August 2018 - openSUSE Build Service - openSUSE Mailing Lists

[opensuse-buildservice] Public Key not available SLE_12_SP3 s390x
by Usman Haider 27 Nov '19

27 Nov '19

Hi, I am new and trying local build on s390x with SLE_12_SP3 using the following command sudo osc build but I get the public key not available for many packages. You can see the output by clicking the following link https://pastebin.com/YBQk3vGe I know that I can use --noverify option to bypass this and builds complete successfully when I use --noverify option but how can I fix this? What will happen if I don't fix it? -- Usman -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

4 9

[opensuse-buildservice] OBS Appliance - Unable to Update
by Khalil Graves 15 Apr '19

15 Apr '19

I am running OBS Appliance 2.8.2 on VMware ESX. When the appliance boots I get an error "Failed to start LSB: Finds the storage device to be used for OBS server and/or worker." I have included a dump of systemctl status obsstoagesetup.service below. I Just want to confirm if this is normal or should be addressed. I also attempted and update of a clone of my appliance via zypper but 2 GB root drive is not sufficient for upgrades. Update begins but end with "Error Code: Write Error". I checked root drive and it was up to 100% utilization from 93% prior to update. I decided to install latest version of OBS appliance over existing install. New appliance adopts my old setting but now I am getting and error on boot "Failed to start LSB: open build service source service server." In addition I am unable to build rpms in this current state. Not sure what to do next to get the cloned appliance to build a package. SYSTEMCTL status obsstoragesetup.service obsstoragesetup.service - LSB: Finds the storage device to be used for OBS server and/or worker Loaded: loaded (/etc/init.d/obsstoragesetup; bad; vendor preset: disabled) Active: failed (Result: exit-code) since Tue 2018-03-06 18:44:59 UTC; 16min ago Docs: man:systemd-sysv-generator(8) Process: 1365 ExecStart=/etc/init.d/obsstoragesetup start (code=exited, status=1/FAILURE) Mar 06 18:44:59 linux obsstoragesetup[1365]: OBS_SERVER_SIZE=38912 Mar 06 18:44:59 linux obsstoragesetup[1365]: TOTAL_SWAP_SIZE=1024 Mar 06 18:44:59 linux obsstoragesetup[1365]: FINAL_VG_SIZE = 12284 - 38912 - 25600 - 1024 Mar 06 18:44:59 linux obsstoragesetup[1365]: FINAL_VG_SIZE=-53252 Mar 06 18:44:59 linux obsstoragesetup[1365]: OBS_WORKER_ROOT_SIZE=-26626 Mar 06 18:44:59 linux obsstoragesetup[1365]: MIN_WORKER_ROOT_SIZE=4096 Mar 06 18:44:59 linux systemd[1]: obsstoragesetup.service: Control process exited, code=exited status=1 Mar 06 18:44:59 linux systemd[1]: Failed to start LSB: Finds the storage device to be used for OBS server and/or worker. Mar 06 18:44:59 linux systemd[1]: obsstoragesetup.service: Unit entered failed state. Mar 06 18:44:59 linux systemd[1]: obsstoragesetup.service: Failed with result 'exit-code'. SYSTEMCTL status obsservice.service obsservice.service - LSB: open build service source service server Loaded: loaded (/etc/init.d/obsservice; bad; vendor preset: disabled) Active: failed (Result: exit-code) since Fri 2018-03-09 11:59:39 UTC; 3min 34s ago Docs: man:systemd-sysv-generator(8) Process: 1761 ExecStart=/etc/init.d/obsservice start (code=exited, status=7) Mar 09 11:59:38 linux systemd[1]: Starting LSB: open build service source service server... Mar 09 11:59:39 linux startproc[1788]: startproc: exit status of parent of /usr/lib/obs/server/bs_service: 13 Mar 09 11:59:39 linux obsservice[1761]: Initializing obsservice..failed Mar 09 11:59:39 linux systemd[1]: obsservice.service: Control process exited, code=exited status=7 Mar 09 11:59:39 linux systemd[1]: Failed to start LSB: open build service source service server. Mar 09 11:59:39 linux systemd[1]: obsservice.service: Unit entered failed state. Mar 09 11:59:39 linux systemd[1]: obsservice.service: Failed with result 'exit-code'. '. -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

