July 2004 - openSUSE Mobile (Deutsch) - openSUSE Mailing Lists

Irda funktioniert nicht
by Dennis Campbell 02 Jul '04

02 Jul '04

Hi, Ich versuche immer noch alle Funktionen von meinem Rechner auf linux zum funktionieren bringen. Mein Problem momentan ist IR zum laufen zu bringen. Ich kann irda mit: rcirda start zum laufen bringen (keine Fehlermeldungen). Nun stelle ich mein Handy (mit eingeschaltenen IR, S45i) in Reichweite Wenn ich jetzt irdadump eingebe kommt: 11:17:28.535829 xid:cmd 0e04cae5 > ffffffff S=6 s=0 (14) 11:17:28.625743 xid:cmd 0e04cae5 > ffffffff S=6 s=1 (14) 11:17:28.715729 xid:cmd 0e04cae5 > ffffffff S=6 s=2 (14) 11:17:28.805717 xid:cmd 0e04cae5 > ffffffff S=6 s=3 (14) 11:17:28.895702 xid:cmd 0e04cae5 > ffffffff S=6 s=4 (14) 11:17:28.985690 xid:cmd 0e04cae5 > ffffffff S=6 s=5 (14) 11:17:29.075680 xid:cmd 0e04cae5 > ffffffff S=6 s=* dennis hint=8404 [ Computer IrCOMM ] (23) Offensichtlich wird nur mein Computer erkannt mein Handy nicht. Habe ich etwas vergessen? Rechner: Asus M6700N Suse 9.1 P.S. Unter Sch... Windows funktioniert IR-Verbindung mit handy. Danke für alle tips. Ciao ________________________________________________________________ Verschicken Sie romantische, coole und witzige Bilder per SMS! Jetzt neu bei WEB.DE FreeMail: http://freemail.web.de/?mc=021193

2 1

Vmware 4.5.2 mit 9.1 und neuestem Kernel
by W.Helmert 02 Jul '04

02 Jul '04

Hallo, ich kämpfe immer noch mit vmware und bekome es nicht in den Griff. Also: Die Installation von vmware 5.4.2 (build 8848) läuft zunächst einmal glatt durch - bis zu dem Augenblick wo es um die Bildung der vmmon module geht. Die Installation bricht mit der unten stehenden Fehlermeldung ab. Das ist besonders blöd, weil vmware mit dem Kernel 2.6.4-54.5 schon mal lief, mit dem folgenden 2.6.-7.75 nicht mehr (gleicher Abbruch bei der Bildung von vmmon module) und mit dem von heute 2.6.5-7.95 auch nicht. Fehlt irgendwo nur ein Hinweis in den Dateien oder liegt hier immer noch ein grundsätzliches Problem vor? Was kann ich mit der Meldung unten (WARNING .....) anfangen? Hat jemand einen Hinweis? Wolfram Helmert > What is the location of the directory of C header files that match > your running > kernel? [/usr/src/linux/include] > > Extracting the sources of the vmmon module. > > Building the vmmon module. > > Using 2.6.x kernel build system. > make: Entering directory `/tmp/vmware-config0/vmmon-only' > make -C /usr/src/linux/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. modules > make[1]: Entering directory `/usr/src/linux-2.6.5-7.95' > Makefile:438: .config: Datei oder Verzeichnis nicht gefunden > > WARNING: Symbol version dump /usr/src/linux-2.6.5-7.95/Module.symvers > is missing, modules will have CONFIG_MODVERSIONS disabled. > > CC [M] /tmp/vmware-config0/vmmon-only/linux/driver.o > /bin/sh: line 1: scripts/basic/fixdep: Datei oder Verzeichnis nicht > gefunden > make[2]: *** [/tmp/vmware-config0/vmmon-only/linux/driver.o] Fehler 1 > make[1]: *** [_module_/tmp/vmware-config0/vmmon-only] Fehler 2 > make[1]: Leaving directory `/usr/src/linux-2.6.5-7.95' > make: *** [vmmon.ko] Fehler 2 > make: Leaving directory `/tmp/vmware-config0/vmmon-only' > Unable to build the vmmon module. > > For more information on how to troubleshoot module-related problems, > please > visit our Web site at > "http://www.vmware.com/download/modules/modules.html" and > "http://www.vmware.com/support/reference/linux/prebuilt_modules_linux.html". > > Execution aborted.

