multi-monitor & Plasma issues go back years. I'm at a bit of a loss to know which bit of behind the scenes magic is going wrong, as I haven't had to concern myself with this kind of setup since the CRT days! I suspect the monitor isn't replying in time with its capabilities. Here's the xrandr output (listing modes) from it working nicely: $ xrandr Screen 0: minimum 320 x 200, current 4664 x 1588, maximum 8192 x 8192 VGA-1 disconnected (normal left inverted right x axis y axis) HDMI-1 connected 1920x1080+2744+508 (normal left inverted right x axis y axis) 598mm x 336mm 1920x1080 60.00*+ 1680x1050 59.88 1280x1024 75.02 60.02 1440x900 59.90 1280x960 60.00 1280x800 59.91 1152x864 75.00 1280x720 60.00 1024x768 75.03 70.07 60.00 832x624 74.55 800x600 72.19 75.00 60.32 56.25 640x480 75.00 72.81 66.67 59.94 720x400 70.08 DP-1 disconnected (normal left inverted right x axis y axis) HDMI-2 disconnected (normal left inverted right x axis y axis) HDMI-3 disconnected (normal left inverted right x axis y axis) DP-2 connected primary 2560x1440+0+0 (normal left inverted right x axis y axis) 725mm x 428mm 2560x1440 59.95 + 74.97* 1920x1080 60.00 60.00 50.00 59.94 1920x1080i 60.00 50.00 59.94 1280x1440 59.91 1680x1050 59.95 1280x1024 75.02 60.02 1440x900 59.89 1280x960 60.00 1280x720 60.00 60.00 50.00 59.94 1024x768 75.03 70.07 60.00 832x624 74.55 800x600 72.19 75.00 60.32 56.25 720x576 50.00 50.00 50.00 720x480 60.00 60.00 59.94 59.94 59.94 640x480 75.00 72.81 66.67 60.00 59.94 59.94 720x400 70.08 2560x1440_74.97 74.89 DP-3 disconnected (normal left inverted right x axis y axis) And here's xrandr output when not working nicely: $ xrandr Screen 0: minimum 320 x 200, current 4664 x 1588, maximum 8192 x 8192 VGA-1 disconnected (normal left inverted right x axis y axis) HDMI-1 connected 1920x1080+2744+508 (normal left inverted right x axis y axis) 598mm x 336mm 1920x1080 60.00*+ 1680x1050 59.88 1280x1024 75.02 60.02 1440x900 59.90 1280x960 60.00 1280x800 59.91 1152x864 75.00 1280x720 60.00 1024x768 75.03 70.07 60.00 832x624 74.55 800x600 72.19 75.00 60.32 56.25 640x480 75.00 72.81 66.67 59.94 720x400 70.08 DP-1 disconnected (normal left inverted right x axis y axis) HDMI-2 disconnected (normal left inverted right x axis y axis) HDMI-3 disconnected (normal left inverted right x axis y axis) DP-2 connected primary 1920x1080+0+0 (normal left inverted right x axis y axis) 725mm x 428mm 1920x1080 60.00* 60.00 50.00 59.94 1920x1080i 60.00 50.00 59.94 1280x1440 59.91 1680x1050 59.95 1280x1024 75.02 60.02 1440x900 59.89 1280x960 60.00 1280x720 60.00 60.00 50.00 59.94 1024x768 75.03 70.07 60.00 832x624 74.55 800x600 72.19 75.00 60.32 56.25 720x576 50.00 50.00 50.00 720x480 60.00 60.00 59.94 59.94 59.94 640x480 75.00 72.81 66.67 60.00 59.94 59.94 720x400 70.08 DP-3 disconnected (normal left inverted right x axis y axis) Between it being bad I tried the following (having created a modeline from cvt when it was previously good - and modelines seem odd in the days of panels/non-CRT, but I haven't been paying attention): $ xrandr --newmode "2560x1440_74.97" 397.00 2560 2760 3040 3520 1440 1443 1448 1506 -hsync +vsync $ xrandr --addmode DP-2 2560x1440_74.97 $ xrandr --output DP-2 --mode 2560x1440_74.97 xrandr: Configure crtc 0 failed # put up with it to do some critical email # made a coffee & swapped a 3D print # powered monitor up and reset several times # switched on second monitor # mashed the keyboard/wiggled mouse/switched off and on again # jumped to VT1 and got prompt mirrored on both monitors # reconfigured successfully with System Settings -> Display & Monitor I'm expecting at least another 10 weeks of working from home, and this is getting really irritating. Help! Ta. Daniel -- To unsubscribe, e-mail: opensuse-support+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-support+owner(a)opensuse.org

4 9

[opensuse-support] Fonts quality after update to libfreetype6 2.10 in Leap 15.1?
by Andrei Borzenkov 30 May '20