2 4

[opensuse-buildservice] OBS + GitHub - deprecation of GitHub Services
by Linux Kamarada 19 Mar '19

19 Mar '19

Hello, guys! I searched how to integrate OBS with GitHub so that a git push would cause OBS to fetch the source code and build. I followed directions on these pages: https://openbuildservice.org/2013/11/22/source-update-via_token/ https://github.com/seccubus/obs_autobuild_test (CC their authors, thank you for the great material!) But when I opened GitHub's Integration & services to add the Obs service, I read this: "Note: [GitHub Services are being deprecated][1]. Please contact your integrator for more information on how to migrate or replace a service with [webhooks][2] or [GitHub Apps][3]." [1]: https://developer.github.com/changes/2018-04-25-github-services-deprecation/ [2]: https://developer.github.com/webhooks/ [3]: https://developer.github.com/apps/differences-between-apps/#about-github-ap… The news is from April 25, 2018. The first paragraph summarizes it: "GitHub plans on shutting down GitHub Services so we can shift focus to other areas of the API, such as strengthening GitHub Apps and GraphQL, and improving webhooks. The intention of GitHub Services was to allow third-party developers to submit code for integrating with their services, but this functionality has been superseded by GitHub Apps and webhooks. GitHub Services has not supported new features since April 25, 2016, and we plan to officially deprecate it on October 1st, 2018." Although I successfully integrated OBS with GitHub using a GitHub Service, is it already possible to do that same integration using GitHub Apps or webhooks? Thank you! Antonio The Linux Kamarada Project http://kamarada.github.io/ -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

7 12

[opensuse-buildservice] Container rebuild trigger on included packages and registry multiple tags
by Jimmy Berry 14 Sep '18

14 Sep '18

Two questions: - Is it possible to have a container rebuild whenever the underlying packages are updated (ie. any package included in the container) even if the packages are in underlying repo path elements and not the project with the container? - Is it possible to publish multiple tags to the opensues registry? Using additionaltags on containerconfig element in kiwi file they are supposedly set, but only tag ends up in the registry. - Related is it possible to keep older revisions (a couple) or "pin" certain tags and keep those until unpinned? Having only a single version of a container is not ideal as it makes it impossible to roll-back to previous version. Project in question: home:jberry:container/osrt-worker-obs. As a note the prjconf necessary to build containers is not terribly visible, intuitive, or documented. -- Jimmy -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

2 2

[opensuse-buildservice] Ubuntu 18.04 packages under OBS 2.8.2 fail
by Ralf Becker 31 Aug '18