2 1

sound ruckelt massiv unter suse 9.1
by Christoph Lehmann 02 Jul '04

02 Jul '04

Hi Habe suse 9.1 auf einem a31p thinkpad. sei es beim abspielen von xmms ogg files oder auch der systemklang beim runterfahren: der sound ruckelt massiv. Nicht aber wenn ich webradio mittels realplayer höre wie kann man das beheben gruss christoph

3 2

Re: [suse-laptop] Re: Lüfter läuft ständig
by Kevin Lauer 02 Jul '04

02 Jul '04

Am Freitag, 2. Juli 2004 10:35 schrieben Sie: > Hi, > > > In der > > Systemüberwachung von KDE gibt es auch einen Anzeiger: cpu0/clock. Den > > kann man sich sogar schön in die Leiste unten legen. > > Wie geht denn das? Meinst Du KsysGuard? Da kann ich im Applet aber die > Anzeige der Wert irgendwie nicht ändern ... > > Danke und Grüße > > Stefan Hi Stefan, genau den meine ich. Man muss in die Kontrollleiste das Miniprogramm Systemueberwachung einfuegen. Dann entfernt man per rechten Mausklick eine Anzeige im Applet und startet ksysguard. Jetzt zieht man mit der Maus den gewuenschten Anzeiger einfach auf das eben geleerte Feld in der Kontrollleiste. Gruss Kevin