30 May '20

Anyone noticed the difference? There are forum posts and I was hit by this issue as well. To me it looks certainly worse and I was not able to get the same look with libfreetype6 2.10 and I had with 2.9. I attached two screenshots to https://bugzilla.opensuse.org/show_bug.cgi?id=1172148 of the same terminal content using two different library versions. If anyone has suggestion how to get the same result with 2.10 as I had with 2.9 I am grateful. I never configured anythjing explicitly, it is default Xfce installation without any customization. I do not actually know how to customize fonts (or, better said, I cannot predict what effect changing individual parameters would have). For now I locked libfreetype6, but with 15.2 not far away ... Interesting that I do not see the same effect in TW, so it could be something specific to Leap (may be some other libraries that do not work correctly with new libfreetype6). -- To unsubscribe, e-mail: opensuse-support+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-support+owner(a)opensuse.org

7 12

[opensuse-support] LANG=POSIX instead of wanted en_US.UTF-8
by Vojtěch Zeisek 27 May '20

27 May '20

Hello, on relatively simple minimal installation (small web server in VM) on Leap 15.1 I try to install GitLab, but it complains: Environment variable LANG specifies a non-UTF-8 locale. GitLab requires UTF-8 encoding to function properly. Please check your locale settings. So I checked settings: # locale LANG=POSIX LC_CTYPE=en_US.UTF-8 LC_NUMERIC="POSIX" LC_TIME="POSIX" LC_COLLATE="POSIX" LC_MONETARY="POSIX" LC_MESSAGES="POSIX" LC_PAPER="POSIX" LC_NAME="POSIX" LC_ADDRESS="POSIX" LC_TELEPHONE="POSIX" LC_MEASUREMENT="POSIX" LC_IDENTIFICATION="POSIX" LC_ALL= # localectl status System Locale: LANG=en_US.UTF-8 VC Keymap: us X11 Layout: n/a # cat /etc/locale.conf LANG=en_US.UTF-8 # echo $LANG POSIX I changed all LC_* variables to en_US.UTF-8 in YaST /etc/sysconfig Editor, so it seems to be correct in /etc/sysconfig/language but there is no change in the above outputs. Not even after reboot. ;-) It seems it helps if I manually export LANG='en_US.UTF-8', but this seems bit weird to me. I'd have to do such export after every boot. GitLab is the first application to complain, everything else works well, no problems with locales, encodings or so. But still, I wonder how to properly set locales to en_US.UTF-8...? I'd expect YaST to do the job. Yours, -- Vojtěch Zeisek https://trapa.cz/ Komunita openSUSE GNU/Linuxu Community of the openSUSE GNU/Linux https://www.opensuse.org/

2 4

Re: [External] Re: [opensuse-support] HONEYWELL : COTS : [urgent] : Information required on security-related patches under opensuse
by Marcus Meissner 26 May '20