31 Aug '18

I try building packages for Ubuntu 18.04 on our (private) OBS 2.8.2 instance: [ 0s] Using BUILD_ROOT=/var/cache/obs/worker/root_4/.mount [ 0s] Using BUILD_ARCH=x86_64:i686:i586:i486:i386 [ 0s] Doing kvm build in /var/cache/obs/worker/root_4/root [ 0s] [ 0s] [ 0s] linux started "build egroupware-epl-archive.dsc" at Fri Aug 31 08:04:54 UTC 2018. [ 0s] [ 0s] Building egroupware-epl-archive-17.1 for project 'stylite-epl' repository 'xUbuntu_18.04' arch 'x86_64' srcmd5 'a2b3574b64329975a304462648e95eb5' [ 0s] [ 0s] processing recipe /var/cache/obs/worker/root_4/.build-srcdir/egroupware-epl-archive.dsc ... [ 0s] running changelog2spec --target debian --file /var/cache/obs/worker/root_4/.build-srcdir/egroupware-epl-archive.dsc [ 0s] init_buildsystem --configdir /var/run/obs/worker/4/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /var/cache/obs/worker/root_4/.build.rpmlist /var/cache/obs/worker/root_4/.build-srcdir/egroupware-epl-archive.dsc build rpmlint-Factory ... [ 1s] /var/cache/obs/worker/root_4/.mount/.init_b_cache/rpms/bash.deb: control.tar.gz is not second ar entry [ 1s] bad binary: bash.deb [ 1s] [ 1s] /var/cache/obs/worker/root_4/.mount/.init_b_cache/rpms/binutils.deb: control.tar.gz is not second ar entry [ 1s] bad binary: binutils.deb [ 1s] exit ... [ 1s] [ 1s] linux failed "build egroupware-epl-archive.dsc" at Fri Aug 31 08:04:55 UTC 2018. [ 1s] Other targets like Ubuntu 16.04 work as expected and have identical configuration: <repository name="xUbuntu_18.04"> <path project="openSUSE.org:Ubuntu:18.04" repository="standard"/> <path project="openSUSE.org:Ubuntu:18.04" repository="universe"/> <arch>i586</arch> <arch>x86_64</arch> </repository> <repository name="xUbuntu_16.04"> <path project="openSUSE.org:Ubuntu:16.04" repository="standard"/> <path project="openSUSE.org:Ubuntu:16.04" repository="universe"/> <arch>i586</arch> <arch>x86_64</arch> </repository> Any ideas? Do I need to update OBS 2.8.2 to build Ubuntu 18.04 packages? Ralf -- Ralf Becker EGroupware GmbH [www.egroupware.org] Handelsregister HRB Kaiserslautern 3587 Geschäftsführer Birgit und Ralf Becker Leibnizstr. 17, 67663 Kaiserslautern, Germany Telefon +49 631 31657-0

2 2

[opensuse-buildservice] Is it possible to build from src.rpm instead of tar-ball?
by Andreas Vetter 27 Aug '18

27 Aug '18

Hi, is there a way to use a src.rpm instead of a tar-ball for building a package? If yes: Is there a way to use the spec-file from within the src.rpm? TIA, Andreas -- Mit freundlichen Gruessen, Andreas Vetter Stellv. IT-Bereichsmanager Fakultaet fuer Physik und Astronomie Tel.: +49 (0)931 31-82264 Informations- und Kommunikationstechnik Tel: +49 (0)931 31-85890 iuk(a)physik.uni-wuerzburg.de -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

5 5

[opensuse-buildservice] Mageia Cauldron (i586): libicu59 not found
by BJH2017 27 Aug '18

27 Aug '18

Hi, My Mageia Cauldron i586 builds are in the 'unresolvable' status due to: nothing provides libicu59 Is this an upstream issue, or something the maintainers of the OBS can do something about? Thanks for your time, Brenton -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

3 2

[opensuse-buildservice] Unable to BR gcc7 from SLE_12_SP3?
by Neal Gompa 22 Aug '18

22 Aug '18

Hey, I'm trying to build a package in my private OBS instance using gcc7 on SLE 12 SP3 and openSUSE Leap 42.3. It is able to resolve the dependency for openSUSE Leap 42.3, but fails with SLE 12 SP3. I get the following error from OBS: nothing provides gcc7 nothing provides gcc7-c++ However, I see it listed in SLE 12 SP3: https://build.opensuse.org/package/show/SUSE:SLE-12-SP3:GA/gcc7 My meta snippet is set to the following: <repository name="SLE_12_SP3"> <path project="openSUSE.org:SUSE:SLE-12-SP3:GA" repository="standard"/> <arch>x86_64</arch> </repository> What am I doing wrong? -- 真実はいつも一つ！/ Always, there's only one truth! -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