2 1

Immer noch Probleme mit powersave und standby
by Dennis Campbell 02 Jul '04

02 Jul '04

Hallo alle, Ich habe immer noch Probleme mit Standby. Mein System: Suse 9.1 kernel 2.6.5-7.75 neuste powersave from ftp://ftp.suse.com/pub/people/seife/powersave/ Nach dem Einschalten und Hochfahren funktioniert alles einwandfrei. Nach Standby und Resume scheint alles wieder zu funktionieren. Dann bricht nach einiger Zeit das Netzwerk zusammen. Dann funktioniert die Tastatur nicht mehr richtig (liegt am ipw2100 Modul: nach rmmod ipw2100 geht Tastatur wieder). rcnetwork restart bringt genausowenig wie rmmod bcm5700, modprobe bcm5700. Komischerweise funktioniert das Netzwerk nach erneutem Standby und Resume wieder bricht allerdings nach einiger Zeit wieder zusammen (kann Minuten bis Stunden dauern). Woran kann das nur liegen? Hier noch Auszug aus /var/log/messages: Jul 1 18:30:45 dennis [powersaved][4311]: DIAG in Function executeEvent, line 1497: Executed event: button.sleep Jul 1 18:30:45 dennis [powersaved][4311]: DIAG in Function executeEvent, line 1497: Executed event: global.standby Jul 1 18:30:46 dennis kernel: ehci_hcd 0000:00:1d.7: remove, state 1 Jul 1 18:30:46 dennis kernel: usb usb1: USB disconnect, address 1 Jul 1 18:30:46 dennis kernel: ehci_hcd 0000:00:1d.7: USB bus 1 deregistered Jul 1 18:30:46 dennis dhcpcd[2235]: recvfrom: Network is down Jul 1 18:30:46 dennis /sbin/hotplug-stopped[0]: hotplugging not enabled. Run rchotplug start Jul 1 18:30:46 dennis last message repeated 2 times Jul 1 18:30:46 dennis dhcpcd[2235]: dhcpStop: ioctl SIOCSIFADDR: No such device Jul 1 18:30:46 dennis [powersave_proxy][5724]: WARNING: Modules unloaded Jul 1 18:30:46 dennis [powersaved][4311]: DIAG in Function updateCPUState, line 1592: CPU state changed to high! CPU load: 98 Jul 1 18:30:46 dennis [powersave_proxy][5793]: DIAG: dethrottle cpu Jul 1 18:30:46 dennis [powersaved][4311]: DIAG in Function executeEvent, line 1497: Executed event: processor.dynamic.high Jul 1 18:30:46 dennis dhcpcd[2235]: dhcpStop: ioctl SIOCSIFFLAGS: No such device Jul 1 18:30:46 dennis /sbin/hotplug-stopped[0]: hotplugging not enabled. Run rchotplug start Jul 1 18:30:46 dennis /sbin/hotplug-stopped[0]: hotplugging not enabled. Run rchotplug start Jul 1 18:30:46 dennis [powersaved][4311]: DIAG in Function updateCPUState, line 1588: CPU state changed to low! CPU load: 30 Jul 1 18:30:47 dennis modify_resolvconf: no matching backup found, left everything alone Jul 1 18:30:47 dennis dhcpcd-hook: Skipping 'ifdown $INTERFACE -o dhcp' call Jul 1 18:30:47 dennis [powersaved][5723]: DIAG in Function executeEvent, line 1470: SET do standby to 1 Jul 1 18:30:47 dennis kernel: PM: Preparing system for suspend Jul 1 18:31:02 dennis kernel: Stopping tasks: ==============================================================================================| Jul 1 18:31:02 dennis kernel: PM: Entering state. Jul 1 18:31:02 dennis kernel: Back to C! Jul 1 18:31:02 dennis kernel: PM: Finishing up. Jul 1 18:31:02 dennis kernel: PCI: Setting latency timer of device 0000:00:1d.0 to 64 Jul 1 18:31:02 dennis kernel: PCI: Setting latency timer of device 0000:00:1d.1 to 64 Jul 1 18:31:02 dennis kernel: PCI: Setting latency timer of device 0000:00:1d.2 to 64 Jul 1 18:31:02 dennis kernel: PCI: Setting latency timer of device 0000:00:1d.7 to 64 Jul 1 18:31:02 dennis kernel: PCI: Setting latency timer of device 0000:00:1f.5 to 64 Jul 1 18:31:02 dennis kernel: PCI: Setting latency timer of device 0000:00:1f.6 to 64 Jul 1 18:31:02 dennis kernel: PCI: Enabling device 0000:02:01.2 (0000 -> 0002) Jul 1 18:31:02 dennis /sbin/hotplug-stopped[0]: hotplugging not enabled. Run rchotplug start Jul 1 18:31:02 dennis kernel: blk: queue dfc32200, I/O limit 4095Mb (mask 0xffffffff) Jul 1 18:31:02 dennis kernel: Restarting tasks... done Jul 1 18:31:02 dennis [powersaved][4311]: DIAG in Function executeEvent, line 1497: Executed event: global.resume.standby Jul 1 18:31:02 dennis /sbin/hotplug-stopped[0]: hotplugging not enabled. Run rchotplug start Jul 1 18:31:02 dennis kernel: Synaptics Touchpad, model: 1 Jul 1 18:31:02 dennis kernel: Firmware: 4.6 Jul 1 18:31:02 dennis kernel: 180 degree mounted touchpad Jul 1 18:31:02 dennis kernel: Sensor: 18 Jul 