26 May '20

On Tue, May 26, 2020 at 01:05:19PM +0000, Kumar, Dhanalakshmi wrote: > Hi Marcus , > > Could you please let us know the latest version of GNU compiler collection. The upstream GCC Project release is 10.1 On openSUSE Leap 15.1, SUSE Linux Enterprise 12 and 15 the latest is: gcc9 93.1 openSUSE Leap 15.1: https://lists.opensuse.org/opensuse-updates/2020-05/msg00151.html SUSE Linux Enterprise 15: http://lists.suse.com/pipermail/sle-updates/2020-May/014649.html SUSE Linux Enterprise 12: http://lists.suse.com/pipermail/sle-updates/2020-May/014747.html Ciao, Marcus > > > Thanks and Stay Secure, > Dhanalakshmi Kumar > Vulnerability Management > Tata Consultancy Services | Contracted to Honeywell > Desk: +91-6746778032 > Email: Dhanalakshmi.Kumar(a)Honeywell.com Disclaimer Notice Please do not email any confidential or privileged information that may violate export control rules as I'm NOT authorized to view Export Controlled Data. > > > > -----Original Message----- > From: Kumar, Dhanalakshmi > Sent: Tuesday, May 19, 2020 7:15 PM > To: Marcus Meissner <meissner(a)suse.de> > Cc: opensuse-support(a)opensuse.org; DL-INTVULMGMT <DL-INTVULMGMT(a)Honeywell.com>; B&FApps_VulnerabilityManagement <B&FApps_VulnerabilityManagement(a)Honeywell.com> > Subject: RE: [External] Re: [opensuse-support] HONEYWELL : COTS : [urgent] : Information required on security-related patches under opensuse > Importance: High > > Hi Marcus , > > Could you please let us know the latest version of GNU compiler collection. > > > > Thanks and Stay Secure, > Dhanalakshmi Kumar > Vulnerability Management > Tata Consultancy Services | Contracted to Honeywell > Desk: +91-6746778032 > Email: Dhanalakshmi.Kumar(a)Honeywell.com Disclaimer Notice Please do not email any confidential or privileged information that may violate export control rules as I'm NOT authorized to view Export Controlled Data. > > > > -----Original Message----- > From: Marcus Meissner <meissner(a)suse.de> > Sent: Tuesday, May 19, 2020 7:05 PM > To: Kumar, Dhanalakshmi <Dhanalakshmi.Kumar(a)Honeywell.com> > Cc: opensuse-support(a)opensuse.org; DL-INTVULMGMT <DL-INTVULMGMT(a)Honeywell.com>; B&FApps_VulnerabilityManagement <B&FApps_VulnerabilityManagement(a)Honeywell.com> > Subject: [External] Re: [opensuse-support] HONEYWELL : COTS : [urgent] : Information required on security-related patches under opensuse > > Hi, > > Not sure if you were really looking for openSUSE. > > openSUSE security patches are being mailed out via our opensuse-security-announce list: > > https://lists.opensuse.org/opensuse-security-announce/ > > For SUSE Linux Enterprise, our security landing page is at https://www.suse.com/support/security/ > and links to either mailing lists, webui form to see advisories, per-CVE pages, and also OVAL and CVRF datafeeds. > > Ciao, Marcus for SUSE Security > > On Tue, May 19, 2020 at 12:00:30PM +0000, Kumar, Dhanalakshmi wrote: > > Hi Team, > > > > We recognize your time is valuable so tell us the best way to learn about and obtain the latest security patches or software revisions/upgrades of your product : > > > > Option #1: On a monthly basis, Honeywell can send an email inquiring if new security patches are available. > > Option #2: Provide Honeywell with an annual release schedule and we will contact you upon each release date. > > Option #3: Notify Honeywell with the information related to the patch/version when such becomes available. > > Option #4: Suggest alternate methods that your company uses to inform customers about software patches or revisions. > > Option # 5: Provide us the website URL from where we can get the new version release information as well as release notes as a monthly basis. > > > > > > Your action :: > > > > * Please revert us with an option# > > > > * Please fill up the table with the latest information available > > > > > > > > Product Name > > > > Honeywell installed version > > > > Latest Market version in website > > > > Release Date of Latest Market version > > > > Website URL > > > > End Of Support of the Honeywell installed version GNU COMPILER > > COLLECTION > > GCC-9-1.6 > > ? > > > > ? > > > > ? > > > > ? > > > > > > We want to stay in touch to obtain new security patches or software revisions that Honeywell can implement accordingly. Keeping Honeywell systems secure and up to date are a major priority for the Honeywell Information Technology organization. > > > > If there is someone else in your company that we should contact, please inform us. > > > > We look forward to your response to the above options and if you have > > any questions, contact us by replying to this email or > > DL-INTVULMGMT(a)Honeywell.com<mailto:DL-INTVULMGMT@Honeywell.com> > -- Marcus Meissner,SUSE LINUX GmbH; Maxfeldstrasse 5; D-90409 Nuernberg; Zi. 3.1-33,+49-911-740 53-432,,serv=loki,mail=wotan,type=real <meissner(a)suse.de> -- To unsubscribe, e-mail: opensuse-support+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-support+owner(a)opensuse.org

1 0

[opensuse-support] Alcor Cardreader does not work
by Axel Braun 24 May '20

24 May '20

Hi, my laptop (runnung TW) is equipped with an Alcor cardreader: X1E:/home/docb # opensc-tool --list-readers # Detected readers (pcsc) Nr. Card Features Name 0 No Alcor Micro AU9560 00 00 journalctl lists when scanning for the device: systemd[1]: Started PC/SC Smart Card Daemon. pcscd[11070]: 00000000 ccid_usb.c:1264:ControlUSB() control failed (1/4): -7 LIBUSB_ERROR_TIMEOUT When inserting a card, it is not recognized: X1E:/home/docb # pcsc_scan Using reader plug'n play mechanism Scanning present readers... 0: Alcor Micro AU9560 00 00 Thu May 21 14:41:04 2020 Reader 0: Alcor Micro AU9560 00 00 Event number: 0 Card state: Card removed, (not detecting the inserted card) Journalctl: kernel: do_IRQ: 1.34 No irq handler for vector I found in the Arch wiki some hints that this may work: https://wiki.archlinux.org/index.php/Smartcards Is this a kernel configuration issue? Thanks Axel -- To unsubscribe, e-mail: opensuse-support+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-support+owner(a)opensuse.org

2 5

[opensuse-support] Opensuse mirrors in kazakhstan?
by Nikita Stepanov 22 May '20

22 May '20

-- To unsubscribe, e-mail: opensuse-support+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-support+owner(a)opensuse.org

3 2

[opensuse-support] Wrong battery indication after recent TW updates
by Marco Calistri 20 May '20