2 4

[opensuse-buildservice] Search settings GUI issue
by Jeroen Ooms 22 Aug '18

22 Aug '18

The "Download package" link on my project OBS project page links to: https://software.opensuse.org//download.html?project=home%3Ajeroenooms%3Aop… This is the link that I share with users on my website. However when a user visits this page for the first time, they get presented an broken empty dialog box with no options named "search settings": https://i.imgur.com/nNZcekr.png This is pretty confusing because there is nothing to select and some users think that it is not working and leave the page instead of clicking "OK". -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

2 1

[opensuse-buildservice] yum update before building?
by Jeroen Ooms 22 Aug '18

22 Aug '18

My OBS is repo contains broken Fedora 27/28 builds because OBS Fedora repo seems to contain older versions of some critical dependencies. In particular, OBS seems to have R-core-3.4.4 whereas Fedora currently ships R-core-3.5.0. Because these versions are binary incompatible, the OBS build of my application does not work on the user machine. Log file: https://build.opensuse.org/build/home:jeroenooms:opencpu-2.0/Fedora_28/x86_… Is there some way to "yum update" before starting the build? -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

3 4

[opensuse-buildservice] nodejs10 build failures
by Hans-Peter Jansen 22 Aug '18

22 Aug '18

Hi, today, I stumbled across strange build failures of nodejs10: https://build.opensuse.org/package/show/devel:languages:nodejs/nodejs10 Most failed builds stopped at some point during install without further indication why exactly. It looks like some watchdog is chiming in and stopping the builder. Are there some _constraints missing? 40G disk seems more than enough to me, even if additional intree packages are being built. Any idea, what's going on here? Cheers, Pete -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

2 4

[opensuse-buildservice] openSUSE Factory ARM: Wayland woes
by BJH2017 21 Aug '18

21 Aug '18

Hi, Unfortunately, my openSUSE Factory ARM Vim build target (https://build.opensuse.org/package/show/home:fusion809/vim-suse#) has an 'Unresolvable' status due to: nothing provides libwayland-egl1 = 1.15.0 needed by wayland-devel . This issue occurs for both armv7l and aarch64 architectures. So a fix for this issue would be much appreciated. Thanks for your time, Brenton -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

1 0

[opensuse-buildservice] Doxygen badness error
by Usman Haider 19 Aug '18

19 Aug '18

Hi, I am building doxygen for opensuse 12 backports (s390x) and I am getting this error E: SUSE-Backports-policy-SLE-conflict (Badness: 10000) Package with name doxygen already in SLE I cannot find doxygen at package hub and openSUSE:Backports:SLE-12. Is it really available or it is some kind of bug? Regards, Usman -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

2 2

[opensuse-buildservice] openSUSE Factory ARM builds of Vim are unresolvable due to two separate issues
by BJH2017 19 Aug '18

19 Aug '18

Hi, My openSUSE Factory ARM builds of Vim (https://build.opensuse.org/package/show/home:fusion809/vim-suse) are "unresolvable", for armv7l it is due to: missing pre/vminstalls: kernel-obs-build . My project config (https://build.opensuse.org/project/prjconf/home:fusion809) does not mention kernel-obs-build, so it's not an error due to my settings. While for aarch64 it is due to: nothing provides rpm-config-SUSE needed by rpm This seems like an issue with the snapshot of the ARM factory repos being used. Thanks for your time, Brenton -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

1 1

[opensuse-buildservice] Trying to build OpenRA for Mageia 6: failed to dlopen /usr/lib64/rpm-plugins/systemd_inhibit.so libdbus-1.so.3: cannot open shared object file
by BJH2017 18 Aug '18