1 18:31:02 dennis kernel: new absolute packet format Jul 1 18:31:02 dennis kernel: Touchpad has extended capability bits Jul 1 18:31:02 dennis kernel: -> four buttons Jul 1 18:31:02 dennis kernel: -> multifinger detection Jul 1 18:31:02 dennis kernel: -> palm detection Jul 1 18:31:02 dennis kernel: input: SynPS/2 Synaptics TouchPad on isa0060/serio4 Jul 1 18:31:02 dennis [powersave_proxy][5859]: DIAG: Service hotplug started again Jul 1 18:31:03 dennis /sbin/hotplug-stopped[0]: hotplugging not enabled. Run rchotplug start Jul 1 18:31:03 dennis last message repeated 2 times Jul 1 18:31:03 dennis kernel: bcm5700: unsupported module, tainting kernel. Jul 1 18:31:03 dennis kernel: Broadcom Gigabit Ethernet Driver bcm5700 with Broadcom NIC Extension (NICE) ver. 7.1.22 (01/07/04) Jul 1 18:31:03 dennis kernel: bcm5700-0: TSO not available on this NIC Jul 1 18:31:03 dennis kernel: eth0: Broadcom BCM5788 1000Base-T found at mem ff9f0000, IRQ 4, node addr 000ea6c48ac0 Jul 1 18:31:03 dennis kernel: eth0: Broadcom BCM5705 Integrated Copper transceiver found Jul 1 18:31:03 dennis kernel: eth0: Scatter-gather ON, 64-bit DMA OFF, Tx Checksum ON, Rx Checksum ON, 802.1Q VLAN ON, NAPI ON Jul 1 18:31:03 dennis kernel: ipw2100: unsupported module, tainting kernel. Jul 1 18:31:03 dennis kernel: ipw2100: Intel(R) PRO/Wireless 2100 Network Driver, 0.46_3 Jul 1 18:31:03 dennis kernel: ipw2100: Copyright(c) 2003-2004 Intel Corporation Jul 1 18:31:03 dennis kernel: Detected ipw2100 PCI device at 0000:02:02.0, mem: 0xFF9EE000-0xFF9EEFFF -> e2851000, irq: 4 Jul 1 18:31:03 dennis kernel: eth1: Using hotplug firmware load. Jul 1 18:31:03 dennis /sbin/hotplug-stopped[0]: hotplugging not enabled. Run rchotplug start Jul 1 18:31:03 dennis [powersaved][4311]: DIAG in Function getBatteriesInfo, line 31: remaining: 97 percent, -1 minutes Jul 1 18:31:03 dennis [powersaved][4311]: WARNING in Function start; line 388: Select returned an Error, but not interrupted through a signal: Success! This is not nice, but normal after a suspend! Jul 1 18:31:03 dennis kernel: Registered as eth1 Jul 1 18:31:03 dennis kernel: ehci_hcd 0000:00:1d.7: EHCI Host Controller Jul 1 18:31:03 dennis kernel: PCI: Setting latency timer of device 0000:00:1d.7 to 64 Jul 1 18:31:03 dennis kernel: ehci_hcd 0000:00:1d.7: irq 10, pci mem e293cc00 Jul 1 18:31:03 dennis kernel: ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 Jul 1 18:31:03 dennis kernel: PCI: cache line size of 32 is not supported by device 0000:00:1d.7 Jul 1 18:31:03 dennis kernel: ehci_hcd 0000:00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29 Jul 1 18:31:03 dennis kernel: usb usb1: Product: EHCI Host Controller Jul 1 18:31:03 dennis kernel: usb usb1: Manufacturer: Linux 2.6.5-7.75-default ehci_hcd Jul 1 18:31:03 dennis kernel: usb usb1: SerialNumber: 0000:00:1d.7 Jul 1 18:31:03 dennis kernel: hub 1-0:1.0: USB hub found Jul 1 18:31:03 dennis kernel: hub 1-0:1.0: 6 ports detected Jul 1 18:31:03 dennis [powersaved][4311]: DIAG in Function updateCPUState, line 1592: CPU state changed to high! CPU load: 82 Jul 1 18:31:03 dennis [powersave_proxy][5859]: DIAG: Modules loaded Jul 1 18:31:04 dennis /etc/hotplug/usb.agent[5997]: need a device for this command Jul 1 18:31:04 dennis kernel: ipw2100: eth1: Restarting adapter. Jul 1 18:31:04 dennis kernel: eth1: Using hotplug firmware load. Jul 1 18:31:04 dennis kernel: usb 3-1: USB disconnect, address 2 Jul 1 18:31:04 dennis /etc/hotplug/usb.agent[6175]: need a device for this command Jul 1 18:31:04 dennis kernel: usb 3-1: new low speed USB device using address 3 Jul 1 18:31:05 dennis kernel: usb 3-1: Product: Optical USB Mouse Jul 1 18:31:05 dennis kernel: usb 3-1: Manufacturer: Logitech Jul 1 18:31:05 dennis [powersaved][4311]: DIAG in Function updateCPUState, line 1588: CPU state changed to low! CPU load: 34 Jul 1 18:31:05 dennis /etc/hotplug/usb.agent[6264]: need a device for this command Jul 1 18:31:05 dennis kernel: input: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1d.1-1 Jul 1 18:31:05 dennis kernel: usb 2-2: USB disconnect, address 2 Jul 1 18:31:05 dennis [powersaved][4311]: DIAG in Function updateCPUState, line 1592: CPU state changed to high! CPU load: 94 Jul 1 18:31:05 dennis /etc/hotplug/usb.agent[6335]: need a device for this command Jul 1 18:31:05 dennis kernel: bcm5700: eth0 NIC Link is UP, 100 Mbps full duplex, receive & transmit flow control ON Jul 1 18:31:05 dennis kernel: usb 2-2: new full speed USB device using address 3 Jul 1 18:31:05 dennis kernel: usb 2-2: Product: Camera Jul 1 18:31:05 dennis kernel: quickcam: QuickCam USB camera found (driver version QuickCam USB $Date: 2003/12/31 16:15:06 $) Jul 1 18:31:05 dennis kernel: quickcam: Kernel:2.6.5-7.75-default bus:2 class:FF subclass:FF vendor:046D product:0870 Jul 1 18:31:05 dennis kernel: quickcam: Sensor HDCS-1020 detected Jul 1 18:31:05 dennis /etc/hotplug/usb.agent[6396]: need a device for this command Jul 1 18:31:05 dennis kernel: quickcam: Registered device: /dev/video0 Jul 1 18:31:05 dennis [powersaved][4311]: DIAG in Function updateCPUState, line 1588: CPU state changed to low! CPU load: 57 Jul 1 18:31:09 dennis [powersaved][4311]: DIAG in Function updateCPUState, line 1592: CPU state changed to high! CPU load: 81 Jul 1 18:31:12 dennis [powersaved][4311]: DIAG in Function updateCPUState, line 1588: CPU state changed to low! CPU load: 9 Jul 1 18:31:14 dennis kernel: eth0: no IPv6 routers present Jul 1 18:31:14 dennis kernel: eth1: no IPv6 routers present Jul 1 18:31:19 dennis [powersaved][4311]: DIAG in Function executeEvent, line 1497: Executed event: processor.dynamic.low Jul 1 18:31:54 dennis [powersaved][4311]: DIAG in Function getBatteriesInfo, line 31: remaining: 97 percent, -1 minutes Jul 1 18:32:08 dennis [powersaved][4311]: DIAG in Function updateCPUState, line 1592: CPU state changed to high! CPU load: 100 Jul 1 18:32:08 dennis [powersave_proxy][6659]: DIAG: dethrottle cpu Jul 1 18:32:08 dennis [powersaved][4311]: DIAG in Function executeEvent, line 1497: Executed event: processor.dynamic.high Jul 1 18:32:10 dennis acpi_hotkeys: non-hotkey-event: other thermal_zone THRM 00000081 00000000 Jul 1 18:32:10 dennis [powersaved][4311]: DIAG in Function executeEvent, line 1497: Executed event: other Jul 1 18:32:11 dennis [powersaved][4311]: DIAG in Function updateCPUState, line 1588: CPU state changed to low! CPU load: 30 Jul 1 18:32:12 dennis [powersaved][4311]: DIAG in Function updateCPUState, line 1592: CPU state changed to high! CPU load: 100 Jul 1 18:32:13 dennis [powersaved][4311]: DIAG in Function updateCPUState, line 1588: CPU state changed to low! CPU load: 0 Jul 1 18:32:23 dennis [powersaved][4311]: DIAG in Function executeEvent, line 1497: Executed event: processor.dynamic.low Jul 1 18:32:41 dennis [powersaved][4311]: DIAG in Function updateCPUState, line 1592: CPU state changed to high! CPU load: 100 Jul 1 18:32:41 dennis [powersave_proxy][6688]: DIAG: dethrottle cpu Jul 1 18:32:41 dennis [powersaved][4311]: DIAG in Function executeEvent, line 1497: Executed event: processor.dynamic.high Jul 1 18:32:42 dennis [powersaved][4311]: DIAG in Function updateCPUState, line 1588: CPU state changed to low! CPU load: 0 Jul 1 18:32:52 dennis [powersaved][4311]: DIAG in Function executeEvent, line 1497: Executed event: processor.dynamic.low Jul 1 18:32:55 dennis [powersaved][4311]: DIAG in Function getBatteriesInfo, line 31: remaining: 97 percent, -1 minutes Jul 1 18:33:01 dennis kernel: eth1: Firmware RTC stalled. Jul 1 18:33:01 dennis kernel: eth1: Scheduling firmware restart. Jul 1 18:33:01 dennis kernel: ipw2100: eth1: Restarting adapter. Jul 1 18:33:01 dennis kernel: eth1: Using hotplug firmware load. Jul 1 18:33:04 dennis kernel: eth1: ipw2100_hw_send_command timed out. Jul 1 18:33:04 dennis kernel: eth1: Failed to start the card. Jul 1 18:33:05 dennis kernel: eth1: Hardware fatal error detected. Jul 1 18:33:05 dennis kernel: eth1: Scheduling firmware restart. Jul 1 18:33:05 dennis kernel: ipw2100: eth1: Restarting adapter. Jul 1 18:33:05 dennis kernel: eth1: Using hotplug firmware load. Jul 1 18:33:08 dennis kernel: eth1: ipw2100_hw_send_command timed out. Jul 1 18:33:08 dennis kernel: eth1: Failed to start the card. Jul 1 18:33:09 dennis kernel: eth1: Hardware fatal error detected. ________________________________________________________________ Verschicken Sie romantische, coole und witzige Bilder per SMS! Jetzt neu bei WEB.DE FreeMail: http://freemail.web.de/?mc=021193