20 May '20

GM, As for the subject, suddenly after one of latest Tumbleweed updates, battery indicator is wrong it measures 50% charged while it is 100%. ########### [10:37:01.636] device changed: /org/freedesktop/UPower/devices/battery_BAT1 native-path: BAT1 vendor: SANYO model: L08L6Y02 power supply: yes updated: mar 19 mag 2020, 10:37:01 (0 seconds ago) has history: yes has statistics: yes battery present: yes rechargeable: yes state: charging warning-level: none energy: 50,9268 Wh energy-empty: 0 Wh energy-full: 100,899 Wh energy-full-design: 54,2124 Wh energy-rate: 12,0657 W voltage: 12,45 V time to full: 4,1 hours percentage: 50% capacity: 100% technology: lithium-ion icon-name: 'battery-good-charging-symbolic' History (rate): 1589895415 12,066 charging 1589895414 11,633 discharging ########### Of course the issue is not hardware related since battery is 100% healthy. Wonder if others users of TW are facing the same problem. Thanks and regards, -- Marco Calistri Build: openSUSE Tumbleweed 20200516 Kernel: 5.6.12-1-default - Cinnamon 4.2.2 -- To unsubscribe, e-mail: opensuse-support+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-support+owner(a)opensuse.org

2 2

[opensuse-support] Request: Installation Sk1 - package inkscape-extensions-skencil cannot be provided from sources
by michael.kasimir＠gmx.de 20 May '20

20 May '20

Hi all, for editing older Corel files in CDR format (version 11) on openSUSE the importing results with inkscape were not sufficient, so I tried to install Sk1. I tried to install sk1 (Python-Based Vector Drawing Program) provided at: https://software.opensuse.org/download/package?package=sk1&project=openSUSE %3ALeap%3A15.1[1] Unfortunately during the installation of the necessary 10 packages one package cannot not be provided: inkscape-extensions-skencil-0.92.4-lp151.56.3.x86_64.rpm The system messages during installation are: linux-4t6d: # zypper install sk1-2.0~rc2-lp151.3.3.x86_64.rpm Repository-Daten werden geladen... Installierte Pakete werden gelesen... Paketabhängigkeiten werden aufgelöst... Die folgenden 10 NEUEN Pakete werden installiert: inkscape-extensions-skencil libwx_gtk2u_media-suse3 libwx_gtk2u_propgrid-suse3 libwx_gtk2u_richtext-suse3 libwx_gtk2u_stc-suse3 python2-pycups python2-reportlab python-wxWidgets-3_0 python-wxWidgets-3_0-lang sk1 Das folgende empfohlene Paket wurde automatisch gewählt: python-wxWidgets-3_0-lang 10 neue Pakete zu installieren. Gesamtgröße des Downloads: 14,0 MiB. Bereits im Cache gespeichert: 0 B. Nach der Operation werden zusätzlich 69,5 MiB belegt. Fortfahren? [j/n/v/...? zeigt alle Optionen] (j): j Paket libwx_gtk2u_media-suse3-3.0.3-lp151.6.14.x86_64 abrufen (1/10), 47,1 KiB (115,5 KiB entpackt) Abrufen: libwx_gtk2u_media-suse3-3.0.3-lp151.6.14.x86_64.rpm ........................................................................................................................[fertig] Paket libwx_gtk2u_propgrid-suse3-3.0.3-lp151.6.14.x86_64 abrufen (2/10), 255,6 KiB (872,9 KiB entpackt) Abrufen: libwx_gtk2u_propgrid-suse3-3.0.3-lp151.6.14.x86_64.rpm .....................................................................................................................[fertig] Paket libwx_gtk2u_richtext-suse3-3.0.3-lp151.6.14.x86_64 abrufen (3/10), 472,5 KiB ( 1,7 MiB entpackt) Abrufen: libwx_gtk2u_richtext-suse3-3.0.3-lp151.6.14.x86_64.rpm .........................................................................................................[fertig (1,9 MiB/s)] Paket libwx_gtk2u_stc-suse3-3.0.3-lp151.6.14.x86_64 abrufen (4/10), 676,6 KiB ( 2,2 MiB entpackt) Abrufen: libwx_gtk2u_stc-suse3-3.0.3-lp151.6.14.x86_64.rpm ..............................................................................................................[fertig (1,8 MiB/s)] Paket python-wxWidgets-3_0-3.0.2.0-lp151.3.3.x86_64 abrufen (5/10), 8,9 MiB ( 47,1 MiB entpackt) Abrufen: python-wxWidgets-3_0-3.0.2.0-lp151.3.3.x86_64.rpm ..............................................................................................................[fertig (2,0 MiB/s)] Paket python-wxWidgets-3_0-lang-3.0.2.0-lp151.3.3.x86_64 abrufen (6/10), 227,4 KiB ( 1,0 MiB entpackt) Abrufen: python-wxWidgets-3_0-lang-3.0.2.0-lp151.3.3.x86_64.rpm .........................................................................................................[fertig (1,9 MiB/s)] Paket python2-pycups-1.9.74-lp151.3.3.1.x86_64 abrufen (7/10), 73,8 KiB (219,2 KiB entpackt) Abrufen: python2-pycups-1.9.74-lp151.3.3.1.x86_64.rpm ...............................................................................................................................[fertig] Paket python2-reportlab-3.4.0-lp151.3.3.1.x86_64 abrufen (8/10), 1,4 MiB ( 6,9 MiB entpackt) Abrufen: python2-reportlab-3.4.0-lp151.3.3.1.x86_64.rpm .................................................................................................................[fertig (1,9 MiB/s)] Paket sk1-2.0~rc2-lp151.3.3.x86_64 abrufen (9/10), 1,9 MiB ( 9,4 MiB entpackt) Paket inkscape-extensions-skencil-0.92.4-lp151.56.3.x86_64 abrufen (10/10), 20,3 KiB ( 3,4 KiB entpackt) Abrufen: inkscape-extensions-skencil-0.92.4-lp151.56.3.x86_64.rpm ...........................................................................................................[Nicht gefunden] Datei './x86_64/inkscape-extensions-skencil-0.92.4-lp151.56.3.x86_64.rpm' auf Medium 'https://download.opensuse.org/repositories/graphics/openSUSE_Leap_15.1/' nicht gefunden Abbrechen, wiederholen, ignorieren? [a/w/i/...? zeigt alle Optionen] (a): a Während oder nach der Installation/dem Entfernung von Paketen ist ein Problem aufgetreten: Die Installation wurde gemäß Anweisung abgebrochen. In der Fehlermeldung oben finden Sie einen entsprechenden Hinweis. linux-4t6d: # I could not find any source for the above mentioned repo. I would appreciate to get an answer about this question and any possible further assistance. With kind regards M -------- [1] https://software.opensuse.org/download/package?package=sk1&project=openSUSE %3ALeap%3A15.1