18 Aug '18

Hi, I've been trying to build a bleeding-edge OpenRA package for Mageia 6, but unfortunately I'm getting the build error: [ 8s] cycle: perl-libintl-perl -> texinfo [ 8s] breaking dependency texinfo -> perl-libintl-perl [ 8s] done [ 8s] querying package ids... [ 9s] [1/341] installing augeas-lenses-1.8.0-1.mga6 [ 9s] error: Failed to dlopen /usr/lib64/rpm-plugins/systemd_inhibit.so libdbus-1.so.3: cannot open shared object file: No such file or directory [ 9s] error: error reading from file .init_b_cache/augeas-lenses.rpm [ 9s] exit ... [ 9s] [ 9s] fusion809-ot-pc failed "build openra-bleed.spec" at Sat Aug 18 17:16:09 UTC 2018. [ 9s] full log, if needed is here: https://gist.github.com/7e2c94da7df2924b160400d77f012b5c. augeas-lenses isn't a package I build so I think the issue is with the snapshot of the Mageia 6 repos used by the OBS, but you's know more about this than me so I'll let you reach your own conclusions, all I care about is fixing this. Thanks for your time, Brenton -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

1 0

[opensuse-buildservice] conflict for providers of system-release(30) needed by fedora-repos, (provider fedora-release is in conflict with generic-release)
by BJH2017 18 Aug '18

18 Aug '18

Hi, All three of my Rawhide builds are now unresolvable, with the message (https://build.opensuse.org/project/monitor/home:fusion809?arch_x86_64=1&def…): conflict for providers of system-release(30) needed by fedora-repos, (provider fedora-release is in conflict with generic-release) . So the python3-rpm-generators conflicts with python-rpm-macros unresolvable message is gone, at least. Thanks for your time, Brenton -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

1 1

[opensuse-buildservice] Fedora Rawhide build of Vim unresolvable: python3-rpm-generators conflicts with python-rpm-macros
by BJH2017 17 Aug '18

17 Aug '18

Hi, My Fedora Rawhide build of Vim (I think URLs are forbidden so go to home:fusion809/vim-redhat package on the openSUSE Build Service public instance) has the status "Unresolvable" due to a conflict between python3-rpm-generators and python-rpm-macros. I recall asking about this in the IRC channel but I was focused on fixing a Cauldron issue at the time so I forget what I was told about Rawhide and I think email is the way to go as it's better documented. My package doesn't depend on python3-rpm-generators or python-rpm-macros, at least not explicitly. Thanks for your time, Brenton -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

1 0

[opensuse-buildservice] splitdebug configuration
by Morschhäuser, Mark 17 Aug '18

17 Aug '18

Hello, I don't understand how to configure the splitdebug feature. It says " Repotype: TYPE[:OPTIONS] Defines the repository format for published repositories. Valid values are: none, rpm-md, suse, debian, hdlist2, arch, staticlinks. The OPTIONS parameter depends on the repository type, for rpm-md the known options are 'legacy' to create the old rpm-md format, 'deltainfo' or 'prestodelta' to create delta rpm packages, 'rsyncable' to use rsyncable gzip compression. To split the debug packages in an own published repository the option splitdebug:REPOSITORY_SUFFIX can be used." I want OBS to store all debuginfo packages in a separate directory and used ---- Repotype: rpm-md:splitdebug:debug ---- in my project config but all debuginfo packages are stored in the x86_64 directory where the other packages are and the debug directory is not created. How can I do this? Best regards, Mark -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

2 1

[opensuse-buildservice] nice: permission Denied
by Mathias Radtke 16 Aug '18

16 Aug '18

Hi, currently I am setting up another ARM worker on our local instance. RPi3 and BananaPi M2 Ultra are working fine on Debian9. Right now I am trying to run an obsworker on an odroid-xu4 running with debian9. Obsworker starts but when open the screen session I see. nice: './bs_worker': Permission denied What needs to be done to make it run or where to look at? Cheers Mathias -- Mathias Radtke --- http://uib.de/de/support-schulung/schulung/ uib gmbh Bonifaziusplatz 1B 55118 Mainz Tel. 06131 / 27561-16 <phone:+49 61312756116> Fax 06131 / 27561-22 <phone:+49 61312756122> E-Mail: m.radtke(a)uib.de Internet: www.uib.de Geschäftsführer: dr. detlef oertel & erol ueluekmen Handelsregister: Amtsgericht Mainz HRB 6942 -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