3 3

Re: Immer noch Probleme mit powersave und standby
by Dennis Campbell 02 Jul '04

02 Jul '04

Zur vervollständigung meine hardware: Asus M6700N Intel(R) Pentium(R) M processor 1500MHz Auszug aus lspci: 0000:00:00.0 Host bridge: Intel Corp. 82855PM Processor to I/O Controller (rev 21) 0000:00:01.0 PCI bridge: Intel Corp. 82855PM Processor to AGP Controller (rev 21) 0000:00:1d.0 USB Controller: Intel Corp. 82801DB USB (Hub #1) (rev 03) 0000:00:1d.1 USB Controller: Intel Corp. 82801DB USB (Hub #2) (rev 03) 0000:00:1d.2 USB Controller: Intel Corp. 82801DB USB (Hub #3) (rev 03) 0000:00:1d.7 USB Controller: Intel Corp. 82801DB USB2 (rev 03) 0000:00:1e.0 PCI bridge: Intel Corp. 82801BAM/CAM PCI Bridge (rev 83) 0000:00:1f.0 ISA bridge: Intel Corp. 82801DBM LPC Interface Controller (rev 03) 0000:00:1f.1 IDE interface: Intel Corp. 82801DBM Ultra ATA Storage Controller (rev 03) 0000:00:1f.3 SMBus: Intel Corp. 82801DB/DBM SMBus Controller (rev 03) 0000:00:1f.5 Multimedia audio controller: Intel Corp. 82801DB AC'97 Audio Controller (rev 03) 0000:00:1f.6 Modem: Intel Corp. 82801DB AC'97 Modem Controller (rev 03) 0000:01:00.0 VGA compatible controller: ATI Technologies Inc RV350 [Mobility Radeon 9600 M10] 0000:02:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5788 Gigabit Ethernet (rev 03) 0000:02:01.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev ac) 0000:02:01.1 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev ac) 0000:02:01.2 FireWire (IEEE 1394): Ricoh Co Ltd R5C552 IEEE 1394 Controller (rev 04) 0000:02:02.0 Network controller: Intel Corp. PRO/Wireless LAN 2100 3B Mini PCI Adapter (rev 04) _______________________________________________________ WEB.DE Video-Mail - Sagen Sie mehr mit bewegten Bildern Informationen unter: http://freemail.web.de/?mc=021199

1 0

TuxMobil News 06/2004
by Werner Heuser 01 Jul '04

01 Jul '04

Hello, the TuxMobil News digest for April 2004[1] has good news for Linux PDA, mobile phone and laptop users. Here is an extract of the most important or most interesting messages. Werner Heuser |=| Jean Tourrilhes "of the Linux Wireless LAN Howto project took some time to answer a few questions from members at LinuxQuestions.org[2]. Among some of the more interesting commments was his pick of best and worst Open Source friendly vendors ..." [SlashDot][3]. TuxMobil.org has a new page about Mobile Adhoc Networks - MANETs with Linux[4]. |=| O2PosTrack[6] is a console-based C++ application for retrieving position information from a mobile phone as provided by the (German) O2 mobile phone company. It runs on Linux and Mac OS X, has configurable output streams (CSV file, GNU-Plot data files, etc.) and should work with all GSM-compatible mobile phones connected via serial link (e.g. IR or USB-to-serial converter). More GPS software for Linux is listed at TuxMobil.org[6]. [1] http://tuxmobil.org/mobile_news_2004_06.html [2] http://www.linuxquestions.org/questions/showthread.php?threadid=194667 [3] http://slashdot.org/article.pl?sid=04/06/21/1652245 [4] http://tuxmobil.org/manet_linux.html [5] http://www.jdev.de/html/en/projects/o2pt/index.html [6] http://tuxmobil.org/navigation_gps.html You may find the _daily_ TuxMobil News RSS/XML channel, the archiv and a news submission form at http://tuxmobil.org/newsfeed.html BTW: You may subscribe to the complete _monthly_ digest there, too. -- |=| Werner Heuser = Berliner Str. 122 = D-13187 Berlin = Germany |=| <wehe at tuxmobil.org> T. 0049 - (0)30 - 349 53 86 |=| http://TuxMobil.org UniX on Mobile Systems: HOWTOs,Software |*| This is no time for phony rhetoric -- Lou Reed

1 0