4 4

[opensuse-support] Request: compile python3 with bluetooth support
by Guadagnino Cristiano 20 May '20

20 May '20

Hi all, I'd like to request that python3 be compiled with bluetooth support, if possible. That would allow to report battery levels for bluetooth devices by using the script available at https://github.com/TheWeirdDev/Bluetooth_Headset_Battery_Level. Thank you in advance. Cris-- To unsubscribe, e-mail: opensuse-support+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-support+owner(a)opensuse.org

3 2

[opensuse-support] HONEYWELL : COTS : [urgent] : Information required on security-related patches under opensuse
by Kumar, Dhanalakshmi 19 May '20

19 May '20

Hi Team, We recognize your time is valuable so tell us the best way to learn about and obtain the latest security patches or software revisions/upgrades of your product : Option #1: On a monthly basis, Honeywell can send an email inquiring if new security patches are available. Option #2: Provide Honeywell with an annual release schedule and we will contact you upon each release date. Option #3: Notify Honeywell with the information related to the patch/version when such becomes available. Option #4: Suggest alternate methods that your company uses to inform customers about software patches or revisions. Option # 5: Provide us the website URL from where we can get the new version release information as well as release notes as a monthly basis. Your action :: * Please revert us with an option# * Please fill up the table with the latest information available Product Name Honeywell installed version Latest Market version in website Release Date of Latest Market version Website URL End Of Support of the Honeywell installed version GNU COMPILER COLLECTION GCC-9-1.6 ? ? ? ? We want to stay in touch to obtain new security patches or software revisions that Honeywell can implement accordingly. Keeping Honeywell systems secure and up to date are a major priority for the Honeywell Information Technology organization. If there is someone else in your company that we should contact, please inform us. We look forward to your response to the above options and if you have any questions, contact us by replying to this email or DL-INTVULMGMT(a)Honeywell.com<mailto:DL-INTVULMGMT@Honeywell.com> Thanks and Stay Secure, Dhanalakshmi Kumar Vulnerability Management Tata Consultancy Services | Contracted to Honeywell Desk: +91-6746778032 Email: Dhanalakshmi.Kumar(a)Honeywell.com<mailto:Dhanalakshmi.Kumar@Honeywell.com> Disclaimer Notice Please do not email any confidential or privileged information that may violate export control rules as I'm NOT authorized to view Export Controlled Data.