2 3

[opensuse-buildservice] OBS sprint report 44
by Christian Bruckmayer 15 Aug '18

15 Aug '18

Hello everyone, we just released the latest sprint report of the OBS team. Some highlights include: * Releasing of MS Azure Cloud uploads from OBS * Automated package builds for pull requests to the OBS project on GitHub * Continuing of the frontend migration to bootstrap Read on here if you want to know more: https://openbuildservice.org/2018/08/15/sprint-report-44/ Christian -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

1 0

[opensuse-buildservice] obs_scm and signature verification
by Matwey V. Kornilov 14 Aug '18

14 Aug '18

Hello, When using tar_scm or obs_scm to create tar.gz from the remote GIT, is it possible to verify signature for specified commit (param name="revision")? -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

1 0

[opensuse-buildservice] getsources: connect to localhost:5352: Connection refused
by Mathias Radtke 13 Aug '18

13 Aug '18

Hi, since Friday we have a problem with our local instance. every build fails with the message in the topic. The obs server is reachable via obs.uib.local. It has two IPs, one for the frontend net (192.168....) and one for the test environment (10.100...). We have 3 workers, which are accessible via the frontend network and did work properly until friday. There are no logs on any worker in /srv/obs/log/ Any logs where I can check whats wrong or suggestion of a solution? Cheers -- Mathias Radtke --- http://uib.de/de/support-schulung/schulung/ uib gmbh Bonifaziusplatz 1B 55118 Mainz Tel. 06131 / 27561-16 <phone:+49 61312756116> Fax 06131 / 27561-22 <phone:+49 61312756122> E-Mail: m.radtke(a)uib.de Internet: www.uib.de Geschäftsführer: dr. detlef oertel & erol ueluekmen Handelsregister: Amtsgericht Mainz HRB 6942 -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

2 2

[opensuse-buildservice] No metadata when using obs_scm service
by Giovanni Santini 13 Aug '18

13 Aug '18

Good afternoon, I am having a quite singular problem; as of now, I am using the `tar_scm` service for my package and I would like to switch to `obs_scm` as requested upstream. The problem is that, as of now, when using the latter one, the Git metadata (AKA the .git folder) is not repacked inside the CPIO archive. Why is it so? I need the Git metadata in order to properly build the package. The service is as it follows:  <service name="tar_scm"> <param name="scm">git</param> <param name="url">https://github.com/telegramdesktop/tdesktop.git</param> <param name="revision">v1.3.7</param> <param name="version">obs</param> <param name="package-meta">yes</param> </service> Thanks in advance. -- Giovanni Santini My blog: http://giovannisantini.tk My code: https://git{hub,lab}.com/ItachiSan My GPG: 2FADEBF5 -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

2 2

[opensuse-buildservice] tumbleweed refreshes since [18-Aug-2017] and [hosts unreachable ] on [ http://ftp5.gwdg.de and http://download.opensuse.org ]
by doiggl＠velocitynet.com.au 09 Aug '18