3 2

[opensuse-support] Problem with .desktop file after zypper dup
by Freek de Kruijf 18 May '20

18 May '20

Since yesterday after a zypper dup om my Tumbleweed system, I can't use/start a .desktop file which contains Terminal=true. The error message is: Cannot find application 'konsole' "whereis konsole" gives: konsole: /usr/bin/konsole /usr/share/konsole PATH contains ...:/usr/bin:... Should I report a bug? -- fr.gr. member openSUSE Freek de Kruijf -- To unsubscribe, e-mail: opensuse-support+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-support+owner(a)opensuse.org

1 1

[opensuse-support] authentication via fingerprint-reader
by Axel Braun 15 May '20

15 May '20

Hi, I'm playing with the fingerprint-reader for login authentication (Tumbleweed/ KDE). The fingerprint-reader is working properly and I have enrolled and verified some fingerprints. Question now how to incorporate this into the pam properly? As https://en.opensuse.org/SDB:Using_fingerprint_authentication is quite outdated I followed https://wiki.archlinux.org/index.php/SDDM#Using_a_fingerprint_reader and added auth sufficient pam_fprintd.so to /etc/pam.d/sddm, which afterwards looks like: #%PAM-1.0 auth sufficient pam_fprintd.so auth include common-auth account include common-account password include common-password session required pam_loginuid.so session include common-session session optional pam_keyinit.so revoke force Result: At the login-screen I enter the password, and afterwards the login freezes. Putting the finter on the reader does not help. Hitting 'Enter' on an empty password field neither. I have never worked with pam, so thats completely a blackbox for me. Any thint is appreciated! Thanks Axel -- To unsubscribe, e-mail: opensuse-support+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-support+owner(a)opensuse.org

3 2

[opensuse-support] Clang update file "conflict"
by Mykola Krachkovsky 15 May '20

15 May '20

Hi, I'm trying to update openSUSE Tumbleweed from 20200509 to current and got a lot of clang file conflicts like: ``` File /usr/bin/clang from install of clang9-9.0.1-10.3.x86_64 (openSUSE-20170510-0) conflicts with file from package clang10-10.0.0-1.2.x86_64 (@System) File /usr/bin/clang from install of clang9-9.0.1-10.3.x86_64 (openSUSE-20170510-0) conflicts with file from package clang8-8.0.1-8.3.x86_64 (@System) ``` But they are alternatives: ``` $ rpm -qf /usr/bin/clang clang8-8.0.1-8.3.x86_64 clang9-9.0.1-10.1.x86_64 clang10-10.0.0-1.2.x86_64 $ ll /usr/bin/clang lrwxrwxrwx 1 root root 23 кві 10 02:31 /usr/bin/clang -> /etc/alternatives/ clang ``` They shouldn't be in conflict. What is wrong? -- Kind regards, Mykola Krachkovsky -- Найкращі побажання, Микола Крачковський

3 2

[opensuse-support] mariadb not starting in TW
by Jogchum Reitsma 10 May '20

10 May '20

Hi all, Running Tumbleweed, my mariadb database refuses to start. Running journalctl -xe gives mei 07 20:21:03 linux-mkay systemd[1]: Starting MariaDB database server... -- Subject: A start job for unit mariadb.service has begun execution -- Defined-By: systemd -- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- A start job for unit mariadb.service has begun execution. -- -- The job identifier is 2184. mei 07 20:21:04 linux-mkay mysql-systemd-helper[4411]: 2020-05-07 20:21:04 0 [Note] /usr/sbin/mysqld (mysqld 10.4.12-MariaDB) starting as process 4411 ... mei 07 20:21:04 linux-mkay mysql-systemd-helper[4411]: 2020-05-07 20:21:04 0 [Warning] Can't create test file /home/jogchum/mysql/linux-mkay.lower-test mei 07 20:21:04 linux-mkay mysql-systemd-helper[4411]: [95B blob data] mei 07 20:21:04 linux-mkay mysql-systemd-helper[4411]: 2020-05-07 20:21:04 0 [ERROR] Aborting mei 07 20:21:04 linux-mkay systemd[1]: mariadb.service: Main process exited, code=exited, status=1/FAILURE -- Subject: Unit process exited -- Defined-By: systemd -- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- An ExecStart= process belonging to unit mariadb.service has exited. -- -- The process' exit code is 'exited' and its exit status is 1. mei 07 20:21:04 linux-mkay systemd[1]: mariadb.service: Failed with result 'exit-code'. -- Subject: Unit failed -- Defined-By: systemd -- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- The unit mariadb.service has entered the 'failed' state with result 'exit-code'. mei 07 20:21:04 linux-mkay systemd[1]: Failed to start MariaDB database server. -- Subject: A start job for unit mariadb.service has failed -- Defined-By: systemd -- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- A start job for unit mariadb.service has finished with a failure. -- -- The job identifier is 2184 and the job result is failed. The version installed is mariadb --version mariadb Ver 15.1 Distrib 10.4.12-MariaDB, for Linux (x86_64) using EditLine wrapper I don't use the database often, so I don't know when it started failing. But, according to my .mysql_history, it worked on December 27 last year. I've looked at bugs https://bugzilla.opensuse.org/show_bug.cgi?id=1166786 and https://bugzilla.opensuse.org/show_bug.cgi?id=1166781 but it seems to me they are unrelated to this error. Anyone who knows what can be going on here, or what I can do to get things going again, or getting more info? regards, Jogchum

5 6

[opensuse-support] Strongswan error with Networkmanager-L2TP for Client-LAN LT2P/IPSEC VPN connection
by Firas Riyazuddin 05 May '20

05 May '20

Hello, I've configured L2TP/IPSEC on my TP-Link ER6080 router but am having an error when using the Networkmanager-lt2p package. I have confirmed that the router settings are ok since I am able to connect using Mac OS X. My OS is Opensuse Leap 15.1 . uname -a 4.12.14-lp151.28.48-default #1 SMP Fri Apr 17 05:38:36 UTC 2020 (18849d1) x86_64 x86_64 x86_64 GNU/Linux Network topology is 192.168.43.xxx (client LAN IP)/107.77.xxx.x (client WAN IP) ----- INTERNET ----- 70.xx.xx.xx (Router WAN IP)/192.168.0.xxx(Router LAN IP/Subnet is 192.168.0.0/24) If successfully connected I've configured the Router so that the client machine gets IP similar to 10.10.xx.xx and on the router end of the tunnel the client machine has an IP that appears on the same subnet as the Router's LAN (192.168.0.xxx). Here's the output of the debug sudo CHARONDEBUG="knl 4, ike 4, esp 4, lib 4, cfg 4" /usr/lib/nm-l2tp-service --debug nm-l2tp[1258] <debug> nm-l2tp-service (version 1.2.8-lp151.3.58) starting... nm-l2tp[1258] <debug> uses default --bus-name "org.freedesktop.NetworkManager.l2tp" nm-l2tp[1258] <info> ipsec enable flag: yes ** Message: Check port 1701 connection id : "XYZ VPN" (s) uuid : "386d037b-e241-4570-a513-b4d6d01ca16b" (s) interface-name : NULL (sd) type : "vpn" (s) permissions : ["user:XYZ:"] (s) autoconnect : TRUE (sd) autoconnect-priority : 0 (sd) autoconnect-retries : -1 (sd) timestamp : 0 (sd) read-only : FALSE (sd) zone : "work" (s) master : NULL (sd) slave-type : NULL (sd) autoconnect-slaves : ((NMSettingConnectionAutoconnectSlaves) NM_SETTING_CONNECTION_AUTOCONNECT_SLAVES_DEFAULT) (sd) secondaries : NULL (sd) gateway-ping-timeout : 0 (sd) metered : ((NMMetered) NM_METERED_UNKNOWN) (sd) lldp : -1 (sd) stable-id : NULL (sd) auth-retries : -1 (sd) ipv6 method : "auto" (s) dns : [] (s) dns-search : [] (s) dns-options : NULL (sd) dns-priority : 0 (sd) addresses : ((GPtrArray*) 0x564bcf6b9ae0) (s) gateway : NULL (sd) routes : ((GPtrArray*) 0x564bcf6b9b00) (s) route-metric : -1 (sd) route-table : 0 (sd) ignore-auto-routes : FALSE (sd) ignore-auto-dns : FALSE (sd) dhcp-hostname : NULL (sd) dhcp-send-hostname : TRUE (sd) never-default : FALSE (sd) may-fail : TRUE (sd) dad-timeout : -1 (sd) dhcp-timeout : 0 (sd) ip6-privacy : ((NMSettingIP6ConfigPrivacy) NM_SETTING_IP6_CONFIG_PRIVACY_UNKNOWN) (sd) addr-gen-mode : 1 (sd) token : NULL (sd) proxy method : 0 (sd) browser-only : FALSE (sd) pac-url : NULL (sd) pac-script : NULL (sd) vpn service-type : "org.freedesktop.NetworkManager.l2tp" (s) user-name : "XYZ" (s) persistent : FALSE (sd) data : ((GHashTable*) 0x7fb7f4006d80) (s) secrets : ((GHashTable*) 0x7fb7f4006d80) (s) timeout : 0 (sd) ipv4 method : "auto" (s) dns : [] (s) dns-search : [] (s) dns-options : NULL (sd) dns-priority : 0 (sd) addresses : ((GPtrArray*) 0x564bcf6b9e00) (s) gateway : NULL (sd) routes : ((GPtrArray*) 0x564bcf6b9e20) (s) route-metric : -1 (sd) route-table : 0 (sd) ignore-auto-routes : FALSE (sd) ignore-auto-dns : FALSE (sd) dhcp-hostname : NULL (sd) dhcp-send-hostname : TRUE (sd) never-default : FALSE (sd) may-fail : TRUE (sd) dad-timeout : -1 (sd) dhcp-timeout : 0 (sd) dhcp-client-id : NULL (sd) dhcp-fqdn : NULL (sd) nm-l2tp[1258] <info> starting ipsec Stopping strongSwan IPsec failed: starter is not running Starting strongSwan 5.8.2 IPsec [starter]... Loading config setup Loading conn '386d037b-e241-4570-a513-b4d6d01ca16b' nm-l2tp[1258] <info> Spawned ipsec up script with PID 1309. initiating Main Mode IKE_SA 386d037b-e241-4570-a513-b4d6d01ca16b[1] to 70.xx.xx.xx generating ID_PROT request 0 [ SA V V V V V ] sending packet: from 192.168.xx.xxx[500] to 70.xx.xx.xx[500] (236 bytes) received packet: from 70.xx.xx.xx[500] to 