09 Aug '18

Hello, Hosts http://ftp5.gwdg.de and http://download.opensuse.org unreachable tumbleweed refreshes since [18-Aug-2017] and cannot get to [ http://ftp5.gwdg.de or http://download.opensuse.org] I tried following: [no response from] # ping http://download.opensuse.org ping: unknown host http://download.opensuse.org # ping http://ftp5.gwdg.de ping: unknown host http://ftp5.gwdg.de http://ftp.gwdg.de/pub/opensuse/tumbleweed/repo/oss/suse/repodata ping http://download.opensuse.org ping: unknown host http://download.opensuse.org -I tried to ping google.com -seems ok # ping google.com PING google.com (172.217.25.142) 56(84) bytes of data. 64 bytes from syd15s03-in-f14.1e100.net (172.217.25.142): icmp_seq=1 ttl=52 time=19.4 ms 64 bytes from syd15s03-in-f14.1e100.net (172.217.25.142): icmp_seq=2 ttl=52 time=19.8 ms 64 bytes from syd15s03-in-f14.1e100.net (172.217.25.142): icmp_seq=3 ttl=52 time=19.9 ms 64 bytes from syd15s03-in-f14.1e100.net (172.217.25.142): icmp_seq=4 ttl=52 time=20.1 ms 64 bytes from syd15s03-in-f14.1e100.net (172.217.25.142): icmp_seq=5 ttl=52 time=19.5 ms ^C --- google.com ping statistics --- 5 packets transmitted, 5 received, 0% packet loss, time 4005ms rtt min/avg/max/mdev = 19.480/19.790/20.153/0.287 ms Also: Are there any updates to tumbleweed since 18-Aug-2017 I do not see any updates on mirrors since then. Tried mirrors on: [has date details on] http://sfo-korg-mirror.kernel.org/opensuse/tumbleweed/repo/oss/suse/repodat… [local time is] # date Mon Aug 21 15:00:25 EST 2017 Cheers --Glenn -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

3 4

[opensuse-buildservice] KIWI package expansion problems with SUSE:SLE-15:GA/standard
by Stefan Seyfried 09 Aug '18

09 Aug '18

Good morning, Executive summary: using <source path='obs:/SUSE:SLE-15:GA/standard'/> does not work. Expicitly listing all sub-paths/projects of SUSE:SLE-15:GA/standard does work. Is this a bug or is there a reason for this behaviour? See https://build.opensuse.org/package/show/home:seife:kiwitest/SLES_15SP0_triv… and https://build.opensuse.org/package/show/home:seife:kiwitest/SLES_15SP0_triv… (the "working" one still fails building, but it this is another issue, the question here is about SLES_15SP0_trivial_borken being unresolvable) -- Stefan Seyfried "For a successful technology, reality must take precedence over public relations, for nature cannot be fooled." -- Richard Feynman -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

3 8

[opensuse-buildservice] RPM Boolean Dependencies
by Sean Marlow 06 Aug '18

06 Aug '18

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 Hi all, Sorry in advance for crossposting (opensuse-packaging) as I'm not sure the best list to query. Is there support for Boolean Dependencies [1] in the pipeline for openSUSE build service (osc)? It would be nice for example with packages that depend on Django which has two possible packages python-Django and python-Django1. E.g. Requires: (python-Django1 >= 1.11.0 or python-Django >= 2.0.0) A quick test results in failure. It seems the format_spec_file script [2] chokes on boolean dependencies and splits them all up. Requires: (python-Django1 >= 1.11.0 Requires: python-Django >= 2.0.0) Requires: or [1] http://rpm.org/user_doc/boolean_dependencies.html [2] https://github.com/openSUSE/obs-service-format_spec_file/blob/master/prepar… Thanks, - -- Sean Marlow Public Cloud Developer sean.marlow(a)suse.com -----BEGIN PGP SIGNATURE----- iQIzBAEBCgAdFiEEqA16xWoe2L38VgYCJ30GzZDdUEsFAltoyJYACgkQJ30GzZDd UEuskBAAxvmjkdUTpE/8hT2qN6aVqheRruK+rwYi25XoGuWpIBGLZwaau+yzJrBZ nT33SFPSPeXvMR5cPYHdWN/1hoEEKz3Ouy/wee72IS6pMuhs0F2G8npclyo3oQiW zZNzTTQkN2SVk24L1So3Q9HUTBhqHxsNidaqZbaqtiJVpOiJJ/BbZ/40QFCfp8qJ f5WnozWT+OjzLHEo+HXB5LkbkNrsj8cXhpbe/D9lBnF7EiAHvTs5T/bZMMSOMLfZ 9CJB/L/tZFYxA3Dg8SfsdH52bNBHPCdzmo+hQxr7PNTK9No0+dFDPIfCxTykBqVy V0enR20qEiO8m2b8cu7Ag/Z5phigWhXbFTFtKLQk3eIFdLY7Dm4YO3gTxrnkzILc B00SbhwnMD/JgR1HCKpVswwI9N1GdJNfuCrUXOAJnHUWPssKVVJ1aBHZTaz4OPRf LqbaFLu7IQ03kkMMTtUi+CRdhRa4ifyOeyPQopWTXs/C49tNqwYctw6TKB8aoF2E T7ustnaHwYJ5DENTIgrz7iLgLurNvJIcWRdeaiz2fFH3suztHcypXPD/O28/vfSq KjxVKTdfb104+ABfziVZu8C7SmiMYfwVOnkQ16UHmQ1GwYT30VKfv2B40uMI3rHV QKf/q28d4ZbogMh+KQzNjvI3f7AE/2E3XHfeCQYRFgOV+/c/bYQ= =EIX3 -----END PGP SIGNATURE----- N��r��y隊Z)z{.��Wlz��qﮞ˛��m�)z{.��+�:�{Zr�az�'z��j)h��Ǜ�)]��Ǿ� ޮ�^�ˬz��

1 0

[opensuse-buildservice] WTF is SLE-Module-Development-Tools-OBS? (SLES15)
by Stefan Seyfried 03 Aug '18

03 Aug '18

Hi, I'm trying to set up my internal OBS instance for SLES15. In order to avoid problems, I'm trying to copy the setup of build.opensuse.org. My setup chokes on SUSE:SLE-15:GA/SLE-Module-Development-Tools-OBS, I cannot find it on our SMT as a mirrorable repository. https://build.opensuse.org/project/repository_state/SUSE:SLE-15:GA/SLE-Modu… I'm pretty sure we have bought every available SLES subscription ever sold, and even if not, it should at least show up in "smt-mirror" as "not mirrorable". What special magic is hidden in build.opensuse.org? ;-) Have fun, -- Stefan Seyfried "For a successful technology, reality must take precedence over public relations, for nature cannot be fooled." -- Richard Feynman -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

3 6

[opensuse-buildservice] mismatch between meta prj and webui
by Olaf Hering 03 Aug '18

03 Aug '18

I was adding a description to a prj via the webui. The data showup in Firefox as expected. With 'osc meta prj -e' however I still get the data without <description>. Does either side do any caching? I would expect that 'osc meta' grabs the data straight from the server. Olaf

2 1

[opensuse-buildservice] Reset Scheduled state
by Mathias Radtke 02 Aug '18

02 Aug '18

Hi in our private instance we currently have a problem that one package is in scheduled state. Some builds are schedules without any information, another ones have an entry in the dispatcher log dispatcher.log:262:setting dispatch details to: waiting for 24 compliant workers (15 of them down) The package has been build for SLES12_SP2 so I don't understand why now there should be 24 compliant workers. Currently we have 9 x86_64 worker and some ARMv7 workers. Any suggestion on what to do or where to look to resolve this issue? Cheers -- Mathias Radtke --- http://uib.de/de/support-schulung/schulung/ uib gmbh Bonifaziusplatz 1B 55118 Mainz Tel. 06131 / 27561-16 <phone:+49 61312756116> Fax 06131 / 27561-22 <phone:+49 61312756122> E-Mail: m.radtke(a)uib.de Internet: www.uib.de Geschäftsführer: dr. detlef oertel & erol ueluekmen Handelsregister: Amtsgericht Mainz HRB 6942 -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

2 1

[opensuse-buildservice] Tumbleweed repository excluded
by Roger Oberholtzer 01 Aug '18

01 Aug '18

Why would the Tumbleweed repository be excluded on OBS? For example, I would like to build the following for Tumbleweed: https://build.opensuse.org/package/show/home:rogeroberholtzer/blt30 I don't see that I have configured this to be this way. Is it because enabling Tumbleweed for users would result in too much activity? If so, is my only alternative to build locally? -- Roger Oberholtzer -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

4 4