192.168.xx.xxx[500] (132 bytes) parsed ID_PROT response 0 [ SA V V V ] received XAuth vendor ID received DPD vendor ID received NAT-T (RFC 3947) vendor ID selected proposal: IKE:3DES_CBC/HMAC_SHA1_96/PRF_HMAC_SHA1/MODP_1024 generating ID_PROT request 0 [ KE No NAT-D NAT-D ] sending packet: from 192.168.xx.xxx[500] to 70.xx.xx.xx[500] (244 bytes) received packet: from 70.xx.xx.xx[500] to 192.168.xx.xxx[500] (244 bytes) parsed ID_PROT response 0 [ KE No NAT-D NAT-D ] local host is behind NAT, sending keep alives generating ID_PROT request 0 [ ID HASH ] sending packet: from 192.168.xx.xxx[4500] to 70.xx.xx.xx[4500] (68 bytes) received packet: from 70.xx.xx.xx[500] to 192.168.xx.xxx[500] (68 bytes) invalid HASH_V1 payload length, decryption failed? could not decrypt payloads message parsing failed ignore malformed INFORMATIONAL request INFORMATIONAL_V1 request with message ID 661973262 processing failed sending retransmit 1 of request message ID 0, seq 3 sending packet: from 192.168.xx.xxx[4500] to 70.xx.xx.xx[4500] (68 bytes) received packet: from 70.xx.xx.xx[500] to 192.168.xx.xxx[500] (68 bytes) invalid HASH_V1 payload length, decryption failed? could not decrypt payloads message parsing failed ignore malformed INFORMATIONAL request INFORMATIONAL_V1 request with message ID 688629832 processing failed nm-l2tp[1258] <warn> Timeout trying to establish IPsec connection nm-l2tp[1258] <info> Terminating ipsec script with PID 1309. Stopping strongSwan IPsec... destroying IKE_SA in state CONNECTING without notification establishing connection '386d037b-e241-4570-a513-b4d6d01ca16b' failed nm-l2tp[1258] <warn> Could not establish IPsec tunnel. (nm-l2tp-service:1258): GLib-GIO-CRITICAL **: g_dbus_method_invocation_take_error: assertion 'error != NULL' failed I know it is not an incorrect PSK since the connection works fine with the Mac ( https://wiki.strongswan.org/projects/strongswan/wiki/FAQ#invalid-HASH_V1-pa… ) I tried checking if the encryption/hash algorithms settings were faulty but I don't think this is the cause. When probed ( per https://github.com/nm-l2tp/NetworkManager-l2tp/wiki/Known-Issues#querying-v… ), the router lists the following allowed algorithms: SA=(Enc=3DES Hash=MD5 Group=2:modp1024 Auth=PSK LifeType=Seconds LifeDuration=28800) SA=(Enc=3DES Hash=MD5 Group=2:modp1024 Auth=RSA_Sig LifeType=Seconds LifeDuration=28800) SA=(Enc=3DES Hash=SHA1 Group=2:modp1024 Auth=PSK LifeType=Seconds LifeDuration=28800) SA=(Enc=3DES Hash=SHA1 Group=2:modp1024 Auth=RSA_Sig LifeType=Seconds LifeDuration=28800) The IPSEC Phase 1 and Phase 2 settings I've tried are 3des-sha1-modp1024 or 3des-md5-modp1024 and 3des-sha1 and 3des-md5 . It doesn't make a difference. I get the same output on the error log. I have tried checking and unchecking the "Force UDP Encapsulation" box on the IPSEC settings and it's the same error. Any idea how to resolve this issue? I've tried changing the usernames, passwords and PSKs to simpler ones and it's the same error. Much appreciated. Thanks.

2 2

[opensuse-support] [Leap 15] Launcher stopped working
by Bob Williams 04 May '20

04 May '20

For the past week, after my machine has been running for a few hours, the launcher stops appearing. I mean the icon at the left hand end of the panel which pops a menu of programs to launch, when left clicked. The right click menu (Edit Applications, Configure Application Menu, Unlock Widgets) still works. I have tried reverting to opensuse themes and desktops (from Breeze) but it made no difference, apart from changing the appearance of the icon. I'm using Leap 15.1 and KDE5/Frameworks. -- Bob Williams System: Linux 4.12.14-lp151.28.48-default Desktop: KDE Frameworks: 5.55.0, Qt: 5.9.7 and Plasma: 5.12.8 -- To unsubscribe, e-mail: opensuse-support+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-support+owner(a)opensuse.org

2 2